1.. _readme: 2 3Linux kernel release 6.x <http://kernel.org/> 4============================================= 5 6These are the release notes for Linux version 6. Read them carefully, 7as they tell you what this is all about, explain how to install the 8kernel, and what to do if something goes wrong. 9 10What is Linux? 11-------------- 12 13 Linux is a clone of the operating system Unix, written from scratch by 14 Linus Torvalds with assistance from a loosely-knit team of hackers across 15 the Net. It aims towards POSIX and Single UNIX Specification compliance. 16 17 It has all the features you would expect in a modern fully-fledged Unix, 18 including true multitasking, virtual memory, shared libraries, demand 19 loading, shared copy-on-write executables, proper memory management, 20 and multistack networking including IPv4 and IPv6. 21 22 It is distributed under the GNU General Public License v2 - see the 23 accompanying COPYING file for more details. 24 25On what hardware does it run? 26----------------------------- 27 28 Although originally developed first for 32-bit x86-based PCs (386 or higher), 29 today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and 30 UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, 31 IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64 Xtensa, and 32 ARC architectures. 33 34 Linux is easily portable to most general-purpose 32- or 64-bit architectures 35 as long as they have a paged memory management unit (PMMU) and a port of the 36 GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has 37 also been ported to a number of architectures without a PMMU, although 38 functionality is then obviously somewhat limited. 39 Linux has also been ported to itself. You can now run the kernel as a 40 userspace application - this is called UserMode Linux (UML). 41 42Documentation 43------------- 44 45 - There is a lot of documentation available both in electronic form on 46 the Internet and in books, both Linux-specific and pertaining to 47 general UNIX questions. I'd recommend looking into the documentation 48 subdirectories on any Linux FTP site for the LDP (Linux Documentation 49 Project) books. This README is not meant to be documentation on the 50 system: there are much better sources available. 51 52 - There are various README files in the Documentation/ subdirectory: 53 these typically contain kernel-specific installation notes for some 54 drivers for example. Please read the 55 :ref:`Documentation/process/changes.rst <changes>` file, as it 56 contains information about the problems, which may result by upgrading 57 your kernel. 58 59Installing the kernel source 60---------------------------- 61 62 - If you install the full sources, put the kernel tarball in a 63 directory where you have permissions (e.g. your home directory) and 64 unpack it:: 65 66 xz -cd linux-6.x.tar.xz | tar xvf - 67 68 Replace "X" with the version number of the latest kernel. 69 70 Do NOT use the /usr/src/linux area! This area has a (usually 71 incomplete) set of kernel headers that are used by the library header 72 files. They should match the library, and not get messed up by 73 whatever the kernel-du-jour happens to be. 74 75 - You can also upgrade between 6.x releases by patching. Patches are 76 distributed in the xz format. To install by patching, get all the 77 newer patch files, enter the top level directory of the kernel source 78 (linux-6.x) and execute:: 79 80 xz -cd ../patch-6.x.xz | patch -p1 81 82 Replace "x" for all versions bigger than the version "x" of your current 83 source tree, **in_order**, and you should be ok. You may want to remove 84 the backup files (some-file-name~ or some-file-name.orig), and make sure 85 that there are no failed patches (some-file-name# or some-file-name.rej). 86 If there are, either you or I have made a mistake. 87 88 Unlike patches for the 6.x kernels, patches for the 6.x.y kernels 89 (also known as the -stable kernels) are not incremental but instead apply 90 directly to the base 6.x kernel. For example, if your base kernel is 6.0 91 and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1 92 and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and 93 want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is, 94 patch -R) **before** applying the 6.0.3 patch. You can read more on this in 95 :ref:`Documentation/process/applying-patches.rst <applying_patches>`. 96 97 Alternatively, the script patch-kernel can be used to automate this 98 process. It determines the current kernel version and applies any 99 patches found:: 100 101 linux/scripts/patch-kernel linux 102 103 The first argument in the command above is the location of the 104 kernel source. Patches are applied from the current directory, but 105 an alternative directory can be specified as the second argument. 106 107 - Make sure you have no stale .o files and dependencies lying around:: 108 109 cd linux 110 make mrproper 111 112 You should now have the sources correctly installed. 113 114Software requirements 115--------------------- 116 117 Compiling and running the 6.x kernels requires up-to-date 118 versions of various software packages. Consult 119 :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers 120 required and how to get updates for these packages. Beware that using 121 excessively old versions of these packages can cause indirect 122 errors that are very difficult to track down, so don't assume that 123 you can just update packages when obvious problems arise during 124 build or operation. 125 126Build directory for the kernel 127------------------------------ 128 129 When compiling the kernel, all output files will per default be 130 stored together with the kernel source code. 131 Using the option ``make O=output/dir`` allows you to specify an alternate 132 place for the output files (including .config). 133 Example:: 134 135 kernel source code: /usr/src/linux-6.x 136 build directory: /home/name/build/kernel 137 138 To configure and build the kernel, use:: 139 140 cd /usr/src/linux-6.x 141 make O=/home/name/build/kernel menuconfig 142 make O=/home/name/build/kernel 143 sudo make O=/home/name/build/kernel modules_install install 144 145 Please note: If the ``O=output/dir`` option is used, then it must be 146 used for all invocations of make. 147 148Configuring the kernel 149---------------------- 150 151 Do not skip this step even if you are only upgrading one minor 152 version. New configuration options are added in each release, and 153 odd problems will turn up if the configuration files are not set up 154 as expected. If you want to carry your existing configuration to a 155 new version with minimal work, use ``make oldconfig``, which will 156 only ask you for the answers to new questions. 157 158 - Alternative configuration commands are:: 159 160 "make config" Plain text interface. 161 162 "make menuconfig" Text based color menus, radiolists & dialogs. 163 164 "make nconfig" Enhanced text based color menus. 165 166 "make xconfig" Qt based configuration tool. 167 168 "make gconfig" GTK+ based configuration tool. 169 170 "make oldconfig" Default all questions based on the contents of 171 your existing ./.config file and asking about 172 new config symbols. 173 174 "make olddefconfig" 175 Like above, but sets new symbols to their default 176 values without prompting. 177 178 "make defconfig" Create a ./.config file by using the default 179 symbol values from either arch/$ARCH/defconfig 180 or arch/$ARCH/configs/${PLATFORM}_defconfig, 181 depending on the architecture. 182 183 "make ${PLATFORM}_defconfig" 184 Create a ./.config file by using the default 185 symbol values from 186 arch/$ARCH/configs/${PLATFORM}_defconfig. 187 Use "make help" to get a list of all available 188 platforms of your architecture. 189 190 "make allyesconfig" 191 Create a ./.config file by setting symbol 192 values to 'y' as much as possible. 193 194 "make allmodconfig" 195 Create a ./.config file by setting symbol 196 values to 'm' as much as possible. 197 198 "make allnoconfig" Create a ./.config file by setting symbol 199 values to 'n' as much as possible. 200 201 "make randconfig" Create a ./.config file by setting symbol 202 values to random values. 203 204 "make localmodconfig" Create a config based on current config and 205 loaded modules (lsmod). Disables any module 206 option that is not needed for the loaded modules. 207 208 To create a localmodconfig for another machine, 209 store the lsmod of that machine into a file 210 and pass it in as a LSMOD parameter. 211 212 Also, you can preserve modules in certain folders 213 or kconfig files by specifying their paths in 214 parameter LMC_KEEP. 215 216 target$ lsmod > /tmp/mylsmod 217 target$ scp /tmp/mylsmod host:/tmp 218 219 host$ make LSMOD=/tmp/mylsmod \ 220 LMC_KEEP="drivers/usb:drivers/gpu:fs" \ 221 localmodconfig 222 223 The above also works when cross compiling. 224 225 "make localyesconfig" Similar to localmodconfig, except it will convert 226 all module options to built in (=y) options. You can 227 also preserve modules by LMC_KEEP. 228 229 "make kvm_guest.config" Enable additional options for kvm guest kernel 230 support. 231 232 "make xen.config" Enable additional options for xen dom0 guest kernel 233 support. 234 235 "make tinyconfig" Configure the tiniest possible kernel. 236 237 You can find more information on using the Linux kernel config tools 238 in Documentation/kbuild/kconfig.rst. 239 240 - NOTES on ``make config``: 241 242 - Having unnecessary drivers will make the kernel bigger, and can 243 under some circumstances lead to problems: probing for a 244 nonexistent controller card may confuse your other controllers. 245 246 - A kernel with math-emulation compiled in will still use the 247 coprocessor if one is present: the math emulation will just 248 never get used in that case. The kernel will be slightly larger, 249 but will work on different machines regardless of whether they 250 have a math coprocessor or not. 251 252 - The "kernel hacking" configuration details usually result in a 253 bigger or slower kernel (or both), and can even make the kernel 254 less stable by configuring some routines to actively try to 255 break bad code to find kernel problems (kmalloc()). Thus you 256 should probably answer 'n' to the questions for "development", 257 "experimental", or "debugging" features. 258 259Compiling the kernel 260-------------------- 261 262 - Make sure you have at least gcc 5.1 available. 263 For more information, refer to :ref:`Documentation/process/changes.rst <changes>`. 264 265 - Do a ``make`` to create a compressed kernel image. It is also possible to do 266 ``make install`` if you have lilo installed or if your distribution has an 267 install script recognised by the kernel's installer. Most popular 268 distributions will have a recognized install script. You may want to 269 check your distribution's setup first. 270 271 To do the actual install, you have to be root, but none of the normal 272 build should require that. Don't take the name of root in vain. 273 274 - If you configured any of the parts of the kernel as ``modules``, you 275 will also have to do ``make modules_install``. 276 277 - Verbose kernel compile/build output: 278 279 Normally, the kernel build system runs in a fairly quiet mode (but not 280 totally silent). However, sometimes you or other kernel developers need 281 to see compile, link, or other commands exactly as they are executed. 282 For this, use "verbose" build mode. This is done by passing 283 ``V=1`` to the ``make`` command, e.g.:: 284 285 make V=1 all 286 287 To have the build system also tell the reason for the rebuild of each 288 target, use ``V=2``. The default is ``V=0``. 289 290 - Keep a backup kernel handy in case something goes wrong. This is 291 especially true for the development releases, since each new release 292 contains new code which has not been debugged. Make sure you keep a 293 backup of the modules corresponding to that kernel, as well. If you 294 are installing a new kernel with the same version number as your 295 working kernel, make a backup of your modules directory before you 296 do a ``make modules_install``. 297 298 Alternatively, before compiling, use the kernel config option 299 "LOCALVERSION" to append a unique suffix to the regular kernel version. 300 LOCALVERSION can be set in the "General Setup" menu. 301 302 - In order to boot your new kernel, you'll need to copy the kernel 303 image (e.g. .../linux/arch/x86/boot/bzImage after compilation) 304 to the place where your regular bootable kernel is found. 305 306 - Booting a kernel directly from a storage device without the assistance 307 of a bootloader such as LILO or GRUB, is no longer supported in BIOS 308 (non-EFI systems). On UEFI/EFI systems, however, you can use EFISTUB 309 which allows the motherboard to boot directly to the kernel. 310 On modern workstations and desktops, it's generally recommended to use a 311 bootloader as difficulties can arise with multiple kernels and secure boot. 312 For more details on EFISTUB, 313 see "Documentation/admin-guide/efi-stub.rst". 314 315 - It's important to note that as of 2016 LILO (LInux LOader) is no longer in 316 active development, though as it was extremely popular, it often comes up 317 in documentation. Popular alternatives include GRUB2, rEFInd, Syslinux, 318 systemd-boot, or EFISTUB. For various reasons, it's not recommended to use 319 software that's no longer in active development. 320 321 - Chances are your distribution includes an install script and running 322 ``make install`` will be all that's needed. Should that not be the case 323 you'll have to identify your bootloader and reference its documentation or 324 configure your EFI. 325 326Legacy LILO Instructions 327------------------------ 328 329 330 - If you use LILO the kernel images are specified in the file /etc/lilo.conf. 331 The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or 332 /boot/bzImage. To use the new kernel, save a copy of the old image and copy 333 the new image over the old one. Then, you MUST RERUN LILO to update the 334 loading map! If you don't, you won't be able to boot the new kernel image. 335 336 - Reinstalling LILO is usually a matter of running /sbin/lilo. You may wish 337 to edit /etc/lilo.conf to specify an entry for your old kernel image 338 (say, /vmlinux.old) in case the new one does not work. See the LILO docs 339 for more information. 340 341 - After reinstalling LILO, you should be all set. Shutdown the system, 342 reboot, and enjoy! 343 344 - If you ever need to change the default root device, video mode, etc. in the 345 kernel image, use your bootloader's boot options where appropriate. No need 346 to recompile the kernel to change these parameters. 347 348 - Reboot with the new kernel and enjoy. 349 350 351If something goes wrong 352----------------------- 353 354If you have problems that seem to be due to kernel bugs, please follow the 355instructions at 'Documentation/admin-guide/reporting-issues.rst'. 356 357Hints on understanding kernel bug reports are in 358'Documentation/admin-guide/bug-hunting.rst'. More on debugging the kernel 359with gdb is in 'Documentation/dev-tools/gdb-kernel-debugging.rst' and 360'Documentation/dev-tools/kgdb.rst'. 361