1 /*- 2 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca> 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 18 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 19 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 20 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 21 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 * 25 * $FreeBSD$ 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/bus.h> 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <machine/bus.h> 37 38 #include <dev/uart/uart.h> 39 #include <dev/uart/uart_bus.h> 40 #include <dev/uart/uart_cpu_fdt.h> 41 #include <dev/uart/uart_dev_ns8250.h> 42 43 #include <dev/ofw/ofw_bus.h> 44 #include <dev/ofw/ofw_bus_subr.h> 45 46 #include <dev/extres/clk/clk.h> 47 #include <dev/extres/hwreset/hwreset.h> 48 49 #include "uart_if.h" 50 51 struct snps_softc { 52 struct ns8250_softc ns8250; 53 54 clk_t baudclk; 55 clk_t apb_pclk; 56 hwreset_t reset; 57 }; 58 59 /* 60 * To use early printf on 64 bits Allwinner SoC, add to kernel config 61 * options SOCDEV_PA=0x0 62 * options SOCDEV_VA=0x40000000 63 * options EARLY_PRINTF 64 * 65 * To use early printf on 32 bits Allwinner SoC, add to kernel config 66 * options SOCDEV_PA=0x01C00000 67 * options SOCDEV_VA=0x10000000 68 * options EARLY_PRINTF 69 * 70 * remove the if 0 71 */ 72 #if 0 73 #ifdef EARLY_PRINTF 74 static void 75 uart_snps_early_putc(int c) 76 { 77 volatile uint32_t *stat; 78 volatile uint32_t *tx; 79 80 #ifdef ALLWINNER_64 81 stat = (uint32_t *) (SOCDEV_VA + 0x1C2807C); 82 tx = (uint32_t *) (SOCDEV_VA + 0x1C28000); 83 #endif 84 #ifdef ALLWINNER_32 85 stat = (uint32_t *) (SOCDEV_VA + 0x2807C); 86 tx = (uint32_t *) (SOCDEV_VA + 0x28000); 87 #endif 88 89 while ((*stat & (1 << 2)) == 0) 90 continue; 91 *tx = c; 92 } 93 early_putc_t *early_putc = uart_snps_early_putc; 94 #endif /* EARLY_PRINTF */ 95 #endif 96 97 static kobj_method_t snps_methods[] = { 98 KOBJMETHOD(uart_probe, ns8250_bus_probe), 99 KOBJMETHOD(uart_attach, ns8250_bus_attach), 100 KOBJMETHOD(uart_detach, ns8250_bus_detach), 101 KOBJMETHOD(uart_flush, ns8250_bus_flush), 102 KOBJMETHOD(uart_getsig, ns8250_bus_getsig), 103 KOBJMETHOD(uart_ioctl, ns8250_bus_ioctl), 104 KOBJMETHOD(uart_ipend, ns8250_bus_ipend), 105 KOBJMETHOD(uart_param, ns8250_bus_param), 106 KOBJMETHOD(uart_receive, ns8250_bus_receive), 107 KOBJMETHOD(uart_setsig, ns8250_bus_setsig), 108 KOBJMETHOD(uart_transmit, ns8250_bus_transmit), 109 KOBJMETHOD(uart_grab, ns8250_bus_grab), 110 KOBJMETHOD(uart_ungrab, ns8250_bus_ungrab), 111 KOBJMETHOD_END 112 }; 113 114 struct uart_class uart_snps_class = { 115 "snps", 116 snps_methods, 117 sizeof(struct snps_softc), 118 .uc_ops = &uart_ns8250_ops, 119 .uc_range = 8, 120 .uc_rclk = 0, 121 }; 122 123 static struct ofw_compat_data compat_data[] = { 124 { "snps,dw-apb-uart", (uintptr_t)&uart_snps_class }, 125 { "marvell,armada-38x-uart", (uintptr_t)&uart_snps_class }, 126 { NULL, (uintptr_t)NULL } 127 }; 128 UART_FDT_CLASS(compat_data); 129 130 static int 131 snps_get_clocks(device_t dev, clk_t *baudclk, clk_t *apb_pclk) 132 { 133 134 *baudclk = NULL; 135 *apb_pclk = NULL; 136 137 /* Baud clock is either named "baudclk", or there is a single 138 * unnamed clock. 139 */ 140 if (clk_get_by_ofw_name(dev, 0, "baudclk", baudclk) != 0 && 141 clk_get_by_ofw_index(dev, 0, 0, baudclk) != 0) 142 return (ENOENT); 143 144 /* APB peripheral clock is optional */ 145 (void)clk_get_by_ofw_name(dev, 0, "apb_pclk", apb_pclk); 146 147 return (0); 148 } 149 150 static int 151 snps_probe(device_t dev) 152 { 153 struct snps_softc *sc; 154 struct uart_class *uart_class; 155 phandle_t node; 156 uint32_t shift, iowidth, clock; 157 uint64_t freq; 158 int error; 159 clk_t baudclk, apb_pclk; 160 hwreset_t reset; 161 162 if (!ofw_bus_status_okay(dev)) 163 return (ENXIO); 164 165 uart_class = (struct uart_class *)ofw_bus_search_compatible(dev, 166 compat_data)->ocd_data; 167 if (uart_class == NULL) 168 return (ENXIO); 169 170 freq = 0; 171 sc = device_get_softc(dev); 172 sc->ns8250.base.sc_class = uart_class; 173 174 node = ofw_bus_get_node(dev); 175 if (OF_getencprop(node, "reg-shift", &shift, sizeof(shift)) <= 0) 176 shift = 0; 177 if (OF_getencprop(node, "reg-io-width", &iowidth, sizeof(iowidth)) <= 0) 178 iowidth = 1; 179 if (OF_getencprop(node, "clock-frequency", &clock, sizeof(clock)) <= 0) 180 clock = 0; 181 182 if (hwreset_get_by_ofw_idx(dev, 0, 0, &reset) == 0) { 183 error = hwreset_deassert(reset); 184 if (error != 0) { 185 device_printf(dev, "cannot de-assert reset\n"); 186 return (error); 187 } 188 } 189 190 if (snps_get_clocks(dev, &baudclk, &apb_pclk) == 0) { 191 error = clk_enable(baudclk); 192 if (error != 0) { 193 device_printf(dev, "cannot enable baud clock\n"); 194 return (error); 195 } 196 if (apb_pclk != NULL) { 197 error = clk_enable(apb_pclk); 198 if (error != 0) { 199 device_printf(dev, 200 "cannot enable peripheral clock\n"); 201 return (error); 202 } 203 } 204 205 if (clock == 0) { 206 error = clk_get_freq(baudclk, &freq); 207 if (error != 0) { 208 device_printf(dev, "cannot get frequency\n"); 209 return (error); 210 } 211 clock = (uint32_t)freq; 212 } 213 } 214 215 if (bootverbose && clock == 0) 216 device_printf(dev, "could not determine frequency\n"); 217 218 error = uart_bus_probe(dev, (int)shift, (int)iowidth, (int)clock, 0, 0, UART_F_BUSY_DETECT); 219 if (error != 0) 220 return (error); 221 222 /* XXX uart_bus_probe has changed the softc, so refresh it */ 223 sc = device_get_softc(dev); 224 225 /* Store clock and reset handles for detach */ 226 sc->baudclk = baudclk; 227 sc->apb_pclk = apb_pclk; 228 sc->reset = reset; 229 230 return (0); 231 } 232 233 static int 234 snps_detach(device_t dev) 235 { 236 struct snps_softc *sc; 237 clk_t baudclk, apb_pclk; 238 hwreset_t reset; 239 int error; 240 241 sc = device_get_softc(dev); 242 baudclk = sc->baudclk; 243 apb_pclk = sc->apb_pclk; 244 reset = sc->reset; 245 246 error = uart_bus_detach(dev); 247 if (error != 0) 248 return (error); 249 250 if (reset != NULL) { 251 error = hwreset_assert(reset); 252 if (error != 0) { 253 device_printf(dev, "cannot assert reset\n"); 254 return (error); 255 } 256 hwreset_release(reset); 257 } 258 if (apb_pclk != NULL) { 259 error = clk_release(apb_pclk); 260 if (error != 0) { 261 device_printf(dev, "cannot release peripheral clock\n"); 262 return (error); 263 } 264 } 265 if (baudclk != NULL) { 266 error = clk_release(baudclk); 267 if (error != 0) { 268 device_printf(dev, "cannot release baud clock\n"); 269 return (error); 270 } 271 } 272 273 return (0); 274 } 275 276 static device_method_t snps_bus_methods[] = { 277 /* Device interface */ 278 DEVMETHOD(device_probe, snps_probe), 279 DEVMETHOD(device_attach, uart_bus_attach), 280 DEVMETHOD(device_detach, snps_detach), 281 DEVMETHOD_END 282 }; 283 284 static driver_t snps_uart_driver = { 285 uart_driver_name, 286 snps_bus_methods, 287 sizeof(struct snps_softc) 288 }; 289 290 DRIVER_MODULE(uart_snps, simplebus, snps_uart_driver, 0, 0); 291