1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Allwinner A31 MIPI-DSI Controller 8 9maintainers: 10 - Chen-Yu Tsai <wens@csie.org> 11 - Maxime Ripard <mripard@kernel.org> 12 13properties: 14 compatible: 15 oneOf: 16 - enum: 17 - allwinner,sun6i-a31-mipi-dsi 18 - allwinner,sun50i-a64-mipi-dsi 19 - allwinner,sun50i-a100-mipi-dsi 20 - items: 21 - const: allwinner,sun20i-d1-mipi-dsi 22 - const: allwinner,sun50i-a100-mipi-dsi 23 24 reg: 25 maxItems: 1 26 27 interrupts: 28 maxItems: 1 29 30 clocks: 31 minItems: 1 32 items: 33 - description: Bus Clock 34 - description: Module Clock 35 36 clock-names: 37 items: 38 - const: bus 39 - const: mod 40 41 resets: 42 maxItems: 1 43 44 vcc-dsi-supply: 45 description: VCC-DSI power supply of the DSI encoder 46 47 phys: 48 maxItems: 1 49 50 phy-names: 51 const: dphy 52 53 port: 54 $ref: /schemas/graph.yaml#/properties/port 55 description: 56 The port should be the input endpoint, usually coming from the 57 associated TCON. 58 59required: 60 - compatible 61 - reg 62 - interrupts 63 - clocks 64 - phys 65 - phy-names 66 - resets 67 - port 68 69allOf: 70 - $ref: dsi-controller.yaml# 71 - if: 72 properties: 73 compatible: 74 contains: 75 enum: 76 - allwinner,sun6i-a31-mipi-dsi 77 - allwinner,sun50i-a100-mipi-dsi 78 79 then: 80 properties: 81 clocks: 82 minItems: 2 83 84 required: 85 - clock-names 86 87 else: 88 properties: 89 clocks: 90 maxItems: 1 91 92 - if: 93 properties: 94 compatible: 95 contains: 96 enum: 97 - allwinner,sun6i-a31-mipi-dsi 98 - allwinner,sun50i-a64-mipi-dsi 99 100 then: 101 required: 102 - vcc-dsi-supply 103 104unevaluatedProperties: false 105 106examples: 107 - | 108 dsi0: dsi@1ca0000 { 109 compatible = "allwinner,sun6i-a31-mipi-dsi"; 110 reg = <0x01ca0000 0x1000>; 111 interrupts = <0 89 4>; 112 clocks = <&ccu 23>, <&ccu 96>; 113 clock-names = "bus", "mod"; 114 resets = <&ccu 4>; 115 phys = <&dphy0>; 116 phy-names = "dphy"; 117 vcc-dsi-supply = <®_dcdc1>; 118 #address-cells = <1>; 119 #size-cells = <0>; 120 121 panel@0 { 122 compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; 123 reg = <0>; 124 power-supply = <®_display>; 125 reset-gpios = <&r_pio 0 5 1>; /* PL05 */ 126 backlight = <&pwm_bl>; 127 }; 128 129 port { 130 dsi0_in_tcon0: endpoint { 131 remote-endpoint = <&tcon0_out_dsi0>; 132 }; 133 }; 134 }; 135 136... 137