xref: /linux/Documentation/admin-guide/mm/transhuge.rst (revision 90d32e92011eaae8e70a9169b4e7acf4ca8f9d3a)
1============================
2Transparent Hugepage Support
3============================
4
5Objective
6=========
7
8Performance critical computing applications dealing with large memory
9working sets are already running on top of libhugetlbfs and in turn
10hugetlbfs. Transparent HugePage Support (THP) is an alternative mean of
11using huge pages for the backing of virtual memory with huge pages
12that supports the automatic promotion and demotion of page sizes and
13without the shortcomings of hugetlbfs.
14
15Currently THP only works for anonymous memory mappings and tmpfs/shmem.
16But in the future it can expand to other filesystems.
17
18.. note::
19   in the examples below we presume that the basic page size is 4K and
20   the huge page size is 2M, although the actual numbers may vary
21   depending on the CPU architecture.
22
23The reason applications are running faster is because of two
24factors. The first factor is almost completely irrelevant and it's not
25of significant interest because it'll also have the downside of
26requiring larger clear-page copy-page in page faults which is a
27potentially negative effect. The first factor consists in taking a
28single page fault for each 2M virtual region touched by userland (so
29reducing the enter/exit kernel frequency by a 512 times factor). This
30only matters the first time the memory is accessed for the lifetime of
31a memory mapping. The second long lasting and much more important
32factor will affect all subsequent accesses to the memory for the whole
33runtime of the application. The second factor consist of two
34components:
35
361) the TLB miss will run faster (especially with virtualization using
37   nested pagetables but almost always also on bare metal without
38   virtualization)
39
402) a single TLB entry will be mapping a much larger amount of virtual
41   memory in turn reducing the number of TLB misses. With
42   virtualization and nested pagetables the TLB can be mapped of
43   larger size only if both KVM and the Linux guest are using
44   hugepages but a significant speedup already happens if only one of
45   the two is using hugepages just because of the fact the TLB miss is
46   going to run faster.
47
48Modern kernels support "multi-size THP" (mTHP), which introduces the
49ability to allocate memory in blocks that are bigger than a base page
50but smaller than traditional PMD-size (as described above), in
51increments of a power-of-2 number of pages. mTHP can back anonymous
52memory (for example 16K, 32K, 64K, etc). These THPs continue to be
53PTE-mapped, but in many cases can still provide similar benefits to
54those outlined above: Page faults are significantly reduced (by a
55factor of e.g. 4, 8, 16, etc), but latency spikes are much less
56prominent because the size of each page isn't as huge as the PMD-sized
57variant and there is less memory to clear in each page fault. Some
58architectures also employ TLB compression mechanisms to squeeze more
59entries in when a set of PTEs are virtually and physically contiguous
60and approporiately aligned. In this case, TLB misses will occur less
61often.
62
63THP can be enabled system wide or restricted to certain tasks or even
64memory ranges inside task's address space. Unless THP is completely
65disabled, there is ``khugepaged`` daemon that scans memory and
66collapses sequences of basic pages into PMD-sized huge pages.
67
68The THP behaviour is controlled via :ref:`sysfs <thp_sysfs>`
69interface and using madvise(2) and prctl(2) system calls.
70
71Transparent Hugepage Support maximizes the usefulness of free memory
72if compared to the reservation approach of hugetlbfs by allowing all
73unused memory to be used as cache or other movable (or even unmovable
74entities). It doesn't require reservation to prevent hugepage
75allocation failures to be noticeable from userland. It allows paging
76and all other advanced VM features to be available on the
77hugepages. It requires no modifications for applications to take
78advantage of it.
79
80Applications however can be further optimized to take advantage of
81this feature, like for example they've been optimized before to avoid
82a flood of mmap system calls for every malloc(4k). Optimizing userland
83is by far not mandatory and khugepaged already can take care of long
84lived page allocations even for hugepage unaware applications that
85deals with large amounts of memory.
86
87In certain cases when hugepages are enabled system wide, application
88may end up allocating more memory resources. An application may mmap a
89large region but only touch 1 byte of it, in that case a 2M page might
90be allocated instead of a 4k page for no good. This is why it's
91possible to disable hugepages system-wide and to only have them inside
92MADV_HUGEPAGE madvise regions.
93
94Embedded systems should enable hugepages only inside madvise regions
95to eliminate any risk of wasting any precious byte of memory and to
96only run faster.
97
98Applications that gets a lot of benefit from hugepages and that don't
99risk to lose memory by using hugepages, should use
100madvise(MADV_HUGEPAGE) on their critical mmapped regions.
101
102.. _thp_sysfs:
103
104sysfs
105=====
106
107Global THP controls
108-------------------
109
110Transparent Hugepage Support for anonymous memory can be entirely disabled
111(mostly for debugging purposes) or only enabled inside MADV_HUGEPAGE
112regions (to avoid the risk of consuming more memory resources) or enabled
113system wide. This can be achieved per-supported-THP-size with one of::
114
115	echo always >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
116	echo madvise >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
117	echo never >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
118
119where <size> is the hugepage size being addressed, the available sizes
120for which vary by system.
121
122For example::
123
124	echo always >/sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
125
126Alternatively it is possible to specify that a given hugepage size
127will inherit the top-level "enabled" value::
128
129	echo inherit >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
130
131For example::
132
133	echo inherit >/sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
134
135The top-level setting (for use with "inherit") can be set by issuing
136one of the following commands::
137
138	echo always >/sys/kernel/mm/transparent_hugepage/enabled
139	echo madvise >/sys/kernel/mm/transparent_hugepage/enabled
140	echo never >/sys/kernel/mm/transparent_hugepage/enabled
141
142By default, PMD-sized hugepages have enabled="inherit" and all other
143hugepage sizes have enabled="never". If enabling multiple hugepage
144sizes, the kernel will select the most appropriate enabled size for a
145given allocation.
146
147It's also possible to limit defrag efforts in the VM to generate
148anonymous hugepages in case they're not immediately free to madvise
149regions or to never try to defrag memory and simply fallback to regular
150pages unless hugepages are immediately available. Clearly if we spend CPU
151time to defrag memory, we would expect to gain even more by the fact we
152use hugepages later instead of regular pages. This isn't always
153guaranteed, but it may be more likely in case the allocation is for a
154MADV_HUGEPAGE region.
155
156::
157
158	echo always >/sys/kernel/mm/transparent_hugepage/defrag
159	echo defer >/sys/kernel/mm/transparent_hugepage/defrag
160	echo defer+madvise >/sys/kernel/mm/transparent_hugepage/defrag
161	echo madvise >/sys/kernel/mm/transparent_hugepage/defrag
162	echo never >/sys/kernel/mm/transparent_hugepage/defrag
163
164always
165	means that an application requesting THP will stall on
166	allocation failure and directly reclaim pages and compact
167	memory in an effort to allocate a THP immediately. This may be
168	desirable for virtual machines that benefit heavily from THP
169	use and are willing to delay the VM start to utilise them.
170
171defer
172	means that an application will wake kswapd in the background
173	to reclaim pages and wake kcompactd to compact memory so that
174	THP is available in the near future. It's the responsibility
175	of khugepaged to then install the THP pages later.
176
177defer+madvise
178	will enter direct reclaim and compaction like ``always``, but
179	only for regions that have used madvise(MADV_HUGEPAGE); all
180	other regions will wake kswapd in the background to reclaim
181	pages and wake kcompactd to compact memory so that THP is
182	available in the near future.
183
184madvise
185	will enter direct reclaim like ``always`` but only for regions
186	that are have used madvise(MADV_HUGEPAGE). This is the default
187	behaviour.
188
189never
190	should be self-explanatory.
191
192By default kernel tries to use huge, PMD-mappable zero page on read
193page fault to anonymous mapping. It's possible to disable huge zero
194page by writing 0 or enable it back by writing 1::
195
196	echo 0 >/sys/kernel/mm/transparent_hugepage/use_zero_page
197	echo 1 >/sys/kernel/mm/transparent_hugepage/use_zero_page
198
199Some userspace (such as a test program, or an optimized memory
200allocation library) may want to know the size (in bytes) of a
201PMD-mappable transparent hugepage::
202
203	cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
204
205khugepaged will be automatically started when one or more hugepage
206sizes are enabled (either by directly setting "always" or "madvise",
207or by setting "inherit" while the top-level enabled is set to "always"
208or "madvise"), and it'll be automatically shutdown when the last
209hugepage size is disabled (either by directly setting "never", or by
210setting "inherit" while the top-level enabled is set to "never").
211
212Khugepaged controls
213-------------------
214
215.. note::
216   khugepaged currently only searches for opportunities to collapse to
217   PMD-sized THP and no attempt is made to collapse to other THP
218   sizes.
219
220khugepaged runs usually at low frequency so while one may not want to
221invoke defrag algorithms synchronously during the page faults, it
222should be worth invoking defrag at least in khugepaged. However it's
223also possible to disable defrag in khugepaged by writing 0 or enable
224defrag in khugepaged by writing 1::
225
226	echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
227	echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
228
229You can also control how many pages khugepaged should scan at each
230pass::
231
232	/sys/kernel/mm/transparent_hugepage/khugepaged/pages_to_scan
233
234and how many milliseconds to wait in khugepaged between each pass (you
235can set this to 0 to run khugepaged at 100% utilization of one core)::
236
237	/sys/kernel/mm/transparent_hugepage/khugepaged/scan_sleep_millisecs
238
239and how many milliseconds to wait in khugepaged if there's an hugepage
240allocation failure to throttle the next allocation attempt::
241
242	/sys/kernel/mm/transparent_hugepage/khugepaged/alloc_sleep_millisecs
243
244The khugepaged progress can be seen in the number of pages collapsed (note
245that this counter may not be an exact count of the number of pages
246collapsed, since "collapsed" could mean multiple things: (1) A PTE mapping
247being replaced by a PMD mapping, or (2) All 4K physical pages replaced by
248one 2M hugepage. Each may happen independently, or together, depending on
249the type of memory and the failures that occur. As such, this value should
250be interpreted roughly as a sign of progress, and counters in /proc/vmstat
251consulted for more accurate accounting)::
252
253	/sys/kernel/mm/transparent_hugepage/khugepaged/pages_collapsed
254
255for each pass::
256
257	/sys/kernel/mm/transparent_hugepage/khugepaged/full_scans
258
259``max_ptes_none`` specifies how many extra small pages (that are
260not already mapped) can be allocated when collapsing a group
261of small pages into one large page::
262
263	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
264
265A higher value leads to use additional memory for programs.
266A lower value leads to gain less thp performance. Value of
267max_ptes_none can waste cpu time very little, you can
268ignore it.
269
270``max_ptes_swap`` specifies how many pages can be brought in from
271swap when collapsing a group of pages into a transparent huge page::
272
273	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_swap
274
275A higher value can cause excessive swap IO and waste
276memory. A lower value can prevent THPs from being
277collapsed, resulting fewer pages being collapsed into
278THPs, and lower memory access performance.
279
280``max_ptes_shared`` specifies how many pages can be shared across multiple
281processes. khugepaged might treat pages of THPs as shared if any page of
282that THP is shared. Exceeding the number would block the collapse::
283
284	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared
285
286A higher value may increase memory footprint for some workloads.
287
288Boot parameter
289==============
290
291You can change the sysfs boot time defaults of Transparent Hugepage
292Support by passing the parameter ``transparent_hugepage=always`` or
293``transparent_hugepage=madvise`` or ``transparent_hugepage=never``
294to the kernel command line.
295
296Hugepages in tmpfs/shmem
297========================
298
299You can control hugepage allocation policy in tmpfs with mount option
300``huge=``. It can have following values:
301
302always
303    Attempt to allocate huge pages every time we need a new page;
304
305never
306    Do not allocate huge pages;
307
308within_size
309    Only allocate huge page if it will be fully within i_size.
310    Also respect fadvise()/madvise() hints;
311
312advise
313    Only allocate huge pages if requested with fadvise()/madvise();
314
315The default policy is ``never``.
316
317``mount -o remount,huge= /mountpoint`` works fine after mount: remounting
318``huge=never`` will not attempt to break up huge pages at all, just stop more
319from being allocated.
320
321There's also sysfs knob to control hugepage allocation policy for internal
322shmem mount: /sys/kernel/mm/transparent_hugepage/shmem_enabled. The mount
323is used for SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or
324MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem.
325
326In addition to policies listed above, shmem_enabled allows two further
327values:
328
329deny
330    For use in emergencies, to force the huge option off from
331    all mounts;
332force
333    Force the huge option on for all - very useful for testing;
334
335Need of application restart
336===========================
337
338The transparent_hugepage/enabled and
339transparent_hugepage/hugepages-<size>kB/enabled values and tmpfs mount
340option only affect future behavior. So to make them effective you need
341to restart any application that could have been using hugepages. This
342also applies to the regions registered in khugepaged.
343
344Monitoring usage
345================
346
347.. note::
348   Currently the below counters only record events relating to
349   PMD-sized THP. Events relating to other THP sizes are not included.
350
351The number of PMD-sized anonymous transparent huge pages currently used by the
352system is available by reading the AnonHugePages field in ``/proc/meminfo``.
353To identify what applications are using PMD-sized anonymous transparent huge
354pages, it is necessary to read ``/proc/PID/smaps`` and count the AnonHugePages
355fields for each mapping. (Note that AnonHugePages only applies to traditional
356PMD-sized THP for historical reasons and should have been called
357AnonHugePmdMapped).
358
359The number of file transparent huge pages mapped to userspace is available
360by reading ShmemPmdMapped and ShmemHugePages fields in ``/proc/meminfo``.
361To identify what applications are mapping file transparent huge pages, it
362is necessary to read ``/proc/PID/smaps`` and count the FileHugeMapped fields
363for each mapping.
364
365Note that reading the smaps file is expensive and reading it
366frequently will incur overhead.
367
368There are a number of counters in ``/proc/vmstat`` that may be used to
369monitor how successfully the system is providing huge pages for use.
370
371thp_fault_alloc
372	is incremented every time a huge page is successfully
373	allocated and charged to handle a page fault.
374
375thp_collapse_alloc
376	is incremented by khugepaged when it has found
377	a range of pages to collapse into one huge page and has
378	successfully allocated a new huge page to store the data.
379
380thp_fault_fallback
381	is incremented if a page fault fails to allocate or charge
382	a huge page and instead falls back to using small pages.
383
384thp_fault_fallback_charge
385	is incremented if a page fault fails to charge a huge page and
386	instead falls back to using small pages even though the
387	allocation was successful.
388
389thp_collapse_alloc_failed
390	is incremented if khugepaged found a range
391	of pages that should be collapsed into one huge page but failed
392	the allocation.
393
394thp_file_alloc
395	is incremented every time a file huge page is successfully
396	allocated.
397
398thp_file_fallback
399	is incremented if a file huge page is attempted to be allocated
400	but fails and instead falls back to using small pages.
401
402thp_file_fallback_charge
403	is incremented if a file huge page cannot be charged and instead
404	falls back to using small pages even though the allocation was
405	successful.
406
407thp_file_mapped
408	is incremented every time a file huge page is mapped into
409	user address space.
410
411thp_split_page
412	is incremented every time a huge page is split into base
413	pages. This can happen for a variety of reasons but a common
414	reason is that a huge page is old and is being reclaimed.
415	This action implies splitting all PMD the page mapped with.
416
417thp_split_page_failed
418	is incremented if kernel fails to split huge
419	page. This can happen if the page was pinned by somebody.
420
421thp_deferred_split_page
422	is incremented when a huge page is put onto split
423	queue. This happens when a huge page is partially unmapped and
424	splitting it would free up some memory. Pages on split queue are
425	going to be split under memory pressure.
426
427thp_split_pmd
428	is incremented every time a PMD split into table of PTEs.
429	This can happen, for instance, when application calls mprotect() or
430	munmap() on part of huge page. It doesn't split huge page, only
431	page table entry.
432
433thp_zero_page_alloc
434	is incremented every time a huge zero page used for thp is
435	successfully allocated. Note, it doesn't count every map of
436	the huge zero page, only its allocation.
437
438thp_zero_page_alloc_failed
439	is incremented if kernel fails to allocate
440	huge zero page and falls back to using small pages.
441
442thp_swpout
443	is incremented every time a huge page is swapout in one
444	piece without splitting.
445
446thp_swpout_fallback
447	is incremented if a huge page has to be split before swapout.
448	Usually because failed to allocate some continuous swap space
449	for the huge page.
450
451In /sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/stats, There are
452also individual counters for each huge page size, which can be utilized to
453monitor the system's effectiveness in providing huge pages for usage. Each
454counter has its own corresponding file.
455
456anon_fault_alloc
457	is incremented every time a huge page is successfully
458	allocated and charged to handle a page fault.
459
460anon_fault_fallback
461	is incremented if a page fault fails to allocate or charge
462	a huge page and instead falls back to using huge pages with
463	lower orders or small pages.
464
465anon_fault_fallback_charge
466	is incremented if a page fault fails to charge a huge page and
467	instead falls back to using huge pages with lower orders or
468	small pages even though the allocation was successful.
469
470anon_swpout
471	is incremented every time a huge page is swapped out in one
472	piece without splitting.
473
474anon_swpout_fallback
475	is incremented if a huge page has to be split before swapout.
476	Usually because failed to allocate some continuous swap space
477	for the huge page.
478
479As the system ages, allocating huge pages may be expensive as the
480system uses memory compaction to copy data around memory to free a
481huge page for use. There are some counters in ``/proc/vmstat`` to help
482monitor this overhead.
483
484compact_stall
485	is incremented every time a process stalls to run
486	memory compaction so that a huge page is free for use.
487
488compact_success
489	is incremented if the system compacted memory and
490	freed a huge page for use.
491
492compact_fail
493	is incremented if the system tries to compact memory
494	but failed.
495
496It is possible to establish how long the stalls were using the function
497tracer to record how long was spent in __alloc_pages() and
498using the mm_page_alloc tracepoint to identify which allocations were
499for huge pages.
500
501Optimizing the applications
502===========================
503
504To be guaranteed that the kernel will map a THP immediately in any
505memory region, the mmap region has to be hugepage naturally
506aligned. posix_memalign() can provide that guarantee.
507
508Hugetlbfs
509=========
510
511You can use hugetlbfs on a kernel that has transparent hugepage
512support enabled just fine as always. No difference can be noted in
513hugetlbfs other than there will be less overall fragmentation. All
514usual features belonging to hugetlbfs are preserved and
515unaffected. libhugetlbfs will also work fine as usual.
516