1What: /sys/class/leds/<led>/device_name 2Date: Dec 2017 3KernelVersion: 4.16 4Contact: linux-leds@vger.kernel.org 5Description: 6 Specifies the network device name to monitor. 7 8What: /sys/class/leds/<led>/interval 9Date: Dec 2017 10KernelVersion: 4.16 11Contact: linux-leds@vger.kernel.org 12Description: 13 Specifies the duration of the LED blink in milliseconds. 14 Defaults to 50 ms. 15 16 When offloaded is true, the interval value MUST be set to the 17 default value and cannot be changed. 18 Trying to set any value in this specific mode will return 19 an EINVAL error. 20 21What: /sys/class/leds/<led>/link 22Date: Dec 2017 23KernelVersion: 4.16 24Contact: linux-leds@vger.kernel.org 25Description: 26 Signal the link state of the named network device. 27 28 If set to 0 (default), the LED's normal state is off. 29 30 If set to 1, the LED's normal state reflects the link state 31 of the named network device. 32 Setting this value also immediately changes the LED state. 33 34 35What: /sys/class/leds/<led>/tx 36Date: Dec 2017 37KernelVersion: 4.16 38Contact: linux-leds@vger.kernel.org 39Description: 40 Signal transmission of data on the named network device. 41 42 If set to 0 (default), the LED will not blink on transmission. 43 44 If set to 1, the LED will blink for the milliseconds specified 45 in interval to signal transmission. 46 47 When offloaded is true, the blink interval is controlled by 48 hardware and won't reflect the value set in interval. 49 50What: /sys/class/leds/<led>/rx 51Date: Dec 2017 52KernelVersion: 4.16 53Contact: linux-leds@vger.kernel.org 54Description: 55 Signal reception of data on the named network device. 56 57 If set to 0 (default), the LED will not blink on reception. 58 59 If set to 1, the LED will blink for the milliseconds specified 60 in interval to signal reception. 61 62 When offloaded is true, the blink interval is controlled by 63 hardware and won't reflect the value set in interval. 64 65What: /sys/class/leds/<led>/offloaded 66Date: Jun 2023 67KernelVersion: 6.5 68Contact: linux-leds@vger.kernel.org 69Description: 70 Communicate whether the LED trigger modes are offloaded to 71 hardware or whether software fallback is used. 72 73 If 0, the LED is using software fallback to blink. 74 75 If 1, the LED blinking in requested mode is offloaded to 76 hardware. 77 78What: /sys/class/leds/<led>/link_10 79Date: Jun 2023 80KernelVersion: 6.5 81Contact: linux-leds@vger.kernel.org 82Description: 83 Signal the link speed state of 10Mbps of the named network device. 84 85 If set to 0 (default), the LED's normal state is off. 86 87 If set to 1, the LED's normal state reflects the link state 88 speed of 10MBps of the named network device. 89 Setting this value also immediately changes the LED state. 90 91 Present only if the named network device supports 10Mbps link speed. 92 93What: /sys/class/leds/<led>/link_100 94Date: Jun 2023 95KernelVersion: 6.5 96Contact: linux-leds@vger.kernel.org 97Description: 98 Signal the link speed state of 100Mbps of the named network device. 99 100 If set to 0 (default), the LED's normal state is off. 101 102 If set to 1, the LED's normal state reflects the link state 103 speed of 100Mbps of the named network device. 104 Setting this value also immediately changes the LED state. 105 106 Present only if the named network device supports 100Mbps link speed. 107 108What: /sys/class/leds/<led>/link_1000 109Date: Jun 2023 110KernelVersion: 6.5 111Contact: linux-leds@vger.kernel.org 112Description: 113 Signal the link speed state of 1000Mbps of the named network device. 114 115 If set to 0 (default), the LED's normal state is off. 116 117 If set to 1, the LED's normal state reflects the link state 118 speed of 1000Mbps of the named network device. 119 Setting this value also immediately changes the LED state. 120 121 Present only if the named network device supports 1000Mbps link speed. 122 123What: /sys/class/leds/<led>/link_2500 124Date: Nov 2023 125KernelVersion: 6.8 126Contact: linux-leds@vger.kernel.org 127Description: 128 Signal the link speed state of 2500Mbps of the named network device. 129 130 If set to 0 (default), the LED's normal state is off. 131 132 If set to 1, the LED's normal state reflects the link state 133 speed of 2500Mbps of the named network device. 134 Setting this value also immediately changes the LED state. 135 136 Present only if the named network device supports 2500Mbps link speed. 137 138What: /sys/class/leds/<led>/link_5000 139Date: Nov 2023 140KernelVersion: 6.8 141Contact: linux-leds@vger.kernel.org 142Description: 143 Signal the link speed state of 5000Mbps of the named network device. 144 145 If set to 0 (default), the LED's normal state is off. 146 147 If set to 1, the LED's normal state reflects the link state 148 speed of 5000Mbps of the named network device. 149 Setting this value also immediately changes the LED state. 150 151 Present only if the named network device supports 5000Mbps link speed. 152 153What: /sys/class/leds/<led>/link_10000 154Date: Nov 2023 155KernelVersion: 6.8 156Contact: linux-leds@vger.kernel.org 157Description: 158 Signal the link speed state of 10000Mbps of the named network device. 159 160 If set to 0 (default), the LED's normal state is off. 161 162 If set to 1, the LED's normal state reflects the link state 163 speed of 10000Mbps of the named network device. 164 Setting this value also immediately changes the LED state. 165 166 Present only if the named network device supports 10000Mbps link speed. 167 168What: /sys/class/leds/<led>/half_duplex 169Date: Jun 2023 170KernelVersion: 6.5 171Contact: linux-leds@vger.kernel.org 172Description: 173 Signal the link half duplex state of the named network device. 174 175 If set to 0 (default), the LED's normal state is off. 176 177 If set to 1, the LED's normal state reflects the link half 178 duplex state of the named network device. 179 Setting this value also immediately changes the LED state. 180 181What: /sys/class/leds/<led>/full_duplex 182Date: Jun 2023 183KernelVersion: 6.5 184Contact: linux-leds@vger.kernel.org 185Description: 186 Signal the link full duplex state of the named network device. 187 188 If set to 0 (default), the LED's normal state is off. 189 190 If set to 1, the LED's normal state reflects the link full 191 duplex state of the named network device. 192 Setting this value also immediately changes the LED state. 193