1.. SPDX-License-Identifier: GPL-2.0-only 2 3============= 4 QAIC driver 5============= 6 7The QAIC driver is the Kernel Mode Driver (KMD) for the AIC100 family of AI 8accelerator products. 9 10Interrupts 11========== 12 13IRQ Storm Mitigation 14-------------------- 15 16While the AIC100 DMA Bridge hardware implements an IRQ storm mitigation 17mechanism, it is still possible for an IRQ storm to occur. A storm can happen 18if the workload is particularly quick, and the host is responsive. If the host 19can drain the response FIFO as quickly as the device can insert elements into 20it, then the device will frequently transition the response FIFO from empty to 21non-empty and generate MSIs at a rate equivalent to the speed of the 22workload's ability to process inputs. The lprnet (license plate reader network) 23workload is known to trigger this condition, and can generate in excess of 100k 24MSIs per second. It has been observed that most systems cannot tolerate this 25for long, and will crash due to some form of watchdog due to the overhead of 26the interrupt controller interrupting the host CPU. 27 28To mitigate this issue, the QAIC driver implements specific IRQ handling. When 29QAIC receives an IRQ, it disables that line. This prevents the interrupt 30controller from interrupting the CPU. Then AIC drains the FIFO. Once the FIFO 31is drained, QAIC implements a "last chance" polling algorithm where QAIC will 32sleep for a time to see if the workload will generate more activity. The IRQ 33line remains disabled during this time. If no activity is detected, QAIC exits 34polling mode and reenables the IRQ line. 35 36This mitigation in QAIC is very effective. The same lprnet usecase that 37generates 100k IRQs per second (per /proc/interrupts) is reduced to roughly 64 38IRQs over 5 minutes while keeping the host system stable, and having the same 39workload throughput performance (within run to run noise variation). 40 41Single MSI Mode 42--------------- 43 44MultiMSI is not well supported on all systems; virtualized ones even less so 45(circa 2023). Between hypervisors masking the PCIe MSI capability structure to 46large memory requirements for vIOMMUs (required for supporting MultiMSI), it is 47useful to be able to fall back to a single MSI when needed. 48 49To support this fallback, we allow the case where only one MSI is able to be 50allocated, and share that one MSI between MHI and the DBCs. The device detects 51when only one MSI has been configured and directs the interrupts for the DBCs 52to the interrupt normally used for MHI. Unfortunately this means that the 53interrupt handlers for every DBC and MHI wake up for every interrupt that 54arrives; however, the DBC threaded irq handlers only are started when work to be 55done is detected (MHI will always start its threaded handler). 56 57If the DBC is configured to force MSI interrupts, this can circumvent the 58software IRQ storm mitigation mentioned above. Since the MSI is shared it is 59never disabled, allowing each new entry to the FIFO to trigger a new interrupt. 60 61 62Neural Network Control (NNC) Protocol 63===================================== 64 65The implementation of NNC is split between the KMD (QAIC) and UMD. In general 66QAIC understands how to encode/decode NNC wire protocol, and elements of the 67protocol which require kernel space knowledge to process (for example, mapping 68host memory to device IOVAs). QAIC understands the structure of a message, and 69all of the transactions. QAIC does not understand commands (the payload of a 70passthrough transaction). 71 72QAIC handles and enforces the required little endianness and 64-bit alignment, 73to the degree that it can. Since QAIC does not know the contents of a 74passthrough transaction, it relies on the UMD to satisfy the requirements. 75 76The terminate transaction is of particular use to QAIC. QAIC is not aware of 77the resources that are loaded onto a device since the majority of that activity 78occurs within NNC commands. As a result, QAIC does not have the means to 79roll back userspace activity. To ensure that a userspace client's resources 80are fully released in the case of a process crash, or a bug, QAIC uses the 81terminate command to let QSM know when a user has gone away, and the resources 82can be released. 83 84QSM can report a version number of the NNC protocol it supports. This is in the 85form of a Major number and a Minor number. 86 87Major number updates indicate changes to the NNC protocol which impact the 88message format, or transactions (impacts QAIC). 89 90Minor number updates indicate changes to the NNC protocol which impact the 91commands (does not impact QAIC). 92 93uAPI 94==== 95 96QAIC creates an accel device per physical PCIe device. This accel device exists 97for as long as the PCIe device is known to Linux. 98 99The PCIe device may not be in the state to accept requests from userspace at 100all times. QAIC will trigger KOBJ_ONLINE/OFFLINE uevents to advertise when the 101device can accept requests (ONLINE) and when the device is no longer accepting 102requests (OFFLINE) because of a reset or other state transition. 103 104QAIC defines a number of driver specific IOCTLs as part of the userspace API. 105 106DRM_IOCTL_QAIC_MANAGE 107 This IOCTL allows userspace to send a NNC request to the QSM. The call will 108 block until a response is received, or the request has timed out. 109 110DRM_IOCTL_QAIC_CREATE_BO 111 This IOCTL allows userspace to allocate a buffer object (BO) which can send 112 or receive data from a workload. The call will return a GEM handle that 113 represents the allocated buffer. The BO is not usable until it has been 114 sliced (see DRM_IOCTL_QAIC_ATTACH_SLICE_BO). 115 116DRM_IOCTL_QAIC_MMAP_BO 117 This IOCTL allows userspace to prepare an allocated BO to be mmap'd into the 118 userspace process. 119 120DRM_IOCTL_QAIC_ATTACH_SLICE_BO 121 This IOCTL allows userspace to slice a BO in preparation for sending the BO 122 to the device. Slicing is the operation of describing what portions of a BO 123 get sent where to a workload. This requires a set of DMA transfers for the 124 DMA Bridge, and as such, locks the BO to a specific DBC. 125 126DRM_IOCTL_QAIC_EXECUTE_BO 127 This IOCTL allows userspace to submit a set of sliced BOs to the device. The 128 call is non-blocking. Success only indicates that the BOs have been queued 129 to the device, but does not guarantee they have been executed. 130 131DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO 132 This IOCTL operates like DRM_IOCTL_QAIC_EXECUTE_BO, but it allows userspace 133 to shrink the BOs sent to the device for this specific call. If a BO 134 typically has N inputs, but only a subset of those is available, this IOCTL 135 allows userspace to indicate that only the first M bytes of the BO should be 136 sent to the device to minimize data transfer overhead. This IOCTL dynamically 137 recomputes the slicing, and therefore has some processing overhead before the 138 BOs can be queued to the device. 139 140DRM_IOCTL_QAIC_WAIT_BO 141 This IOCTL allows userspace to determine when a particular BO has been 142 processed by the device. The call will block until either the BO has been 143 processed and can be re-queued to the device, or a timeout occurs. 144 145DRM_IOCTL_QAIC_PERF_STATS_BO 146 This IOCTL allows userspace to collect performance statistics on the most 147 recent execution of a BO. This allows userspace to construct an end to end 148 timeline of the BO processing for a performance analysis. 149 150DRM_IOCTL_QAIC_DETACH_SLICE_BO 151 This IOCTL allows userspace to remove the slicing information from a BO that 152 was originally provided by a call to DRM_IOCTL_QAIC_ATTACH_SLICE_BO. This 153 is the inverse of DRM_IOCTL_QAIC_ATTACH_SLICE_BO. The BO must be idle for 154 DRM_IOCTL_QAIC_DETACH_SLICE_BO to be called. After a successful detach slice 155 operation the BO may have new slicing information attached with a new call 156 to DRM_IOCTL_QAIC_ATTACH_SLICE_BO. After detach slice, the BO cannot be 157 executed until after a new attach slice operation. Combining attach slice 158 and detach slice calls allows userspace to use a BO with multiple workloads. 159 160Userspace Client Isolation 161========================== 162 163AIC100 supports multiple clients. Multiple DBCs can be consumed by a single 164client, and multiple clients can each consume one or more DBCs. Workloads 165may contain sensitive information therefore only the client that owns the 166workload should be allowed to interface with the DBC. 167 168Clients are identified by the instance associated with their open(). A client 169may only use memory they allocate, and DBCs that are assigned to their 170workloads. Attempts to access resources assigned to other clients will be 171rejected. 172 173Module parameters 174================= 175 176QAIC supports the following module parameters: 177 178**datapath_polling (bool)** 179 180Configures QAIC to use a polling thread for datapath events instead of relying 181on the device interrupts. Useful for platforms with broken multiMSI. Must be 182set at QAIC driver initialization. Default is 0 (off). 183 184**mhi_timeout_ms (unsigned int)** 185 186Sets the timeout value for MHI operations in milliseconds (ms). Must be set 187at the time the driver detects a device. Default is 2000 (2 seconds). 188 189**control_resp_timeout_s (unsigned int)** 190 191Sets the timeout value for QSM responses to NNC messages in seconds (s). Must 192be set at the time the driver is sending a request to QSM. Default is 60 (one 193minute). 194 195**wait_exec_default_timeout_ms (unsigned int)** 196 197Sets the default timeout for the wait_exec ioctl in milliseconds (ms). Must be 198set prior to the waic_exec ioctl call. A value specified in the ioctl call 199overrides this for that call. Default is 5000 (5 seconds). 200 201**datapath_poll_interval_us (unsigned int)** 202 203Sets the polling interval in microseconds (us) when datapath polling is active. 204Takes effect at the next polling interval. Default is 100 (100 us). 205 206**timesync_delay_ms (unsigned int)** 207 208Sets the time interval in milliseconds (ms) between two consecutive timesync 209operations. Default is 1000 (1000 ms). 210