1 /* $FreeBSD$ */ 2 /* 3 * Copyright (c) 2000 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification, immediately at the beginning of the file. 12 * 2. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * Alternatively, this software may be distributed under the terms of the 16 * the GNU Public License ("GPL"). 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Matthew Jacob 31 * Feral Software 32 * mjacob@feral.com 33 */ 34 35 #include <sys/types.h> 36 37 #include <err.h> 38 #include <stddef.h> 39 #include <stdlib.h> 40 #include <stdio.h> 41 #include <cam/scsi/scsi_enc.h> 42 #include <libxo/xo.h> 43 44 #include "eltsub.h" 45 46 /* 47 * offset by +20 degrees. 48 * The range of the value expresses a temperature between -19 and +235 degrees 49 * Celsius. A value of 00h is reserved. 50 */ 51 #define TEMPERATURE_OFFSET 20 52 53 const char * 54 geteltnm(int type) 55 { 56 static char rbuf[132]; 57 58 switch (type) { 59 case ELMTYP_UNSPECIFIED: 60 return ("Unspecified"); 61 case ELMTYP_DEVICE: 62 return ("Device Slot"); 63 case ELMTYP_POWER: 64 return ("Power Supply"); 65 case ELMTYP_FAN: 66 return ("Cooling"); 67 case ELMTYP_THERM: 68 return ("Temperature Sensor"); 69 case ELMTYP_DOORLOCK: 70 return ("Door Lock"); 71 case ELMTYP_ALARM: 72 return ("Audible Alarm"); 73 case ELMTYP_ESCC: 74 return ("Enclosure Services Controller Electronics"); 75 case ELMTYP_SCC: 76 return ("SCC Controller Electronics"); 77 case ELMTYP_NVRAM: 78 return ("Nonvolatile Cache"); 79 case ELMTYP_INV_OP_REASON: 80 return ("Invalid Operation Reason"); 81 case ELMTYP_UPS: 82 return ("Uninterruptible Power Supply"); 83 case ELMTYP_DISPLAY: 84 return ("Display"); 85 case ELMTYP_KEYPAD: 86 return ("Key Pad Entry"); 87 case ELMTYP_ENCLOSURE: 88 return ("Enclosure"); 89 case ELMTYP_SCSIXVR: 90 return ("SCSI Port/Transceiver"); 91 case ELMTYP_LANGUAGE: 92 return ("Language"); 93 case ELMTYP_COMPORT: 94 return ("Communication Port"); 95 case ELMTYP_VOM: 96 return ("Voltage Sensor"); 97 case ELMTYP_AMMETER: 98 return ("Current Sensor"); 99 case ELMTYP_SCSI_TGT: 100 return ("SCSI Target Port"); 101 case ELMTYP_SCSI_INI: 102 return ("SCSI Initiator Port"); 103 case ELMTYP_SUBENC: 104 return ("Simple Subenclosure"); 105 case ELMTYP_ARRAY_DEV: 106 return ("Array Device Slot"); 107 case ELMTYP_SAS_EXP: 108 return ("SAS Expander"); 109 case ELMTYP_SAS_CONN: 110 return ("SAS Connector"); 111 default: 112 snprintf(rbuf, sizeof(rbuf), "<Type 0x%x>", type); 113 return (rbuf); 114 } 115 } 116 117 const char * 118 scode2ascii(u_char code) 119 { 120 static char rbuf[32]; 121 switch (code & 0xf) { 122 case SES_OBJSTAT_UNSUPPORTED: 123 return ("Unsupported"); 124 case SES_OBJSTAT_OK: 125 return ("OK"); 126 case SES_OBJSTAT_CRIT: 127 return ("Critical"); 128 case SES_OBJSTAT_NONCRIT: 129 return ("Noncritical"); 130 case SES_OBJSTAT_UNRECOV: 131 return ("Unrecoverable"); 132 case SES_OBJSTAT_NOTINSTALLED: 133 return ("Not Installed"); 134 case SES_OBJSTAT_UNKNOWN: 135 return ("Unknown"); 136 case SES_OBJSTAT_NOTAVAIL: 137 return ("Not Available"); 138 case SES_OBJSTAT_NOACCESS: 139 return ("No Access Allowed"); 140 default: 141 snprintf(rbuf, sizeof(rbuf), "<Status 0x%x>", code & 0xf); 142 return (rbuf); 143 } 144 } 145