1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/arm/pmu.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ARM Performance Monitor Units 8 9maintainers: 10 - Mark Rutland <mark.rutland@arm.com> 11 - Will Deacon <will.deacon@arm.com> 12 13description: |+ 14 ARM cores often have a PMU for counting cpu and cache events like cache misses 15 and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU 16 representation in the device tree should be done as under:- 17 18properties: 19 compatible: 20 items: 21 - enum: 22 - apm,potenza-pmu 23 - apple,avalanche-pmu 24 - apple,blizzard-pmu 25 - apple,firestorm-pmu 26 - apple,icestorm-pmu 27 - arm,armv8-pmuv3 # Only for s/w models 28 - arm,arm1136-pmu 29 - arm,arm1176-pmu 30 - arm,arm11mpcore-pmu 31 - arm,cortex-a5-pmu 32 - arm,cortex-a7-pmu 33 - arm,cortex-a8-pmu 34 - arm,cortex-a9-pmu 35 - arm,cortex-a12-pmu 36 - arm,cortex-a15-pmu 37 - arm,cortex-a17-pmu 38 - arm,cortex-a32-pmu 39 - arm,cortex-a34-pmu 40 - arm,cortex-a35-pmu 41 - arm,cortex-a53-pmu 42 - arm,cortex-a55-pmu 43 - arm,cortex-a57-pmu 44 - arm,cortex-a65-pmu 45 - arm,cortex-a72-pmu 46 - arm,cortex-a73-pmu 47 - arm,cortex-a75-pmu 48 - arm,cortex-a76-pmu 49 - arm,cortex-a77-pmu 50 - arm,cortex-a78-pmu 51 - arm,cortex-a510-pmu 52 - arm,cortex-a520-pmu 53 - arm,cortex-a710-pmu 54 - arm,cortex-a715-pmu 55 - arm,cortex-a720-pmu 56 - arm,cortex-a725-pmu 57 - arm,cortex-x1-pmu 58 - arm,cortex-x2-pmu 59 - arm,cortex-x3-pmu 60 - arm,cortex-x4-pmu 61 - arm,cortex-x925-pmu 62 - arm,neoverse-e1-pmu 63 - arm,neoverse-n1-pmu 64 - arm,neoverse-n2-pmu 65 - arm,neoverse-n3-pmu 66 - arm,neoverse-v1-pmu 67 - arm,neoverse-v2-pmu 68 - arm,neoverse-v3-pmu 69 - arm,neoverse-v3ae-pmu 70 - brcm,vulcan-pmu 71 - cavium,thunder-pmu 72 - nvidia,denver-pmu 73 - nvidia,carmel-pmu 74 - qcom,krait-pmu 75 - qcom,scorpion-pmu 76 - qcom,scorpion-mp-pmu 77 - samsung,mongoose-pmu 78 79 interrupts: 80 # Don't know how many CPUs, so no constraints to specify 81 description: 1 per-cpu interrupt (PPI) or 1 interrupt per core. 82 83 interrupt-affinity: 84 $ref: /schemas/types.yaml#/definitions/phandle-array 85 items: 86 maxItems: 1 87 description: 88 When using SPIs, specifies a list of phandles to CPU 89 nodes corresponding directly to the affinity of 90 the SPIs listed in the interrupts property. 91 92 When using a PPI, specifies a list of phandles to CPU 93 nodes corresponding to the set of CPUs which have 94 a PMU of this type signalling the PPI listed in the 95 interrupts property, unless this is already specified 96 by the PPI interrupt specifier itself (in which case 97 the interrupt-affinity property shouldn't be present). 98 99 This property should be present when there is more than 100 a single SPI. 101 102 qcom,no-pc-write: 103 type: boolean 104 description: 105 Indicates that this PMU doesn't support the 0xc and 0xd events. 106 107 secure-reg-access: 108 type: boolean 109 description: 110 Indicates that the ARMv7 Secure Debug Enable Register 111 (SDER) is accessible. This will cause the driver to do 112 any setup required that is only possible in ARMv7 secure 113 state. If not present the ARMv7 SDER will not be touched, 114 which means the PMU may fail to operate unless external 115 code (bootloader or security monitor) has performed the 116 appropriate initialisation. Note that this property is 117 not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux 118 in Non-secure state. 119 120required: 121 - compatible 122 123additionalProperties: false 124 125... 126