1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings 8 9description: | 10 The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller 11 IP with Allwinner\'s own PHY IP. It supports audio and video outputs 12 and CEC. 13 14 These DT bindings follow the Synopsys DWC HDMI TX bindings defined 15 in bridge/synopsys,dw-hdmi.yaml with the following device-specific 16 properties. 17 18maintainers: 19 - Chen-Yu Tsai <wens@csie.org> 20 - Maxime Ripard <mripard@kernel.org> 21 22properties: 23 "#phy-cells": 24 const: 0 25 26 compatible: 27 oneOf: 28 - const: allwinner,sun8i-a83t-dw-hdmi 29 - const: allwinner,sun50i-h6-dw-hdmi 30 31 - items: 32 - enum: 33 - allwinner,sun8i-h3-dw-hdmi 34 - allwinner,sun8i-r40-dw-hdmi 35 - allwinner,sun50i-a64-dw-hdmi 36 - const: allwinner,sun8i-a83t-dw-hdmi 37 38 reg: 39 maxItems: 1 40 41 reg-io-width: 42 const: 1 43 44 interrupts: 45 maxItems: 1 46 47 clocks: 48 minItems: 3 49 items: 50 - description: Bus Clock 51 - description: Register Clock 52 - description: TMDS Clock 53 - description: HDMI CEC Clock 54 - description: HDCP Clock 55 - description: HDCP Bus Clock 56 57 clock-names: 58 minItems: 3 59 items: 60 - const: iahb 61 - const: isfr 62 - const: tmds 63 - const: cec 64 - const: hdcp 65 - const: hdcp-bus 66 67 resets: 68 minItems: 1 69 items: 70 - description: HDMI Controller Reset 71 - description: HDCP Reset 72 73 reset-names: 74 minItems: 1 75 items: 76 - const: ctrl 77 - const: hdcp 78 79 phys: 80 maxItems: 1 81 description: 82 Phandle to the DWC HDMI PHY. 83 84 phy-names: 85 const: phy 86 87 hvcc-supply: 88 description: 89 The VCC power supply of the controller 90 91 ports: 92 $ref: /schemas/graph.yaml#/properties/ports 93 94 properties: 95 port@0: 96 $ref: /schemas/graph.yaml#/properties/port 97 description: | 98 Input endpoints of the controller. Usually the associated 99 TCON. 100 101 port@1: 102 $ref: /schemas/graph.yaml#/properties/port 103 description: | 104 Output endpoints of the controller. Usually an HDMI 105 connector. 106 107 required: 108 - port@0 109 - port@1 110 111required: 112 - compatible 113 - reg 114 - reg-io-width 115 - interrupts 116 - clocks 117 - clock-names 118 - resets 119 - reset-names 120 - phys 121 - phy-names 122 - ports 123 124if: 125 properties: 126 compatible: 127 contains: 128 enum: 129 - allwinner,sun50i-h6-dw-hdmi 130 131then: 132 properties: 133 clocks: 134 minItems: 6 135 136 clock-names: 137 minItems: 6 138 139 resets: 140 minItems: 2 141 142 reset-names: 143 minItems: 2 144 145 146additionalProperties: false 147 148examples: 149 - | 150 #include <dt-bindings/interrupt-controller/arm-gic.h> 151 152 /* 153 * This comes from the clock/sun8i-a83t-ccu.h and 154 * reset/sun8i-a83t-ccu.h headers, but we can't include them since 155 * it would trigger a bunch of warnings for redefinitions of 156 * symbols with the other example. 157 */ 158 #define CLK_BUS_HDMI 39 159 #define CLK_HDMI 93 160 #define CLK_HDMI_SLOW 94 161 #define RST_BUS_HDMI1 26 162 163 hdmi@1ee0000 { 164 compatible = "allwinner,sun8i-a83t-dw-hdmi"; 165 reg = <0x01ee0000 0x10000>; 166 reg-io-width = <1>; 167 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 168 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, 169 <&ccu CLK_HDMI>; 170 clock-names = "iahb", "isfr", "tmds"; 171 resets = <&ccu RST_BUS_HDMI1>; 172 reset-names = "ctrl"; 173 phys = <&hdmi_phy>; 174 phy-names = "phy"; 175 pinctrl-names = "default"; 176 pinctrl-0 = <&hdmi_pins>; 177 status = "disabled"; 178 179 ports { 180 #address-cells = <1>; 181 #size-cells = <0>; 182 183 port@0 { 184 reg = <0>; 185 186 endpoint { 187 remote-endpoint = <&tcon1_out_hdmi>; 188 }; 189 }; 190 191 port@1 { 192 reg = <1>; 193 }; 194 }; 195 }; 196 197 /* Cleanup after ourselves */ 198 #undef CLK_BUS_HDMI 199 #undef CLK_HDMI 200 #undef CLK_HDMI_SLOW 201 202 - | 203 #include <dt-bindings/interrupt-controller/arm-gic.h> 204 205 /* 206 * This comes from the clock/sun50i-h6-ccu.h and 207 * reset/sun50i-h6-ccu.h headers, but we can't include them since 208 * it would trigger a bunch of warnings for redefinitions of 209 * symbols with the other example. 210 */ 211 #define CLK_BUS_HDMI 126 212 #define CLK_BUS_HDCP 137 213 #define CLK_HDMI 123 214 #define CLK_HDMI_SLOW 124 215 #define CLK_HDMI_CEC 125 216 #define CLK_HDCP 136 217 #define RST_BUS_HDMI_SUB 57 218 #define RST_BUS_HDCP 62 219 220 hdmi@6000000 { 221 compatible = "allwinner,sun50i-h6-dw-hdmi"; 222 reg = <0x06000000 0x10000>; 223 reg-io-width = <1>; 224 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; 225 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, 226 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, 227 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; 228 clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", 229 "hdcp-bus"; 230 resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; 231 reset-names = "ctrl", "hdcp"; 232 phys = <&hdmi_phy>; 233 phy-names = "phy"; 234 pinctrl-names = "default"; 235 pinctrl-0 = <&hdmi_pins>; 236 status = "disabled"; 237 238 ports { 239 #address-cells = <1>; 240 #size-cells = <0>; 241 242 port@0 { 243 reg = <0>; 244 245 endpoint { 246 remote-endpoint = <&tcon_top_hdmi_out_hdmi>; 247 }; 248 }; 249 250 port@1 { 251 reg = <1>; 252 }; 253 }; 254 }; 255 256... 257