1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 3#include "qcom/qcom-ipq4019.dtsi" 4#include "qcom-ipq4019-ethernet.dtsi" 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/soc/qcom,tcsr.h> 9 10/ { 11 model = "ASUS RT-AC58U"; 12 compatible = "asus,rt-ac58u"; 13 14 memory { 15 device_type = "memory"; 16 reg = <0x80000000 0x8000000>; 17 }; 18 19 aliases { 20 led-boot = &led_power; 21 led-failsafe = &led_power; 22 led-running = &led_power; 23 led-upgrade = &led_power; 24 serial0 = &blsp1_uart1; 25 }; 26 27 chosen { 28 bootargs-append = " ubi.mtd=UBI_DEV"; 29// stdout-path = "serial0:115200n8"; 30 stdout-path = "serial0"; 31 }; 32 33 soc { 34 rng@22000 { 35 status = "okay"; 36 }; 37 38 mdio@90000 { 39 status = "okay"; 40 }; 41 42 ess-psgmii@98000 { 43 status = "okay"; 44 }; 45 46 tcsr@1949000 { 47 compatible = "qcom,tcsr"; 48 reg = <0x1949000 0x100>; 49 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; 50 }; 51 52 tcsr@194b000 { 53 compatible = "qcom,tcsr"; 54 reg = <0x194b000 0x100>; 55 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; 56 }; 57 58 ess_tcsr@1953000 { 59 compatible = "qcom,tcsr"; 60 reg = <0x1953000 0x1000>; 61 qcom,ess-interface-select = <TCSR_ESS_PSGMII>; 62 }; 63 64 tcsr@1957000 { 65 compatible = "qcom,tcsr"; 66 reg = <0x1957000 0x100>; 67 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; 68 }; 69 70 usb3@8af8800 { 71 status = "okay"; 72 73 dwc3@8a00000 { 74 #address-cells = <1>; 75 #size-cells = <0>; 76 77 usb3_port1: port@1 { 78 reg = <1>; 79 #trigger-source-cells = <0>; 80 }; 81 82 usb3_port2: port@2 { 83 reg = <2>; 84 #trigger-source-cells = <0>; 85 }; 86 }; 87 }; 88 89 crypto@8e3a000 { 90 status = "okay"; 91 }; 92 93 watchdog@b017000 { 94 status = "okay"; 95 }; 96 97 ess-switch@c000000 { 98 status = "okay"; 99 }; 100 101 edma@c080000 { 102 status = "okay"; 103 }; 104 }; 105 106 keys { 107 compatible = "gpio-keys"; 108 109 reset { 110 label = "reset"; 111 gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; 112 linux,code = <KEY_RESTART>; 113 }; 114 115 wps { 116 label = "wps"; 117 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; 118 linux,code = <KEY_WPS_BUTTON>; 119 }; 120 }; 121 122 leds { 123 compatible = "gpio-leds"; 124 125 led_power: status { 126 label = "blue:status"; 127 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; 128 }; 129 130 wan { 131 label = "blue:wan"; 132 gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; 133 }; 134 135 wlan2G { 136 label = "blue:wlan2G"; 137 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; 138 linux,default-trigger = "phy0tpt"; 139 }; 140 141 wlan5G { 142 label = "blue:wlan5G"; 143 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; 144 linux,default-trigger = "phy1tpt"; 145 }; 146 147 usb { 148 label = "blue:usb"; 149 gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; 150 trigger-sources = <&usb3_port1>, <&usb3_port2>; 151 linux,default-trigger = "usbport"; 152 }; 153 154 lan { 155 label = "blue:lan"; 156 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; 157 }; 158 }; 159}; 160 161&cryptobam { 162 status = "okay"; 163}; 164 165&blsp_dma { 166 status = "okay"; 167}; 168 169&tlmm { 170 serial_pins: serial_pinmux { 171 mux { 172 pins = "gpio60", "gpio61"; 173 function = "blsp_uart0"; 174 bias-disable; 175 }; 176 }; 177 178 spi_0_pins: spi_0_pinmux { 179 mux { 180 function = "blsp_spi0"; 181 pins = "gpio55", "gpio56", "gpio57"; 182 drive-strength = <12>; 183 bias-disable; 184 }; 185 186 mux_cs { 187 function = "gpio"; 188 pins = "gpio54", "gpio59"; 189 drive-strength = <2>; 190 bias-disable; 191 output-high; 192 }; 193 }; 194}; 195 196&blsp1_spi1 { /* BLSP1 QUP1 */ 197 pinctrl-0 = <&spi_0_pins>; 198 pinctrl-names = "default"; 199 status = "okay"; 200 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, 201 <&tlmm 59 GPIO_ACTIVE_HIGH>; 202 203 flash@0 { 204 /* 205 * U-boot looks for "n25q128a11" node, 206 * if we don't have it, it will spit out the following warning: 207 * "ipq: fdt fixup unable to find compatible node". 208 */ 209 compatible = "jedec,spi-nor"; 210 reg = <0>; 211 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; 212 spi-max-frequency = <30000000>; 213 214 partitions { 215 compatible = "fixed-partitions"; 216 #address-cells = <1>; 217 #size-cells = <1>; 218 219 partition@0 { 220 label = "SBL1"; 221 reg = <0x00000000 0x00040000>; 222 read-only; 223 }; 224 partition@40000 { 225 label = "MIBIB"; 226 reg = <0x00040000 0x00020000>; 227 read-only; 228 }; 229 partition@60000 { 230 label = "QSEE"; 231 reg = <0x00060000 0x00060000>; 232 read-only; 233 }; 234 partition@c0000 { 235 label = "CDT"; 236 reg = <0x000c0000 0x00010000>; 237 read-only; 238 }; 239 partition@d0000 { 240 label = "DDRPARAMS"; 241 reg = <0x000d0000 0x00010000>; 242 read-only; 243 }; 244 partition@e0000 { 245 label = "APPSBLENV"; /* uboot env*/ 246 reg = <0x000e0000 0x00010000>; 247 read-only; 248 }; 249 partition@f0000 { 250 label = "APPSBL"; /* uboot */ 251 reg = <0x000f0000 0x00080000>; 252 read-only; 253 }; 254 partition@170000 { 255 label = "ART"; 256 reg = <0x00170000 0x00010000>; 257 read-only; 258 }; 259 /* 0x00180000 - 0x00200000 unused */ 260 }; 261 }; 262 263 spi-nand@1 { 264 compatible = "spi-nand"; 265 reg = <1>; 266 spi-max-frequency = <30000000>; 267 268 /* 269 * U-boot looks for "spinand,mt29f" node, 270 * if we don't have it, it will spit out the following warning: 271 * "ipq: fdt fixup unable to find compatible node". 272 */ 273 274 partitions { 275 compatible = "fixed-partitions"; 276 #address-cells = <1>; 277 #size-cells = <1>; 278 279 partition@0 { 280 /* 281 * TODO: change to label = "ubi" once we drop 4.14. 282 * also drop the bootargs-append and all the 283 * userspace CI_UBIPART="UBI_DEV" remains. 284 */ 285 label = "UBI_DEV"; 286 reg = <0x00000000 0x08000000>; 287 }; 288 }; 289 }; 290}; 291 292&blsp1_uart1 { 293 pinctrl-0 = <&serial_pins>; 294 pinctrl-names = "default"; 295 status = "okay"; 296}; 297 298&usb3_ss_phy { 299 status = "okay"; 300}; 301 302&usb3_hs_phy { 303 status = "okay"; 304}; 305 306&wifi0 { 307 status = "okay"; 308 qcom,ath10k-calibration-variant = "RT-AC58U"; 309}; 310 311&wifi1 { 312 status = "okay"; 313 qcom,ath10k-calibration-variant = "RT-AC58U"; 314}; 315