1======================= 2Kernel Samepage Merging 3======================= 4 5Overview 6======== 7 8KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y, 9added to the Linux kernel in 2.6.32. See ``mm/ksm.c`` for its implementation, 10and http://lwn.net/Articles/306704/ and https://lwn.net/Articles/330589/ 11 12KSM was originally developed for use with KVM (where it was known as 13Kernel Shared Memory), to fit more virtual machines into physical memory, 14by sharing the data common between them. But it can be useful to any 15application which generates many instances of the same data. 16 17The KSM daemon ksmd periodically scans those areas of user memory 18which have been registered with it, looking for pages of identical 19content which can be replaced by a single write-protected page (which 20is automatically copied if a process later wants to update its 21content). The amount of pages that KSM daemon scans in a single pass 22and the time between the passes are configured using :ref:`sysfs 23interface <ksm_sysfs>` 24 25KSM only merges anonymous (private) pages, never pagecache (file) pages. 26KSM's merged pages were originally locked into kernel memory, but can now 27be swapped out just like other user pages (but sharing is broken when they 28are swapped back in: ksmd must rediscover their identity and merge again). 29 30Controlling KSM with madvise 31============================ 32 33KSM only operates on those areas of address space which an application 34has advised to be likely candidates for merging, by using the madvise(2) 35system call:: 36 37 int madvise(addr, length, MADV_MERGEABLE) 38 39The app may call 40 41:: 42 43 int madvise(addr, length, MADV_UNMERGEABLE) 44 45to cancel that advice and restore unshared pages: whereupon KSM 46unmerges whatever it merged in that range. Note: this unmerging call 47may suddenly require more memory than is available - possibly failing 48with EAGAIN, but more probably arousing the Out-Of-Memory killer. 49 50If KSM is not configured into the running kernel, madvise MADV_MERGEABLE 51and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was 52built with CONFIG_KSM=y, those calls will normally succeed: even if the 53KSM daemon is not currently running, MADV_MERGEABLE still registers 54the range for whenever the KSM daemon is started; even if the range 55cannot contain any pages which KSM could actually merge; even if 56MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE. 57 58If a region of memory must be split into at least one new MADV_MERGEABLE 59or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process 60will exceed ``vm.max_map_count`` (see Documentation/admin-guide/sysctl/vm.rst). 61 62Like other madvise calls, they are intended for use on mapped areas of 63the user address space: they will report ENOMEM if the specified range 64includes unmapped gaps (though working on the intervening mapped areas), 65and might fail with EAGAIN if not enough memory for internal structures. 66 67Applications should be considerate in their use of MADV_MERGEABLE, 68restricting its use to areas likely to benefit. KSM's scans may use a lot 69of processing power: some installations will disable KSM for that reason. 70 71.. _ksm_sysfs: 72 73KSM daemon sysfs interface 74========================== 75 76The KSM daemon is controlled by sysfs files in ``/sys/kernel/mm/ksm/``, 77readable by all but writable only by root: 78 79pages_to_scan 80 how many pages to scan before ksmd goes to sleep 81 e.g. ``echo 100 > /sys/kernel/mm/ksm/pages_to_scan``. 82 83 The pages_to_scan value cannot be changed if ``advisor_mode`` has 84 been set to scan-time. 85 86 Default: 100 (chosen for demonstration purposes) 87 88sleep_millisecs 89 how many milliseconds ksmd should sleep before next scan 90 e.g. ``echo 20 > /sys/kernel/mm/ksm/sleep_millisecs`` 91 92 Default: 20 (chosen for demonstration purposes) 93 94merge_across_nodes 95 specifies if pages from different NUMA nodes can be merged. 96 When set to 0, ksm merges only pages which physically reside 97 in the memory area of same NUMA node. That brings lower 98 latency to access of shared pages. Systems with more nodes, at 99 significant NUMA distances, are likely to benefit from the 100 lower latency of setting 0. Smaller systems, which need to 101 minimize memory usage, are likely to benefit from the greater 102 sharing of setting 1 (default). You may wish to compare how 103 your system performs under each setting, before deciding on 104 which to use. ``merge_across_nodes`` setting can be changed only 105 when there are no ksm shared pages in the system: set run 2 to 106 unmerge pages first, then to 1 after changing 107 ``merge_across_nodes``, to remerge according to the new setting. 108 109 Default: 1 (merging across nodes as in earlier releases) 110 111run 112 * set to 0 to stop ksmd from running but keep merged pages, 113 * set to 1 to run ksmd e.g. ``echo 1 > /sys/kernel/mm/ksm/run``, 114 * set to 2 to stop ksmd and unmerge all pages currently merged, but 115 leave mergeable areas registered for next run. 116 117 Default: 0 (must be changed to 1 to activate KSM, except if 118 CONFIG_SYSFS is disabled) 119 120use_zero_pages 121 specifies whether empty pages (i.e. allocated pages that only 122 contain zeroes) should be treated specially. When set to 1, 123 empty pages are merged with the kernel zero page(s) instead of 124 with each other as it would happen normally. This can improve 125 the performance on architectures with coloured zero pages, 126 depending on the workload. Care should be taken when enabling 127 this setting, as it can potentially degrade the performance of 128 KSM for some workloads, for example if the checksums of pages 129 candidate for merging match the checksum of an empty 130 page. This setting can be changed at any time, it is only 131 effective for pages merged after the change. 132 133 Default: 0 (normal KSM behaviour as in earlier releases) 134 135max_page_sharing 136 Maximum sharing allowed for each KSM page. This enforces a 137 deduplication limit to avoid high latency for virtual memory 138 operations that involve traversal of the virtual mappings that 139 share the KSM page. The minimum value is 2 as a newly created 140 KSM page will have at least two sharers. The higher this value 141 the faster KSM will merge the memory and the higher the 142 deduplication factor will be, but the slower the worst case 143 virtual mappings traversal could be for any given KSM 144 page. Slowing down this traversal means there will be higher 145 latency for certain virtual memory operations happening during 146 swapping, compaction, NUMA balancing and page migration, in 147 turn decreasing responsiveness for the caller of those virtual 148 memory operations. The scheduler latency of other tasks not 149 involved with the VM operations doing the virtual mappings 150 traversal is not affected by this parameter as these 151 traversals are always schedule friendly themselves. 152 153stable_node_chains_prune_millisecs 154 specifies how frequently KSM checks the metadata of the pages 155 that hit the deduplication limit for stale information. 156 Smaller milllisecs values will free up the KSM metadata with 157 lower latency, but they will make ksmd use more CPU during the 158 scan. It's a noop if not a single KSM page hit the 159 ``max_page_sharing`` yet. 160 161smart_scan 162 Historically KSM checked every candidate page for each scan. It did 163 not take into account historic information. When smart scan is 164 enabled, pages that have previously not been de-duplicated get 165 skipped. How often these pages are skipped depends on how often 166 de-duplication has already been tried and failed. By default this 167 optimization is enabled. The ``pages_skipped`` metric shows how 168 effective the setting is. 169 170advisor_mode 171 The ``advisor_mode`` selects the current advisor. Two modes are 172 supported: none and scan-time. The default is none. By setting 173 ``advisor_mode`` to scan-time, the scan time advisor is enabled. 174 The section about ``advisor`` explains in detail how the scan time 175 advisor works. 176 177adivsor_max_cpu 178 specifies the upper limit of the cpu percent usage of the ksmd 179 background thread. The default is 70. 180 181advisor_target_scan_time 182 specifies the target scan time in seconds to scan all the candidate 183 pages. The default value is 200 seconds. 184 185advisor_min_pages_to_scan 186 specifies the lower limit of the ``pages_to_scan`` parameter of the 187 scan time advisor. The default is 500. 188 189adivsor_max_pages_to_scan 190 specifies the upper limit of the ``pages_to_scan`` parameter of the 191 scan time advisor. The default is 30000. 192 193The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``: 194 195general_profit 196 how effective is KSM. The calculation is explained below. 197pages_scanned 198 how many pages are being scanned for ksm 199pages_shared 200 how many shared pages are being used 201pages_sharing 202 how many more sites are sharing them i.e. how much saved 203pages_unshared 204 how many pages unique but repeatedly checked for merging 205pages_volatile 206 how many pages changing too fast to be placed in a tree 207pages_skipped 208 how many pages did the "smart" page scanning algorithm skip 209full_scans 210 how many times all mergeable areas have been scanned 211stable_node_chains 212 the number of KSM pages that hit the ``max_page_sharing`` limit 213stable_node_dups 214 number of duplicated KSM pages 215ksm_zero_pages 216 how many zero pages that are still mapped into processes were mapped by 217 KSM when deduplicating. 218 219When ``use_zero_pages`` is/was enabled, the sum of ``pages_sharing`` + 220``ksm_zero_pages`` represents the actual number of pages saved by KSM. 221if ``use_zero_pages`` has never been enabled, ``ksm_zero_pages`` is 0. 222 223A high ratio of ``pages_sharing`` to ``pages_shared`` indicates good 224sharing, but a high ratio of ``pages_unshared`` to ``pages_sharing`` 225indicates wasted effort. ``pages_volatile`` embraces several 226different kinds of activity, but a high proportion there would also 227indicate poor use of madvise MADV_MERGEABLE. 228 229The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the 230``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must 231be increased accordingly. 232 233Monitoring KSM profit 234===================== 235 236KSM can save memory by merging identical pages, but also can consume 237additional memory, because it needs to generate a number of rmap_items to 238save each scanned page's brief rmap information. Some of these pages may 239be merged, but some may not be abled to be merged after being checked 240several times, which are unprofitable memory consumed. 241 2421) How to determine whether KSM save memory or consume memory in system-wide 243 range? Here is a simple approximate calculation for reference:: 244 245 general_profit =~ ksm_saved_pages * sizeof(page) - (all_rmap_items) * 246 sizeof(rmap_item); 247 248 where ksm_saved_pages equals to the sum of ``pages_sharing`` + 249 ``ksm_zero_pages`` of the system, and all_rmap_items can be easily 250 obtained by summing ``pages_sharing``, ``pages_shared``, ``pages_unshared`` 251 and ``pages_volatile``. 252 2532) The KSM profit inner a single process can be similarly obtained by the 254 following approximate calculation:: 255 256 process_profit =~ ksm_saved_pages * sizeof(page) - 257 ksm_rmap_items * sizeof(rmap_item). 258 259 where ksm_saved_pages equals to the sum of ``ksm_merging_pages`` and 260 ``ksm_zero_pages``, both of which are shown under the directory 261 ``/proc/<pid>/ksm_stat``, and ksm_rmap_items is also shown in 262 ``/proc/<pid>/ksm_stat``. The process profit is also shown in 263 ``/proc/<pid>/ksm_stat`` as ksm_process_profit. 264 265From the perspective of application, a high ratio of ``ksm_rmap_items`` to 266``ksm_merging_pages`` means a bad madvise-applied policy, so developers or 267administrators have to rethink how to change madvise policy. Giving an example 268for reference, a page's size is usually 4K, and the rmap_item's size is 269separately 32B on 32-bit CPU architecture and 64B on 64-bit CPU architecture. 270so if the ``ksm_rmap_items/ksm_merging_pages`` ratio exceeds 64 on 64-bit CPU 271or exceeds 128 on 32-bit CPU, then the app's madvise policy should be dropped, 272because the ksm profit is approximately zero or negative. 273 274Monitoring KSM events 275===================== 276 277There are some counters in /proc/vmstat that may be used to monitor KSM events. 278KSM might help save memory, it's a tradeoff by may suffering delay on KSM COW 279or on swapping in copy. Those events could help users evaluate whether or how 280to use KSM. For example, if cow_ksm increases too fast, user may decrease the 281range of madvise(, , MADV_MERGEABLE). 282 283cow_ksm 284 is incremented every time a KSM page triggers copy on write (COW) 285 when users try to write to a KSM page, we have to make a copy. 286 287ksm_swpin_copy 288 is incremented every time a KSM page is copied when swapping in 289 note that KSM page might be copied when swapping in because do_swap_page() 290 cannot do all the locking needed to reconstitute a cross-anon_vma KSM page. 291 292Advisor 293======= 294 295The number of candidate pages for KSM is dynamic. It can be often observed 296that during the startup of an application more candidate pages need to be 297processed. Without an advisor the ``pages_to_scan`` parameter needs to be 298sized for the maximum number of candidate pages. The scan time advisor can 299changes the ``pages_to_scan`` parameter based on demand. 300 301The advisor can be enabled, so KSM can automatically adapt to changes in the 302number of candidate pages to scan. Two advisors are implemented: none and 303scan-time. With none, no advisor is enabled. The default is none. 304 305The scan time advisor changes the ``pages_to_scan`` parameter based on the 306observed scan times. The possible values for the ``pages_to_scan`` parameter is 307limited by the ``advisor_max_cpu`` parameter. In addition there is also the 308``advisor_target_scan_time`` parameter. This parameter sets the target time to 309scan all the KSM candidate pages. The parameter ``advisor_target_scan_time`` 310decides how aggressive the scan time advisor scans candidate pages. Lower 311values make the scan time advisor to scan more aggresively. This is the most 312important parameter for the configuration of the scan time advisor. 313 314The initial value and the maximum value can be changed with 315``advisor_min_pages_to_scan`` and ``advisor_max_pages_to_scan``. The default 316values are sufficient for most workloads and use cases. 317 318The ``pages_to_scan`` parameter is re-calculated after a scan has been completed. 319 320 321-- 322Izik Eidus, 323Hugh Dickins, 17 Nov 2009 324