1.. SPDX-License-Identifier: GPL-2.0 2 3.. include:: <isonum.txt> 4 5 6The SI476x Driver 7================= 8 9Copyright |copy| 2013 Andrey Smirnov <andrew.smirnov@gmail.com> 10 11TODO for the driver 12------------------- 13 14- According to the SiLabs' datasheet it is possible to update the 15 firmware of the radio chip in the run-time, thus bringing it to the 16 most recent version. Unfortunately I couldn't find any mentioning of 17 the said firmware update for the old chips that I tested the driver 18 against, so for chips like that the driver only exposes the old 19 functionality. 20 21 22Parameters exposed over debugfs 23------------------------------- 24SI476x allow user to get multiple characteristics that can be very 25useful for EoL testing/RF performance estimation, parameters that have 26very little to do with V4L2 subsystem. Such parameters are exposed via 27debugfs and can be accessed via regular file I/O operations. 28 29The drivers exposes following files: 30 31* /sys/kernel/debug/<device-name>/acf 32 This file contains ACF(Automatically Controlled Features) status 33 information. The contents of the file is binary data of the 34 following layout: 35 36 .. tabularcolumns:: |p{7ex}|p{12ex}|L| 37 38 ============= ============== ==================================== 39 Offset Name Description 40 ============= ============== ==================================== 41 0x00 blend_int Flag, set when stereo separation has 42 crossed below the blend threshold 43 0x01 hblend_int Flag, set when HiBlend cutoff 44 frequency is lower than threshold 45 0x02 hicut_int Flag, set when HiCut cutoff 46 frequency is lower than threshold 47 0x03 chbw_int Flag, set when channel filter 48 bandwidth is less than threshold 49 0x04 softmute_int Flag indicating that softmute 50 attenuation has increased above 51 softmute threshold 52 0x05 smute 0 - Audio is not soft muted 53 1 - Audio is soft muted 54 0x06 smattn Soft mute attenuation level in dB 55 0x07 chbw Channel filter bandwidth in kHz 56 0x08 hicut HiCut cutoff frequency in units of 57 100Hz 58 0x09 hiblend HiBlend cutoff frequency in units 59 of 100 Hz 60 0x10 pilot 0 - Stereo pilot is not present 61 1 - Stereo pilot is present 62 0x11 stblend Stereo blend in % 63 ============= ============== ==================================== 64 65 66* /sys/kernel/debug/<device-name>/rds_blckcnt 67 This file contains statistics about RDS receptions. It's binary data 68 has the following layout: 69 70 .. tabularcolumns:: |p{7ex}|p{12ex}|L| 71 72 ============= ============== ==================================== 73 Offset Name Description 74 ============= ============== ==================================== 75 0x00 expected Number of expected RDS blocks 76 0x02 received Number of received RDS blocks 77 0x04 uncorrectable Number of uncorrectable RDS blocks 78 ============= ============== ==================================== 79 80* /sys/kernel/debug/<device-name>/agc 81 This file contains information about parameters pertaining to 82 AGC(Automatic Gain Control) 83 84 The layout is: 85 86 .. tabularcolumns:: |p{7ex}|p{12ex}|L| 87 88 ============= ============== ==================================== 89 Offset Name Description 90 ============= ============== ==================================== 91 0x00 mxhi 0 - FM Mixer PD high threshold is 92 not tripped 93 1 - FM Mixer PD high threshold is 94 tripped 95 0x01 mxlo ditto for FM Mixer PD low 96 0x02 lnahi ditto for FM LNA PD high 97 0x03 lnalo ditto for FM LNA PD low 98 0x04 fmagc1 FMAGC1 attenuator resistance 99 (see datasheet for more detail) 100 0x05 fmagc2 ditto for FMAGC2 101 0x06 pgagain PGA gain in dB 102 0x07 fmwblang FM/WB LNA Gain in dB 103 ============= ============== ==================================== 104 105* /sys/kernel/debug/<device-name>/rsq 106 This file contains information about parameters pertaining to 107 RSQ(Received Signal Quality) 108 109 The layout is: 110 111 .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}| 112 113 ============= ============== ==================================== 114 Offset Name Description 115 ============= ============== ==================================== 116 0x00 multhint 0 - multipath value has not crossed 117 the Multipath high threshold 118 1 - multipath value has crossed 119 the Multipath high threshold 120 0x01 multlint ditto for Multipath low threshold 121 0x02 snrhint 0 - received signal's SNR has not 122 crossed high threshold 123 1 - received signal's SNR has 124 crossed high threshold 125 0x03 snrlint ditto for low threshold 126 0x04 rssihint ditto for RSSI high threshold 127 0x05 rssilint ditto for RSSI low threshold 128 0x06 bltf Flag indicating if seek command 129 reached/wrapped seek band limit 130 0x07 snr_ready Indicates that SNR metrics is ready 131 0x08 rssiready ditto for RSSI metrics 132 0x09 injside 0 - Low-side injection is being used 133 1 - High-side injection is used 134 0x10 afcrl Flag indicating if AFC rails 135 0x11 valid Flag indicating if channel is valid 136 0x12 readfreq Current tuned frequency 137 0x14 freqoff Signed frequency offset in units of 138 2ppm 139 0x15 rssi Signed value of RSSI in dBuV 140 0x16 snr Signed RF SNR in dB 141 0x17 issi Signed Image Strength Signal 142 indicator 143 0x18 lassi Signed Low side adjacent Channel 144 Strength indicator 145 0x19 hassi ditto for High side 146 0x20 mult Multipath indicator 147 0x21 dev Frequency deviation 148 0x24 assi Adjacent channel SSI 149 0x25 usn Ultrasonic noise indicator 150 0x26 pilotdev Pilot deviation in units of 100 Hz 151 0x27 rdsdev ditto for RDS 152 0x28 assidev ditto for ASSI 153 0x29 strongdev Frequency deviation 154 0x30 rdspi RDS PI code 155 ============= ============== ==================================== 156 157* /sys/kernel/debug/<device-name>/rsq_primary 158 This file contains information about parameters pertaining to 159 RSQ(Received Signal Quality) for primary tuner only. Layout is as 160 the one above. 161