1PXA LCD Controller 2------------------ 3 4Required properties: 5 - compatible : one of these 6 "marvell,pxa2xx-lcdc", 7 "marvell,pxa270-lcdc", 8 "marvell,pxa300-lcdc" 9 - reg : should contain 1 register range (address and length). 10 - interrupts : framebuffer controller interrupt. 11 - clocks: phandle to input clocks 12 13Required nodes: 14 - port: connection to the LCD panel (see video-interfaces.txt) 15 This node must have its properties bus-width and remote-endpoint set. 16 If the panel is not a TFT color panel, then a "lcd-type" property in 17 the panel should specify the panel type. 18 This panel node should be in the board dts. 19 20Example: 21 lcd-controller@40500000 { 22 compatible = "marvell,pxa2xx-lcdc"; 23 reg = <0x44000000 0x10000>; 24 interrupts = <17>; 25 clocks = <&clks CLK_LCD>; 26 27 port { 28 lcdc_out: endpoint { 29 remote-endpoint = <&panel_in>; 30 bus-width = <16>; 31 }; 32 }; 33 }; 34