1 /*
2 * Copyright (c) 2000 by Matthew Jacob
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. The name of the author may not be used to endorse or promote products
12 * derived from this software without specific prior written permission.
13 *
14 * Alternatively, this software may be distributed under the terms of the
15 * the GNU Public License ("GPL").
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 * Matthew Jacob
30 * Feral Software
31 * mjacob@feral.com
32 */
33
34 #include <sys/types.h>
35
36 #include <stddef.h>
37 #include <stdlib.h>
38 #include <stdio.h>
39 #include <cam/scsi/scsi_enc.h>
40 #include <libxo/xo.h>
41
42 #include "eltsub.h"
43
44 /*
45 * offset by +20 degrees.
46 * The range of the value expresses a temperature between -19 and +235 degrees
47 * Celsius. A value of 00h is reserved.
48 */
49 #define TEMPERATURE_OFFSET 20
50
51 const char *
geteltnm(int type)52 geteltnm(int type)
53 {
54 static char rbuf[132];
55
56 switch (type) {
57 case ELMTYP_UNSPECIFIED:
58 return ("Unspecified");
59 case ELMTYP_DEVICE:
60 return ("Device Slot");
61 case ELMTYP_POWER:
62 return ("Power Supply");
63 case ELMTYP_FAN:
64 return ("Cooling");
65 case ELMTYP_THERM:
66 return ("Temperature Sensor");
67 case ELMTYP_DOORLOCK:
68 return ("Door Lock");
69 case ELMTYP_ALARM:
70 return ("Audible Alarm");
71 case ELMTYP_ESCC:
72 return ("Enclosure Services Controller Electronics");
73 case ELMTYP_SCC:
74 return ("SCC Controller Electronics");
75 case ELMTYP_NVRAM:
76 return ("Nonvolatile Cache");
77 case ELMTYP_INV_OP_REASON:
78 return ("Invalid Operation Reason");
79 case ELMTYP_UPS:
80 return ("Uninterruptible Power Supply");
81 case ELMTYP_DISPLAY:
82 return ("Display");
83 case ELMTYP_KEYPAD:
84 return ("Key Pad Entry");
85 case ELMTYP_ENCLOSURE:
86 return ("Enclosure");
87 case ELMTYP_SCSIXVR:
88 return ("SCSI Port/Transceiver");
89 case ELMTYP_LANGUAGE:
90 return ("Language");
91 case ELMTYP_COMPORT:
92 return ("Communication Port");
93 case ELMTYP_VOM:
94 return ("Voltage Sensor");
95 case ELMTYP_AMMETER:
96 return ("Current Sensor");
97 case ELMTYP_SCSI_TGT:
98 return ("SCSI Target Port");
99 case ELMTYP_SCSI_INI:
100 return ("SCSI Initiator Port");
101 case ELMTYP_SUBENC:
102 return ("Simple Subenclosure");
103 case ELMTYP_ARRAY_DEV:
104 return ("Array Device Slot");
105 case ELMTYP_SAS_EXP:
106 return ("SAS Expander");
107 case ELMTYP_SAS_CONN:
108 return ("SAS Connector");
109 default:
110 snprintf(rbuf, sizeof(rbuf), "<Type 0x%x>", type);
111 return (rbuf);
112 }
113 }
114
115 const char *
scode2ascii(u_char code)116 scode2ascii(u_char code)
117 {
118 static char rbuf[32];
119 switch (code & 0xf) {
120 case SES_OBJSTAT_UNSUPPORTED:
121 return ("Unsupported");
122 case SES_OBJSTAT_OK:
123 return ("OK");
124 case SES_OBJSTAT_CRIT:
125 return ("Critical");
126 case SES_OBJSTAT_NONCRIT:
127 return ("Noncritical");
128 case SES_OBJSTAT_UNRECOV:
129 return ("Unrecoverable");
130 case SES_OBJSTAT_NOTINSTALLED:
131 return ("Not Installed");
132 case SES_OBJSTAT_UNKNOWN:
133 return ("Unknown");
134 case SES_OBJSTAT_NOTAVAIL:
135 return ("Not Available");
136 case SES_OBJSTAT_NOACCESS:
137 return ("No Access Allowed");
138 default:
139 snprintf(rbuf, sizeof(rbuf), "<Status 0x%x>", code & 0xf);
140 return (rbuf);
141 }
142 }
143