1What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl 2Date: Jun 2018 3KernelVersion: 4.17 4Contact: thunderbolt-software@lists.01.org 5Description: Holds a comma separated list of device unique_ids that 6 are allowed to be connected automatically during system 7 startup (e.g boot devices). The list always contains 8 maximum supported number of unique_ids where unused 9 entries are empty. This allows the userspace software 10 to determine how many entries the controller supports. 11 If there are multiple controllers, each controller has 12 its own ACL list and size may be different between the 13 controllers. 14 15 System BIOS may have an option "Preboot ACL" or similar 16 that needs to be selected before this list is taken into 17 consideration. 18 19 Software always updates a full list in each write. 20 21 If a device is authorized automatically during boot its 22 boot attribute is set to 1. 23 24What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization 25Date: May 2021 26KernelVersion: 5.12 27Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 28Description: This attribute tells whether the system supports 29 de-authorization of devices. Value of 1 means user can 30 de-authorize PCIe tunnel by writing 0 to authorized 31 attribute under each device. 32 33What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection 34Date: Mar 2019 35KernelVersion: 4.21 36Contact: thunderbolt-software@lists.01.org 37Description: This attribute tells whether the system uses IOMMU 38 for DMA protection. Value of 1 means IOMMU is used 0 means 39 it is not (DMA protection is solely based on Thunderbolt 40 security levels). 41 42What: /sys/bus/thunderbolt/devices/.../domainX/security 43Date: Sep 2017 44KernelVersion: 4.13 45Contact: thunderbolt-software@lists.01.org 46Description: This attribute holds current Thunderbolt security level 47 set by the system BIOS. Possible values are: 48 49 ======= ================================================== 50 none All devices are automatically authorized 51 user Devices are only authorized based on writing 52 appropriate value to the authorized attribute 53 secure Require devices that support secure connect at 54 minimum. User needs to authorize each device. 55 dponly Automatically tunnel Display port (and USB). No 56 PCIe tunnels are created. 57 usbonly Automatically tunnel USB controller of the 58 connected Thunderbolt dock (and Display Port). All 59 PCIe links downstream of the dock are removed. 60 nopcie USB4 system where PCIe tunneling is disabled from 61 the BIOS. 62 ======= ================================================== 63 64What: /sys/bus/thunderbolt/devices/.../authorized 65Date: Sep 2017 66KernelVersion: 4.13 67Contact: thunderbolt-software@lists.01.org 68Description: This attribute is used to authorize Thunderbolt devices 69 after they have been connected. If the device is not 70 authorized, no PCIe devices are available to the system. 71 72 Contents of this attribute will be 0 when the device is not 73 yet authorized. 74 75 Possible values are supported: 76 77 == =================================================== 78 0 The device will be de-authorized (only supported if 79 deauthorization attribute under domain contains 1) 80 1 The device will be authorized and connected 81 == =================================================== 82 83 When key attribute contains 32 byte hex string the possible 84 values are: 85 86 == ======================================================== 87 0 The device will be de-authorized (only supported if 88 deauthorization attribute under domain contains 1) 89 1 The 32 byte hex string is added to the device NVM and 90 the device is authorized. 91 2 Send a challenge based on the 32 byte hex string. If the 92 challenge response from device is valid, the device is 93 authorized. In case of failure errno will be ENOKEY if 94 the device did not contain a key at all, and 95 EKEYREJECTED if the challenge response did not match. 96 == ======================================================== 97 98What: /sys/bus/thunderbolt/devices/.../boot 99Date: Jun 2018 100KernelVersion: 4.17 101Contact: thunderbolt-software@lists.01.org 102Description: This attribute contains 1 if Thunderbolt device was already 103 authorized on boot and 0 otherwise. 104 105What: /sys/bus/thunderbolt/devices/.../generation 106Date: Jan 2020 107KernelVersion: 5.5 108Contact: Christian Kellner <christian@kellner.me> 109Description: This attribute contains the generation of the Thunderbolt 110 controller associated with the device. It will contain 4 111 for USB4. 112 113What: /sys/bus/thunderbolt/devices/.../key 114Date: Sep 2017 115KernelVersion: 4.13 116Contact: thunderbolt-software@lists.01.org 117Description: When a devices supports Thunderbolt secure connect it will 118 have this attribute. Writing 32 byte hex string changes 119 authorization to use the secure connection method instead. 120 Writing an empty string clears the key and regular connection 121 method can be used again. 122 123What: /sys/bus/thunderbolt/devices/.../device 124Date: Sep 2017 125KernelVersion: 4.13 126Contact: thunderbolt-software@lists.01.org 127Description: This attribute contains id of this device extracted from 128 the device DROM. 129 130What: /sys/bus/thunderbolt/devices/.../device_name 131Date: Sep 2017 132KernelVersion: 4.13 133Contact: thunderbolt-software@lists.01.org 134Description: This attribute contains name of this device extracted from 135 the device DROM. 136 137What: /sys/bus/thunderbolt/devices/.../maxhopid 138Date: Jul 2021 139KernelVersion: 5.13 140Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 141Description: Only set for XDomains. The maximum HopID the other host 142 supports as its input HopID. 143 144What: /sys/bus/thunderbolt/devices/.../rx_speed 145Date: Jan 2020 146KernelVersion: 5.5 147Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 148Description: This attribute reports the device RX speed per lane. 149 All RX lanes run at the same speed. 150 151What: /sys/bus/thunderbolt/devices/.../rx_lanes 152Date: Jan 2020 153KernelVersion: 5.5 154Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 155Description: This attribute reports number of RX lanes the device is 156 using simultaneusly through its upstream port. 157 158What: /sys/bus/thunderbolt/devices/.../tx_speed 159Date: Jan 2020 160KernelVersion: 5.5 161Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 162Description: This attribute reports the TX speed per lane. 163 All TX lanes run at the same speed. 164 165What: /sys/bus/thunderbolt/devices/.../tx_lanes 166Date: Jan 2020 167KernelVersion: 5.5 168Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 169Description: This attribute reports number of TX lanes the device is 170 using simultaneusly through its upstream port. 171 172What: /sys/bus/thunderbolt/devices/.../vendor 173Date: Sep 2017 174KernelVersion: 4.13 175Contact: thunderbolt-software@lists.01.org 176Description: This attribute contains vendor id of this device extracted 177 from the device DROM. 178 179What: /sys/bus/thunderbolt/devices/.../vendor_name 180Date: Sep 2017 181KernelVersion: 4.13 182Contact: thunderbolt-software@lists.01.org 183Description: This attribute contains vendor name of this device extracted 184 from the device DROM. 185 186What: /sys/bus/thunderbolt/devices/.../unique_id 187Date: Sep 2017 188KernelVersion: 4.13 189Contact: thunderbolt-software@lists.01.org 190Description: This attribute contains unique_id string of this device. 191 This is either read from hardware registers (UUID on 192 newer hardware) or based on UID from the device DROM. 193 Can be used to uniquely identify particular device. 194 195What: /sys/bus/thunderbolt/devices/.../nvm_version 196Date: Sep 2017 197KernelVersion: 4.13 198Contact: thunderbolt-software@lists.01.org 199Description: If the device has upgradeable firmware the version 200 number is available here. Format: %x.%x, major.minor. 201 If the device is in safe mode reading the file returns 202 -ENODATA instead as the NVM version is not available. 203 204What: /sys/bus/thunderbolt/devices/.../nvm_authenticate 205Date: Sep 2017 206KernelVersion: 4.13 207Contact: thunderbolt-software@lists.01.org 208Description: When new NVM image is written to the non-active NVM 209 area (through non_activeX NVMem device), the 210 authentication procedure is started by writing to 211 this file. 212 If everything goes well, the device is 213 restarted with the new NVM firmware. If the image 214 verification fails an error code is returned instead. 215 216 This file will accept writing values "1", "2" or "3". 217 218 - Writing "1" will flush the image to the storage 219 area and authenticate the image in one action. 220 - Writing "2" will run some basic validation on the image 221 and flush it to the storage area. 222 - Writing "3" will authenticate the image that is 223 currently written in the storage area. This is only 224 supported with USB4 devices and retimers. 225 226 When read holds status of the last authentication 227 operation if an error occurred during the process. This 228 is directly the status value from the DMA configuration 229 based mailbox before the device is power cycled. Writing 230 0 here clears the status. 231 232What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect 233Date: Oct 2020 234KernelVersion: v5.9 235Contact: Mario Limonciello <mario.limonciello@outlook.com> 236Description: For supported devices, automatically authenticate the new Thunderbolt 237 image when the device is disconnected from the host system. 238 239 This file will accept writing values "1" or "2" 240 241 - Writing "1" will flush the image to the storage 242 area and prepare the device for authentication on disconnect. 243 - Writing "2" will run some basic validation on the image 244 and flush it to the storage area. 245 246What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key 247Date: Jan 2018 248KernelVersion: 4.15 249Contact: thunderbolt-software@lists.01.org 250Description: This contains name of the property directory the XDomain 251 service exposes. This entry describes the protocol in 252 question. Following directories are already reserved by 253 the Apple XDomain specification: 254 255 ======== =============================================== 256 network IP/ethernet over Thunderbolt 257 targetdm Target disk mode protocol over Thunderbolt 258 extdisp External display mode protocol over Thunderbolt 259 ======== =============================================== 260 261What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias 262Date: Jan 2018 263KernelVersion: 4.15 264Contact: thunderbolt-software@lists.01.org 265Description: Stores the same MODALIAS value emitted by uevent for 266 the XDomain service. Format: tbtsvc:kSpNvNrN 267 268What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid 269Date: Jan 2018 270KernelVersion: 4.15 271Contact: thunderbolt-software@lists.01.org 272Description: This contains XDomain protocol identifier the XDomain 273 service supports. 274 275What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers 276Date: Jan 2018 277KernelVersion: 4.15 278Contact: thunderbolt-software@lists.01.org 279Description: This contains XDomain protocol version the XDomain 280 service supports. 281 282What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs 283Date: Jan 2018 284KernelVersion: 4.15 285Contact: thunderbolt-software@lists.01.org 286Description: This contains XDomain software version the XDomain 287 service supports. 288 289What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns 290Date: Jan 2018 291KernelVersion: 4.15 292Contact: thunderbolt-software@lists.01.org 293Description: This contains XDomain service specific settings as 294 bitmask. Format: %x 295 296What: /sys/bus/thunderbolt/devices/usb4_portX/link 297Date: Sep 2021 298KernelVersion: v5.14 299Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 300Description: Returns the current link mode. Possible values are 301 "usb4", "tbt" and "none". 302 303What: /sys/bus/thunderbolt/devices/usb4_portX/offline 304Date: Sep 2021 305KernelVersion: v5.14 306Contact: Rajmohan Mani <rajmohan.mani@intel.com> 307Description: Writing 1 to this attribute puts the USB4 port into 308 offline mode. Only allowed when there is nothing 309 connected to the port (link attribute returns "none"). 310 Once the port is in offline mode it does not receive any 311 hotplug events. This is used to update NVM firmware of 312 on-board retimers. Writing 0 puts the port back to 313 online mode. 314 315 This attribute is only visible if the platform supports 316 powering on retimers when there is no cable connected. 317 318What: /sys/bus/thunderbolt/devices/usb4_portX/rescan 319Date: Sep 2021 320KernelVersion: v5.14 321Contact: Rajmohan Mani <rajmohan.mani@intel.com> 322Description: When the USB4 port is in offline mode writing 1 to this 323 attribute forces rescan of the sideband for on-board 324 retimers. Each retimer appear under the USB4 port as if 325 the USB4 link was up. These retimers act in the same way 326 as if the cable was connected so upgrading their NVM 327 firmware can be done the usual way. 328 329What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/device 330Date: Oct 2020 331KernelVersion: v5.9 332Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 333Description: Retimer device identifier read from the hardware. 334 335What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate 336Date: Oct 2020 337KernelVersion: v5.9 338Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 339Description: When new NVM image is written to the non-active NVM 340 area (through non_activeX NVMem device), the 341 authentication procedure is started by writing 1 to 342 this file. If everything goes well, the device is 343 restarted with the new NVM firmware. If the image 344 verification fails an error code is returned instead. 345 346 When read holds status of the last authentication 347 operation if an error occurred during the process. 348 Format: %x. 349 350What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version 351Date: Oct 2020 352KernelVersion: v5.9 353Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 354Description: Holds retimer NVM version number. Format: %x.%x, major.minor. 355 356What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor 357Date: Oct 2020 358KernelVersion: v5.9 359Contact: Mika Westerberg <mika.westerberg@linux.intel.com> 360Description: Retimer vendor identifier read from the hardware. 361