1What: /sys/bus/iio/devices/iio:deviceX 2KernelVersion: 2.6.35 3Contact: linux-iio@vger.kernel.org 4Description: 5 Hardware chip or device accessed by one communication port. 6 Corresponds to a grouping of sensor channels. X is the IIO 7 index of the device. 8 9What: /sys/bus/iio/devices/triggerX 10KernelVersion: 2.6.35 11Contact: linux-iio@vger.kernel.org 12Description: 13 An event driven driver of data capture to an in kernel buffer. 14 May be provided by a device driver that also has an IIO device 15 based on hardware generated events (e.g. data ready) or 16 provided by a separate driver for other hardware (e.g. 17 periodic timer, GPIO or high resolution timer). 18 19 Contains trigger type specific elements. These do not 20 generalize well and hence are not documented in this file. 21 X is the IIO index of the trigger. 22 23What: /sys/bus/iio/devices/iio:deviceX/buffer 24KernelVersion: 2.6.35 25Contact: linux-iio@vger.kernel.org 26Description: 27 Directory of attributes relating to the buffer for the device. 28 29What: /sys/bus/iio/devices/iio:deviceX/name 30KernelVersion: 2.6.35 31Contact: linux-iio@vger.kernel.org 32Description: 33 Description of the physical chip / device for device X. 34 Typically a part number. 35 36What: /sys/bus/iio/devices/iio:deviceX/label 37KernelVersion: 5.8 38Contact: linux-iio@vger.kernel.org 39Description: 40 Optional symbolic label for a device. 41 This is useful for userspace to be able to better identify an 42 individual device. 43 44 The contents of the label are free-form, but there are some 45 standardized uses: 46 47 For proximity sensors which give the proximity (of a person) to 48 a certain wlan or wwan antenna the following standardized labels 49 are used: 50 51 * "proximity-wifi" 52 * "proximity-lte" 53 * "proximity-wifi-lte" 54 * "proximity-wifi-left" 55 * "proximity-wifi-right" 56 57 These are used to indicate to userspace that these proximity 58 sensors may be used to tune transmit power to ensure that 59 Specific Absorption Rate (SAR) limits are honored. 60 The "-left" and "-right" labels are for devices with multiple 61 antennas. 62 63 In some laptops/tablets the standardized proximity sensor labels 64 instead indicate proximity to a specific part of the device: 65 66 * "proximity-palmrest" indicates proximity to the keyboard's palmrest 67 * "proximity-palmrest-left" indicates proximity to the left part of the palmrest 68 * "proximity-palmrest-right" indicates proximity to the right part of the palmrest 69 * "proximity-lap" indicates the device is being used on someone's lap 70 71 Note "proximity-lap" is special in that its value may be 72 calculated by firmware from other sensor readings, rather then 73 being a raw sensor reading. 74 75 For accelerometers used in 2-in-1s with 360° (yoga-style) hinges, 76 which have an accelerometer in both their base and their display, 77 the following standardized labels are used: 78 79 * "accel-base" 80 * "accel-display" 81 82 For devices where an accelerometer is housed in the swivel camera subassembly 83 (for AR application), the following standardized label is used: 84 85 * "accel-camera" 86 87What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock 88KernelVersion: 4.5 89Contact: linux-iio@vger.kernel.org 90Description: 91 String identifying current posix clock used to timestamp 92 buffered samples and events for device X. 93 94What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency 95What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency 96What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency 97What: /sys/bus/iio/devices/iio:deviceX/events/sampling_frequency 98What: /sys/bus/iio/devices/triggerX/sampling_frequency 99KernelVersion: 2.6.35 100Contact: linux-iio@vger.kernel.org 101Description: 102 Some devices have internal clocks. This parameter sets the 103 resulting sampling frequency. In many devices this 104 parameter has an effect on input filters etc. rather than 105 simply controlling when the input is sampled. As this 106 affects data ready triggers, hardware buffers and the sysfs 107 direct access interfaces, it may be found in any of the 108 relevant directories. If it affects all of the above 109 then it is to be found in the base device directory. 110 111 The stm32-timer-trigger has the additional characteristic that 112 a sampling_frequency of 0 is defined to stop sampling. 113 114What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available 115What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available 116What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available 117What: /sys/.../iio:deviceX/buffer/sampling_frequency_available 118What: /sys/bus/iio/devices/triggerX/sampling_frequency_available 119KernelVersion: 2.6.35 120Contact: linux-iio@vger.kernel.org 121Description: 122 When the internal sampling clock can only take a specific set of 123 frequencies, we can specify the available values with: 124 125 - a small discrete set of values like "0 2 4 6 8" 126 - a range with minimum, step and maximum frequencies like 127 "[min step max]" 128 129What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio 130KernelVersion: 2.6.38 131Contact: linux-iio@vger.kernel.org 132Description: 133 Hardware dependent ADC oversampling. Controls the sampling ratio 134 of the digital filter if available. 135 136What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available 137KernelVersion: 2.6.38 138Contact: linux-iio@vger.kernel.org 139Description: 140 Hardware dependent values supported by the oversampling filter. 141 142What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw 143What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw 144KernelVersion: 2.6.35 145Contact: linux-iio@vger.kernel.org 146Description: 147 Raw (unscaled no bias removal etc.) voltage measurement from 148 channel Y. In special cases where the channel does not 149 correspond to externally available input one of the named 150 versions may be used. The number must always be specified and 151 unique to allow association with event codes. Units after 152 application of scale and offset are millivolts. 153 154 Channels with 'i' and 'q' modifiers always exist in pairs and both 155 channels refer to the same signal. The 'i' channel contains the in-phase 156 component of the signal while the 'q' channel contains the quadrature 157 component. 158 159What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw 160KernelVersion: 2.6.35 161Contact: linux-iio@vger.kernel.org 162Description: 163 Raw (unscaled) differential voltage measurement equivalent to 164 channel Y - channel Z where these channel numbers apply to the 165 physically equivalent inputs when non differential readings are 166 separately available. In differential only parts, then all that 167 is required is a consistent labeling. Units after application 168 of scale and offset are millivolts. 169 170What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_rms_raw 171KernelVersion: 6.18 172Contact: linux-iio@vger.kernel.org 173Description: 174 Raw (unscaled) Root Mean Square (RMS) voltage measurement from 175 channel Y. Units after application of scale and offset are 176 millivolts. 177 178What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw 179What: /sys/bus/iio/devices/iio:deviceX/in_powerY_active_raw 180What: /sys/bus/iio/devices/iio:deviceX/in_powerY_reactive_raw 181What: /sys/bus/iio/devices/iio:deviceX/in_powerY_apparent_raw 182KernelVersion: 4.5 183Contact: linux-iio@vger.kernel.org 184Description: 185 Raw (unscaled no bias removal etc.) power measurement from 186 channel Y. The number must always be specified and 187 unique to allow association with event codes. Units after 188 application of scale and offset are milliwatts. 189 190What: /sys/bus/iio/devices/iio:deviceX/in_powerY_powerfactor 191KernelVersion: 6.18 192Contact: linux-iio@vger.kernel.org 193Description: 194 Power factor measurement from channel Y. Power factor is the 195 ratio of active power to apparent power. The value is unitless. 196 197What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw 198KernelVersion: 3.2 199Contact: linux-iio@vger.kernel.org 200Description: 201 Raw capacitance measurement from channel Y. Units after 202 application of scale and offset are nanofarads. 203 204What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw 205KernelVersion: 3.2 206Contact: linux-iio@vger.kernel.org 207Description: 208 Raw differential capacitance measurement equivalent to 209 channel Y - channel Z where these channel numbers apply to the 210 physically equivalent inputs when non differential readings are 211 separately available. In differential only parts, then all that 212 is required is a consistent labeling. Units after application 213 of scale and offset are nanofarads. 214 215What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint 216KernelVersion: 6.1 217Contact: linux-iio@vger.kernel.org 218Description: 219 For differential channels, this an offset that is applied 220 equally to both inputs. As the reading is of the difference 221 between the two inputs, this should not be applied to the _raw 222 reading by userspace (unlike _offset) and unlike calibbias 223 it does not affect the differential value measured because 224 the effect of _zeropoint cancels out across the two inputs 225 that make up the differential pair. It's purpose is to bring 226 the individual signals, before the differential is measured, 227 within the measurement range of the device. The naming is 228 chosen because if the separate inputs that make the 229 differential pair are drawn on a graph in their 230 _raw units, this is the value that the zero point on the 231 measurement axis represents. It is expressed with the 232 same scaling as _raw. 233 234What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw 235What: /sys/bus/iio/devices/iio:deviceX/in_tempY_raw 236What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw 237What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw 238What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw 239What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw 240KernelVersion: 2.6.35 241Contact: linux-iio@vger.kernel.org 242Description: 243 Raw (unscaled no bias removal etc.) temperature measurement. 244 If an axis is specified it generally means that the temperature 245 sensor is associated with one part of a compound device (e.g. 246 a gyroscope axis). The ambient and object modifiers distinguish 247 between ambient (reference) and distant temperature for contact- 248 less measurements. Units after application of scale and offset 249 are milli degrees Celsius. 250 251What: /sys/bus/iio/devices/iio:deviceX/in_tempY_input 252What: /sys/bus/iio/devices/iio:deviceX/in_temp_input 253KernelVersion: 2.6.38 254Contact: linux-iio@vger.kernel.org 255Description: 256 Scaled temperature measurement in milli degrees Celsius. 257 258What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw 259What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw 260What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw 261KernelVersion: 2.6.35 262Contact: linux-iio@vger.kernel.org 263Description: 264 Acceleration in direction x, y or z (may be arbitrarily assigned 265 but should match other such assignments on device). 266 Has all of the equivalent parameters as per voltageY. Units 267 after application of scale and offset are m/s^2. 268 269What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw 270What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw 271What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw 272KernelVersion: 6.1 273Contact: linux-iio@vger.kernel.org 274Description: 275 As per in_accel_X_raw attributes, but minus the 276 acceleration due to gravity. 277 278What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw 279What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw 280What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw 281KernelVersion: 4.11 282Contact: linux-iio@vger.kernel.org 283Description: 284 Gravity in direction x, y or z (may be arbitrarily assigned 285 but should match other such assignments on device). 286 Units after application of scale and offset are m/s^2. 287 288What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw 289What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw 290What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw 291KernelVersion: 6.5 292Contact: linux-iio@vger.kernel.org 293Description: 294 Angular displacement between two consecutive samples on x, y or 295 z (may be arbitrarily assigned but should match other such 296 assignments on device). 297 In order to compute the total angular displacement during a 298 desired period of time, the application should sum-up the delta 299 angle samples acquired during that time. 300 Units after application of scale and offset are radians. 301 302What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw 303What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw 304What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw 305KernelVersion: 6.5 306Contact: linux-iio@vger.kernel.org 307Description: 308 The linear velocity change between two consecutive samples on x, 309 y or z (may be arbitrarily assigned but should match other such 310 assignments on device). 311 In order to compute the total linear velocity change during a 312 desired period of time, the application should sum-up the delta 313 velocity samples acquired during that time. 314 Units after application of scale and offset are meters per 315 second. 316 317What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw 318What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw 319KernelVersion: 4.17 320Contact: linux-iio@vger.kernel.org 321Description: 322 Angle of rotation. Units after application of scale and offset 323 are radians. 324 325What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw 326What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw 327KernelVersion: 4.19 328Contact: linux-iio@vger.kernel.org 329Description: 330 Relative position in direction x or y on a pad (may be 331 arbitrarily assigned but should match other such assignments on 332 device). 333 Units after application of scale and offset are milli percents 334 from the pad's size in both directions. Should be calibrated by 335 the consumer. 336 337What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw 338What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw 339What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw 340KernelVersion: 2.6.35 341Contact: linux-iio@vger.kernel.org 342Description: 343 Angular velocity about axis x, y or z (may be arbitrarily 344 assigned). Has all the equivalent parameters as per voltageY. 345 Units after application of scale and offset are radians per 346 second. 347 348What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw 349What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw 350What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw 351KernelVersion: 2.6.35 352Contact: linux-iio@vger.kernel.org 353Description: 354 Inclination raw reading about axis x, y or z (may be 355 arbitrarily assigned). Data converted by application of offset 356 and scale to degrees. 357 358What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw 359What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw 360What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw 361KernelVersion: 2.6.35 362Contact: linux-iio@vger.kernel.org 363Description: 364 Magnetic field along axis x, y or z (may be arbitrarily 365 assigned). Data converted by application of offset 366 then scale to Gauss. 367 368What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw 369What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw 370What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw 371What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw 372What: /sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw 373KernelVersion: 2.6.36 374Contact: linux-iio@vger.kernel.org 375Description: 376 Highest value since some reset condition. These 377 attributes allow access to this and are otherwise 378 the direct equivalent of the <type>Y[_name]_raw attributes. 379 380What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw 381What: /sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw 382KernelVersion: 6.7 383Contact: linux-iio@vger.kernel.org 384Description: 385 Lowest value since some reset condition. These 386 attributes allow access to this and are otherwise 387 the direct equivalent of the <type>Y[_name]_raw attributes. 388 389What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw 390KernelVersion: 2.6.36 391Contact: linux-iio@vger.kernel.org 392Description: 393 A computed peak value based on the sum squared magnitude of 394 the underlying value in the specified directions. 395 396What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw 397What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw 398KernelVersion: 3.8 399Contact: linux-iio@vger.kernel.org 400Description: 401 Raw pressure measurement from channel Y. Units after 402 application of scale and offset are kilopascal. 403 404What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input 405What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input 406KernelVersion: 3.8 407Contact: linux-iio@vger.kernel.org 408Description: 409 Scaled pressure measurement from channel Y, in kilopascal. 410 411What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw 412KernelVersion: 3.14 413Contact: linux-iio@vger.kernel.org 414Description: 415 Raw humidity measurement of air. Units after application of 416 scale and offset are milli percent. 417 418What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input 419KernelVersion: 3.14 420Contact: linux-iio@vger.kernel.org 421Description: 422 Scaled humidity measurement in milli percent. 423 424What: /sys/bus/iio/devices/iio:deviceX/in_Y_mean_raw 425KernelVersion: 3.5 426Contact: linux-iio@vger.kernel.org 427Description: 428 Averaged raw measurement from channel Y. The number of values 429 used for averaging is device specific. The converting rules for 430 normal raw values also applies to the averaged raw values. 431 432What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset 433What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset 434What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset 435What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset 436What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_q_offset 437What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_i_offset 438What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset 439What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset 440What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset 441What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset 442What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset 443What: /sys/bus/iio/devices/iio:deviceX/in_current_offset 444What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset 445What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset 446What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset 447What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset 448What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset 449What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset 450What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset 451What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset 452What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_offset 453KernelVersion: 2.6.35 454Contact: linux-iio@vger.kernel.org 455Description: 456 If known for a device, offset to be added to <type>[Y]_raw prior 457 to scaling by <type>[Y]_scale in order to obtain value in the 458 <type> units as specified in <type>[Y]_raw documentation. 459 Not present if the offset is always 0 or unknown. If Y or 460 axis <x|y|z> is not present, then the offset applies to all 461 in channels of <type>. 462 May be writable if a variable offset can be applied on the 463 device. Note that this is different to calibbias which 464 is for devices (or drivers) that apply offsets to compensate 465 for variation between different instances of the part, typically 466 adjusted by using some hardware supported calibration procedure. 467 Calibbias is applied internally, offset is applied in userspace 468 to the _raw output. 469 470What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale 471What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale 472What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale 473What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale 474What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale 475What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale 476What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale 477What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale 478What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale 479What: /sys/bus/iio/devices/iio:deviceX/in_current_scale 480What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale 481What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale 482What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale 483What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale 484What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale 485What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale 486What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale 487What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale 488What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale 489What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale 490What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale 491What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale 492What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale 493What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale 494What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale 495What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale 496What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale 497What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale 498What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale 499What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale 500What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale 501What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale 502What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale 503What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale 504What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale 505What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale 506What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_scale 507What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_scale 508What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_scale 509What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale 510KernelVersion: 2.6.35 511Contact: linux-iio@vger.kernel.org 512Description: 513 If known for a device, scale to be applied to <type>Y[_name]_raw 514 post addition of <type>[Y][_name]_offset in order to obtain the 515 measured value in <type> units as specified in 516 <type>[Y][_name]_raw documentation. If shared across all in 517 channels then Y and <x|y|z> are not present and the value is 518 called <type>[Y][_name]_scale. The peak modifier means this 519 value is applied to <type>Y[_name]_peak_raw values. 520 521What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias 522What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias 523What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias 524What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_calibbias 525What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_calibbias 526What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias 527What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias 528What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias 529What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibbias 530What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibbias 531What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias 532What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibbias 533What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibbias 534What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibbias 535What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibbias 536What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias 537What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias 538What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias 539What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias 540What: /sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias 541What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias 542What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias 543What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias 544What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias 545KernelVersion: 2.6.35 546Contact: linux-iio@vger.kernel.org 547Description: 548 Hardware applied calibration offset (assumed to fix production 549 inaccuracies). 550 icm42600: For this device values are real physical offsets 551 expressed in SI units (m/s^2 for accelerometers and rad/s 552 for gyroscope)/ 553 554What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available 555What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available 556What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available 557What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available 558What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias_available 559What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available 560KernelVersion: 5.8 561Contact: linux-iio@vger.kernel.org 562Description: 563 Available values of calibbias. Maybe expressed as either of: 564 565 - a small discrete set of values like "0 2 4 6 8" 566 - a range specified as "[min step max]" 567 568What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay 569KernelVersion: 6.17 570Contact: linux-iio@vger.kernel.org 571Description: 572 Delay of start of conversion from common reference point shared 573 by all channels. Can be writable when used to compensate for 574 delay variation introduced by external filters feeding a 575 simultaneous sampling ADC. 576 577 E.g., for the ad7606 ADC series, this value is intended as a 578 configurable time delay in seconds, to correct delay introduced 579 by an optional external filtering circuit. 580 581What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available 582KernelVersion: 6.16 583Contact: linux-iio@vger.kernel.org 584Description: 585 Available values of convdelay. Maybe expressed as: 586 587 - a range specified as "[min step max]" 588 589 If shared across all channels, <type>_convdelay_available 590 is used. 591 592What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale 593What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale 594What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale 595What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale 596What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale 597What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale 598What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale 599What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibscale 600What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale 601What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale 602What: /sys/bus/iio/devices/iio:deviceX/in_intensity_both_calibscale 603What: /sys/bus/iio/devices/iio:deviceX/in_intensity_calibscale 604What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_calibscale 605What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibscale 606What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibscale 607What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibscale 608What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale 609What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale 610What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale 611What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale 612What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale 613What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale 614What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale 615What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale 616KernelVersion: 2.6.35 617Contact: linux-iio@vger.kernel.org 618Description: 619 Hardware applied calibration scale factor (assumed to fix 620 production inaccuracies). If shared across all channels, 621 <type>_calibscale is used. 622 623What: /sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available 624What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available 625What: /sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available 626What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale_available 627KernelVersion: 4.8 628Contact: linux-iio@vger.kernel.org 629Description: 630 Available values of calibscale. Maybe expressed as either of: 631 632 - a small discrete set of values like "1 8 16" 633 - a range specified as "[min step max]" 634 635 If shared across all channels, <type>_calibscale_available is used. 636 637What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender 638What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender 639What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender 640What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender 641KernelVersion: 4.0 642Contact: linux-iio@vger.kernel.org 643Description: 644 Gender of the user (e.g.: male, female) used by some pedometers 645 to compute the stride length, distance, speed and activity 646 type. 647 648What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available 649What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available 650What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available 651What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available 652KernelVersion: 4.0 653Contact: linux-iio@vger.kernel.org 654Description: 655 Lists all available gender values (e.g.: male, female). 656 657What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight 658What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight 659What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight 660What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight 661KernelVersion: 3.19 662Contact: linux-iio@vger.kernel.org 663Description: 664 Height of the user (in meters) used by some pedometers 665 to compute the stride length, distance, speed and activity 666 type. 667 668What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight 669KernelVersion: 4.0 670Contact: linux-iio@vger.kernel.org 671Description: 672 Weight of the user (in kg). It is needed by some pedometers 673 to compute the calories burnt by the user. 674 675What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available 676What: /sys/.../iio:deviceX/in_anglvel_scale_available 677What: /sys/.../iio:deviceX/in_magn_scale_available 678What: /sys/.../iio:deviceX/in_illuminance_scale_available 679What: /sys/.../iio:deviceX/in_intensity_scale_available 680What: /sys/.../iio:deviceX/in_proximity_scale_available 681What: /sys/.../iio:deviceX/in_voltageY_scale_available 682What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available 683What: /sys/.../iio:deviceX/out_voltageY_scale_available 684What: /sys/.../iio:deviceX/out_altvoltageY_scale_available 685What: /sys/.../iio:deviceX/in_capacitance_scale_available 686What: /sys/.../iio:deviceX/in_pressure_scale_available 687What: /sys/.../iio:deviceX/in_pressureY_scale_available 688KernelVersion: 2.6.35 689Contact: linux-iio@vger.kernel.org 690Description: 691 If a discrete set of scale values is available, they 692 are listed in this attribute. Unlike illumination, 693 multiplying intensity by intensity_scale does not 694 yield value with any standardized unit. 695 696What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain 697What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain 698What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain 699What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain 700What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain 701What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain 702What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hardwaregain 703KernelVersion: 2.6.35 704Contact: linux-iio@vger.kernel.org 705Description: 706 Hardware applied gain factor. If shared across all channels, 707 <type>_hardwaregain is used. 708 709What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available 710KernelVersion: 5.10 711Contact: linux-iio@vger.kernel.org 712Description: 713 Lists all available hardware applied gain factors. Shared across all 714 channels. 715 716What: /sys/.../in_accel_filter_low_pass_3db_frequency 717What: /sys/.../in_magn_filter_low_pass_3db_frequency 718What: /sys/.../in_anglvel_filter_low_pass_3db_frequency 719KernelVersion: 3.2 720Contact: linux-iio@vger.kernel.org 721Description: 722 If a known or controllable low pass filter is applied 723 to the underlying data channel, then this parameter 724 gives the 3dB frequency of the filter in Hz. 725 726What: /sys/.../in_accel_filter_high_pass_3db_frequency 727What: /sys/.../in_anglvel_filter_high_pass_3db_frequency 728What: /sys/.../in_magn_filter_high_pass_3db_frequency 729KernelVersion: 4.2 730Contact: linux-iio@vger.kernel.org 731Description: 732 If a known or controllable high pass filter is applied 733 to the underlying data channel, then this parameter 734 gives the 3dB frequency of the filter in Hz. 735 736What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw 737What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw 738KernelVersion: 2.6.37 739Contact: linux-iio@vger.kernel.org 740Description: 741 Raw (unscaled, no bias etc.) output voltage for 742 channel Y. The number must always be specified and 743 unique if the output corresponds to a single channel. 744 While DAC like devices typically use out_voltage, 745 a continuous frequency generating device, such as 746 a DDS or PLL should use out_altvoltage. 747 748What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw 749What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw 750KernelVersion: 2.6.37 751Contact: linux-iio@vger.kernel.org 752Description: 753 Raw (unscaled, no bias etc.) output voltage for an aggregate of 754 channel Y, channel Z, etc. This interface is available in cases 755 where a single output sets the value for multiple channels 756 simultaneously. 757 758What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode 759What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode 760What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode 761What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode 762KernelVersion: 2.6.38 763Contact: linux-iio@vger.kernel.org 764Description: 765 Specifies the output powerdown mode. 766 DAC output stage is disconnected from the amplifier and 767 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 768 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 769 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 770 7.7kohm_to_gnd: connected to ground via a 7.7kOhm resistor, 771 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 772 32kohm_to_gnd: connected to ground via a 32kOhm resistor, 773 42kohm_to_gnd: connected to ground via a 42kOhm resistor, 774 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 775 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 776 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 777 500kohm_to_gnd: connected to ground via a 500kOhm resistor, 778 640kohm_to_gnd: connected to ground via a 640kOhm resistor, 779 three_state: left floating. 780 For a list of available output power down options read 781 outX_powerdown_mode_available. If Y is not present the 782 mode is shared across all outputs. 783 784What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available 785What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available 786What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available 787What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available 788KernelVersion: 2.6.38 789Contact: linux-iio@vger.kernel.org 790Description: 791 Lists all available output power down modes. 792 If Y is not present the mode is shared across all outputs. 793 794What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown 795What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown 796What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown 797What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown 798KernelVersion: 2.6.38 799Contact: linux-iio@vger.kernel.org 800Description: 801 Writing 1 causes output Y to enter the power down mode specified 802 by the corresponding outY_powerdown_mode. DAC output stage is 803 disconnected from the amplifier. Clearing returns to normal 804 operation. Y may be suppressed if all outputs are controlled 805 together. 806 807What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency 808KernelVersion: 3.4.0 809Contact: linux-iio@vger.kernel.org 810Description: 811 Output frequency for channel Y in Hz. The number must always be 812 specified and unique if the output corresponds to a single 813 channel. 814 Some drivers have additional constraints: 815 ADF4371 has an integrated VCO with fundamendal output 816 frequency ranging from 4000000000 Hz 8000000000 Hz. 817 818 out_altvoltage0_frequency: 819 A divide by 1, 2, 4, 8, 16, 32 or circuit generates 820 frequencies from 62500000 Hz to 8000000000 Hz. 821 out_altvoltage1_frequency: 822 This channel duplicates the channel 0 frequency 823 out_altvoltage2_frequency: 824 A frequency doubler generates frequencies from 825 8000000000 Hz to 16000000000 Hz. 826 out_altvoltage3_frequency: 827 A frequency quadrupler generates frequencies from 828 16000000000 Hz to 32000000000 Hz. 829 830 Note: writes to one of the channels will affect the frequency of 831 all the other channels, since it involves changing the VCO 832 fundamental output frequency. 833 834What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_phase 835What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_phase 836What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase 837What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_i_phase 838What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_q_phase 839KernelVersion: 3.4.0 840Contact: linux-iio@vger.kernel.org 841Description: 842 Phase in radians of one frequency/clock output Y 843 (out_altvoltageY) relative to another frequency/clock output 844 (out_altvoltageZ) of the device X. The number must always be 845 specified and unique if the output corresponds to a single 846 channel. 847 848What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw 849Date: May 2012 850KernelVersion: 3.5 851Contact: Johan Hovold <jhovold@gmail.com> 852Description: 853 Set/get output current for channel Y. Units after application 854 of scale and offset are milliamps. 855 For some devices current channels are used to specify 856 current supplied to elements used in taking a measurement 857 of a different type. E.g. LED currents. 858 859What: /sys/bus/iio/devices/iio:deviceX/events 860KernelVersion: 2.6.35 861Contact: linux-iio@vger.kernel.org 862Description: 863 Configuration of which hardware generated events are passed up 864 to user-space. 865 866What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en 867What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en 868What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en 869What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en 870What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en 871What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en 872What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en 873What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en 874What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en 875What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en 876What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en 877What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en 878What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en 879What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en 880What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en 881What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en 882What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en 883What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en 884What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en 885What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en 886What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en 887What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en 888What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en 889What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en 890What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en 891What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en 892What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en 893What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en 894What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en 895What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en 896What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en 897What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en 898What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en 899What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en 900What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en 901What: /sys/.../iio:deviceX/events/in_pressure_thresh_rising_en 902KernelVersion: 2.6.37 903Contact: linux-iio@vger.kernel.org 904Description: 905 Event generated when channel passes a threshold in the specified 906 (_rising|_falling) direction. If the direction is not specified, 907 then either the device will report an event which ever direction 908 a single threshold value is passed in (e.g. 909 <type>[Y][_name]_<raw|input>_thresh_value) or 910 <type>[Y][_name]_<raw|input>_thresh_rising_value and 911 <type>[Y][_name]_<raw|input>_thresh_falling_value may take 912 different values, but the device can only enable both thresholds 913 or neither. 914 915 Note the driver will assume the last p events requested are 916 to be enabled where p is how many it supports (which may vary 917 depending on the exact set requested. So if you want to be 918 sure you have set what you think you have, check the contents of 919 these attributes after everything is configured. Drivers may 920 have to buffer any parameters so that they are consistent when 921 a given event type is enabled at a future point (and not those for 922 whatever event was previously enabled). 923 924What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en 925What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en 926What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en 927What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en 928What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en 929What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en 930What: /sys/.../iio:deviceX/events/in_accel_x&y&z_roc_rising_en 931What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en 932What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en 933What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en 934What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en 935What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en 936What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en 937What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en 938What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en 939What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en 940What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en 941What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en 942What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en 943What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en 944What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en 945What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en 946What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en 947What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en 948What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en 949What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en 950What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en 951What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en 952What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en 953What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en 954What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en 955What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en 956What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en 957KernelVersion: 2.6.37 958Contact: linux-iio@vger.kernel.org 959Description: 960 Event generated when channel passes a threshold on the rate of 961 change (1st differential) in the specified (_rising|_falling) 962 direction. If the direction is not specified, then either the 963 device will report an event which ever direction a single 964 threshold value is passed in (e.g. 965 <type>[Y][_name]_<raw|input>_roc_value) or 966 <type>[Y][_name]_<raw|input>_roc_rising_value and 967 <type>[Y][_name]_<raw|input>_roc_falling_value may take 968 different values, but the device can only enable both rate of 969 change thresholds or neither. 970 971 Note the driver will assume the last p events requested are 972 to be enabled where p is however many it supports (which may 973 vary depending on the exact set requested. So if you want to be 974 sure you have set what you think you have, check the contents of 975 these attributes after everything is configured. Drivers may 976 have to buffer any parameters so that they are consistent when 977 a given event type is enabled a future point (and not those for 978 whatever event was previously enabled). 979 980What: /sys/.../events/in_capacitanceY_adaptive_thresh_rising_en 981What: /sys/.../events/in_capacitanceY_adaptive_thresh_falling_en 982KernelVersion: 5.13 983Contact: linux-iio@vger.kernel.org 984Description: 985 Adaptive thresholds are similar to normal fixed thresholds 986 but the value is expressed as an offset from a value which 987 provides a low frequency approximation of the channel itself. 988 Thus these detect if a rapid change occurs in the specified 989 direction which crosses tracking value + offset. 990 Tracking value calculation is devices specific. 991 992What: /sys/.../in_capacitanceY_adaptive_thresh_rising_timeout 993What: /sys/.../in_capacitanceY_adaptive_thresh_falling_timeout 994KernelVersion: 5.11 995Contact: linux-iio@vger.kernel.org 996Description: 997 When adaptive thresholds are used, the tracking signal 998 may adjust too slowly to step changes in the raw signal. 999 Thus these specify the time in seconds for which the 1000 difference between the slow tracking signal and the raw 1001 signal is allowed to remain out-of-range before a reset 1002 event occurs in which the tracking signal is made equal 1003 to the raw signal, allowing slow tracking to resume and the 1004 adaptive threshold event detection to function as expected. 1005 1006What: /sys/.../events/in_accel_mag_adaptive_rising_value 1007What: /sys/.../events/in_accel_thresh_rising_value 1008What: /sys/.../events/in_accel_thresh_falling_value 1009What: /sys/.../events/in_accel_x_raw_thresh_rising_value 1010What: /sys/.../events/in_accel_x_raw_thresh_falling_value 1011What: /sys/.../events/in_accel_y_raw_thresh_rising_value 1012What: /sys/.../events/in_accel_y_raw_thresh_falling_value 1013What: /sys/.../events/in_accel_z_raw_thresh_rising_value 1014What: /sys/.../events/in_accel_z_raw_thresh_falling_value 1015What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value 1016What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value 1017What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value 1018What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value 1019What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value 1020What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value 1021What: /sys/.../events/in_magn_x_raw_thresh_rising_value 1022What: /sys/.../events/in_magn_x_raw_thresh_falling_value 1023What: /sys/.../events/in_magn_y_raw_thresh_rising_value 1024What: /sys/.../events/in_magn_y_raw_thresh_falling_value 1025What: /sys/.../events/in_magn_z_raw_thresh_rising_value 1026What: /sys/.../events/in_magn_z_raw_thresh_falling_value 1027What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value 1028What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value 1029What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value 1030What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value 1031What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value 1032What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value 1033What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value 1034What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value 1035What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value 1036What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value 1037What: /sys/.../events/in_voltageY_raw_thresh_rising_value 1038What: /sys/.../events/in_voltageY_raw_thresh_falling_value 1039What: /sys/.../events/in_tempY_raw_thresh_rising_value 1040What: /sys/.../events/in_tempY_raw_thresh_falling_value 1041What: /sys/.../events/in_illuminance0_thresh_falling_value 1042What: /sys/.../events/in_illuminance0_thresh_rising_value 1043What: /sys/.../events/in_proximity0_thresh_falling_value 1044What: /sys/.../events/in_proximity0_thresh_rising_value 1045What: /sys/.../events/in_illuminance_thresh_rising_value 1046What: /sys/.../events/in_illuminance_thresh_falling_value 1047What: /sys/.../events/in_capacitanceY_thresh_rising_value 1048What: /sys/.../events/in_capacitanceY_thresh_falling_value 1049What: /sys/.../events/in_capacitanceY_thresh_adaptive_rising_value 1050What: /sys/.../events/in_capacitanceY_thresh_falling_rising_value 1051What: /sys/.../events/in_pressure_thresh_rising_value 1052KernelVersion: 2.6.37 1053Contact: linux-iio@vger.kernel.org 1054Description: 1055 Specifies the value of threshold that the device is comparing 1056 against for the events enabled by 1057 <type>Y[_name]_thresh[_rising|falling]_en. 1058 1059 If separate attributes exist for the two directions, but 1060 direction is not specified for this attribute, then a single 1061 threshold value applies to both directions. 1062 1063 The raw or input element of the name indicates whether the 1064 value is in raw device units or in processed units (as _raw 1065 and _input do on sysfs direct channel read attributes). 1066 1067What: /sys/.../events/in_accel_scale 1068What: /sys/.../events/in_accel_peak_scale 1069What: /sys/.../events/in_anglvel_scale 1070What: /sys/.../events/in_magn_scale 1071What: /sys/.../events/in_rot_from_north_magnetic_scale 1072What: /sys/.../events/in_rot_from_north_true_scale 1073What: /sys/.../events/in_voltage_scale 1074What: /sys/.../events/in_voltage_supply_scale 1075What: /sys/.../events/in_temp_scale 1076What: /sys/.../events/in_illuminance_scale 1077What: /sys/.../events/in_proximity_scale 1078KernelVersion: 3.21 1079Contact: linux-iio@vger.kernel.org 1080Description: 1081 Specifies the conversion factor from the standard units 1082 to device specific units used to set the event trigger 1083 threshold. 1084 1085What: /sys/.../events/in_accel_x_thresh_rising_hysteresis 1086What: /sys/.../events/in_accel_x_thresh_falling_hysteresis 1087What: /sys/.../events/in_accel_x_thresh_either_hysteresis 1088What: /sys/.../events/in_accel_y_thresh_rising_hysteresis 1089What: /sys/.../events/in_accel_y_thresh_falling_hysteresis 1090What: /sys/.../events/in_accel_y_thresh_either_hysteresis 1091What: /sys/.../events/in_accel_z_thresh_rising_hysteresis 1092What: /sys/.../events/in_accel_z_thresh_falling_hysteresis 1093What: /sys/.../events/in_accel_z_thresh_either_hysteresis 1094What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis 1095What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis 1096What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis 1097What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis 1098What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis 1099What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis 1100What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis 1101What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis 1102What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis 1103What: /sys/.../events/in_magn_x_thresh_rising_hysteresis 1104What: /sys/.../events/in_magn_x_thresh_falling_hysteresis 1105What: /sys/.../events/in_magn_x_thresh_either_hysteresis 1106What: /sys/.../events/in_magn_y_thresh_rising_hysteresis 1107What: /sys/.../events/in_magn_y_thresh_falling_hysteresis 1108What: /sys/.../events/in_magn_y_thresh_either_hysteresis 1109What: /sys/.../events/in_magn_z_thresh_rising_hysteresis 1110What: /sys/.../events/in_magn_z_thresh_falling_hysteresis 1111What: /sys/.../events/in_magn_z_thresh_either_hysteresis 1112What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis 1113What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis 1114What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis 1115What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis 1116What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis 1117What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis 1118What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis 1119What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis 1120What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis 1121What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis 1122What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis 1123What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis 1124What: /sys/.../events/in_voltageY_thresh_rising_hysteresis 1125What: /sys/.../events/in_voltageY_thresh_falling_hysteresis 1126What: /sys/.../events/in_voltageY_thresh_either_hysteresis 1127What: /sys/.../events/in_tempY_thresh_rising_hysteresis 1128What: /sys/.../events/in_tempY_thresh_falling_hysteresis 1129What: /sys/.../events/in_tempY_thresh_either_hysteresis 1130What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis 1131What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis 1132What: /sys/.../events/in_illuminance0_thresh_either_hysteresis 1133What: /sys/.../events/in_proximity0_thresh_falling_hysteresis 1134What: /sys/.../events/in_proximity0_thresh_rising_hysteresis 1135What: /sys/.../events/in_proximity0_thresh_either_hysteresis 1136KernelVersion: 3.13 1137Contact: linux-iio@vger.kernel.org 1138Description: 1139 Specifies the hysteresis of threshold that the device is comparing 1140 against for the events enabled by 1141 <type>Y[_name]_thresh[_(rising|falling)]_hysteresis. 1142 If separate attributes exist for the two directions, but 1143 direction is not specified for this attribute, then a single 1144 hysteresis value applies to both directions. 1145 1146 For falling events the hysteresis is added to the _value attribute for 1147 this event to get the upper threshold for when the event goes back to 1148 normal, for rising events the hysteresis is subtracted from the _value 1149 attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 1150 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event 1151 will get activated once in_voltage0_raw goes above 1200 and will become 1152 deactivated again once the value falls below 1150. 1153 1154What: /sys/.../events/in_accel_roc_rising_value 1155What: /sys/.../events/in_accel_x_raw_roc_rising_value 1156What: /sys/.../events/in_accel_x_raw_roc_falling_value 1157What: /sys/.../events/in_accel_y_raw_roc_rising_value 1158What: /sys/.../events/in_accel_y_raw_roc_falling_value 1159What: /sys/.../events/in_accel_z_raw_roc_rising_value 1160What: /sys/.../events/in_accel_z_raw_roc_falling_value 1161What: /sys/.../events/in_anglvel_x_raw_roc_rising_value 1162What: /sys/.../events/in_anglvel_x_raw_roc_falling_value 1163What: /sys/.../events/in_anglvel_y_raw_roc_rising_value 1164What: /sys/.../events/in_anglvel_y_raw_roc_falling_value 1165What: /sys/.../events/in_anglvel_z_raw_roc_rising_value 1166What: /sys/.../events/in_anglvel_z_raw_roc_falling_value 1167What: /sys/.../events/in_magn_x_raw_roc_rising_value 1168What: /sys/.../events/in_magn_x_raw_roc_falling_value 1169What: /sys/.../events/in_magn_y_raw_roc_rising_value 1170What: /sys/.../events/in_magn_y_raw_roc_falling_value 1171What: /sys/.../events/in_magn_z_raw_roc_rising_value 1172What: /sys/.../events/in_magn_z_raw_roc_falling_value 1173What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value 1174What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value 1175What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value 1176What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value 1177What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value 1178What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value 1179What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value 1180What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value 1181What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value 1182What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value 1183What: /sys/.../events/in_voltageY_raw_roc_rising_value 1184What: /sys/.../events/in_voltageY_raw_roc_falling_value 1185What: /sys/.../events/in_tempY_raw_roc_rising_value 1186What: /sys/.../events/in_tempY_raw_roc_falling_value 1187KernelVersion: 2.6.37 1188Contact: linux-iio@vger.kernel.org 1189Description: 1190 Specifies the value of rate of change threshold that the 1191 device is comparing against for the events enabled by 1192 <type>[Y][_name]_roc[_rising|falling]_en. 1193 1194 If separate attributes exist for the two directions, 1195 but direction is not specified for this attribute, 1196 then a single threshold value applies to both directions. 1197 The raw or input element of the name indicates whether the 1198 value is in raw device units or in processed units (as _raw 1199 and _input do on sysfs direct channel read attributes). 1200 1201What: /sys/.../events/in_accel_mag_adaptive_rising_period 1202What: /sys/.../events/in_accel_roc_rising_period 1203What: /sys/.../events/in_accel_x_thresh_rising_period 1204What: /sys/.../events/in_accel_x_thresh_falling_period 1205What: /sys/.../events/in_accel_x_roc_rising_period 1206What: /sys/.../events/in_accel_x_roc_falling_period 1207What: /sys/.../events/in_accel_y_thresh_rising_period 1208What: /sys/.../events/in_accel_y_thresh_falling_period 1209What: /sys/.../events/in_accel_y_roc_rising_period 1210What: /sys/.../events/in_accel_y_roc_falling_period 1211What: /sys/.../events/in_accel_z_thresh_rising_period 1212What: /sys/.../events/in_accel_z_thresh_falling_period 1213What: /sys/.../events/in_accel_z_roc_rising_period 1214What: /sys/.../events/in_accel_z_roc_falling_period 1215What: /sys/.../events/in_anglvel_x_thresh_rising_period 1216What: /sys/.../events/in_anglvel_x_thresh_falling_period 1217What: /sys/.../events/in_anglvel_x_roc_rising_period 1218What: /sys/.../events/in_anglvel_x_roc_falling_period 1219What: /sys/.../events/in_anglvel_y_thresh_rising_period 1220What: /sys/.../events/in_anglvel_y_thresh_falling_period 1221What: /sys/.../events/in_anglvel_y_roc_rising_period 1222What: /sys/.../events/in_anglvel_y_roc_falling_period 1223What: /sys/.../events/in_anglvel_z_thresh_rising_period 1224What: /sys/.../events/in_anglvel_z_thresh_falling_period 1225What: /sys/.../events/in_anglvel_z_roc_rising_period 1226What: /sys/.../events/in_anglvel_z_roc_falling_period 1227What: /sys/.../events/in_magn_x_thresh_rising_period 1228What: /sys/.../events/in_magn_x_thresh_falling_period 1229What: /sys/.../events/in_magn_x_roc_rising_period 1230What: /sys/.../events/in_magn_x_roc_falling_period 1231What: /sys/.../events/in_magn_y_thresh_rising_period 1232What: /sys/.../events/in_magn_y_thresh_falling_period 1233What: /sys/.../events/in_magn_y_roc_rising_period 1234What: /sys/.../events/in_magn_y_roc_falling_period 1235What: /sys/.../events/in_magn_z_thresh_rising_period 1236What: /sys/.../events/in_magn_z_thresh_falling_period 1237What: /sys/.../events/in_magn_z_roc_rising_period 1238What: /sys/.../events/in_magn_z_roc_falling_period 1239What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period 1240What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period 1241What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period 1242What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period 1243What: /sys/.../events/in_rot_from_north_true_thresh_rising_period 1244What: /sys/.../events/in_rot_from_north_true_thresh_falling_period 1245What: /sys/.../events/in_rot_from_north_true_roc_rising_period 1246What: /sys/.../events/in_rot_from_north_true_roc_falling_period 1247What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period 1248What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period 1249What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period 1250What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period 1251What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period 1252What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period 1253What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period 1254What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period 1255What: /sys/.../events/in_voltageY_supply_thresh_rising_period 1256What: /sys/.../events/in_voltageY_supply_thresh_falling_period 1257What: /sys/.../events/in_voltageY_supply_roc_rising_period 1258What: /sys/.../events/in_voltageY_supply_roc_falling_period 1259What: /sys/.../events/in_voltageY_thresh_rising_period 1260What: /sys/.../events/in_voltageY_thresh_falling_period 1261What: /sys/.../events/in_voltageY_roc_rising_period 1262What: /sys/.../events/in_voltageY_roc_falling_period 1263What: /sys/.../events/in_tempY_thresh_rising_period 1264What: /sys/.../events/in_tempY_thresh_falling_period 1265What: /sys/.../events/in_tempY_roc_rising_period 1266What: /sys/.../events/in_tempY_roc_falling_period 1267What: /sys/.../events/in_accel_x&y&z_mag_falling_period 1268What: /sys/.../events/in_intensity0_thresh_period 1269What: /sys/.../events/in_proximity0_thresh_period 1270What: /sys/.../events/in_activity_still_thresh_rising_period 1271What: /sys/.../events/in_activity_still_thresh_falling_period 1272What: /sys/.../events/in_activity_walking_thresh_rising_period 1273What: /sys/.../events/in_activity_walking_thresh_falling_period 1274What: /sys/.../events/in_activity_jogging_thresh_rising_period 1275What: /sys/.../events/in_activity_jogging_thresh_falling_period 1276What: /sys/.../events/in_activity_running_thresh_rising_period 1277What: /sys/.../events/in_activity_running_thresh_falling_period 1278What: /sys/.../events/in_illuminance_thresh_either_period 1279KernelVersion: 2.6.37 1280Contact: linux-iio@vger.kernel.org 1281Description: 1282 Period of time (in seconds) for which the condition must be 1283 met before an event is generated. If direction is not 1284 specified then this period applies to both directions. 1285 1286What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db 1287What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db 1288What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db 1289KernelVersion: 4.2 1290Contact: linux-iio@vger.kernel.org 1291Description: 1292 If a low pass filter can be applied to the event generation 1293 this property gives its 3db frequency in Hz. 1294 A value of zero disables the filter. 1295 1296What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db 1297What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db 1298What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db 1299KernelVersion: 4.2 1300Contact: linux-iio@vger.kernel.org 1301Description: 1302 If a high pass filter can be applied to the event generation 1303 this property gives its 3db frequency in Hz. 1304 A value of zero disables the filter. 1305 1306What: /sys/.../events/in_activity_still_thresh_rising_en 1307What: /sys/.../events/in_activity_still_thresh_falling_en 1308What: /sys/.../events/in_activity_walking_thresh_rising_en 1309What: /sys/.../events/in_activity_walking_thresh_falling_en 1310What: /sys/.../events/in_activity_jogging_thresh_rising_en 1311What: /sys/.../events/in_activity_jogging_thresh_falling_en 1312What: /sys/.../events/in_activity_running_thresh_rising_en 1313What: /sys/.../events/in_activity_running_thresh_falling_en 1314KernelVersion: 3.19 1315Contact: linux-iio@vger.kernel.org 1316Description: 1317 Enables or disables activity events. Depending on direction 1318 an event is generated when sensor ENTERS or LEAVES a given state. 1319 1320What: /sys/.../events/in_activity_still_thresh_rising_value 1321What: /sys/.../events/in_activity_still_thresh_falling_value 1322What: /sys/.../events/in_activity_walking_thresh_rising_value 1323What: /sys/.../events/in_activity_walking_thresh_falling_value 1324What: /sys/.../events/in_activity_jogging_thresh_rising_value 1325What: /sys/.../events/in_activity_jogging_thresh_falling_value 1326What: /sys/.../events/in_activity_running_thresh_rising_value 1327What: /sys/.../events/in_activity_running_thresh_falling_value 1328KernelVersion: 3.19 1329Contact: linux-iio@vger.kernel.org 1330Description: 1331 Confidence value (in units as percentage) to be used 1332 for deciding when an event should be generated. E.g for 1333 running: If the confidence value reported by the sensor 1334 is greater than in_activity_running_thresh_rising_value 1335 then the sensor ENTERS running state. Conversely, if the 1336 confidence value reported by the sensor is lower than 1337 in_activity_running_thresh_falling_value then the sensor 1338 is LEAVING running state. 1339 1340What: /sys/.../iio:deviceX/events/in_accel_mag_en 1341What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en 1342What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en 1343What: /sys/.../iio:deviceX/events/in_accel_x_mag_en 1344What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en 1345What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en 1346What: /sys/.../iio:deviceX/events/in_accel_y_mag_en 1347What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en 1348What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en 1349What: /sys/.../iio:deviceX/events/in_accel_z_mag_en 1350What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en 1351What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en 1352What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en 1353What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en 1354KernelVersion: 2.6.37 1355Contact: linux-iio@vger.kernel.org 1356Description: 1357 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1358 magnitude of the channel is compared to the threshold, not its 1359 signed value. 1360 1361What: /sys/.../events/in_accel_raw_mag_value 1362What: /sys/.../events/in_accel_x_raw_mag_rising_value 1363What: /sys/.../events/in_accel_y_raw_mag_rising_value 1364What: /sys/.../events/in_accel_z_raw_mag_rising_value 1365KernelVersion: 2.6.37 1366Contact: linux-iio@vger.kernel.org 1367Description: 1368 The value to which the magnitude of the channel is compared. If 1369 number or direction is not specified, applies to all channels of 1370 this type. 1371 1372What: /sys/.../iio:deviceX/events/in_accel_x_mag_adaptive_rising_en 1373What: /sys/.../iio:deviceX/events/in_accel_y_mag_adaptive_rising_en 1374What: /sys/.../iio:deviceX/events/in_accel_z_mag_adaptive_rising_en 1375KernelVersion: 2.6.37 1376Contact: linux-iio@vger.kernel.org 1377Description: 1378 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1379 magnitude of the channel is compared to the adaptive threshold. 1380 1381What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en 1382What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en 1383What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en 1384What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en 1385What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en 1386What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en 1387KernelVersion: 5.18 1388Contact: linux-iio@vger.kernel.org 1389Description: 1390 Similar to in_accel_mag[_y][_rising|_falling]_en, but the event 1391 value is relative to a reference magnitude. The reference magnitude 1392 includes the graviational acceleration. 1393 1394What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_value 1395What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value 1396What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value 1397What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value 1398What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value 1399What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value 1400KernelVersion: 5.18 1401Contact: linux-iio@vger.kernel.org 1402Description: 1403 The value to which the reference magnitude of the channel is 1404 compared. If the axis is not specified, it applies to all channels 1405 of this type. 1406 1407What: /sys/.../events/in_steps_change_en 1408KernelVersion: 4.0 1409Contact: linux-iio@vger.kernel.org 1410Description: 1411 Event generated when channel passes a threshold on the absolute 1412 change in value. E.g. for steps: a step change event is 1413 generated each time the user takes N steps, where N is set using 1414 in_steps_change_value. 1415 1416What: /sys/.../events/in_steps_change_value 1417KernelVersion: 4.0 1418Contact: linux-iio@vger.kernel.org 1419Description: 1420 Specifies the value of change threshold that the 1421 device is comparing against for the events enabled by 1422 <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps: 1423 if set to 3, a step change event will be generated every 3 1424 steps. 1425 1426What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger 1427KernelVersion: 2.6.35 1428Contact: linux-iio@vger.kernel.org 1429Description: 1430 The name of the trigger source being used, as per string given 1431 in /sys/class/iio/triggerY/name. 1432 1433What: /sys/bus/iio/devices/iio:deviceX/bufferY/length 1434KernelVersion: 5.11 1435Contact: linux-iio@vger.kernel.org 1436Description: 1437 Number of scans contained by the buffer. 1438 1439What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable 1440KernelVersion: 5.11 1441Contact: linux-iio@vger.kernel.org 1442Description: 1443 Actually start the buffer capture up. Will start trigger 1444 if first device and appropriate. 1445 1446 Note that it might be impossible to configure other attributes, 1447 (e.g.: events, scale, sampling rate) if they impact the currently 1448 active buffer capture session. 1449 1450What: /sys/bus/iio/devices/iio:deviceX/bufferY 1451KernelVersion: 5.11 1452Contact: linux-iio@vger.kernel.org 1453Description: 1454 Directory containing interfaces for elements that will be 1455 captured for a single triggered sample set in the buffer. 1456 1457 Since kernel 5.11 the scan_elements attributes are merged into 1458 the bufferY directory, to be configurable per buffer. 1459 1460What: /sys/.../iio:deviceX/bufferY/in_accel_x_en 1461What: /sys/.../iio:deviceX/bufferY/in_accel_y_en 1462What: /sys/.../iio:deviceX/bufferY/in_accel_z_en 1463What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en 1464What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en 1465What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en 1466What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en 1467What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en 1468What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en 1469What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en 1470What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en 1471What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en 1472What: /sys/.../iio:deviceX/bufferY/in_magn_x_en 1473What: /sys/.../iio:deviceX/bufferY/in_magn_y_en 1474What: /sys/.../iio:deviceX/bufferY/in_magn_z_en 1475What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en 1476What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en 1477What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en 1478What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en 1479What: /sys/.../iio:deviceX/bufferY/in_timestamp_en 1480What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en 1481What: /sys/.../iio:deviceX/bufferY/in_voltageY_en 1482What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en 1483What: /sys/.../iio:deviceX/bufferY/in_incli_x_en 1484What: /sys/.../iio:deviceX/bufferY/in_incli_y_en 1485What: /sys/.../iio:deviceX/bufferY/in_pressureY_en 1486What: /sys/.../iio:deviceX/bufferY/in_pressure_en 1487What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_en 1488What: /sys/.../iio:deviceX/bufferY/in_proximity_en 1489KernelVersion: 5.11 1490Contact: linux-iio@vger.kernel.org 1491Description: 1492 Scan element control for triggered data capture. 1493 1494What: /sys/.../iio:deviceX/bufferY/in_accel_type 1495What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type 1496What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type 1497What: /sys/.../iio:deviceX/bufferY/in_anglvel_type 1498What: /sys/.../iio:deviceX/bufferY/in_magn_type 1499What: /sys/.../iio:deviceX/bufferY/in_incli_type 1500What: /sys/.../iio:deviceX/bufferY/in_voltageY_type 1501What: /sys/.../iio:deviceX/bufferY/in_voltage_type 1502What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type 1503What: /sys/.../iio:deviceX/bufferY/in_timestamp_type 1504What: /sys/.../iio:deviceX/bufferY/in_pressureY_type 1505What: /sys/.../iio:deviceX/bufferY/in_pressure_type 1506What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_type 1507What: /sys/.../iio:deviceX/bufferY/in_proximity_type 1508KernelVersion: 5.11 1509Contact: linux-iio@vger.kernel.org 1510Description: 1511 Description of the scan element data storage within the buffer 1512 and hence the form in which it is read from user-space. 1513 Form is [be|le]:[s|u]bits/storagebits[>>shift]. 1514 be or le specifies big or little endian. s or u specifies if 1515 signed (2's complement) or unsigned. bits is the number of bits 1516 of data and storagebits is the space (after padding) that it 1517 occupies in the buffer. shift if specified, is the shift that 1518 needs to be applied prior to masking out unused bits. Some 1519 devices put their data in the middle of the transferred elements 1520 with additional information on both sides. Note that some 1521 devices will have additional information in the unused bits 1522 so to get a clean value, the bits value must be used to mask 1523 the buffer output value appropriately. The storagebits value 1524 also specifies the data alignment. So s48/64>>2 will be a 1525 signed 48 bit integer stored in a 64 bit location aligned to 1526 a 64 bit boundary. To obtain the clean value, shift right 2 1527 and apply a mask to zero the top 16 bits of the result. 1528 For other storage combinations this attribute will be extended 1529 appropriately. 1530 1531What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available 1532KernelVersion: 2.6.37 1533Contact: linux-iio@vger.kernel.org 1534Description: 1535 If the type parameter can take one of a small set of values, 1536 this attribute lists them. 1537 1538What: /sys/.../iio:deviceX/bufferY/in_voltageY_index 1539What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index 1540What: /sys/.../iio:deviceX/bufferY/in_accel_x_index 1541What: /sys/.../iio:deviceX/bufferY/in_accel_y_index 1542What: /sys/.../iio:deviceX/bufferY/in_accel_z_index 1543What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index 1544What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index 1545What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index 1546What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index 1547What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index 1548What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index 1549What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index 1550What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index 1551What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index 1552What: /sys/.../iio:deviceX/bufferY/in_magn_x_index 1553What: /sys/.../iio:deviceX/bufferY/in_magn_y_index 1554What: /sys/.../iio:deviceX/bufferY/in_magn_z_index 1555What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index 1556What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index 1557What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index 1558What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index 1559What: /sys/.../iio:deviceX/bufferY/in_incli_x_index 1560What: /sys/.../iio:deviceX/bufferY/in_incli_y_index 1561What: /sys/.../iio:deviceX/bufferY/in_timestamp_index 1562What: /sys/.../iio:deviceX/bufferY/in_pressureY_index 1563What: /sys/.../iio:deviceX/bufferY/in_pressure_index 1564What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_index 1565What: /sys/.../iio:deviceX/bufferY/in_proximity_index 1566KernelVersion: 5.11 1567Contact: linux-iio@vger.kernel.org 1568Description: 1569 A single positive integer specifying the position of this 1570 scan element in the buffer. Note these are not dependent on 1571 what is enabled and may not be contiguous. Thus for user-space 1572 to establish the full layout these must be used in conjunction 1573 with all _en attributes to establish which channels are present, 1574 and the relevant _type attributes to establish the data storage 1575 format. 1576 1577What: /sys/.../iio:deviceX/in_activity_still_input 1578What: /sys/.../iio:deviceX/in_activity_walking_input 1579What: /sys/.../iio:deviceX/in_activity_jogging_input 1580What: /sys/.../iio:deviceX/in_activity_running_input 1581KernelVersion: 3.19 1582Contact: linux-iio@vger.kernel.org 1583Description: 1584 This attribute is used to read the confidence for an activity 1585 expressed in units as percentage. 1586 1587What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw 1588KernelVersion: 2.6.38 1589Contact: linux-iio@vger.kernel.org 1590Description: 1591 This attribute is used to read the amount of quadrature error 1592 present in the device at a given time. 1593 1594What: /sys/.../iio:deviceX/in_accelY_power_mode 1595KernelVersion: 3.11 1596Contact: linux-iio@vger.kernel.org 1597Description: 1598 Specifies the chip power mode. 1599 low_noise: reduce noise level from ADC, 1600 low_power: enable low current consumption. 1601 For a list of available output power modes read 1602 in_accel_power_mode_available. 1603 1604What: /sys/.../iio:deviceX/in_energy_input 1605What: /sys/.../iio:deviceX/in_energy_raw 1606What: /sys/.../iio:deviceX/in_energyY_active_raw 1607What: /sys/.../iio:deviceX/in_energyY_reactive_raw 1608What: /sys/.../iio:deviceX/in_energyY_apparent_raw 1609KernelVersion: 4.0 1610Contact: linux-iio@vger.kernel.org 1611Description: 1612 This attribute is used to read the energy value reported by the 1613 device (e.g.: human activity sensors report energy burnt by the 1614 user). Units after application of scale are Joules. 1615 1616What: /sys/.../iio:deviceX/in_distance_input 1617What: /sys/.../iio:deviceX/in_distance_raw 1618KernelVersion: 4.0 1619Contact: linux-iio@vger.kernel.org 1620Description: 1621 This attribute is used to read the measured distance to an object 1622 or the distance covered by the user since the last reboot while 1623 activated. Units after application of scale are meters. 1624 1625What: /sys/bus/iio/devices/iio:deviceX/store_eeprom 1626KernelVersion: 3.4.0 1627Contact: linux-iio@vger.kernel.org 1628Description: 1629 Writing '1' stores the current device configuration into 1630 on-chip EEPROM. After power-up or chip reset the device will 1631 automatically load the saved configuration. 1632 1633What: /sys/.../iio:deviceX/in_proximity_raw 1634What: /sys/.../iio:deviceX/in_proximity_input 1635What: /sys/.../iio:deviceX/in_proximityY_raw 1636KernelVersion: 3.4 1637Contact: linux-iio@vger.kernel.org 1638Description: 1639 Proximity measurement indicating that some 1640 object is near the sensor, usually by observing 1641 reflectivity of infrared or ultrasound emitted. 1642 1643 Often these sensors are unit less and as such conversion 1644 to SI units is not possible. Higher proximity measurements 1645 indicate closer objects, and vice versa. Units after 1646 application of scale and offset are meters. 1647 1648What: /sys/.../iio:deviceX/in_illuminance_input 1649What: /sys/.../iio:deviceX/in_illuminance_raw 1650What: /sys/.../iio:deviceX/in_illuminanceY_input 1651What: /sys/.../iio:deviceX/in_illuminanceY_raw 1652What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw 1653What: /sys/.../iio:deviceX/in_illuminance_ir_raw 1654What: /sys/.../iio:deviceX/in_illuminance_clear_raw 1655KernelVersion: 3.4 1656Contact: linux-iio@vger.kernel.org 1657Description: 1658 Illuminance measurement, units after application of scale 1659 and offset are lux. 1660 1661What: /sys/.../iio:deviceX/in_intensityY_raw 1662What: /sys/.../iio:deviceX/in_intensityY_ir_raw 1663What: /sys/.../iio:deviceX/in_intensityY_both_raw 1664What: /sys/.../iio:deviceX/in_intensityY_uv_raw 1665What: /sys/.../iio:deviceX/in_intensityY_uva_raw 1666What: /sys/.../iio:deviceX/in_intensityY_uvb_raw 1667What: /sys/.../iio:deviceX/in_intensityY_duv_raw 1668What: /sys/.../iio:deviceX/in_intensity_red_raw 1669What: /sys/.../iio:deviceX/in_intensity_green_raw 1670What: /sys/.../iio:deviceX/in_intensity_blue_raw 1671What: /sys/.../iio:deviceX/in_intensity_clear_raw 1672KernelVersion: 3.4 1673Contact: linux-iio@vger.kernel.org 1674Description: 1675 Unit-less light intensity. Modifiers both and ir indicate 1676 that measurements contain visible and infrared light 1677 components or just infrared light, respectively. Modifier 1678 uv indicates that measurements contain ultraviolet light 1679 components. Modifiers uva, uvb and duv indicate that 1680 measurements contain A, B or deep (C) ultraviolet light 1681 components respectively. 1682 1683What: /sys/.../iio:deviceX/in_uvindex_input 1684KernelVersion: 4.6 1685Contact: linux-iio@vger.kernel.org 1686Description: 1687 UV light intensity index measuring the human skin's response to 1688 different wavelength of sunlight weighted according to the 1689 standardised CIE Erythemal Action Spectrum. UV index values range 1690 from 0 (low) to >=11 (extreme). 1691 1692What: /sys/.../iio:deviceX/in_intensity_integration_time 1693What: /sys/.../iio:deviceX/in_intensity_red_integration_time 1694What: /sys/.../iio:deviceX/in_intensity_green_integration_time 1695What: /sys/.../iio:deviceX/in_intensity_blue_integration_time 1696What: /sys/.../iio:deviceX/in_intensity_clear_integration_time 1697What: /sys/.../iio:deviceX/in_illuminance_integration_time 1698KernelVersion: 3.12 1699Contact: linux-iio@vger.kernel.org 1700Description: 1701 This attribute is used to get/set the integration time in 1702 seconds. If shared across all channels of a given type, 1703 <type>_integration_time is used. 1704 1705What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time 1706KernelVersion: 4.0 1707Contact: linux-iio@vger.kernel.org 1708Description: 1709 Number of seconds in which to compute speed. 1710 1711What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw 1712KernelVersion: 3.15 1713Contact: linux-iio@vger.kernel.org 1714Description: 1715 Raw value of quaternion components using a format 1716 x y z w. Here x, y, and z component represents the axis about 1717 which a rotation will occur and w component represents the 1718 amount of rotation. 1719 1720What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw 1721What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw 1722What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw 1723What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw 1724KernelVersion: 3.15 1725Contact: linux-iio@vger.kernel.org 1726Description: 1727 Raw value of rotation from true/magnetic north measured with 1728 or without compensation from tilt sensors. 1729 1730What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw 1731What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw 1732KernelVersion: 3.17 1733Contact: linux-iio@vger.kernel.org 1734Description: 1735 Raw current measurement from channel Y. Units are in milliamps 1736 after application of scale and offset. If no offset or scale is 1737 present, output should be considered as processed with the 1738 unit in milliamps. In special cases where the channel does not 1739 correspond to externally available input one of the named 1740 versions may be used. 1741 1742 Channels with 'i' and 'q' modifiers always exist in pairs and both 1743 channels refer to the same signal. The 'i' channel contains the in-phase 1744 component of the signal while the 'q' channel contains the quadrature 1745 component. 1746 1747What: /sys/bus/iio/devices/iio:deviceX/in_altcurrentY_rms_raw 1748KernelVersion: 6.18 1749Contact: linux-iio@vger.kernel.org 1750Description: 1751 Raw (unscaled no bias removal etc.) Root Mean Square (RMS) current 1752 measurement from channel Y. Units after application of scale and 1753 offset are milliamps. 1754 1755What: /sys/.../iio:deviceX/in_energy_en 1756What: /sys/.../iio:deviceX/in_distance_en 1757What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en 1758What: /sys/.../iio:deviceX/in_steps_en 1759KernelVersion: 3.19 1760Contact: linux-iio@vger.kernel.org 1761Description: 1762 Activates a device feature that runs in firmware/hardware. 1763 E.g. for steps: the pedometer saves power while not used; 1764 when activated, it will count the steps taken by the user in 1765 firmware and export them through in_steps_input. 1766 1767What: /sys/.../iio:deviceX/in_steps_input 1768KernelVersion: 3.19 1769Contact: linux-iio@vger.kernel.org 1770Description: 1771 This attribute is used to read the number of steps taken by the user 1772 since the last reboot while activated. 1773 1774What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input 1775What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw 1776KernelVersion: 3.19 1777Contact: linux-iio@vger.kernel.org 1778Description: 1779 This attribute is used to read the current speed value of the 1780 user (which is the norm or magnitude of the velocity vector). 1781 Units after application of scale are m/s. 1782 1783What: /sys/.../iio:deviceX/in_steps_debounce_count 1784KernelVersion: 4.0 1785Contact: linux-iio@vger.kernel.org 1786Description: 1787 Specifies the number of steps that must occur within 1788 in_steps_filter_debounce_time for the pedometer to decide the 1789 consumer is making steps. 1790 1791What: /sys/.../iio:deviceX/in_steps_debounce_time 1792KernelVersion: 4.0 1793Contact: linux-iio@vger.kernel.org 1794Description: 1795 Specifies number of seconds in which we compute the steps 1796 that occur in order to decide if the consumer is making steps. 1797 1798What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark 1799KernelVersion: 5.11 1800Contact: linux-iio@vger.kernel.org 1801Description: 1802 A single positive integer specifying the maximum number of scan 1803 elements to wait for. 1804 1805 Poll will block until the watermark is reached. 1806 1807 Blocking read will wait until the minimum between the requested 1808 read amount or the low water mark is available. 1809 1810 Non-blocking read will retrieve the available samples from the 1811 buffer even if there are less samples then watermark level. This 1812 allows the application to block on poll with a timeout and read 1813 the available samples after the timeout expires and thus have a 1814 maximum delay guarantee. 1815 1816What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available 1817KernelVersion: 5.11 1818Contact: linux-iio@vger.kernel.org 1819Description: 1820 A read-only value indicating the bytes of data available in the 1821 buffer. In the case of an output buffer, this indicates the 1822 amount of empty space available to write data to. In the case of 1823 an input buffer, this indicates the amount of data available for 1824 reading. 1825 1826What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled 1827KernelVersion: 4.2 1828Contact: linux-iio@vger.kernel.org 1829Description: 1830 A read-only boolean value that indicates if the hardware fifo is 1831 currently enabled or disabled. If the device does not have a 1832 hardware fifo this entry is not present. 1833 The hardware fifo is enabled when the buffer is enabled if the 1834 current hardware fifo watermark level is set and other current 1835 device settings allows it (e.g. if a trigger is set that samples 1836 data differently that the hardware fifo does then hardware fifo 1837 will not enabled). 1838 1839 If the hardware fifo is enabled and the level of the hardware 1840 fifo reaches the hardware fifo watermark level the device will 1841 flush its hardware fifo to the device buffer. Doing a non 1842 blocking read on the device when no samples are present in the 1843 device buffer will also force a flush. 1844 1845 When the hardware fifo is enabled there is no need to use a 1846 trigger to use buffer mode since the watermark settings 1847 guarantees that the hardware fifo is flushed to the device 1848 buffer. 1849 1850What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout 1851KernelVersion: 4.12 1852Contact: linux-iio@vger.kernel.org 1853Description: 1854 A read/write property to provide capability to delay reporting of 1855 samples till a timeout is reached. This allows host processors to 1856 sleep, while the sensor is storing samples in its internal fifo. 1857 The maximum timeout in seconds can be specified by setting 1858 hwfifo_timeout.The current delay can be read by reading 1859 hwfifo_timeout. A value of 0 means that there is no timeout. 1860 1861What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark 1862KernelVersion: 4.2 1863Contact: linux-iio@vger.kernel.org 1864Description: 1865 Read-only entry that contains a single integer specifying the 1866 current watermark level for the hardware fifo. If the device 1867 does not have a hardware fifo this entry is not present. 1868 The watermark level for the hardware fifo is set by the driver 1869 based on the value set by the user in buffer/watermark but 1870 taking into account hardware limitations (e.g. most hardware 1871 buffers are limited to 32-64 samples, some hardware buffers 1872 watermarks are fixed or have minimum levels). A value of 0 1873 means that the hardware watermark is unset. 1874 1875What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min 1876KernelVersion: 4.2 1877Contact: linux-iio@vger.kernel.org 1878Description: 1879 A single positive integer specifying the minimum watermark level 1880 for the hardware fifo of this device. If the device does not 1881 have a hardware fifo this entry is not present. 1882 1883 If the user sets buffer/watermark to a value less than this one, 1884 then the hardware watermark will remain unset. 1885 1886What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max 1887KernelVersion: 4.2 1888Contact: linux-iio@vger.kernel.org 1889Description: 1890 A single positive integer specifying the maximum watermark level 1891 for the hardware fifo of this device. If the device does not 1892 have a hardware fifo this entry is not present. 1893 1894 If the user sets buffer/watermark to a value greater than this 1895 one, then the hardware watermark will be capped at this value. 1896 1897What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available 1898KernelVersion: 4.2 1899Contact: linux-iio@vger.kernel.org 1900Description: 1901 A list of positive integers specifying the available watermark 1902 levels for the hardware fifo. This entry is optional and if it 1903 is not present it means that all the values between 1904 hwfifo_watermark_min and hwfifo_watermark_max are supported. 1905 1906 If the user sets buffer/watermark to a value greater than 1907 hwfifo_watermak_min but not equal to any of the values in this 1908 list, the driver will chose an appropriate value for the 1909 hardware fifo watermark level. 1910 1911What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity 1912What: /sys/bus/iio/devices/iio:deviceX/in_tempY_calibemissivity 1913What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity 1914What: /sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibemissivity 1915KernelVersion: 4.1 1916Contact: linux-iio@vger.kernel.org 1917Description: 1918 The emissivity ratio of the surface in the field of view of the 1919 contactless temperature sensor. Emissivity varies from 0 to 1, 1920 with 1 being the emissivity of a black body. 1921 1922What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio 1923What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio 1924What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio 1925KernelVersion: 4.2 1926Contact: linux-iio@vger.kernel.org 1927Description: 1928 Hardware applied number of measurements for acquiring one 1929 data point. The HW will do <type>[_name]_oversampling_ratio 1930 measurements and return the average value as output data. Each 1931 value resulted from <type>[_name]_oversampling_ratio measurements 1932 is considered as one sample for <type>[_name]_sampling_frequency. 1933 1934What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw 1935What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_raw 1936What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw 1937What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_co2_raw 1938What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw 1939What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_ethanol_raw 1940What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw 1941What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_h2_raw 1942What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw 1943What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_o2_raw 1944What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw 1945What: /sys/bus/iio/devices/iio:deviceX/in_concentrationY_voc_raw 1946KernelVersion: 4.3 1947Contact: linux-iio@vger.kernel.org 1948Description: 1949 Raw (unscaled no offset etc.) reading of a substance. Units 1950 after application of scale and offset are percents. 1951 1952What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw 1953What: /sys/bus/iio/devices/iio:deviceX/in_resistanceY_raw 1954What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw 1955What: /sys/bus/iio/devices/iio:deviceX/out_resistanceY_raw 1956KernelVersion: 4.3 1957Contact: linux-iio@vger.kernel.org 1958Description: 1959 Raw (unscaled no offset etc.) resistance reading. 1960 Units after application of scale and offset are ohms. 1961 1962What: /sys/bus/iio/devices/iio:deviceX/heater_enable 1963KernelVersion: 4.1.0 1964Contact: linux-iio@vger.kernel.org 1965Description: 1966 '1' (enable) or '0' (disable) specifying the enable 1967 of heater function. Same reading values apply. 1968 1969 This ABI is especially applicable for humidity sensors 1970 to heatup the device and get rid of any condensation 1971 in some humidity environment 1972 1973What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw 1974KernelVersion: 4.5 1975Contact: linux-iio@vger.kernel.org 1976Description: 1977 Raw (unscaled no offset etc.) pH reading of a substance as a negative 1978 base-10 logarithm of hydrodium ions in a litre of water. 1979 1980What: /sys/bus/iio/devices/iio:deviceX/mount_matrix 1981What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix 1982What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix 1983What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix 1984What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix 1985KernelVersion: 4.6 1986Contact: linux-iio@vger.kernel.org 1987Description: 1988 Mounting matrix for IIO sensors. This is a rotation matrix which 1989 informs userspace about sensor chip's placement relative to the 1990 main hardware it is mounted on. 1991 1992 Main hardware placement is defined according to the local 1993 reference frame related to the physical quantity the sensor 1994 measures. 1995 1996 Given that the rotation matrix is defined in a board specific 1997 way (platform data and / or device-tree), the main hardware 1998 reference frame definition is left to the implementor's choice 1999 (see below for a magnetometer example). 2000 2001 Applications should apply this rotation matrix to samples so 2002 that when main hardware reference frame is aligned onto local 2003 reference frame, then sensor chip reference frame is also 2004 perfectly aligned with it. 2005 2006 Matrix is a 3x3 unitary matrix and typically looks like 2007 [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix 2008 [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware 2009 are perfectly aligned with each other. 2010 2011 For example, a mounting matrix for a magnetometer sensor informs 2012 userspace about sensor chip's ORIENTATION relative to the main 2013 hardware. 2014 2015 More specifically, main hardware orientation is defined with 2016 respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : 2017 2018 * Y is in the ground plane and positive towards magnetic North ; 2019 * X is in the ground plane, perpendicular to the North axis and 2020 positive towards the East ; 2021 * Z is perpendicular to the ground plane and positive upwards. 2022 2023 An implementor might consider that for a hand-held device, a 2024 'natural' orientation would be 'front facing camera at the top'. 2025 The main hardware reference frame could then be described as : 2026 2027 * Y is in the plane of the screen and is positive towards the 2028 top of the screen ; 2029 * X is in the plane of the screen, perpendicular to Y axis, and 2030 positive towards the right hand side of the screen ; 2031 * Z is perpendicular to the screen plane and positive out of the 2032 screen. 2033 2034 Another example for a quadrotor UAV might be : 2035 2036 * Y is in the plane of the propellers and positive towards the 2037 front-view camera; 2038 * X is in the plane of the propellers, perpendicular to Y axis, 2039 and positive towards the starboard side of the UAV ; 2040 * Z is perpendicular to propellers plane and positive upwards. 2041 2042What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw 2043KernelVersion: 4.8 2044Contact: linux-iio@vger.kernel.org 2045Description: 2046 Raw (unscaled no offset etc.) electric conductivity reading. 2047 Units after application of scale and offset are siemens per 2048 meter. 2049 2050What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw 2051KernelVersion: 4.10 2052Contact: linux-iio@vger.kernel.org 2053Description: 2054 This interface is deprecated; please use the Counter subsystem. 2055 2056 Raw counter device counts from channel Y. For quadrature 2057 counters, multiplication by an available [Y]_scale results in 2058 the counts of a single quadrature signal phase from channel Y. 2059 2060What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw 2061KernelVersion: 4.10 2062Contact: linux-iio@vger.kernel.org 2063Description: 2064 This interface is deprecated; please use the Counter subsystem. 2065 2066 Raw counter device index value from channel Y. This attribute 2067 provides an absolute positional reference (e.g. a pulse once per 2068 revolution) which may be used to home positional systems as 2069 required. 2070 2071What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available 2072KernelVersion: 4.12 2073Contact: linux-iio@vger.kernel.org 2074Description: 2075 This interface is deprecated; please use the Counter subsystem. 2076 2077 A list of possible counting directions which are: 2078 2079 - "up" : counter device is increasing. 2080 - "down": counter device is decreasing. 2081 2082What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction 2083KernelVersion: 4.12 2084Contact: linux-iio@vger.kernel.org 2085Description: 2086 This interface is deprecated; please use the Counter subsystem. 2087 2088 Raw counter device counters direction for channel Y. 2089 2090What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label 2091What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label 2092KernelVersion: 5.8 2093Contact: linux-iio@vger.kernel.org 2094Description: 2095 Optional symbolic label to a device channel. 2096 If a label is defined for this channel add that to the channel 2097 specific attributes. This is useful for userspace to be able to 2098 better identify an individual channel. 2099 2100What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw 2101KernelVersion: 4.18 2102Contact: linux-iio@vger.kernel.org 2103Description: 2104 Raw (unscaled) phase difference reading from channel Y. 2105 Units after application of scale and offset are radians. 2106 2107What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input 2108What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input 2109What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input 2110What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input 2111What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input 2112What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input 2113What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input 2114What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input 2115KernelVersion: 4.22 2116Contact: linux-iio@vger.kernel.org 2117Description: 2118 Mass concentration reading of particulate matter in ug / m3. 2119 pmX consists of particles with aerodynamic diameter less or 2120 equal to X micrometers. 2121 2122What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available 2123Date: November 2019 2124KernelVersion: 5.4 2125Contact: linux-iio@vger.kernel.org 2126Description: 2127 List of valid periods (in seconds) for which the light intensity 2128 must be above the threshold level before interrupt is asserted. 2129 2130What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency 2131KernelVersion: 5.5 2132Contact: linux-iio@vger.kernel.org 2133Description: 2134 Center frequency in Hz for a notch filter. Used i.e. for line 2135 noise suppression. 2136 2137What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type 2138KernelVersion: 5.5 2139Contact: linux-iio@vger.kernel.org 2140Description: 2141 One of the following thermocouple types: B, E, J, K, N, R, S, T. 2142 2143What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient 2144What: /sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibambient 2145KernelVersion: 5.10 2146Contact: linux-iio@vger.kernel.org 2147Description: 2148 Calibrated ambient temperature for object temperature 2149 calculation in milli degrees Celsius. 2150 2151What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw 2152What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw 2153What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw 2154KernelVersion: 5.10 2155Contact: linux-iio@vger.kernel.org 2156Description: 2157 Unscaled light intensity according to CIE 1931/DIN 5033 color space. 2158 Units after application of scale are nano nanowatts per square meter. 2159 2160What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label 2161KernelVersion: 5.12 2162Contact: linux-iio@vger.kernel.org 2163Description: 2164 Optional symbolic label for channel Y. 2165 For Intel hid hinge sensor, the label values are: 2166 hinge, keyboard, screen. It means the three channels 2167 each correspond respectively to hinge angle, keyboard angle, 2168 and screen angle. 2169 2170What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative 2171What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative 2172KernelVersion: 5.12 2173Contact: linux-iio@vger.kernel.org 2174Description: 2175 Specify the percent for light sensor relative to the channel 2176 absolute value that a data field should change before an event 2177 is generated. Units are a percentage of the prior reading. 2178 2179What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable 2180Date: June 2020 2181KernelVersion: 5.8 2182Contact: linux-iio@vger.kernel.org 2183Description: 2184 Some sensors have the ability to apply auto calibration at 2185 runtime. For example, it may be necessary to compensate for 2186 contaminant build-up in a measurement chamber or optical 2187 element deterioration that would otherwise lead to sensor drift. 2188 2189 Writing 1 or 0 to this attribute will respectively activate or 2190 deactivate this auto calibration function. 2191 2192 Upon reading, the current status is returned. 2193 2194What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value 2195Date: June 2020 2196KernelVersion: 5.8 2197Contact: linux-iio@vger.kernel.org 2198Description: 2199 Some sensors have the ability to apply a manual calibration using 2200 a known measurement value, perhaps obtained from an external 2201 reference device. 2202 2203 Writing a value to this function will force such a calibration 2204 change. For the scd30 the value should be from the range 2205 [400 1 2000]. 2206 2207 Note for the scd30 that a valid value may only be obtained once 2208 it is has been written. Until then any read back of this value 2209 should be ignored. As for the scd4x an error will be returned 2210 immediately if the manual calibration has failed. 2211 2212What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available 2213KernelVersion: 5.15 2214Contact: linux-iio@vger.kernel.org 2215Description: 2216 Available range for the forced calibration value, expressed as: 2217 2218 - a range specified as "[min step max]" 2219 2220What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_sampling_frequency 2221What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency 2222What: /sys/bus/iio/devices/iio:deviceX/in_currentY_sampling_frequency 2223KernelVersion: 5.20 2224Contact: linux-iio@vger.kernel.org 2225Description: 2226 Some devices have separate controls of sampling frequency for 2227 individual channels. If multiple channels are enabled in a scan, 2228 then the sampling_frequency of the scan may be computed from the 2229 per channel sampling frequencies. 2230 2231What: /sys/.../events/in_accel_gesture_singletap_en 2232What: /sys/.../events/in_accel_gesture_doubletap_en 2233KernelVersion: 6.1 2234Contact: linux-iio@vger.kernel.org 2235Description: 2236 Device generates an event on a single or double tap. 2237 2238What: /sys/.../events/in_accel_gesture_singletap_value 2239What: /sys/.../events/in_accel_gesture_doubletap_value 2240KernelVersion: 6.1 2241Contact: linux-iio@vger.kernel.org 2242Description: 2243 Specifies the threshold value that the device is comparing 2244 against to generate the tap gesture event. The lower 2245 threshold value increases the sensitivity of tap detection. 2246 Units and the exact meaning of value are device-specific. 2247 2248What: /sys/.../events/in_accel_gesture_tap_value_available 2249KernelVersion: 6.1 2250Contact: linux-iio@vger.kernel.org 2251Description: 2252 Lists all available threshold values which can be used to 2253 modify the sensitivity of the tap detection. 2254 2255What: /sys/.../events/in_accel_gesture_singletap_reset_timeout 2256What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout 2257KernelVersion: 6.1 2258Contact: linux-iio@vger.kernel.org 2259Description: 2260 Specifies the timeout value in seconds for the tap detector 2261 to not to look for another tap event after the event as 2262 occurred. Basically the minimum quiet time between the two 2263 single-tap's or two double-tap's. 2264 2265What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available 2266KernelVersion: 6.1 2267Contact: linux-iio@vger.kernel.org 2268Description: 2269 Lists all available tap reset timeout values. Units in seconds. 2270 2271What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay 2272KernelVersion: 6.1 2273Contact: linux-iio@vger.kernel.org 2274Description: 2275 Specifies the minimum quiet time in seconds between the two 2276 taps of a double tap. 2277 2278What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available 2279KernelVersion: 6.1 2280Contact: linux-iio@vger.kernel.org 2281Description: 2282 Lists all available delay values between two taps in the double 2283 tap. Units in seconds. 2284 2285What: /sys/.../events/in_accel_gesture_tap_maxtomin_time 2286KernelVersion: 6.1 2287Contact: linux-iio@vger.kernel.org 2288Description: 2289 Specifies the maximum time difference allowed between upper 2290 and lower peak of tap to consider it as the valid tap event. 2291 Units in seconds. 2292 2293What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available 2294KernelVersion: 6.1 2295Contact: linux-iio@vger.kernel.org 2296Description: 2297 Lists all available time values between upper peak to lower 2298 peak. Units in seconds. 2299 2300What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw 2301What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw 2302What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw 2303KernelVersion: 6.1 2304Contact: linux-iio@vger.kernel.org 2305Description: 2306 Raw (unscaled) euler angles readings. Units after 2307 application of scale are deg. 2308 2309What: /sys/bus/iio/devices/iio:deviceX/serialnumber 2310KernelVersion: 6.1 2311Contact: linux-iio@vger.kernel.org 2312Description: 2313 An example format is 16-bytes, 2-digits-per-byte, HEX-string 2314 representing the sensor unique ID number. 2315 2316What: /sys/bus/iio/devices/iio:deviceX/filter_type_available 2317What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_type_available 2318KernelVersion: 6.1 2319Contact: linux-iio@vger.kernel.org 2320Description: 2321 Reading returns a list with the possible filter modes. Options 2322 for the attribute: 2323 2324 * "none" - Filter is disabled/bypassed. 2325 * "sinc1" - The digital sinc1 filter. Fast 1st 2326 conversion time. Poor noise performance. 2327 * "sinc3" - The digital sinc3 filter. Moderate 1st 2328 conversion time. Good noise performance. 2329 * "sinc3+pf1" - Sinc3 + device specific Post Filter 1. 2330 * "sinc3+pf2" - Sinc3 + device specific Post Filter 2. 2331 * "sinc3+pf3" - Sinc3 + device specific Post Filter 3. 2332 * "sinc3+pf4" - Sinc3 + device specific Post Filter 4. 2333 * "sinc3+rej60" - Sinc3 + 60Hz rejection. 2334 * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion 2335 time. 2336 * "sinc4" - Sinc 4. Excellent noise performance. Long 2337 1st conversion time. 2338 * "sinc4+lp" - Sinc4 + Low Pass Filter. 2339 * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion 2340 time. 2341 * "sinc4+rej60" - Sinc4 + 60Hz rejection. 2342 * "sinc5" - The digital sinc5 filter. Excellent noise 2343 performance 2344 * "sinc5+avg" - Sinc5 + averaging by 4. 2345 * "sinc5+pf1" - Sinc5 + device specific Post Filter 1. 2346 * "sinc5+sinc1" - Sinc5 + Sinc1. 2347 * "sinc5+sinc1+pf1" - Sinc5 + Sinc1 + device specific Post Filter 1. 2348 * "sinc5+sinc1+pf2" - Sinc5 + Sinc1 + device specific Post Filter 2. 2349 * "sinc5+sinc1+pf3" - Sinc5 + Sinc1 + device specific Post Filter 3. 2350 * "sinc5+sinc1+pf4" - Sinc5 + Sinc1 + device specific Post Filter 4. 2351 * "wideband" - filter with wideband low ripple passband 2352 and sharp transition band. 2353 2354What: /sys/bus/iio/devices/iio:deviceX/filter_type 2355What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_type 2356KernelVersion: 6.1 2357Contact: linux-iio@vger.kernel.org 2358Description: 2359 Specifies which filter type apply to the channel. The possible 2360 values are given by the filter_type_available attribute. 2361 2362What: /sys/.../events/in_proximity_thresh_either_runningperiod 2363KernelVersion: 6.6 2364Contact: linux-iio@vger.kernel.org 2365Description: 2366 A running period of time (in seconds) for which 2367 in_proximity_thresh_either_runningcount amount of conditions 2368 must occur before an event is generated. If direction is not 2369 specified then this period applies to both directions. 2370 2371What: /sys/.../events/in_proximity_thresh_either_runningcount 2372KernelVersion: 6.6 2373Contact: linux-iio@vger.kernel.org 2374Description: 2375 Number of conditions that must occur, during a running 2376 period, before an event is generated. 2377 2378What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw 2379KernelVersion: 6.7 2380Contact: linux-iio@vger.kernel.org 2381Description: 2382 Represents light color temperature, which measures light color 2383 temperature in Kelvin. 2384 2385What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw 2386What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw 2387KernelVersion: 6.7 2388Contact: linux-iio@vger.kernel.org 2389Description: 2390 The x and y light color coordinate on the CIE 1931 chromaticity 2391 diagram. 2392 2393What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label 2394What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label 2395What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label 2396What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label 2397What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label 2398What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label 2399What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label 2400KernelVersion: 6.7 2401Contact: linux-iio@vger.kernel.org 2402Description: 2403 Optional symbolic label to a device channel event. 2404 If a label is defined for this event add that to the event 2405 specific attributes. This is useful for userspace to be able to 2406 better identify an individual event. 2407 2408What: /sys/.../events/in_accel_gesture_tap_wait_timeout 2409KernelVersion: 6.7 2410Contact: linux-iio@vger.kernel.org 2411Description: 2412 Enable tap gesture confirmation with timeout. 2413 2414What: /sys/.../events/in_accel_gesture_tap_wait_dur 2415KernelVersion: 6.7 2416Contact: linux-iio@vger.kernel.org 2417Description: 2418 Timeout value in seconds for tap gesture confirmation. 2419 2420What: /sys/.../events/in_accel_gesture_tap_wait_dur_available 2421KernelVersion: 6.7 2422Contact: linux-iio@vger.kernel.org 2423Description: 2424 List of available timeout value for tap gesture confirmation. 2425 2426What: /sys/.../iio:deviceX/in_shunt_resistor 2427What: /sys/.../iio:deviceX/in_current_shunt_resistor 2428What: /sys/.../iio:deviceX/in_power_shunt_resistor 2429KernelVersion: 6.10 2430Contact: linux-iio@vger.kernel.org 2431Description: 2432 The value of current sense resistor in Ohms. 2433 2434What: /sys/.../iio:deviceX/in_attention_input 2435KernelVersion: 6.13 2436Contact: linux-iio@vger.kernel.org 2437Description: 2438 Value representing the user's attention to the system expressed 2439 in units as percentage. This usually means if the user is 2440 looking at the screen or not. 2441 2442What: /sys/.../events/in_accel_value_available 2443KernelVersion: 6.18 2444Contact: linux-iio@vger.kernel.org 2445Description: 2446 List of available threshold values for acceleration event 2447 generation. Applies to all event types on in_accel channels. 2448 Units after application of scale and offset are m/s^2. 2449 Expressed as: 2450 2451 - a range specified as "[min step max]" 2452 2453What: /sys/.../events/in_accel_period_available 2454KernelVersion: 6.18 2455Contact: linux-iio@vger.kernel.org 2456Description: 2457 List of available periods for accelerometer event detection in 2458 seconds, expressed as: 2459 2460 - a range specified as "[min step max]" 2461