1============================= 2Linux 2.6.x on MPC52xx family 3============================= 4 5For the latest info, go to https://www.246tNt.com/mpc52xx/ 6 7To compile/use : 8 9 - U-Boot:: 10 11 # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION 12 if you wish to ). 13 # make lite5200_defconfig 14 # make uImage 15 16 then, on U-boot: 17 => tftpboot 200000 uImage 18 => tftpboot 400000 pRamdisk 19 => bootm 200000 400000 20 21 - DBug:: 22 23 # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION 24 if you wish to ). 25 # make lite5200_defconfig 26 # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz 27 # make zImage.initrd 28 # make 29 30 then in DBug: 31 DBug> dn -i zImage.initrd.lite5200 32 33 34Some remarks: 35 36 - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100 37 is not supported, and I'm not sure anyone is interested in working on it 38 so. I didn't took 5xxx because there's apparently a lot of 5xxx that have 39 nothing to do with the MPC5200. I also included the 'MPC' for the same 40 reason. 41 - Of course, I inspired myself from the 2.4 port. If you think I forgot to 42 mention you/your company in the copyright of some code, I'll correct it 43 ASAP. 44