1============== 2CerfBoard/Cube 3============== 4 5*** The StrongARM version of the CerfBoard/Cube has been discontinued *** 6 7The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board 8that measures approximately 2" square. It includes an Ethernet 9controller, an RS232-compatible serial port, a USB function port, and 10one CompactFlash+ slot on the back. Pictures can be found at the 11Intrinsyc website, http://www.intrinsyc.com. 12 13This document describes the support in the Linux kernel for the 14Intrinsyc CerfBoard. 15 16Supported in this version 17========================= 18 19 - CompactFlash+ slot (select PCMCIA in General Setup and any options 20 that may be required) 21 - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in 22 Network Devices) 23 - Serial ports with a serial console (hardcoded to 38400 8N1) 24 25In order to get this kernel onto your Cerf, you need a server that runs 26both BOOTP and TFTP. Detailed instructions should have come with your 27evaluation kit on how to use the bootloader. This series of commands 28will suffice:: 29 30 make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig 31 make ARCH=arm CROSS_COMPILE=arm-linux- zImage 32 make ARCH=arm CROSS_COMPILE=arm-linux- modules 33 cp arch/arm/boot/zImage <TFTP directory> 34 35support@intrinsyc.com 36