1What: /sys/devices/system/cpu/ 2Date: pre-git history 3Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 4Description: 5 A collection of both global and individual CPU attributes 6 7 Individual CPU attributes are contained in subdirectories 8 named by the kernel's logical CPU number, e.g.: 9 10 /sys/devices/system/cpu/cpu#/ 11 12What: /sys/devices/system/cpu/kernel_max 13 /sys/devices/system/cpu/offline 14 /sys/devices/system/cpu/online 15 /sys/devices/system/cpu/possible 16 /sys/devices/system/cpu/present 17Date: December 2008 18Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 19Description: CPU topology files that describe kernel limits related to 20 hotplug. Briefly: 21 22 kernel_max: the maximum cpu index allowed by the kernel 23 configuration. 24 25 offline: cpus that are not online because they have been 26 HOTPLUGGED off or exceed the limit of cpus allowed by the 27 kernel configuration (kernel_max above). 28 29 online: cpus that are online and being scheduled. 30 31 possible: cpus that have been allocated resources and can be 32 brought online if they are present. 33 34 present: cpus that have been identified as being present in 35 the system. 36 37 See Documentation/cputopology.txt for more information. 38 39 40What: /sys/devices/system/cpu/probe 41 /sys/devices/system/cpu/release 42Date: November 2009 43Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 44Description: Dynamic addition and removal of CPU's. This is not hotplug 45 removal, this is meant complete removal/addition of the CPU 46 from the system. 47 48 probe: writes to this file will dynamically add a CPU to the 49 system. Information written to the file to add CPU's is 50 architecture specific. 51 52 release: writes to this file dynamically remove a CPU from 53 the system. Information writtento the file to remove CPU's 54 is architecture specific. 55 56What: /sys/devices/system/cpu/cpu#/node 57Date: October 2009 58Contact: Linux memory management mailing list <linux-mm@kvack.org> 59Description: Discover NUMA node a CPU belongs to 60 61 When CONFIG_NUMA is enabled, a symbolic link that points 62 to the corresponding NUMA node directory. 63 64 For example, the following symlink is created for cpu42 65 in NUMA node 2: 66 67 /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2 68 69 70What: /sys/devices/system/cpu/cpu#/topology/core_id 71 /sys/devices/system/cpu/cpu#/topology/core_siblings 72 /sys/devices/system/cpu/cpu#/topology/core_siblings_list 73 /sys/devices/system/cpu/cpu#/topology/physical_package_id 74 /sys/devices/system/cpu/cpu#/topology/thread_siblings 75 /sys/devices/system/cpu/cpu#/topology/thread_siblings_list 76Date: December 2008 77Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 78Description: CPU topology files that describe a logical CPU's relationship 79 to other cores and threads in the same physical package. 80 81 One cpu# directory is created per logical CPU in the system, 82 e.g. /sys/devices/system/cpu/cpu42/. 83 84 Briefly, the files above are: 85 86 core_id: the CPU core ID of cpu#. Typically it is the 87 hardware platform's identifier (rather than the kernel's). 88 The actual value is architecture and platform dependent. 89 90 core_siblings: internal kernel map of cpu#'s hardware threads 91 within the same physical_package_id. 92 93 core_siblings_list: human-readable list of the logical CPU 94 numbers within the same physical_package_id as cpu#. 95 96 physical_package_id: physical package id of cpu#. Typically 97 corresponds to a physical socket number, but the actual value 98 is architecture and platform dependent. 99 100 thread_siblings: internel kernel map of cpu#'s hardware 101 threads within the same core as cpu# 102 103 thread_siblings_list: human-readable list of cpu#'s hardware 104 threads within the same core as cpu# 105 106 See Documentation/cputopology.txt for more information. 107 108 109What: /sys/devices/system/cpu/cpuidle/current_driver 110 /sys/devices/system/cpu/cpuidle/current_governer_ro 111Date: September 2007 112Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 113Description: Discover cpuidle policy and mechanism 114 115 Various CPUs today support multiple idle levels that are 116 differentiated by varying exit latencies and power 117 consumption during idle. 118 119 Idle policy (governor) is differentiated from idle mechanism 120 (driver) 121 122 current_driver: displays current idle mechanism 123 124 current_governor_ro: displays current idle policy 125 126 See files in Documentation/cpuidle/ for more information. 127 128 129What: /sys/devices/system/cpu/cpu#/cpufreq/* 130Date: pre-git history 131Contact: linux-pm@vger.kernel.org 132Description: Discover and change clock speed of CPUs 133 134 Clock scaling allows you to change the clock speed of the 135 CPUs on the fly. This is a nice method to save battery 136 power, because the lower the clock speed, the less power 137 the CPU consumes. 138 139 There are many knobs to tweak in this directory. 140 141 See files in Documentation/cpu-freq/ for more information. 142 143 In particular, read Documentation/cpu-freq/user-guide.txt 144 to learn how to control the knobs. 145 146 147What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus 148Date: June 2013 149Contact: linux-pm@vger.kernel.org 150Description: Discover CPUs in the same CPU frequency coordination domain 151 152 freqdomain_cpus is the list of CPUs (online+offline) that share 153 the same clock/freq domain (possibly at the hardware level). 154 That information may be hidden from the cpufreq core and the 155 value of related_cpus may be different from freqdomain_cpus. This 156 attribute is useful for user space DVFS controllers to get better 157 power/performance results for platforms using acpi-cpufreq. 158 159 This file is only present if the acpi-cpufreq driver is in use. 160 161 162What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1} 163Date: August 2008 164KernelVersion: 2.6.27 165Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 166Description: Disable L3 cache indices 167 168 These files exist in every CPU's cache/index3 directory. Each 169 cache_disable_{0,1} file corresponds to one disable slot which 170 can be used to disable a cache index. Reading from these files 171 on a processor with this functionality will return the currently 172 disabled index for that node. There is one L3 structure per 173 node, or per internal node on MCM machines. Writing a valid 174 index to one of these files will cause the specificed cache 175 index to be disabled. 176 177 All AMD processors with L3 caches provide this functionality. 178 For details, see BKDGs at 179 http://developer.amd.com/documentation/guides/Pages/default.aspx 180 181 182What: /sys/devices/system/cpu/cpufreq/boost 183Date: August 2012 184Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 185Description: Processor frequency boosting control 186 187 This switch controls the boost setting for the whole system. 188 Boosting allows the CPU and the firmware to run at a frequency 189 beyound it's nominal limit. 190 More details can be found in Documentation/cpu-freq/boost.txt 191 192 193What: /sys/devices/system/cpu/cpu#/crash_notes 194 /sys/devices/system/cpu/cpu#/crash_notes_size 195Date: April 2013 196Contact: kexec@lists.infradead.org 197Description: address and size of the percpu note. 198 199 crash_notes: the physical address of the memory that holds the 200 note of cpu#. 201 202 crash_notes_size: size of the note of cpu#. 203 204 205What: /sys/devices/system/cpu/intel_pstate/max_perf_pct 206 /sys/devices/system/cpu/intel_pstate/min_perf_pct 207 /sys/devices/system/cpu/intel_pstate/no_turbo 208Date: February 2013 209Contact: linux-pm@vger.kernel.org 210Description: Parameters for the Intel P-state driver 211 212 Logic for selecting the current P-state in Intel 213 Sandybridge+ processors. The three knobs control 214 limits for the P-state that will be requested by the 215 driver. 216 217 max_perf_pct: limits the maximum P state that will be requested by 218 the driver stated as a percentage of the available performance. 219 220 min_perf_pct: limits the minimum P state that will be requested by 221 the driver stated as a percentage of the available performance. 222 223 no_turbo: limits the driver to selecting P states below the turbo 224 frequency range. 225 226 More details can be found in Documentation/cpu-freq/intel-pstate.txt 227 228What: /sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below> 229Date: July 2014(documented, existed before August 2008) 230Contact: Sudeep Holla <sudeep.holla@arm.com> 231 Linux kernel mailing list <linux-kernel@vger.kernel.org> 232Description: Parameters for the CPU cache attributes 233 234 allocation_policy: 235 - WriteAllocate: allocate a memory location to a cache line 236 on a cache miss because of a write 237 - ReadAllocate: allocate a memory location to a cache line 238 on a cache miss because of a read 239 - ReadWriteAllocate: both writeallocate and readallocate 240 241 attributes: LEGACY used only on IA64 and is same as write_policy 242 243 coherency_line_size: the minimum amount of data in bytes that gets 244 transferred from memory to cache 245 246 level: the cache hierarchy in the multi-level cache configuration 247 248 number_of_sets: total number of sets in the cache, a set is a 249 collection of cache lines with the same cache index 250 251 physical_line_partition: number of physical cache line per cache tag 252 253 shared_cpu_list: the list of logical cpus sharing the cache 254 255 shared_cpu_map: logical cpu mask containing the list of cpus sharing 256 the cache 257 258 size: the total cache size in kB 259 260 type: 261 - Instruction: cache that only holds instructions 262 - Data: cache that only caches data 263 - Unified: cache that holds both data and instructions 264 265 ways_of_associativity: degree of freedom in placing a particular block 266 of memory in the cache 267 268 write_policy: 269 - WriteThrough: data is written to both the cache line 270 and to the block in the lower-level memory 271 - WriteBack: data is written only to the cache line and 272 the modified cache line is written to main 273 memory only when it is replaced 274 275 276What: /sys/devices/system/cpu/cpu*/cache/index*/id 277Date: September 2016 278Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 279Description: Cache id 280 281 The id provides a unique number for a specific instance of 282 a cache of a particular type. E.g. there may be a level 283 3 unified cache on each socket in a server and we may 284 assign them ids 0, 1, 2, ... 285 286 Note that id value can be non-contiguous. E.g. level 1 287 caches typically exist per core, but there may not be a 288 power of two cores on a socket, so these caches may be 289 numbered 0, 1, 2, 3, 4, 5, 8, 9, 10, ... 290 291What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats 292 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat 293 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat 294 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle 295 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap 296 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp 297 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault 298 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent 299 /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset 300Date: March 2016 301Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 302 Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> 303Description: POWERNV CPUFreq driver's frequency throttle stats directory and 304 attributes 305 306 'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency 307 throttle stat attributes for the chip. The throttle stats of a cpu 308 is common across all the cpus belonging to a chip. Below are the 309 throttle attributes exported in the 'throttle_stats' directory: 310 311 - turbo_stat : This file gives the total number of times the max 312 frequency is throttled to lower frequency in turbo (at and above 313 nominal frequency) range of frequencies. 314 315 - sub_turbo_stat : This file gives the total number of times the 316 max frequency is throttled to lower frequency in sub-turbo(below 317 nominal frequency) range of frequencies. 318 319 - unthrottle : This file gives the total number of times the max 320 frequency is unthrottled after being throttled. 321 322 - powercap : This file gives the total number of times the max 323 frequency is throttled due to 'Power Capping'. 324 325 - overtemp : This file gives the total number of times the max 326 frequency is throttled due to 'CPU Over Temperature'. 327 328 - supply_fault : This file gives the total number of times the 329 max frequency is throttled due to 'Power Supply Failure'. 330 331 - overcurrent : This file gives the total number of times the 332 max frequency is throttled due to 'Overcurrent'. 333 334 - occ_reset : This file gives the total number of times the max 335 frequency is throttled due to 'OCC Reset'. 336 337 The sysfs attributes representing different throttle reasons like 338 powercap, overtemp, supply_fault, overcurrent and occ_reset map to 339 the reasons provided by OCC firmware for throttling the frequency. 340 341What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats 342 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat 343 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat 344 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle 345 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap 346 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp 347 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault 348 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent 349 /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset 350Date: March 2016 351Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 352 Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> 353Description: POWERNV CPUFreq driver's frequency throttle stats directory and 354 attributes 355 356 'policyX/throttle_stats' directory and all the attributes are same as 357 the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and 358 attributes which give the frequency throttle information of the chip. 359 360What: /sys/devices/system/cpu/cpuX/regs/ 361 /sys/devices/system/cpu/cpuX/regs/identification/ 362 /sys/devices/system/cpu/cpuX/regs/identification/midr_el1 363 /sys/devices/system/cpu/cpuX/regs/identification/revidr_el1 364Date: June 2016 365Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org> 366Description: AArch64 CPU registers 367 'identification' directory exposes the CPU ID registers for 368 identifying model and revision of the CPU. 369 370What: /sys/devices/system/cpu/cpu#/cpu_capacity 371Date: December 2016 372Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> 373Description: information about CPUs heterogeneity. 374 375 cpu_capacity: capacity of cpu#. 376