1#!/bin/sh 2#- 3# Copyright (c) 2011 Nathan Whitehorn 4# Copyright (c) 2013-2016 Devin Teske 5# All rights reserved. 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions 9# are met: 10# 1. Redistributions of source code must retain the above copyright 11# notice, this list of conditions and the following disclaimer. 12# 2. Redistributions in binary form must reproduce the above copyright 13# notice, this list of conditions and the following disclaimer in the 14# documentation and/or other materials provided with the distribution. 15# 16# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26# SUCH DAMAGE. 27# 28# $FreeBSD$ 29# 30############################################################ INCLUDES 31 32BSDCFG_SHARE="/usr/share/bsdconfig" 33. $BSDCFG_SHARE/common.subr || exit 1 34f_include $BSDCFG_SHARE/dialog.subr 35f_dialog_backtitle "FreeBSD Installer" 36 37############################################################ FUNCTIONS 38 39country_set() 40{ 41 local error_str iface_up ifconfig_args= 42 43 # 44 # Setup what was selected 45 # NB: Do not change order of arguments (or regdomain will be ignored) 46 # 47 [ "$2" ] && ifconfig_args="$ifconfig_args country $2" 48 [ "$1" ] && ifconfig_args="$ifconfig_args regdomain $1" 49 [ "$ifconfig_args" ] || return $SUCCESS # Nothing to do 50 ifconfig_args="${ifconfig_args# }" 51 52 # Regdomain/country cannot be applied while interface is running 53 iface_up=$( ifconfig -lu | grep -w "$WLAN_IFACE" ) 54 [ "$iface_up" ] && ifconfig "$WLAN_IFACE" down 55 error_str=$( ifconfig "$WLAN_IFACE" $ifconfig_args 2>&1 | 56 sed -e 's/ifconfig: //' ) 57 if [ "$iface_up" ]; then 58 # Restart wpa_supplicant(8) (should not fail). 59 wpa_supplicant -B -i "$WLAN_IFACE" -c \ 60 "$BSDINSTALL_TMPETC/wpa_supplicant.conf" 61 fi 62 if [ "$error_str" ]; then 63 $DIALOG \ 64 --title "$msg_error" \ 65 --backtitle "$DIALOG_BACKTITLE" \ 66 --yes-label Change \ 67 --no-label Ignore \ 68 --yesno \ 69 "Error while applying chosen settings ($error_str)" \ 70 0 0 || return $SUCCESS # Skip 71 return $FAILURE # Restart 72 else 73 awk 'sub(/^\t\t/,"")||1' \ 74 > "$BSDINSTALL_TMPETC/rc.conf.net.wlan" <<-EOF 75 create_args_$WLAN_IFACE="$ifconfig_args" 76 EOF 77 fi 78 79 return $SUCCESS 80} 81 82dialog_country_select() 83{ 84 local input regdomains countries regdomain country prompt 85 local no_default="<not selected>" 86 local default_regdomain="${1:-$no_default}" 87 local default_country="${2:-$no_default}" 88 89 # 90 # Parse available countries/regdomains 91 # 92 input=$( ifconfig "$WLAN_IFACE" list countries | sed -e 's/DEBUG//gi' ) 93 regdomains=$( echo "$input" | awk ' 94 sub(/.*domains:/, ""), /[^[:alnum:][[:space:]]/ { 95 n = split($0, domains) 96 for (i = 1; i <= n; i++) 97 printf "'\''%s'\'' '\'\''", domains[i] 98 } 99 ' | sort ) 100 countries=$( echo "$input" | awk ' 101 sub(/Country codes:/, ""), sub(/Regulatory.*/, "") { 102 while (match($0, /[[:upper:]][[:upper:][:digit:]] /)) { 103 country = substr($0, RSTART) 104 sub(/ [[:upper:]][[:upper:][:digit:]].*/, "", country) 105 code = substr(country, 1, 2) 106 desc = substr(country, 4) 107 sub(/[[:space:]]*$/, "", desc) 108 printf "'\''%s'\'' '\''%s'\''\n", code, desc 109 $0 = substr($0, RSTART + RLENGTH) 110 } 111 } 112 ' | sort ) 113 114 f_dialog_title "Regdomain selection" 115 prompt="Select your regdomain." 116 eval f_dialog_menu_size height width rows \ 117 \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ 118 \"\$prompt\" \"\" $regdomains 119 regdomain=$( eval $DIALOG \ 120 --title \"\$DIALOG_TITLE\" \ 121 --backtitle \"\$DIALOG_BACKTITLE\" \ 122 --cancel-label \"\$msg_skip\" \ 123 --default-item \"\$default_regdomain\" \ 124 --menu \"\$prompt\" \ 125 $height $width $rows \ 126 $regdomains \ 127 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 128 ) 129 f_dialog_data_sanitize regdomain 130 131 f_dialog_title "Country selection" 132 prompt="Select your country." 133 eval f_dialog_menu_size height width rows \ 134 \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ 135 \"\$prompt\" \"\" $countries 136 country=$( eval $DIALOG \ 137 --title \"\$DIALOG_TITLE\" \ 138 --backtitle \"\$DIALOG_BACKTITLE\" \ 139 --cancel-label \"\$msg_skip\" \ 140 --default-item \"\$default_country\" \ 141 --menu \"\$prompt\" \ 142 $height $width $rows \ 143 $countries \ 144 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 145 ) 146 f_dialog_data_sanitize country 147 148 country_set "$regdomain" "$country" 149} 150 151############################################################ MAIN 152 153: > "$BSDINSTALL_TMPETC/wpa_supplicant.conf" 154chmod 0600 "$BSDINSTALL_TMPETC/wpa_supplicant.conf" 155 156cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" << EOF 157ctrl_interface=/var/run/wpa_supplicant 158eapol_version=2 159ap_scan=1 160fast_reauth=1 161 162EOF 163 164# 165# Try to reach wpa_supplicant. If it isn't running and we can modify the 166# existing system, start it. Otherwise, fail. 167# 168if ! wpa_cli ping > /dev/null 2>&1; then 169 ([ "$BSDINSTALL_CONFIGCURRENT" ] && 170 wpa_supplicant -B -i $1 -c "$BSDINSTALL_TMPETC/wpa_supplicant.conf") || 171 $DIALOG --backtitle "$DIALOG_BACKTITLE" --title "$msg_error" --msgbox \ 172 "Could not start wpa_supplicant!" 0 0; exit 1 || exit 1 173 174 if ! wpa_cli ping > /dev/null 2>&1 && [ ! "$BSDINSTALL_CONFIGCURRENT" ]; then 175 $DIALOG \ 176 --title "$msg_error" \ 177 --backtitle "$DIALOG_BACKTITLE" \ 178 --msgbox "Wireless cannot be configured without making changes to the local system!" \ 179 0 0 180 exit 1 181 fi 182fi 183 184 185# 186# There is no way to check country/regdomain without (possible) 187# interface state modification 188# 189if [ "$BSDINSTALL_CONFIGCURRENT" ]; then 190 # Get current country/regdomain for selected interface 191 WLAN_IFACE=$( wpa_cli ifname | tail -1 ) 192 INPUT=$( ifconfig "$WLAN_IFACE" list regdomain | head -1 ) 193 DEF_REGDOMAIN=$( echo "$INPUT" | cut -w -f 2 ) 194 DEF_COUNTRY=$( echo "$INPUT" | cut -w -f 4 ) 195 [ "$DEF_REGDOMAIN" = 0 ] && DEF_REGDOMAIN="<not selected>" 196 [ "$DEF_COUNTRY" = 0 ] && DEF_COUNTRY="<not selected>" 197 f_dialog_title "Regdomain/country" 198 $DIALOG \ 199 --title "$DIALOG_TITLE" \ 200 --backtitle "$DIALOG_BACKTITLE" \ 201 --yesno "Change regdomain/country (now $DEF_REGDOMAIN/$DEF_COUNTRY)?" \ 202 0 0 203 if [ $? -eq 0 ]; then 204 while :; do 205 dialog_country_select "$DEF_REGDOMAIN" "$DEF_COUNTRY" 206 if [ $? -eq $SUCCESS ]; then 207 break 208 fi 209 done 210 fi 211fi 212 213while :; do 214 SCANSSID=0 215 output=$( wpa_cli scan 2>&1 ) 216 f_dprintf "%s" "$output" 217 f_dialog_title "Scanning" 218 $DIALOG \ 219 --title "$DIALOG_TITLE" \ 220 --backtitle "$DIALOG_BACKTITLE" \ 221 --ok-label "$msg_skip" \ 222 --pause "Waiting 5 seconds to scan for wireless networks..." \ 223 9 40 5 || exit 1 224 225 SCAN_RESULTS=$( wpa_cli scan_results ) 226 NETWORKS=$( echo "$SCAN_RESULTS" | awk -F '\t' ' 227 /..:..:..:..:..:../ && $5 { printf("\"%s\"\t%s\n", $5, $4) } 228 ' | sort | uniq ) 229 230 if [ ! "$NETWORKS" ]; then 231 f_dialog_title "$msg_error" 232 $DIALOG \ 233 --title "$DIALOG_TITLE" \ 234 --backtitle "$DIALOG_BACKTITLE" \ 235 --yesno "No wireless networks were found. Rescan?" \ 236 0 0 && continue 237 exit 1 238 fi 239 240 f_dialog_title "Network Selection" 241 NETWORK=$( sh -c "$DIALOG \ 242 --title \"$DIALOG_TITLE\" \ 243 --backtitle \"$DIALOG_BACKTITLE\" \ 244 --extra-button \ 245 --extra-label \"Rescan\" \ 246 --menu \"Select a wireless network to connect to.\" \ 247 0 0 0 \ 248 $( echo $NETWORKS | tr '\n' ' ' )" \ 249 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 250 ) 251 retval=$? 252 f_dialog_data_sanitize NETWORK 253 case $retval in 254 $DIALOG_OK) break ;; 255 $DIALOG_CANCEL) 256 # here we ask if the user wants to select the network manually 257 f_dialog_title "Network Selection" 258 f_yesno "Do you want to select the network manually?" || exit 1 259 f_dialog_input NETWORK "Enter SSID" || exit 1 260 ENCRYPTION=$( $DIALOG \ 261 --title "$DIALOG_TITLE" \ 262 --backtitle "$DIALOG_BACKTITLE" \ 263 --menu "Select encryption type" \ 264 0 0 0 \ 265 "1 WPA/WPA2 PSK" "" \ 266 "2 WPA/WPA2 EAP" "" \ 267 "3 WEP" "" \ 268 "0 None" "" \ 269 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 270 ) || exit 1 271 SCANSSID=1 272 break 273 ;; 274 $DIALOG_EXTRA) # Rescan 275 ;; 276 esac 277done 278 279[ "$ENCRYPTION" ] || ENCRYPTION=$( echo "$NETWORKS" | 280 awk -F '\t' "/^\"$NETWORK\"\t/ { printf(\"%s\n\", \\\$2 ) }" ) 281 282if echo $ENCRYPTION | grep -q 'PSK'; then 283 PASS=$( $DIALOG \ 284 --title "WPA Setup" \ 285 --backtitle "$DIALOG_BACKTITLE" \ 286 --insecure \ 287 --mixedform "" \ 288 0 0 0 \ 289 "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ 290 "Password" 2 0 "" 2 12 15 63 1 \ 291 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 292 ) || exec "$0" "$@" 293 awk 'sub(/^\t/,"")||1' \ 294 >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF 295 network={ 296 ssid="$NETWORK" 297 scan_ssid=$SCANSSID 298 psk="$PASS" 299 priority=5 300 } 301 EOF 302elif echo $ENCRYPTION | grep -q EAP; then 303 USERPASS=$( $DIALOG \ 304 --title "WPA-Enterprise Setup" \ 305 --backtitle "$DIALOG_BACKTITLE" \ 306 --insecure \ 307 --mixedform "" \ 308 0 0 0 \ 309 "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ 310 "Username" 2 0 "" 2 12 25 63 0 \ 311 "Password" 3 0 "" 3 12 25 63 1 \ 312 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 313 ) || exec "$0" "$@" 314 awk 'sub(/^\t/,"")||1' \ 315 >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF 316 network={ 317 ssid="$NETWORK" 318 scan_ssid=$SCANSSID 319 key_mgmt=WPA-EAP$( 320 echo "$USERPASS" | awk ' 321 NR == 1 { printf "\n\t\tidentity=\"%s\"", $1 } 322 NR == 2 { printf "\n\t\tpassword=\"%s\"", $1 } 323 ' ) 324 priority=5 325 } 326 EOF 327elif echo $ENCRYPTION | grep -q WEP; then 328 WEPKEY=$( $DIALOG \ 329 --title "WEP Setup" \ 330 --backtitle "$DIALOG_BACKTITLE" \ 331 --insecure \ 332 --mixedform "" \ 333 0 0 0 \ 334 "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ 335 "WEP Key 0" 2 0 "" 2 12 15 0 1 \ 336 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 337 ) || exec "$0" "$@" 338 awk 'sub(/^\t/,"")||1' \ 339 >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF 340 network={ 341 ssid="$NETWORK" 342 scan_ssid=$SCANSSID 343 key_mgmt=NONE 344 wep_key0="$WEPKEY" 345 wep_tx_keyidx=0 346 priority=5 347 } 348 EOF 349else # Open 350 awk 'sub(/^\t/,"")||1' \ 351 >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF 352 network={ 353 ssid="$NETWORK" 354 scan_ssid=$SCANSSID 355 key_mgmt=NONE 356 priority=5 357 } 358 EOF 359fi 360 361# Connect to any open networks policy 362cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" << EOF 363network={ 364 priority=0 365 key_mgmt=NONE 366} 367EOF 368 369# Bring up new network 370if [ "$BSDINSTALL_CONFIGCURRENT" ]; then 371 output=$( wpa_cli reconfigure 2>&1 ) 372 f_dprintf "%s" "$output" 373fi 374 375exit $SUCCESS 376 377################################################################################ 378# END 379################################################################################ 380