1What: /sys/bus/iio/devices/iio:deviceX 2KernelVersion: 2.6.35 3Contact: linux-iio@vger.kernel.org 4Description: 5 Hardware chip or device accessed by one communication port. 6 Corresponds to a grouping of sensor channels. X is the IIO 7 index of the device. 8 9What: /sys/bus/iio/devices/triggerX 10KernelVersion: 2.6.35 11Contact: linux-iio@vger.kernel.org 12Description: 13 An event driven driver of data capture to an in kernel buffer. 14 May be provided by a device driver that also has an IIO device 15 based on hardware generated events (e.g. data ready) or 16 provided by a separate driver for other hardware (e.g. 17 periodic timer, GPIO or high resolution timer). 18 19 Contains trigger type specific elements. These do not 20 generalize well and hence are not documented in this file. 21 X is the IIO index of the trigger. 22 23What: /sys/bus/iio/devices/iio:deviceX/buffer 24KernelVersion: 2.6.35 25Contact: linux-iio@vger.kernel.org 26Description: 27 Directory of attributes relating to the buffer for the device. 28 29What: /sys/bus/iio/devices/iio:deviceX/name 30KernelVersion: 2.6.35 31Contact: linux-iio@vger.kernel.org 32Description: 33 Description of the physical chip / device for device X. 34 Typically a part number. 35 36What: /sys/bus/iio/devices/iio:deviceX/label 37KernelVersion: 5.8 38Contact: linux-iio@vger.kernel.org 39Description: 40 Optional symbolic label for a device. 41 This is useful for userspace to be able to better identify an 42 individual device. 43 44 The contents of the label are free-form, but there are some 45 standardized uses: 46 47 For proximity sensors which give the proximity (of a person) to 48 a certain wlan or wwan antenna the following standardized labels 49 are used: 50 51 * "proximity-wifi" 52 * "proximity-lte" 53 * "proximity-wifi-lte" 54 * "proximity-wifi-left" 55 * "proximity-wifi-right" 56 57 These are used to indicate to userspace that these proximity 58 sensors may be used to tune transmit power to ensure that 59 Specific Absorption Rate (SAR) limits are honored. 60 The "-left" and "-right" labels are for devices with multiple 61 antennas. 62 63 In some laptops/tablets the standardized proximity sensor labels 64 instead indicate proximity to a specific part of the device: 65 66 * "proximity-palmrest" indicates proximity to the keyboard's palmrest 67 * "proximity-palmrest-left" indicates proximity to the left part of the palmrest 68 * "proximity-palmrest-right" indicates proximity to the right part of the palmrest 69 * "proximity-lap" indicates the device is being used on someone's lap 70 71 Note "proximity-lap" is special in that its value may be 72 calculated by firmware from other sensor readings, rather then 73 being a raw sensor reading. 74 75 For accelerometers used in 2-in-1s with 360° (yoga-style) hinges, 76 which have an accelerometer in both their base and their display, 77 the following standardized labels are used: 78 79 * "accel-base" 80 * "accel-display" 81 82 For devices where an accelerometer is housed in the swivel camera subassembly 83 (for AR application), the following standardized label is used: 84 85 * "accel-camera" 86 87What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock 88KernelVersion: 4.5 89Contact: linux-iio@vger.kernel.org 90Description: 91 String identifying current posix clock used to timestamp 92 buffered samples and events for device X. 93 94What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency 95What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency 96What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency 97What: /sys/bus/iio/devices/iio:deviceX/events/sampling_frequency 98What: /sys/bus/iio/devices/triggerX/sampling_frequency 99KernelVersion: 2.6.35 100Contact: linux-iio@vger.kernel.org 101Description: 102 Some devices have internal clocks. This parameter sets the 103 resulting sampling frequency. In many devices this 104 parameter has an effect on input filters etc. rather than 105 simply controlling when the input is sampled. As this 106 affects data ready triggers, hardware buffers and the sysfs 107 direct access interfaces, it may be found in any of the 108 relevant directories. If it affects all of the above 109 then it is to be found in the base device directory. 110 111 The stm32-timer-trigger has the additional characteristic that 112 a sampling_frequency of 0 is defined to stop sampling. 113 114What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available 115What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available 116What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available 117What: /sys/.../iio:deviceX/buffer/sampling_frequency_available 118What: /sys/bus/iio/devices/triggerX/sampling_frequency_available 119KernelVersion: 2.6.35 120Contact: linux-iio@vger.kernel.org 121Description: 122 When the internal sampling clock can only take a specific set of 123 frequencies, we can specify the available values with: 124 125 - a small discrete set of values like "0 2 4 6 8" 126 - a range with minimum, step and maximum frequencies like 127 "[min step max]" 128 129What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio 130KernelVersion: 2.6.38 131Contact: linux-iio@vger.kernel.org 132Description: 133 Hardware dependent ADC oversampling. Controls the sampling ratio 134 of the digital filter if available. 135 136What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available 137KernelVersion: 2.6.38 138Contact: linux-iio@vger.kernel.org 139Description: 140 Hardware dependent values supported by the oversampling filter. 141 142What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw 143What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw 144KernelVersion: 2.6.35 145Contact: linux-iio@vger.kernel.org 146Description: 147 Raw (unscaled no bias removal etc.) voltage measurement from 148 channel Y. In special cases where the channel does not 149 correspond to externally available input one of the named 150 versions may be used. The number must always be specified and 151 unique to allow association with event codes. Units after 152 application of scale and offset are millivolts. 153 154 Channels with 'i' and 'q' modifiers always exist in pairs and both 155 channels refer to the same signal. The 'i' channel contains the in-phase 156 component of the signal while the 'q' channel contains the quadrature 157 component. 158 159What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw 160KernelVersion: 2.6.35 161Contact: linux-iio@vger.kernel.org 162Description: 163 Raw (unscaled) differential voltage measurement equivalent to 164 channel Y - channel Z where these channel numbers apply to the 165 physically equivalent inputs when non differential readings are 166 separately available. In differential only parts, then all that 167 is required is a consistent labeling. Units after application 168 of scale and offset are millivolts. 169 170What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_rms_raw 171KernelVersion: 6.18 172Contact: linux-iio@vger.kernel.org 173Description: 174 Raw (unscaled) Root Mean Square (RMS) voltage measurement from 175 channel Y. Units after application of scale and offset are 176 millivolts. 177 178What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw 179What: /sys/bus/iio/devices/iio:deviceX/in_powerY_active_raw 180What: /sys/bus/iio/devices/iio:deviceX/in_powerY_reactive_raw 181What: /sys/bus/iio/devices/iio:deviceX/in_powerY_apparent_raw 182KernelVersion: 4.5 183Contact: linux-iio@vger.kernel.org 184Description: 185 Raw (unscaled no bias removal etc.) power measurement from 186 channel Y. The number must always be specified and 187 unique to allow association with event codes. Units after 188 application of scale and offset are milliwatts. 189 190What: /sys/bus/iio/devices/iio:deviceX/in_powerY_powerfactor 191KernelVersion: 6.18 192Contact: linux-iio@vger.kernel.org 193Description: 194 Power factor measurement from channel Y. Power factor is the 195 ratio of active power to apparent power. The value is unitless. 196 197What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw 198KernelVersion: 3.2 199Contact: linux-iio@vger.kernel.org 200Description: 201 Raw capacitance measurement from channel Y. Units after 202 application of scale and offset are nanofarads. 203 204What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw 205KernelVersion: 3.2 206Contact: linux-iio@vger.kernel.org 207Description: 208 Raw differential capacitance measurement equivalent to 209 channel Y - channel Z where these channel numbers apply to the 210 physically equivalent inputs when non differential readings are 211 separately available. In differential only parts, then all that 212 is required is a consistent labeling. Units after application 213 of scale and offset are nanofarads. 214 215What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint 216KernelVersion: 6.1 217Contact: linux-iio@vger.kernel.org 218Description: 219 For differential channels, this an offset that is applied 220 equally to both inputs. As the reading is of the difference 221 between the two inputs, this should not be applied to the _raw 222 reading by userspace (unlike _offset) and unlike calibbias 223 it does not affect the differential value measured because 224 the effect of _zeropoint cancels out across the two inputs 225 that make up the differential pair. It's purpose is to bring 226 the individual signals, before the differential is measured, 227 within the measurement range of the device. The naming is 228 chosen because if the separate inputs that make the 229 differential pair are drawn on a graph in their 230 _raw units, this is the value that the zero point on the 231 measurement axis represents. It is expressed with the 232 same scaling as _raw. 233 234What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw 235What: /sys/bus/iio/devices/iio:deviceX/in_tempY_raw 236What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw 237What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw 238What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw 239What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw 240KernelVersion: 2.6.35 241Contact: linux-iio@vger.kernel.org 242Description: 243 Raw (unscaled no bias removal etc.) temperature measurement. 244 If an axis is specified it generally means that the temperature 245 sensor is associated with one part of a compound device (e.g. 246 a gyroscope axis). The ambient and object modifiers distinguish 247 between ambient (reference) and distant temperature for contact- 248 less measurements. Units after application of scale and offset 249 are milli degrees Celsius. 250 251What: /sys/bus/iio/devices/iio:deviceX/in_tempY_input 252What: /sys/bus/iio/devices/iio:deviceX/in_temp_input 253KernelVersion: 2.6.38 254Contact: linux-iio@vger.kernel.org 255Description: 256 Scaled temperature measurement in milli degrees Celsius. 257 258What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw 259What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw 260What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw 261KernelVersion: 2.6.35 262Contact: linux-iio@vger.kernel.org 263Description: 264 Acceleration in direction x, y or z (may be arbitrarily assigned 265 but should match other such assignments on device). 266 Has all of the equivalent parameters as per voltageY. Units 267 after application of scale and offset are m/s^2. 268 269What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw 270What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw 271What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw 272KernelVersion: 6.1 273Contact: linux-iio@vger.kernel.org 274Description: 275 As per in_accel_X_raw attributes, but minus the 276 acceleration due to gravity. 277 278What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw 279What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw 280What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw 281KernelVersion: 4.11 282Contact: linux-iio@vger.kernel.org 283Description: 284 Gravity in direction x, y or z (may be arbitrarily assigned 285 but should match other such assignments on device). 286 Units after application of scale and offset are m/s^2. 287 288What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw 289What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw 290What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw 291KernelVersion: 6.5 292Contact: linux-iio@vger.kernel.org 293Description: 294 Angular displacement between two consecutive samples on x, y or 295 z (may be arbitrarily assigned but should match other such 296 assignments on device). 297 In order to compute the total angular displacement during a 298 desired period of time, the application should sum-up the delta 299 angle samples acquired during that time. 300 Units after application of scale and offset are radians. 301 302What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw 303What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw 304What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw 305KernelVersion: 6.5 306Contact: linux-iio@vger.kernel.org 307Description: 308 The linear velocity change between two consecutive samples on x, 309 y or z (may be arbitrarily assigned but should match other such 310 assignments on device). 311 In order to compute the total linear velocity change during a 312 desired period of time, the application should sum-up the delta 313 velocity samples acquired during that time. 314 Units after application of scale and offset are meters per 315 second. 316 317What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw 318What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw 319KernelVersion: 4.17 320Contact: linux-iio@vger.kernel.org 321Description: 322 Angle of rotation. Units after application of scale and offset 323 are radians. 324 325What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw 326What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw 327KernelVersion: 4.19 328Contact: linux-iio@vger.kernel.org 329Description: 330 Relative position in direction x or y on a pad (may be 331 arbitrarily assigned but should match other such assignments on 332 device). 333 Units after application of scale and offset are milli percents 334 from the pad's size in both directions. Should be calibrated by 335 the consumer. 336 337What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw 338What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw 339What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw 340KernelVersion: 2.6.35 341Contact: linux-iio@vger.kernel.org 342Description: 343 Angular velocity about axis x, y or z (may be arbitrarily 344 assigned). Has all the equivalent parameters as per voltageY. 345 Units after application of scale and offset are radians per 346 second. 347 348What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw 349What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw 350What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw 351KernelVersion: 2.6.35 352Contact: linux-iio@vger.kernel.org 353Description: 354 Inclination raw reading about axis x, y or z (may be 355 arbitrarily assigned). Data converted by application of offset 356 and scale to degrees. 357 358What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw 359What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw 360What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw 361KernelVersion: 2.6.35 362Contact: linux-iio@vger.kernel.org 363Description: 364 Magnetic field along axis x, y or z (may be arbitrarily 365 assigned). Data converted by application of offset 366 then scale to Gauss. 367 368What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw 369What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw 370What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw 371What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw 372What: /sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw 373KernelVersion: 2.6.36 374Contact: linux-iio@vger.kernel.org 375Description: 376 Highest value since some reset condition. These 377 attributes allow access to this and are otherwise 378 the direct equivalent of the <type>Y[_name]_raw attributes. 379 380What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw 381What: /sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw 382KernelVersion: 6.7 383Contact: linux-iio@vger.kernel.org 384Description: 385 Lowest value since some reset condition. These 386 attributes allow access to this and are otherwise 387 the direct equivalent of the <type>Y[_name]_raw attributes. 388 389What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw 390KernelVersion: 2.6.36 391Contact: linux-iio@vger.kernel.org 392Description: 393 A computed peak value based on the sum squared magnitude of 394 the underlying value in the specified directions. 395 396What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw 397What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw 398KernelVersion: 3.8 399Contact: linux-iio@vger.kernel.org 400Description: 401 Raw pressure measurement from channel Y. Units after 402 application of scale and offset are kilopascal. 403 404What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input 405What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input 406KernelVersion: 3.8 407Contact: linux-iio@vger.kernel.org 408Description: 409 Scaled pressure measurement from channel Y, in kilopascal. 410 411What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw 412KernelVersion: 3.14 413Contact: linux-iio@vger.kernel.org 414Description: 415 Raw humidity measurement of air. Units after application of 416 scale and offset are milli percent. 417 418What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input 419KernelVersion: 3.14 420Contact: linux-iio@vger.kernel.org 421Description: 422 Scaled humidity measurement in milli percent. 423 424What: /sys/bus/iio/devices/iio:deviceX/in_Y_mean_raw 425KernelVersion: 3.5 426Contact: linux-iio@vger.kernel.org 427Description: 428 Averaged raw measurement from channel Y. The number of values 429 used for averaging is device specific. The converting rules for 430 normal raw values also applies to the averaged raw values. 431 432What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset 433What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset 434What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset 435What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset 436What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_q_offset 437What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_i_offset 438What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset 439What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset 440What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset 441What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset 442What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset 443What: /sys/bus/iio/devices/iio:deviceX/in_current_offset 444What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset 445What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset 446What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset 447What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset 448What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset 449What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset 450What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset 451What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset 452What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_offset 453KernelVersion: 2.6.35 454Contact: linux-iio@vger.kernel.org 455Description: 456 If known for a device, offset to be added to <type>[Y]_raw prior 457 to scaling by <type>[Y]_scale in order to obtain value in the 458 <type> units as specified in <type>[Y]_raw documentation. 459 Not present if the offset is always 0 or unknown. If Y or 460 axis <x|y|z> is not present, then the offset applies to all 461 in channels of <type>. 462 May be writable if a variable offset can be applied on the 463 device. Note that this is different to calibbias which 464 is for devices (or drivers) that apply offsets to compensate 465 for variation between different instances of the part, typically 466 adjusted by using some hardware supported calibration procedure. 467 Calibbias is applied internally, offset is applied in userspace 468 to the _raw output. 469 470What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale 471What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale 472What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale 473What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale 474What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale 475What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale 476What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale 477What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale 478What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale 479What: /sys/bus/iio/devices/iio:deviceX/in_current_scale 480What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale 481What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale 482What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale 483What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale 484What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale 485What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale 486What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale 487What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale 488What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale 489What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale 490What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale 491What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale 492What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale 493What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale 494What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale 495What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale 496What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale 497What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale 498What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale 499What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale 500What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale 501What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale 502What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale 503What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale 504What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale 505What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale 506What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_scale 507What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_scale 508What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_scale 509What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale 510KernelVersion: 2.6.35 511Contact: linux-iio@vger.kernel.org 512Description: 513 If known for a device, scale to be applied to <type>Y[_name]_raw 514 post addition of <type>[Y][_name]_offset in order to obtain the 515 measured value in <type> units as specified in 516 <type>[Y][_name]_raw documentation. If shared across all in 517 channels then Y and <x|y|z> are not present and the value is 518 called <type>[Y][_name]_scale. The peak modifier means this 519 value is applied to <type>Y[_name]_peak_raw values. 520 521What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias 522What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias 523What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias 524What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_calibbias 525What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_calibbias 526What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias 527What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias 528What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias 529What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibbias 530What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibbias 531What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias 532What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibbias 533What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibbias 534What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibbias 535What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibbias 536What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias 537What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias 538What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias 539What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias 540What: /sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias 541What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias 542What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias 543What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias 544What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias 545KernelVersion: 2.6.35 546Contact: linux-iio@vger.kernel.org 547Description: 548 Hardware applied calibration offset (assumed to fix production 549 inaccuracies). 550 icm42600: For this device values are real physical offsets 551 expressed in SI units (m/s^2 for accelerometers and rad/s 552 for gyroscope)/ 553 554What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available 555What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available 556What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available 557What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available 558What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias_available 559What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available 560KernelVersion: 5.8 561Contact: linux-iio@vger.kernel.org 562Description: 563 Available values of calibbias. Maybe expressed as either of: 564 565 - a small discrete set of values like "0 2 4 6 8" 566 - a range specified as "[min step max]" 567 568What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay 569KernelVersion: 6.17 570Contact: linux-iio@vger.kernel.org 571Description: 572 Delay of start of conversion from common reference point shared 573 by all channels. Can be writable when used to compensate for 574 delay variation introduced by external filters feeding a 575 simultaneous sampling ADC. 576 577 E.g., for the ad7606 ADC series, this value is intended as a 578 configurable time delay in seconds, to correct delay introduced 579 by an optional external filtering circuit. 580 581What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available 582KernelVersion: 6.16 583Contact: linux-iio@vger.kernel.org 584Description: 585 Available values of convdelay. Maybe expressed as: 586 587 - a range specified as "[min step max]" 588 589 If shared across all channels, <type>_convdelay_available 590 is used. 591 592What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale 593What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale 594What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale 595What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale 596What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale 597What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale 598What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale 599What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibscale 600What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale 601What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale 602What: /sys/bus/iio/devices/iio:deviceX/in_intensity_both_calibscale 603What: /sys/bus/iio/devices/iio:deviceX/in_intensity_calibscale 604What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_calibscale 605What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibscale 606What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibscale 607What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibscale 608What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale 609What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale 610What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale 611What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale 612What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale 613What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale 614What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale 615What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale 616KernelVersion: 2.6.35 617Contact: linux-iio@vger.kernel.org 618Description: 619 Hardware applied calibration scale factor (assumed to fix 620 production inaccuracies). If shared across all channels, 621 <type>_calibscale is used. 622 623What: /sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available 624What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available 625What: /sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available 626What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale_available 627KernelVersion: 4.8 628Contact: linux-iio@vger.kernel.org 629Description: 630 Available values of calibscale. Maybe expressed as either of: 631 632 - a small discrete set of values like "1 8 16" 633 - a range specified as "[min step max]" 634 635 If shared across all channels, <type>_calibscale_available is used. 636 637What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender 638What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender 639What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender 640What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender 641KernelVersion: 4.0 642Contact: linux-iio@vger.kernel.org 643Description: 644 Gender of the user (e.g.: male, female) used by some pedometers 645 to compute the stride length, distance, speed and activity 646 type. 647 648What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available 649What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available 650What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available 651What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available 652KernelVersion: 4.0 653Contact: linux-iio@vger.kernel.org 654Description: 655 Lists all available gender values (e.g.: male, female). 656 657What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight 658What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight 659What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight 660What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight 661KernelVersion: 3.19 662Contact: linux-iio@vger.kernel.org 663Description: 664 Height of the user (in meters) used by some pedometers 665 to compute the stride length, distance, speed and activity 666 type. 667 668What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight 669KernelVersion: 4.0 670Contact: linux-iio@vger.kernel.org 671Description: 672 Weight of the user (in kg). It is needed by some pedometers 673 to compute the calories burnt by the user. 674 675What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available 676What: /sys/.../iio:deviceX/in_anglvel_scale_available 677What: /sys/.../iio:deviceX/in_magn_scale_available 678What: /sys/.../iio:deviceX/in_illuminance_scale_available 679What: /sys/.../iio:deviceX/in_intensity_scale_available 680What: /sys/.../iio:deviceX/in_proximity_scale_available 681What: /sys/.../iio:deviceX/in_voltageY_scale_available 682What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available 683What: /sys/.../iio:deviceX/out_voltageY_scale_available 684What: /sys/.../iio:deviceX/out_altvoltageY_scale_available 685What: /sys/.../iio:deviceX/in_capacitance_scale_available 686What: /sys/.../iio:deviceX/in_pressure_scale_available 687What: /sys/.../iio:deviceX/in_pressureY_scale_available 688KernelVersion: 2.6.35 689Contact: linux-iio@vger.kernel.org 690Description: 691 If a discrete set of scale values is available, they 692 are listed in this attribute. Unlike illumination, 693 multiplying intensity by intensity_scale does not 694 yield value with any standardized unit. 695 696What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain 697What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain 698What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain 699What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain 700What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain 701What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain 702What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hardwaregain 703KernelVersion: 2.6.35 704Contact: linux-iio@vger.kernel.org 705Description: 706 Hardware applied gain factor. If shared across all channels, 707 <type>_hardwaregain is used. 708 709What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available 710KernelVersion: 5.10 711Contact: linux-iio@vger.kernel.org 712Description: 713 Lists all available hardware applied gain factors. Shared across all 714 channels. 715 716What: /sys/.../in_accel_filter_low_pass_3db_frequency 717What: /sys/.../in_magn_filter_low_pass_3db_frequency 718What: /sys/.../in_anglvel_filter_low_pass_3db_frequency 719KernelVersion: 3.2 720Contact: linux-iio@vger.kernel.org 721Description: 722 If a known or controllable low pass filter is applied 723 to the underlying data channel, then this parameter 724 gives the 3dB frequency of the filter in Hz. 725 726What: /sys/.../in_accel_filter_high_pass_3db_frequency 727What: /sys/.../in_anglvel_filter_high_pass_3db_frequency 728What: /sys/.../in_magn_filter_high_pass_3db_frequency 729KernelVersion: 4.2 730Contact: linux-iio@vger.kernel.org 731Description: 732 If a known or controllable high pass filter is applied 733 to the underlying data channel, then this parameter 734 gives the 3dB frequency of the filter in Hz. 735 736What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw 737What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw 738KernelVersion: 2.6.37 739Contact: linux-iio@vger.kernel.org 740Description: 741 Raw (unscaled, no bias etc.) output voltage for 742 channel Y. The number must always be specified and 743 unique if the output corresponds to a single channel. 744 While DAC like devices typically use out_voltage, 745 a continuous frequency generating device, such as 746 a DDS or PLL should use out_altvoltage. 747 748What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw 749What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw 750KernelVersion: 2.6.37 751Contact: linux-iio@vger.kernel.org 752Description: 753 Raw (unscaled, no bias etc.) output voltage for an aggregate of 754 channel Y, channel Z, etc. This interface is available in cases 755 where a single output sets the value for multiple channels 756 simultaneously. 757 758What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode 759What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode 760What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode 761What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode 762KernelVersion: 2.6.38 763Contact: linux-iio@vger.kernel.org 764Description: 765 Specifies the output powerdown mode. 766 DAC output stage is disconnected from the amplifier and 767 500ohm_to_gnd: connected to ground via a 500Ohm resistor, 768 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 769 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 770 3.85kohm_to_gnd: connected to ground via a 3.85kOhm resistor, 771 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 772 7.7kohm_to_gnd: connected to ground via a 7.7kOhm resistor, 773 10kohm_to_gnd: connected to ground via a 10kOhm resistor, 774 16kohm_to_gnd: connected to ground via a 16kOhm resistor, 775 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 776 32kohm_to_gnd: connected to ground via a 32kOhm resistor, 777 42kohm_to_gnd: connected to ground via a 42kOhm resistor, 778 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 779 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 780 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 781 500kohm_to_gnd: connected to ground via a 500kOhm resistor, 782 640kohm_to_gnd: connected to ground via a 640kOhm resistor, 783 three_state: left floating. 784 For a list of available output power down options read 785 outX_powerdown_mode_available. If Y is not present the 786 mode is shared across all outputs. 787 788What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available 789What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available 790What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available 791What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available 792KernelVersion: 2.6.38 793Contact: linux-iio@vger.kernel.org 794Description: 795 Lists all available output power down modes. 796 If Y is not present the mode is shared across all outputs. 797 798What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown 799What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown 800What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown 801What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown 802KernelVersion: 2.6.38 803Contact: linux-iio@vger.kernel.org 804Description: 805 Writing 1 causes output Y to enter the power down mode specified 806 by the corresponding outY_powerdown_mode. DAC output stage is 807 disconnected from the amplifier. Clearing returns to normal 808 operation. Y may be suppressed if all outputs are controlled 809 together. 810 811What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency 812KernelVersion: 3.4.0 813Contact: linux-iio@vger.kernel.org 814Description: 815 Output frequency for channel Y in Hz. The number must always be 816 specified and unique if the output corresponds to a single 817 channel. 818 Some drivers have additional constraints: 819 ADF4371 has an integrated VCO with fundamendal output 820 frequency ranging from 4000000000 Hz 8000000000 Hz. 821 822 out_altvoltage0_frequency: 823 A divide by 1, 2, 4, 8, 16, 32 or circuit generates 824 frequencies from 62500000 Hz to 8000000000 Hz. 825 out_altvoltage1_frequency: 826 This channel duplicates the channel 0 frequency 827 out_altvoltage2_frequency: 828 A frequency doubler generates frequencies from 829 8000000000 Hz to 16000000000 Hz. 830 out_altvoltage3_frequency: 831 A frequency quadrupler generates frequencies from 832 16000000000 Hz to 32000000000 Hz. 833 834 Note: writes to one of the channels will affect the frequency of 835 all the other channels, since it involves changing the VCO 836 fundamental output frequency. 837 838What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_phase 839What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_phase 840What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase 841What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_i_phase 842What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_q_phase 843KernelVersion: 3.4.0 844Contact: linux-iio@vger.kernel.org 845Description: 846 Phase in radians of one frequency/clock output Y 847 (out_altvoltageY) relative to another frequency/clock output 848 (out_altvoltageZ) of the device X. The number must always be 849 specified and unique if the output corresponds to a single 850 channel. 851 852What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw 853Date: May 2012 854KernelVersion: 3.5 855Contact: Johan Hovold <jhovold@gmail.com> 856Description: 857 Set/get output current for channel Y. Units after application 858 of scale and offset are milliamps. 859 For some devices current channels are used to specify 860 current supplied to elements used in taking a measurement 861 of a different type. E.g. LED currents. 862 863What: /sys/bus/iio/devices/iio:deviceX/events 864KernelVersion: 2.6.35 865Contact: linux-iio@vger.kernel.org 866Description: 867 Configuration of which hardware generated events are passed up 868 to user-space. 869 870What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en 871What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en 872What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en 873What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en 874What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en 875What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en 876What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en 877What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en 878What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en 879What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en 880What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en 881What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en 882What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en 883What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en 884What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en 885What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en 886What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en 887What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en 888What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en 889What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en 890What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en 891What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en 892What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en 893What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en 894What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en 895What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en 896What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en 897What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en 898What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en 899What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en 900What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en 901What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en 902What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en 903What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en 904What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en 905What: /sys/.../iio:deviceX/events/in_pressure_thresh_rising_en 906KernelVersion: 2.6.37 907Contact: linux-iio@vger.kernel.org 908Description: 909 Event generated when channel passes a threshold in the specified 910 (_rising|_falling) direction. If the direction is not specified, 911 then either the device will report an event which ever direction 912 a single threshold value is passed in (e.g. 913 <type>[Y][_name]_<raw|input>_thresh_value) or 914 <type>[Y][_name]_<raw|input>_thresh_rising_value and 915 <type>[Y][_name]_<raw|input>_thresh_falling_value may take 916 different values, but the device can only enable both thresholds 917 or neither. 918 919 Note the driver will assume the last p events requested are 920 to be enabled where p is how many it supports (which may vary 921 depending on the exact set requested). So if you want to be 922 sure you have set what you think you have, check the contents of 923 these attributes after everything is configured. Drivers may 924 have to buffer any parameters so that they are consistent when 925 a given event type is enabled at a future point (and not those for 926 whatever event was previously enabled). 927 928What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en 929What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en 930What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en 931What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en 932What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en 933What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en 934What: /sys/.../iio:deviceX/events/in_accel_x&y&z_roc_rising_en 935What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en 936What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en 937What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en 938What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en 939What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en 940What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en 941What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en 942What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en 943What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en 944What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en 945What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en 946What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en 947What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en 948What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en 949What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en 950What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en 951What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en 952What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en 953What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en 954What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en 955What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en 956What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en 957What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en 958What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en 959What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en 960What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en 961KernelVersion: 2.6.37 962Contact: linux-iio@vger.kernel.org 963Description: 964 Event generated when channel passes a threshold on the rate of 965 change (1st differential) in the specified (_rising|_falling) 966 direction. If the direction is not specified, then either the 967 device will report an event which ever direction a single 968 threshold value is passed in (e.g. 969 <type>[Y][_name]_<raw|input>_roc_value) or 970 <type>[Y][_name]_<raw|input>_roc_rising_value and 971 <type>[Y][_name]_<raw|input>_roc_falling_value may take 972 different values, but the device can only enable both rate of 973 change thresholds or neither. 974 975 Note the driver will assume the last p events requested are 976 to be enabled where p is however many it supports (which may 977 vary depending on the exact set requested). So if you want to be 978 sure you have set what you think you have, check the contents of 979 these attributes after everything is configured. Drivers may 980 have to buffer any parameters so that they are consistent when 981 a given event type is enabled a future point (and not those for 982 whatever event was previously enabled). 983 984What: /sys/.../events/in_capacitanceY_adaptive_thresh_rising_en 985What: /sys/.../events/in_capacitanceY_adaptive_thresh_falling_en 986KernelVersion: 5.13 987Contact: linux-iio@vger.kernel.org 988Description: 989 Adaptive thresholds are similar to normal fixed thresholds 990 but the value is expressed as an offset from a value which 991 provides a low frequency approximation of the channel itself. 992 Thus these detect if a rapid change occurs in the specified 993 direction which crosses tracking value + offset. 994 Tracking value calculation is devices specific. 995 996What: /sys/.../in_capacitanceY_adaptive_thresh_rising_timeout 997What: /sys/.../in_capacitanceY_adaptive_thresh_falling_timeout 998KernelVersion: 5.11 999Contact: linux-iio@vger.kernel.org 1000Description: 1001 When adaptive thresholds are used, the tracking signal 1002 may adjust too slowly to step changes in the raw signal. 1003 Thus these specify the time in seconds for which the 1004 difference between the slow tracking signal and the raw 1005 signal is allowed to remain out-of-range before a reset 1006 event occurs in which the tracking signal is made equal 1007 to the raw signal, allowing slow tracking to resume and the 1008 adaptive threshold event detection to function as expected. 1009 1010What: /sys/.../events/in_accel_mag_adaptive_rising_value 1011What: /sys/.../events/in_accel_thresh_rising_value 1012What: /sys/.../events/in_accel_thresh_falling_value 1013What: /sys/.../events/in_accel_x_raw_thresh_rising_value 1014What: /sys/.../events/in_accel_x_raw_thresh_falling_value 1015What: /sys/.../events/in_accel_y_raw_thresh_rising_value 1016What: /sys/.../events/in_accel_y_raw_thresh_falling_value 1017What: /sys/.../events/in_accel_z_raw_thresh_rising_value 1018What: /sys/.../events/in_accel_z_raw_thresh_falling_value 1019What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value 1020What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value 1021What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value 1022What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value 1023What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value 1024What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value 1025What: /sys/.../events/in_magn_x_raw_thresh_rising_value 1026What: /sys/.../events/in_magn_x_raw_thresh_falling_value 1027What: /sys/.../events/in_magn_y_raw_thresh_rising_value 1028What: /sys/.../events/in_magn_y_raw_thresh_falling_value 1029What: /sys/.../events/in_magn_z_raw_thresh_rising_value 1030What: /sys/.../events/in_magn_z_raw_thresh_falling_value 1031What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value 1032What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value 1033What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value 1034What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value 1035What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value 1036What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value 1037What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value 1038What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value 1039What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value 1040What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value 1041What: /sys/.../events/in_voltageY_raw_thresh_rising_value 1042What: /sys/.../events/in_voltageY_raw_thresh_falling_value 1043What: /sys/.../events/in_tempY_raw_thresh_rising_value 1044What: /sys/.../events/in_tempY_raw_thresh_falling_value 1045What: /sys/.../events/in_illuminance0_thresh_falling_value 1046What: /sys/.../events/in_illuminance0_thresh_rising_value 1047What: /sys/.../events/in_proximity0_thresh_falling_value 1048What: /sys/.../events/in_proximity0_thresh_rising_value 1049What: /sys/.../events/in_illuminance_thresh_rising_value 1050What: /sys/.../events/in_illuminance_thresh_falling_value 1051What: /sys/.../events/in_capacitanceY_thresh_rising_value 1052What: /sys/.../events/in_capacitanceY_thresh_falling_value 1053What: /sys/.../events/in_capacitanceY_thresh_adaptive_rising_value 1054What: /sys/.../events/in_capacitanceY_thresh_falling_rising_value 1055What: /sys/.../events/in_pressure_thresh_rising_value 1056KernelVersion: 2.6.37 1057Contact: linux-iio@vger.kernel.org 1058Description: 1059 Specifies the value of threshold that the device is comparing 1060 against for the events enabled by 1061 <type>Y[_name]_thresh[_rising|falling]_en. 1062 1063 If separate attributes exist for the two directions, but 1064 direction is not specified for this attribute, then a single 1065 threshold value applies to both directions. 1066 1067 The raw or input element of the name indicates whether the 1068 value is in raw device units or in processed units (as _raw 1069 and _input do on sysfs direct channel read attributes). 1070 1071What: /sys/.../events/in_accel_scale 1072What: /sys/.../events/in_accel_peak_scale 1073What: /sys/.../events/in_anglvel_scale 1074What: /sys/.../events/in_magn_scale 1075What: /sys/.../events/in_rot_from_north_magnetic_scale 1076What: /sys/.../events/in_rot_from_north_true_scale 1077What: /sys/.../events/in_voltage_scale 1078What: /sys/.../events/in_voltage_supply_scale 1079What: /sys/.../events/in_temp_scale 1080What: /sys/.../events/in_illuminance_scale 1081What: /sys/.../events/in_proximity_scale 1082KernelVersion: 3.21 1083Contact: linux-iio@vger.kernel.org 1084Description: 1085 Specifies the conversion factor from the standard units 1086 to device specific units used to set the event trigger 1087 threshold. 1088 1089What: /sys/.../events/in_accel_x_thresh_rising_hysteresis 1090What: /sys/.../events/in_accel_x_thresh_falling_hysteresis 1091What: /sys/.../events/in_accel_x_thresh_either_hysteresis 1092What: /sys/.../events/in_accel_y_thresh_rising_hysteresis 1093What: /sys/.../events/in_accel_y_thresh_falling_hysteresis 1094What: /sys/.../events/in_accel_y_thresh_either_hysteresis 1095What: /sys/.../events/in_accel_z_thresh_rising_hysteresis 1096What: /sys/.../events/in_accel_z_thresh_falling_hysteresis 1097What: /sys/.../events/in_accel_z_thresh_either_hysteresis 1098What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis 1099What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis 1100What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis 1101What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis 1102What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis 1103What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis 1104What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis 1105What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis 1106What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis 1107What: /sys/.../events/in_magn_x_thresh_rising_hysteresis 1108What: /sys/.../events/in_magn_x_thresh_falling_hysteresis 1109What: /sys/.../events/in_magn_x_thresh_either_hysteresis 1110What: /sys/.../events/in_magn_y_thresh_rising_hysteresis 1111What: /sys/.../events/in_magn_y_thresh_falling_hysteresis 1112What: /sys/.../events/in_magn_y_thresh_either_hysteresis 1113What: /sys/.../events/in_magn_z_thresh_rising_hysteresis 1114What: /sys/.../events/in_magn_z_thresh_falling_hysteresis 1115What: /sys/.../events/in_magn_z_thresh_either_hysteresis 1116What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis 1117What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis 1118What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis 1119What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis 1120What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis 1121What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis 1122What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis 1123What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis 1124What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis 1125What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis 1126What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis 1127What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis 1128What: /sys/.../events/in_voltageY_thresh_rising_hysteresis 1129What: /sys/.../events/in_voltageY_thresh_falling_hysteresis 1130What: /sys/.../events/in_voltageY_thresh_either_hysteresis 1131What: /sys/.../events/in_tempY_thresh_rising_hysteresis 1132What: /sys/.../events/in_tempY_thresh_falling_hysteresis 1133What: /sys/.../events/in_tempY_thresh_either_hysteresis 1134What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis 1135What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis 1136What: /sys/.../events/in_illuminance0_thresh_either_hysteresis 1137What: /sys/.../events/in_proximity0_thresh_falling_hysteresis 1138What: /sys/.../events/in_proximity0_thresh_rising_hysteresis 1139What: /sys/.../events/in_proximity0_thresh_either_hysteresis 1140KernelVersion: 3.13 1141Contact: linux-iio@vger.kernel.org 1142Description: 1143 Specifies the hysteresis of threshold that the device is comparing 1144 against for the events enabled by 1145 <type>Y[_name]_thresh[_(rising|falling)]_hysteresis. 1146 If separate attributes exist for the two directions, but 1147 direction is not specified for this attribute, then a single 1148 hysteresis value applies to both directions. 1149 1150 For falling events the hysteresis is added to the _value attribute for 1151 this event to get the upper threshold for when the event goes back to 1152 normal, for rising events the hysteresis is subtracted from the _value 1153 attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 1154 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event 1155 will get activated once in_voltage0_raw goes above 1200 and will become 1156 deactivated again once the value falls below 1150. 1157 1158What: /sys/.../events/in_accel_roc_rising_value 1159What: /sys/.../events/in_accel_x_raw_roc_rising_value 1160What: /sys/.../events/in_accel_x_raw_roc_falling_value 1161What: /sys/.../events/in_accel_y_raw_roc_rising_value 1162What: /sys/.../events/in_accel_y_raw_roc_falling_value 1163What: /sys/.../events/in_accel_z_raw_roc_rising_value 1164What: /sys/.../events/in_accel_z_raw_roc_falling_value 1165What: /sys/.../events/in_anglvel_x_raw_roc_rising_value 1166What: /sys/.../events/in_anglvel_x_raw_roc_falling_value 1167What: /sys/.../events/in_anglvel_y_raw_roc_rising_value 1168What: /sys/.../events/in_anglvel_y_raw_roc_falling_value 1169What: /sys/.../events/in_anglvel_z_raw_roc_rising_value 1170What: /sys/.../events/in_anglvel_z_raw_roc_falling_value 1171What: /sys/.../events/in_magn_x_raw_roc_rising_value 1172What: /sys/.../events/in_magn_x_raw_roc_falling_value 1173What: /sys/.../events/in_magn_y_raw_roc_rising_value 1174What: /sys/.../events/in_magn_y_raw_roc_falling_value 1175What: /sys/.../events/in_magn_z_raw_roc_rising_value 1176What: /sys/.../events/in_magn_z_raw_roc_falling_value 1177What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value 1178What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value 1179What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value 1180What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value 1181What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value 1182What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value 1183What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value 1184What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value 1185What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value 1186What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value 1187What: /sys/.../events/in_voltageY_raw_roc_rising_value 1188What: /sys/.../events/in_voltageY_raw_roc_falling_value 1189What: /sys/.../events/in_tempY_raw_roc_rising_value 1190What: /sys/.../events/in_tempY_raw_roc_falling_value 1191KernelVersion: 2.6.37 1192Contact: linux-iio@vger.kernel.org 1193Description: 1194 Specifies the value of rate of change threshold that the 1195 device is comparing against for the events enabled by 1196 <type>[Y][_name]_roc[_rising|falling]_en. 1197 1198 If separate attributes exist for the two directions, 1199 but direction is not specified for this attribute, 1200 then a single threshold value applies to both directions. 1201 The raw or input element of the name indicates whether the 1202 value is in raw device units or in processed units (as _raw 1203 and _input do on sysfs direct channel read attributes). 1204 1205What: /sys/.../events/in_accel_mag_adaptive_rising_period 1206What: /sys/.../events/in_accel_roc_rising_period 1207What: /sys/.../events/in_accel_x_thresh_rising_period 1208What: /sys/.../events/in_accel_x_thresh_falling_period 1209What: /sys/.../events/in_accel_x_roc_rising_period 1210What: /sys/.../events/in_accel_x_roc_falling_period 1211What: /sys/.../events/in_accel_y_thresh_rising_period 1212What: /sys/.../events/in_accel_y_thresh_falling_period 1213What: /sys/.../events/in_accel_y_roc_rising_period 1214What: /sys/.../events/in_accel_y_roc_falling_period 1215What: /sys/.../events/in_accel_z_thresh_rising_period 1216What: /sys/.../events/in_accel_z_thresh_falling_period 1217What: /sys/.../events/in_accel_z_roc_rising_period 1218What: /sys/.../events/in_accel_z_roc_falling_period 1219What: /sys/.../events/in_anglvel_x_thresh_rising_period 1220What: /sys/.../events/in_anglvel_x_thresh_falling_period 1221What: /sys/.../events/in_anglvel_x_roc_rising_period 1222What: /sys/.../events/in_anglvel_x_roc_falling_period 1223What: /sys/.../events/in_anglvel_y_thresh_rising_period 1224What: /sys/.../events/in_anglvel_y_thresh_falling_period 1225What: /sys/.../events/in_anglvel_y_roc_rising_period 1226What: /sys/.../events/in_anglvel_y_roc_falling_period 1227What: /sys/.../events/in_anglvel_z_thresh_rising_period 1228What: /sys/.../events/in_anglvel_z_thresh_falling_period 1229What: /sys/.../events/in_anglvel_z_roc_rising_period 1230What: /sys/.../events/in_anglvel_z_roc_falling_period 1231What: /sys/.../events/in_magn_x_thresh_rising_period 1232What: /sys/.../events/in_magn_x_thresh_falling_period 1233What: /sys/.../events/in_magn_x_roc_rising_period 1234What: /sys/.../events/in_magn_x_roc_falling_period 1235What: /sys/.../events/in_magn_y_thresh_rising_period 1236What: /sys/.../events/in_magn_y_thresh_falling_period 1237What: /sys/.../events/in_magn_y_roc_rising_period 1238What: /sys/.../events/in_magn_y_roc_falling_period 1239What: /sys/.../events/in_magn_z_thresh_rising_period 1240What: /sys/.../events/in_magn_z_thresh_falling_period 1241What: /sys/.../events/in_magn_z_roc_rising_period 1242What: /sys/.../events/in_magn_z_roc_falling_period 1243What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period 1244What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period 1245What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period 1246What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period 1247What: /sys/.../events/in_rot_from_north_true_thresh_rising_period 1248What: /sys/.../events/in_rot_from_north_true_thresh_falling_period 1249What: /sys/.../events/in_rot_from_north_true_roc_rising_period 1250What: /sys/.../events/in_rot_from_north_true_roc_falling_period 1251What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period 1252What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period 1253What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period 1254What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period 1255What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period 1256What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period 1257What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period 1258What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period 1259What: /sys/.../events/in_voltageY_supply_thresh_rising_period 1260What: /sys/.../events/in_voltageY_supply_thresh_falling_period 1261What: /sys/.../events/in_voltageY_supply_roc_rising_period 1262What: /sys/.../events/in_voltageY_supply_roc_falling_period 1263What: /sys/.../events/in_voltageY_thresh_rising_period 1264What: /sys/.../events/in_voltageY_thresh_falling_period 1265What: /sys/.../events/in_voltageY_roc_rising_period 1266What: /sys/.../events/in_voltageY_roc_falling_period 1267What: /sys/.../events/in_tempY_thresh_rising_period 1268What: /sys/.../events/in_tempY_thresh_falling_period 1269What: /sys/.../events/in_tempY_roc_rising_period 1270What: /sys/.../events/in_tempY_roc_falling_period 1271What: /sys/.../events/in_accel_x&y&z_mag_falling_period 1272What: /sys/.../events/in_intensity0_thresh_period 1273What: /sys/.../events/in_proximity0_thresh_period 1274What: /sys/.../events/in_activity_still_thresh_rising_period 1275What: /sys/.../events/in_activity_still_thresh_falling_period 1276What: /sys/.../events/in_activity_walking_thresh_rising_period 1277What: /sys/.../events/in_activity_walking_thresh_falling_period 1278What: /sys/.../events/in_activity_jogging_thresh_rising_period 1279What: /sys/.../events/in_activity_jogging_thresh_falling_period 1280What: /sys/.../events/in_activity_running_thresh_rising_period 1281What: /sys/.../events/in_activity_running_thresh_falling_period 1282What: /sys/.../events/in_illuminance_thresh_either_period 1283KernelVersion: 2.6.37 1284Contact: linux-iio@vger.kernel.org 1285Description: 1286 Period of time (in seconds) for which the condition must be 1287 met before an event is generated. If direction is not 1288 specified then this period applies to both directions. 1289 1290What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db 1291What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db 1292What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db 1293KernelVersion: 4.2 1294Contact: linux-iio@vger.kernel.org 1295Description: 1296 If a low pass filter can be applied to the event generation 1297 this property gives its 3db frequency in Hz. 1298 A value of zero disables the filter. 1299 1300What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db 1301What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db 1302What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db 1303KernelVersion: 4.2 1304Contact: linux-iio@vger.kernel.org 1305Description: 1306 If a high pass filter can be applied to the event generation 1307 this property gives its 3db frequency in Hz. 1308 A value of zero disables the filter. 1309 1310What: /sys/.../events/in_activity_still_thresh_rising_en 1311What: /sys/.../events/in_activity_still_thresh_falling_en 1312What: /sys/.../events/in_activity_walking_thresh_rising_en 1313What: /sys/.../events/in_activity_walking_thresh_falling_en 1314What: /sys/.../events/in_activity_jogging_thresh_rising_en 1315What: /sys/.../events/in_activity_jogging_thresh_falling_en 1316What: /sys/.../events/in_activity_running_thresh_rising_en 1317What: /sys/.../events/in_activity_running_thresh_falling_en 1318KernelVersion: 3.19 1319Contact: linux-iio@vger.kernel.org 1320Description: 1321 Enables or disables activity events. Depending on direction 1322 an event is generated when sensor ENTERS or LEAVES a given state. 1323 1324What: /sys/.../events/in_activity_still_thresh_rising_value 1325What: /sys/.../events/in_activity_still_thresh_falling_value 1326What: /sys/.../events/in_activity_walking_thresh_rising_value 1327What: /sys/.../events/in_activity_walking_thresh_falling_value 1328What: /sys/.../events/in_activity_jogging_thresh_rising_value 1329What: /sys/.../events/in_activity_jogging_thresh_falling_value 1330What: /sys/.../events/in_activity_running_thresh_rising_value 1331What: /sys/.../events/in_activity_running_thresh_falling_value 1332KernelVersion: 3.19 1333Contact: linux-iio@vger.kernel.org 1334Description: 1335 Confidence value (in units as percentage) to be used 1336 for deciding when an event should be generated. E.g for 1337 running: If the confidence value reported by the sensor 1338 is greater than in_activity_running_thresh_rising_value 1339 then the sensor ENTERS running state. Conversely, if the 1340 confidence value reported by the sensor is lower than 1341 in_activity_running_thresh_falling_value then the sensor 1342 is LEAVING running state. 1343 1344What: /sys/.../iio:deviceX/events/in_accel_mag_en 1345What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en 1346What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en 1347What: /sys/.../iio:deviceX/events/in_accel_x_mag_en 1348What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en 1349What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en 1350What: /sys/.../iio:deviceX/events/in_accel_y_mag_en 1351What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en 1352What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en 1353What: /sys/.../iio:deviceX/events/in_accel_z_mag_en 1354What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en 1355What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en 1356What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en 1357What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en 1358KernelVersion: 2.6.37 1359Contact: linux-iio@vger.kernel.org 1360Description: 1361 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1362 magnitude of the channel is compared to the threshold, not its 1363 signed value. 1364 1365What: /sys/.../events/in_accel_raw_mag_value 1366What: /sys/.../events/in_accel_x_raw_mag_rising_value 1367What: /sys/.../events/in_accel_y_raw_mag_rising_value 1368What: /sys/.../events/in_accel_z_raw_mag_rising_value 1369KernelVersion: 2.6.37 1370Contact: linux-iio@vger.kernel.org 1371Description: 1372 The value to which the magnitude of the channel is compared. If 1373 number or direction is not specified, applies to all channels of 1374 this type. 1375 1376What: /sys/.../iio:deviceX/events/in_accel_x_mag_adaptive_rising_en 1377What: /sys/.../iio:deviceX/events/in_accel_y_mag_adaptive_rising_en 1378What: /sys/.../iio:deviceX/events/in_accel_z_mag_adaptive_rising_en 1379KernelVersion: 2.6.37 1380Contact: linux-iio@vger.kernel.org 1381Description: 1382 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1383 magnitude of the channel is compared to the adaptive threshold. 1384 1385What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en 1386What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en 1387What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en 1388What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en 1389What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en 1390What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en 1391KernelVersion: 5.18 1392Contact: linux-iio@vger.kernel.org 1393Description: 1394 Similar to in_accel_mag[_y][_rising|_falling]_en, but the event 1395 value is relative to a reference magnitude. The reference magnitude 1396 includes the graviational acceleration. 1397 1398What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_value 1399What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value 1400What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value 1401What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value 1402What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value 1403What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value 1404KernelVersion: 5.18 1405Contact: linux-iio@vger.kernel.org 1406Description: 1407 The value to which the reference magnitude of the channel is 1408 compared. If the axis is not specified, it applies to all channels 1409 of this type. 1410 1411What: /sys/.../events/in_steps_change_en 1412KernelVersion: 4.0 1413Contact: linux-iio@vger.kernel.org 1414Description: 1415 Event generated when channel passes a threshold on the absolute 1416 change in value. E.g. for steps: a step change event is 1417 generated each time the user takes N steps, where N is set using 1418 in_steps_change_value. 1419 1420What: /sys/.../events/in_steps_change_value 1421KernelVersion: 4.0 1422Contact: linux-iio@vger.kernel.org 1423Description: 1424 Specifies the value of change threshold that the 1425 device is comparing against for the events enabled by 1426 <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps: 1427 if set to 3, a step change event will be generated every 3 1428 steps. 1429 1430What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger 1431KernelVersion: 2.6.35 1432Contact: linux-iio@vger.kernel.org 1433Description: 1434 The name of the trigger source being used, as per string given 1435 in /sys/bus/iio/devices/triggerY/name. 1436 1437What: /sys/bus/iio/devices/iio:deviceX/bufferY/length 1438KernelVersion: 5.11 1439Contact: linux-iio@vger.kernel.org 1440Description: 1441 Number of scans contained by the buffer. 1442 1443What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable 1444KernelVersion: 5.11 1445Contact: linux-iio@vger.kernel.org 1446Description: 1447 Actually start the buffer capture up. Will start trigger 1448 if first device and appropriate. 1449 1450 Note that it might be impossible to configure other attributes, 1451 (e.g.: events, scale, sampling rate) if they impact the currently 1452 active buffer capture session. 1453 1454What: /sys/bus/iio/devices/iio:deviceX/bufferY 1455KernelVersion: 5.11 1456Contact: linux-iio@vger.kernel.org 1457Description: 1458 Directory containing interfaces for elements that will be 1459 captured for a single triggered sample set in the buffer. 1460 1461 Since kernel 5.11 the scan_elements attributes are merged into 1462 the bufferY directory, to be configurable per buffer. 1463 1464What: /sys/.../iio:deviceX/bufferY/in_accel_x_en 1465What: /sys/.../iio:deviceX/bufferY/in_accel_y_en 1466What: /sys/.../iio:deviceX/bufferY/in_accel_z_en 1467What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en 1468What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en 1469What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en 1470What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en 1471What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en 1472What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en 1473What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en 1474What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en 1475What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en 1476What: /sys/.../iio:deviceX/bufferY/in_magn_x_en 1477What: /sys/.../iio:deviceX/bufferY/in_magn_y_en 1478What: /sys/.../iio:deviceX/bufferY/in_magn_z_en 1479What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en 1480What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en 1481What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en 1482What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en 1483What: /sys/.../iio:deviceX/bufferY/in_timestamp_en 1484What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en 1485What: /sys/.../iio:deviceX/bufferY/in_voltageY_en 1486What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en 1487What: /sys/.../iio:deviceX/bufferY/in_incli_x_en 1488What: /sys/.../iio:deviceX/bufferY/in_incli_y_en 1489What: /sys/.../iio:deviceX/bufferY/in_pressureY_en 1490What: /sys/.../iio:deviceX/bufferY/in_pressure_en 1491What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_en 1492What: /sys/.../iio:deviceX/bufferY/in_proximity_en 1493KernelVersion: 5.11 1494Contact: linux-iio@vger.kernel.org 1495Description: 1496 Scan element control for triggered data capture. 1497 1498What: /sys/.../iio:deviceX/bufferY/in_accel_type 1499What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type 1500What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type 1501What: /sys/.../iio:deviceX/bufferY/in_anglvel_type 1502What: /sys/.../iio:deviceX/bufferY/in_magn_type 1503What: /sys/.../iio:deviceX/bufferY/in_incli_type 1504What: /sys/.../iio:deviceX/bufferY/in_voltageY_type 1505What: /sys/.../iio:deviceX/bufferY/in_voltage_type 1506What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type 1507What: /sys/.../iio:deviceX/bufferY/in_timestamp_type 1508What: /sys/.../iio:deviceX/bufferY/in_pressureY_type 1509What: /sys/.../iio:deviceX/bufferY/in_pressure_type 1510What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_type 1511What: /sys/.../iio:deviceX/bufferY/in_proximity_type 1512KernelVersion: 5.11 1513Contact: linux-iio@vger.kernel.org 1514Description: 1515 Description of the scan element data storage within the buffer 1516 and hence the form in which it is read from user-space. 1517 Form is [be|le]:[f|s|u]bits/storagebits[>>shift]. 1518 be or le specifies big or little endian. f means floating-point 1519 (IEEE 754 binary format), s means signed (2's complement), u means 1520 unsigned. bits is the number of bits of data and storagebits is the 1521 space (after padding) that it occupies in the buffer; when using a 1522 floating-point format, bits must be one of the width values defined 1523 in the IEEE 754 standard for binary interchange formats (e.g. 16 1524 indicates the binary16 format for half-precision numbers). shift, 1525 if specified, is the shift that needs to be applied prior to 1526 masking out unused bits. Some devices put their data in the middle 1527 of the transferred elements with additional information on both 1528 sides. Note that some devices will have additional information in 1529 the unused bits, so to get a clean value the bits value must be 1530 used to mask the buffer output value appropriately. The storagebits 1531 value also specifies the data alignment. So s48/64>>2 will be a 1532 signed 48-bit integer stored in a 64-bit location aligned to a 1533 64-bit boundary. To obtain the clean value, shift right 2 and apply 1534 a mask to zero the top 16 bits of the result. 1535 For other storage combinations this attribute will be extended 1536 appropriately. 1537 1538What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available 1539KernelVersion: 2.6.37 1540Contact: linux-iio@vger.kernel.org 1541Description: 1542 If the type parameter can take one of a small set of values, 1543 this attribute lists them. 1544 1545What: /sys/.../iio:deviceX/bufferY/in_voltageY_index 1546What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index 1547What: /sys/.../iio:deviceX/bufferY/in_accel_x_index 1548What: /sys/.../iio:deviceX/bufferY/in_accel_y_index 1549What: /sys/.../iio:deviceX/bufferY/in_accel_z_index 1550What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index 1551What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index 1552What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index 1553What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index 1554What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index 1555What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index 1556What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index 1557What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index 1558What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index 1559What: /sys/.../iio:deviceX/bufferY/in_magn_x_index 1560What: /sys/.../iio:deviceX/bufferY/in_magn_y_index 1561What: /sys/.../iio:deviceX/bufferY/in_magn_z_index 1562What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index 1563What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index 1564What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index 1565What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index 1566What: /sys/.../iio:deviceX/bufferY/in_incli_x_index 1567What: /sys/.../iio:deviceX/bufferY/in_incli_y_index 1568What: /sys/.../iio:deviceX/bufferY/in_timestamp_index 1569What: /sys/.../iio:deviceX/bufferY/in_pressureY_index 1570What: /sys/.../iio:deviceX/bufferY/in_pressure_index 1571What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_index 1572What: /sys/.../iio:deviceX/bufferY/in_proximity_index 1573KernelVersion: 5.11 1574Contact: linux-iio@vger.kernel.org 1575Description: 1576 A single positive integer specifying the position of this 1577 scan element in the buffer. Note these are not dependent on 1578 what is enabled and may not be contiguous. Thus for user-space 1579 to establish the full layout these must be used in conjunction 1580 with all _en attributes to establish which channels are present, 1581 and the relevant _type attributes to establish the data storage 1582 format. 1583 1584What: /sys/.../iio:deviceX/in_activity_still_input 1585What: /sys/.../iio:deviceX/in_activity_walking_input 1586What: /sys/.../iio:deviceX/in_activity_jogging_input 1587What: /sys/.../iio:deviceX/in_activity_running_input 1588KernelVersion: 3.19 1589Contact: linux-iio@vger.kernel.org 1590Description: 1591 This attribute is used to read the confidence for an activity 1592 expressed in units as percentage. 1593 1594What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw 1595KernelVersion: 2.6.38 1596Contact: linux-iio@vger.kernel.org 1597Description: 1598 This attribute is used to read the amount of quadrature error 1599 present in the device at a given time. 1600 1601What: /sys/.../iio:deviceX/in_accelY_power_mode 1602KernelVersion: 3.11 1603Contact: linux-iio@vger.kernel.org 1604Description: 1605 Specifies the chip power mode. 1606 low_noise: reduce noise level from ADC, 1607 low_power: enable low current consumption. 1608 For a list of available output power modes read 1609 in_accel_power_mode_available. 1610 1611What: /sys/.../iio:deviceX/in_energy_input 1612What: /sys/.../iio:deviceX/in_energy_raw 1613What: /sys/.../iio:deviceX/in_energyY_active_raw 1614What: /sys/.../iio:deviceX/in_energyY_reactive_raw 1615What: /sys/.../iio:deviceX/in_energyY_apparent_raw 1616KernelVersion: 4.0 1617Contact: linux-iio@vger.kernel.org 1618Description: 1619 This attribute is used to read the energy value reported by the 1620 device (e.g.: human activity sensors report energy burnt by the 1621 user). Units after application of scale are Joules. 1622 1623What: /sys/.../iio:deviceX/in_distance_input 1624What: /sys/.../iio:deviceX/in_distance_raw 1625KernelVersion: 4.0 1626Contact: linux-iio@vger.kernel.org 1627Description: 1628 This attribute is used to read the measured distance to an object 1629 or the distance covered by the user since the last reboot while 1630 activated. Units after application of scale are meters. 1631 1632What: /sys/bus/iio/devices/iio:deviceX/store_eeprom 1633KernelVersion: 3.4.0 1634Contact: linux-iio@vger.kernel.org 1635Description: 1636 Writing '1' stores the current device configuration into 1637 on-chip EEPROM. After power-up or chip reset the device will 1638 automatically load the saved configuration. 1639 1640What: /sys/.../iio:deviceX/in_proximity_raw 1641What: /sys/.../iio:deviceX/in_proximity_input 1642What: /sys/.../iio:deviceX/in_proximityY_raw 1643KernelVersion: 3.4 1644Contact: linux-iio@vger.kernel.org 1645Description: 1646 Proximity measurement indicating that some 1647 object is near the sensor, usually by observing 1648 reflectivity of infrared or ultrasound emitted. 1649 1650 Often these sensors are unit less and as such conversion 1651 to SI units is not possible. Higher proximity measurements 1652 indicate closer objects, and vice versa. Units after 1653 application of scale and offset are meters. 1654 1655What: /sys/.../iio:deviceX/in_illuminance_input 1656What: /sys/.../iio:deviceX/in_illuminance_raw 1657What: /sys/.../iio:deviceX/in_illuminanceY_input 1658What: /sys/.../iio:deviceX/in_illuminanceY_raw 1659What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw 1660What: /sys/.../iio:deviceX/in_illuminance_ir_raw 1661What: /sys/.../iio:deviceX/in_illuminance_clear_raw 1662KernelVersion: 3.4 1663Contact: linux-iio@vger.kernel.org 1664Description: 1665 Illuminance measurement, units after application of scale 1666 and offset are lux. 1667 1668What: /sys/.../iio:deviceX/in_intensityY_raw 1669What: /sys/.../iio:deviceX/in_intensityY_ir_raw 1670What: /sys/.../iio:deviceX/in_intensityY_both_raw 1671What: /sys/.../iio:deviceX/in_intensityY_uv_raw 1672What: /sys/.../iio:deviceX/in_intensityY_uva_raw 1673What: /sys/.../iio:deviceX/in_intensityY_uvb_raw 1674What: /sys/.../iio:deviceX/in_intensityY_duv_raw 1675What: /sys/.../iio:deviceX/in_intensity_red_raw 1676What: /sys/.../iio:deviceX/in_intensity_green_raw 1677What: /sys/.../iio:deviceX/in_intensity_blue_raw 1678What: /sys/.../iio:deviceX/in_intensity_clear_raw 1679KernelVersion: 3.4 1680Contact: linux-iio@vger.kernel.org 1681Description: 1682 Unit-less light intensity. Modifiers both and ir indicate 1683 that measurements contain visible and infrared light 1684 components or just infrared light, respectively. Modifier 1685 uv indicates that measurements contain ultraviolet light 1686 components. Modifiers uva, uvb and duv indicate that 1687 measurements contain A, B or deep (C) ultraviolet light 1688 components respectively. 1689 1690What: /sys/.../iio:deviceX/in_uvindex_input 1691KernelVersion: 4.6 1692Contact: linux-iio@vger.kernel.org 1693Description: 1694 UV light intensity index measuring the human skin's response to 1695 different wavelength of sunlight weighted according to the 1696 standardised CIE Erythemal Action Spectrum. UV index values range 1697 from 0 (low) to >=11 (extreme). 1698 1699What: /sys/.../iio:deviceX/in_intensity_integration_time 1700What: /sys/.../iio:deviceX/in_intensity_red_integration_time 1701What: /sys/.../iio:deviceX/in_intensity_green_integration_time 1702What: /sys/.../iio:deviceX/in_intensity_blue_integration_time 1703What: /sys/.../iio:deviceX/in_intensity_clear_integration_time 1704What: /sys/.../iio:deviceX/in_illuminance_integration_time 1705KernelVersion: 3.12 1706Contact: linux-iio@vger.kernel.org 1707Description: 1708 This attribute is used to get/set the integration time in 1709 seconds. If shared across all channels of a given type, 1710 <type>_integration_time is used. 1711 1712What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time 1713KernelVersion: 4.0 1714Contact: linux-iio@vger.kernel.org 1715Description: 1716 Number of seconds in which to compute speed. 1717 1718What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw 1719KernelVersion: 3.15 1720Contact: linux-iio@vger.kernel.org 1721Description: 1722 Raw value of quaternion components using a format 1723 x y z w. Here x, y, and z component represents the axis about 1724 which a rotation will occur and w component represents the 1725 amount of rotation. 1726 1727What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw 1728What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw 1729What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw 1730What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw 1731KernelVersion: 3.15 1732Contact: linux-iio@vger.kernel.org 1733Description: 1734 Raw value of rotation from true/magnetic north measured with 1735 or without compensation from tilt sensors. 1736 1737What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw 1738What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw 1739KernelVersion: 3.17 1740Contact: linux-iio@vger.kernel.org 1741Description: 1742 Raw current measurement from channel Y. Units are in milliamps 1743 after application of scale and offset. If no offset or scale is 1744 present, output should be considered as processed with the 1745 unit in milliamps. In special cases where the channel does not 1746 correspond to externally available input one of the named 1747 versions may be used. 1748 1749 Channels with 'i' and 'q' modifiers always exist in pairs and both 1750 channels refer to the same signal. The 'i' channel contains the in-phase 1751 component of the signal while the 'q' channel contains the quadrature 1752 component. 1753 1754What: /sys/bus/iio/devices/iio:deviceX/in_altcurrentY_rms_raw 1755KernelVersion: 6.18 1756Contact: linux-iio@vger.kernel.org 1757Description: 1758 Raw (unscaled no bias removal etc.) Root Mean Square (RMS) current 1759 measurement from channel Y. Units after application of scale and 1760 offset are milliamps. 1761 1762What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternionaxis_raw 1763KernelVersion: 7.1 1764Contact: linux-iio@vger.kernel.org 1765Description: 1766 Raw value of {x, y, z} components of the quaternion vector. These 1767 components represent the axis about which a rotation occurs, and are 1768 subject to the following constraints: 1769 1770 - the quaternion vector is normalized, i.e. w^2 + x^2 + y^2 + z^2 = 1 1771 - the rotation angle is within the [-pi, pi] range, i.e. the w 1772 component (which represents the amount of rotation) is non-negative 1773 1774 These constraints allow the w value to be calculated from the other 1775 components: w = sqrt(1 - (x^2 + y^2 + z^2)). 1776 1777What: /sys/.../iio:deviceX/in_energy_en 1778What: /sys/.../iio:deviceX/in_distance_en 1779What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en 1780What: /sys/.../iio:deviceX/in_steps_en 1781KernelVersion: 3.19 1782Contact: linux-iio@vger.kernel.org 1783Description: 1784 Activates a device feature that runs in firmware/hardware. 1785 E.g. for steps: the pedometer saves power while not used; 1786 when activated, it will count the steps taken by the user in 1787 firmware and export them through in_steps_input. 1788 1789What: /sys/.../iio:deviceX/in_steps_input 1790KernelVersion: 3.19 1791Contact: linux-iio@vger.kernel.org 1792Description: 1793 This attribute is used to read the number of steps taken by the user 1794 since the last reboot while activated. 1795 1796What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input 1797What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw 1798KernelVersion: 3.19 1799Contact: linux-iio@vger.kernel.org 1800Description: 1801 This attribute is used to read the current speed value of the 1802 user (which is the norm or magnitude of the velocity vector). 1803 Units after application of scale are m/s. 1804 1805What: /sys/.../iio:deviceX/in_steps_debounce_count 1806KernelVersion: 4.0 1807Contact: linux-iio@vger.kernel.org 1808Description: 1809 Specifies the number of steps that must occur within 1810 in_steps_filter_debounce_time for the pedometer to decide the 1811 consumer is making steps. 1812 1813What: /sys/.../iio:deviceX/in_steps_debounce_time 1814KernelVersion: 4.0 1815Contact: linux-iio@vger.kernel.org 1816Description: 1817 Specifies number of seconds in which we compute the steps 1818 that occur in order to decide if the consumer is making steps. 1819 1820What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark 1821KernelVersion: 5.11 1822Contact: linux-iio@vger.kernel.org 1823Description: 1824 A single positive integer specifying the maximum number of scan 1825 elements to wait for. 1826 1827 Poll will block until the watermark is reached. 1828 1829 Blocking read will wait until the minimum between the requested 1830 read amount or the low water mark is available. 1831 1832 Non-blocking read will retrieve the available samples from the 1833 buffer even if there are less samples then watermark level. This 1834 allows the application to block on poll with a timeout and read 1835 the available samples after the timeout expires and thus have a 1836 maximum delay guarantee. 1837 1838What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available 1839KernelVersion: 5.11 1840Contact: linux-iio@vger.kernel.org 1841Description: 1842 A read-only value indicating the bytes of data available in the 1843 buffer. In the case of an output buffer, this indicates the 1844 amount of empty space available to write data to. In the case of 1845 an input buffer, this indicates the amount of data available for 1846 reading. 1847 1848What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled 1849KernelVersion: 4.2 1850Contact: linux-iio@vger.kernel.org 1851Description: 1852 A read-only boolean value that indicates if the hardware fifo is 1853 currently enabled or disabled. If the device does not have a 1854 hardware fifo this entry is not present. 1855 The hardware fifo is enabled when the buffer is enabled if the 1856 current hardware fifo watermark level is set and other current 1857 device settings allows it (e.g. if a trigger is set that samples 1858 data differently that the hardware fifo does then hardware fifo 1859 will not enabled). 1860 1861 If the hardware fifo is enabled and the level of the hardware 1862 fifo reaches the hardware fifo watermark level the device will 1863 flush its hardware fifo to the device buffer. Doing a non 1864 blocking read on the device when no samples are present in the 1865 device buffer will also force a flush. 1866 1867 When the hardware fifo is enabled there is no need to use a 1868 trigger to use buffer mode since the watermark settings 1869 guarantees that the hardware fifo is flushed to the device 1870 buffer. 1871 1872What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout 1873KernelVersion: 4.12 1874Contact: linux-iio@vger.kernel.org 1875Description: 1876 A read/write property to provide capability to delay reporting of 1877 samples till a timeout is reached. This allows host processors to 1878 sleep, while the sensor is storing samples in its internal fifo. 1879 The maximum timeout in seconds can be specified by setting 1880 hwfifo_timeout.The current delay can be read by reading 1881 hwfifo_timeout. A value of 0 means that there is no timeout. 1882 1883What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark 1884KernelVersion: 4.2 1885Contact: linux-iio@vger.kernel.org 1886Description: 1887 Read-only entry that contains a single integer specifying the 1888 current watermark level for the hardware fifo. If the device 1889 does not have a hardware fifo this entry is not present. 1890 The watermark level for the hardware fifo is set by the driver 1891 based on the value set by the user in buffer/watermark but 1892 taking into account hardware limitations (e.g. most hardware 1893 buffers are limited to 32-64 samples, some hardware buffers 1894 watermarks are fixed or have minimum levels). A value of 0 1895 means that the hardware watermark is unset. 1896 1897What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min 1898KernelVersion: 4.2 1899Contact: linux-iio@vger.kernel.org 1900Description: 1901 A single positive integer specifying the minimum watermark level 1902 for the hardware fifo of this device. If the device does not 1903 have a hardware fifo this entry is not present. 1904 1905 If the user sets buffer/watermark to a value less than this one, 1906 then the hardware watermark will remain unset. 1907 1908What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max 1909KernelVersion: 4.2 1910Contact: linux-iio@vger.kernel.org 1911Description: 1912 A single positive integer specifying the maximum watermark level 1913 for the hardware fifo of this device. If the device does not 1914 have a hardware fifo this entry is not present. 1915 1916 If the user sets buffer/watermark to a value greater than this 1917 one, then the hardware watermark will be capped at this value. 1918 1919What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available 1920KernelVersion: 4.2 1921Contact: linux-iio@vger.kernel.org 1922Description: 1923 A list of positive integers specifying the available watermark 1924 levels for the hardware fifo. This entry is optional and if it 1925 is not present it means that all the values between 1926 hwfifo_watermark_min and hwfifo_watermark_max are supported. 1927 1928 If the user sets buffer/watermark to a value greater than 1929 hwfifo_watermak_min but not equal to any of the values in this 1930 list, the driver will chose an appropriate value for the 1931 hardware fifo watermark level. 1932 1933What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity 1934What: /sys/bus/iio/devices/iio:deviceX/in_tempY_calibemissivity 1935What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity 1936What: /sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibemissivity 1937KernelVersion: 4.1 1938Contact: linux-iio@vger.kernel.org 1939Description: 1940 The emissivity ratio of the surface in the field of view of the 1941 contactless temperature sensor. Emissivity varies from 0 to 1, 1942 with 1 being the emissivity of a black body. 1943 1944What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio 1945What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio 1946What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio 1947KernelVersion: 4.2 1948Contact: linux-iio@vger.kernel.org 1949Description: 1950 Hardware applied number of measurements for acquiring one 1951 data point. The HW will do <type>[_name]_oversampling_ratio 1952 measurements and return the average value as output data. Each 1953 value resulted from <type>[_name]_oversampling_ratio measurements 1954 is considered as one sample for <type>[_name]_sampling_frequency. 1955 1956What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw 1957What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_raw 1958What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw 1959What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_co2_raw 1960What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw 1961What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_ethanol_raw 1962What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw 1963What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_h2_raw 1964What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw 1965What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_o2_raw 1966What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw 1967What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_voc_raw 1968KernelVersion: 4.3 1969Contact: linux-iio@vger.kernel.org 1970Description: 1971 Raw (unscaled no offset etc.) reading of a substance. Units 1972 after application of scale and offset are percents. 1973 1974What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw 1975What: /sys/bus/iio/devices/iio:deviceX/in_resistanceY_raw 1976What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw 1977What: /sys/bus/iio/devices/iio:deviceX/out_resistanceY_raw 1978KernelVersion: 4.3 1979Contact: linux-iio@vger.kernel.org 1980Description: 1981 Raw (unscaled no offset etc.) resistance reading. 1982 Units after application of scale and offset are ohms. 1983 1984What: /sys/bus/iio/devices/iio:deviceX/in_coverageY_raw 1985KernelVersion: 7.2 1986Contact: linux-iio@vger.kernel.org 1987Description: 1988 Raw (unscaled no offset etc.) coverage reading. Used for sensors 1989 that report fractional coverage as a percentage, such as leak 1990 detectors where the value represents what portion of the sensing 1991 element is wetted. Units after application of scale and offset are 1992 percent. 1993 1994What: /sys/bus/iio/devices/iio:deviceX/in_coverageY_scale 1995KernelVersion: 7.2 1996Contact: linux-iio@vger.kernel.org 1997Description: 1998 Scale to be applied to in_coverageY_raw to obtain coverage 1999 in percent. 2000 2001What: /sys/bus/iio/devices/iio:deviceX/heater_enable 2002KernelVersion: 4.1.0 2003Contact: linux-iio@vger.kernel.org 2004Description: 2005 '1' (enable) or '0' (disable) specifying the enable 2006 of heater function. Same reading values apply. 2007 2008 This ABI is especially applicable for humidity sensors 2009 to heatup the device and get rid of any condensation 2010 in some humidity environment 2011 2012What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw 2013KernelVersion: 4.5 2014Contact: linux-iio@vger.kernel.org 2015Description: 2016 Raw (unscaled no offset etc.) pH reading of a substance as a negative 2017 base-10 logarithm of hydrodium ions in a litre of water. 2018 2019What: /sys/bus/iio/devices/iio:deviceX/mount_matrix 2020What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix 2021What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix 2022What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix 2023What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix 2024KernelVersion: 4.6 2025Contact: linux-iio@vger.kernel.org 2026Description: 2027 Mounting matrix for IIO sensors. This is a rotation matrix which 2028 informs userspace about sensor chip's placement relative to the 2029 main hardware it is mounted on. 2030 2031 Main hardware placement is defined according to the local 2032 reference frame related to the physical quantity the sensor 2033 measures. 2034 2035 Given that the rotation matrix is defined in a board specific 2036 way (platform data and / or device-tree), the main hardware 2037 reference frame definition is left to the implementor's choice 2038 (see below for a magnetometer example). 2039 2040 Applications should apply this rotation matrix to samples so 2041 that when main hardware reference frame is aligned onto local 2042 reference frame, then sensor chip reference frame is also 2043 perfectly aligned with it. 2044 2045 Matrix is a 3x3 unitary matrix and typically looks like 2046 [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix 2047 [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware 2048 are perfectly aligned with each other. 2049 2050 For example, a mounting matrix for a magnetometer sensor informs 2051 userspace about sensor chip's ORIENTATION relative to the main 2052 hardware. 2053 2054 More specifically, main hardware orientation is defined with 2055 respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : 2056 2057 * Y is in the ground plane and positive towards magnetic North ; 2058 * X is in the ground plane, perpendicular to the North axis and 2059 positive towards the East ; 2060 * Z is perpendicular to the ground plane and positive upwards. 2061 2062 An implementor might consider that for a hand-held device, a 2063 'natural' orientation would be 'front facing camera at the top'. 2064 The main hardware reference frame could then be described as : 2065 2066 * Y is in the plane of the screen and is positive towards the 2067 top of the screen ; 2068 * X is in the plane of the screen, perpendicular to Y axis, and 2069 positive towards the right hand side of the screen ; 2070 * Z is perpendicular to the screen plane and positive out of the 2071 screen. 2072 2073 Another example for a quadrotor UAV might be : 2074 2075 * Y is in the plane of the propellers and positive towards the 2076 front-view camera; 2077 * X is in the plane of the propellers, perpendicular to Y axis, 2078 and positive towards the starboard side of the UAV ; 2079 * Z is perpendicular to propellers plane and positive upwards. 2080 2081What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw 2082KernelVersion: 4.8 2083Contact: linux-iio@vger.kernel.org 2084Description: 2085 Raw (unscaled no offset etc.) electric conductivity reading. 2086 Units after application of scale and offset are siemens per 2087 meter. 2088 2089What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw 2090KernelVersion: 4.10 2091Contact: linux-iio@vger.kernel.org 2092Description: 2093 This interface is deprecated; please use the Counter subsystem. 2094 2095 Raw counter device counts from channel Y. For quadrature 2096 counters, multiplication by an available [Y]_scale results in 2097 the counts of a single quadrature signal phase from channel Y. 2098 2099What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw 2100KernelVersion: 4.10 2101Contact: linux-iio@vger.kernel.org 2102Description: 2103 This interface is deprecated; please use the Counter subsystem. 2104 2105 Raw counter device index value from channel Y. This attribute 2106 provides an absolute positional reference (e.g. a pulse once per 2107 revolution) which may be used to home positional systems as 2108 required. 2109 2110What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available 2111KernelVersion: 4.12 2112Contact: linux-iio@vger.kernel.org 2113Description: 2114 This interface is deprecated; please use the Counter subsystem. 2115 2116 A list of possible counting directions which are: 2117 2118 - "up" : counter device is increasing. 2119 - "down": counter device is decreasing. 2120 2121What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction 2122KernelVersion: 4.12 2123Contact: linux-iio@vger.kernel.org 2124Description: 2125 This interface is deprecated; please use the Counter subsystem. 2126 2127 Raw counter device counters direction for channel Y. 2128 2129What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label 2130What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label 2131KernelVersion: 5.8 2132Contact: linux-iio@vger.kernel.org 2133Description: 2134 Optional symbolic label to a device channel. 2135 If a label is defined for this channel add that to the channel 2136 specific attributes. This is useful for userspace to be able to 2137 better identify an individual channel. 2138 2139What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw 2140KernelVersion: 4.18 2141Contact: linux-iio@vger.kernel.org 2142Description: 2143 Raw (unscaled) phase difference reading from channel Y. 2144 Units after application of scale and offset are radians. 2145 2146What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input 2147What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input 2148What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input 2149What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input 2150What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input 2151What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input 2152What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input 2153What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input 2154KernelVersion: 4.22 2155Contact: linux-iio@vger.kernel.org 2156Description: 2157 Mass concentration reading of particulate matter in ug / m3. 2158 pmX consists of particles with aerodynamic diameter less or 2159 equal to X micrometers. 2160 2161What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available 2162Date: November 2019 2163KernelVersion: 5.4 2164Contact: linux-iio@vger.kernel.org 2165Description: 2166 List of valid periods (in seconds) for which the light intensity 2167 must be above the threshold level before interrupt is asserted. 2168 2169What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency 2170KernelVersion: 5.5 2171Contact: linux-iio@vger.kernel.org 2172Description: 2173 Center frequency in Hz for a notch filter. Used i.e. for line 2174 noise suppression. 2175 2176What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type 2177KernelVersion: 5.5 2178Contact: linux-iio@vger.kernel.org 2179Description: 2180 One of the following thermocouple types: B, E, J, K, N, R, S, T. 2181 2182What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient 2183What: /sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibambient 2184KernelVersion: 5.10 2185Contact: linux-iio@vger.kernel.org 2186Description: 2187 Calibrated ambient temperature for object temperature 2188 calculation in milli degrees Celsius. 2189 2190What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw 2191What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw 2192What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw 2193KernelVersion: 5.10 2194Contact: linux-iio@vger.kernel.org 2195Description: 2196 Unscaled light intensity according to CIE 1931/DIN 5033 color space. 2197 Units after application of scale are nano nanowatts per square meter. 2198 2199What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label 2200KernelVersion: 5.12 2201Contact: linux-iio@vger.kernel.org 2202Description: 2203 Optional symbolic label for channel Y. 2204 For Intel hid hinge sensor, the label values are: 2205 hinge, keyboard, screen. It means the three channels 2206 each correspond respectively to hinge angle, keyboard angle, 2207 and screen angle. 2208 2209What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative 2210What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative 2211KernelVersion: 5.12 2212Contact: linux-iio@vger.kernel.org 2213Description: 2214 Specify the percent for light sensor relative to the channel 2215 absolute value that a data field should change before an event 2216 is generated. Units are a percentage of the prior reading. 2217 2218What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable 2219Date: June 2020 2220KernelVersion: 5.8 2221Contact: linux-iio@vger.kernel.org 2222Description: 2223 Some sensors have the ability to apply auto calibration at 2224 runtime. For example, it may be necessary to compensate for 2225 contaminant build-up in a measurement chamber or optical 2226 element deterioration that would otherwise lead to sensor drift. 2227 2228 Writing 1 or 0 to this attribute will respectively activate or 2229 deactivate this auto calibration function. 2230 2231 Upon reading, the current status is returned. 2232 2233What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value 2234Date: June 2020 2235KernelVersion: 5.8 2236Contact: linux-iio@vger.kernel.org 2237Description: 2238 Some sensors have the ability to apply a manual calibration using 2239 a known measurement value, perhaps obtained from an external 2240 reference device. 2241 2242 Writing a value to this function will force such a calibration 2243 change. For the scd30 the value should be from the range 2244 [400 1 2000]. 2245 2246 Note for the scd30 that a valid value may only be obtained once 2247 it is has been written. Until then any read back of this value 2248 should be ignored. As for the scd4x an error will be returned 2249 immediately if the manual calibration has failed. 2250 2251What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available 2252KernelVersion: 5.15 2253Contact: linux-iio@vger.kernel.org 2254Description: 2255 Available range for the forced calibration value, expressed as: 2256 2257 - a range specified as "[min step max]" 2258 2259What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_sampling_frequency 2260What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency 2261What: /sys/bus/iio/devices/iio:deviceX/in_currentY_sampling_frequency 2262KernelVersion: 5.20 2263Contact: linux-iio@vger.kernel.org 2264Description: 2265 Some devices have separate controls of sampling frequency for 2266 individual channels. If multiple channels are enabled in a scan, 2267 then the sampling_frequency of the scan may be computed from the 2268 per channel sampling frequencies. 2269 2270What: /sys/.../events/in_accel_gesture_singletap_en 2271What: /sys/.../events/in_accel_gesture_doubletap_en 2272KernelVersion: 6.1 2273Contact: linux-iio@vger.kernel.org 2274Description: 2275 Device generates an event on a single or double tap. 2276 2277What: /sys/.../events/in_accel_gesture_singletap_value 2278What: /sys/.../events/in_accel_gesture_doubletap_value 2279KernelVersion: 6.1 2280Contact: linux-iio@vger.kernel.org 2281Description: 2282 Specifies the threshold value that the device is comparing 2283 against to generate the tap gesture event. The lower 2284 threshold value increases the sensitivity of tap detection. 2285 Units and the exact meaning of value are device-specific. 2286 2287What: /sys/.../events/in_accel_gesture_tap_value_available 2288KernelVersion: 6.1 2289Contact: linux-iio@vger.kernel.org 2290Description: 2291 Lists all available threshold values which can be used to 2292 modify the sensitivity of the tap detection. 2293 2294What: /sys/.../events/in_accel_gesture_singletap_reset_timeout 2295What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout 2296KernelVersion: 6.1 2297Contact: linux-iio@vger.kernel.org 2298Description: 2299 Specifies the timeout value in seconds for the tap detector 2300 to not to look for another tap event after the event as 2301 occurred. Basically the minimum quiet time between the two 2302 single-tap's or two double-tap's. 2303 2304What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available 2305KernelVersion: 6.1 2306Contact: linux-iio@vger.kernel.org 2307Description: 2308 Lists all available tap reset timeout values. Units in seconds. 2309 2310What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay 2311KernelVersion: 6.1 2312Contact: linux-iio@vger.kernel.org 2313Description: 2314 Specifies the minimum quiet time in seconds between the two 2315 taps of a double tap. 2316 2317What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available 2318KernelVersion: 6.1 2319Contact: linux-iio@vger.kernel.org 2320Description: 2321 Lists all available delay values between two taps in the double 2322 tap. Units in seconds. 2323 2324What: /sys/.../events/in_accel_gesture_tap_maxtomin_time 2325KernelVersion: 6.1 2326Contact: linux-iio@vger.kernel.org 2327Description: 2328 Specifies the maximum time difference allowed between upper 2329 and lower peak of tap to consider it as the valid tap event. 2330 Units in seconds. 2331 2332What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available 2333KernelVersion: 6.1 2334Contact: linux-iio@vger.kernel.org 2335Description: 2336 Lists all available time values between upper peak to lower 2337 peak. Units in seconds. 2338 2339What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw 2340What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw 2341What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw 2342KernelVersion: 6.1 2343Contact: linux-iio@vger.kernel.org 2344Description: 2345 Raw (unscaled) euler angles readings. Units after 2346 application of scale are deg. 2347 2348What: /sys/bus/iio/devices/iio:deviceX/serialnumber 2349KernelVersion: 6.1 2350Contact: linux-iio@vger.kernel.org 2351Description: 2352 An example format is 16-bytes, 2-digits-per-byte, HEX-string 2353 representing the sensor unique ID number. 2354 2355What: /sys/bus/iio/devices/iio:deviceX/filter_type_available 2356What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_type_available 2357KernelVersion: 6.1 2358Contact: linux-iio@vger.kernel.org 2359Description: 2360 Reading returns a list with the possible filter modes. Options 2361 for the attribute: 2362 2363 * "none" - Filter is disabled/bypassed. 2364 * "sinc1" - The digital sinc1 filter. Fast 1st 2365 conversion time. Poor noise performance. 2366 * "sinc3" - The digital sinc3 filter. Moderate 1st 2367 conversion time. Good noise performance. 2368 * "sinc3+pf1" - Sinc3 + device specific Post Filter 1. 2369 * "sinc3+pf2" - Sinc3 + device specific Post Filter 2. 2370 * "sinc3+pf3" - Sinc3 + device specific Post Filter 3. 2371 * "sinc3+pf4" - Sinc3 + device specific Post Filter 4. 2372 * "sinc3+rej60" - Sinc3 + 60Hz rejection. 2373 * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion 2374 time. 2375 * "sinc4" - Sinc 4. Excellent noise performance. Long 2376 1st conversion time. 2377 * "sinc4+lp" - Sinc4 + Low Pass Filter. 2378 * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion 2379 time. 2380 * "sinc4+rej60" - Sinc4 + 60Hz rejection. 2381 * "sinc5" - The digital sinc5 filter. Excellent noise 2382 performance 2383 * "sinc5+avg" - Sinc5 + averaging by 4. 2384 * "sinc5+pf1" - Sinc5 + device specific Post Filter 1. 2385 * "sinc5+sinc1" - Sinc5 + Sinc1. 2386 * "sinc5+sinc1+pf1" - Sinc5 + Sinc1 + device specific Post Filter 1. 2387 * "sinc5+sinc1+pf2" - Sinc5 + Sinc1 + device specific Post Filter 2. 2388 * "sinc5+sinc1+pf3" - Sinc5 + Sinc1 + device specific Post Filter 3. 2389 * "sinc5+sinc1+pf4" - Sinc5 + Sinc1 + device specific Post Filter 4. 2390 * "wideband" - filter with wideband low ripple passband 2391 and sharp transition band. 2392 2393What: /sys/bus/iio/devices/iio:deviceX/filter_type 2394What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_type 2395KernelVersion: 6.1 2396Contact: linux-iio@vger.kernel.org 2397Description: 2398 Specifies which filter type apply to the channel. The possible 2399 values are given by the filter_type_available attribute. 2400 2401What: /sys/.../events/in_proximity_thresh_either_runningperiod 2402KernelVersion: 6.6 2403Contact: linux-iio@vger.kernel.org 2404Description: 2405 A running period of time (in seconds) for which 2406 in_proximity_thresh_either_runningcount amount of conditions 2407 must occur before an event is generated. If direction is not 2408 specified then this period applies to both directions. 2409 2410What: /sys/.../events/in_proximity_thresh_either_runningcount 2411KernelVersion: 6.6 2412Contact: linux-iio@vger.kernel.org 2413Description: 2414 Number of conditions that must occur, during a running 2415 period, before an event is generated. 2416 2417What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw 2418KernelVersion: 6.7 2419Contact: linux-iio@vger.kernel.org 2420Description: 2421 Represents light color temperature, which measures light color 2422 temperature in Kelvin. 2423 2424What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw 2425What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw 2426KernelVersion: 6.7 2427Contact: linux-iio@vger.kernel.org 2428Description: 2429 The x and y light color coordinate on the CIE 1931 chromaticity 2430 diagram. 2431 2432What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label 2433What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label 2434What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label 2435What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label 2436What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label 2437What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label 2438What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label 2439KernelVersion: 6.7 2440Contact: linux-iio@vger.kernel.org 2441Description: 2442 Optional symbolic label to a device channel event. 2443 If a label is defined for this event add that to the event 2444 specific attributes. This is useful for userspace to be able to 2445 better identify an individual event. 2446 2447What: /sys/.../events/in_accel_gesture_tap_wait_timeout 2448KernelVersion: 6.7 2449Contact: linux-iio@vger.kernel.org 2450Description: 2451 Enable tap gesture confirmation with timeout. 2452 2453What: /sys/.../events/in_accel_gesture_tap_wait_dur 2454KernelVersion: 6.7 2455Contact: linux-iio@vger.kernel.org 2456Description: 2457 Timeout value in seconds for tap gesture confirmation. 2458 2459What: /sys/.../events/in_accel_gesture_tap_wait_dur_available 2460KernelVersion: 6.7 2461Contact: linux-iio@vger.kernel.org 2462Description: 2463 List of available timeout value for tap gesture confirmation. 2464 2465What: /sys/.../iio:deviceX/in_shunt_resistor 2466What: /sys/.../iio:deviceX/in_current_shunt_resistor 2467What: /sys/.../iio:deviceX/in_power_shunt_resistor 2468KernelVersion: 6.10 2469Contact: linux-iio@vger.kernel.org 2470Description: 2471 The value of current sense resistor in Ohms. 2472 2473What: /sys/.../iio:deviceX/in_attention_input 2474KernelVersion: 6.13 2475Contact: linux-iio@vger.kernel.org 2476Description: 2477 Value representing the user's attention to the system expressed 2478 in units as percentage. This usually means if the user is 2479 looking at the screen or not. 2480 2481What: /sys/.../events/in_accel_value_available 2482KernelVersion: 6.18 2483Contact: linux-iio@vger.kernel.org 2484Description: 2485 List of available threshold values for acceleration event 2486 generation. Applies to all event types on in_accel channels. 2487 Units after application of scale and offset are m/s^2. 2488 Expressed as: 2489 2490 - a range specified as "[min step max]" 2491 2492What: /sys/.../events/in_accel_period_available 2493KernelVersion: 6.18 2494Contact: linux-iio@vger.kernel.org 2495Description: 2496 List of available periods for accelerometer event detection in 2497 seconds, expressed as: 2498 2499 - a range specified as "[min step max]" 2500