xref: /freebsd/sys/powerpc/include/spr.h (revision b52b9d56d4e96089873a75f9e29062eec19fabba)
1 /*
2  * Copyright (c) 2001 The NetBSD Foundation, Inc.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *        This product includes software developed by the NetBSD
16  *        Foundation, Inc. and its contributors.
17  * 4. Neither the name of The NetBSD Foundation nor the names of its
18  *    contributors may be used to endorse or promote products derived
19  *    from this software without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  *
33  * $FreeBSD$
34  */
35 #ifndef _POWERPC_SPR_H_
36 #define	_POWERPC_SPR_H_
37 
38 #ifndef _LOCORE
39 #define	mtspr(reg, val)							\
40 	__asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val))
41 #define	mfspr(reg)							\
42 	( { u_int32_t val;						\
43 	  __asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg));	\
44 	  val; } )
45 #endif /* _LOCORE */
46 
47 /*
48  * Special Purpose Register declarations.
49  *
50  * The first column in the comments indicates which PowerPC
51  * architectures the SPR is valid on - 4 for 4xx series,
52  * 6 for 6xx/7xx series and 8 for 8xx and 8xxx series.
53  */
54 
55 #define	SPR_MQ			0x000	/* .6. 601 MQ register */
56 #define	SPR_XER			0x001	/* 468 Fixed Point Exception Register */
57 #define	SPR_RTCU_R		0x004	/* .6. 601 RTC Upper - Read */
58 #define	SPR_RTCL_R		0x005	/* .6. 601 RTC Lower - Read */
59 #define	SPR_LR			0x008	/* 468 Link Register */
60 #define	SPR_CTR			0x009	/* 468 Count Register */
61 #define	SPR_DSISR		0x012	/* .68 DSI exception source */
62 #define	  DSISR_DIRECT		  0x80000000 /* Direct-store error exception */
63 #define	  DSISR_NOTFOUND	  0x40000000 /* Translation not found */
64 #define	  DSISR_PROTECT		  0x08000000 /* Memory access not permitted */
65 #define	  DSISR_INVRX		  0x04000000 /* Reserve-indexed insn direct-store access */
66 #define	  DSISR_STORE		  0x02000000 /* Store operation */
67 #define	  DSISR_DABR		  0x00400000 /* DABR match */
68 #define	  DSISR_SEGMENT		  0x00200000 /* XXX; not in 6xx PEM */
69 #define	  DSISR_EAR		  0x00100000 /* eciwx/ecowx && EAR[E] == 0 */
70 #define	SPR_DAR			0x013	/* .68 Data Address Register */
71 #define	SPR_RTCU_W		0x014	/* .6. 601 RTC Upper - Write */
72 #define	SPR_RTCL_W		0x015	/* .6. 601 RTC Lower - Write */
73 #define	SPR_DEC			0x016	/* .68 DECrementer register */
74 #define	SPR_SDR1		0x019	/* .68 Page table base address register */
75 #define	SPR_SRR0		0x01a	/* 468 Save/Restore Register 0 */
76 #define	SPR_SRR1		0x01b	/* 468 Save/Restore Register 1 */
77 #define	SPR_USPRG0		0x100	/* 4.. User SPR General 0 */
78 #define	SPR_SPRG0		0x110	/* 468 SPR General 0 */
79 #define	SPR_SPRG1		0x111	/* 468 SPR General 1 */
80 #define	SPR_SPRG2		0x112	/* 468 SPR General 2 */
81 #define	SPR_SPRG3		0x113	/* 468 SPR General 3 */
82 #define	SPR_SPRG4		0x114	/* 4.. SPR General 4 */
83 #define	SPR_SPRG5		0x115	/* 4.. SPR General 5 */
84 #define	SPR_SPRG6		0x116	/* 4.. SPR General 6 */
85 #define	SPR_SPRG7		0x117	/* 4.. SPR General 7 */
86 #define	SPR_EAR			0x11a	/* .68 External Access Register */
87 #define	SPR_TBL			0x11c	/* 468 Time Base Lower */
88 #define	SPR_TBU			0x11d	/* 468 Time Base Upper */
89 #define	SPR_PVR			0x11f	/* 468 Processor Version Register */
90 #define   PVR_MPC601		  0x0001
91 #define   PVR_MPC603		  0x0003
92 #define   PVR_MPC604		  0x0004
93 #define   PVR_MPC602		  0x0005
94 #define   PVR_MPC603e		  0x0006
95 #define   PVR_MPC603ev		  0x0007
96 #define   PVR_MPC750		  0x0008
97 #define   PVR_MPC604ev		  0x0009
98 #define   PVR_MPC7400		  0x000c
99 #define   PVR_MPC620		  0x0014
100 #define   PVR_MPC860		  0x0050
101 #define   PVR_MPC8240		  0x0081
102 #define   PVR_MPC7450		  0x8000
103 #define   PVR_MPC7455		  0x8001
104 #define   PVR_MPC7410		  0x800c
105 #define   PVR_IBM405GP		  0x4011
106 #define   PVR_IBM405L		  0x4161
107 #define	SPR_IBAT0U		0x210	/* .68 Instruction BAT Reg 0 Upper */
108 #define	SPR_IBAT0L		0x211	/* .68 Instruction BAT Reg 0 Lower */
109 #define	SPR_IBAT1U		0x212	/* .68 Instruction BAT Reg 1 Upper */
110 #define	SPR_IBAT1L		0x213	/* .68 Instruction BAT Reg 1 Lower */
111 #define	SPR_IBAT2U		0x214	/* .68 Instruction BAT Reg 2 Upper */
112 #define	SPR_IBAT2L		0x215	/* .68 Instruction BAT Reg 2 Lower */
113 #define	SPR_IBAT3U		0x216	/* .68 Instruction BAT Reg 3 Upper */
114 #define	SPR_IBAT3L		0x217	/* .68 Instruction BAT Reg 3 Lower */
115 #define	SPR_DBAT0U		0x218	/* .68 Data BAT Reg 0 Upper */
116 #define	SPR_DBAT0L		0x219	/* .68 Data BAT Reg 0 Lower */
117 #define	SPR_DBAT1U		0x21a	/* .68 Data BAT Reg 1 Upper */
118 #define	SPR_DBAT1L		0x21b	/* .68 Data BAT Reg 1 Lower */
119 #define	SPR_DBAT2U		0x21c	/* .68 Data BAT Reg 2 Upper */
120 #define	SPR_DBAT2L		0x21d	/* .68 Data BAT Reg 2 Lower */
121 #define	SPR_DBAT3U		0x21e	/* .68 Data BAT Reg 3 Upper */
122 #define	SPR_DBAT3L		0x21f	/* .68 Data BAT Reg 3 Lower */
123 #define	SPI_IBAT4U		0x230	/* .6. Instruction BAT Reg 4 Upper */
124 #define	SPI_IBAT4L		0x231	/* .6. Instruction BAT Reg 4 Lower */
125 #define	SPI_IBAT5U		0x232	/* .6. Instruction BAT Reg 5 Upper */
126 #define	SPI_IBAT5L		0x233	/* .6. Instruction BAT Reg 5 Lower */
127 #define	SPI_IBAT6U		0x234	/* .6. Instruction BAT Reg 6 Upper */
128 #define	SPI_IBAT6L		0x235	/* .6. Instruction BAT Reg 6 Lower */
129 #define	SPI_IBAT7U		0x236	/* .6. Instruction BAT Reg 7 Upper */
130 #define	SPI_IBAT7L		0x237	/* .6. Instruction BAT Reg 7 Lower */
131 #define	SPI_DBAT4U		0x238	/* .6. Data BAT Reg 4 Upper */
132 #define	SPI_DBAT4L		0x239	/* .6. Data BAT Reg 4 Lower */
133 #define	SPI_DBAT5U		0x23a	/* .6. Data BAT Reg 5 Upper */
134 #define	SPI_DBAT5L		0x23b	/* .6. Data BAT Reg 5 Lower */
135 #define	SPI_DBAT6U		0x23c	/* .6. Data BAT Reg 6 Upper */
136 #define	SPI_DBAT6L		0x23d	/* .6. Data BAT Reg 6 Lower */
137 #define	SPI_DBAT7U		0x23e	/* .6. Data BAT Reg 7 Upper */
138 #define	SPI_DBAT7L		0x23f	/* .6. Data BAT Reg 7 Lower */
139 #define	SPR_UMMCR2		0x3a0	/* .6. User Monitor Mode Control Register 2 */
140 #define	SPR_UMMCR0		0x3a8	/* .6. User Monitor Mode Control Register 0 */
141 #define	SPR_USIA		0x3ab	/* .6. User Sampled Instruction Address */
142 #define	SPR_UMMCR1		0x3ac	/* .6. User Monitor Mode Control Register 1 */
143 #define	SPR_ZPR			0x3b0	/* 4.. Zone Protection Register */
144 #define	SPR_MMCR2		0x3b0	/* .6. Monitor Mode Control Register 2 */
145 #define	 SPR_MMCR2_THRESHMULT_32  0x80000000 /* Multiply MMCR0 threshold by 32 */
146 #define	 SPR_MMCR2_THRESHMULT_2	  0x00000000 /* Multiply MMCR0 threshold by 2 */
147 #define	SPR_PID			0x3b1	/* 4.. Process ID */
148 #define	SPR_PMC5		0x3b1	/* .6. Performance Counter Register 5 */
149 #define	SPR_PMC6		0x3b2	/* .6. Performance Counter Register 6 */
150 #define	SPR_CCR0		0x3b3	/* 4.. Core Configuration Register 0 */
151 #define	SPR_IAC3		0x3b4	/* 4.. Instruction Address Compare 3 */
152 #define	SPR_IAC4		0x3b5	/* 4.. Instruction Address Compare 4 */
153 #define	SPR_DVC1		0x3b6	/* 4.. Data Value Compare 1 */
154 #define	SPR_DVC2		0x3b7	/* 4.. Data Value Compare 2 */
155 #define	SPR_MMCR0		0x3b8	/* .6. Monitor Mode Control Register 0 */
156 #define	  SPR_MMCR0_FC		  0x80000000 /* Freeze counters */
157 #define	  SPR_MMCR0_FCS		  0x40000000 /* Freeze counters in supervisor mode */
158 #define	  SPR_MMCR0_FCP		  0x20000000 /* Freeze counters in user mode */
159 #define	  SPR_MMCR0_FCM1	  0x10000000 /* Freeze counters when mark=1 */
160 #define	  SPR_MMCR0_FCM0	  0x08000000 /* Freeze counters when mark=0 */
161 #define	  SPR_MMCR0_PMXE	  0x04000000 /* Enable PM interrupt */
162 #define	  SPR_MMCR0_FCECE	  0x02000000 /* Freeze counters after event */
163 #define	  SPR_MMCR0_TBSEL_15	  0x01800000 /* Count bit 15 of TBL */
164 #define	  SPR_MMCR0_TBSEL_19	  0x01000000 /* Count bit 19 of TBL */
165 #define	  SPR_MMCR0_TBSEL_23	  0x00800000 /* Count bit 23 of TBL */
166 #define	  SPR_MMCR0_TBSEL_31	  0x00000000 /* Count bit 31 of TBL */
167 #define	  SPR_MMCR0_TBEE	  0x00400000 /* Time-base event enable */
168 #define	  SPR_MMCRO_THRESHOLD(x)  ((x) << 16) /* Threshold value */
169 #define	  SPR_MMCR0_PMC1CE	  0x00008000 /* PMC1 condition enable */
170 #define	  SPR_MMCR0_PMCNCE	  0x00004000 /* PMCn condition enable */
171 #define	  SPR_MMCR0_TRIGGER	  0x00002000 /* Trigger */
172 #define	  SPR_MMCR0_PMC1SEL(x)	  ((x) << 6) /* PMC1 selector */
173 #define	  SPR_MMCR0_PMC2SEL(x)	  ((x) << 0) /* PMC2 selector */
174 #define	SPR_SGR			0x3b9	/* 4.. Storage Guarded Register */
175 #define	SPR_PMC1		0x3b9	/* .6. Performance Counter Register 1 */
176 #define	SPR_DCWR		0x3ba	/* 4.. Data Cache Write-through Register */
177 #define	SPR_PMC2		0x3ba	/* .6. Performance Counter Register 2 */
178 #define	SPR_SLER		0x3bb	/* 4.. Storage Little Endian Register */
179 #define	SPR_SIA			0x3bb	/* .6. Sampled Instruction Address */
180 #define	SPR_MMCR1		0x3bc	/* .6. Monitor Mode Control Register 2 */
181 #define	  SPR_MMCR1_PMC3SEL(x)	  ((x) << 27) /* PMC 3 selector */
182 #define	  SPR_MMCR1_PMC4SEL(x)	  ((x) << 22) /* PMC 4 selector */
183 #define	  SPR_MMCR1_PMC5SEL(x)	  ((x) << 17) /* PMC 5 selector */
184 #define	  SPR_MMCR1_PMC6SEL(x)	  ((x) << 11) /* PMC 6 selector */
185 
186 #define	SPR_SU0R		0x3bc	/* 4.. Storage User-defined 0 Register */
187 #define	SPR_DBCR1		0x3bd	/* 4.. Debug Control Register 1 */
188 #define	SPR_PMC3		0x3bd	/* .6. Performance Counter Register 3 */
189 #define	SPR_PMC4		0x3be	/* .6. Performance Counter Register 4 */
190 #define	SPR_DMISS		0x3d0	/* .68 Data TLB Miss Address Register */
191 #define	SPR_DCMP		0x3d1	/* .68 Data TLB Compare Register */
192 #define	SPR_HASH1		0x3d2	/* .68 Primary Hash Address Register */
193 #define	SPR_ICDBDR		0x3d3	/* 4.. Instruction Cache Debug Data Register */
194 #define	SPR_HASH2		0x3d3	/* .68 Secondary Hash Address Register */
195 #define	SPR_ESR			0x3d4	/* 4.. Exception Syndrome Register */
196 #define	  ESR_MCI		  0x80000000 /* Machine check - instruction */
197 #define	  ESR_PIL		  0x08000000 /* Program interrupt - illegal */
198 #define	  ESR_PPR		  0x04000000 /* Program interrupt - privileged */
199 #define	  ESR_PTR		  0x02000000 /* Program interrupt - trap */
200 #define	  ESR_DST		  0x00800000 /* Data storage interrupt - store fault */
201 #define	  ESR_DIZ		  0x00800000 /* Data/instruction storage interrupt - zone fault */
202 #define	  ESR_U0F		  0x00008000 /* Data storage interrupt - U0 fault */
203 #define	SPR_IMISS		0x3d4	/* .68 Instruction TLB Miss Address Register */
204 #define	SPR_TLBMISS		0x3d4	/* .6. TLB Miss Address Register */
205 #define	SPR_DEAR		0x3d5	/* 4.. Data Error Address Register */
206 #define	SPR_ICMP		0x3d5	/* .68 Instruction TLB Compare Register */
207 #define	SPR_PTEHI		0x3d5	/* .6. Instruction TLB Compare Register */
208 #define	SPR_EVPR		0x3d6	/* 4.. Exception Vector Prefix Register */
209 #define	SPR_RPA			0x3d6	/* .68 Required Physical Address Register */
210 #define	SPR_PTELO		0x3d6	/* .6. Required Physical Address Register */
211 #define	SPR_TSR			0x3d8	/* 4.. Timer Status Register */
212 #define	  TSR_ENW		  0x80000000 /* Enable Next Watchdog */
213 #define	  TSR_WIS		  0x40000000 /* Watchdog Interrupt Status */
214 #define	  TSR_WRS_MASK		  0x30000000 /* Watchdog Reset Status */
215 #define	  TSR_WRS_NONE		  0x00000000 /* No watchdog reset has occurred */
216 #define	  TSR_WRS_CORE		  0x10000000 /* Core reset was forced by the watchdog */
217 #define	  TSR_WRS_CHIP		  0x20000000 /* Chip reset was forced by the watchdog */
218 #define	  TSR_WRS_SYSTEM	  0x30000000 /* System reset was forced by the watchdog */
219 #define	  TSR_PIS		  0x08000000 /* PIT Interrupt Status */
220 #define	  TSR_FIS		  0x04000000 /* FIT Interrupt Status */
221 #define	SPR_TCR			0x3da	/* 4.. Timer Control Register */
222 #define	  TCR_WP_MASK		  0xc0000000 /* Watchdog Period mask */
223 #define	  TCR_WP_2_17		  0x00000000 /* 2**17 clocks */
224 #define	  TCR_WP_2_21		  0x40000000 /* 2**21 clocks */
225 #define	  TCR_WP_2_25		  0x80000000 /* 2**25 clocks */
226 #define	  TCR_WP_2_29		  0xc0000000 /* 2**29 clocks */
227 #define	  TCR_WRC_MASK		  0x30000000 /* Watchdog Reset Control mask */
228 #define	  TCR_WRC_NONE		  0x00000000 /* No watchdog reset */
229 #define	  TCR_WRC_CORE		  0x10000000 /* Core reset */
230 #define	  TCR_WRC_CHIP		  0x20000000 /* Chip reset */
231 #define	  TCR_WRC_SYSTEM	  0x30000000 /* System reset */
232 #define	  TCR_WIE		  0x08000000 /* Watchdog Interrupt Enable */
233 #define	  TCR_PIE		  0x04000000 /* PIT Interrupt Enable */
234 #define	  TCR_FP_MASK		  0x03000000 /* FIT Period */
235 #define	  TCR_FP_2_9		  0x00000000 /* 2**9 clocks */
236 #define	  TCR_FP_2_13		  0x01000000 /* 2**13 clocks */
237 #define	  TCR_FP_2_17		  0x02000000 /* 2**17 clocks */
238 #define	  TCR_FP_2_21		  0x03000000 /* 2**21 clocks */
239 #define	  TCR_FIE		  0x00800000 /* FIT Interrupt Enable */
240 #define	  TCR_ARE		  0x00400000 /* Auto Reload Enable */
241 #define	SPR_PIT			0x3db	/* 4.. Programmable Interval Timer */
242 #define	SPR_SRR2		0x3de	/* 4.. Save/Restore Register 2 */
243 #define	SPR_SRR3		0x3df	/* 4.. Save/Restore Register 3 */
244 #define	SPR_DBSR		0x3f0	/* 4.. Debug Status Register */
245 #define	  DBSR_IC		  0x80000000 /* Instruction completion debug event */
246 #define	  DBSR_BT		  0x40000000 /* Branch Taken debug event */
247 #define	  DBSR_EDE		  0x20000000 /* Exception debug event */
248 #define	  DBSR_TIE		  0x10000000 /* Trap Instruction debug event */
249 #define	  DBSR_UDE		  0x08000000 /* Unconditional debug event */
250 #define	  DBSR_IA1		  0x04000000 /* IAC1 debug event */
251 #define	  DBSR_IA2		  0x02000000 /* IAC2 debug event */
252 #define	  DBSR_DR1		  0x01000000 /* DAC1 Read debug event */
253 #define	  DBSR_DW1		  0x00800000 /* DAC1 Write debug event */
254 #define	  DBSR_DR2		  0x00400000 /* DAC2 Read debug event */
255 #define	  DBSR_DW2		  0x00200000 /* DAC2 Write debug event */
256 #define	  DBSR_IDE		  0x00100000 /* Imprecise debug event */
257 #define	  DBSR_IA3		  0x00080000 /* IAC3 debug event */
258 #define	  DBSR_IA4		  0x00040000 /* IAC4 debug event */
259 #define	  DBSR_MRR		  0x00000300 /* Most recent reset */
260 #define	SPR_HID0		0x3f0	/* ..8 Hardware Implementation Register 0 */
261 #define	SPR_HID1		0x3f1	/* ..8 Hardware Implementation Register 1 */
262 #define	SPR_DBCR0		0x3f2	/* 4.. Debug Control Register 0 */
263 #define	  DBCR0_EDM		  0x80000000 /* External Debug Mode */
264 #define	  DBCR0_IDM		  0x40000000 /* Internal Debug Mode */
265 #define	  DBCR0_RST_MASK	  0x30000000 /* ReSeT */
266 #define	  DBCR0_RST_NONE	  0x00000000 /*   No action */
267 #define	  DBCR0_RST_CORE	  0x10000000 /*   Core reset */
268 #define	  DBCR0_RST_CHIP	  0x20000000 /*   Chip reset */
269 #define	  DBCR0_RST_SYSTEM	  0x30000000 /*   System reset */
270 #define	  DBCR0_IC		  0x08000000 /* Instruction Completion debug event */
271 #define	  DBCR0_BT		  0x04000000 /* Branch Taken debug event */
272 #define	  DBCR0_EDE		  0x02000000 /* Exception Debug Event */
273 #define	  DBCR0_TDE		  0x01000000 /* Trap Debug Event */
274 #define	  DBCR0_IA1		  0x00800000 /* IAC (Instruction Address Compare) 1 debug event */
275 #define	  DBCR0_IA2		  0x00400000 /* IAC 2 debug event */
276 #define	  DBCR0_IA12		  0x00200000 /* Instruction Address Range Compare 1-2 */
277 #define	  DBCR0_IA12X		  0x00100000 /* IA12 eXclusive */
278 #define	  DBCR0_IA3		  0x00080000 /* IAC 3 debug event */
279 #define	  DBCR0_IA4		  0x00040000 /* IAC 4 debug event */
280 #define	  DBCR0_IA34		  0x00020000 /* Instruction Address Range Compare 3-4 */
281 #define	  DBCR0_IA34X		  0x00010000 /* IA34 eXclusive */
282 #define	  DBCR0_IA12T		  0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */
283 #define	  DBCR0_IA34T		  0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */
284 #define	  DBCR0_FT		  0x00000001 /* Freeze Timers on debug event */
285 #define	SPR_IABR		0x3f2	/* ..8 Instruction Address Breakpoint Register 0 */
286 #define	SPR_HID2		0x3f3	/* ..8 Hardware Implementation Register 2 */
287 #define	SPR_IAC1		0x3f4	/* 4.. Instruction Address Compare 1 */
288 #define	SPR_IAC2		0x3f5	/* 4.. Instruction Address Compare 2 */
289 #define	SPR_DABR		0x3f5	/* .6. Data Address Breakpoint Register */
290 #define	SPR_DAC1		0x3f6	/* 4.. Data Address Compare 1 */
291 #define	SPR_DAC2		0x3f7	/* 4.. Data Address Compare 2 */
292 #define	SPR_L2PM		0x3f8	/* .6. L2 Private Memory Control Register */
293 #define	SPR_L2CR		0x3f9	/* .6. L2 Control Register */
294 #define   L2CR_L2E		  0x80000000 /* 0: L2 enable */
295 #define   L2CR_L2PE		  0x40000000 /* 1: L2 data parity enable */
296 #define   L2CR_L2SIZ		  0x30000000 /* 2-3: L2 size */
297 #define    L2SIZ_2M		  0x00000000
298 #define    L2SIZ_256K		  0x10000000
299 #define    L2SIZ_512K		  0x20000000
300 #define    L2SIZ_1M		  0x30000000
301 #define   L2CR_L2CLK		  0x0e000000 /* 4-6: L2 clock ratio */
302 #define    L2CLK_DIS		  0x00000000 /* disable L2 clock */
303 #define    L2CLK_10		  0x02000000 /* core clock / 1   */
304 #define    L2CLK_15		  0x04000000 /*            / 1.5 */
305 #define    L2CLK_20		  0x08000000 /*            / 2   */
306 #define    L2CLK_25		  0x0a000000 /*            / 2.5 */
307 #define    L2CLK_30		  0x0c000000 /*            / 3   */
308 #define   L2CR_L2RAM		  0x01800000 /* 7-8: L2 RAM type */
309 #define    L2RAM_FLOWTHRU_BURST	  0x00000000
310 #define    L2RAM_PIPELINE_BURST	  0x01000000
311 #define    L2RAM_PIPELINE_LATE	  0x01800000
312 #define   L2CR_L2DO		  0x00400000 /* 9: L2 data-only.
313 				      Setting this bit disables instruction
314 				      caching. */
315 #define   L2CR_L2I		  0x00200000 /* 10: L2 global invalidate. */
316 #define   L2CR_L2CTL		  0x00100000 /* 11: L2 RAM control (ZZ enable).
317 				      Enables automatic operation of the
318 				      L2ZZ (low-power mode) signal. */
319 #define   L2CR_L2WT		  0x00080000 /* 12: L2 write-through. */
320 #define   L2CR_L2TS		  0x00040000 /* 13: L2 test support. */
321 #define   L2CR_L2OH		  0x00030000 /* 14-15: L2 output hold. */
322 #define   L2CR_L2SL		  0x00008000 /* 16: L2 DLL slow. */
323 #define   L2CR_L2DF		  0x00004000 /* 17: L2 differential clock. */
324 #define   L2CR_L2BYP		  0x00002000 /* 18: L2 DLL bypass. */
325 #define   L2CR_L2IP		  0x00000001 /* 31: L2 global invalidate in */
326 					     /*     progress (read only). */
327 #define	SPR_L3CR		0x3fa	/* .6. L3 Control Register */
328 #define   L3CR_L3E		  0x80000000 /*  0: L3 enable */
329 #define   L3CR_L3SIZ		  0x10000000 /*  3: L3 size (0=1MB, 1=2MB) */
330 #define	SPR_DCCR		0x3fa	/* 4.. Data Cache Cachability Register */
331 #define	SPR_ICCR		0x3fb	/* 4.. Instruction Cache Cachability Register */
332 #define	SPR_THRM1		0x3fc	/* .6. Thermal Management Register */
333 #define	SPR_THRM2		0x3fd	/* .6. Thermal Management Register */
334 #define	 SPR_THRM_TIN		  0x80000000 /* Thermal interrupt bit (RO) */
335 #define	 SPR_THRM_TIV		  0x40000000 /* Thermal interrupt valid (RO) */
336 #define	 SPR_THRM_THRESHOLD(x)	  ((x) << 23) /* Thermal sensor threshold */
337 #define	 SPR_THRM_TID		  0x00000004 /* Thermal interrupt direction */
338 #define	 SPR_THRM_TIE		  0x00000002 /* Thermal interrupt enable */
339 #define	 SPR_THRM_VALID		  0x00000001 /* Valid bit */
340 #define	SPR_THRM3		0x3fe	/* .6. Thermal Management Register */
341 #define	 SPR_THRM_TIMER(x)	  ((x) << 1) /* Sampling interval timer */
342 #define	 SPR_THRM_ENABLE       	  0x00000001 /* TAU Enable */
343 #define	SPR_FPECR		0x3fe	/* .6. Floating-Point Exception Cause Register */
344 #define	SPR_PIR			0x3ff	/* .6. Processor Identification Register */
345 
346 /* Time Base Register declarations */
347 #define	TBR_TBL			0x10c	/* 468 Time Base Lower */
348 #define	TBR_TBU			0x10d	/* 468 Time Base Upper */
349 
350 /* Performance counter declarations */
351 #define	PMC_OVERFLOW	  	0x80000000 /* Counter has overflowed */
352 
353 /* The first five countable [non-]events are common to all the PMC's */
354 #define	PMCN_NONE		 0 /* Count nothing */
355 #define	PMCN_CYCLES		 1 /* Processor cycles */
356 #define	PMCN_ICOMP		 2 /* Instructions completed */
357 #define	PMCN_TBLTRANS		 3 /* TBL bit transitions */
358 #define	PCMN_IDISPATCH		 4 /* Instructions dispatched */
359 
360 #endif /* !_POWERPC_SPR_H_ */
361