1#!/bin/sh 2#- 3# Copyright (c) 2013 Allan Jude 4# Copyright (c) 2013 Devin Teske 5# All rights reserved. 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions 9# are met: 10# 1. Redistributions of source code must retain the above copyright 11# notice, this list of conditions and the following disclaimer. 12# 2. Redistributions in binary form must reproduce the above copyright 13# notice, this list of conditions and the following disclaimer in the 14# documentation and/or other materials provided with the distribution. 15# 16# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26# SUCH DAMAGE. 27# 28# $FreeBSD$ 29# 30############################################################ INCLUDES 31 32BSDCFG_SHARE="/usr/share/bsdconfig" 33. $BSDCFG_SHARE/common.subr || exit 1 34f_dprintf "%s: loading includes..." "$0" 35f_include $BSDCFG_SHARE/device.subr 36f_include $BSDCFG_SHARE/dialog.subr 37f_include $BSDCFG_SHARE/password/password.subr 38f_include $BSDCFG_SHARE/variable.subr 39 40############################################################ CONFIGURATION 41 42# 43# Default name of the boot-pool 44# 45: ${ZFSBOOT_POOL_NAME:=zroot} 46 47# 48# Default name for the boot environment parent dataset 49# 50: ${ZFSBOOT_BEROOT_NAME:=ROOT} 51 52# 53# Default name for the primany boot environment 54# 55: ${ZFSBOOT_BOOTFS_NAME:=default} 56 57# 58# Default Virtual Device (vdev) type to create 59# 60: ${ZFSBOOT_VDEV_TYPE:=stripe} 61 62# 63# Should we use gnop(8) to configure a transparent mapping to 4K sectors? 64# 65: ${ZFSBOOT_GNOP_4K_FORCE_ALIGN:=1} 66 67# 68# Should we use geli(8) to encrypt the drives? 69# NB: Automatically enables ZFSBOOT_BOOT_POOL 70# 71: ${ZFSBOOT_GELI_ENCRYPTION=} 72 73# 74# Default path to the geli(8) keyfile used in drive encryption 75# 76: ${ZFSBOOT_GELI_KEY_FILE:=/boot/encryption.key} 77 78# 79# Create a separate boot pool? 80# NB: Automatically set when using geli(8) or MBR 81# 82: ${ZFSBOOT_BOOT_POOL=} 83 84# 85# Default name for boot pool when enabled (e.g., geli(8) or MBR) 86# 87: ${ZFSBOOT_BOOT_POOL_NAME:=bootpool} 88 89# 90# Default size for boot pool when enabled (e.g., geli(8) or MBR) 91# 92: ${ZFSBOOT_BOOT_POOL_SIZE:=2g} 93 94# 95# Default disks to use (always empty unless being scripted) 96# 97: ${ZFSBOOT_DISKS:=} 98 99# 100# Default partitioning scheme to use on disks 101# 102: ${ZFSBOOT_PARTITION_SCHEME:=GPT} 103 104# 105# How much swap to put on each block device in the boot zpool 106# NOTE: Value passed to gpart(8); which supports SI unit suffixes. 107# 108: ${ZFSBOOT_SWAP_SIZE:=2g} 109 110# 111# Default ZFS datasets for root zpool 112# 113# NOTE: Requires /tmp, /var/tmp, /$ZFSBOOT_BOOTFS_NAME/$ZFSBOOT_BOOTFS_NAME 114# NOTE: Anything after pound/hash character [#] is ignored as a comment. 115# 116f_isset ZFSBOOT_DATASETS || ZFSBOOT_DATASETS=" 117 # DATASET OPTIONS (comma or space separated; or both) 118 119 # Boot Environment [BE] root and default boot dataset 120 /$ZFSBOOT_BEROOT_NAME mountpoint=none 121 /$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME mountpoint=/ 122 123 # Compress /tmp, allow exec but not setuid 124 /tmp mountpoint=/tmp,compression=lz4,exec=on,setuid=off 125 126 # Don't mount /usr so that 'base' files go to the BEROOT 127 /usr mountpoint=/usr,canmount=off 128 129 # Home directories separated so they are common to all BEs 130 /usr/home # NB: /home is a symlink to /usr/home 131 132 # Ports tree 133 /usr/ports compression=lz4,setuid=off 134 135 # Source tree (compressed) 136 /usr/src compression=lz4,exec=off,setuid=off 137 138 # Create /var and friends 139 /var mountpoint=/var 140 /var/crash compression=lz4,exec=off,setuid=off 141 /var/log compression=lz4,exec=off,setuid=off 142 /var/mail compression=lz4,atime=on 143 /var/tmp compression=lz4,exec=on,setuid=off 144" # END-QUOTE 145 146# 147# If interactive and the user has not explicitly chosen a vdev type or disks, 148# make the user confirm scripted/default choices when proceeding to install. 149# 150: ${ZFSBOOT_CONFIRM_LAYOUT:=1} 151 152############################################################ GLOBALS 153 154# 155# Format of a line in printf(1) syntax to add to fstab(5) 156# 157FSTAB_FMT="%s\t\t%s\t%s\t%s\t\t%s\t%s\n" 158 159# 160# Command strings for various tasks 161# 162CHMOD_MODE='chmod %s "%s"' 163DD_WITH_OPTIONS='dd if="%s" of="%s" %s' 164ECHO_APPEND='echo "%s" >> "%s"' 165GELI_ATTACH='geli attach -j - -k "%s" "%s"' 166GELI_DETACH_F='geli detach -f "%s"' 167GELI_PASSWORD_INIT='geli init -b -B "%s" -e %s -J - -K "%s" -l 256 -s 4096 "%s"' 168GNOP_CREATE='gnop create -S 4096 "%s"' 169GNOP_DESTROY='gnop destroy "%s"' 170GPART_ADD='gpart add -t %s "%s"' 171GPART_ADD_INDEX='gpart add -i %s -t %s "%s"' 172GPART_ADD_INDEX_WITH_SIZE='gpart add -i %s -t %s -s %s "%s"' 173GPART_ADD_LABEL='gpart add -l %s -t %s "%s"' 174GPART_ADD_LABEL_WITH_SIZE='gpart add -l %s -t %s -s %s "%s"' 175GPART_BOOTCODE='gpart bootcode -b "%s" "%s"' 176GPART_BOOTCODE_PART='gpart bootcode -b "%s" -p "%s" -i %s "%s"' 177GPART_CREATE='gpart create -s %s "%s"' 178GPART_DESTROY_F='gpart destroy -F "%s"' 179GPART_SET_ACTIVE='gpart set -a active -i %s "%s"' 180GRAID_DELETE='graid delete "%s"' 181LN_SF='ln -sf "%s" "%s"' 182MKDIR_P='mkdir -p "%s"' 183MOUNT_TYPE='mount -t %s "%s" "%s"' 184PRINTF_CONF="printf '%s=\"%%s\"\\\n' %s >> \"%s\"" 185PRINTF_FSTAB='printf "$FSTAB_FMT" "%s" "%s" "%s" "%s" "%s" "%s" >> "%s"' 186SHELL_TRUNCATE=':> "%s"' 187UMOUNT='umount "%s"' 188ZFS_CREATE_WITH_OPTIONS='zfs create %s "%s"' 189ZFS_SET='zfs set "%s" "%s"' 190ZFS_UNMOUNT='zfs unmount "%s"' 191ZPOOL_CREATE_WITH_OPTIONS='zpool create %s "%s" %s %s' 192ZPOOL_EXPORT='zpool export "%s"' 193ZPOOL_IMPORT_WITH_OPTIONS='zpool import %s "%s"' 194ZPOOL_LABELCLEAR_F='zpool labelclear -f "%s"' 195ZPOOL_SET='zpool set %s "%s"' 196 197# 198# Strings that should be moved to an i18n file and loaded with f_include_lang() 199# 200hline_alnum_arrows_punc_tab_enter="Use alnum, arrows, punctuation, TAB or ENTER" 201hline_arrows_space_tab_enter="Use arrows, SPACE, TAB or ENTER" 202hline_arrows_tab_enter="Press arrows, TAB or ENTER" 203msg_an_unknown_error_occurred="An unknown error occurred" 204msg_back="Back" 205msg_cancel="Cancel" 206msg_change_selection="Change Selection" 207msg_configure_options="Configure Options:" 208msg_detailed_disk_info="gpart(8) show %s:\n%s\n\ncamcontrol(8) inquiry %s:\n%s\n\n\ncamcontrol(8) identify %s:\n%s\n" 209msg_disk_info="Disk Info" 210msg_disk_info_help="Get detailed information on disk device(s)" 211msg_encrypt_disks="Encrypt Disks?" 212msg_encrypt_disks_help="Use geli(8) to encrypt all data partitions" 213msg_error="Error" 214msg_force_4k_sectors="Force 4K Sectors?" 215msg_force_4k_sectors_help="Use gnop(8) to configure forced 4K sector alignment" 216msg_freebsd_installer="FreeBSD Installer" 217msg_geli_password="Enter a strong passphrase, used to protect your encryption keys. You will be required to enter this passphrase each time the system is booted" 218msg_geli_setup="Initializing encryption on selected disks,\n this will take several seconds per disk" 219msg_install="Install" 220msg_install_desc="Proceed with Installation" 221msg_install_help="Create ZFS boot pool with displayed options" 222msg_invalid_boot_pool_size="Invalid boot pool size \`%s'" 223msg_invalid_disk_argument="Invalid disk argument \`%s'" 224msg_invalid_index_argument="Invalid index argument \`%s'" 225msg_invalid_swap_size="Invalid swap size \`%s'" 226msg_invalid_virtual_device_type="Invalid Virtual Device type \`%s'" 227msg_last_chance_are_you_sure="Last Chance! Are you sure you want to destroy\nthe current contents of the following disks:\n\n %s" 228msg_last_chance_are_you_sure_color='\\ZrLast Chance!\\ZR Are you \\Z1sure\\Zn you want to \\Zr\\Z1destroy\\Zn\nthe current contents of the following disks:\n\n %s' 229msg_mirror_desc="Mirror - n-Way Mirroring" 230msg_mirror_help="[2+ Disks] Mirroring provides the best performance, but the least storage" 231msg_missing_disk_arguments="missing disk arguments" 232msg_missing_one_or_more_scripted_disks="Missing one or more scripted disks!" 233msg_no="NO" 234msg_no_disks_present_to_configure="No disk(s) present to configure" 235msg_no_disks_selected="No disks selected." 236msg_not_enough_disks_selected="Not enough disks selected. (%u < %u minimum)" 237msg_null_disk_argument="NULL disk argument" 238msg_null_index_argument="NULL index argument" 239msg_null_poolname="NULL poolname" 240msg_ok="OK" 241msg_partition_scheme="Partition Scheme" 242msg_partition_scheme_help="Toggle between GPT and MBR partitioning schemes" 243msg_please_enter_a_name_for_your_zpool="Please enter a name for your zpool:" 244msg_please_enter_amount_of_swap_space="Please enter amount of swap space (SI-Unit suffixes\nrecommended; e.g., \`2g' for 2 Gigabytes):" 245msg_please_select_one_or_more_disks="Please select one or more disks to create a zpool:" 246msg_pool_name="Pool Name" 247msg_pool_name_cannot_be_empty="Pool name cannot be empty." 248msg_pool_name_help="Customize the name of the zpool to be created (Required)" 249msg_pool_type_disks="Pool Type/Disks:" 250msg_pool_type_disks_help="Choose type of ZFS Virtual Device and disks to use (Required)" 251msg_processing_selection="Processing selection..." 252msg_raidz1_desc="RAID-Z1 - Single Redundant RAID" 253msg_raidz1_help="[3+ Disks] Withstand failure of 1 disk. Recommended for: 3, 5 or 9 disks" 254msg_raidz2_desc="RAID-Z2 - Double Redundant RAID" 255msg_raidz2_help="[4+ Disks] Withstand failure of 2 disks. Recommended for: 4, 6 or 10 disks" 256msg_raidz3_desc="RAID-Z3 - Triple Redundant RAID" 257msg_raidz3_help="[5+ Disks] Withstand failure of 3 disks. Recommended for: 5, 7 or 11 disks" 258msg_rescan_devices="Rescan Devices" 259msg_rescan_devices_help="Scan for device changes" 260msg_select="Select" 261msg_select_a_disk_device="Select a disk device" 262msg_select_virtual_device_type="Select Virtual Device type:" 263msg_stripe_desc="Stripe - No Redundancy" 264msg_stripe_help="[1+ Disks] Striping provides maximum storage but no redundancy" 265msg_swap_size="Swap Size" 266msg_swap_size_help="Customize how much swap space is allocated to each selected disk" 267msg_these_disks_are_too_small="These disks are too small given the amount of requested\nswap (%s) and/or geli(8) (%s) partitions, which would\ntake 50%% or more of each of the following selected disk\ndevices (not recommended):\n\n %s\n\nRecommend changing partition size(s) and/or selecting a\ndifferent set of devices." 268msg_unable_to_get_disk_capacity="Unable to get disk capacity of \`%s'" 269msg_unsupported_partition_scheme="%s is an unsupported partition scheme" 270msg_user_cancelled="User Cancelled." 271msg_yes="YES" 272msg_zfs_configuration="ZFS Configuration" 273 274############################################################ FUNCTIONS 275 276# dialog_menu_main 277# 278# Display the dialog(1)-based application main menu. 279# 280dialog_menu_main() 281{ 282 local title="$DIALOG_TITLE" 283 local btitle="$DIALOG_BACKTITLE" 284 local prompt="$msg_configure_options" 285 local force4k="$msg_no" 286 local usegeli="$msg_no" 287 [ "$ZFSBOOT_GNOP_4K_FORCE_ALIGN" ] && force4k="$msg_yes" 288 [ "$ZFSBOOT_GELI_ENCRYPTION" ] && usegeli="$msg_yes" 289 local disks n=$( set -- $ZFSBOOT_DISKS; echo $# ) 290 { [ $n -eq 1 ] && disks=disk; } || disks=disks # grammar 291 local menu_list=" 292 '>>> $msg_install' '$msg_install_desc' 293 '$msg_install_help' 294 'T $msg_pool_type_disks' '$ZFSBOOT_VDEV_TYPE: $n $disks' 295 '$msg_pool_type_disks_help' 296 '- $msg_rescan_devices' '*' 297 '$msg_rescan_devices_help' 298 '- $msg_disk_info' '*' 299 '$msg_disk_info_help' 300 'N $msg_pool_name' '$ZFSBOOT_POOL_NAME' 301 '$msg_pool_name_help' 302 '4 $msg_force_4k_sectors' '$force4k' 303 '$msg_force_4k_sectors_help' 304 'E $msg_encrypt_disks' '$usegeli' 305 '$msg_encrypt_disks_help' 306 'P $msg_partition_scheme' '$ZFSBOOT_PARTITION_SCHEME' 307 '$msg_partition_scheme_help' 308 'S $msg_swap_size' '$ZFSBOOT_SWAP_SIZE' 309 '$msg_swap_size_help' 310 " # END-QUOTE 311 local defaultitem= # Calculated below 312 local hline="$hline_alnum_arrows_punc_tab_enter" 313 314 local height width rows 315 eval f_dialog_menu_with_help_size height width rows \ 316 \"\$title\" \"\$btitle\" \"\$prompt\" \"\$hline\" $menu_list 317 318 # Obtain default-item from previously stored selection 319 f_dialog_default_fetch defaultitem 320 321 local menu_choice 322 menu_choice=$( eval $DIALOG \ 323 --title \"\$title\" \ 324 --backtitle \"\$btitle\" \ 325 --hline \"\$hline\" \ 326 --item-help \ 327 --ok-label \"\$msg_select\" \ 328 --cancel-label \"\$msg_cancel\" \ 329 --default-item \"\$defaultitem\" \ 330 --menu \"\$prompt\" \ 331 $height $width $rows \ 332 $menu_list \ 333 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 334 ) 335 local retval=$? 336 f_dialog_data_sanitize menu_choice 337 f_dialog_menutag_store "$menu_choice" 338 339 # Only update default-item on success 340 [ $retval -eq $DIALOG_OK ] && f_dialog_default_store "$menu_choice" 341 342 return $retval 343} 344 345# dialog_last_chance $disks ... 346# 347# Display a list of the disks that the user is about to destroy. The default 348# action is to return error status unless the user explicitly (non-default) 349# selects "Yes" from the noyes dialog. 350# 351dialog_last_chance() 352{ 353 local title="$DIALOG_TITLE" 354 local btitle="$DIALOG_BACKTITLE" 355 local prompt # Calculated below 356 local hline="$hline_arrows_tab_enter" 357 358 local height=8 width=50 prefix=" " 359 local plen=${#prefix} list= line= 360 local max_width=$(( $width - 3 - $plen )) 361 362 local yes no defaultno extra_args format 363 if [ "$USE_XDIALOG" ]; then 364 yes=ok no=cancel defaultno=default-no 365 extra_args="--wrap --left" 366 format="$msg_last_chance_are_you_sure" 367 else 368 yes=yes no=no defaultno=defaultno 369 extra_args="--colors --cr-wrap" 370 format="$msg_last_chance_are_you_sure_color" 371 fi 372 373 local disk line_width 374 for disk in $*; do 375 if [ "$line" ]; then 376 line_width=${#line} 377 else 378 line_width=$plen 379 fi 380 line_width=$(( $line_width + 1 + ${#disk} )) 381 # Add newline before disk if it would exceed max_width 382 if [ $line_width -gt $max_width ]; then 383 list="$list$line\n" 384 line="$prefix" 385 height=$(( $height + 1 )) 386 fi 387 # Add the disk to the list 388 line="$line $disk" 389 done 390 # Append the left-overs 391 if [ "${line#$prefix}" ]; then 392 list="$list$line" 393 height=$(( $height + 1 )) 394 fi 395 396 # Add height for Xdialog(1) 397 [ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 )) 398 399 prompt=$( printf "$format" "$list" ) 400 f_dprintf "%s: Last Chance!" "$0" 401 $DIALOG \ 402 --title "$title" \ 403 --backtitle "$btitle" \ 404 --hline "$hline" \ 405 --$defaultno \ 406 --$yes-label "$msg_yes" \ 407 --$no-label "$msg_no" \ 408 $extra_args \ 409 --yesno "$prompt" $height $width 410} 411 412# dialog_menu_layout 413# 414# Configure Virtual Device type and disks to use for the ZFS boot pool. User 415# must select enough disks to satisfy the chosen vdev type. 416# 417dialog_menu_layout() 418{ 419 local funcname=dialog_menu_layout 420 local title="$DIALOG_TITLE" 421 local btitle="$DIALOG_BACKTITLE" 422 local vdev_prompt="$msg_select_virtual_device_type" 423 local disk_prompt="$msg_please_select_one_or_more_disks" 424 local vdev_menu_list=" 425 'stripe' '$msg_stripe_desc' '$msg_stripe_help' 426 'mirror' '$msg_mirror_desc' '$msg_mirror_help' 427 'raidz1' '$msg_raidz1_desc' '$msg_raidz1_help' 428 'raidz2' '$msg_raidz2_desc' '$msg_raidz2_help' 429 'raidz3' '$msg_raidz3_desc' '$msg_raidz3_help' 430 " # END-QUOTE 431 local disk_check_list= # Calculated below 432 local vdev_hline="$hline_arrows_tab_enter" 433 local disk_hline="$hline_arrows_space_tab_enter" 434 435 # Warn the user if vdev type is not valid 436 case "$ZFSBOOT_VDEV_TYPE" in 437 stripe|mirror|raidz1|raidz2|raidz3) : known good ;; 438 *) 439 f_dprintf "%s: Invalid virtual device type \`%s'" \ 440 $funcname "$ZFSBOOT_VDEV_TYPE" 441 f_show_err "$msg_invalid_virtual_device_type" \ 442 "$ZFSBOOT_VDEV_TYPE" 443 f_interactive || return $FAILURE 444 esac 445 446 # Calculate size of vdev menu once only 447 local vheight vwidth vrows 448 eval f_dialog_menu_with_help_size vheight vwidth vrows \ 449 \"\$title\" \"\$btitle\" \"\$vdev_prompt\" \"\$vdev_hline\" \ 450 $vdev_menu_list 451 452 # Get a list of probed disk devices 453 local disks= 454 f_device_find "" $DEVICE_TYPE_DISK disks 455 f_dprintf "$funcname: disks=[%s]" "$disks" 456 if [ ! "$disks" ]; then 457 f_dprintf "No disk(s) present to configure" 458 f_show_err "$msg_no_disks_present_to_configure" 459 return $FAILURE 460 fi 461 462 # Lets sort the disks array to be more user friendly 463 disks=$( echo "$disks" | tr ' ' '\n' | sort | tr '\n' ' ' ) 464 465 # 466 # Operate in a loop so we can (if interactive) repeat if not enough 467 # disks are selected to satisfy the chosen vdev type or user wants to 468 # back-up to the previous menu. 469 # 470 local vardisk ndisks onoff selections vdev_choice 471 while :; do 472 # 473 # Confirm the vdev type that was selected 474 # 475 if f_interactive && [ "$ZFSBOOT_CONFIRM_LAYOUT" ]; then 476 vdev_choice=$( eval $DIALOG \ 477 --title \"\$title\" \ 478 --backtitle \"\$btitle\" \ 479 --hline \"\$vdev_hline\" \ 480 --ok-label \"\$msg_ok\" \ 481 --cancel-label \"\$msg_cancel\" \ 482 --item-help \ 483 --default-item \"\$ZFSBOOT_VDEV_TYPE\" \ 484 --menu \"\$vdev_prompt\" \ 485 $vheight $vwidth $vrows \ 486 $vdev_menu_list \ 487 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 488 ) || return $? 489 # Exit if user pressed ESC or chose Cancel/No 490 f_dialog_data_sanitize vdev_choice 491 492 ZFSBOOT_VDEV_TYPE="$vdev_choice" 493 f_dprintf "$funcname: ZFSBOOT_VDEV_TYPE=[%s]" \ 494 "$ZFSBOOT_VDEV_TYPE" 495 fi 496 497 # Determine the number of disks needed for this vdev type 498 local want_disks=0 499 case "$ZFSBOOT_VDEV_TYPE" in 500 stripe) want_disks=1 ;; 501 mirror) want_disks=2 ;; 502 raidz1) want_disks=3 ;; 503 raidz2) want_disks=4 ;; 504 raidz3) want_disks=5 ;; 505 esac 506 507 # Warn the user if any scripted disks are invalid 508 local disk valid_disks= 509 local all_valid=${ZFSBOOT_DISKS:+1} # optimism 510 for disk in $ZFSBOOT_DISKS; do 511 if f_struct device_$disk; then 512 valid_disks="$valid_disks $disk" 513 continue 514 fi 515 f_dprintf "$funcname: \`%s' is not a real disk" "$disk" 516 all_valid= 517 done 518 if [ ! "$all_valid" ]; then 519 if [ "$ZFSBOOT_DISKS" ]; then 520 f_show_err \ 521 "$msg_missing_one_or_more_scripted_disks" 522 else 523 f_dprintf "No disks selected." 524 f_interactive || 525 f_show_err "$msg_no_disks_selected" 526 fi 527 f_interactive || return $FAILURE 528 fi 529 ZFSBOOT_DISKS="${valid_disks# }" 530 531 # 532 # Short-circuit if we're running non-interactively 533 # 534 if ! f_interactive || [ ! "$ZFSBOOT_CONFIRM_LAYOUT" ]; then 535 ndisks=$( set -- $ZFSBOOT_DISKS; echo $# ) 536 [ $ndisks -ge $want_disks ] && break # to success 537 538 # Not enough disks selected 539 f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ 540 "$ZFSBOOT_VDEV_TYPE" \ 541 "Not enough disks selected." \ 542 $ndisks $want_disks 543 f_interactive || return $FAILURE 544 msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ 545 f_yesno "%s: $msg_not_enough_disks_selected" \ 546 "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || 547 return $FAILURE 548 fi 549 550 # 551 # Confirm the disks that were selected 552 # Loop until the user cancels or selects enough disks 553 # 554 local breakout= 555 while :; do 556 # Loop over list of available disks, resetting state 557 for disk in $disks; do unset _${disk}_status; done 558 559 # Loop over list of selected disks and create temporary 560 # locals to map statuses onto up-to-date list of disks 561 for disk in $ZFSBOOT_DISKS; do 562 local _${disk}_status=on 563 done 564 565 # Create the checklist menu of discovered disk devices 566 disk_check_list= 567 for disk in $disks; do 568 local desc= 569 device_$disk get desc desc 570 f_shell_escape "$desc" desc 571 f_getvar _${disk}_status:-off onoff 572 disk_check_list="$disk_check_list 573 $disk '$desc' $onoff" 574 done 575 576 local height width rows 577 eval f_dialog_checklist_size height width rows \ 578 \"\$title\" \"\$btitle\" \"\$prompt\" \ 579 \"\$hline\" $disk_check_list 580 581 selections=$( eval $DIALOG \ 582 --title \"\$DIALOG_TITLE\" \ 583 --backtitle \"\$DIALOG_BACKTITLE\" \ 584 --hline \"\$hline\" \ 585 --ok-label \"\$msg_ok\" \ 586 --cancel-label \"\$msg_back\" \ 587 --checklist \"\$prompt\" \ 588 $height $width $rows \ 589 $disk_check_list \ 590 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 591 ) || break 592 # Loop if user pressed ESC or chose Cancel/No 593 f_dialog_data_sanitize selections 594 595 ZFSBOOT_DISKS="$selections" 596 f_dprintf "$funcname: ZFSBOOT_DISKS=[%s]" \ 597 "$ZFSBOOT_DISKS" 598 599 ndisks=$( set -- $ZFSBOOT_DISKS; echo $# ) 600 [ $ndisks -ge $want_disks ] && 601 breakout=break && break 602 603 # Not enough disks selected 604 f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ 605 "$ZFSBOOT_VDEV_TYPE" \ 606 "Not enough disks selected." \ 607 $ndisks $want_disks 608 msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ 609 f_yesno "%s: $msg_not_enough_disks_selected" \ 610 "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || 611 break 612 done 613 [ "$breakout" = "break" ] && break 614 [ "$ZFSBOOT_CONFIRM_LAYOUT" ] || return $FAILURE 615 done 616 617 return $DIALOG_OK 618} 619 620# zfs_create_diskpart $disk $index 621# 622# For each block device to be used in the zpool, rather than just create the 623# zpool with the raw block devices (e.g., da0, da1, etc.) we create partitions 624# so we can have some real swap. This also provides wiggle room incase your 625# replacement drivers do not have the exact same sector counts. 626# 627# NOTE: $swapsize and $bootsize should be defined by the calling function. 628# NOTE: Sets $bootpart and $targetpart for the calling function. 629# 630zfs_create_diskpart() 631{ 632 local funcname=zfs_create_diskpart 633 local disk="$1" index="$2" 634 635 # Check arguments 636 if [ ! "$disk" ]; then 637 f_dprintf "$funcname: NULL disk argument" 638 msg_error="$msg_error: $funcname" \ 639 f_show_err "$msg_null_disk_argument" 640 return $FAILURE 641 fi 642 if [ "${disk#*[$IFS]}" != "$disk" ]; then 643 f_dprintf "$funcname: Invalid disk argument \`%s'" "$disk" 644 msg_error="$msg_error: $funcname" \ 645 f_show_err "$msg_invalid_disk_argument" "$disk" 646 return $FAILURE 647 fi 648 if [ ! "$index" ]; then 649 f_dprintf "$funcname: NULL index argument" 650 msg_error="$msg_error: $funcname" \ 651 f_show_err "$msg_null_index_argument" 652 return $FAILURE 653 fi 654 if ! f_isinteger "$index"; then 655 f_dprintf "$funcname: Invalid index argument \`%s'" "$index" 656 msg_error="$msg_error: $funcname" \ 657 f_show_err "$msg_invalid_index_argument" "$index" 658 return $FAILURE 659 fi 660 f_dprintf "$funcname: disk=[%s] index=[%s]" "$disk" "$index" 661 662 # Check for unknown partition scheme before proceeding further 663 case "$ZFSBOOT_PARTITION_SCHEME" in 664 ""|MBR|GPT) : known good ;; 665 *) 666 f_dprintf "$funcname: %s is an unsupported partition scheme" \ 667 "$ZFSBOOT_PARTITION_SCHEME" 668 msg_error="$msg_error: $funcname" f_show_err \ 669 "$msg_unsupported_partition_scheme" \ 670 "$ZFSBOOT_PARTITION_SCHEME" 671 return $FAILURE 672 esac 673 674 # 675 # Destroy whatever partition layout is currently on disk. 676 # NOTE: `-F' required to destroy if partitions still exist. 677 # NOTE: Failure is ok here, blank disk will have nothing to destroy. 678 # 679 f_dprintf "$funcname: Destroying all data/layouts on \`%s'..." "$disk" 680 f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk 681 f_eval_catch -d $funcname graid "$GRAID_DELETE" $disk 682 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" /dev/$disk 683 684 # Make doubly-sure backup GPT is destroyed 685 f_eval_catch -d $funcname gpart "$GPART_CREATE" gpt $disk 686 f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk 687 688 # 689 # Enable boot pool if encryption is desired 690 # 691 [ "$ZFSBOOT_GELI_ENCRYPTION" ] && ZFSBOOT_BOOT_POOL=1 692 693 # 694 # Lay down the desired type of partition scheme 695 # 696 local setsize mbrindex 697 case "$ZFSBOOT_PARTITION_SCHEME" in 698 ""|GPT) f_dprintf "$funcname: Creating GPT layout..." 699 # 700 # 1. Create GPT layout using labels 701 # 702 f_eval_catch $funcname gpart "$GPART_CREATE" gpt $disk || 703 return $FAILURE 704 705 # 706 # 2. Add small freebsd-boot partition labeled `boot#' 707 # 708 f_eval_catch $funcname gpart "$GPART_ADD_LABEL_WITH_SIZE" \ 709 gptboot$index freebsd-boot 512k $disk || 710 return $FAILURE 711 f_eval_catch $funcname gpart "$GPART_BOOTCODE_PART" \ 712 /boot/pmbr /boot/gptzfsboot 1 $disk || 713 return $FAILURE 714 715 # NB: zpool will use the `zfs#' GPT labels 716 bootpart=p2 targetpart=p2 717 [ ${swapsize:-0} -gt 0 ] && targetpart=p3 718 719 # 720 # Prepare boot pool if enabled (e.g., for geli(8)) 721 # 722 if [ "$ZFSBOOT_BOOT_POOL" ]; then 723 bootpart=p2 targetpart=p3 724 [ ${swapsize:-0} -gt 0 ] && targetpart=p4 725 f_eval_catch $funcname gpart \ 726 "$GPART_ADD_LABEL_WITH_SIZE" boot$index \ 727 freebsd-zfs ${bootsize}b $disk || 728 return $FAILURE 729 # Pedantically nuke any old labels 730 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 731 /dev/$disk$bootpart 732 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 733 # Pedantically detach targetpart for later 734 f_eval_catch -d $funcname geli \ 735 "$GELI_DETACH_F" \ 736 /dev/$disk$targetpart 737 fi 738 fi 739 740 # 741 # 3. Add freebsd-swap partition labeled `swap#' 742 # 743 if [ ${swapsize:-0} -gt 0 ]; then 744 f_eval_catch $funcname gpart \ 745 "$GPART_ADD_LABEL_WITH_SIZE" swap$index \ 746 freebsd-swap ${swapsize}b $disk || 747 return $FAILURE 748 # Pedantically nuke any old labels on the swap 749 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 750 /dev/gpt/swap$index 751 # Update fstab(5) 752 f_eval_catch $funcname printf "$PRINTF_FSTAB" \ 753 /dev/gpt/swap$index none swap sw 0 0 \ 754 $BSDINSTALL_TMPETC/fstab || 755 return $FAILURE 756 fi 757 758 # 759 # 4. Add freebsd-zfs partition labeled `zfs#' for zroot 760 # 761 f_eval_catch $funcname gpart "$GPART_ADD_LABEL" \ 762 zfs$index freebsd-zfs $disk || return $FAILURE 763 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 764 /dev/$disk$targetpart 765 ;; 766 767 MBR) f_dprintf "$funcname: Creating MBR layout..." 768 # 769 # 1. Create MBR layout (no labels) 770 # 771 f_eval_catch $funcname gpart "$GPART_CREATE" mbr $disk || 772 return $FAILURE 773 f_eval_catch $funcname gpart "$GPART_BOOTCODE" /boot/mbr \ 774 $disk || return $FAILURE 775 776 # 777 # 2. Add freebsd slice with all available space 778 # 779 f_eval_catch $funcname gpart "$GPART_ADD" freebsd $disk || 780 return $FAILURE 781 f_eval_catch $funcname gpart "$GPART_SET_ACTIVE" 1 $disk || 782 return $FAILURE 783 # Pedantically nuke any old labels 784 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 785 /dev/${disk}s1 786 # Pedantically nuke any old scheme 787 f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" ${disk}s1 788 789 # 790 # 3. Write BSD scheme to the freebsd slice 791 # 792 f_eval_catch $funcname gpart "$GPART_CREATE" BSD ${disk}s1 || 793 return $FAILURE 794 795 # NB: zpool will use s1a (no labels) 796 bootpart=s1a targetpart=s1d mbrindex=4 797 798 # 799 # Always prepare a boot pool on MBR 800 # 801 ZFSBOOT_BOOT_POOL=1 802 f_eval_catch $funcname gpart \ 803 "$GPART_ADD_INDEX_WITH_SIZE" \ 804 1 freebsd-zfs ${bootsize}b ${disk}s1 || 805 return $FAILURE 806 # Pedantically nuke any old labels 807 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 808 /dev/$disk$bootpart 809 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 810 # Pedantically detach targetpart for later 811 f_eval_catch -d $funcname geli \ 812 "$GELI_DETACH_F" \ 813 /dev/$disk$targetpart 814 fi 815 816 # 817 # 4. Add freebsd-swap partition 818 # 819 if [ ${swapsize:-0} -gt 0 ]; then 820 f_eval_catch $funcname gpart \ 821 "$GPART_ADD_INDEX_WITH_SIZE" 2 \ 822 freebsd-swap ${swapsize}b ${disk}s1 || 823 return $FAILURE 824 # Pedantically nuke any old labels on the swap 825 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 826 /dev/${disk}s1b 827 # Update fstab(5) 828 f_eval_catch $funcname printf "$PRINTF_FSTAB" \ 829 /dev/${disk}s1b none swap sw 0 0 \ 830 $BSDINSTALL_TMPETC/fstab || 831 return $FAILURE 832 fi 833 834 # 835 # 5. Add freebsd-zfs partition for zroot 836 # 837 f_eval_catch $funcname gpart "$GPART_ADD_INDEX" \ 838 $mbrindex freebsd-zfs ${disk}s1 || return $FAILURE 839 f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ 840 /dev/$disk$targetpart # Pedantic 841 f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ 842 /boot/zfsboot /dev/${disk}s1 count=1 || 843 return $FAILURE 844 ;; 845 846 esac # $ZFSBOOT_PARTITION_SCHEME 847 848 return $SUCCESS 849} 850 851# zfs_create_boot $poolname $vdev_type $disks ... 852# 853# Creates boot pool and dataset layout. Returns error if something goes wrong. 854# Errors are printed to stderr for collection and display. 855# 856zfs_create_boot() 857{ 858 local funcname=zfs_create_boot 859 local zroot_name="$1" 860 local zroot_vdevtype="$2" 861 local zroot_vdevs= # Calculated below 862 local boot_vdevs= # Used for geli(8) and/or MBR layouts 863 shift 2 # poolname vdev_type 864 local disks="$*" disk 865 local bootpart targetpart # Set by zfs_create_diskpart() below 866 867 # 868 # Pedantic checks; should never be seen 869 # 870 if [ ! "$zroot_name" ]; then 871 f_dprintf "$funcname: NULL poolname" 872 msg_error="$msg_error: $funcname" \ 873 f_show_err "$msg_null_poolname" 874 return $FAILURE 875 fi 876 if [ $# -lt 1 ]; then 877 f_dprintf "$funcname: missing disk arguments" 878 msg_error="$msg_error: $funcname" \ 879 f_show_err "$msg_missing_disk_arguments" 880 return $FAILURE 881 fi 882 f_dprintf "$funcname: poolname=[%s] vdev_type=[%s]" \ 883 "$zroot_name" "$zroot_vdevtype" 884 885 # 886 # Initialize fstab(5) 887 # 888 f_dprintf "$funcname: Initializing temporary fstab(5) file..." 889 f_eval_catch $funcname sh "$SHELL_TRUNCATE" $BSDINSTALL_TMPETC/fstab || 890 return $FAILURE 891 f_eval_catch $funcname printf "$PRINTF_FSTAB" \ 892 "# Device" Mountpoint FStype Options Dump "Pass#" \ 893 $BSDINSTALL_TMPETC/fstab || return $FAILURE 894 895 # 896 # Expand SI units in desired sizes 897 # 898 f_dprintf "$funcname: Expanding supplied size values..." 899 local swapsize bootsize 900 if ! f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize; then 901 f_dprintf "$funcname: Invalid swap size \`%s'" \ 902 "$ZFSBOOT_SWAP_SIZE" 903 f_show_err "$msg_invalid_swap_size" "$ZFSBOOT_SWAP_SIZE" 904 return $FAILURE 905 fi 906 if ! f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize; then 907 f_dprintf "$funcname: Invalid boot pool size \`%s'" \ 908 "$ZFSBOOT_BOOT_POOL_SIZE" 909 f_show_err "$msg_invalid_boot_pool_size" \ 910 "$ZFSBOOT_BOOT_POOL_SIZE" 911 return $FAILURE 912 fi 913 f_dprintf "$funcname: ZFSBOOT_SWAP_SIZE=[%s] swapsize=[%s]" \ 914 "$ZFSBOOT_SWAP_SIZE" "$swapsize" 915 f_dprintf "$funcname: ZFSBOOT_BOOT_POOL_SIZE=[%s] bootsize=[%s]" \ 916 "$ZFSBOOT_BOOT_POOL_SIZE" "$bootsize" 917 918 # 919 # Prepare the disks and build pool device list(s) 920 # 921 f_dprintf "$funcname: Preparing disk partitions for ZFS pool..." 922 [ "$ZFSBOOT_GNOP_4K_FORCE_ALIGN" ] && 923 f_dprintf "$funcname: With 4k alignment using gnop(8)..." 924 local n=0 925 for disk in $disks; do 926 zfs_create_diskpart $disk $n || return $FAILURE 927 # Now $bootpart and $targetpart are set (suffix for $disk) 928 929 # Forced 4k alignment support using Geom NOP (see gnop(8)) 930 if [ "$ZFSBOOT_GNOP_4K_FORCE_ALIGN" ]; then 931 if [ "$ZFSBOOT_BOOT_POOL" ]; then 932 boot_vdevs="$boot_vdevs $disk$bootpart.nop" 933 f_eval_catch $funcname gnop "$GNOP_CREATE" \ 934 $disk$bootpart || return $FAILURE 935 fi 936 # Don't gnop encrypted partition 937 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 938 zroot_vdevs="$zroot_vdevs $disk$targetpart.eli" 939 else 940 zroot_vdevs="$zroot_vdevs $disk$targetpart.nop" 941 f_eval_catch $funcname gnop "$GNOP_CREATE" \ 942 $disk$targetpart || 943 return $FAILURE 944 fi 945 else 946 if [ "$ZFSBOOT_BOOT_POOL" ]; then 947 boot_vdevs="$boot_vdevs $disk$bootpart" 948 fi 949 zroot_vdevs="$zroot_vdevs $disk$targetpart" 950 fi 951 952 n=$(( $n + 1 )) 953 done # disks 954 955 # 956 # If we need/want a boot pool, create it 957 # 958 if [ "$ZFSBOOT_BOOT_POOL" ]; then 959 local bootpool_vdevtype= # Calculated below 960 local bootpool_options= # Calculated below 961 local bootpool_name="$ZFSBOOT_BOOT_POOL_NAME" 962 local bootpool="$BSDINSTALL_CHROOT/$bootpool_name" 963 local zroot_key="${ZFSBOOT_GELI_KEY_FILE#/}" 964 965 f_dprintf "$funcname: Setting up boot pool..." 966 [ "$ZFSBOOT_GELI_ENCRYPTION" ] && 967 f_dprintf "$funcname: For encrypted root disk..." 968 969 # Create parent directory for boot pool 970 f_eval_catch -d $funcname umount "$UMOUNT" /mnt 971 f_eval_catch $funcname mount "$MOUNT_TYPE" tmpfs none \ 972 $BSDINSTALL_CHROOT || return $FAILURE 973 974 # Create mirror across the boot partition on all disks 975 [ $( set -- $boot_vdevs; echo $# ) -gt 1 ] && 976 bootpool_vdevtype=mirror 977 978 bootpool_options="-o altroot=$BSDINSTALL_CHROOT" 979 bootpool_options="$bootpool_options -m \"/$bootpool_name\" -f" 980 f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ 981 "$bootpool_options" "$bootpool_name" \ 982 "$bootpool_vdevtype" "$boot_vdevs" || 983 return $FAILURE 984 985 f_eval_catch $funcname mkdir "$MKDIR_P" "$bootpool/boot" || 986 return $FAILURE 987 988 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 989 # Generate an encryption key using random(4) 990 f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ 991 /dev/random "$bootpool/$zroot_key" \ 992 "bs=4096 count=1" || return $FAILURE 993 else 994 # Clean up 995 f_eval_catch $funcname zfs "$ZFS_UNMOUNT" \ 996 "$bootpool_name" || return $FAILURE 997 f_eval_catch -d $funcname umount "$UMOUNT" /mnt # tmpfs 998 fi 999 1000 fi 1001 1002 # 1003 # Create the geli(8) GEOMS 1004 # 1005 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 1006 # Prompt user for password (twice) 1007 if ! msg_enter_new_password="$msg_geli_password" \ 1008 f_dialog_input_password 1009 then 1010 f_dprintf "$funcname: User cancelled" 1011 f_show_err "$msg_user_cancelled" 1012 return $FAILURE 1013 fi 1014 1015 # Initialize geli(8) on each of the target partitions 1016 for disk in $disks; do 1017 f_dialog_info "$msg_geli_setup" \ 1018 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 1019 if ! echo "$pw_password" | f_eval_catch \ 1020 $funcname geli "$GELI_PASSWORD_INIT" \ 1021 "$bootpool/boot/$disk$targetpart.eli" \ 1022 AES-XTS "$bootpool/$zroot_key" \ 1023 $disk$targetpart 1024 then 1025 f_interactive || f_die 1026 unset pw_password # Sensitive info 1027 return $FAILURE 1028 fi 1029 if ! echo "$pw_password" | f_eval_catch \ 1030 $funcname geli "$GELI_ATTACH" \ 1031 "$bootpool/$zroot_key" $disk$targetpart 1032 then 1033 f_interactive || f_die 1034 unset pw_password # Sensitive info 1035 return $FAILURE 1036 fi 1037 done 1038 unset pw_password # Sensitive info 1039 1040 # Clean up 1041 f_eval_catch $funcname zfs "$ZFS_UNMOUNT" "$bootpool_name" || 1042 return $FAILURE 1043 f_eval_catch -d $funcname umount "$UMOUNT" /mnt # tmpfs 1044 fi 1045 1046 # 1047 # Create the ZFS root pool with desired type and disk devices 1048 # 1049 f_dprintf "$funcname: Creating root pool..." 1050 f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ 1051 "-o altroot=$BSDINSTALL_CHROOT -m none -f" \ 1052 "$zroot_name" "$zroot_vdevtype" "$zroot_vdevs" || 1053 return $FAILURE 1054 1055 # Customize the zroot a bit... 1056 local option 1057 f_dprintf "$funcname: Setting miscellaneous options on root pool..." 1058 for option in atime=off; do 1059 f_eval_catch $funcname zfs "$ZFS_SET" $option "$zroot_name" || 1060 return $FAILURE 1061 done 1062 1063 # 1064 # Create ZFS dataset layout within the new root pool 1065 # 1066 f_dprintf "$funcname: Creating ZFS datasets..." 1067 echo "$ZFSBOOT_DATASETS" | while read dataset options; do 1068 # Skip blank lines and comments 1069 case "$dataset" in "#"*|"") continue; esac 1070 # Remove potential inline comments in options 1071 options="${options%%#*}" 1072 # Replace tabs with spaces 1073 f_replaceall "$options" " " " " options 1074 # Reduce contiguous runs of space to one single space 1075 oldoptions= 1076 while [ "$oldoptions" != "$options" ]; do 1077 oldoptions="$options" 1078 f_replaceall "$options" " " " " options 1079 done 1080 # Replace both commas and spaces with ` -o ' 1081 f_replaceall "$options" "[ ,]" " -o " options 1082 # Create the dataset with desired options 1083 f_eval_catch $funcname zfs "$ZFS_CREATE_WITH_OPTIONS" \ 1084 "${options:+-o $options}" "$zroot_name$dataset" || 1085 return $FAILURE 1086 done 1087 1088 # Touch up permissions on the tmp directories 1089 f_dprintf "$funcname: Modifying directory permissions..." 1090 local dir 1091 for dir in /tmp /var/tmp; do 1092 f_eval_catch $funcname chmod "$CHMOD_MODE" 1777 \ 1093 $BSDINSTALL_CHROOTDIR$dir || return $FAILURE 1094 done 1095 1096 # Create symlink(s) 1097 if [ "$ZFSBOOT_BOOT_POOL" ]; then 1098 f_dprintf "$funcname: Creating /boot symlink for boot pool..." 1099 f_eval_catch $funcname ln "$LN_SF" "$bootpool_name/boot" \ 1100 $BSDINSTALL_CHROOT/boot || return $FAILURE 1101 fi 1102 1103 # Set bootfs property 1104 local zroot_bootfs="$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME" 1105 f_dprintf "$funcname: Setting bootfs property..." 1106 f_eval_catch $funcname zpool "$ZPOOL_SET" \ 1107 "bootfs=\"$zroot_name/$zroot_bootfs\"" "$zroot_name" || 1108 return $FAILURE 1109 1110 # Export the pool(s) 1111 f_dprintf "$funcname: Temporarily exporting ZFS pool(s)..." 1112 f_eval_catch $funcname zpool "$ZPOOL_EXPORT" "$zroot_name" || 1113 return $FAILURE 1114 if [ "$ZFSBOOT_BOOT_POOL" ]; then 1115 f_eval_catch $funcname zpool "$ZPOOL_EXPORT" \ 1116 "$bootpool_name" || return $FAILURE 1117 fi 1118 1119 # Destroy the gnop devices (if enabled) 1120 for disk in ${ZFSBOOT_GNOP_4K_FORCE_ALIGN:+$disks}; do 1121 if [ "$ZFSBOOT_BOOT_POOL" ]; then 1122 f_eval_catch -d $funcname gnop "$GNOP_DESTROY" \ 1123 $disk$bootpart.nop 1124 fi 1125 if [ ! "$ZFSBOOT_GELI_ENCRYPTION" ]; then 1126 f_eval_catch -d $funcname gnop "$GNOP_DESTROY" \ 1127 $disk$targetpart.nop 1128 fi 1129 done 1130 1131 # MBR boot loader touch-up 1132 if [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then 1133 f_dprintf "$funcname: Updating MBR boot loader on disks..." 1134 # Stick the ZFS boot loader in the "convienient hole" after 1135 # the ZFS internal metadata 1136 for disk in $disks; do 1137 f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ 1138 /boot/zfsboot /dev/$disk$bootpart \ 1139 "skip=1 seek=1024" || return $FAILURE 1140 done 1141 fi 1142 1143 # Re-import the ZFS pool(s) 1144 f_dprintf "$funcname: Re-importing ZFS pool(s)..." 1145 f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ 1146 "-o altroot=\"$BSDINSTALL_CHROOT\"" "$zroot_name" || 1147 return $FAILURE 1148 if [ "$ZFSBOOT_BOOT_POOL" ]; then 1149 f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ 1150 "-o altroot=\"$BSDINSTALL_CHROOT\"" \ 1151 "$bootpool_name" || return $FAILURE 1152 fi 1153 1154 # While this is apparently not needed, it seems to help MBR 1155 f_dprintf "$funcname: Configuring zpool.cache for zroot..." 1156 f_eval_catch $funcname mkdir "$MKDIR_P" $BSDINSTALL_CHROOT/boot/zfs || 1157 return $FAILURE 1158 f_eval_catch $funcname zpool "$ZPOOL_SET" \ 1159 "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ 1160 "$zroot_name" || return $FAILURE 1161 1162 # Last, but not least... required lines for rc.conf(5)/loader.conf(5) 1163 # NOTE: We later concatenate these into their destination 1164 f_dprintf "%s: Configuring rc.conf(5)/loader.conf(5) additions..." \ 1165 "$funcname" 1166 f_eval_catch $funcname echo "$ECHO_APPEND" 'zfs_enable=\"YES\"' \ 1167 $BSDINSTALL_TMPETC/rc.conf.zfs || return $FAILURE 1168 f_eval_catch $funcname echo "$ECHO_APPEND" 'zfs_load=\"YES\"' \ 1169 $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE 1170 f_eval_catch $funcname echo "$ECHO_APPEND" \ 1171 'kern.geom.label.disk_ident.enable=\"0\"' \ 1172 $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE 1173 1174 # We're all done unless we should go on for boot pool 1175 [ "$ZFSBOOT_BOOT_POOL" ] || return $SUCCESS 1176 1177 # Set cachefile for boot pool so it auto-imports at system start 1178 f_dprintf "$funcname: Configuring zpool.cache for boot pool..." 1179 f_eval_catch $funcname zpool "$ZPOOL_SET" \ 1180 "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ 1181 "$bootpool_name" || return $FAILURE 1182 1183 # Some additional geli(8) requirements for loader.conf(5) 1184 for option in \ 1185 'zpool_cache_load=\"YES\"' \ 1186 'zpool_cache_type=\"/boot/zfs/zpool.cache\"' \ 1187 'zpool_cache_name=\"/boot/zfs/zpool.cache\"' \ 1188 ; do 1189 f_eval_catch $funcname echo "$ECHO_APPEND" "$option" \ 1190 $BSDINSTALL_TMPBOOT/loader.conf.zfs || 1191 return $FAILURE 1192 done 1193 f_eval_catch $funcname printf "$PRINTF_CONF" vfs.root.mountfrom \ 1194 "\"zfs:$zroot_name/$zroot_bootfs\"" \ 1195 $BSDINSTALL_TMPBOOT/loader.conf.root || return $FAILURE 1196 1197 # We're all done unless we should go on to do encryption 1198 [ "$ZFSBOOT_GELI_ENCRYPTION" ] || return $SUCCESS 1199 1200 # 1201 # Configure geli(8)-based encryption 1202 # 1203 f_dprintf "$funcname: Configuring disk encryption..." 1204 f_eval_catch $funcname echo "$ECHO_APPEND" 'aesni_load=\"YES\"' \ 1205 $BSDINSTALL_TMPBOOT/loader.conf.aesni || return $FAILURE 1206 f_eval_catch $funcname echo "$ECHO_APPEND" 'geom_eli_load=\"YES\"' \ 1207 $BSDINSTALL_TMPBOOT/loader.conf.geli || return $FAILURE 1208 for disk in $disks; do 1209 f_eval_catch $funcname printf "$PRINTF_CONF" \ 1210 geli_%s_keyfile0_load "$disk$targetpart YES" \ 1211 $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || 1212 return $FAILURE 1213 f_eval_catch $funcname printf "$PRINTF_CONF" \ 1214 geli_%s_keyfile0_type \ 1215 "$disk$targetpart $disk$targetpart:geli_keyfile0" \ 1216 $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || 1217 return $FAILURE 1218 f_eval_catch $funcname printf "$PRINTF_CONF" \ 1219 geli_%s_keyfile0_name \ 1220 "$disk$targetpart \"$ZFSBOOT_GELI_KEY_FILE\"" \ 1221 $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || 1222 return $FAILURE 1223 done 1224 1225 return $SUCCESS 1226} 1227 1228# dialog_menu_diskinfo 1229# 1230# Prompt the user to select a disk and then provide detailed info on it. 1231# 1232dialog_menu_diskinfo() 1233{ 1234 local disk 1235 1236 # 1237 # Break from loop when user cancels disk selection 1238 # 1239 while :; do 1240 disk=$( msg_cancel="$msg_back" f_device_menu \ 1241 "$DIALOG_TITLE" "$msg_select_a_disk_device" "" \ 1242 $DEVICE_TYPE_DISK 2>&1 ) || break 1243 1244 # Show gpart(8) `show' and camcontrol(8) `inquiry' data 1245 f_show_msg "$msg_detailed_disk_info" \ 1246 "$disk" "$( gpart show $disk 2> /dev/null )" \ 1247 "$disk" "$( camcontrol inquiry $disk 2> /dev/null )" \ 1248 "$disk" "$( camcontrol identify $disk 2> /dev/null )" 1249 done 1250 1251 return $SUCCESS 1252} 1253 1254############################################################ MAIN 1255 1256# 1257# Initialize 1258# 1259f_dialog_title "$msg_zfs_configuration" 1260f_dialog_backtitle "$msg_freebsd_installer" 1261 1262# User may have specifically requested ZFS-related operations be interactive 1263! f_interactive && f_zfsinteractive && unset $VAR_NONINTERACTIVE 1264 1265# 1266# Debugging 1267# 1268f_dprintf "BSDINSTALL_CHROOT=[%s]" "$BSDINSTALL_CHROOT" 1269f_dprintf "BSDINSTALL_TMPETC=[%s]" "$BSDINSTALL_TMPETC" 1270f_dprintf "FSTAB_FMT=[%s]" "$FSTAB_FMT" 1271 1272# 1273# Loop over the main menu until we've accomplished what we came here to do 1274# 1275while :; do 1276 if ! f_interactive; then 1277 retval=$DIALOG_OK 1278 mtag=">>> $msg_install" 1279 else 1280 dialog_menu_main 1281 retval=$? 1282 f_dialog_menutag_fetch mtag 1283 fi 1284 1285 f_dprintf "retval=%u mtag=[%s]" $retval "$mtag" 1286 [ $retval -eq $DIALOG_OK ] || f_die 1287 1288 case "$mtag" in 1289 ">>> $msg_install") 1290 # 1291 # First, validate the user's selections 1292 # 1293 1294 # Make sure they gave us a name for the pool 1295 if [ ! "$ZFSBOOT_POOL_NAME" ]; then 1296 f_dprintf "Pool name cannot be empty." 1297 f_show_err "$msg_pool_name_cannot_be_empty" 1298 continue 1299 fi 1300 1301 # Validate vdev type against number of disks selected/scripted 1302 # (also validates that ZFSBOOT_DISKS are real [probed] disks) 1303 # NB: dialog_menu_layout supports running non-interactively 1304 dialog_menu_layout || continue 1305 1306 # Make sure each disk will be at least 50% ZFS 1307 if f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize && 1308 f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize 1309 then 1310 minsize=$swapsize teeny_disks= 1311 [ "$ZFSBOOT_BOOT_POOL" ] && 1312 minsize=$(( $minsize + $bootsize )) 1313 for disk in $ZFSBOOT_DISKS; do 1314 device_$disk get capacity disksize || continue 1315 disksize=$(( $disksize - $minsize )) 1316 [ $disksize -lt $minsize ] && 1317 teeny_disks="$teeny_disks $disk" 1318 done 1319 if [ "$teeny_disks" ]; then 1320 f_dprintf "swapsize=[%s] bootsize[%s] %s" \ 1321 "$ZFSBOOT_SWAP_SIZE" \ 1322 "$ZFSBOOT_BOOT_POOL_SIZE" \ 1323 "minsize=[$minsize]" 1324 f_dprintf "These disks are too small: %s" \ 1325 "$teeny_disks" 1326 f_show_err "$msg_these_disks_are_too_small" \ 1327 "$ZFSBOOT_SWAP_SIZE" \ 1328 "$ZFSBOOT_BOOT_POOL_SIZE" \ 1329 "$teeny_disks" 1330 continue 1331 fi 1332 fi 1333 1334 # 1335 # Last Chance! 1336 # 1337 if f_interactive; then 1338 dialog_last_chance $ZFSBOOT_DISKS || continue 1339 fi 1340 1341 # 1342 # Let's do this 1343 # 1344 1345 vdev_type="$ZFSBOOT_VDEV_TYPE" 1346 1347 # Blank the vdev type for the default layout 1348 [ "$vdev_type" = "stripe" ] && vdev_type= 1349 1350 zfs_create_boot "$ZFSBOOT_POOL_NAME" \ 1351 "$vdev_type" $ZFSBOOT_DISKS || continue 1352 1353 break # to success 1354 ;; 1355 ?" $msg_pool_type_disks") 1356 ZFSBOOT_CONFIRM_LAYOUT=1 1357 dialog_menu_layout 1358 # User has poked settings, disable later confirmation 1359 ZFSBOOT_CONFIRM_LAYOUT= 1360 ;; 1361 "- $msg_rescan_devices") f_device_rescan ;; 1362 "- $msg_disk_info") dialog_menu_diskinfo ;; 1363 ?" $msg_pool_name") 1364 # Prompt the user to input/change the name for the new pool 1365 f_dialog_input input \ 1366 "$msg_please_enter_a_name_for_your_zpool" \ 1367 "$ZFSBOOT_POOL_NAME" && 1368 ZFSBOOT_POOL_NAME="$input" 1369 ;; 1370 ?" $msg_force_4k_sectors") 1371 # Toggle the variable referenced both by the menu and later 1372 if [ "$ZFSBOOT_GNOP_4K_FORCE_ALIGN" ]; then 1373 ZFSBOOT_GNOP_4K_FORCE_ALIGN= 1374 else 1375 ZFSBOOT_GNOP_4K_FORCE_ALIGN=1 1376 fi 1377 ;; 1378 ?" $msg_encrypt_disks") 1379 # Toggle the variable referenced both by the menu and later 1380 if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then 1381 ZFSBOOT_GELI_ENCRYPTION= 1382 else 1383 ZFSBOOT_GNOP_4K_FORCE_ALIGN=1 1384 ZFSBOOT_GELI_ENCRYPTION=1 1385 fi 1386 ;; 1387 ?" $msg_partition_scheme") 1388 # Toggle between GPT and MBR 1389 if [ "$ZFSBOOT_PARTITION_SCHEME" = GPT ]; then 1390 ZFSBOOT_PARTITION_SCHEME=MBR 1391 else 1392 ZFSBOOT_PARTITION_SCHEME=GPT 1393 fi 1394 ;; 1395 ?" $msg_swap_size") 1396 # Prompt the user to input/change the swap size for each disk 1397 f_dialog_input input \ 1398 "$msg_please_enter_amount_of_swap_space" \ 1399 "$ZFSBOOT_SWAP_SIZE" && 1400 ZFSBOOT_SWAP_SIZE="${input:-0}" 1401 ;; 1402 esac 1403done 1404 1405return $SUCCESS 1406 1407################################################################################ 1408# END 1409################################################################################ 1410