xref: /linux/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml (revision 726eded12dd72a7a823b7ff690c8e67abf78051f) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-mdss.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM7150 Display MDSS
8
9maintainers:
10  - Danila Tikhonov <danila@jiaxyga.com>
11
12description:
13  SM7150 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
14  DPU display controller, DSI and DP interfaces etc.
15
16$ref: /schemas/display/msm/mdss-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,sm7150-mdss
21
22  clocks:
23    items:
24      - description: Display ahb clock from gcc
25      - description: Display hf axi clock
26      - description: Display sf axi clock
27      - description: Display core clock
28
29  clock-names:
30    items:
31      - const: iface
32      - const: bus
33      - const: nrt_bus
34      - const: core
35
36  iommus:
37    maxItems: 1
38
39  interconnects:
40    items:
41      - description: Interconnect path from mdp0 port to the data bus
42      - description: Interconnect path from mdp1 port to the data bus
43      - description: Interconnect path from CPU to the reg bus
44
45  interconnect-names:
46    items:
47      - const: mdp0-mem
48      - const: mdp1-mem
49      - const: cpu-cfg
50
51patternProperties:
52  "^display-controller@[0-9a-f]+$":
53    type: object
54    additionalProperties: true
55    properties:
56      compatible:
57        const: qcom,sm7150-dpu
58
59  "^displayport-controller@[0-9a-f]+$":
60    type: object
61    additionalProperties: true
62    properties:
63      compatible:
64        const: qcom,sm7150-dp
65
66  "^dsi@[0-9a-f]+$":
67    type: object
68    additionalProperties: true
69    properties:
70      compatible:
71        items:
72          - const: qcom,sm7150-dsi-ctrl
73          - const: qcom,mdss-dsi-ctrl
74
75  "^phy@[0-9a-f]+$":
76    type: object
77    additionalProperties: true
78    properties:
79      compatible:
80        const: qcom,dsi-phy-10nm
81
82required:
83  - compatible
84
85unevaluatedProperties: false
86
87examples:
88  - |
89    #include <dt-bindings/clock/qcom,rpmh.h>
90    #include <dt-bindings/interconnect/qcom,icc.h>
91    #include <dt-bindings/interconnect/qcom,sm7150-rpmh.h>
92    #include <dt-bindings/interrupt-controller/arm-gic.h>
93    #include <dt-bindings/power/qcom,rpmhpd.h>
94
95    display-subsystem@ae00000 {
96        compatible = "qcom,sm7150-mdss";
97        reg = <0x0ae00000 0x1000>;
98        reg-names = "mdss";
99
100        power-domains = <&dispcc_mdss_gdsc>;
101
102        clocks = <&dispcc_mdss_ahb_clk>,
103                 <&gcc_disp_hf_axi_clk>,
104                 <&gcc_disp_sf_axi_clk>,
105                 <&dispcc_mdss_mdp_clk>;
106        clock-names = "iface",
107                      "bus",
108                      "nrt_bus",
109                      "core";
110
111        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
112        interrupt-controller;
113        #interrupt-cells = <1>;
114
115        interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
116                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
117                        <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
118                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
119                        <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
120                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
121        interconnect-names = "mdp0-mem",
122                             "mdp1-mem",
123                             "cpu-cfg";
124
125        iommus = <&apps_smmu 0x800 0x440>;
126
127        #address-cells = <1>;
128        #size-cells = <1>;
129        ranges;
130
131        display-controller@ae01000 {
132            compatible = "qcom,sm7150-dpu";
133            reg = <0x0ae01000 0x8f000>,
134                  <0x0aeb0000 0x2008>;
135            reg-names = "mdp", "vbif";
136
137            clocks = <&gcc_disp_hf_axi_clk>,
138                     <&dispcc_mdss_ahb_clk>,
139                     <&dispcc_mdss_rot_clk>,
140                     <&dispcc_mdss_mdp_lut_clk>,
141                     <&dispcc_mdss_mdp_clk>,
142                     <&dispcc_mdss_vsync_clk>;
143            clock-names = "bus",
144                          "iface",
145                          "rot",
146                          "lut",
147                          "core",
148                          "vsync";
149
150            assigned-clocks = <&dispcc_mdss_vsync_clk>;
151            assigned-clock-rates = <19200000>;
152
153            operating-points-v2 = <&mdp_opp_table>;
154            power-domains = <&rpmhpd RPMHPD_CX>;
155
156            interrupt-parent = <&mdss>;
157            interrupts = <0>;
158
159            ports {
160                #address-cells = <1>;
161                #size-cells = <0>;
162
163                port@0 {
164                    reg = <0>;
165                    dpu_intf1_out: endpoint {
166                        remote-endpoint = <&mdss_dsi0_in>;
167                    };
168                };
169
170                port@1 {
171                    reg = <1>;
172                    dpu_intf2_out: endpoint {
173                        remote-endpoint = <&mdss_dsi1_in>;
174                    };
175                };
176
177                port@2 {
178                    reg = <2>;
179                    dpu_intf0_out: endpoint {
180                        remote-endpoint = <&dp_in>;
181                    };
182                };
183            };
184
185            mdp_opp_table: opp-table {
186                compatible = "operating-points-v2";
187
188                opp-19200000 {
189                    opp-hz = /bits/ 64 <19200000>;
190                    required-opps = <&rpmhpd_opp_min_svs>;
191                };
192
193                opp-200000000 {
194                    opp-hz = /bits/ 64 <200000000>;
195                    required-opps = <&rpmhpd_opp_low_svs>;
196                };
197
198                opp-300000000 {
199                    opp-hz = /bits/ 64 <300000000>;
200                    required-opps = <&rpmhpd_opp_svs>;
201                };
202
203                opp-344000000 {
204                    opp-hz = /bits/ 64 <344000000>;
205                    required-opps = <&rpmhpd_opp_svs_l1>;
206                };
207
208                opp-430000000 {
209                    opp-hz = /bits/ 64 <430000000>;
210                    required-opps = <&rpmhpd_opp_nom>;
211                };
212            };
213        };
214
215        dsi@ae94000 {
216            compatible = "qcom,sm7150-dsi-ctrl",
217                         "qcom,mdss-dsi-ctrl";
218            reg = <0x0ae94000 0x400>;
219            reg-names = "dsi_ctrl";
220
221            interrupt-parent = <&mdss>;
222            interrupts = <4>;
223
224            clocks = <&dispcc_mdss_byte0_clk>,
225                     <&dispcc_mdss_byte0_intf_clk>,
226                     <&dispcc_mdss_pclk0_clk>,
227                     <&dispcc_mdss_esc0_clk>,
228                     <&dispcc_mdss_ahb_clk>,
229                     <&gcc_disp_hf_axi_clk>;
230            clock-names = "byte",
231                          "byte_intf",
232                          "pixel",
233                          "core",
234                          "iface",
235                          "bus";
236
237            assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
238                              <&dispcc_mdss_pclk0_clk_src>;
239            assigned-clock-parents = <&mdss_dsi0_phy 0>,
240                                     <&mdss_dsi0_phy 1>;
241
242            operating-points-v2 = <&dsi_opp_table>;
243            power-domains = <&rpmhpd RPMHPD_CX>;
244
245            phys = <&mdss_dsi0_phy>;
246            phy-names = "dsi";
247
248            #address-cells = <1>;
249            #size-cells = <0>;
250
251            ports {
252                #address-cells = <1>;
253                #size-cells = <0>;
254
255                port@0 {
256                    reg = <0>;
257                    mdss_dsi0_in: endpoint {
258                        remote-endpoint = <&dpu_intf1_out>;
259                    };
260                };
261
262                port@1 {
263                    reg = <1>;
264                    mdss_dsi0_out: endpoint {
265                    };
266                };
267            };
268
269            dsi_opp_table: opp-table {
270                compatible = "operating-points-v2";
271
272                opp-180000000 {
273                    opp-hz = /bits/ 64 <180000000>;
274                    required-opps = <&rpmhpd_opp_low_svs>;
275                };
276
277                opp-275000000 {
278                    opp-hz = /bits/ 64 <275000000>;
279                    required-opps = <&rpmhpd_opp_svs>;
280                };
281
282                opp-358000000 {
283                    opp-hz = /bits/ 64 <358000000>;
284                    required-opps = <&rpmhpd_opp_svs_l1>;
285                };
286            };
287        };
288
289        mdss_dsi0_phy: phy@ae94400 {
290            compatible = "qcom,dsi-phy-10nm";
291            reg = <0x0ae94400 0x200>,
292                  <0x0ae94600 0x280>,
293                  <0x0ae94a00 0x1e0>;
294            reg-names = "dsi_phy",
295                        "dsi_phy_lane",
296                        "dsi_pll";
297
298            #clock-cells = <1>;
299            #phy-cells = <0>;
300
301            clocks = <&dispcc_mdss_ahb_clk>,
302                     <&rpmhcc RPMH_CXO_CLK>;
303            clock-names = "iface", "ref";
304            vdds-supply = <&vdda_mipi_dsi0_pll>;
305        };
306
307        dsi@ae96000 {
308            compatible = "qcom,sm7150-dsi-ctrl",
309                         "qcom,mdss-dsi-ctrl";
310            reg = <0x0ae96000 0x400>;
311            reg-names = "dsi_ctrl";
312
313            interrupt-parent = <&mdss>;
314            interrupts = <5>;
315
316            clocks = <&dispcc_mdss_byte1_clk>,
317                     <&dispcc_mdss_byte1_intf_clk>,
318                     <&dispcc_mdss_pclk1_clk>,
319                     <&dispcc_mdss_esc1_clk>,
320                     <&dispcc_mdss_ahb_clk>,
321                     <&gcc_disp_hf_axi_clk>;
322            clock-names = "byte",
323                          "byte_intf",
324                          "pixel",
325                          "core",
326                          "iface",
327                          "bus";
328
329            assigned-clocks = <&dispcc_mdss_byte1_clk_src>,
330                              <&dispcc_mdss_pclk1_clk_src>;
331            assigned-clock-parents = <&mdss_dsi1_phy 0>,
332                                     <&mdss_dsi1_phy 1>;
333
334            operating-points-v2 = <&dsi_opp_table>;
335            power-domains = <&rpmhpd RPMHPD_CX>;
336
337            phys = <&mdss_dsi1_phy>;
338            phy-names = "dsi";
339
340            #address-cells = <1>;
341            #size-cells = <0>;
342
343            ports {
344                #address-cells = <1>;
345                #size-cells = <0>;
346
347                port@0 {
348                    reg = <0>;
349                    mdss_dsi1_in: endpoint {
350                        remote-endpoint = <&dpu_intf2_out>;
351                    };
352                };
353
354                port@1 {
355                    reg = <1>;
356                    mdss_dsi1_out: endpoint {
357                    };
358                };
359            };
360        };
361
362        mdss_dsi1_phy: phy@ae96400 {
363            compatible = "qcom,dsi-phy-10nm";
364            reg = <0x0ae96400 0x200>,
365                  <0x0ae96600 0x280>,
366                  <0x0ae96a00 0x1e0>;
367            reg-names = "dsi_phy",
368                        "dsi_phy_lane",
369                        "dsi_pll";
370
371            #clock-cells = <1>;
372            #phy-cells = <0>;
373
374            clocks = <&dispcc_mdss_ahb_clk>,
375                     <&rpmhcc RPMH_CXO_CLK>;
376            clock-names = "iface", "ref";
377            vdds-supply = <&vdda_mipi_dsi1_pll>;
378        };
379
380        displayport-controller@ae90000 {
381            compatible = "qcom,sm7150-dp";
382            reg = <0xae90000 0x200>,
383                  <0xae90200 0x200>,
384                  <0xae90400 0xc00>,
385                  <0xae91000 0x400>,
386                  <0xae91400 0x400>;
387
388            interrupt-parent = <&mdss>;
389            interrupts = <12>;
390
391            clocks = <&dispcc_mdss_ahb_clk>,
392                     <&dispcc_mdss_dp_aux_clk>,
393                     <&dispcc_mdss_dp_link_clk>,
394                     <&dispcc_mdss_dp_link_intf_clk>,
395                     <&dispcc_mdss_dp_pixel_clk>;
396            clock-names = "core_iface",
397                          "core_aux",
398                          "ctrl_link",
399                          "ctrl_link_iface",
400                          "stream_pixel";
401
402            assigned-clocks = <&dispcc_mdss_dp_link_clk_src>,
403                              <&dispcc_mdss_dp_pixel_clk_src>;
404            assigned-clock-parents = <&dp_phy 0>,
405                                     <&dp_phy 1>;
406
407            operating-points-v2 = <&dp_opp_table>;
408            power-domains = <&rpmhpd RPMHPD_CX>;
409
410            phys = <&dp_phy>;
411            phy-names = "dp";
412
413            #sound-dai-cells = <0>;
414
415            ports {
416                #address-cells = <1>;
417                #size-cells = <0>;
418
419                port@0 {
420                    reg = <0>;
421                    dp_in: endpoint {
422                        remote-endpoint = <&dpu_intf0_out>;
423                    };
424                };
425
426                port@1 {
427                    reg = <1>;
428                    dp_out: endpoint {
429                    };
430                };
431            };
432
433            dp_opp_table: opp-table {
434                compatible = "operating-points-v2";
435
436                opp-160000000 {
437                    opp-hz = /bits/ 64 <160000000>;
438                    required-opps = <&rpmhpd_opp_low_svs>;
439                };
440
441                opp-270000000 {
442                    opp-hz = /bits/ 64 <270000000>;
443                    required-opps = <&rpmhpd_opp_svs>;
444                };
445
446                opp-540000000 {
447                    opp-hz = /bits/ 64 <540000000>;
448                    required-opps = <&rpmhpd_opp_svs_l1>;
449                };
450
451                opp-810000000 {
452                    opp-hz = /bits/ 64 <810000000>;
453                    required-opps = <&rpmhpd_opp_nom>;
454                };
455            };
456        };
457    };
458...
459