1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: MediaTek DSI Controller 8 9maintainers: 10 - Chun-Kuang Hu <chunkuang.hu@kernel.org> 11 - Philipp Zabel <p.zabel@pengutronix.de> 12 - Jitao Shi <jitao.shi@mediatek.com> 13 14description: | 15 The MediaTek DSI function block is a sink of the display subsystem and can 16 drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- 17 channel output. 18 19allOf: 20 - $ref: /schemas/display/dsi-controller.yaml# 21 22properties: 23 compatible: 24 oneOf: 25 - enum: 26 - mediatek,mt2701-dsi 27 - mediatek,mt7623-dsi 28 - mediatek,mt8167-dsi 29 - mediatek,mt8173-dsi 30 - mediatek,mt8183-dsi 31 - mediatek,mt8186-dsi 32 - mediatek,mt8188-dsi 33 - items: 34 - enum: 35 - mediatek,mt6795-dsi 36 - const: mediatek,mt8173-dsi 37 - items: 38 - enum: 39 - mediatek,mt8195-dsi 40 - mediatek,mt8365-dsi 41 - const: mediatek,mt8183-dsi 42 43 reg: 44 maxItems: 1 45 46 interrupts: 47 maxItems: 1 48 49 power-domains: 50 maxItems: 1 51 52 clocks: 53 items: 54 - description: Engine Clock 55 - description: Digital Clock 56 - description: HS Clock 57 58 clock-names: 59 items: 60 - const: engine 61 - const: digital 62 - const: hs 63 64 resets: 65 maxItems: 1 66 67 phys: 68 maxItems: 1 69 70 phy-names: 71 items: 72 - const: dphy 73 74 port: 75 $ref: /schemas/graph.yaml#/properties/port 76 description: 77 Output port node. This port should be connected to the input 78 port of an attached DSI panel or DSI-to-eDP encoder chip. 79 80required: 81 - compatible 82 - reg 83 - interrupts 84 - power-domains 85 - clocks 86 - clock-names 87 - phys 88 - phy-names 89 - port 90 91unevaluatedProperties: false 92 93examples: 94 - | 95 #include <dt-bindings/clock/mt8183-clk.h> 96 #include <dt-bindings/interrupt-controller/arm-gic.h> 97 #include <dt-bindings/interrupt-controller/irq.h> 98 #include <dt-bindings/power/mt8183-power.h> 99 #include <dt-bindings/phy/phy.h> 100 #include <dt-bindings/reset/mt8183-resets.h> 101 102 soc { 103 #address-cells = <2>; 104 #size-cells = <2>; 105 106 dsi0: dsi@14014000 { 107 compatible = "mediatek,mt8183-dsi"; 108 reg = <0 0x14014000 0 0x1000>; 109 interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; 110 power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; 111 clocks = <&mmsys CLK_MM_DSI0_MM>, 112 <&mmsys CLK_MM_DSI0_IF>, 113 <&mipi_tx0>; 114 clock-names = "engine", "digital", "hs"; 115 resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; 116 phys = <&mipi_tx0>; 117 phy-names = "dphy"; 118 port { 119 dsi0_out: endpoint { 120 remote-endpoint = <&panel_in>; 121 }; 122 }; 123 }; 124 }; 125 126... 127