1 /*- 2 * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 3 * PCI-SCSI controllers. 4 * 5 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 6 * 7 * This driver also supports the following Symbios/LSI PCI-SCSI chips: 8 * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895, 9 * 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode. 10 * 11 * 12 * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. 13 * Copyright (C) 1998-1999 Gerard Roudier 14 * 15 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 16 * a port of the FreeBSD ncr driver to Linux-1.2.13. 17 * 18 * The original ncr driver has been written for 386bsd and FreeBSD by 19 * Wolfgang Stanglmeier <wolf@cologne.de> 20 * Stefan Esser <se@mi.Uni-Koeln.de> 21 * Copyright (C) 1994 Wolfgang Stanglmeier 22 * 23 * The initialisation code, and part of the code that addresses 24 * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM 25 * written by Justin T. Gibbs. 26 * 27 * Other major contributions: 28 * 29 * NVRAM detection and reading. 30 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 31 * 32 *----------------------------------------------------------------------------- 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 1. Redistributions of source code must retain the above copyright 38 * notice, this list of conditions and the following disclaimer. 39 * 2. Redistributions in binary form must reproduce the above copyright 40 * notice, this list of conditions and the following disclaimer in the 41 * documentation and/or other materials provided with the distribution. 42 * 3. The name of the author may not be used to endorse or promote products 43 * derived from this software without specific prior written permission. 44 * 45 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 46 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 47 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 48 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 49 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 50 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 51 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 52 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 53 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 54 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 55 * SUCH DAMAGE. 56 */ 57 58 #include <sys/cdefs.h> 59 __FBSDID("$FreeBSD$"); 60 61 #define SYM_DRIVER_NAME "sym-1.6.5-20000902" 62 63 /* #define SYM_DEBUG_GENERIC_SUPPORT */ 64 65 #include <sys/param.h> 66 67 /* 68 * Driver configuration options. 69 */ 70 #include "opt_sym.h" 71 #include <dev/sym/sym_conf.h> 72 73 #include <sys/systm.h> 74 #include <sys/malloc.h> 75 #include <sys/endian.h> 76 #include <sys/kernel.h> 77 #include <sys/lock.h> 78 #include <sys/mutex.h> 79 #include <sys/module.h> 80 #include <sys/bus.h> 81 82 #include <sys/proc.h> 83 84 #include <dev/pci/pcireg.h> 85 #include <dev/pci/pcivar.h> 86 87 #include <machine/bus.h> 88 #include <machine/resource.h> 89 #include <machine/atomic.h> 90 91 #ifdef __sparc64__ 92 #include <dev/ofw/openfirm.h> 93 #include <machine/ofw_machdep.h> 94 #endif 95 96 #include <sys/rman.h> 97 98 #include <cam/cam.h> 99 #include <cam/cam_ccb.h> 100 #include <cam/cam_sim.h> 101 #include <cam/cam_xpt_sim.h> 102 #include <cam/cam_debug.h> 103 104 #include <cam/scsi/scsi_all.h> 105 #include <cam/scsi/scsi_message.h> 106 107 /* Short and quite clear integer types */ 108 typedef int8_t s8; 109 typedef int16_t s16; 110 typedef int32_t s32; 111 typedef u_int8_t u8; 112 typedef u_int16_t u16; 113 typedef u_int32_t u32; 114 115 /* 116 * Driver definitions. 117 */ 118 #include <dev/sym/sym_defs.h> 119 #include <dev/sym/sym_fw.h> 120 121 /* 122 * IA32 architecture does not reorder STORES and prevents 123 * LOADS from passing STORES. It is called `program order' 124 * by Intel and allows device drivers to deal with memory 125 * ordering by only ensuring that the code is not reordered 126 * by the compiler when ordering is required. 127 * Other architectures implement a weaker ordering that 128 * requires memory barriers (and also IO barriers when they 129 * make sense) to be used. 130 */ 131 #if defined __i386__ || defined __amd64__ 132 #define MEMORY_BARRIER() do { ; } while(0) 133 #elif defined __powerpc__ 134 #define MEMORY_BARRIER() __asm__ volatile("eieio; sync" : : : "memory") 135 #elif defined __sparc64__ 136 #define MEMORY_BARRIER() __asm__ volatile("membar #Sync" : : : "memory") 137 #elif defined __arm__ 138 #define MEMORY_BARRIER() dmb() 139 #else 140 #error "Not supported platform" 141 #endif 142 143 /* 144 * A la VMS/CAM-3 queue management. 145 */ 146 typedef struct sym_quehead { 147 struct sym_quehead *flink; /* Forward pointer */ 148 struct sym_quehead *blink; /* Backward pointer */ 149 } SYM_QUEHEAD; 150 151 #define sym_que_init(ptr) do { \ 152 (ptr)->flink = (ptr); (ptr)->blink = (ptr); \ 153 } while (0) 154 155 static __inline void __sym_que_add(struct sym_quehead * new, 156 struct sym_quehead * blink, 157 struct sym_quehead * flink) 158 { 159 flink->blink = new; 160 new->flink = flink; 161 new->blink = blink; 162 blink->flink = new; 163 } 164 165 static __inline void __sym_que_del(struct sym_quehead * blink, 166 struct sym_quehead * flink) 167 { 168 flink->blink = blink; 169 blink->flink = flink; 170 } 171 172 static __inline int sym_que_empty(struct sym_quehead *head) 173 { 174 return head->flink == head; 175 } 176 177 static __inline void sym_que_splice(struct sym_quehead *list, 178 struct sym_quehead *head) 179 { 180 struct sym_quehead *first = list->flink; 181 182 if (first != list) { 183 struct sym_quehead *last = list->blink; 184 struct sym_quehead *at = head->flink; 185 186 first->blink = head; 187 head->flink = first; 188 189 last->flink = at; 190 at->blink = last; 191 } 192 } 193 194 #define sym_que_entry(ptr, type, member) \ 195 ((type *)((char *)(ptr)-(size_t)(&((type *)0)->member))) 196 197 #define sym_insque(new, pos) __sym_que_add(new, pos, (pos)->flink) 198 199 #define sym_remque(el) __sym_que_del((el)->blink, (el)->flink) 200 201 #define sym_insque_head(new, head) __sym_que_add(new, head, (head)->flink) 202 203 static __inline struct sym_quehead *sym_remque_head(struct sym_quehead *head) 204 { 205 struct sym_quehead *elem = head->flink; 206 207 if (elem != head) 208 __sym_que_del(head, elem->flink); 209 else 210 elem = NULL; 211 return elem; 212 } 213 214 #define sym_insque_tail(new, head) __sym_que_add(new, (head)->blink, head) 215 216 /* 217 * This one may be useful. 218 */ 219 #define FOR_EACH_QUEUED_ELEMENT(head, qp) \ 220 for (qp = (head)->flink; qp != (head); qp = qp->flink) 221 /* 222 * FreeBSD does not offer our kind of queue in the CAM CCB. 223 * So, we have to cast. 224 */ 225 #define sym_qptr(p) ((struct sym_quehead *) (p)) 226 227 /* 228 * Simple bitmap operations. 229 */ 230 #define sym_set_bit(p, n) (((u32 *)(p))[(n)>>5] |= (1<<((n)&0x1f))) 231 #define sym_clr_bit(p, n) (((u32 *)(p))[(n)>>5] &= ~(1<<((n)&0x1f))) 232 #define sym_is_bit(p, n) (((u32 *)(p))[(n)>>5] & (1<<((n)&0x1f))) 233 234 /* 235 * Number of tasks per device we want to handle. 236 */ 237 #if SYM_CONF_MAX_TAG_ORDER > 8 238 #error "more than 256 tags per logical unit not allowed." 239 #endif 240 #define SYM_CONF_MAX_TASK (1<<SYM_CONF_MAX_TAG_ORDER) 241 242 /* 243 * Donnot use more tasks that we can handle. 244 */ 245 #ifndef SYM_CONF_MAX_TAG 246 #define SYM_CONF_MAX_TAG SYM_CONF_MAX_TASK 247 #endif 248 #if SYM_CONF_MAX_TAG > SYM_CONF_MAX_TASK 249 #undef SYM_CONF_MAX_TAG 250 #define SYM_CONF_MAX_TAG SYM_CONF_MAX_TASK 251 #endif 252 253 /* 254 * This one means 'NO TAG for this job' 255 */ 256 #define NO_TAG (256) 257 258 /* 259 * Number of SCSI targets. 260 */ 261 #if SYM_CONF_MAX_TARGET > 16 262 #error "more than 16 targets not allowed." 263 #endif 264 265 /* 266 * Number of logical units per target. 267 */ 268 #if SYM_CONF_MAX_LUN > 64 269 #error "more than 64 logical units per target not allowed." 270 #endif 271 272 /* 273 * Asynchronous pre-scaler (ns). Shall be 40 for 274 * the SCSI timings to be compliant. 275 */ 276 #define SYM_CONF_MIN_ASYNC (40) 277 278 /* 279 * Number of entries in the START and DONE queues. 280 * 281 * We limit to 1 PAGE in order to succeed allocation of 282 * these queues. Each entry is 8 bytes long (2 DWORDS). 283 */ 284 #ifdef SYM_CONF_MAX_START 285 #define SYM_CONF_MAX_QUEUE (SYM_CONF_MAX_START+2) 286 #else 287 #define SYM_CONF_MAX_QUEUE (7*SYM_CONF_MAX_TASK+2) 288 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2) 289 #endif 290 291 #if SYM_CONF_MAX_QUEUE > PAGE_SIZE/8 292 #undef SYM_CONF_MAX_QUEUE 293 #define SYM_CONF_MAX_QUEUE PAGE_SIZE/8 294 #undef SYM_CONF_MAX_START 295 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2) 296 #endif 297 298 /* 299 * For this one, we want a short name :-) 300 */ 301 #define MAX_QUEUE SYM_CONF_MAX_QUEUE 302 303 /* 304 * Active debugging tags and verbosity. 305 */ 306 #define DEBUG_ALLOC (0x0001) 307 #define DEBUG_PHASE (0x0002) 308 #define DEBUG_POLL (0x0004) 309 #define DEBUG_QUEUE (0x0008) 310 #define DEBUG_RESULT (0x0010) 311 #define DEBUG_SCATTER (0x0020) 312 #define DEBUG_SCRIPT (0x0040) 313 #define DEBUG_TINY (0x0080) 314 #define DEBUG_TIMING (0x0100) 315 #define DEBUG_NEGO (0x0200) 316 #define DEBUG_TAGS (0x0400) 317 #define DEBUG_POINTER (0x0800) 318 319 #if 0 320 static int sym_debug = 0; 321 #define DEBUG_FLAGS sym_debug 322 #else 323 /* #define DEBUG_FLAGS (0x0631) */ 324 #define DEBUG_FLAGS (0x0000) 325 326 #endif 327 #define sym_verbose (np->verbose) 328 329 /* 330 * Insert a delay in micro-seconds and milli-seconds. 331 */ 332 static void UDELAY(int us) { DELAY(us); } 333 static void MDELAY(int ms) { while (ms--) UDELAY(1000); } 334 335 /* 336 * Simple power of two buddy-like allocator. 337 * 338 * This simple code is not intended to be fast, but to 339 * provide power of 2 aligned memory allocations. 340 * Since the SCRIPTS processor only supplies 8 bit arithmetic, 341 * this allocator allows simple and fast address calculations 342 * from the SCRIPTS code. In addition, cache line alignment 343 * is guaranteed for power of 2 cache line size. 344 * 345 * This allocator has been developed for the Linux sym53c8xx 346 * driver, since this O/S does not provide naturally aligned 347 * allocations. 348 * It has the advantage of allowing the driver to use private 349 * pages of memory that will be useful if we ever need to deal 350 * with IO MMUs for PCI. 351 */ 352 #define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ 353 #define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ 354 #if 0 355 #define MEMO_FREE_UNUSED /* Free unused pages immediately */ 356 #endif 357 #define MEMO_WARN 1 358 #define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) 359 #define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) 360 #define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) 361 362 #define get_pages() malloc(MEMO_CLUSTER_SIZE, M_DEVBUF, M_NOWAIT) 363 #define free_pages(p) free((p), M_DEVBUF) 364 365 typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ 366 367 typedef struct m_link { /* Link between free memory chunks */ 368 struct m_link *next; 369 } m_link_s; 370 371 typedef struct m_vtob { /* Virtual to Bus address translation */ 372 struct m_vtob *next; 373 bus_dmamap_t dmamap; /* Map for this chunk */ 374 m_addr_t vaddr; /* Virtual address */ 375 m_addr_t baddr; /* Bus physical address */ 376 } m_vtob_s; 377 /* Hash this stuff a bit to speed up translations */ 378 #define VTOB_HASH_SHIFT 5 379 #define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) 380 #define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) 381 #define VTOB_HASH_CODE(m) \ 382 ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) 383 384 typedef struct m_pool { /* Memory pool of a given kind */ 385 bus_dma_tag_t dev_dmat; /* Identifies the pool */ 386 bus_dma_tag_t dmat; /* Tag for our fixed allocations */ 387 m_addr_t (*getp)(struct m_pool *); 388 #ifdef MEMO_FREE_UNUSED 389 void (*freep)(struct m_pool *, m_addr_t); 390 #endif 391 #define M_GETP() mp->getp(mp) 392 #define M_FREEP(p) mp->freep(mp, p) 393 int nump; 394 m_vtob_s *(vtob[VTOB_HASH_SIZE]); 395 struct m_pool *next; 396 struct m_link h[MEMO_CLUSTER_SHIFT - MEMO_SHIFT + 1]; 397 } m_pool_s; 398 399 static void *___sym_malloc(m_pool_s *mp, int size) 400 { 401 int i = 0; 402 int s = (1 << MEMO_SHIFT); 403 int j; 404 m_addr_t a; 405 m_link_s *h = mp->h; 406 407 if (size > MEMO_CLUSTER_SIZE) 408 return NULL; 409 410 while (size > s) { 411 s <<= 1; 412 ++i; 413 } 414 415 j = i; 416 while (!h[j].next) { 417 if (s == MEMO_CLUSTER_SIZE) { 418 h[j].next = (m_link_s *) M_GETP(); 419 if (h[j].next) 420 h[j].next->next = NULL; 421 break; 422 } 423 ++j; 424 s <<= 1; 425 } 426 a = (m_addr_t) h[j].next; 427 if (a) { 428 h[j].next = h[j].next->next; 429 while (j > i) { 430 j -= 1; 431 s >>= 1; 432 h[j].next = (m_link_s *) (a+s); 433 h[j].next->next = NULL; 434 } 435 } 436 #ifdef DEBUG 437 printf("___sym_malloc(%d) = %p\n", size, (void *) a); 438 #endif 439 return (void *) a; 440 } 441 442 static void ___sym_mfree(m_pool_s *mp, void *ptr, int size) 443 { 444 int i = 0; 445 int s = (1 << MEMO_SHIFT); 446 m_link_s *q; 447 m_addr_t a, b; 448 m_link_s *h = mp->h; 449 450 #ifdef DEBUG 451 printf("___sym_mfree(%p, %d)\n", ptr, size); 452 #endif 453 454 if (size > MEMO_CLUSTER_SIZE) 455 return; 456 457 while (size > s) { 458 s <<= 1; 459 ++i; 460 } 461 462 a = (m_addr_t) ptr; 463 464 while (1) { 465 #ifdef MEMO_FREE_UNUSED 466 if (s == MEMO_CLUSTER_SIZE) { 467 M_FREEP(a); 468 break; 469 } 470 #endif 471 b = a ^ s; 472 q = &h[i]; 473 while (q->next && q->next != (m_link_s *) b) { 474 q = q->next; 475 } 476 if (!q->next) { 477 ((m_link_s *) a)->next = h[i].next; 478 h[i].next = (m_link_s *) a; 479 break; 480 } 481 q->next = q->next->next; 482 a = a & b; 483 s <<= 1; 484 ++i; 485 } 486 } 487 488 static void *__sym_calloc2(m_pool_s *mp, int size, char *name, int uflags) 489 { 490 void *p; 491 492 p = ___sym_malloc(mp, size); 493 494 if (DEBUG_FLAGS & DEBUG_ALLOC) 495 printf ("new %-10s[%4d] @%p.\n", name, size, p); 496 497 if (p) 498 bzero(p, size); 499 else if (uflags & MEMO_WARN) 500 printf ("__sym_calloc2: failed to allocate %s[%d]\n", name, size); 501 502 return p; 503 } 504 505 #define __sym_calloc(mp, s, n) __sym_calloc2(mp, s, n, MEMO_WARN) 506 507 static void __sym_mfree(m_pool_s *mp, void *ptr, int size, char *name) 508 { 509 if (DEBUG_FLAGS & DEBUG_ALLOC) 510 printf ("freeing %-10s[%4d] @%p.\n", name, size, ptr); 511 512 ___sym_mfree(mp, ptr, size); 513 514 } 515 516 /* 517 * Default memory pool we donnot need to involve in DMA. 518 */ 519 /* 520 * With the `bus dma abstraction', we use a separate pool for 521 * memory we donnot need to involve in DMA. 522 */ 523 static m_addr_t ___mp0_getp(m_pool_s *mp) 524 { 525 m_addr_t m = (m_addr_t) get_pages(); 526 if (m) 527 ++mp->nump; 528 return m; 529 } 530 531 #ifdef MEMO_FREE_UNUSED 532 static void ___mp0_freep(m_pool_s *mp, m_addr_t m) 533 { 534 free_pages(m); 535 --mp->nump; 536 } 537 #endif 538 539 #ifdef MEMO_FREE_UNUSED 540 static m_pool_s mp0 = {0, 0, ___mp0_getp, ___mp0_freep}; 541 #else 542 static m_pool_s mp0 = {0, 0, ___mp0_getp}; 543 #endif 544 545 /* 546 * Actual memory allocation routine for non-DMAed memory. 547 */ 548 static void *sym_calloc(int size, char *name) 549 { 550 void *m; 551 /* Lock */ 552 m = __sym_calloc(&mp0, size, name); 553 /* Unlock */ 554 return m; 555 } 556 557 /* 558 * Actual memory allocation routine for non-DMAed memory. 559 */ 560 static void sym_mfree(void *ptr, int size, char *name) 561 { 562 /* Lock */ 563 __sym_mfree(&mp0, ptr, size, name); 564 /* Unlock */ 565 } 566 567 /* 568 * DMAable pools. 569 */ 570 /* 571 * With `bus dma abstraction', we use a separate pool per parent 572 * BUS handle. A reverse table (hashed) is maintained for virtual 573 * to BUS address translation. 574 */ 575 static void getbaddrcb(void *arg, bus_dma_segment_t *segs, int nseg __unused, 576 int error) 577 { 578 bus_addr_t *baddr; 579 580 KASSERT(nseg == 1, ("%s: too many DMA segments (%d)", __func__, nseg)); 581 582 baddr = (bus_addr_t *)arg; 583 if (error) 584 *baddr = 0; 585 else 586 *baddr = segs->ds_addr; 587 } 588 589 static m_addr_t ___dma_getp(m_pool_s *mp) 590 { 591 m_vtob_s *vbp; 592 void *vaddr = NULL; 593 bus_addr_t baddr = 0; 594 595 vbp = __sym_calloc(&mp0, sizeof(*vbp), "VTOB"); 596 if (!vbp) 597 goto out_err; 598 599 if (bus_dmamem_alloc(mp->dmat, &vaddr, 600 BUS_DMA_COHERENT | BUS_DMA_WAITOK, &vbp->dmamap)) 601 goto out_err; 602 bus_dmamap_load(mp->dmat, vbp->dmamap, vaddr, 603 MEMO_CLUSTER_SIZE, getbaddrcb, &baddr, BUS_DMA_NOWAIT); 604 if (baddr) { 605 int hc = VTOB_HASH_CODE(vaddr); 606 vbp->vaddr = (m_addr_t) vaddr; 607 vbp->baddr = (m_addr_t) baddr; 608 vbp->next = mp->vtob[hc]; 609 mp->vtob[hc] = vbp; 610 ++mp->nump; 611 return (m_addr_t) vaddr; 612 } 613 out_err: 614 if (baddr) 615 bus_dmamap_unload(mp->dmat, vbp->dmamap); 616 if (vaddr) 617 bus_dmamem_free(mp->dmat, vaddr, vbp->dmamap); 618 if (vbp) 619 __sym_mfree(&mp0, vbp, sizeof(*vbp), "VTOB"); 620 return 0; 621 } 622 623 #ifdef MEMO_FREE_UNUSED 624 static void ___dma_freep(m_pool_s *mp, m_addr_t m) 625 { 626 m_vtob_s **vbpp, *vbp; 627 int hc = VTOB_HASH_CODE(m); 628 629 vbpp = &mp->vtob[hc]; 630 while (*vbpp && (*vbpp)->vaddr != m) 631 vbpp = &(*vbpp)->next; 632 if (*vbpp) { 633 vbp = *vbpp; 634 *vbpp = (*vbpp)->next; 635 bus_dmamap_unload(mp->dmat, vbp->dmamap); 636 bus_dmamem_free(mp->dmat, (void *) vbp->vaddr, vbp->dmamap); 637 __sym_mfree(&mp0, vbp, sizeof(*vbp), "VTOB"); 638 --mp->nump; 639 } 640 } 641 #endif 642 643 static __inline m_pool_s *___get_dma_pool(bus_dma_tag_t dev_dmat) 644 { 645 m_pool_s *mp; 646 for (mp = mp0.next; mp && mp->dev_dmat != dev_dmat; mp = mp->next); 647 return mp; 648 } 649 650 static m_pool_s *___cre_dma_pool(bus_dma_tag_t dev_dmat) 651 { 652 m_pool_s *mp = NULL; 653 654 mp = __sym_calloc(&mp0, sizeof(*mp), "MPOOL"); 655 if (mp) { 656 mp->dev_dmat = dev_dmat; 657 if (!bus_dma_tag_create(dev_dmat, 1, MEMO_CLUSTER_SIZE, 658 BUS_SPACE_MAXADDR_32BIT, 659 BUS_SPACE_MAXADDR, 660 NULL, NULL, MEMO_CLUSTER_SIZE, 1, 661 MEMO_CLUSTER_SIZE, 0, 662 NULL, NULL, &mp->dmat)) { 663 mp->getp = ___dma_getp; 664 #ifdef MEMO_FREE_UNUSED 665 mp->freep = ___dma_freep; 666 #endif 667 mp->next = mp0.next; 668 mp0.next = mp; 669 return mp; 670 } 671 } 672 if (mp) 673 __sym_mfree(&mp0, mp, sizeof(*mp), "MPOOL"); 674 return NULL; 675 } 676 677 #ifdef MEMO_FREE_UNUSED 678 static void ___del_dma_pool(m_pool_s *p) 679 { 680 struct m_pool **pp = &mp0.next; 681 682 while (*pp && *pp != p) 683 pp = &(*pp)->next; 684 if (*pp) { 685 *pp = (*pp)->next; 686 bus_dma_tag_destroy(p->dmat); 687 __sym_mfree(&mp0, p, sizeof(*p), "MPOOL"); 688 } 689 } 690 #endif 691 692 static void *__sym_calloc_dma(bus_dma_tag_t dev_dmat, int size, char *name) 693 { 694 struct m_pool *mp; 695 void *m = NULL; 696 697 /* Lock */ 698 mp = ___get_dma_pool(dev_dmat); 699 if (!mp) 700 mp = ___cre_dma_pool(dev_dmat); 701 if (mp) 702 m = __sym_calloc(mp, size, name); 703 #ifdef MEMO_FREE_UNUSED 704 if (mp && !mp->nump) 705 ___del_dma_pool(mp); 706 #endif 707 /* Unlock */ 708 709 return m; 710 } 711 712 static void 713 __sym_mfree_dma(bus_dma_tag_t dev_dmat, void *m, int size, char *name) 714 { 715 struct m_pool *mp; 716 717 /* Lock */ 718 mp = ___get_dma_pool(dev_dmat); 719 if (mp) 720 __sym_mfree(mp, m, size, name); 721 #ifdef MEMO_FREE_UNUSED 722 if (mp && !mp->nump) 723 ___del_dma_pool(mp); 724 #endif 725 /* Unlock */ 726 } 727 728 static m_addr_t __vtobus(bus_dma_tag_t dev_dmat, void *m) 729 { 730 m_pool_s *mp; 731 int hc = VTOB_HASH_CODE(m); 732 m_vtob_s *vp = NULL; 733 m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; 734 735 /* Lock */ 736 mp = ___get_dma_pool(dev_dmat); 737 if (mp) { 738 vp = mp->vtob[hc]; 739 while (vp && (m_addr_t) vp->vaddr != a) 740 vp = vp->next; 741 } 742 /* Unlock */ 743 if (!vp) 744 panic("sym: VTOBUS FAILED!\n"); 745 return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; 746 } 747 748 /* 749 * Verbs for DMAable memory handling. 750 * The _uvptv_ macro avoids a nasty warning about pointer to volatile 751 * being discarded. 752 */ 753 #define _uvptv_(p) ((void *)((vm_offset_t)(p))) 754 #define _sym_calloc_dma(np, s, n) __sym_calloc_dma(np->bus_dmat, s, n) 755 #define _sym_mfree_dma(np, p, s, n) \ 756 __sym_mfree_dma(np->bus_dmat, _uvptv_(p), s, n) 757 #define sym_calloc_dma(s, n) _sym_calloc_dma(np, s, n) 758 #define sym_mfree_dma(p, s, n) _sym_mfree_dma(np, p, s, n) 759 #define _vtobus(np, p) __vtobus(np->bus_dmat, _uvptv_(p)) 760 #define vtobus(p) _vtobus(np, p) 761 762 /* 763 * Print a buffer in hexadecimal format. 764 */ 765 static void sym_printb_hex (u_char *p, int n) 766 { 767 while (n-- > 0) 768 printf (" %x", *p++); 769 } 770 771 /* 772 * Same with a label at beginning and .\n at end. 773 */ 774 static void sym_printl_hex (char *label, u_char *p, int n) 775 { 776 printf ("%s", label); 777 sym_printb_hex (p, n); 778 printf (".\n"); 779 } 780 781 /* 782 * Return a string for SCSI BUS mode. 783 */ 784 static const char *sym_scsi_bus_mode(int mode) 785 { 786 switch(mode) { 787 case SMODE_HVD: return "HVD"; 788 case SMODE_SE: return "SE"; 789 case SMODE_LVD: return "LVD"; 790 } 791 return "??"; 792 } 793 794 /* 795 * Some poor and bogus sync table that refers to Tekram NVRAM layout. 796 */ 797 #ifdef SYM_CONF_NVRAM_SUPPORT 798 static const u_char Tekram_sync[16] = 799 {25,31,37,43, 50,62,75,125, 12,15,18,21, 6,7,9,10}; 800 #endif 801 802 /* 803 * Union of supported NVRAM formats. 804 */ 805 struct sym_nvram { 806 int type; 807 #define SYM_SYMBIOS_NVRAM (1) 808 #define SYM_TEKRAM_NVRAM (2) 809 #ifdef SYM_CONF_NVRAM_SUPPORT 810 union { 811 Symbios_nvram Symbios; 812 Tekram_nvram Tekram; 813 } data; 814 #endif 815 }; 816 817 /* 818 * This one is hopefully useless, but actually useful. :-) 819 */ 820 #ifndef assert 821 #define assert(expression) { \ 822 if (!(expression)) { \ 823 (void)panic( \ 824 "assertion \"%s\" failed: file \"%s\", line %d\n", \ 825 #expression, \ 826 __FILE__, __LINE__); \ 827 } \ 828 } 829 #endif 830 831 /* 832 * Some provision for a possible big endian mode supported by 833 * Symbios chips (never seen, by the way). 834 * For now, this stuff does not deserve any comments. :) 835 */ 836 #define sym_offb(o) (o) 837 #define sym_offw(o) (o) 838 839 /* 840 * Some provision for support for BIG ENDIAN CPU. 841 */ 842 #define cpu_to_scr(dw) htole32(dw) 843 #define scr_to_cpu(dw) le32toh(dw) 844 845 /* 846 * Access to the chip IO registers and on-chip RAM. 847 * We use the `bus space' interface under FreeBSD-4 and 848 * later kernel versions. 849 */ 850 #if defined(SYM_CONF_IOMAPPED) 851 852 #define INB_OFF(o) bus_read_1(np->io_res, (o)) 853 #define INW_OFF(o) bus_read_2(np->io_res, (o)) 854 #define INL_OFF(o) bus_read_4(np->io_res, (o)) 855 856 #define OUTB_OFF(o, v) bus_write_1(np->io_res, (o), (v)) 857 #define OUTW_OFF(o, v) bus_write_2(np->io_res, (o), (v)) 858 #define OUTL_OFF(o, v) bus_write_4(np->io_res, (o), (v)) 859 860 #else /* Memory mapped IO */ 861 862 #define INB_OFF(o) bus_read_1(np->mmio_res, (o)) 863 #define INW_OFF(o) bus_read_2(np->mmio_res, (o)) 864 #define INL_OFF(o) bus_read_4(np->mmio_res, (o)) 865 866 #define OUTB_OFF(o, v) bus_write_1(np->mmio_res, (o), (v)) 867 #define OUTW_OFF(o, v) bus_write_2(np->mmio_res, (o), (v)) 868 #define OUTL_OFF(o, v) bus_write_4(np->mmio_res, (o), (v)) 869 870 #endif /* SYM_CONF_IOMAPPED */ 871 872 #define OUTRAM_OFF(o, a, l) \ 873 bus_write_region_1(np->ram_res, (o), (a), (l)) 874 875 /* 876 * Common definitions for both bus space and legacy IO methods. 877 */ 878 #define INB(r) INB_OFF(offsetof(struct sym_reg,r)) 879 #define INW(r) INW_OFF(offsetof(struct sym_reg,r)) 880 #define INL(r) INL_OFF(offsetof(struct sym_reg,r)) 881 882 #define OUTB(r, v) OUTB_OFF(offsetof(struct sym_reg,r), (v)) 883 #define OUTW(r, v) OUTW_OFF(offsetof(struct sym_reg,r), (v)) 884 #define OUTL(r, v) OUTL_OFF(offsetof(struct sym_reg,r), (v)) 885 886 #define OUTONB(r, m) OUTB(r, INB(r) | (m)) 887 #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) 888 #define OUTONW(r, m) OUTW(r, INW(r) | (m)) 889 #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) 890 #define OUTONL(r, m) OUTL(r, INL(r) | (m)) 891 #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) 892 893 /* 894 * We normally want the chip to have a consistent view 895 * of driver internal data structures when we restart it. 896 * Thus these macros. 897 */ 898 #define OUTL_DSP(v) \ 899 do { \ 900 MEMORY_BARRIER(); \ 901 OUTL (nc_dsp, (v)); \ 902 } while (0) 903 904 #define OUTONB_STD() \ 905 do { \ 906 MEMORY_BARRIER(); \ 907 OUTONB (nc_dcntl, (STD|NOCOM)); \ 908 } while (0) 909 910 /* 911 * Command control block states. 912 */ 913 #define HS_IDLE (0) 914 #define HS_BUSY (1) 915 #define HS_NEGOTIATE (2) /* sync/wide data transfer*/ 916 #define HS_DISCONNECT (3) /* Disconnected by target */ 917 #define HS_WAIT (4) /* waiting for resource */ 918 919 #define HS_DONEMASK (0x80) 920 #define HS_COMPLETE (4|HS_DONEMASK) 921 #define HS_SEL_TIMEOUT (5|HS_DONEMASK) /* Selection timeout */ 922 #define HS_UNEXPECTED (6|HS_DONEMASK) /* Unexpected disconnect */ 923 #define HS_COMP_ERR (7|HS_DONEMASK) /* Completed with error */ 924 925 /* 926 * Software Interrupt Codes 927 */ 928 #define SIR_BAD_SCSI_STATUS (1) 929 #define SIR_SEL_ATN_NO_MSG_OUT (2) 930 #define SIR_MSG_RECEIVED (3) 931 #define SIR_MSG_WEIRD (4) 932 #define SIR_NEGO_FAILED (5) 933 #define SIR_NEGO_PROTO (6) 934 #define SIR_SCRIPT_STOPPED (7) 935 #define SIR_REJECT_TO_SEND (8) 936 #define SIR_SWIDE_OVERRUN (9) 937 #define SIR_SODL_UNDERRUN (10) 938 #define SIR_RESEL_NO_MSG_IN (11) 939 #define SIR_RESEL_NO_IDENTIFY (12) 940 #define SIR_RESEL_BAD_LUN (13) 941 #define SIR_TARGET_SELECTED (14) 942 #define SIR_RESEL_BAD_I_T_L (15) 943 #define SIR_RESEL_BAD_I_T_L_Q (16) 944 #define SIR_ABORT_SENT (17) 945 #define SIR_RESEL_ABORTED (18) 946 #define SIR_MSG_OUT_DONE (19) 947 #define SIR_COMPLETE_ERROR (20) 948 #define SIR_DATA_OVERRUN (21) 949 #define SIR_BAD_PHASE (22) 950 #define SIR_MAX (22) 951 952 /* 953 * Extended error bit codes. 954 * xerr_status field of struct sym_ccb. 955 */ 956 #define XE_EXTRA_DATA (1) /* unexpected data phase */ 957 #define XE_BAD_PHASE (1<<1) /* illegal phase (4/5) */ 958 #define XE_PARITY_ERR (1<<2) /* unrecovered SCSI parity error */ 959 #define XE_SODL_UNRUN (1<<3) /* ODD transfer in DATA OUT phase */ 960 #define XE_SWIDE_OVRUN (1<<4) /* ODD transfer in DATA IN phase */ 961 962 /* 963 * Negotiation status. 964 * nego_status field of struct sym_ccb. 965 */ 966 #define NS_SYNC (1) 967 #define NS_WIDE (2) 968 #define NS_PPR (3) 969 970 /* 971 * A CCB hashed table is used to retrieve CCB address 972 * from DSA value. 973 */ 974 #define CCB_HASH_SHIFT 8 975 #define CCB_HASH_SIZE (1UL << CCB_HASH_SHIFT) 976 #define CCB_HASH_MASK (CCB_HASH_SIZE-1) 977 #define CCB_HASH_CODE(dsa) (((dsa) >> 9) & CCB_HASH_MASK) 978 979 /* 980 * Device flags. 981 */ 982 #define SYM_DISC_ENABLED (1) 983 #define SYM_TAGS_ENABLED (1<<1) 984 #define SYM_SCAN_BOOT_DISABLED (1<<2) 985 #define SYM_SCAN_LUNS_DISABLED (1<<3) 986 987 /* 988 * Host adapter miscellaneous flags. 989 */ 990 #define SYM_AVOID_BUS_RESET (1) 991 #define SYM_SCAN_TARGETS_HILO (1<<1) 992 993 /* 994 * Device quirks. 995 * Some devices, for example the CHEETAH 2 LVD, disconnects without 996 * saving the DATA POINTER then reselects and terminates the IO. 997 * On reselection, the automatic RESTORE DATA POINTER makes the 998 * CURRENT DATA POINTER not point at the end of the IO. 999 * This behaviour just breaks our calculation of the residual. 1000 * For now, we just force an AUTO SAVE on disconnection and will 1001 * fix that in a further driver version. 1002 */ 1003 #define SYM_QUIRK_AUTOSAVE 1 1004 1005 /* 1006 * Misc. 1007 */ 1008 #define SYM_LOCK() mtx_lock(&np->mtx) 1009 #define SYM_LOCK_ASSERT(_what) mtx_assert(&np->mtx, (_what)) 1010 #define SYM_LOCK_DESTROY() mtx_destroy(&np->mtx) 1011 #define SYM_LOCK_INIT() mtx_init(&np->mtx, "sym_lock", NULL, MTX_DEF) 1012 #define SYM_LOCK_INITIALIZED() mtx_initialized(&np->mtx) 1013 #define SYM_UNLOCK() mtx_unlock(&np->mtx) 1014 1015 #define SYM_SNOOP_TIMEOUT (10000000) 1016 #define SYM_PCI_IO PCIR_BAR(0) 1017 #define SYM_PCI_MMIO PCIR_BAR(1) 1018 #define SYM_PCI_RAM PCIR_BAR(2) 1019 #define SYM_PCI_RAM64 PCIR_BAR(3) 1020 1021 /* 1022 * Back-pointer from the CAM CCB to our data structures. 1023 */ 1024 #define sym_hcb_ptr spriv_ptr0 1025 /* #define sym_ccb_ptr spriv_ptr1 */ 1026 1027 /* 1028 * We mostly have to deal with pointers. 1029 * Thus these typedef's. 1030 */ 1031 typedef struct sym_tcb *tcb_p; 1032 typedef struct sym_lcb *lcb_p; 1033 typedef struct sym_ccb *ccb_p; 1034 typedef struct sym_hcb *hcb_p; 1035 1036 /* 1037 * Gather negotiable parameters value 1038 */ 1039 struct sym_trans { 1040 u8 scsi_version; 1041 u8 spi_version; 1042 u8 period; 1043 u8 offset; 1044 u8 width; 1045 u8 options; /* PPR options */ 1046 }; 1047 1048 struct sym_tinfo { 1049 struct sym_trans current; 1050 struct sym_trans goal; 1051 struct sym_trans user; 1052 }; 1053 1054 #define BUS_8_BIT MSG_EXT_WDTR_BUS_8_BIT 1055 #define BUS_16_BIT MSG_EXT_WDTR_BUS_16_BIT 1056 1057 /* 1058 * Global TCB HEADER. 1059 * 1060 * Due to lack of indirect addressing on earlier NCR chips, 1061 * this substructure is copied from the TCB to a global 1062 * address after selection. 1063 * For SYMBIOS chips that support LOAD/STORE this copy is 1064 * not needed and thus not performed. 1065 */ 1066 struct sym_tcbh { 1067 /* 1068 * Scripts bus addresses of LUN table accessed from scripts. 1069 * LUN #0 is a special case, since multi-lun devices are rare, 1070 * and we we want to speed-up the general case and not waste 1071 * resources. 1072 */ 1073 u32 luntbl_sa; /* bus address of this table */ 1074 u32 lun0_sa; /* bus address of LCB #0 */ 1075 /* 1076 * Actual SYNC/WIDE IO registers value for this target. 1077 * 'sval', 'wval' and 'uval' are read from SCRIPTS and 1078 * so have alignment constraints. 1079 */ 1080 /*0*/ u_char uval; /* -> SCNTL4 register */ 1081 /*1*/ u_char sval; /* -> SXFER io register */ 1082 /*2*/ u_char filler1; 1083 /*3*/ u_char wval; /* -> SCNTL3 io register */ 1084 }; 1085 1086 /* 1087 * Target Control Block 1088 */ 1089 struct sym_tcb { 1090 /* 1091 * TCB header. 1092 * Assumed at offset 0. 1093 */ 1094 /*0*/ struct sym_tcbh head; 1095 1096 /* 1097 * LUN table used by the SCRIPTS processor. 1098 * An array of bus addresses is used on reselection. 1099 */ 1100 u32 *luntbl; /* LCBs bus address table */ 1101 1102 /* 1103 * LUN table used by the C code. 1104 */ 1105 lcb_p lun0p; /* LCB of LUN #0 (usual case) */ 1106 #if SYM_CONF_MAX_LUN > 1 1107 lcb_p *lunmp; /* Other LCBs [1..MAX_LUN] */ 1108 #endif 1109 1110 /* 1111 * Bitmap that tells about LUNs that succeeded at least 1112 * 1 IO and therefore assumed to be a real device. 1113 * Avoid useless allocation of the LCB structure. 1114 */ 1115 u32 lun_map[(SYM_CONF_MAX_LUN+31)/32]; 1116 1117 /* 1118 * Bitmap that tells about LUNs that haven't yet an LCB 1119 * allocated (not discovered or LCB allocation failed). 1120 */ 1121 u32 busy0_map[(SYM_CONF_MAX_LUN+31)/32]; 1122 1123 /* 1124 * Transfer capabilities (SIP) 1125 */ 1126 struct sym_tinfo tinfo; 1127 1128 /* 1129 * Keep track of the CCB used for the negotiation in order 1130 * to ensure that only 1 negotiation is queued at a time. 1131 */ 1132 ccb_p nego_cp; /* CCB used for the nego */ 1133 1134 /* 1135 * Set when we want to reset the device. 1136 */ 1137 u_char to_reset; 1138 1139 /* 1140 * Other user settable limits and options. 1141 * These limits are read from the NVRAM if present. 1142 */ 1143 u_char usrflags; 1144 u_short usrtags; 1145 }; 1146 1147 /* 1148 * Assert some alignments required by the chip. 1149 */ 1150 CTASSERT(((offsetof(struct sym_reg, nc_sxfer) ^ 1151 offsetof(struct sym_tcb, head.sval)) &3) == 0); 1152 CTASSERT(((offsetof(struct sym_reg, nc_scntl3) ^ 1153 offsetof(struct sym_tcb, head.wval)) &3) == 0); 1154 1155 /* 1156 * Global LCB HEADER. 1157 * 1158 * Due to lack of indirect addressing on earlier NCR chips, 1159 * this substructure is copied from the LCB to a global 1160 * address after selection. 1161 * For SYMBIOS chips that support LOAD/STORE this copy is 1162 * not needed and thus not performed. 1163 */ 1164 struct sym_lcbh { 1165 /* 1166 * SCRIPTS address jumped by SCRIPTS on reselection. 1167 * For not probed logical units, this address points to 1168 * SCRIPTS that deal with bad LU handling (must be at 1169 * offset zero of the LCB for that reason). 1170 */ 1171 /*0*/ u32 resel_sa; 1172 1173 /* 1174 * Task (bus address of a CCB) read from SCRIPTS that points 1175 * to the unique ITL nexus allowed to be disconnected. 1176 */ 1177 u32 itl_task_sa; 1178 1179 /* 1180 * Task table bus address (read from SCRIPTS). 1181 */ 1182 u32 itlq_tbl_sa; 1183 }; 1184 1185 /* 1186 * Logical Unit Control Block 1187 */ 1188 struct sym_lcb { 1189 /* 1190 * TCB header. 1191 * Assumed at offset 0. 1192 */ 1193 /*0*/ struct sym_lcbh head; 1194 1195 /* 1196 * Task table read from SCRIPTS that contains pointers to 1197 * ITLQ nexuses. The bus address read from SCRIPTS is 1198 * inside the header. 1199 */ 1200 u32 *itlq_tbl; /* Kernel virtual address */ 1201 1202 /* 1203 * Busy CCBs management. 1204 */ 1205 u_short busy_itlq; /* Number of busy tagged CCBs */ 1206 u_short busy_itl; /* Number of busy untagged CCBs */ 1207 1208 /* 1209 * Circular tag allocation buffer. 1210 */ 1211 u_short ia_tag; /* Tag allocation index */ 1212 u_short if_tag; /* Tag release index */ 1213 u_char *cb_tags; /* Circular tags buffer */ 1214 1215 /* 1216 * Set when we want to clear all tasks. 1217 */ 1218 u_char to_clear; 1219 1220 /* 1221 * Capabilities. 1222 */ 1223 u_char user_flags; 1224 u_char current_flags; 1225 }; 1226 1227 /* 1228 * Action from SCRIPTS on a task. 1229 * Is part of the CCB, but is also used separately to plug 1230 * error handling action to perform from SCRIPTS. 1231 */ 1232 struct sym_actscr { 1233 u32 start; /* Jumped by SCRIPTS after selection */ 1234 u32 restart; /* Jumped by SCRIPTS on relection */ 1235 }; 1236 1237 /* 1238 * Phase mismatch context. 1239 * 1240 * It is part of the CCB and is used as parameters for the 1241 * DATA pointer. We need two contexts to handle correctly the 1242 * SAVED DATA POINTER. 1243 */ 1244 struct sym_pmc { 1245 struct sym_tblmove sg; /* Updated interrupted SG block */ 1246 u32 ret; /* SCRIPT return address */ 1247 }; 1248 1249 /* 1250 * LUN control block lookup. 1251 * We use a direct pointer for LUN #0, and a table of 1252 * pointers which is only allocated for devices that support 1253 * LUN(s) > 0. 1254 */ 1255 #if SYM_CONF_MAX_LUN <= 1 1256 #define sym_lp(tp, lun) (!lun) ? (tp)->lun0p : 0 1257 #else 1258 #define sym_lp(tp, lun) \ 1259 (!lun) ? (tp)->lun0p : (tp)->lunmp ? (tp)->lunmp[(lun)] : 0 1260 #endif 1261 1262 /* 1263 * Status are used by the host and the script processor. 1264 * 1265 * The last four bytes (status[4]) are copied to the 1266 * scratchb register (declared as scr0..scr3) just after the 1267 * select/reselect, and copied back just after disconnecting. 1268 * Inside the script the XX_REG are used. 1269 */ 1270 1271 /* 1272 * Last four bytes (script) 1273 */ 1274 #define QU_REG scr0 1275 #define HS_REG scr1 1276 #define HS_PRT nc_scr1 1277 #define SS_REG scr2 1278 #define SS_PRT nc_scr2 1279 #define HF_REG scr3 1280 #define HF_PRT nc_scr3 1281 1282 /* 1283 * Last four bytes (host) 1284 */ 1285 #define actualquirks phys.head.status[0] 1286 #define host_status phys.head.status[1] 1287 #define ssss_status phys.head.status[2] 1288 #define host_flags phys.head.status[3] 1289 1290 /* 1291 * Host flags 1292 */ 1293 #define HF_IN_PM0 1u 1294 #define HF_IN_PM1 (1u<<1) 1295 #define HF_ACT_PM (1u<<2) 1296 #define HF_DP_SAVED (1u<<3) 1297 #define HF_SENSE (1u<<4) 1298 #define HF_EXT_ERR (1u<<5) 1299 #define HF_DATA_IN (1u<<6) 1300 #ifdef SYM_CONF_IARB_SUPPORT 1301 #define HF_HINT_IARB (1u<<7) 1302 #endif 1303 1304 /* 1305 * Global CCB HEADER. 1306 * 1307 * Due to lack of indirect addressing on earlier NCR chips, 1308 * this substructure is copied from the ccb to a global 1309 * address after selection (or reselection) and copied back 1310 * before disconnect. 1311 * For SYMBIOS chips that support LOAD/STORE this copy is 1312 * not needed and thus not performed. 1313 */ 1314 struct sym_ccbh { 1315 /* 1316 * Start and restart SCRIPTS addresses (must be at 0). 1317 */ 1318 /*0*/ struct sym_actscr go; 1319 1320 /* 1321 * SCRIPTS jump address that deal with data pointers. 1322 * 'savep' points to the position in the script responsible 1323 * for the actual transfer of data. 1324 * It's written on reception of a SAVE_DATA_POINTER message. 1325 */ 1326 u32 savep; /* Jump address to saved data pointer */ 1327 u32 lastp; /* SCRIPTS address at end of data */ 1328 u32 goalp; /* Not accessed for now from SCRIPTS */ 1329 1330 /* 1331 * Status fields. 1332 */ 1333 u8 status[4]; 1334 }; 1335 1336 /* 1337 * Data Structure Block 1338 * 1339 * During execution of a ccb by the script processor, the 1340 * DSA (data structure address) register points to this 1341 * substructure of the ccb. 1342 */ 1343 struct sym_dsb { 1344 /* 1345 * CCB header. 1346 * Also assumed at offset 0 of the sym_ccb structure. 1347 */ 1348 /*0*/ struct sym_ccbh head; 1349 1350 /* 1351 * Phase mismatch contexts. 1352 * We need two to handle correctly the SAVED DATA POINTER. 1353 * MUST BOTH BE AT OFFSET < 256, due to using 8 bit arithmetic 1354 * for address calculation from SCRIPTS. 1355 */ 1356 struct sym_pmc pm0; 1357 struct sym_pmc pm1; 1358 1359 /* 1360 * Table data for Script 1361 */ 1362 struct sym_tblsel select; 1363 struct sym_tblmove smsg; 1364 struct sym_tblmove smsg_ext; 1365 struct sym_tblmove cmd; 1366 struct sym_tblmove sense; 1367 struct sym_tblmove wresid; 1368 struct sym_tblmove data [SYM_CONF_MAX_SG]; 1369 }; 1370 1371 /* 1372 * Our Command Control Block 1373 */ 1374 struct sym_ccb { 1375 /* 1376 * This is the data structure which is pointed by the DSA 1377 * register when it is executed by the script processor. 1378 * It must be the first entry. 1379 */ 1380 struct sym_dsb phys; 1381 1382 /* 1383 * Pointer to CAM ccb and related stuff. 1384 */ 1385 struct callout ch; /* callout handle */ 1386 union ccb *cam_ccb; /* CAM scsiio ccb */ 1387 u8 cdb_buf[16]; /* Copy of CDB */ 1388 u8 *sns_bbuf; /* Bounce buffer for sense data */ 1389 #define SYM_SNS_BBUF_LEN sizeof(struct scsi_sense_data) 1390 int data_len; /* Total data length */ 1391 int segments; /* Number of SG segments */ 1392 1393 /* 1394 * Miscellaneous status'. 1395 */ 1396 u_char nego_status; /* Negotiation status */ 1397 u_char xerr_status; /* Extended error flags */ 1398 u32 extra_bytes; /* Extraneous bytes transferred */ 1399 1400 /* 1401 * Message areas. 1402 * We prepare a message to be sent after selection. 1403 * We may use a second one if the command is rescheduled 1404 * due to CHECK_CONDITION or COMMAND TERMINATED. 1405 * Contents are IDENTIFY and SIMPLE_TAG. 1406 * While negotiating sync or wide transfer, 1407 * a SDTR or WDTR message is appended. 1408 */ 1409 u_char scsi_smsg [12]; 1410 u_char scsi_smsg2[12]; 1411 1412 /* 1413 * Auto request sense related fields. 1414 */ 1415 u_char sensecmd[6]; /* Request Sense command */ 1416 u_char sv_scsi_status; /* Saved SCSI status */ 1417 u_char sv_xerr_status; /* Saved extended status */ 1418 int sv_resid; /* Saved residual */ 1419 1420 /* 1421 * Map for the DMA of user data. 1422 */ 1423 void *arg; /* Argument for some callback */ 1424 bus_dmamap_t dmamap; /* DMA map for user data */ 1425 u_char dmamapped; 1426 #define SYM_DMA_NONE 0 1427 #define SYM_DMA_READ 1 1428 #define SYM_DMA_WRITE 2 1429 /* 1430 * Other fields. 1431 */ 1432 u32 ccb_ba; /* BUS address of this CCB */ 1433 u_short tag; /* Tag for this transfer */ 1434 /* NO_TAG means no tag */ 1435 u_char target; 1436 u_char lun; 1437 ccb_p link_ccbh; /* Host adapter CCB hash chain */ 1438 SYM_QUEHEAD 1439 link_ccbq; /* Link to free/busy CCB queue */ 1440 u32 startp; /* Initial data pointer */ 1441 int ext_sg; /* Extreme data pointer, used */ 1442 int ext_ofs; /* to calculate the residual. */ 1443 u_char to_abort; /* Want this IO to be aborted */ 1444 }; 1445 1446 #define CCB_BA(cp,lbl) (cp->ccb_ba + offsetof(struct sym_ccb, lbl)) 1447 1448 /* 1449 * Host Control Block 1450 */ 1451 struct sym_hcb { 1452 struct mtx mtx; 1453 1454 /* 1455 * Global headers. 1456 * Due to poorness of addressing capabilities, earlier 1457 * chips (810, 815, 825) copy part of the data structures 1458 * (CCB, TCB and LCB) in fixed areas. 1459 */ 1460 #ifdef SYM_CONF_GENERIC_SUPPORT 1461 struct sym_ccbh ccb_head; 1462 struct sym_tcbh tcb_head; 1463 struct sym_lcbh lcb_head; 1464 #endif 1465 /* 1466 * Idle task and invalid task actions and 1467 * their bus addresses. 1468 */ 1469 struct sym_actscr idletask, notask, bad_itl, bad_itlq; 1470 vm_offset_t idletask_ba, notask_ba, bad_itl_ba, bad_itlq_ba; 1471 1472 /* 1473 * Dummy lun table to protect us against target 1474 * returning bad lun number on reselection. 1475 */ 1476 u32 *badluntbl; /* Table physical address */ 1477 u32 badlun_sa; /* SCRIPT handler BUS address */ 1478 1479 /* 1480 * Bus address of this host control block. 1481 */ 1482 u32 hcb_ba; 1483 1484 /* 1485 * Bit 32-63 of the on-chip RAM bus address in LE format. 1486 * The START_RAM64 script loads the MMRS and MMWS from this 1487 * field. 1488 */ 1489 u32 scr_ram_seg; 1490 1491 /* 1492 * Chip and controller indentification. 1493 */ 1494 device_t device; 1495 1496 /* 1497 * Initial value of some IO register bits. 1498 * These values are assumed to have been set by BIOS, and may 1499 * be used to probe adapter implementation differences. 1500 */ 1501 u_char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest3, sv_ctest4, 1502 sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4, sv_scntl4, 1503 sv_stest1; 1504 1505 /* 1506 * Actual initial value of IO register bits used by the 1507 * driver. They are loaded at initialisation according to 1508 * features that are to be enabled/disabled. 1509 */ 1510 u_char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest3, rv_ctest4, 1511 rv_ctest5, rv_stest2, rv_ccntl0, rv_ccntl1, rv_scntl4; 1512 1513 /* 1514 * Target data. 1515 */ 1516 #ifdef __amd64__ 1517 struct sym_tcb *target; 1518 #else 1519 struct sym_tcb target[SYM_CONF_MAX_TARGET]; 1520 #endif 1521 1522 /* 1523 * Target control block bus address array used by the SCRIPT 1524 * on reselection. 1525 */ 1526 u32 *targtbl; 1527 u32 targtbl_ba; 1528 1529 /* 1530 * CAM SIM information for this instance. 1531 */ 1532 struct cam_sim *sim; 1533 struct cam_path *path; 1534 1535 /* 1536 * Allocated hardware resources. 1537 */ 1538 struct resource *irq_res; 1539 struct resource *io_res; 1540 struct resource *mmio_res; 1541 struct resource *ram_res; 1542 int ram_id; 1543 void *intr; 1544 1545 /* 1546 * Bus stuff. 1547 * 1548 * My understanding of PCI is that all agents must share the 1549 * same addressing range and model. 1550 * But some hardware architecture guys provide complex and 1551 * brain-deaded stuff that makes shit. 1552 * This driver only support PCI compliant implementations and 1553 * deals with part of the BUS stuff complexity only to fit O/S 1554 * requirements. 1555 */ 1556 1557 /* 1558 * DMA stuff. 1559 */ 1560 bus_dma_tag_t bus_dmat; /* DMA tag from parent BUS */ 1561 bus_dma_tag_t data_dmat; /* DMA tag for user data */ 1562 /* 1563 * BUS addresses of the chip 1564 */ 1565 vm_offset_t mmio_ba; /* MMIO BUS address */ 1566 int mmio_ws; /* MMIO Window size */ 1567 1568 vm_offset_t ram_ba; /* RAM BUS address */ 1569 int ram_ws; /* RAM window size */ 1570 1571 /* 1572 * SCRIPTS virtual and physical bus addresses. 1573 * 'script' is loaded in the on-chip RAM if present. 1574 * 'scripth' stays in main memory for all chips except the 1575 * 53C895A, 53C896 and 53C1010 that provide 8K on-chip RAM. 1576 */ 1577 u_char *scripta0; /* Copies of script and scripth */ 1578 u_char *scriptb0; /* Copies of script and scripth */ 1579 vm_offset_t scripta_ba; /* Actual script and scripth */ 1580 vm_offset_t scriptb_ba; /* bus addresses. */ 1581 vm_offset_t scriptb0_ba; 1582 u_short scripta_sz; /* Actual size of script A */ 1583 u_short scriptb_sz; /* Actual size of script B */ 1584 1585 /* 1586 * Bus addresses, setup and patch methods for 1587 * the selected firmware. 1588 */ 1589 struct sym_fwa_ba fwa_bas; /* Useful SCRIPTA bus addresses */ 1590 struct sym_fwb_ba fwb_bas; /* Useful SCRIPTB bus addresses */ 1591 void (*fw_setup)(hcb_p np, const struct sym_fw *fw); 1592 void (*fw_patch)(hcb_p np); 1593 const char *fw_name; 1594 1595 /* 1596 * General controller parameters and configuration. 1597 */ 1598 u_short device_id; /* PCI device id */ 1599 u_char revision_id; /* PCI device revision id */ 1600 u_int features; /* Chip features map */ 1601 u_char myaddr; /* SCSI id of the adapter */ 1602 u_char maxburst; /* log base 2 of dwords burst */ 1603 u_char maxwide; /* Maximum transfer width */ 1604 u_char minsync; /* Min sync period factor (ST) */ 1605 u_char maxsync; /* Max sync period factor (ST) */ 1606 u_char maxoffs; /* Max scsi offset (ST) */ 1607 u_char minsync_dt; /* Min sync period factor (DT) */ 1608 u_char maxsync_dt; /* Max sync period factor (DT) */ 1609 u_char maxoffs_dt; /* Max scsi offset (DT) */ 1610 u_char multiplier; /* Clock multiplier (1,2,4) */ 1611 u_char clock_divn; /* Number of clock divisors */ 1612 u32 clock_khz; /* SCSI clock frequency in KHz */ 1613 u32 pciclk_khz; /* Estimated PCI clock in KHz */ 1614 /* 1615 * Start queue management. 1616 * It is filled up by the host processor and accessed by the 1617 * SCRIPTS processor in order to start SCSI commands. 1618 */ 1619 volatile /* Prevent code optimizations */ 1620 u32 *squeue; /* Start queue virtual address */ 1621 u32 squeue_ba; /* Start queue BUS address */ 1622 u_short squeueput; /* Next free slot of the queue */ 1623 u_short actccbs; /* Number of allocated CCBs */ 1624 1625 /* 1626 * Command completion queue. 1627 * It is the same size as the start queue to avoid overflow. 1628 */ 1629 u_short dqueueget; /* Next position to scan */ 1630 volatile /* Prevent code optimizations */ 1631 u32 *dqueue; /* Completion (done) queue */ 1632 u32 dqueue_ba; /* Done queue BUS address */ 1633 1634 /* 1635 * Miscellaneous buffers accessed by the scripts-processor. 1636 * They shall be DWORD aligned, because they may be read or 1637 * written with a script command. 1638 */ 1639 u_char msgout[8]; /* Buffer for MESSAGE OUT */ 1640 u_char msgin [8]; /* Buffer for MESSAGE IN */ 1641 u32 lastmsg; /* Last SCSI message sent */ 1642 u_char scratch; /* Scratch for SCSI receive */ 1643 1644 /* 1645 * Miscellaneous configuration and status parameters. 1646 */ 1647 u_char usrflags; /* Miscellaneous user flags */ 1648 u_char scsi_mode; /* Current SCSI BUS mode */ 1649 u_char verbose; /* Verbosity for this controller*/ 1650 u32 cache; /* Used for cache test at init. */ 1651 1652 /* 1653 * CCB lists and queue. 1654 */ 1655 ccb_p ccbh[CCB_HASH_SIZE]; /* CCB hashed by DSA value */ 1656 SYM_QUEHEAD free_ccbq; /* Queue of available CCBs */ 1657 SYM_QUEHEAD busy_ccbq; /* Queue of busy CCBs */ 1658 1659 /* 1660 * During error handling and/or recovery, 1661 * active CCBs that are to be completed with 1662 * error or requeued are moved from the busy_ccbq 1663 * to the comp_ccbq prior to completion. 1664 */ 1665 SYM_QUEHEAD comp_ccbq; 1666 1667 /* 1668 * CAM CCB pending queue. 1669 */ 1670 SYM_QUEHEAD cam_ccbq; 1671 1672 /* 1673 * IMMEDIATE ARBITRATION (IARB) control. 1674 * 1675 * We keep track in 'last_cp' of the last CCB that has been 1676 * queued to the SCRIPTS processor and clear 'last_cp' when 1677 * this CCB completes. If last_cp is not zero at the moment 1678 * we queue a new CCB, we set a flag in 'last_cp' that is 1679 * used by the SCRIPTS as a hint for setting IARB. 1680 * We donnot set more than 'iarb_max' consecutive hints for 1681 * IARB in order to leave devices a chance to reselect. 1682 * By the way, any non zero value of 'iarb_max' is unfair. :) 1683 */ 1684 #ifdef SYM_CONF_IARB_SUPPORT 1685 u_short iarb_max; /* Max. # consecutive IARB hints*/ 1686 u_short iarb_count; /* Actual # of these hints */ 1687 ccb_p last_cp; 1688 #endif 1689 1690 /* 1691 * Command abort handling. 1692 * We need to synchronize tightly with the SCRIPTS 1693 * processor in order to handle things correctly. 1694 */ 1695 u_char abrt_msg[4]; /* Message to send buffer */ 1696 struct sym_tblmove abrt_tbl; /* Table for the MOV of it */ 1697 struct sym_tblsel abrt_sel; /* Sync params for selection */ 1698 u_char istat_sem; /* Tells the chip to stop (SEM) */ 1699 }; 1700 1701 #define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl)) 1702 1703 /* 1704 * Return the name of the controller. 1705 */ 1706 static __inline const char *sym_name(hcb_p np) 1707 { 1708 return device_get_nameunit(np->device); 1709 } 1710 1711 /*--------------------------------------------------------------------------*/ 1712 /*------------------------------ FIRMWARES ---------------------------------*/ 1713 /*--------------------------------------------------------------------------*/ 1714 1715 /* 1716 * This stuff will be moved to a separate source file when 1717 * the driver will be broken into several source modules. 1718 */ 1719 1720 /* 1721 * Macros used for all firmwares. 1722 */ 1723 #define SYM_GEN_A(s, label) ((short) offsetof(s, label)), 1724 #define SYM_GEN_B(s, label) ((short) offsetof(s, label)), 1725 #define PADDR_A(label) SYM_GEN_PADDR_A(struct SYM_FWA_SCR, label) 1726 #define PADDR_B(label) SYM_GEN_PADDR_B(struct SYM_FWB_SCR, label) 1727 1728 #ifdef SYM_CONF_GENERIC_SUPPORT 1729 /* 1730 * Allocate firmware #1 script area. 1731 */ 1732 #define SYM_FWA_SCR sym_fw1a_scr 1733 #define SYM_FWB_SCR sym_fw1b_scr 1734 #include <dev/sym/sym_fw1.h> 1735 static const struct sym_fwa_ofs sym_fw1a_ofs = { 1736 SYM_GEN_FW_A(struct SYM_FWA_SCR) 1737 }; 1738 static const struct sym_fwb_ofs sym_fw1b_ofs = { 1739 SYM_GEN_FW_B(struct SYM_FWB_SCR) 1740 }; 1741 #undef SYM_FWA_SCR 1742 #undef SYM_FWB_SCR 1743 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1744 1745 /* 1746 * Allocate firmware #2 script area. 1747 */ 1748 #define SYM_FWA_SCR sym_fw2a_scr 1749 #define SYM_FWB_SCR sym_fw2b_scr 1750 #include <dev/sym/sym_fw2.h> 1751 static const struct sym_fwa_ofs sym_fw2a_ofs = { 1752 SYM_GEN_FW_A(struct SYM_FWA_SCR) 1753 }; 1754 static const struct sym_fwb_ofs sym_fw2b_ofs = { 1755 SYM_GEN_FW_B(struct SYM_FWB_SCR) 1756 SYM_GEN_B(struct SYM_FWB_SCR, start64) 1757 SYM_GEN_B(struct SYM_FWB_SCR, pm_handle) 1758 }; 1759 #undef SYM_FWA_SCR 1760 #undef SYM_FWB_SCR 1761 1762 #undef SYM_GEN_A 1763 #undef SYM_GEN_B 1764 #undef PADDR_A 1765 #undef PADDR_B 1766 1767 #ifdef SYM_CONF_GENERIC_SUPPORT 1768 /* 1769 * Patch routine for firmware #1. 1770 */ 1771 static void 1772 sym_fw1_patch(hcb_p np) 1773 { 1774 struct sym_fw1a_scr *scripta0; 1775 struct sym_fw1b_scr *scriptb0; 1776 1777 scripta0 = (struct sym_fw1a_scr *) np->scripta0; 1778 scriptb0 = (struct sym_fw1b_scr *) np->scriptb0; 1779 1780 /* 1781 * Remove LED support if not needed. 1782 */ 1783 if (!(np->features & FE_LED0)) { 1784 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP); 1785 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP); 1786 scripta0->start[0] = cpu_to_scr(SCR_NO_OP); 1787 } 1788 1789 #ifdef SYM_CONF_IARB_SUPPORT 1790 /* 1791 * If user does not want to use IMMEDIATE ARBITRATION 1792 * when we are reselected while attempting to arbitrate, 1793 * patch the SCRIPTS accordingly with a SCRIPT NO_OP. 1794 */ 1795 if (!SYM_CONF_SET_IARB_ON_ARB_LOST) 1796 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP); 1797 #endif 1798 /* 1799 * Patch some data in SCRIPTS. 1800 * - start and done queue initial bus address. 1801 * - target bus address table bus address. 1802 */ 1803 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba); 1804 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba); 1805 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba); 1806 } 1807 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1808 1809 /* 1810 * Patch routine for firmware #2. 1811 */ 1812 static void 1813 sym_fw2_patch(hcb_p np) 1814 { 1815 struct sym_fw2a_scr *scripta0; 1816 struct sym_fw2b_scr *scriptb0; 1817 1818 scripta0 = (struct sym_fw2a_scr *) np->scripta0; 1819 scriptb0 = (struct sym_fw2b_scr *) np->scriptb0; 1820 1821 /* 1822 * Remove LED support if not needed. 1823 */ 1824 if (!(np->features & FE_LED0)) { 1825 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP); 1826 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP); 1827 scripta0->start[0] = cpu_to_scr(SCR_NO_OP); 1828 } 1829 1830 #ifdef SYM_CONF_IARB_SUPPORT 1831 /* 1832 * If user does not want to use IMMEDIATE ARBITRATION 1833 * when we are reselected while attempting to arbitrate, 1834 * patch the SCRIPTS accordingly with a SCRIPT NO_OP. 1835 */ 1836 if (!SYM_CONF_SET_IARB_ON_ARB_LOST) 1837 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP); 1838 #endif 1839 /* 1840 * Patch some variable in SCRIPTS. 1841 * - start and done queue initial bus address. 1842 * - target bus address table bus address. 1843 */ 1844 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba); 1845 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba); 1846 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba); 1847 1848 /* 1849 * Remove the load of SCNTL4 on reselection if not a C10. 1850 */ 1851 if (!(np->features & FE_C10)) { 1852 scripta0->resel_scntl4[0] = cpu_to_scr(SCR_NO_OP); 1853 scripta0->resel_scntl4[1] = cpu_to_scr(0); 1854 } 1855 1856 /* 1857 * Remove a couple of work-arounds specific to C1010 if 1858 * they are not desirable. See `sym_fw2.h' for more details. 1859 */ 1860 if (!(np->device_id == PCI_ID_LSI53C1010_2 && 1861 np->revision_id < 0x1 && 1862 np->pciclk_khz < 60000)) { 1863 scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP); 1864 scripta0->datao_phase[1] = cpu_to_scr(0); 1865 } 1866 if (!(np->device_id == PCI_ID_LSI53C1010 && 1867 /* np->revision_id < 0xff */ 1)) { 1868 scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP); 1869 scripta0->sel_done[1] = cpu_to_scr(0); 1870 } 1871 1872 /* 1873 * Patch some other variables in SCRIPTS. 1874 * These ones are loaded by the SCRIPTS processor. 1875 */ 1876 scriptb0->pm0_data_addr[0] = 1877 cpu_to_scr(np->scripta_ba + 1878 offsetof(struct sym_fw2a_scr, pm0_data)); 1879 scriptb0->pm1_data_addr[0] = 1880 cpu_to_scr(np->scripta_ba + 1881 offsetof(struct sym_fw2a_scr, pm1_data)); 1882 } 1883 1884 /* 1885 * Fill the data area in scripts. 1886 * To be done for all firmwares. 1887 */ 1888 static void 1889 sym_fw_fill_data (u32 *in, u32 *out) 1890 { 1891 int i; 1892 1893 for (i = 0; i < SYM_CONF_MAX_SG; i++) { 1894 *in++ = SCR_CHMOV_TBL ^ SCR_DATA_IN; 1895 *in++ = offsetof (struct sym_dsb, data[i]); 1896 *out++ = SCR_CHMOV_TBL ^ SCR_DATA_OUT; 1897 *out++ = offsetof (struct sym_dsb, data[i]); 1898 } 1899 } 1900 1901 /* 1902 * Setup useful script bus addresses. 1903 * To be done for all firmwares. 1904 */ 1905 static void 1906 sym_fw_setup_bus_addresses(hcb_p np, const struct sym_fw *fw) 1907 { 1908 u32 *pa; 1909 const u_short *po; 1910 int i; 1911 1912 /* 1913 * Build the bus address table for script A 1914 * from the script A offset table. 1915 */ 1916 po = (const u_short *) fw->a_ofs; 1917 pa = (u32 *) &np->fwa_bas; 1918 for (i = 0 ; i < sizeof(np->fwa_bas)/sizeof(u32) ; i++) 1919 pa[i] = np->scripta_ba + po[i]; 1920 1921 /* 1922 * Same for script B. 1923 */ 1924 po = (const u_short *) fw->b_ofs; 1925 pa = (u32 *) &np->fwb_bas; 1926 for (i = 0 ; i < sizeof(np->fwb_bas)/sizeof(u32) ; i++) 1927 pa[i] = np->scriptb_ba + po[i]; 1928 } 1929 1930 #ifdef SYM_CONF_GENERIC_SUPPORT 1931 /* 1932 * Setup routine for firmware #1. 1933 */ 1934 static void 1935 sym_fw1_setup(hcb_p np, const struct sym_fw *fw) 1936 { 1937 struct sym_fw1a_scr *scripta0; 1938 1939 scripta0 = (struct sym_fw1a_scr *) np->scripta0; 1940 1941 /* 1942 * Fill variable parts in scripts. 1943 */ 1944 sym_fw_fill_data(scripta0->data_in, scripta0->data_out); 1945 1946 /* 1947 * Setup bus addresses used from the C code.. 1948 */ 1949 sym_fw_setup_bus_addresses(np, fw); 1950 } 1951 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1952 1953 /* 1954 * Setup routine for firmware #2. 1955 */ 1956 static void 1957 sym_fw2_setup(hcb_p np, const struct sym_fw *fw) 1958 { 1959 struct sym_fw2a_scr *scripta0; 1960 1961 scripta0 = (struct sym_fw2a_scr *) np->scripta0; 1962 1963 /* 1964 * Fill variable parts in scripts. 1965 */ 1966 sym_fw_fill_data(scripta0->data_in, scripta0->data_out); 1967 1968 /* 1969 * Setup bus addresses used from the C code.. 1970 */ 1971 sym_fw_setup_bus_addresses(np, fw); 1972 } 1973 1974 /* 1975 * Allocate firmware descriptors. 1976 */ 1977 #ifdef SYM_CONF_GENERIC_SUPPORT 1978 static const struct sym_fw sym_fw1 = SYM_FW_ENTRY(sym_fw1, "NCR-generic"); 1979 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1980 static const struct sym_fw sym_fw2 = SYM_FW_ENTRY(sym_fw2, "LOAD/STORE-based"); 1981 1982 /* 1983 * Find the most appropriate firmware for a chip. 1984 */ 1985 static const struct sym_fw * 1986 sym_find_firmware(const struct sym_pci_chip *chip) 1987 { 1988 if (chip->features & FE_LDSTR) 1989 return &sym_fw2; 1990 #ifdef SYM_CONF_GENERIC_SUPPORT 1991 else if (!(chip->features & (FE_PFEN|FE_NOPM|FE_DAC))) 1992 return &sym_fw1; 1993 #endif 1994 else 1995 return NULL; 1996 } 1997 1998 /* 1999 * Bind a script to physical addresses. 2000 */ 2001 static void sym_fw_bind_script (hcb_p np, u32 *start, int len) 2002 { 2003 u32 opcode, new, old, tmp1, tmp2; 2004 u32 *end, *cur; 2005 int relocs; 2006 2007 cur = start; 2008 end = start + len/4; 2009 2010 while (cur < end) { 2011 2012 opcode = *cur; 2013 2014 /* 2015 * If we forget to change the length 2016 * in scripts, a field will be 2017 * padded with 0. This is an illegal 2018 * command. 2019 */ 2020 if (opcode == 0) { 2021 printf ("%s: ERROR0 IN SCRIPT at %d.\n", 2022 sym_name(np), (int) (cur-start)); 2023 MDELAY (10000); 2024 ++cur; 2025 continue; 2026 }; 2027 2028 /* 2029 * We use the bogus value 0xf00ff00f ;-) 2030 * to reserve data area in SCRIPTS. 2031 */ 2032 if (opcode == SCR_DATA_ZERO) { 2033 *cur++ = 0; 2034 continue; 2035 } 2036 2037 if (DEBUG_FLAGS & DEBUG_SCRIPT) 2038 printf ("%d: <%x>\n", (int) (cur-start), 2039 (unsigned)opcode); 2040 2041 /* 2042 * We don't have to decode ALL commands 2043 */ 2044 switch (opcode >> 28) { 2045 case 0xf: 2046 /* 2047 * LOAD / STORE DSA relative, don't relocate. 2048 */ 2049 relocs = 0; 2050 break; 2051 case 0xe: 2052 /* 2053 * LOAD / STORE absolute. 2054 */ 2055 relocs = 1; 2056 break; 2057 case 0xc: 2058 /* 2059 * COPY has TWO arguments. 2060 */ 2061 relocs = 2; 2062 tmp1 = cur[1]; 2063 tmp2 = cur[2]; 2064 if ((tmp1 ^ tmp2) & 3) { 2065 printf ("%s: ERROR1 IN SCRIPT at %d.\n", 2066 sym_name(np), (int) (cur-start)); 2067 MDELAY (10000); 2068 } 2069 /* 2070 * If PREFETCH feature not enabled, remove 2071 * the NO FLUSH bit if present. 2072 */ 2073 if ((opcode & SCR_NO_FLUSH) && 2074 !(np->features & FE_PFEN)) { 2075 opcode = (opcode & ~SCR_NO_FLUSH); 2076 } 2077 break; 2078 case 0x0: 2079 /* 2080 * MOVE/CHMOV (absolute address) 2081 */ 2082 if (!(np->features & FE_WIDE)) 2083 opcode = (opcode | OPC_MOVE); 2084 relocs = 1; 2085 break; 2086 case 0x1: 2087 /* 2088 * MOVE/CHMOV (table indirect) 2089 */ 2090 if (!(np->features & FE_WIDE)) 2091 opcode = (opcode | OPC_MOVE); 2092 relocs = 0; 2093 break; 2094 case 0x8: 2095 /* 2096 * JUMP / CALL 2097 * dont't relocate if relative :-) 2098 */ 2099 if (opcode & 0x00800000) 2100 relocs = 0; 2101 else if ((opcode & 0xf8400000) == 0x80400000)/*JUMP64*/ 2102 relocs = 2; 2103 else 2104 relocs = 1; 2105 break; 2106 case 0x4: 2107 case 0x5: 2108 case 0x6: 2109 case 0x7: 2110 relocs = 1; 2111 break; 2112 default: 2113 relocs = 0; 2114 break; 2115 }; 2116 2117 /* 2118 * Scriptify:) the opcode. 2119 */ 2120 *cur++ = cpu_to_scr(opcode); 2121 2122 /* 2123 * If no relocation, assume 1 argument 2124 * and just scriptize:) it. 2125 */ 2126 if (!relocs) { 2127 *cur = cpu_to_scr(*cur); 2128 ++cur; 2129 continue; 2130 } 2131 2132 /* 2133 * Otherwise performs all needed relocations. 2134 */ 2135 while (relocs--) { 2136 old = *cur; 2137 2138 switch (old & RELOC_MASK) { 2139 case RELOC_REGISTER: 2140 new = (old & ~RELOC_MASK) + np->mmio_ba; 2141 break; 2142 case RELOC_LABEL_A: 2143 new = (old & ~RELOC_MASK) + np->scripta_ba; 2144 break; 2145 case RELOC_LABEL_B: 2146 new = (old & ~RELOC_MASK) + np->scriptb_ba; 2147 break; 2148 case RELOC_SOFTC: 2149 new = (old & ~RELOC_MASK) + np->hcb_ba; 2150 break; 2151 case 0: 2152 /* 2153 * Don't relocate a 0 address. 2154 * They are mostly used for patched or 2155 * script self-modified areas. 2156 */ 2157 if (old == 0) { 2158 new = old; 2159 break; 2160 } 2161 /* fall through */ 2162 default: 2163 new = 0; 2164 panic("sym_fw_bind_script: " 2165 "weird relocation %x\n", old); 2166 break; 2167 } 2168 2169 *cur++ = cpu_to_scr(new); 2170 } 2171 }; 2172 } 2173 2174 /*---------------------------------------------------------------------------*/ 2175 /*--------------------------- END OF FIRMWARES -----------------------------*/ 2176 /*---------------------------------------------------------------------------*/ 2177 2178 /* 2179 * Function prototypes. 2180 */ 2181 static void sym_save_initial_setting (hcb_p np); 2182 static int sym_prepare_setting (hcb_p np, struct sym_nvram *nvram); 2183 static int sym_prepare_nego (hcb_p np, ccb_p cp, int nego, u_char *msgptr); 2184 static void sym_put_start_queue (hcb_p np, ccb_p cp); 2185 static void sym_chip_reset (hcb_p np); 2186 static void sym_soft_reset (hcb_p np); 2187 static void sym_start_reset (hcb_p np); 2188 static int sym_reset_scsi_bus (hcb_p np, int enab_int); 2189 static int sym_wakeup_done (hcb_p np); 2190 static void sym_flush_busy_queue (hcb_p np, int cam_status); 2191 static void sym_flush_comp_queue (hcb_p np, int cam_status); 2192 static void sym_init (hcb_p np, int reason); 2193 static int sym_getsync(hcb_p np, u_char dt, u_char sfac, u_char *divp, 2194 u_char *fakp); 2195 static void sym_setsync (hcb_p np, ccb_p cp, u_char ofs, u_char per, 2196 u_char div, u_char fak); 2197 static void sym_setwide (hcb_p np, ccb_p cp, u_char wide); 2198 static void sym_setpprot(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 2199 u_char per, u_char wide, u_char div, u_char fak); 2200 static void sym_settrans(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 2201 u_char per, u_char wide, u_char div, u_char fak); 2202 static void sym_log_hard_error (hcb_p np, u_short sist, u_char dstat); 2203 static void sym_intr (void *arg); 2204 static void sym_poll (struct cam_sim *sim); 2205 static void sym_recover_scsi_int (hcb_p np, u_char hsts); 2206 static void sym_int_sto (hcb_p np); 2207 static void sym_int_udc (hcb_p np); 2208 static void sym_int_sbmc (hcb_p np); 2209 static void sym_int_par (hcb_p np, u_short sist); 2210 static void sym_int_ma (hcb_p np); 2211 static int sym_dequeue_from_squeue(hcb_p np, int i, int target, int lun, 2212 int task); 2213 static void sym_sir_bad_scsi_status (hcb_p np, ccb_p cp); 2214 static int sym_clear_tasks (hcb_p np, int status, int targ, int lun, int task); 2215 static void sym_sir_task_recovery (hcb_p np, int num); 2216 static int sym_evaluate_dp (hcb_p np, ccb_p cp, u32 scr, int *ofs); 2217 static void sym_modify_dp(hcb_p np, ccb_p cp, int ofs); 2218 static int sym_compute_residual (hcb_p np, ccb_p cp); 2219 static int sym_show_msg (u_char * msg); 2220 static void sym_print_msg (ccb_p cp, char *label, u_char *msg); 2221 static void sym_sync_nego (hcb_p np, tcb_p tp, ccb_p cp); 2222 static void sym_ppr_nego (hcb_p np, tcb_p tp, ccb_p cp); 2223 static void sym_wide_nego (hcb_p np, tcb_p tp, ccb_p cp); 2224 static void sym_nego_default (hcb_p np, tcb_p tp, ccb_p cp); 2225 static void sym_nego_rejected (hcb_p np, tcb_p tp, ccb_p cp); 2226 static void sym_int_sir (hcb_p np); 2227 static void sym_free_ccb (hcb_p np, ccb_p cp); 2228 static ccb_p sym_get_ccb (hcb_p np, u_char tn, u_char ln, u_char tag_order); 2229 static ccb_p sym_alloc_ccb (hcb_p np); 2230 static ccb_p sym_ccb_from_dsa (hcb_p np, u32 dsa); 2231 static lcb_p sym_alloc_lcb (hcb_p np, u_char tn, u_char ln); 2232 static void sym_alloc_lcb_tags (hcb_p np, u_char tn, u_char ln); 2233 static int sym_snooptest (hcb_p np); 2234 static void sym_selectclock(hcb_p np, u_char scntl3); 2235 static void sym_getclock (hcb_p np, int mult); 2236 static int sym_getpciclock (hcb_p np); 2237 static void sym_complete_ok (hcb_p np, ccb_p cp); 2238 static void sym_complete_error (hcb_p np, ccb_p cp); 2239 static void sym_callout (void *arg); 2240 static int sym_abort_scsiio (hcb_p np, union ccb *ccb, int timed_out); 2241 static void sym_reset_dev (hcb_p np, union ccb *ccb); 2242 static void sym_action (struct cam_sim *sim, union ccb *ccb); 2243 static int sym_setup_cdb (hcb_p np, struct ccb_scsiio *csio, ccb_p cp); 2244 static void sym_setup_data_and_start (hcb_p np, struct ccb_scsiio *csio, 2245 ccb_p cp); 2246 static int sym_fast_scatter_sg_physical(hcb_p np, ccb_p cp, 2247 bus_dma_segment_t *psegs, int nsegs); 2248 static int sym_scatter_sg_physical (hcb_p np, ccb_p cp, 2249 bus_dma_segment_t *psegs, int nsegs); 2250 static void sym_action2 (struct cam_sim *sim, union ccb *ccb); 2251 static void sym_update_trans(hcb_p np, struct sym_trans *tip, 2252 struct ccb_trans_settings *cts); 2253 static void sym_update_dflags(hcb_p np, u_char *flags, 2254 struct ccb_trans_settings *cts); 2255 2256 static const struct sym_pci_chip *sym_find_pci_chip (device_t dev); 2257 static int sym_pci_probe (device_t dev); 2258 static int sym_pci_attach (device_t dev); 2259 2260 static void sym_pci_free (hcb_p np); 2261 static int sym_cam_attach (hcb_p np); 2262 static void sym_cam_free (hcb_p np); 2263 2264 static void sym_nvram_setup_host (hcb_p np, struct sym_nvram *nvram); 2265 static void sym_nvram_setup_target (hcb_p np, int targ, struct sym_nvram *nvp); 2266 static int sym_read_nvram (hcb_p np, struct sym_nvram *nvp); 2267 2268 /* 2269 * Print something which allows to retrieve the controller type, 2270 * unit, target, lun concerned by a kernel message. 2271 */ 2272 static void PRINT_TARGET (hcb_p np, int target) 2273 { 2274 printf ("%s:%d:", sym_name(np), target); 2275 } 2276 2277 static void PRINT_LUN(hcb_p np, int target, int lun) 2278 { 2279 printf ("%s:%d:%d:", sym_name(np), target, lun); 2280 } 2281 2282 static void PRINT_ADDR (ccb_p cp) 2283 { 2284 if (cp && cp->cam_ccb) 2285 xpt_print_path(cp->cam_ccb->ccb_h.path); 2286 } 2287 2288 /* 2289 * Take into account this ccb in the freeze count. 2290 */ 2291 static void sym_freeze_cam_ccb(union ccb *ccb) 2292 { 2293 if (!(ccb->ccb_h.flags & CAM_DEV_QFRZDIS)) { 2294 if (!(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 2295 ccb->ccb_h.status |= CAM_DEV_QFRZN; 2296 xpt_freeze_devq(ccb->ccb_h.path, 1); 2297 } 2298 } 2299 } 2300 2301 /* 2302 * Set the status field of a CAM CCB. 2303 */ 2304 static __inline void sym_set_cam_status(union ccb *ccb, cam_status status) 2305 { 2306 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2307 ccb->ccb_h.status |= status; 2308 } 2309 2310 /* 2311 * Get the status field of a CAM CCB. 2312 */ 2313 static __inline int sym_get_cam_status(union ccb *ccb) 2314 { 2315 return ccb->ccb_h.status & CAM_STATUS_MASK; 2316 } 2317 2318 /* 2319 * Enqueue a CAM CCB. 2320 */ 2321 static void sym_enqueue_cam_ccb(ccb_p cp) 2322 { 2323 hcb_p np; 2324 union ccb *ccb; 2325 2326 ccb = cp->cam_ccb; 2327 np = (hcb_p) cp->arg; 2328 2329 assert(!(ccb->ccb_h.status & CAM_SIM_QUEUED)); 2330 ccb->ccb_h.status = CAM_REQ_INPROG; 2331 2332 callout_reset_sbt(&cp->ch, SBT_1MS * ccb->ccb_h.timeout, 0, sym_callout, 2333 (caddr_t)ccb, 0); 2334 ccb->ccb_h.status |= CAM_SIM_QUEUED; 2335 ccb->ccb_h.sym_hcb_ptr = np; 2336 2337 sym_insque_tail(sym_qptr(&ccb->ccb_h.sim_links), &np->cam_ccbq); 2338 } 2339 2340 /* 2341 * Complete a pending CAM CCB. 2342 */ 2343 2344 static void sym_xpt_done(hcb_p np, union ccb *ccb, ccb_p cp) 2345 { 2346 2347 SYM_LOCK_ASSERT(MA_OWNED); 2348 2349 if (ccb->ccb_h.status & CAM_SIM_QUEUED) { 2350 callout_stop(&cp->ch); 2351 sym_remque(sym_qptr(&ccb->ccb_h.sim_links)); 2352 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2353 ccb->ccb_h.sym_hcb_ptr = NULL; 2354 } 2355 xpt_done(ccb); 2356 } 2357 2358 static void sym_xpt_done2(hcb_p np, union ccb *ccb, int cam_status) 2359 { 2360 2361 SYM_LOCK_ASSERT(MA_OWNED); 2362 2363 sym_set_cam_status(ccb, cam_status); 2364 xpt_done(ccb); 2365 } 2366 2367 /* 2368 * SYMBIOS chip clock divisor table. 2369 * 2370 * Divisors are multiplied by 10,000,000 in order to make 2371 * calculations more simple. 2372 */ 2373 #define _5M 5000000 2374 static const u32 div_10M[] = 2375 {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; 2376 2377 /* 2378 * SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64, 2379 * 128 transfers. All chips support at least 16 transfers 2380 * bursts. The 825A, 875 and 895 chips support bursts of up 2381 * to 128 transfers and the 895A and 896 support bursts of up 2382 * to 64 transfers. All other chips support up to 16 2383 * transfers bursts. 2384 * 2385 * For PCI 32 bit data transfers each transfer is a DWORD. 2386 * It is a QUADWORD (8 bytes) for PCI 64 bit data transfers. 2387 * 2388 * We use log base 2 (burst length) as internal code, with 2389 * value 0 meaning "burst disabled". 2390 */ 2391 2392 /* 2393 * Burst length from burst code. 2394 */ 2395 #define burst_length(bc) (!(bc))? 0 : 1 << (bc) 2396 2397 /* 2398 * Burst code from io register bits. 2399 */ 2400 #define burst_code(dmode, ctest4, ctest5) \ 2401 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1 2402 2403 /* 2404 * Set initial io register bits from burst code. 2405 */ 2406 static __inline void sym_init_burst(hcb_p np, u_char bc) 2407 { 2408 np->rv_ctest4 &= ~0x80; 2409 np->rv_dmode &= ~(0x3 << 6); 2410 np->rv_ctest5 &= ~0x4; 2411 2412 if (!bc) { 2413 np->rv_ctest4 |= 0x80; 2414 } 2415 else { 2416 --bc; 2417 np->rv_dmode |= ((bc & 0x3) << 6); 2418 np->rv_ctest5 |= (bc & 0x4); 2419 } 2420 } 2421 2422 /* 2423 * Print out the list of targets that have some flag disabled by user. 2424 */ 2425 static void sym_print_targets_flag(hcb_p np, int mask, char *msg) 2426 { 2427 int cnt; 2428 int i; 2429 2430 for (cnt = 0, i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 2431 if (i == np->myaddr) 2432 continue; 2433 if (np->target[i].usrflags & mask) { 2434 if (!cnt++) 2435 printf("%s: %s disabled for targets", 2436 sym_name(np), msg); 2437 printf(" %d", i); 2438 } 2439 } 2440 if (cnt) 2441 printf(".\n"); 2442 } 2443 2444 /* 2445 * Save initial settings of some IO registers. 2446 * Assumed to have been set by BIOS. 2447 * We cannot reset the chip prior to reading the 2448 * IO registers, since informations will be lost. 2449 * Since the SCRIPTS processor may be running, this 2450 * is not safe on paper, but it seems to work quite 2451 * well. :) 2452 */ 2453 static void sym_save_initial_setting (hcb_p np) 2454 { 2455 np->sv_scntl0 = INB(nc_scntl0) & 0x0a; 2456 np->sv_scntl3 = INB(nc_scntl3) & 0x07; 2457 np->sv_dmode = INB(nc_dmode) & 0xce; 2458 np->sv_dcntl = INB(nc_dcntl) & 0xa8; 2459 np->sv_ctest3 = INB(nc_ctest3) & 0x01; 2460 np->sv_ctest4 = INB(nc_ctest4) & 0x80; 2461 np->sv_gpcntl = INB(nc_gpcntl); 2462 np->sv_stest1 = INB(nc_stest1); 2463 np->sv_stest2 = INB(nc_stest2) & 0x20; 2464 np->sv_stest4 = INB(nc_stest4); 2465 if (np->features & FE_C10) { /* Always large DMA fifo + ultra3 */ 2466 np->sv_scntl4 = INB(nc_scntl4); 2467 np->sv_ctest5 = INB(nc_ctest5) & 0x04; 2468 } 2469 else 2470 np->sv_ctest5 = INB(nc_ctest5) & 0x24; 2471 } 2472 2473 /* 2474 * Prepare io register values used by sym_init() according 2475 * to selected and supported features. 2476 */ 2477 static int sym_prepare_setting(hcb_p np, struct sym_nvram *nvram) 2478 { 2479 u_char burst_max; 2480 u32 period; 2481 int i; 2482 2483 /* 2484 * Wide ? 2485 */ 2486 np->maxwide = (np->features & FE_WIDE)? 1 : 0; 2487 2488 /* 2489 * Get the frequency of the chip's clock. 2490 */ 2491 if (np->features & FE_QUAD) 2492 np->multiplier = 4; 2493 else if (np->features & FE_DBLR) 2494 np->multiplier = 2; 2495 else 2496 np->multiplier = 1; 2497 2498 np->clock_khz = (np->features & FE_CLK80)? 80000 : 40000; 2499 np->clock_khz *= np->multiplier; 2500 2501 if (np->clock_khz != 40000) 2502 sym_getclock(np, np->multiplier); 2503 2504 /* 2505 * Divisor to be used for async (timer pre-scaler). 2506 */ 2507 i = np->clock_divn - 1; 2508 while (--i >= 0) { 2509 if (10ul * SYM_CONF_MIN_ASYNC * np->clock_khz > div_10M[i]) { 2510 ++i; 2511 break; 2512 } 2513 } 2514 np->rv_scntl3 = i+1; 2515 2516 /* 2517 * The C1010 uses hardwired divisors for async. 2518 * So, we just throw away, the async. divisor.:-) 2519 */ 2520 if (np->features & FE_C10) 2521 np->rv_scntl3 = 0; 2522 2523 /* 2524 * Minimum synchronous period factor supported by the chip. 2525 * Btw, 'period' is in tenths of nanoseconds. 2526 */ 2527 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz; 2528 if (period <= 250) np->minsync = 10; 2529 else if (period <= 303) np->minsync = 11; 2530 else if (period <= 500) np->minsync = 12; 2531 else np->minsync = (period + 40 - 1) / 40; 2532 2533 /* 2534 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). 2535 */ 2536 if (np->minsync < 25 && 2537 !(np->features & (FE_ULTRA|FE_ULTRA2|FE_ULTRA3))) 2538 np->minsync = 25; 2539 else if (np->minsync < 12 && 2540 !(np->features & (FE_ULTRA2|FE_ULTRA3))) 2541 np->minsync = 12; 2542 2543 /* 2544 * Maximum synchronous period factor supported by the chip. 2545 */ 2546 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); 2547 np->maxsync = period > 2540 ? 254 : period / 10; 2548 2549 /* 2550 * If chip is a C1010, guess the sync limits in DT mode. 2551 */ 2552 if ((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) { 2553 if (np->clock_khz == 160000) { 2554 np->minsync_dt = 9; 2555 np->maxsync_dt = 50; 2556 np->maxoffs_dt = 62; 2557 } 2558 } 2559 2560 /* 2561 * 64 bit addressing (895A/896/1010) ? 2562 */ 2563 if (np->features & FE_DAC) 2564 #ifdef __LP64__ 2565 np->rv_ccntl1 |= (XTIMOD | EXTIBMV); 2566 #else 2567 np->rv_ccntl1 |= (DDAC); 2568 #endif 2569 2570 /* 2571 * Phase mismatch handled by SCRIPTS (895A/896/1010) ? 2572 */ 2573 if (np->features & FE_NOPM) 2574 np->rv_ccntl0 |= (ENPMJ); 2575 2576 /* 2577 * C1010 Errata. 2578 * In dual channel mode, contention occurs if internal cycles 2579 * are used. Disable internal cycles. 2580 */ 2581 if (np->device_id == PCI_ID_LSI53C1010 && 2582 np->revision_id < 0x2) 2583 np->rv_ccntl0 |= DILS; 2584 2585 /* 2586 * Select burst length (dwords) 2587 */ 2588 burst_max = SYM_SETUP_BURST_ORDER; 2589 if (burst_max == 255) 2590 burst_max = burst_code(np->sv_dmode, np->sv_ctest4, 2591 np->sv_ctest5); 2592 if (burst_max > 7) 2593 burst_max = 7; 2594 if (burst_max > np->maxburst) 2595 burst_max = np->maxburst; 2596 2597 /* 2598 * DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2. 2599 * This chip and the 860 Rev 1 may wrongly use PCI cache line 2600 * based transactions on LOAD/STORE instructions. So we have 2601 * to prevent these chips from using such PCI transactions in 2602 * this driver. The generic ncr driver that does not use 2603 * LOAD/STORE instructions does not need this work-around. 2604 */ 2605 if ((np->device_id == PCI_ID_SYM53C810 && 2606 np->revision_id >= 0x10 && np->revision_id <= 0x11) || 2607 (np->device_id == PCI_ID_SYM53C860 && 2608 np->revision_id <= 0x1)) 2609 np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP); 2610 2611 /* 2612 * Select all supported special features. 2613 * If we are using on-board RAM for scripts, prefetch (PFEN) 2614 * does not help, but burst op fetch (BOF) does. 2615 * Disabling PFEN makes sure BOF will be used. 2616 */ 2617 if (np->features & FE_ERL) 2618 np->rv_dmode |= ERL; /* Enable Read Line */ 2619 if (np->features & FE_BOF) 2620 np->rv_dmode |= BOF; /* Burst Opcode Fetch */ 2621 if (np->features & FE_ERMP) 2622 np->rv_dmode |= ERMP; /* Enable Read Multiple */ 2623 #if 1 2624 if ((np->features & FE_PFEN) && !np->ram_ba) 2625 #else 2626 if (np->features & FE_PFEN) 2627 #endif 2628 np->rv_dcntl |= PFEN; /* Prefetch Enable */ 2629 if (np->features & FE_CLSE) 2630 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ 2631 if (np->features & FE_WRIE) 2632 np->rv_ctest3 |= WRIE; /* Write and Invalidate */ 2633 if (np->features & FE_DFS) 2634 np->rv_ctest5 |= DFS; /* Dma Fifo Size */ 2635 2636 /* 2637 * Select some other 2638 */ 2639 if (SYM_SETUP_PCI_PARITY) 2640 np->rv_ctest4 |= MPEE; /* Master parity checking */ 2641 if (SYM_SETUP_SCSI_PARITY) 2642 np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */ 2643 2644 /* 2645 * Get parity checking, host ID and verbose mode from NVRAM 2646 */ 2647 np->myaddr = 255; 2648 sym_nvram_setup_host (np, nvram); 2649 #ifdef __sparc64__ 2650 np->myaddr = OF_getscsinitid(np->device); 2651 #endif 2652 2653 /* 2654 * Get SCSI addr of host adapter (set by bios?). 2655 */ 2656 if (np->myaddr == 255) { 2657 np->myaddr = INB(nc_scid) & 0x07; 2658 if (!np->myaddr) 2659 np->myaddr = SYM_SETUP_HOST_ID; 2660 } 2661 2662 /* 2663 * Prepare initial io register bits for burst length 2664 */ 2665 sym_init_burst(np, burst_max); 2666 2667 /* 2668 * Set SCSI BUS mode. 2669 * - LVD capable chips (895/895A/896/1010) report the 2670 * current BUS mode through the STEST4 IO register. 2671 * - For previous generation chips (825/825A/875), 2672 * user has to tell us how to check against HVD, 2673 * since a 100% safe algorithm is not possible. 2674 */ 2675 np->scsi_mode = SMODE_SE; 2676 if (np->features & (FE_ULTRA2|FE_ULTRA3)) 2677 np->scsi_mode = (np->sv_stest4 & SMODE); 2678 else if (np->features & FE_DIFF) { 2679 if (SYM_SETUP_SCSI_DIFF == 1) { 2680 if (np->sv_scntl3) { 2681 if (np->sv_stest2 & 0x20) 2682 np->scsi_mode = SMODE_HVD; 2683 } 2684 else if (nvram->type == SYM_SYMBIOS_NVRAM) { 2685 if (!(INB(nc_gpreg) & 0x08)) 2686 np->scsi_mode = SMODE_HVD; 2687 } 2688 } 2689 else if (SYM_SETUP_SCSI_DIFF == 2) 2690 np->scsi_mode = SMODE_HVD; 2691 } 2692 if (np->scsi_mode == SMODE_HVD) 2693 np->rv_stest2 |= 0x20; 2694 2695 /* 2696 * Set LED support from SCRIPTS. 2697 * Ignore this feature for boards known to use a 2698 * specific GPIO wiring and for the 895A, 896 2699 * and 1010 that drive the LED directly. 2700 */ 2701 if ((SYM_SETUP_SCSI_LED || 2702 (nvram->type == SYM_SYMBIOS_NVRAM || 2703 (nvram->type == SYM_TEKRAM_NVRAM && 2704 np->device_id == PCI_ID_SYM53C895))) && 2705 !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) 2706 np->features |= FE_LED0; 2707 2708 /* 2709 * Set irq mode. 2710 */ 2711 switch(SYM_SETUP_IRQ_MODE & 3) { 2712 case 2: 2713 np->rv_dcntl |= IRQM; 2714 break; 2715 case 1: 2716 np->rv_dcntl |= (np->sv_dcntl & IRQM); 2717 break; 2718 default: 2719 break; 2720 } 2721 2722 /* 2723 * Configure targets according to driver setup. 2724 * If NVRAM present get targets setup from NVRAM. 2725 */ 2726 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 2727 tcb_p tp = &np->target[i]; 2728 2729 tp->tinfo.user.scsi_version = tp->tinfo.current.scsi_version= 2; 2730 tp->tinfo.user.spi_version = tp->tinfo.current.spi_version = 2; 2731 tp->tinfo.user.period = np->minsync; 2732 if (np->features & FE_ULTRA3) 2733 tp->tinfo.user.period = np->minsync_dt; 2734 tp->tinfo.user.offset = np->maxoffs; 2735 tp->tinfo.user.width = np->maxwide ? BUS_16_BIT : BUS_8_BIT; 2736 tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); 2737 tp->usrtags = SYM_SETUP_MAX_TAG; 2738 2739 sym_nvram_setup_target (np, i, nvram); 2740 2741 /* 2742 * For now, guess PPR/DT support from the period 2743 * and BUS width. 2744 */ 2745 if (np->features & FE_ULTRA3) { 2746 if (tp->tinfo.user.period <= 9 && 2747 tp->tinfo.user.width == BUS_16_BIT) { 2748 tp->tinfo.user.options |= PPR_OPT_DT; 2749 tp->tinfo.user.offset = np->maxoffs_dt; 2750 tp->tinfo.user.spi_version = 3; 2751 } 2752 } 2753 2754 if (!tp->usrtags) 2755 tp->usrflags &= ~SYM_TAGS_ENABLED; 2756 } 2757 2758 /* 2759 * Let user know about the settings. 2760 */ 2761 i = nvram->type; 2762 printf("%s: %s NVRAM, ID %d, Fast-%d, %s, %s\n", sym_name(np), 2763 i == SYM_SYMBIOS_NVRAM ? "Symbios" : 2764 (i == SYM_TEKRAM_NVRAM ? "Tekram" : "No"), 2765 np->myaddr, 2766 (np->features & FE_ULTRA3) ? 80 : 2767 (np->features & FE_ULTRA2) ? 40 : 2768 (np->features & FE_ULTRA) ? 20 : 10, 2769 sym_scsi_bus_mode(np->scsi_mode), 2770 (np->rv_scntl0 & 0xa) ? "parity checking" : "NO parity"); 2771 /* 2772 * Tell him more on demand. 2773 */ 2774 if (sym_verbose) { 2775 printf("%s: %s IRQ line driver%s\n", 2776 sym_name(np), 2777 np->rv_dcntl & IRQM ? "totem pole" : "open drain", 2778 np->ram_ba ? ", using on-chip SRAM" : ""); 2779 printf("%s: using %s firmware.\n", sym_name(np), np->fw_name); 2780 if (np->features & FE_NOPM) 2781 printf("%s: handling phase mismatch from SCRIPTS.\n", 2782 sym_name(np)); 2783 } 2784 /* 2785 * And still more. 2786 */ 2787 if (sym_verbose > 1) { 2788 printf ("%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 2789 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 2790 sym_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl, 2791 np->sv_ctest3, np->sv_ctest4, np->sv_ctest5); 2792 2793 printf ("%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 2794 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 2795 sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl, 2796 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 2797 } 2798 /* 2799 * Let user be aware of targets that have some disable flags set. 2800 */ 2801 sym_print_targets_flag(np, SYM_SCAN_BOOT_DISABLED, "SCAN AT BOOT"); 2802 if (sym_verbose) 2803 sym_print_targets_flag(np, SYM_SCAN_LUNS_DISABLED, 2804 "SCAN FOR LUNS"); 2805 2806 return 0; 2807 } 2808 2809 /* 2810 * Prepare the next negotiation message if needed. 2811 * 2812 * Fill in the part of message buffer that contains the 2813 * negotiation and the nego_status field of the CCB. 2814 * Returns the size of the message in bytes. 2815 */ 2816 static int sym_prepare_nego(hcb_p np, ccb_p cp, int nego, u_char *msgptr) 2817 { 2818 tcb_p tp = &np->target[cp->target]; 2819 int msglen = 0; 2820 2821 /* 2822 * Early C1010 chips need a work-around for DT 2823 * data transfer to work. 2824 */ 2825 if (!(np->features & FE_U3EN)) 2826 tp->tinfo.goal.options = 0; 2827 /* 2828 * negotiate using PPR ? 2829 */ 2830 if (tp->tinfo.goal.options & PPR_OPT_MASK) 2831 nego = NS_PPR; 2832 /* 2833 * negotiate wide transfers ? 2834 */ 2835 else if (tp->tinfo.current.width != tp->tinfo.goal.width) 2836 nego = NS_WIDE; 2837 /* 2838 * negotiate synchronous transfers? 2839 */ 2840 else if (tp->tinfo.current.period != tp->tinfo.goal.period || 2841 tp->tinfo.current.offset != tp->tinfo.goal.offset) 2842 nego = NS_SYNC; 2843 2844 switch (nego) { 2845 case NS_SYNC: 2846 msgptr[msglen++] = M_EXTENDED; 2847 msgptr[msglen++] = 3; 2848 msgptr[msglen++] = M_X_SYNC_REQ; 2849 msgptr[msglen++] = tp->tinfo.goal.period; 2850 msgptr[msglen++] = tp->tinfo.goal.offset; 2851 break; 2852 case NS_WIDE: 2853 msgptr[msglen++] = M_EXTENDED; 2854 msgptr[msglen++] = 2; 2855 msgptr[msglen++] = M_X_WIDE_REQ; 2856 msgptr[msglen++] = tp->tinfo.goal.width; 2857 break; 2858 case NS_PPR: 2859 msgptr[msglen++] = M_EXTENDED; 2860 msgptr[msglen++] = 6; 2861 msgptr[msglen++] = M_X_PPR_REQ; 2862 msgptr[msglen++] = tp->tinfo.goal.period; 2863 msgptr[msglen++] = 0; 2864 msgptr[msglen++] = tp->tinfo.goal.offset; 2865 msgptr[msglen++] = tp->tinfo.goal.width; 2866 msgptr[msglen++] = tp->tinfo.goal.options & PPR_OPT_DT; 2867 break; 2868 }; 2869 2870 cp->nego_status = nego; 2871 2872 if (nego) { 2873 tp->nego_cp = cp; /* Keep track a nego will be performed */ 2874 if (DEBUG_FLAGS & DEBUG_NEGO) { 2875 sym_print_msg(cp, nego == NS_SYNC ? "sync msgout" : 2876 nego == NS_WIDE ? "wide msgout" : 2877 "ppr msgout", msgptr); 2878 }; 2879 }; 2880 2881 return msglen; 2882 } 2883 2884 /* 2885 * Insert a job into the start queue. 2886 */ 2887 static void sym_put_start_queue(hcb_p np, ccb_p cp) 2888 { 2889 u_short qidx; 2890 2891 #ifdef SYM_CONF_IARB_SUPPORT 2892 /* 2893 * If the previously queued CCB is not yet done, 2894 * set the IARB hint. The SCRIPTS will go with IARB 2895 * for this job when starting the previous one. 2896 * We leave devices a chance to win arbitration by 2897 * not using more than 'iarb_max' consecutive 2898 * immediate arbitrations. 2899 */ 2900 if (np->last_cp && np->iarb_count < np->iarb_max) { 2901 np->last_cp->host_flags |= HF_HINT_IARB; 2902 ++np->iarb_count; 2903 } 2904 else 2905 np->iarb_count = 0; 2906 np->last_cp = cp; 2907 #endif 2908 2909 /* 2910 * Insert first the idle task and then our job. 2911 * The MB should ensure proper ordering. 2912 */ 2913 qidx = np->squeueput + 2; 2914 if (qidx >= MAX_QUEUE*2) qidx = 0; 2915 2916 np->squeue [qidx] = cpu_to_scr(np->idletask_ba); 2917 MEMORY_BARRIER(); 2918 np->squeue [np->squeueput] = cpu_to_scr(cp->ccb_ba); 2919 2920 np->squeueput = qidx; 2921 2922 if (DEBUG_FLAGS & DEBUG_QUEUE) 2923 printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput); 2924 2925 /* 2926 * Script processor may be waiting for reselect. 2927 * Wake it up. 2928 */ 2929 MEMORY_BARRIER(); 2930 OUTB (nc_istat, SIGP|np->istat_sem); 2931 } 2932 2933 /* 2934 * Soft reset the chip. 2935 * 2936 * Raising SRST when the chip is running may cause 2937 * problems on dual function chips (see below). 2938 * On the other hand, LVD devices need some delay 2939 * to settle and report actual BUS mode in STEST4. 2940 */ 2941 static void sym_chip_reset (hcb_p np) 2942 { 2943 OUTB (nc_istat, SRST); 2944 UDELAY (10); 2945 OUTB (nc_istat, 0); 2946 UDELAY(2000); /* For BUS MODE to settle */ 2947 } 2948 2949 /* 2950 * Soft reset the chip. 2951 * 2952 * Some 896 and 876 chip revisions may hang-up if we set 2953 * the SRST (soft reset) bit at the wrong time when SCRIPTS 2954 * are running. 2955 * So, we need to abort the current operation prior to 2956 * soft resetting the chip. 2957 */ 2958 static void sym_soft_reset (hcb_p np) 2959 { 2960 u_char istat; 2961 int i; 2962 2963 OUTB (nc_istat, CABRT); 2964 for (i = 1000000 ; i ; --i) { 2965 istat = INB (nc_istat); 2966 if (istat & SIP) { 2967 INW (nc_sist); 2968 continue; 2969 } 2970 if (istat & DIP) { 2971 OUTB (nc_istat, 0); 2972 INB (nc_dstat); 2973 break; 2974 } 2975 } 2976 if (!i) 2977 printf("%s: unable to abort current chip operation.\n", 2978 sym_name(np)); 2979 sym_chip_reset (np); 2980 } 2981 2982 /* 2983 * Start reset process. 2984 * 2985 * The interrupt handler will reinitialize the chip. 2986 */ 2987 static void sym_start_reset(hcb_p np) 2988 { 2989 (void) sym_reset_scsi_bus(np, 1); 2990 } 2991 2992 static int sym_reset_scsi_bus(hcb_p np, int enab_int) 2993 { 2994 u32 term; 2995 int retv = 0; 2996 2997 sym_soft_reset(np); /* Soft reset the chip */ 2998 if (enab_int) 2999 OUTW (nc_sien, RST); 3000 /* 3001 * Enable Tolerant, reset IRQD if present and 3002 * properly set IRQ mode, prior to resetting the bus. 3003 */ 3004 OUTB (nc_stest3, TE); 3005 OUTB (nc_dcntl, (np->rv_dcntl & IRQM)); 3006 OUTB (nc_scntl1, CRST); 3007 UDELAY (200); 3008 3009 if (!SYM_SETUP_SCSI_BUS_CHECK) 3010 goto out; 3011 /* 3012 * Check for no terminators or SCSI bus shorts to ground. 3013 * Read SCSI data bus, data parity bits and control signals. 3014 * We are expecting RESET to be TRUE and other signals to be 3015 * FALSE. 3016 */ 3017 term = INB(nc_sstat0); 3018 term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */ 3019 term |= ((INB(nc_sstat2) & 0x01) << 26) | /* sdp1 */ 3020 ((INW(nc_sbdl) & 0xff) << 9) | /* d7-0 */ 3021 ((INW(nc_sbdl) & 0xff00) << 10) | /* d15-8 */ 3022 INB(nc_sbcl); /* req ack bsy sel atn msg cd io */ 3023 3024 if (!(np->features & FE_WIDE)) 3025 term &= 0x3ffff; 3026 3027 if (term != (2<<7)) { 3028 printf("%s: suspicious SCSI data while resetting the BUS.\n", 3029 sym_name(np)); 3030 printf("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = " 3031 "0x%lx, expecting 0x%lx\n", 3032 sym_name(np), 3033 (np->features & FE_WIDE) ? "dp1,d15-8," : "", 3034 (u_long)term, (u_long)(2<<7)); 3035 if (SYM_SETUP_SCSI_BUS_CHECK == 1) 3036 retv = 1; 3037 } 3038 out: 3039 OUTB (nc_scntl1, 0); 3040 /* MDELAY(100); */ 3041 return retv; 3042 } 3043 3044 /* 3045 * The chip may have completed jobs. Look at the DONE QUEUE. 3046 * 3047 * On architectures that may reorder LOAD/STORE operations, 3048 * a memory barrier may be needed after the reading of the 3049 * so-called `flag' and prior to dealing with the data. 3050 */ 3051 static int sym_wakeup_done (hcb_p np) 3052 { 3053 ccb_p cp; 3054 int i, n; 3055 u32 dsa; 3056 3057 SYM_LOCK_ASSERT(MA_OWNED); 3058 3059 n = 0; 3060 i = np->dqueueget; 3061 while (1) { 3062 dsa = scr_to_cpu(np->dqueue[i]); 3063 if (!dsa) 3064 break; 3065 np->dqueue[i] = 0; 3066 if ((i = i+2) >= MAX_QUEUE*2) 3067 i = 0; 3068 3069 cp = sym_ccb_from_dsa(np, dsa); 3070 if (cp) { 3071 MEMORY_BARRIER(); 3072 sym_complete_ok (np, cp); 3073 ++n; 3074 } 3075 else 3076 printf ("%s: bad DSA (%x) in done queue.\n", 3077 sym_name(np), (u_int) dsa); 3078 } 3079 np->dqueueget = i; 3080 3081 return n; 3082 } 3083 3084 /* 3085 * Complete all active CCBs with error. 3086 * Used on CHIP/SCSI RESET. 3087 */ 3088 static void sym_flush_busy_queue (hcb_p np, int cam_status) 3089 { 3090 /* 3091 * Move all active CCBs to the COMP queue 3092 * and flush this queue. 3093 */ 3094 sym_que_splice(&np->busy_ccbq, &np->comp_ccbq); 3095 sym_que_init(&np->busy_ccbq); 3096 sym_flush_comp_queue(np, cam_status); 3097 } 3098 3099 /* 3100 * Start chip. 3101 * 3102 * 'reason' means: 3103 * 0: initialisation. 3104 * 1: SCSI BUS RESET delivered or received. 3105 * 2: SCSI BUS MODE changed. 3106 */ 3107 static void sym_init (hcb_p np, int reason) 3108 { 3109 int i; 3110 u32 phys; 3111 3112 SYM_LOCK_ASSERT(MA_OWNED); 3113 3114 /* 3115 * Reset chip if asked, otherwise just clear fifos. 3116 */ 3117 if (reason == 1) 3118 sym_soft_reset(np); 3119 else { 3120 OUTB (nc_stest3, TE|CSF); 3121 OUTONB (nc_ctest3, CLF); 3122 } 3123 3124 /* 3125 * Clear Start Queue 3126 */ 3127 phys = np->squeue_ba; 3128 for (i = 0; i < MAX_QUEUE*2; i += 2) { 3129 np->squeue[i] = cpu_to_scr(np->idletask_ba); 3130 np->squeue[i+1] = cpu_to_scr(phys + (i+2)*4); 3131 } 3132 np->squeue[MAX_QUEUE*2-1] = cpu_to_scr(phys); 3133 3134 /* 3135 * Start at first entry. 3136 */ 3137 np->squeueput = 0; 3138 3139 /* 3140 * Clear Done Queue 3141 */ 3142 phys = np->dqueue_ba; 3143 for (i = 0; i < MAX_QUEUE*2; i += 2) { 3144 np->dqueue[i] = 0; 3145 np->dqueue[i+1] = cpu_to_scr(phys + (i+2)*4); 3146 } 3147 np->dqueue[MAX_QUEUE*2-1] = cpu_to_scr(phys); 3148 3149 /* 3150 * Start at first entry. 3151 */ 3152 np->dqueueget = 0; 3153 3154 /* 3155 * Install patches in scripts. 3156 * This also let point to first position the start 3157 * and done queue pointers used from SCRIPTS. 3158 */ 3159 np->fw_patch(np); 3160 3161 /* 3162 * Wakeup all pending jobs. 3163 */ 3164 sym_flush_busy_queue(np, CAM_SCSI_BUS_RESET); 3165 3166 /* 3167 * Init chip. 3168 */ 3169 OUTB (nc_istat, 0x00 ); /* Remove Reset, abort */ 3170 UDELAY (2000); /* The 895 needs time for the bus mode to settle */ 3171 3172 OUTB (nc_scntl0, np->rv_scntl0 | 0xc0); 3173 /* full arb., ena parity, par->ATN */ 3174 OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */ 3175 3176 sym_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ 3177 3178 OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */ 3179 OUTW (nc_respid, 1ul<<np->myaddr); /* Id to respond to */ 3180 OUTB (nc_istat , SIGP ); /* Signal Process */ 3181 OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */ 3182 OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */ 3183 3184 OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */ 3185 OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */ 3186 OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */ 3187 3188 /* Extended Sreq/Sack filtering not supported on the C10 */ 3189 if (np->features & FE_C10) 3190 OUTB (nc_stest2, np->rv_stest2); 3191 else 3192 OUTB (nc_stest2, EXT|np->rv_stest2); 3193 3194 OUTB (nc_stest3, TE); /* TolerANT enable */ 3195 OUTB (nc_stime0, 0x0c); /* HTH disabled STO 0.25 sec */ 3196 3197 /* 3198 * For now, disable AIP generation on C1010-66. 3199 */ 3200 if (np->device_id == PCI_ID_LSI53C1010_2) 3201 OUTB (nc_aipcntl1, DISAIP); 3202 3203 /* 3204 * C10101 Errata. 3205 * Errant SGE's when in narrow. Write bits 4 & 5 of 3206 * STEST1 register to disable SGE. We probably should do 3207 * that from SCRIPTS for each selection/reselection, but 3208 * I just don't want. :) 3209 */ 3210 if (np->device_id == PCI_ID_LSI53C1010 && 3211 /* np->revision_id < 0xff */ 1) 3212 OUTB (nc_stest1, INB(nc_stest1) | 0x30); 3213 3214 /* 3215 * DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2. 3216 * Disable overlapped arbitration for some dual function devices, 3217 * regardless revision id (kind of post-chip-design feature. ;-)) 3218 */ 3219 if (np->device_id == PCI_ID_SYM53C875) 3220 OUTB (nc_ctest0, (1<<5)); 3221 else if (np->device_id == PCI_ID_SYM53C896) 3222 np->rv_ccntl0 |= DPR; 3223 3224 /* 3225 * Write CCNTL0/CCNTL1 for chips capable of 64 bit addressing 3226 * and/or hardware phase mismatch, since only such chips 3227 * seem to support those IO registers. 3228 */ 3229 if (np->features & (FE_DAC|FE_NOPM)) { 3230 OUTB (nc_ccntl0, np->rv_ccntl0); 3231 OUTB (nc_ccntl1, np->rv_ccntl1); 3232 } 3233 3234 /* 3235 * If phase mismatch handled by scripts (895A/896/1010), 3236 * set PM jump addresses. 3237 */ 3238 if (np->features & FE_NOPM) { 3239 OUTL (nc_pmjad1, SCRIPTB_BA (np, pm_handle)); 3240 OUTL (nc_pmjad2, SCRIPTB_BA (np, pm_handle)); 3241 } 3242 3243 /* 3244 * Enable GPIO0 pin for writing if LED support from SCRIPTS. 3245 * Also set GPIO5 and clear GPIO6 if hardware LED control. 3246 */ 3247 if (np->features & FE_LED0) 3248 OUTB(nc_gpcntl, INB(nc_gpcntl) & ~0x01); 3249 else if (np->features & FE_LEDC) 3250 OUTB(nc_gpcntl, (INB(nc_gpcntl) & ~0x41) | 0x20); 3251 3252 /* 3253 * enable ints 3254 */ 3255 OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR); 3256 OUTB (nc_dien , MDPE|BF|SSI|SIR|IID); 3257 3258 /* 3259 * For 895/6 enable SBMC interrupt and save current SCSI bus mode. 3260 * Try to eat the spurious SBMC interrupt that may occur when 3261 * we reset the chip but not the SCSI BUS (at initialization). 3262 */ 3263 if (np->features & (FE_ULTRA2|FE_ULTRA3)) { 3264 OUTONW (nc_sien, SBMC); 3265 if (reason == 0) { 3266 MDELAY(100); 3267 INW (nc_sist); 3268 } 3269 np->scsi_mode = INB (nc_stest4) & SMODE; 3270 } 3271 3272 /* 3273 * Fill in target structure. 3274 * Reinitialize usrsync. 3275 * Reinitialize usrwide. 3276 * Prepare sync negotiation according to actual SCSI bus mode. 3277 */ 3278 for (i=0;i<SYM_CONF_MAX_TARGET;i++) { 3279 tcb_p tp = &np->target[i]; 3280 3281 tp->to_reset = 0; 3282 tp->head.sval = 0; 3283 tp->head.wval = np->rv_scntl3; 3284 tp->head.uval = 0; 3285 3286 tp->tinfo.current.period = 0; 3287 tp->tinfo.current.offset = 0; 3288 tp->tinfo.current.width = BUS_8_BIT; 3289 tp->tinfo.current.options = 0; 3290 } 3291 3292 /* 3293 * Download SCSI SCRIPTS to on-chip RAM if present, 3294 * and start script processor. 3295 */ 3296 if (np->ram_ba) { 3297 if (sym_verbose > 1) 3298 printf ("%s: Downloading SCSI SCRIPTS.\n", 3299 sym_name(np)); 3300 if (np->ram_ws == 8192) { 3301 OUTRAM_OFF(4096, np->scriptb0, np->scriptb_sz); 3302 OUTL (nc_mmws, np->scr_ram_seg); 3303 OUTL (nc_mmrs, np->scr_ram_seg); 3304 OUTL (nc_sfs, np->scr_ram_seg); 3305 phys = SCRIPTB_BA (np, start64); 3306 } 3307 else 3308 phys = SCRIPTA_BA (np, init); 3309 OUTRAM_OFF(0, np->scripta0, np->scripta_sz); 3310 } 3311 else 3312 phys = SCRIPTA_BA (np, init); 3313 3314 np->istat_sem = 0; 3315 3316 OUTL (nc_dsa, np->hcb_ba); 3317 OUTL_DSP (phys); 3318 3319 /* 3320 * Notify the XPT about the RESET condition. 3321 */ 3322 if (reason != 0) 3323 xpt_async(AC_BUS_RESET, np->path, NULL); 3324 } 3325 3326 /* 3327 * Get clock factor and sync divisor for a given 3328 * synchronous factor period. 3329 */ 3330 static int 3331 sym_getsync(hcb_p np, u_char dt, u_char sfac, u_char *divp, u_char *fakp) 3332 { 3333 u32 clk = np->clock_khz; /* SCSI clock frequency in kHz */ 3334 int div = np->clock_divn; /* Number of divisors supported */ 3335 u32 fak; /* Sync factor in sxfer */ 3336 u32 per; /* Period in tenths of ns */ 3337 u32 kpc; /* (per * clk) */ 3338 int ret; 3339 3340 /* 3341 * Compute the synchronous period in tenths of nano-seconds 3342 */ 3343 if (dt && sfac <= 9) per = 125; 3344 else if (sfac <= 10) per = 250; 3345 else if (sfac == 11) per = 303; 3346 else if (sfac == 12) per = 500; 3347 else per = 40 * sfac; 3348 ret = per; 3349 3350 kpc = per * clk; 3351 if (dt) 3352 kpc <<= 1; 3353 3354 /* 3355 * For earliest C10 revision 0, we cannot use extra 3356 * clocks for the setting of the SCSI clocking. 3357 * Note that this limits the lowest sync data transfer 3358 * to 5 Mega-transfers per second and may result in 3359 * using higher clock divisors. 3360 */ 3361 #if 1 3362 if ((np->features & (FE_C10|FE_U3EN)) == FE_C10) { 3363 /* 3364 * Look for the lowest clock divisor that allows an 3365 * output speed not faster than the period. 3366 */ 3367 while (div > 0) { 3368 --div; 3369 if (kpc > (div_10M[div] << 2)) { 3370 ++div; 3371 break; 3372 } 3373 } 3374 fak = 0; /* No extra clocks */ 3375 if (div == np->clock_divn) { /* Are we too fast ? */ 3376 ret = -1; 3377 } 3378 *divp = div; 3379 *fakp = fak; 3380 return ret; 3381 } 3382 #endif 3383 3384 /* 3385 * Look for the greatest clock divisor that allows an 3386 * input speed faster than the period. 3387 */ 3388 while (div-- > 0) 3389 if (kpc >= (div_10M[div] << 2)) break; 3390 3391 /* 3392 * Calculate the lowest clock factor that allows an output 3393 * speed not faster than the period, and the max output speed. 3394 * If fak >= 1 we will set both XCLKH_ST and XCLKH_DT. 3395 * If fak >= 2 we will also set XCLKS_ST and XCLKS_DT. 3396 */ 3397 if (dt) { 3398 fak = (kpc - 1) / (div_10M[div] << 1) + 1 - 2; 3399 /* ret = ((2+fak)*div_10M[div])/np->clock_khz; */ 3400 } 3401 else { 3402 fak = (kpc - 1) / div_10M[div] + 1 - 4; 3403 /* ret = ((4+fak)*div_10M[div])/np->clock_khz; */ 3404 } 3405 3406 /* 3407 * Check against our hardware limits, or bugs :). 3408 */ 3409 if (fak > 2) {fak = 2; ret = -1;} 3410 3411 /* 3412 * Compute and return sync parameters. 3413 */ 3414 *divp = div; 3415 *fakp = fak; 3416 3417 return ret; 3418 } 3419 3420 /* 3421 * Tell the SCSI layer about the new transfer parameters. 3422 */ 3423 static void 3424 sym_xpt_async_transfer_neg(hcb_p np, int target, u_int spi_valid) 3425 { 3426 struct ccb_trans_settings cts; 3427 struct cam_path *path; 3428 int sts; 3429 tcb_p tp = &np->target[target]; 3430 3431 sts = xpt_create_path(&path, NULL, cam_sim_path(np->sim), target, 3432 CAM_LUN_WILDCARD); 3433 if (sts != CAM_REQ_CMP) 3434 return; 3435 3436 bzero(&cts, sizeof(cts)); 3437 3438 #define cts__scsi (cts.proto_specific.scsi) 3439 #define cts__spi (cts.xport_specific.spi) 3440 3441 cts.type = CTS_TYPE_CURRENT_SETTINGS; 3442 cts.protocol = PROTO_SCSI; 3443 cts.transport = XPORT_SPI; 3444 cts.protocol_version = tp->tinfo.current.scsi_version; 3445 cts.transport_version = tp->tinfo.current.spi_version; 3446 3447 cts__spi.valid = spi_valid; 3448 if (spi_valid & CTS_SPI_VALID_SYNC_RATE) 3449 cts__spi.sync_period = tp->tinfo.current.period; 3450 if (spi_valid & CTS_SPI_VALID_SYNC_OFFSET) 3451 cts__spi.sync_offset = tp->tinfo.current.offset; 3452 if (spi_valid & CTS_SPI_VALID_BUS_WIDTH) 3453 cts__spi.bus_width = tp->tinfo.current.width; 3454 if (spi_valid & CTS_SPI_VALID_PPR_OPTIONS) 3455 cts__spi.ppr_options = tp->tinfo.current.options; 3456 #undef cts__spi 3457 #undef cts__scsi 3458 xpt_setup_ccb(&cts.ccb_h, path, /*priority*/1); 3459 xpt_async(AC_TRANSFER_NEG, path, &cts); 3460 xpt_free_path(path); 3461 } 3462 3463 #define SYM_SPI_VALID_WDTR \ 3464 CTS_SPI_VALID_BUS_WIDTH | \ 3465 CTS_SPI_VALID_SYNC_RATE | \ 3466 CTS_SPI_VALID_SYNC_OFFSET 3467 #define SYM_SPI_VALID_SDTR \ 3468 CTS_SPI_VALID_SYNC_RATE | \ 3469 CTS_SPI_VALID_SYNC_OFFSET 3470 #define SYM_SPI_VALID_PPR \ 3471 CTS_SPI_VALID_PPR_OPTIONS | \ 3472 CTS_SPI_VALID_BUS_WIDTH | \ 3473 CTS_SPI_VALID_SYNC_RATE | \ 3474 CTS_SPI_VALID_SYNC_OFFSET 3475 3476 /* 3477 * We received a WDTR. 3478 * Let everything be aware of the changes. 3479 */ 3480 static void sym_setwide(hcb_p np, ccb_p cp, u_char wide) 3481 { 3482 tcb_p tp = &np->target[cp->target]; 3483 3484 sym_settrans(np, cp, 0, 0, 0, wide, 0, 0); 3485 3486 /* 3487 * Tell the SCSI layer about the new transfer parameters. 3488 */ 3489 tp->tinfo.goal.width = tp->tinfo.current.width = wide; 3490 tp->tinfo.current.offset = 0; 3491 tp->tinfo.current.period = 0; 3492 tp->tinfo.current.options = 0; 3493 3494 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_WDTR); 3495 } 3496 3497 /* 3498 * We received a SDTR. 3499 * Let everything be aware of the changes. 3500 */ 3501 static void 3502 sym_setsync(hcb_p np, ccb_p cp, u_char ofs, u_char per, u_char div, u_char fak) 3503 { 3504 tcb_p tp = &np->target[cp->target]; 3505 u_char wide = (cp->phys.select.sel_scntl3 & EWS) ? 1 : 0; 3506 3507 sym_settrans(np, cp, 0, ofs, per, wide, div, fak); 3508 3509 /* 3510 * Tell the SCSI layer about the new transfer parameters. 3511 */ 3512 tp->tinfo.goal.period = tp->tinfo.current.period = per; 3513 tp->tinfo.goal.offset = tp->tinfo.current.offset = ofs; 3514 tp->tinfo.goal.options = tp->tinfo.current.options = 0; 3515 3516 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_SDTR); 3517 } 3518 3519 /* 3520 * We received a PPR. 3521 * Let everything be aware of the changes. 3522 */ 3523 static void sym_setpprot(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 3524 u_char per, u_char wide, u_char div, u_char fak) 3525 { 3526 tcb_p tp = &np->target[cp->target]; 3527 3528 sym_settrans(np, cp, dt, ofs, per, wide, div, fak); 3529 3530 /* 3531 * Tell the SCSI layer about the new transfer parameters. 3532 */ 3533 tp->tinfo.goal.width = tp->tinfo.current.width = wide; 3534 tp->tinfo.goal.period = tp->tinfo.current.period = per; 3535 tp->tinfo.goal.offset = tp->tinfo.current.offset = ofs; 3536 tp->tinfo.goal.options = tp->tinfo.current.options = dt; 3537 3538 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_PPR); 3539 } 3540 3541 /* 3542 * Switch trans mode for current job and it's target. 3543 */ 3544 static void sym_settrans(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 3545 u_char per, u_char wide, u_char div, u_char fak) 3546 { 3547 SYM_QUEHEAD *qp; 3548 union ccb *ccb; 3549 tcb_p tp; 3550 u_char target = INB (nc_sdid) & 0x0f; 3551 u_char sval, wval, uval; 3552 3553 assert (cp); 3554 if (!cp) return; 3555 ccb = cp->cam_ccb; 3556 assert (ccb); 3557 if (!ccb) return; 3558 assert (target == (cp->target & 0xf)); 3559 tp = &np->target[target]; 3560 3561 sval = tp->head.sval; 3562 wval = tp->head.wval; 3563 uval = tp->head.uval; 3564 3565 #if 0 3566 printf("XXXX sval=%x wval=%x uval=%x (%x)\n", 3567 sval, wval, uval, np->rv_scntl3); 3568 #endif 3569 /* 3570 * Set the offset. 3571 */ 3572 if (!(np->features & FE_C10)) 3573 sval = (sval & ~0x1f) | ofs; 3574 else 3575 sval = (sval & ~0x3f) | ofs; 3576 3577 /* 3578 * Set the sync divisor and extra clock factor. 3579 */ 3580 if (ofs != 0) { 3581 wval = (wval & ~0x70) | ((div+1) << 4); 3582 if (!(np->features & FE_C10)) 3583 sval = (sval & ~0xe0) | (fak << 5); 3584 else { 3585 uval = uval & ~(XCLKH_ST|XCLKH_DT|XCLKS_ST|XCLKS_DT); 3586 if (fak >= 1) uval |= (XCLKH_ST|XCLKH_DT); 3587 if (fak >= 2) uval |= (XCLKS_ST|XCLKS_DT); 3588 } 3589 } 3590 3591 /* 3592 * Set the bus width. 3593 */ 3594 wval = wval & ~EWS; 3595 if (wide != 0) 3596 wval |= EWS; 3597 3598 /* 3599 * Set misc. ultra enable bits. 3600 */ 3601 if (np->features & FE_C10) { 3602 uval = uval & ~(U3EN|AIPCKEN); 3603 if (dt) { 3604 assert(np->features & FE_U3EN); 3605 uval |= U3EN; 3606 } 3607 } 3608 else { 3609 wval = wval & ~ULTRA; 3610 if (per <= 12) wval |= ULTRA; 3611 } 3612 3613 /* 3614 * Stop there if sync parameters are unchanged. 3615 */ 3616 if (tp->head.sval == sval && 3617 tp->head.wval == wval && 3618 tp->head.uval == uval) 3619 return; 3620 tp->head.sval = sval; 3621 tp->head.wval = wval; 3622 tp->head.uval = uval; 3623 3624 /* 3625 * Disable extended Sreq/Sack filtering if per < 50. 3626 * Not supported on the C1010. 3627 */ 3628 if (per < 50 && !(np->features & FE_C10)) 3629 OUTOFFB (nc_stest2, EXT); 3630 3631 /* 3632 * set actual value and sync_status 3633 */ 3634 OUTB (nc_sxfer, tp->head.sval); 3635 OUTB (nc_scntl3, tp->head.wval); 3636 3637 if (np->features & FE_C10) { 3638 OUTB (nc_scntl4, tp->head.uval); 3639 } 3640 3641 /* 3642 * patch ALL busy ccbs of this target. 3643 */ 3644 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 3645 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 3646 if (cp->target != target) 3647 continue; 3648 cp->phys.select.sel_scntl3 = tp->head.wval; 3649 cp->phys.select.sel_sxfer = tp->head.sval; 3650 if (np->features & FE_C10) { 3651 cp->phys.select.sel_scntl4 = tp->head.uval; 3652 } 3653 } 3654 } 3655 3656 /* 3657 * log message for real hard errors 3658 * 3659 * sym0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc). 3660 * reg: r0 r1 r2 r3 r4 r5 r6 ..... rf. 3661 * 3662 * exception register: 3663 * ds: dstat 3664 * si: sist 3665 * 3666 * SCSI bus lines: 3667 * so: control lines as driven by chip. 3668 * si: control lines as seen by chip. 3669 * sd: scsi data lines as seen by chip. 3670 * 3671 * wide/fastmode: 3672 * sxfer: (see the manual) 3673 * scntl3: (see the manual) 3674 * 3675 * current script command: 3676 * dsp: script address (relative to start of script). 3677 * dbc: first word of script command. 3678 * 3679 * First 24 register of the chip: 3680 * r0..rf 3681 */ 3682 static void sym_log_hard_error(hcb_p np, u_short sist, u_char dstat) 3683 { 3684 u32 dsp; 3685 int script_ofs; 3686 int script_size; 3687 char *script_name; 3688 u_char *script_base; 3689 int i; 3690 3691 dsp = INL (nc_dsp); 3692 3693 if (dsp > np->scripta_ba && 3694 dsp <= np->scripta_ba + np->scripta_sz) { 3695 script_ofs = dsp - np->scripta_ba; 3696 script_size = np->scripta_sz; 3697 script_base = (u_char *) np->scripta0; 3698 script_name = "scripta"; 3699 } 3700 else if (np->scriptb_ba < dsp && 3701 dsp <= np->scriptb_ba + np->scriptb_sz) { 3702 script_ofs = dsp - np->scriptb_ba; 3703 script_size = np->scriptb_sz; 3704 script_base = (u_char *) np->scriptb0; 3705 script_name = "scriptb"; 3706 } else { 3707 script_ofs = dsp; 3708 script_size = 0; 3709 script_base = 0; 3710 script_name = "mem"; 3711 } 3712 3713 printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", 3714 sym_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, 3715 (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), 3716 (unsigned)INB (nc_sbdl), (unsigned)INB (nc_sxfer), 3717 (unsigned)INB (nc_scntl3), script_name, script_ofs, 3718 (unsigned)INL (nc_dbc)); 3719 3720 if (((script_ofs & 3) == 0) && 3721 (unsigned)script_ofs < script_size) { 3722 printf ("%s: script cmd = %08x\n", sym_name(np), 3723 scr_to_cpu((int) *(u32 *)(script_base + script_ofs))); 3724 } 3725 3726 printf ("%s: regdump:", sym_name(np)); 3727 for (i=0; i<24;i++) 3728 printf (" %02x", (unsigned)INB_OFF(i)); 3729 printf (".\n"); 3730 3731 /* 3732 * PCI BUS error, read the PCI ststus register. 3733 */ 3734 if (dstat & (MDPE|BF)) { 3735 u_short pci_sts; 3736 pci_sts = pci_read_config(np->device, PCIR_STATUS, 2); 3737 if (pci_sts & 0xf900) { 3738 pci_write_config(np->device, PCIR_STATUS, pci_sts, 2); 3739 printf("%s: PCI STATUS = 0x%04x\n", 3740 sym_name(np), pci_sts & 0xf900); 3741 } 3742 } 3743 } 3744 3745 /* 3746 * chip interrupt handler 3747 * 3748 * In normal situations, interrupt conditions occur one at 3749 * a time. But when something bad happens on the SCSI BUS, 3750 * the chip may raise several interrupt flags before 3751 * stopping and interrupting the CPU. The additionnal 3752 * interrupt flags are stacked in some extra registers 3753 * after the SIP and/or DIP flag has been raised in the 3754 * ISTAT. After the CPU has read the interrupt condition 3755 * flag from SIST or DSTAT, the chip unstacks the other 3756 * interrupt flags and sets the corresponding bits in 3757 * SIST or DSTAT. Since the chip starts stacking once the 3758 * SIP or DIP flag is set, there is a small window of time 3759 * where the stacking does not occur. 3760 * 3761 * Typically, multiple interrupt conditions may happen in 3762 * the following situations: 3763 * 3764 * - SCSI parity error + Phase mismatch (PAR|MA) 3765 * When a parity error is detected in input phase 3766 * and the device switches to msg-in phase inside a 3767 * block MOV. 3768 * - SCSI parity error + Unexpected disconnect (PAR|UDC) 3769 * When a stupid device does not want to handle the 3770 * recovery of an SCSI parity error. 3771 * - Some combinations of STO, PAR, UDC, ... 3772 * When using non compliant SCSI stuff, when user is 3773 * doing non compliant hot tampering on the BUS, when 3774 * something really bad happens to a device, etc ... 3775 * 3776 * The heuristic suggested by SYMBIOS to handle 3777 * multiple interrupts is to try unstacking all 3778 * interrupts conditions and to handle them on some 3779 * priority based on error severity. 3780 * This will work when the unstacking has been 3781 * successful, but we cannot be 100 % sure of that, 3782 * since the CPU may have been faster to unstack than 3783 * the chip is able to stack. Hmmm ... But it seems that 3784 * such a situation is very unlikely to happen. 3785 * 3786 * If this happen, for example STO caught by the CPU 3787 * then UDC happenning before the CPU have restarted 3788 * the SCRIPTS, the driver may wrongly complete the 3789 * same command on UDC, since the SCRIPTS didn't restart 3790 * and the DSA still points to the same command. 3791 * We avoid this situation by setting the DSA to an 3792 * invalid value when the CCB is completed and before 3793 * restarting the SCRIPTS. 3794 * 3795 * Another issue is that we need some section of our 3796 * recovery procedures to be somehow uninterruptible but 3797 * the SCRIPTS processor does not provides such a 3798 * feature. For this reason, we handle recovery preferently 3799 * from the C code and check against some SCRIPTS critical 3800 * sections from the C code. 3801 * 3802 * Hopefully, the interrupt handling of the driver is now 3803 * able to resist to weird BUS error conditions, but donnot 3804 * ask me for any guarantee that it will never fail. :-) 3805 * Use at your own decision and risk. 3806 */ 3807 static void sym_intr1 (hcb_p np) 3808 { 3809 u_char istat, istatc; 3810 u_char dstat; 3811 u_short sist; 3812 3813 SYM_LOCK_ASSERT(MA_OWNED); 3814 3815 /* 3816 * interrupt on the fly ? 3817 * 3818 * A `dummy read' is needed to ensure that the 3819 * clear of the INTF flag reaches the device 3820 * before the scanning of the DONE queue. 3821 */ 3822 istat = INB (nc_istat); 3823 if (istat & INTF) { 3824 OUTB (nc_istat, (istat & SIGP) | INTF | np->istat_sem); 3825 istat = INB (nc_istat); /* DUMMY READ */ 3826 if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); 3827 (void)sym_wakeup_done (np); 3828 }; 3829 3830 if (!(istat & (SIP|DIP))) 3831 return; 3832 3833 #if 0 /* We should never get this one */ 3834 if (istat & CABRT) 3835 OUTB (nc_istat, CABRT); 3836 #endif 3837 3838 /* 3839 * PAR and MA interrupts may occur at the same time, 3840 * and we need to know of both in order to handle 3841 * this situation properly. We try to unstack SCSI 3842 * interrupts for that reason. BTW, I dislike a LOT 3843 * such a loop inside the interrupt routine. 3844 * Even if DMA interrupt stacking is very unlikely to 3845 * happen, we also try unstacking these ones, since 3846 * this has no performance impact. 3847 */ 3848 sist = 0; 3849 dstat = 0; 3850 istatc = istat; 3851 do { 3852 if (istatc & SIP) 3853 sist |= INW (nc_sist); 3854 if (istatc & DIP) 3855 dstat |= INB (nc_dstat); 3856 istatc = INB (nc_istat); 3857 istat |= istatc; 3858 } while (istatc & (SIP|DIP)); 3859 3860 if (DEBUG_FLAGS & DEBUG_TINY) 3861 printf ("<%d|%x:%x|%x:%x>", 3862 (int)INB(nc_scr0), 3863 dstat,sist, 3864 (unsigned)INL(nc_dsp), 3865 (unsigned)INL(nc_dbc)); 3866 /* 3867 * On paper, a memory barrier may be needed here. 3868 * And since we are paranoid ... :) 3869 */ 3870 MEMORY_BARRIER(); 3871 3872 /* 3873 * First, interrupts we want to service cleanly. 3874 * 3875 * Phase mismatch (MA) is the most frequent interrupt 3876 * for chip earlier than the 896 and so we have to service 3877 * it as quickly as possible. 3878 * A SCSI parity error (PAR) may be combined with a phase 3879 * mismatch condition (MA). 3880 * Programmed interrupts (SIR) are used to call the C code 3881 * from SCRIPTS. 3882 * The single step interrupt (SSI) is not used in this 3883 * driver. 3884 */ 3885 if (!(sist & (STO|GEN|HTH|SGE|UDC|SBMC|RST)) && 3886 !(dstat & (MDPE|BF|ABRT|IID))) { 3887 if (sist & PAR) sym_int_par (np, sist); 3888 else if (sist & MA) sym_int_ma (np); 3889 else if (dstat & SIR) sym_int_sir (np); 3890 else if (dstat & SSI) OUTONB_STD (); 3891 else goto unknown_int; 3892 return; 3893 }; 3894 3895 /* 3896 * Now, interrupts that donnot happen in normal 3897 * situations and that we may need to recover from. 3898 * 3899 * On SCSI RESET (RST), we reset everything. 3900 * On SCSI BUS MODE CHANGE (SBMC), we complete all 3901 * active CCBs with RESET status, prepare all devices 3902 * for negotiating again and restart the SCRIPTS. 3903 * On STO and UDC, we complete the CCB with the corres- 3904 * ponding status and restart the SCRIPTS. 3905 */ 3906 if (sist & RST) { 3907 xpt_print_path(np->path); 3908 printf("SCSI BUS reset detected.\n"); 3909 sym_init (np, 1); 3910 return; 3911 }; 3912 3913 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 3914 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 3915 3916 if (!(sist & (GEN|HTH|SGE)) && 3917 !(dstat & (MDPE|BF|ABRT|IID))) { 3918 if (sist & SBMC) sym_int_sbmc (np); 3919 else if (sist & STO) sym_int_sto (np); 3920 else if (sist & UDC) sym_int_udc (np); 3921 else goto unknown_int; 3922 return; 3923 }; 3924 3925 /* 3926 * Now, interrupts we are not able to recover cleanly. 3927 * 3928 * Log message for hard errors. 3929 * Reset everything. 3930 */ 3931 3932 sym_log_hard_error(np, sist, dstat); 3933 3934 if ((sist & (GEN|HTH|SGE)) || 3935 (dstat & (MDPE|BF|ABRT|IID))) { 3936 sym_start_reset(np); 3937 return; 3938 }; 3939 3940 unknown_int: 3941 /* 3942 * We just miss the cause of the interrupt. :( 3943 * Print a message. The timeout will do the real work. 3944 */ 3945 printf( "%s: unknown interrupt(s) ignored, " 3946 "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n", 3947 sym_name(np), istat, dstat, sist); 3948 } 3949 3950 static void sym_intr(void *arg) 3951 { 3952 hcb_p np = arg; 3953 3954 SYM_LOCK(); 3955 3956 if (DEBUG_FLAGS & DEBUG_TINY) printf ("["); 3957 sym_intr1((hcb_p) arg); 3958 if (DEBUG_FLAGS & DEBUG_TINY) printf ("]"); 3959 3960 SYM_UNLOCK(); 3961 } 3962 3963 static void sym_poll(struct cam_sim *sim) 3964 { 3965 sym_intr1(cam_sim_softc(sim)); 3966 } 3967 3968 /* 3969 * generic recovery from scsi interrupt 3970 * 3971 * The doc says that when the chip gets an SCSI interrupt, 3972 * it tries to stop in an orderly fashion, by completing 3973 * an instruction fetch that had started or by flushing 3974 * the DMA fifo for a write to memory that was executing. 3975 * Such a fashion is not enough to know if the instruction 3976 * that was just before the current DSP value has been 3977 * executed or not. 3978 * 3979 * There are some small SCRIPTS sections that deal with 3980 * the start queue and the done queue that may break any 3981 * assomption from the C code if we are interrupted 3982 * inside, so we reset if this happens. Btw, since these 3983 * SCRIPTS sections are executed while the SCRIPTS hasn't 3984 * started SCSI operations, it is very unlikely to happen. 3985 * 3986 * All the driver data structures are supposed to be 3987 * allocated from the same 4 GB memory window, so there 3988 * is a 1 to 1 relationship between DSA and driver data 3989 * structures. Since we are careful :) to invalidate the 3990 * DSA when we complete a command or when the SCRIPTS 3991 * pushes a DSA into a queue, we can trust it when it 3992 * points to a CCB. 3993 */ 3994 static void sym_recover_scsi_int (hcb_p np, u_char hsts) 3995 { 3996 u32 dsp = INL (nc_dsp); 3997 u32 dsa = INL (nc_dsa); 3998 ccb_p cp = sym_ccb_from_dsa(np, dsa); 3999 4000 /* 4001 * If we haven't been interrupted inside the SCRIPTS 4002 * critical pathes, we can safely restart the SCRIPTS 4003 * and trust the DSA value if it matches a CCB. 4004 */ 4005 if ((!(dsp > SCRIPTA_BA (np, getjob_begin) && 4006 dsp < SCRIPTA_BA (np, getjob_end) + 1)) && 4007 (!(dsp > SCRIPTA_BA (np, ungetjob) && 4008 dsp < SCRIPTA_BA (np, reselect) + 1)) && 4009 (!(dsp > SCRIPTB_BA (np, sel_for_abort) && 4010 dsp < SCRIPTB_BA (np, sel_for_abort_1) + 1)) && 4011 (!(dsp > SCRIPTA_BA (np, done) && 4012 dsp < SCRIPTA_BA (np, done_end) + 1))) { 4013 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 4014 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 4015 /* 4016 * If we have a CCB, let the SCRIPTS call us back for 4017 * the handling of the error with SCRATCHA filled with 4018 * STARTPOS. This way, we will be able to freeze the 4019 * device queue and requeue awaiting IOs. 4020 */ 4021 if (cp) { 4022 cp->host_status = hsts; 4023 OUTL_DSP (SCRIPTA_BA (np, complete_error)); 4024 } 4025 /* 4026 * Otherwise just restart the SCRIPTS. 4027 */ 4028 else { 4029 OUTL (nc_dsa, 0xffffff); 4030 OUTL_DSP (SCRIPTA_BA (np, start)); 4031 } 4032 } 4033 else 4034 goto reset_all; 4035 4036 return; 4037 4038 reset_all: 4039 sym_start_reset(np); 4040 } 4041 4042 /* 4043 * chip exception handler for selection timeout 4044 */ 4045 static void sym_int_sto (hcb_p np) 4046 { 4047 u32 dsp = INL (nc_dsp); 4048 4049 if (DEBUG_FLAGS & DEBUG_TINY) printf ("T"); 4050 4051 if (dsp == SCRIPTA_BA (np, wf_sel_done) + 8) 4052 sym_recover_scsi_int(np, HS_SEL_TIMEOUT); 4053 else 4054 sym_start_reset(np); 4055 } 4056 4057 /* 4058 * chip exception handler for unexpected disconnect 4059 */ 4060 static void sym_int_udc (hcb_p np) 4061 { 4062 printf ("%s: unexpected disconnect\n", sym_name(np)); 4063 sym_recover_scsi_int(np, HS_UNEXPECTED); 4064 } 4065 4066 /* 4067 * chip exception handler for SCSI bus mode change 4068 * 4069 * spi2-r12 11.2.3 says a transceiver mode change must 4070 * generate a reset event and a device that detects a reset 4071 * event shall initiate a hard reset. It says also that a 4072 * device that detects a mode change shall set data transfer 4073 * mode to eight bit asynchronous, etc... 4074 * So, just reinitializing all except chip should be enough. 4075 */ 4076 static void sym_int_sbmc (hcb_p np) 4077 { 4078 u_char scsi_mode = INB (nc_stest4) & SMODE; 4079 4080 /* 4081 * Notify user. 4082 */ 4083 xpt_print_path(np->path); 4084 printf("SCSI BUS mode change from %s to %s.\n", 4085 sym_scsi_bus_mode(np->scsi_mode), sym_scsi_bus_mode(scsi_mode)); 4086 4087 /* 4088 * Should suspend command processing for a few seconds and 4089 * reinitialize all except the chip. 4090 */ 4091 sym_init (np, 2); 4092 } 4093 4094 /* 4095 * chip exception handler for SCSI parity error. 4096 * 4097 * When the chip detects a SCSI parity error and is 4098 * currently executing a (CH)MOV instruction, it does 4099 * not interrupt immediately, but tries to finish the 4100 * transfer of the current scatter entry before 4101 * interrupting. The following situations may occur: 4102 * 4103 * - The complete scatter entry has been transferred 4104 * without the device having changed phase. 4105 * The chip will then interrupt with the DSP pointing 4106 * to the instruction that follows the MOV. 4107 * 4108 * - A phase mismatch occurs before the MOV finished 4109 * and phase errors are to be handled by the C code. 4110 * The chip will then interrupt with both PAR and MA 4111 * conditions set. 4112 * 4113 * - A phase mismatch occurs before the MOV finished and 4114 * phase errors are to be handled by SCRIPTS. 4115 * The chip will load the DSP with the phase mismatch 4116 * JUMP address and interrupt the host processor. 4117 */ 4118 static void sym_int_par (hcb_p np, u_short sist) 4119 { 4120 u_char hsts = INB (HS_PRT); 4121 u32 dsp = INL (nc_dsp); 4122 u32 dbc = INL (nc_dbc); 4123 u32 dsa = INL (nc_dsa); 4124 u_char sbcl = INB (nc_sbcl); 4125 u_char cmd = dbc >> 24; 4126 int phase = cmd & 7; 4127 ccb_p cp = sym_ccb_from_dsa(np, dsa); 4128 4129 printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n", 4130 sym_name(np), hsts, dbc, sbcl); 4131 4132 /* 4133 * Check that the chip is connected to the SCSI BUS. 4134 */ 4135 if (!(INB (nc_scntl1) & ISCON)) { 4136 sym_recover_scsi_int(np, HS_UNEXPECTED); 4137 return; 4138 } 4139 4140 /* 4141 * If the nexus is not clearly identified, reset the bus. 4142 * We will try to do better later. 4143 */ 4144 if (!cp) 4145 goto reset_all; 4146 4147 /* 4148 * Check instruction was a MOV, direction was INPUT and 4149 * ATN is asserted. 4150 */ 4151 if ((cmd & 0xc0) || !(phase & 1) || !(sbcl & 0x8)) 4152 goto reset_all; 4153 4154 /* 4155 * Keep track of the parity error. 4156 */ 4157 OUTONB (HF_PRT, HF_EXT_ERR); 4158 cp->xerr_status |= XE_PARITY_ERR; 4159 4160 /* 4161 * Prepare the message to send to the device. 4162 */ 4163 np->msgout[0] = (phase == 7) ? M_PARITY : M_ID_ERROR; 4164 4165 /* 4166 * If the old phase was DATA IN phase, we have to deal with 4167 * the 3 situations described above. 4168 * For other input phases (MSG IN and STATUS), the device 4169 * must resend the whole thing that failed parity checking 4170 * or signal error. So, jumping to dispatcher should be OK. 4171 */ 4172 if (phase == 1 || phase == 5) { 4173 /* Phase mismatch handled by SCRIPTS */ 4174 if (dsp == SCRIPTB_BA (np, pm_handle)) 4175 OUTL_DSP (dsp); 4176 /* Phase mismatch handled by the C code */ 4177 else if (sist & MA) 4178 sym_int_ma (np); 4179 /* No phase mismatch occurred */ 4180 else { 4181 OUTL (nc_temp, dsp); 4182 OUTL_DSP (SCRIPTA_BA (np, dispatch)); 4183 } 4184 } 4185 else 4186 OUTL_DSP (SCRIPTA_BA (np, clrack)); 4187 return; 4188 4189 reset_all: 4190 sym_start_reset(np); 4191 } 4192 4193 /* 4194 * chip exception handler for phase errors. 4195 * 4196 * We have to construct a new transfer descriptor, 4197 * to transfer the rest of the current block. 4198 */ 4199 static void sym_int_ma (hcb_p np) 4200 { 4201 u32 dbc; 4202 u32 rest; 4203 u32 dsp; 4204 u32 dsa; 4205 u32 nxtdsp; 4206 u32 *vdsp; 4207 u32 oadr, olen; 4208 u32 *tblp; 4209 u32 newcmd; 4210 u_int delta; 4211 u_char cmd; 4212 u_char hflags, hflags0; 4213 struct sym_pmc *pm; 4214 ccb_p cp; 4215 4216 dsp = INL (nc_dsp); 4217 dbc = INL (nc_dbc); 4218 dsa = INL (nc_dsa); 4219 4220 cmd = dbc >> 24; 4221 rest = dbc & 0xffffff; 4222 delta = 0; 4223 4224 /* 4225 * locate matching cp if any. 4226 */ 4227 cp = sym_ccb_from_dsa(np, dsa); 4228 4229 /* 4230 * Donnot take into account dma fifo and various buffers in 4231 * INPUT phase since the chip flushes everything before 4232 * raising the MA interrupt for interrupted INPUT phases. 4233 * For DATA IN phase, we will check for the SWIDE later. 4234 */ 4235 if ((cmd & 7) != 1 && (cmd & 7) != 5) { 4236 u_char ss0, ss2; 4237 4238 if (np->features & FE_DFBC) 4239 delta = INW (nc_dfbc); 4240 else { 4241 u32 dfifo; 4242 4243 /* 4244 * Read DFIFO, CTEST[4-6] using 1 PCI bus ownership. 4245 */ 4246 dfifo = INL(nc_dfifo); 4247 4248 /* 4249 * Calculate remaining bytes in DMA fifo. 4250 * (CTEST5 = dfifo >> 16) 4251 */ 4252 if (dfifo & (DFS << 16)) 4253 delta = ((((dfifo >> 8) & 0x300) | 4254 (dfifo & 0xff)) - rest) & 0x3ff; 4255 else 4256 delta = ((dfifo & 0xff) - rest) & 0x7f; 4257 } 4258 4259 /* 4260 * The data in the dma fifo has not been transferred to 4261 * the target -> add the amount to the rest 4262 * and clear the data. 4263 * Check the sstat2 register in case of wide transfer. 4264 */ 4265 rest += delta; 4266 ss0 = INB (nc_sstat0); 4267 if (ss0 & OLF) rest++; 4268 if (!(np->features & FE_C10)) 4269 if (ss0 & ORF) rest++; 4270 if (cp && (cp->phys.select.sel_scntl3 & EWS)) { 4271 ss2 = INB (nc_sstat2); 4272 if (ss2 & OLF1) rest++; 4273 if (!(np->features & FE_C10)) 4274 if (ss2 & ORF1) rest++; 4275 }; 4276 4277 /* 4278 * Clear fifos. 4279 */ 4280 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* dma fifo */ 4281 OUTB (nc_stest3, TE|CSF); /* scsi fifo */ 4282 } 4283 4284 /* 4285 * log the information 4286 */ 4287 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) 4288 printf ("P%x%x RL=%d D=%d ", cmd&7, INB(nc_sbcl)&7, 4289 (unsigned) rest, (unsigned) delta); 4290 4291 /* 4292 * try to find the interrupted script command, 4293 * and the address at which to continue. 4294 */ 4295 vdsp = 0; 4296 nxtdsp = 0; 4297 if (dsp > np->scripta_ba && 4298 dsp <= np->scripta_ba + np->scripta_sz) { 4299 vdsp = (u32 *)((char*)np->scripta0 + (dsp-np->scripta_ba-8)); 4300 nxtdsp = dsp; 4301 } 4302 else if (dsp > np->scriptb_ba && 4303 dsp <= np->scriptb_ba + np->scriptb_sz) { 4304 vdsp = (u32 *)((char*)np->scriptb0 + (dsp-np->scriptb_ba-8)); 4305 nxtdsp = dsp; 4306 } 4307 4308 /* 4309 * log the information 4310 */ 4311 if (DEBUG_FLAGS & DEBUG_PHASE) { 4312 printf ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", 4313 cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd); 4314 }; 4315 4316 if (!vdsp) { 4317 printf ("%s: interrupted SCRIPT address not found.\n", 4318 sym_name (np)); 4319 goto reset_all; 4320 } 4321 4322 if (!cp) { 4323 printf ("%s: SCSI phase error fixup: CCB already dequeued.\n", 4324 sym_name (np)); 4325 goto reset_all; 4326 } 4327 4328 /* 4329 * get old startaddress and old length. 4330 */ 4331 oadr = scr_to_cpu(vdsp[1]); 4332 4333 if (cmd & 0x10) { /* Table indirect */ 4334 tblp = (u32 *) ((char*) &cp->phys + oadr); 4335 olen = scr_to_cpu(tblp[0]); 4336 oadr = scr_to_cpu(tblp[1]); 4337 } else { 4338 tblp = (u32 *) 0; 4339 olen = scr_to_cpu(vdsp[0]) & 0xffffff; 4340 }; 4341 4342 if (DEBUG_FLAGS & DEBUG_PHASE) { 4343 printf ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n", 4344 (unsigned) (scr_to_cpu(vdsp[0]) >> 24), 4345 tblp, 4346 (unsigned) olen, 4347 (unsigned) oadr); 4348 }; 4349 4350 /* 4351 * check cmd against assumed interrupted script command. 4352 * If dt data phase, the MOVE instruction hasn't bit 4 of 4353 * the phase. 4354 */ 4355 if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0]) >> 24)) { 4356 PRINT_ADDR(cp); 4357 printf ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n", 4358 (unsigned)cmd, (unsigned)scr_to_cpu(vdsp[0]) >> 24); 4359 4360 goto reset_all; 4361 }; 4362 4363 /* 4364 * if old phase not dataphase, leave here. 4365 */ 4366 if (cmd & 2) { 4367 PRINT_ADDR(cp); 4368 printf ("phase change %x-%x %d@%08x resid=%d.\n", 4369 cmd&7, INB(nc_sbcl)&7, (unsigned)olen, 4370 (unsigned)oadr, (unsigned)rest); 4371 goto unexpected_phase; 4372 }; 4373 4374 /* 4375 * Choose the correct PM save area. 4376 * 4377 * Look at the PM_SAVE SCRIPT if you want to understand 4378 * this stuff. The equivalent code is implemented in 4379 * SCRIPTS for the 895A, 896 and 1010 that are able to 4380 * handle PM from the SCRIPTS processor. 4381 */ 4382 hflags0 = INB (HF_PRT); 4383 hflags = hflags0; 4384 4385 if (hflags & (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED)) { 4386 if (hflags & HF_IN_PM0) 4387 nxtdsp = scr_to_cpu(cp->phys.pm0.ret); 4388 else if (hflags & HF_IN_PM1) 4389 nxtdsp = scr_to_cpu(cp->phys.pm1.ret); 4390 4391 if (hflags & HF_DP_SAVED) 4392 hflags ^= HF_ACT_PM; 4393 } 4394 4395 if (!(hflags & HF_ACT_PM)) { 4396 pm = &cp->phys.pm0; 4397 newcmd = SCRIPTA_BA (np, pm0_data); 4398 } 4399 else { 4400 pm = &cp->phys.pm1; 4401 newcmd = SCRIPTA_BA (np, pm1_data); 4402 } 4403 4404 hflags &= ~(HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED); 4405 if (hflags != hflags0) 4406 OUTB (HF_PRT, hflags); 4407 4408 /* 4409 * fillin the phase mismatch context 4410 */ 4411 pm->sg.addr = cpu_to_scr(oadr + olen - rest); 4412 pm->sg.size = cpu_to_scr(rest); 4413 pm->ret = cpu_to_scr(nxtdsp); 4414 4415 /* 4416 * If we have a SWIDE, 4417 * - prepare the address to write the SWIDE from SCRIPTS, 4418 * - compute the SCRIPTS address to restart from, 4419 * - move current data pointer context by one byte. 4420 */ 4421 nxtdsp = SCRIPTA_BA (np, dispatch); 4422 if ((cmd & 7) == 1 && cp && (cp->phys.select.sel_scntl3 & EWS) && 4423 (INB (nc_scntl2) & WSR)) { 4424 u32 tmp; 4425 4426 /* 4427 * Set up the table indirect for the MOVE 4428 * of the residual byte and adjust the data 4429 * pointer context. 4430 */ 4431 tmp = scr_to_cpu(pm->sg.addr); 4432 cp->phys.wresid.addr = cpu_to_scr(tmp); 4433 pm->sg.addr = cpu_to_scr(tmp + 1); 4434 tmp = scr_to_cpu(pm->sg.size); 4435 cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) | 1); 4436 pm->sg.size = cpu_to_scr(tmp - 1); 4437 4438 /* 4439 * If only the residual byte is to be moved, 4440 * no PM context is needed. 4441 */ 4442 if ((tmp&0xffffff) == 1) 4443 newcmd = pm->ret; 4444 4445 /* 4446 * Prepare the address of SCRIPTS that will 4447 * move the residual byte to memory. 4448 */ 4449 nxtdsp = SCRIPTB_BA (np, wsr_ma_helper); 4450 } 4451 4452 if (DEBUG_FLAGS & DEBUG_PHASE) { 4453 PRINT_ADDR(cp); 4454 printf ("PM %x %x %x / %x %x %x.\n", 4455 hflags0, hflags, newcmd, 4456 (unsigned)scr_to_cpu(pm->sg.addr), 4457 (unsigned)scr_to_cpu(pm->sg.size), 4458 (unsigned)scr_to_cpu(pm->ret)); 4459 } 4460 4461 /* 4462 * Restart the SCRIPTS processor. 4463 */ 4464 OUTL (nc_temp, newcmd); 4465 OUTL_DSP (nxtdsp); 4466 return; 4467 4468 /* 4469 * Unexpected phase changes that occurs when the current phase 4470 * is not a DATA IN or DATA OUT phase are due to error conditions. 4471 * Such event may only happen when the SCRIPTS is using a 4472 * multibyte SCSI MOVE. 4473 * 4474 * Phase change Some possible cause 4475 * 4476 * COMMAND --> MSG IN SCSI parity error detected by target. 4477 * COMMAND --> STATUS Bad command or refused by target. 4478 * MSG OUT --> MSG IN Message rejected by target. 4479 * MSG OUT --> COMMAND Bogus target that discards extended 4480 * negotiation messages. 4481 * 4482 * The code below does not care of the new phase and so 4483 * trusts the target. Why to annoy it ? 4484 * If the interrupted phase is COMMAND phase, we restart at 4485 * dispatcher. 4486 * If a target does not get all the messages after selection, 4487 * the code assumes blindly that the target discards extended 4488 * messages and clears the negotiation status. 4489 * If the target does not want all our response to negotiation, 4490 * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 4491 * bloat for such a should_not_happen situation). 4492 * In all other situation, we reset the BUS. 4493 * Are these assumptions reasonnable ? (Wait and see ...) 4494 */ 4495 unexpected_phase: 4496 dsp -= 8; 4497 nxtdsp = 0; 4498 4499 switch (cmd & 7) { 4500 case 2: /* COMMAND phase */ 4501 nxtdsp = SCRIPTA_BA (np, dispatch); 4502 break; 4503 #if 0 4504 case 3: /* STATUS phase */ 4505 nxtdsp = SCRIPTA_BA (np, dispatch); 4506 break; 4507 #endif 4508 case 6: /* MSG OUT phase */ 4509 /* 4510 * If the device may want to use untagged when we want 4511 * tagged, we prepare an IDENTIFY without disc. granted, 4512 * since we will not be able to handle reselect. 4513 * Otherwise, we just don't care. 4514 */ 4515 if (dsp == SCRIPTA_BA (np, send_ident)) { 4516 if (cp->tag != NO_TAG && olen - rest <= 3) { 4517 cp->host_status = HS_BUSY; 4518 np->msgout[0] = M_IDENTIFY | cp->lun; 4519 nxtdsp = SCRIPTB_BA (np, ident_break_atn); 4520 } 4521 else 4522 nxtdsp = SCRIPTB_BA (np, ident_break); 4523 } 4524 else if (dsp == SCRIPTB_BA (np, send_wdtr) || 4525 dsp == SCRIPTB_BA (np, send_sdtr) || 4526 dsp == SCRIPTB_BA (np, send_ppr)) { 4527 nxtdsp = SCRIPTB_BA (np, nego_bad_phase); 4528 } 4529 break; 4530 #if 0 4531 case 7: /* MSG IN phase */ 4532 nxtdsp = SCRIPTA_BA (np, clrack); 4533 break; 4534 #endif 4535 } 4536 4537 if (nxtdsp) { 4538 OUTL_DSP (nxtdsp); 4539 return; 4540 } 4541 4542 reset_all: 4543 sym_start_reset(np); 4544 } 4545 4546 /* 4547 * Dequeue from the START queue all CCBs that match 4548 * a given target/lun/task condition (-1 means all), 4549 * and move them from the BUSY queue to the COMP queue 4550 * with CAM_REQUEUE_REQ status condition. 4551 * This function is used during error handling/recovery. 4552 * It is called with SCRIPTS not running. 4553 */ 4554 static int 4555 sym_dequeue_from_squeue(hcb_p np, int i, int target, int lun, int task) 4556 { 4557 int j; 4558 ccb_p cp; 4559 4560 /* 4561 * Make sure the starting index is within range. 4562 */ 4563 assert((i >= 0) && (i < 2*MAX_QUEUE)); 4564 4565 /* 4566 * Walk until end of START queue and dequeue every job 4567 * that matches the target/lun/task condition. 4568 */ 4569 j = i; 4570 while (i != np->squeueput) { 4571 cp = sym_ccb_from_dsa(np, scr_to_cpu(np->squeue[i])); 4572 assert(cp); 4573 #ifdef SYM_CONF_IARB_SUPPORT 4574 /* Forget hints for IARB, they may be no longer relevant */ 4575 cp->host_flags &= ~HF_HINT_IARB; 4576 #endif 4577 if ((target == -1 || cp->target == target) && 4578 (lun == -1 || cp->lun == lun) && 4579 (task == -1 || cp->tag == task)) { 4580 sym_set_cam_status(cp->cam_ccb, CAM_REQUEUE_REQ); 4581 sym_remque(&cp->link_ccbq); 4582 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); 4583 } 4584 else { 4585 if (i != j) 4586 np->squeue[j] = np->squeue[i]; 4587 if ((j += 2) >= MAX_QUEUE*2) j = 0; 4588 } 4589 if ((i += 2) >= MAX_QUEUE*2) i = 0; 4590 } 4591 if (i != j) /* Copy back the idle task if needed */ 4592 np->squeue[j] = np->squeue[i]; 4593 np->squeueput = j; /* Update our current start queue pointer */ 4594 4595 return (i - j) / 2; 4596 } 4597 4598 /* 4599 * Complete all CCBs queued to the COMP queue. 4600 * 4601 * These CCBs are assumed: 4602 * - Not to be referenced either by devices or 4603 * SCRIPTS-related queues and datas. 4604 * - To have to be completed with an error condition 4605 * or requeued. 4606 * 4607 * The device queue freeze count is incremented 4608 * for each CCB that does not prevent this. 4609 * This function is called when all CCBs involved 4610 * in error handling/recovery have been reaped. 4611 */ 4612 static void 4613 sym_flush_comp_queue(hcb_p np, int cam_status) 4614 { 4615 SYM_QUEHEAD *qp; 4616 ccb_p cp; 4617 4618 while ((qp = sym_remque_head(&np->comp_ccbq)) != NULL) { 4619 union ccb *ccb; 4620 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4621 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 4622 /* Leave quiet CCBs waiting for resources */ 4623 if (cp->host_status == HS_WAIT) 4624 continue; 4625 ccb = cp->cam_ccb; 4626 if (cam_status) 4627 sym_set_cam_status(ccb, cam_status); 4628 sym_freeze_cam_ccb(ccb); 4629 sym_xpt_done(np, ccb, cp); 4630 sym_free_ccb(np, cp); 4631 } 4632 } 4633 4634 /* 4635 * chip handler for bad SCSI status condition 4636 * 4637 * In case of bad SCSI status, we unqueue all the tasks 4638 * currently queued to the controller but not yet started 4639 * and then restart the SCRIPTS processor immediately. 4640 * 4641 * QUEUE FULL and BUSY conditions are handled the same way. 4642 * Basically all the not yet started tasks are requeued in 4643 * device queue and the queue is frozen until a completion. 4644 * 4645 * For CHECK CONDITION and COMMAND TERMINATED status, we use 4646 * the CCB of the failed command to prepare a REQUEST SENSE 4647 * SCSI command and queue it to the controller queue. 4648 * 4649 * SCRATCHA is assumed to have been loaded with STARTPOS 4650 * before the SCRIPTS called the C code. 4651 */ 4652 static void sym_sir_bad_scsi_status(hcb_p np, ccb_p cp) 4653 { 4654 tcb_p tp = &np->target[cp->target]; 4655 u32 startp; 4656 u_char s_status = cp->ssss_status; 4657 u_char h_flags = cp->host_flags; 4658 int msglen; 4659 int nego; 4660 int i; 4661 4662 SYM_LOCK_ASSERT(MA_OWNED); 4663 4664 /* 4665 * Compute the index of the next job to start from SCRIPTS. 4666 */ 4667 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 4668 4669 /* 4670 * The last CCB queued used for IARB hint may be 4671 * no longer relevant. Forget it. 4672 */ 4673 #ifdef SYM_CONF_IARB_SUPPORT 4674 if (np->last_cp) 4675 np->last_cp = NULL; 4676 #endif 4677 4678 /* 4679 * Now deal with the SCSI status. 4680 */ 4681 switch(s_status) { 4682 case S_BUSY: 4683 case S_QUEUE_FULL: 4684 if (sym_verbose >= 2) { 4685 PRINT_ADDR(cp); 4686 printf (s_status == S_BUSY ? "BUSY" : "QUEUE FULL\n"); 4687 } 4688 default: /* S_INT, S_INT_COND_MET, S_CONFLICT */ 4689 sym_complete_error (np, cp); 4690 break; 4691 case S_TERMINATED: 4692 case S_CHECK_COND: 4693 /* 4694 * If we get an SCSI error when requesting sense, give up. 4695 */ 4696 if (h_flags & HF_SENSE) { 4697 sym_complete_error (np, cp); 4698 break; 4699 } 4700 4701 /* 4702 * Dequeue all queued CCBs for that device not yet started, 4703 * and restart the SCRIPTS processor immediately. 4704 */ 4705 (void) sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 4706 OUTL_DSP (SCRIPTA_BA (np, start)); 4707 4708 /* 4709 * Save some info of the actual IO. 4710 * Compute the data residual. 4711 */ 4712 cp->sv_scsi_status = cp->ssss_status; 4713 cp->sv_xerr_status = cp->xerr_status; 4714 cp->sv_resid = sym_compute_residual(np, cp); 4715 4716 /* 4717 * Prepare all needed data structures for 4718 * requesting sense data. 4719 */ 4720 4721 /* 4722 * identify message 4723 */ 4724 cp->scsi_smsg2[0] = M_IDENTIFY | cp->lun; 4725 msglen = 1; 4726 4727 /* 4728 * If we are currently using anything different from 4729 * async. 8 bit data transfers with that target, 4730 * start a negotiation, since the device may want 4731 * to report us a UNIT ATTENTION condition due to 4732 * a cause we currently ignore, and we donnot want 4733 * to be stuck with WIDE and/or SYNC data transfer. 4734 * 4735 * cp->nego_status is filled by sym_prepare_nego(). 4736 */ 4737 cp->nego_status = 0; 4738 nego = 0; 4739 if (tp->tinfo.current.options & PPR_OPT_MASK) 4740 nego = NS_PPR; 4741 else if (tp->tinfo.current.width != BUS_8_BIT) 4742 nego = NS_WIDE; 4743 else if (tp->tinfo.current.offset != 0) 4744 nego = NS_SYNC; 4745 if (nego) 4746 msglen += 4747 sym_prepare_nego (np,cp, nego, &cp->scsi_smsg2[msglen]); 4748 /* 4749 * Message table indirect structure. 4750 */ 4751 cp->phys.smsg.addr = cpu_to_scr(CCB_BA (cp, scsi_smsg2)); 4752 cp->phys.smsg.size = cpu_to_scr(msglen); 4753 4754 /* 4755 * sense command 4756 */ 4757 cp->phys.cmd.addr = cpu_to_scr(CCB_BA (cp, sensecmd)); 4758 cp->phys.cmd.size = cpu_to_scr(6); 4759 4760 /* 4761 * patch requested size into sense command 4762 */ 4763 cp->sensecmd[0] = 0x03; 4764 cp->sensecmd[1] = cp->lun << 5; 4765 if (tp->tinfo.current.scsi_version > 2 || cp->lun > 7) 4766 cp->sensecmd[1] = 0; 4767 cp->sensecmd[4] = SYM_SNS_BBUF_LEN; 4768 cp->data_len = SYM_SNS_BBUF_LEN; 4769 4770 /* 4771 * sense data 4772 */ 4773 bzero(cp->sns_bbuf, SYM_SNS_BBUF_LEN); 4774 cp->phys.sense.addr = cpu_to_scr(vtobus(cp->sns_bbuf)); 4775 cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN); 4776 4777 /* 4778 * requeue the command. 4779 */ 4780 startp = SCRIPTB_BA (np, sdata_in); 4781 4782 cp->phys.head.savep = cpu_to_scr(startp); 4783 cp->phys.head.goalp = cpu_to_scr(startp + 16); 4784 cp->phys.head.lastp = cpu_to_scr(startp); 4785 cp->startp = cpu_to_scr(startp); 4786 4787 cp->actualquirks = SYM_QUIRK_AUTOSAVE; 4788 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 4789 cp->ssss_status = S_ILLEGAL; 4790 cp->host_flags = (HF_SENSE|HF_DATA_IN); 4791 cp->xerr_status = 0; 4792 cp->extra_bytes = 0; 4793 4794 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, select)); 4795 4796 /* 4797 * Requeue the command. 4798 */ 4799 sym_put_start_queue(np, cp); 4800 4801 /* 4802 * Give back to upper layer everything we have dequeued. 4803 */ 4804 sym_flush_comp_queue(np, 0); 4805 break; 4806 } 4807 } 4808 4809 /* 4810 * After a device has accepted some management message 4811 * as BUS DEVICE RESET, ABORT TASK, etc ..., or when 4812 * a device signals a UNIT ATTENTION condition, some 4813 * tasks are thrown away by the device. We are required 4814 * to reflect that on our tasks list since the device 4815 * will never complete these tasks. 4816 * 4817 * This function move from the BUSY queue to the COMP 4818 * queue all disconnected CCBs for a given target that 4819 * match the following criteria: 4820 * - lun=-1 means any logical UNIT otherwise a given one. 4821 * - task=-1 means any task, otherwise a given one. 4822 */ 4823 static int 4824 sym_clear_tasks(hcb_p np, int cam_status, int target, int lun, int task) 4825 { 4826 SYM_QUEHEAD qtmp, *qp; 4827 int i = 0; 4828 ccb_p cp; 4829 4830 /* 4831 * Move the entire BUSY queue to our temporary queue. 4832 */ 4833 sym_que_init(&qtmp); 4834 sym_que_splice(&np->busy_ccbq, &qtmp); 4835 sym_que_init(&np->busy_ccbq); 4836 4837 /* 4838 * Put all CCBs that matches our criteria into 4839 * the COMP queue and put back other ones into 4840 * the BUSY queue. 4841 */ 4842 while ((qp = sym_remque_head(&qtmp)) != NULL) { 4843 union ccb *ccb; 4844 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4845 ccb = cp->cam_ccb; 4846 if (cp->host_status != HS_DISCONNECT || 4847 cp->target != target || 4848 (lun != -1 && cp->lun != lun) || 4849 (task != -1 && 4850 (cp->tag != NO_TAG && cp->scsi_smsg[2] != task))) { 4851 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 4852 continue; 4853 } 4854 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); 4855 4856 /* Preserve the software timeout condition */ 4857 if (sym_get_cam_status(ccb) != CAM_CMD_TIMEOUT) 4858 sym_set_cam_status(ccb, cam_status); 4859 ++i; 4860 #if 0 4861 printf("XXXX TASK @%p CLEARED\n", cp); 4862 #endif 4863 } 4864 return i; 4865 } 4866 4867 /* 4868 * chip handler for TASKS recovery 4869 * 4870 * We cannot safely abort a command, while the SCRIPTS 4871 * processor is running, since we just would be in race 4872 * with it. 4873 * 4874 * As long as we have tasks to abort, we keep the SEM 4875 * bit set in the ISTAT. When this bit is set, the 4876 * SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED) 4877 * each time it enters the scheduler. 4878 * 4879 * If we have to reset a target, clear tasks of a unit, 4880 * or to perform the abort of a disconnected job, we 4881 * restart the SCRIPTS for selecting the target. Once 4882 * selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED). 4883 * If it loses arbitration, the SCRIPTS will interrupt again 4884 * the next time it will enter its scheduler, and so on ... 4885 * 4886 * On SIR_TARGET_SELECTED, we scan for the more 4887 * appropriate thing to do: 4888 * 4889 * - If nothing, we just sent a M_ABORT message to the 4890 * target to get rid of the useless SCSI bus ownership. 4891 * According to the specs, no tasks shall be affected. 4892 * - If the target is to be reset, we send it a M_RESET 4893 * message. 4894 * - If a logical UNIT is to be cleared , we send the 4895 * IDENTIFY(lun) + M_ABORT. 4896 * - If an untagged task is to be aborted, we send the 4897 * IDENTIFY(lun) + M_ABORT. 4898 * - If a tagged task is to be aborted, we send the 4899 * IDENTIFY(lun) + task attributes + M_ABORT_TAG. 4900 * 4901 * Once our 'kiss of death' :) message has been accepted 4902 * by the target, the SCRIPTS interrupts again 4903 * (SIR_ABORT_SENT). On this interrupt, we complete 4904 * all the CCBs that should have been aborted by the 4905 * target according to our message. 4906 */ 4907 static void sym_sir_task_recovery(hcb_p np, int num) 4908 { 4909 SYM_QUEHEAD *qp; 4910 ccb_p cp; 4911 tcb_p tp; 4912 int target=-1, lun=-1, task; 4913 int i, k; 4914 4915 switch(num) { 4916 /* 4917 * The SCRIPTS processor stopped before starting 4918 * the next command in order to allow us to perform 4919 * some task recovery. 4920 */ 4921 case SIR_SCRIPT_STOPPED: 4922 /* 4923 * Do we have any target to reset or unit to clear ? 4924 */ 4925 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 4926 tp = &np->target[i]; 4927 if (tp->to_reset || 4928 (tp->lun0p && tp->lun0p->to_clear)) { 4929 target = i; 4930 break; 4931 } 4932 if (!tp->lunmp) 4933 continue; 4934 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) { 4935 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) { 4936 target = i; 4937 break; 4938 } 4939 } 4940 if (target != -1) 4941 break; 4942 } 4943 4944 /* 4945 * If not, walk the busy queue for any 4946 * disconnected CCB to be aborted. 4947 */ 4948 if (target == -1) { 4949 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 4950 cp = sym_que_entry(qp,struct sym_ccb,link_ccbq); 4951 if (cp->host_status != HS_DISCONNECT) 4952 continue; 4953 if (cp->to_abort) { 4954 target = cp->target; 4955 break; 4956 } 4957 } 4958 } 4959 4960 /* 4961 * If some target is to be selected, 4962 * prepare and start the selection. 4963 */ 4964 if (target != -1) { 4965 tp = &np->target[target]; 4966 np->abrt_sel.sel_id = target; 4967 np->abrt_sel.sel_scntl3 = tp->head.wval; 4968 np->abrt_sel.sel_sxfer = tp->head.sval; 4969 OUTL(nc_dsa, np->hcb_ba); 4970 OUTL_DSP (SCRIPTB_BA (np, sel_for_abort)); 4971 return; 4972 } 4973 4974 /* 4975 * Now look for a CCB to abort that haven't started yet. 4976 * Btw, the SCRIPTS processor is still stopped, so 4977 * we are not in race. 4978 */ 4979 i = 0; 4980 cp = NULL; 4981 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 4982 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4983 if (cp->host_status != HS_BUSY && 4984 cp->host_status != HS_NEGOTIATE) 4985 continue; 4986 if (!cp->to_abort) 4987 continue; 4988 #ifdef SYM_CONF_IARB_SUPPORT 4989 /* 4990 * If we are using IMMEDIATE ARBITRATION, we donnot 4991 * want to cancel the last queued CCB, since the 4992 * SCRIPTS may have anticipated the selection. 4993 */ 4994 if (cp == np->last_cp) { 4995 cp->to_abort = 0; 4996 continue; 4997 } 4998 #endif 4999 i = 1; /* Means we have found some */ 5000 break; 5001 } 5002 if (!i) { 5003 /* 5004 * We are done, so we donnot need 5005 * to synchronize with the SCRIPTS anylonger. 5006 * Remove the SEM flag from the ISTAT. 5007 */ 5008 np->istat_sem = 0; 5009 OUTB (nc_istat, SIGP); 5010 break; 5011 } 5012 /* 5013 * Compute index of next position in the start 5014 * queue the SCRIPTS intends to start and dequeue 5015 * all CCBs for that device that haven't been started. 5016 */ 5017 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 5018 i = sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 5019 5020 /* 5021 * Make sure at least our IO to abort has been dequeued. 5022 */ 5023 assert(i && sym_get_cam_status(cp->cam_ccb) == CAM_REQUEUE_REQ); 5024 5025 /* 5026 * Keep track in cam status of the reason of the abort. 5027 */ 5028 if (cp->to_abort == 2) 5029 sym_set_cam_status(cp->cam_ccb, CAM_CMD_TIMEOUT); 5030 else 5031 sym_set_cam_status(cp->cam_ccb, CAM_REQ_ABORTED); 5032 5033 /* 5034 * Complete with error everything that we have dequeued. 5035 */ 5036 sym_flush_comp_queue(np, 0); 5037 break; 5038 /* 5039 * The SCRIPTS processor has selected a target 5040 * we may have some manual recovery to perform for. 5041 */ 5042 case SIR_TARGET_SELECTED: 5043 target = (INB (nc_sdid) & 0xf); 5044 tp = &np->target[target]; 5045 5046 np->abrt_tbl.addr = cpu_to_scr(vtobus(np->abrt_msg)); 5047 5048 /* 5049 * If the target is to be reset, prepare a 5050 * M_RESET message and clear the to_reset flag 5051 * since we donnot expect this operation to fail. 5052 */ 5053 if (tp->to_reset) { 5054 np->abrt_msg[0] = M_RESET; 5055 np->abrt_tbl.size = 1; 5056 tp->to_reset = 0; 5057 break; 5058 } 5059 5060 /* 5061 * Otherwise, look for some logical unit to be cleared. 5062 */ 5063 if (tp->lun0p && tp->lun0p->to_clear) 5064 lun = 0; 5065 else if (tp->lunmp) { 5066 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) { 5067 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) { 5068 lun = k; 5069 break; 5070 } 5071 } 5072 } 5073 5074 /* 5075 * If a logical unit is to be cleared, prepare 5076 * an IDENTIFY(lun) + ABORT MESSAGE. 5077 */ 5078 if (lun != -1) { 5079 lcb_p lp = sym_lp(tp, lun); 5080 lp->to_clear = 0; /* We donnot expect to fail here */ 5081 np->abrt_msg[0] = M_IDENTIFY | lun; 5082 np->abrt_msg[1] = M_ABORT; 5083 np->abrt_tbl.size = 2; 5084 break; 5085 } 5086 5087 /* 5088 * Otherwise, look for some disconnected job to 5089 * abort for this target. 5090 */ 5091 i = 0; 5092 cp = NULL; 5093 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 5094 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 5095 if (cp->host_status != HS_DISCONNECT) 5096 continue; 5097 if (cp->target != target) 5098 continue; 5099 if (!cp->to_abort) 5100 continue; 5101 i = 1; /* Means we have some */ 5102 break; 5103 } 5104 5105 /* 5106 * If we have none, probably since the device has 5107 * completed the command before we won abitration, 5108 * send a M_ABORT message without IDENTIFY. 5109 * According to the specs, the device must just 5110 * disconnect the BUS and not abort any task. 5111 */ 5112 if (!i) { 5113 np->abrt_msg[0] = M_ABORT; 5114 np->abrt_tbl.size = 1; 5115 break; 5116 } 5117 5118 /* 5119 * We have some task to abort. 5120 * Set the IDENTIFY(lun) 5121 */ 5122 np->abrt_msg[0] = M_IDENTIFY | cp->lun; 5123 5124 /* 5125 * If we want to abort an untagged command, we 5126 * will send an IDENTIFY + M_ABORT. 5127 * Otherwise (tagged command), we will send 5128 * an IDENTIFY + task attributes + ABORT TAG. 5129 */ 5130 if (cp->tag == NO_TAG) { 5131 np->abrt_msg[1] = M_ABORT; 5132 np->abrt_tbl.size = 2; 5133 } 5134 else { 5135 np->abrt_msg[1] = cp->scsi_smsg[1]; 5136 np->abrt_msg[2] = cp->scsi_smsg[2]; 5137 np->abrt_msg[3] = M_ABORT_TAG; 5138 np->abrt_tbl.size = 4; 5139 } 5140 /* 5141 * Keep track of software timeout condition, since the 5142 * peripheral driver may not count retries on abort 5143 * conditions not due to timeout. 5144 */ 5145 if (cp->to_abort == 2) 5146 sym_set_cam_status(cp->cam_ccb, CAM_CMD_TIMEOUT); 5147 cp->to_abort = 0; /* We donnot expect to fail here */ 5148 break; 5149 5150 /* 5151 * The target has accepted our message and switched 5152 * to BUS FREE phase as we expected. 5153 */ 5154 case SIR_ABORT_SENT: 5155 target = (INB (nc_sdid) & 0xf); 5156 tp = &np->target[target]; 5157 5158 /* 5159 ** If we didn't abort anything, leave here. 5160 */ 5161 if (np->abrt_msg[0] == M_ABORT) 5162 break; 5163 5164 /* 5165 * If we sent a M_RESET, then a hardware reset has 5166 * been performed by the target. 5167 * - Reset everything to async 8 bit 5168 * - Tell ourself to negotiate next time :-) 5169 * - Prepare to clear all disconnected CCBs for 5170 * this target from our task list (lun=task=-1) 5171 */ 5172 lun = -1; 5173 task = -1; 5174 if (np->abrt_msg[0] == M_RESET) { 5175 tp->head.sval = 0; 5176 tp->head.wval = np->rv_scntl3; 5177 tp->head.uval = 0; 5178 tp->tinfo.current.period = 0; 5179 tp->tinfo.current.offset = 0; 5180 tp->tinfo.current.width = BUS_8_BIT; 5181 tp->tinfo.current.options = 0; 5182 } 5183 5184 /* 5185 * Otherwise, check for the LUN and TASK(s) 5186 * concerned by the cancelation. 5187 * If it is not ABORT_TAG then it is CLEAR_QUEUE 5188 * or an ABORT message :-) 5189 */ 5190 else { 5191 lun = np->abrt_msg[0] & 0x3f; 5192 if (np->abrt_msg[1] == M_ABORT_TAG) 5193 task = np->abrt_msg[2]; 5194 } 5195 5196 /* 5197 * Complete all the CCBs the device should have 5198 * aborted due to our 'kiss of death' message. 5199 */ 5200 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 5201 (void) sym_dequeue_from_squeue(np, i, target, lun, -1); 5202 (void) sym_clear_tasks(np, CAM_REQ_ABORTED, target, lun, task); 5203 sym_flush_comp_queue(np, 0); 5204 5205 /* 5206 * If we sent a BDR, make uper layer aware of that. 5207 */ 5208 if (np->abrt_msg[0] == M_RESET) 5209 xpt_async(AC_SENT_BDR, np->path, NULL); 5210 break; 5211 } 5212 5213 /* 5214 * Print to the log the message we intend to send. 5215 */ 5216 if (num == SIR_TARGET_SELECTED) { 5217 PRINT_TARGET(np, target); 5218 sym_printl_hex("control msgout:", np->abrt_msg, 5219 np->abrt_tbl.size); 5220 np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size); 5221 } 5222 5223 /* 5224 * Let the SCRIPTS processor continue. 5225 */ 5226 OUTONB_STD (); 5227 } 5228 5229 /* 5230 * Gerard's alchemy:) that deals with with the data 5231 * pointer for both MDP and the residual calculation. 5232 * 5233 * I didn't want to bloat the code by more than 200 5234 * lignes for the handling of both MDP and the residual. 5235 * This has been achieved by using a data pointer 5236 * representation consisting in an index in the data 5237 * array (dp_sg) and a negative offset (dp_ofs) that 5238 * have the following meaning: 5239 * 5240 * - dp_sg = SYM_CONF_MAX_SG 5241 * we are at the end of the data script. 5242 * - dp_sg < SYM_CONF_MAX_SG 5243 * dp_sg points to the next entry of the scatter array 5244 * we want to transfer. 5245 * - dp_ofs < 0 5246 * dp_ofs represents the residual of bytes of the 5247 * previous entry scatter entry we will send first. 5248 * - dp_ofs = 0 5249 * no residual to send first. 5250 * 5251 * The function sym_evaluate_dp() accepts an arbitray 5252 * offset (basically from the MDP message) and returns 5253 * the corresponding values of dp_sg and dp_ofs. 5254 */ 5255 static int sym_evaluate_dp(hcb_p np, ccb_p cp, u32 scr, int *ofs) 5256 { 5257 u32 dp_scr; 5258 int dp_ofs, dp_sg, dp_sgmin; 5259 int tmp; 5260 struct sym_pmc *pm; 5261 5262 /* 5263 * Compute the resulted data pointer in term of a script 5264 * address within some DATA script and a signed byte offset. 5265 */ 5266 dp_scr = scr; 5267 dp_ofs = *ofs; 5268 if (dp_scr == SCRIPTA_BA (np, pm0_data)) 5269 pm = &cp->phys.pm0; 5270 else if (dp_scr == SCRIPTA_BA (np, pm1_data)) 5271 pm = &cp->phys.pm1; 5272 else 5273 pm = NULL; 5274 5275 if (pm) { 5276 dp_scr = scr_to_cpu(pm->ret); 5277 dp_ofs -= scr_to_cpu(pm->sg.size); 5278 } 5279 5280 /* 5281 * If we are auto-sensing, then we are done. 5282 */ 5283 if (cp->host_flags & HF_SENSE) { 5284 *ofs = dp_ofs; 5285 return 0; 5286 } 5287 5288 /* 5289 * Deduce the index of the sg entry. 5290 * Keep track of the index of the first valid entry. 5291 * If result is dp_sg = SYM_CONF_MAX_SG, then we are at the 5292 * end of the data. 5293 */ 5294 tmp = scr_to_cpu(cp->phys.head.goalp); 5295 dp_sg = SYM_CONF_MAX_SG; 5296 if (dp_scr != tmp) 5297 dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4); 5298 dp_sgmin = SYM_CONF_MAX_SG - cp->segments; 5299 5300 /* 5301 * Move to the sg entry the data pointer belongs to. 5302 * 5303 * If we are inside the data area, we expect result to be: 5304 * 5305 * Either, 5306 * dp_ofs = 0 and dp_sg is the index of the sg entry 5307 * the data pointer belongs to (or the end of the data) 5308 * Or, 5309 * dp_ofs < 0 and dp_sg is the index of the sg entry 5310 * the data pointer belongs to + 1. 5311 */ 5312 if (dp_ofs < 0) { 5313 int n; 5314 while (dp_sg > dp_sgmin) { 5315 --dp_sg; 5316 tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5317 n = dp_ofs + (tmp & 0xffffff); 5318 if (n > 0) { 5319 ++dp_sg; 5320 break; 5321 } 5322 dp_ofs = n; 5323 } 5324 } 5325 else if (dp_ofs > 0) { 5326 while (dp_sg < SYM_CONF_MAX_SG) { 5327 tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5328 dp_ofs -= (tmp & 0xffffff); 5329 ++dp_sg; 5330 if (dp_ofs <= 0) 5331 break; 5332 } 5333 } 5334 5335 /* 5336 * Make sure the data pointer is inside the data area. 5337 * If not, return some error. 5338 */ 5339 if (dp_sg < dp_sgmin || (dp_sg == dp_sgmin && dp_ofs < 0)) 5340 goto out_err; 5341 else if (dp_sg > SYM_CONF_MAX_SG || 5342 (dp_sg == SYM_CONF_MAX_SG && dp_ofs > 0)) 5343 goto out_err; 5344 5345 /* 5346 * Save the extreme pointer if needed. 5347 */ 5348 if (dp_sg > cp->ext_sg || 5349 (dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) { 5350 cp->ext_sg = dp_sg; 5351 cp->ext_ofs = dp_ofs; 5352 } 5353 5354 /* 5355 * Return data. 5356 */ 5357 *ofs = dp_ofs; 5358 return dp_sg; 5359 5360 out_err: 5361 return -1; 5362 } 5363 5364 /* 5365 * chip handler for MODIFY DATA POINTER MESSAGE 5366 * 5367 * We also call this function on IGNORE WIDE RESIDUE 5368 * messages that do not match a SWIDE full condition. 5369 * Btw, we assume in that situation that such a message 5370 * is equivalent to a MODIFY DATA POINTER (offset=-1). 5371 */ 5372 static void sym_modify_dp(hcb_p np, ccb_p cp, int ofs) 5373 { 5374 int dp_ofs = ofs; 5375 u32 dp_scr = INL (nc_temp); 5376 u32 dp_ret; 5377 u32 tmp; 5378 u_char hflags; 5379 int dp_sg; 5380 struct sym_pmc *pm; 5381 5382 /* 5383 * Not supported for auto-sense. 5384 */ 5385 if (cp->host_flags & HF_SENSE) 5386 goto out_reject; 5387 5388 /* 5389 * Apply our alchemy:) (see comments in sym_evaluate_dp()), 5390 * to the resulted data pointer. 5391 */ 5392 dp_sg = sym_evaluate_dp(np, cp, dp_scr, &dp_ofs); 5393 if (dp_sg < 0) 5394 goto out_reject; 5395 5396 /* 5397 * And our alchemy:) allows to easily calculate the data 5398 * script address we want to return for the next data phase. 5399 */ 5400 dp_ret = cpu_to_scr(cp->phys.head.goalp); 5401 dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4); 5402 5403 /* 5404 * If offset / scatter entry is zero we donnot need 5405 * a context for the new current data pointer. 5406 */ 5407 if (dp_ofs == 0) { 5408 dp_scr = dp_ret; 5409 goto out_ok; 5410 } 5411 5412 /* 5413 * Get a context for the new current data pointer. 5414 */ 5415 hflags = INB (HF_PRT); 5416 5417 if (hflags & HF_DP_SAVED) 5418 hflags ^= HF_ACT_PM; 5419 5420 if (!(hflags & HF_ACT_PM)) { 5421 pm = &cp->phys.pm0; 5422 dp_scr = SCRIPTA_BA (np, pm0_data); 5423 } 5424 else { 5425 pm = &cp->phys.pm1; 5426 dp_scr = SCRIPTA_BA (np, pm1_data); 5427 } 5428 5429 hflags &= ~(HF_DP_SAVED); 5430 5431 OUTB (HF_PRT, hflags); 5432 5433 /* 5434 * Set up the new current data pointer. 5435 * ofs < 0 there, and for the next data phase, we 5436 * want to transfer part of the data of the sg entry 5437 * corresponding to index dp_sg-1 prior to returning 5438 * to the main data script. 5439 */ 5440 pm->ret = cpu_to_scr(dp_ret); 5441 tmp = scr_to_cpu(cp->phys.data[dp_sg-1].addr); 5442 tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size) + dp_ofs; 5443 pm->sg.addr = cpu_to_scr(tmp); 5444 pm->sg.size = cpu_to_scr(-dp_ofs); 5445 5446 out_ok: 5447 OUTL (nc_temp, dp_scr); 5448 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5449 return; 5450 5451 out_reject: 5452 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5453 } 5454 5455 /* 5456 * chip calculation of the data residual. 5457 * 5458 * As I used to say, the requirement of data residual 5459 * in SCSI is broken, useless and cannot be achieved 5460 * without huge complexity. 5461 * But most OSes and even the official CAM require it. 5462 * When stupidity happens to be so widely spread inside 5463 * a community, it gets hard to convince. 5464 * 5465 * Anyway, I don't care, since I am not going to use 5466 * any software that considers this data residual as 5467 * a relevant information. :) 5468 */ 5469 static int sym_compute_residual(hcb_p np, ccb_p cp) 5470 { 5471 int dp_sg, dp_sgmin, resid = 0; 5472 int dp_ofs = 0; 5473 5474 /* 5475 * Check for some data lost or just thrown away. 5476 * We are not required to be quite accurate in this 5477 * situation. Btw, if we are odd for output and the 5478 * device claims some more data, it may well happen 5479 * than our residual be zero. :-) 5480 */ 5481 if (cp->xerr_status & (XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) { 5482 if (cp->xerr_status & XE_EXTRA_DATA) 5483 resid -= cp->extra_bytes; 5484 if (cp->xerr_status & XE_SODL_UNRUN) 5485 ++resid; 5486 if (cp->xerr_status & XE_SWIDE_OVRUN) 5487 --resid; 5488 } 5489 5490 /* 5491 * If all data has been transferred, 5492 * there is no residual. 5493 */ 5494 if (cp->phys.head.lastp == cp->phys.head.goalp) 5495 return resid; 5496 5497 /* 5498 * If no data transfer occurs, or if the data 5499 * pointer is weird, return full residual. 5500 */ 5501 if (cp->startp == cp->phys.head.lastp || 5502 sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp), 5503 &dp_ofs) < 0) { 5504 return cp->data_len; 5505 } 5506 5507 /* 5508 * If we were auto-sensing, then we are done. 5509 */ 5510 if (cp->host_flags & HF_SENSE) { 5511 return -dp_ofs; 5512 } 5513 5514 /* 5515 * We are now full comfortable in the computation 5516 * of the data residual (2's complement). 5517 */ 5518 dp_sgmin = SYM_CONF_MAX_SG - cp->segments; 5519 resid = -cp->ext_ofs; 5520 for (dp_sg = cp->ext_sg; dp_sg < SYM_CONF_MAX_SG; ++dp_sg) { 5521 u_int tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5522 resid += (tmp & 0xffffff); 5523 } 5524 5525 /* 5526 * Hopefully, the result is not too wrong. 5527 */ 5528 return resid; 5529 } 5530 5531 /* 5532 * Print out the content of a SCSI message. 5533 */ 5534 static int sym_show_msg (u_char * msg) 5535 { 5536 u_char i; 5537 printf ("%x",*msg); 5538 if (*msg==M_EXTENDED) { 5539 for (i=1;i<8;i++) { 5540 if (i-1>msg[1]) break; 5541 printf ("-%x",msg[i]); 5542 }; 5543 return (i+1); 5544 } else if ((*msg & 0xf0) == 0x20) { 5545 printf ("-%x",msg[1]); 5546 return (2); 5547 }; 5548 return (1); 5549 } 5550 5551 static void sym_print_msg (ccb_p cp, char *label, u_char *msg) 5552 { 5553 PRINT_ADDR(cp); 5554 if (label) 5555 printf ("%s: ", label); 5556 5557 (void) sym_show_msg (msg); 5558 printf (".\n"); 5559 } 5560 5561 /* 5562 * Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER. 5563 * 5564 * When we try to negotiate, we append the negotiation message 5565 * to the identify and (maybe) simple tag message. 5566 * The host status field is set to HS_NEGOTIATE to mark this 5567 * situation. 5568 * 5569 * If the target doesn't answer this message immediately 5570 * (as required by the standard), the SIR_NEGO_FAILED interrupt 5571 * will be raised eventually. 5572 * The handler removes the HS_NEGOTIATE status, and sets the 5573 * negotiated value to the default (async / nowide). 5574 * 5575 * If we receive a matching answer immediately, we check it 5576 * for validity, and set the values. 5577 * 5578 * If we receive a Reject message immediately, we assume the 5579 * negotiation has failed, and fall back to standard values. 5580 * 5581 * If we receive a negotiation message while not in HS_NEGOTIATE 5582 * state, it's a target initiated negotiation. We prepare a 5583 * (hopefully) valid answer, set our parameters, and send back 5584 * this answer to the target. 5585 * 5586 * If the target doesn't fetch the answer (no message out phase), 5587 * we assume the negotiation has failed, and fall back to default 5588 * settings (SIR_NEGO_PROTO interrupt). 5589 * 5590 * When we set the values, we adjust them in all ccbs belonging 5591 * to this target, in the controller's register, and in the "phys" 5592 * field of the controller's struct sym_hcb. 5593 */ 5594 5595 /* 5596 * chip handler for SYNCHRONOUS DATA TRANSFER REQUEST (SDTR) message. 5597 */ 5598 static void sym_sync_nego(hcb_p np, tcb_p tp, ccb_p cp) 5599 { 5600 u_char chg, ofs, per, fak, div; 5601 int req = 1; 5602 5603 /* 5604 * Synchronous request message received. 5605 */ 5606 if (DEBUG_FLAGS & DEBUG_NEGO) { 5607 sym_print_msg(cp, "sync msgin", np->msgin); 5608 }; 5609 5610 /* 5611 * request or answer ? 5612 */ 5613 if (INB (HS_PRT) == HS_NEGOTIATE) { 5614 OUTB (HS_PRT, HS_BUSY); 5615 if (cp->nego_status && cp->nego_status != NS_SYNC) 5616 goto reject_it; 5617 req = 0; 5618 } 5619 5620 /* 5621 * get requested values. 5622 */ 5623 chg = 0; 5624 per = np->msgin[3]; 5625 ofs = np->msgin[4]; 5626 5627 /* 5628 * check values against our limits. 5629 */ 5630 if (ofs) { 5631 if (ofs > np->maxoffs) 5632 {chg = 1; ofs = np->maxoffs;} 5633 if (req) { 5634 if (ofs > tp->tinfo.user.offset) 5635 {chg = 1; ofs = tp->tinfo.user.offset;} 5636 } 5637 } 5638 5639 if (ofs) { 5640 if (per < np->minsync) 5641 {chg = 1; per = np->minsync;} 5642 if (req) { 5643 if (per < tp->tinfo.user.period) 5644 {chg = 1; per = tp->tinfo.user.period;} 5645 } 5646 } 5647 5648 div = fak = 0; 5649 if (ofs && sym_getsync(np, 0, per, &div, &fak) < 0) 5650 goto reject_it; 5651 5652 if (DEBUG_FLAGS & DEBUG_NEGO) { 5653 PRINT_ADDR(cp); 5654 printf ("sdtr: ofs=%d per=%d div=%d fak=%d chg=%d.\n", 5655 ofs, per, div, fak, chg); 5656 } 5657 5658 /* 5659 * This was an answer message 5660 */ 5661 if (req == 0) { 5662 if (chg) /* Answer wasn't acceptable. */ 5663 goto reject_it; 5664 sym_setsync (np, cp, ofs, per, div, fak); 5665 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5666 return; 5667 } 5668 5669 /* 5670 * It was a request. Set value and 5671 * prepare an answer message 5672 */ 5673 sym_setsync (np, cp, ofs, per, div, fak); 5674 5675 np->msgout[0] = M_EXTENDED; 5676 np->msgout[1] = 3; 5677 np->msgout[2] = M_X_SYNC_REQ; 5678 np->msgout[3] = per; 5679 np->msgout[4] = ofs; 5680 5681 cp->nego_status = NS_SYNC; 5682 5683 if (DEBUG_FLAGS & DEBUG_NEGO) { 5684 sym_print_msg(cp, "sync msgout", np->msgout); 5685 } 5686 5687 np->msgin [0] = M_NOOP; 5688 5689 OUTL_DSP (SCRIPTB_BA (np, sdtr_resp)); 5690 return; 5691 reject_it: 5692 sym_setsync (np, cp, 0, 0, 0, 0); 5693 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5694 } 5695 5696 /* 5697 * chip handler for PARALLEL PROTOCOL REQUEST (PPR) message. 5698 */ 5699 static void sym_ppr_nego(hcb_p np, tcb_p tp, ccb_p cp) 5700 { 5701 u_char chg, ofs, per, fak, dt, div, wide; 5702 int req = 1; 5703 5704 /* 5705 * Synchronous request message received. 5706 */ 5707 if (DEBUG_FLAGS & DEBUG_NEGO) { 5708 sym_print_msg(cp, "ppr msgin", np->msgin); 5709 }; 5710 5711 /* 5712 * get requested values. 5713 */ 5714 chg = 0; 5715 per = np->msgin[3]; 5716 ofs = np->msgin[5]; 5717 wide = np->msgin[6]; 5718 dt = np->msgin[7] & PPR_OPT_DT; 5719 5720 /* 5721 * request or answer ? 5722 */ 5723 if (INB (HS_PRT) == HS_NEGOTIATE) { 5724 OUTB (HS_PRT, HS_BUSY); 5725 if (cp->nego_status && cp->nego_status != NS_PPR) 5726 goto reject_it; 5727 req = 0; 5728 } 5729 5730 /* 5731 * check values against our limits. 5732 */ 5733 if (wide > np->maxwide) 5734 {chg = 1; wide = np->maxwide;} 5735 if (!wide || !(np->features & FE_ULTRA3)) 5736 dt &= ~PPR_OPT_DT; 5737 if (req) { 5738 if (wide > tp->tinfo.user.width) 5739 {chg = 1; wide = tp->tinfo.user.width;} 5740 } 5741 5742 if (!(np->features & FE_U3EN)) /* Broken U3EN bit not supported */ 5743 dt &= ~PPR_OPT_DT; 5744 5745 if (dt != (np->msgin[7] & PPR_OPT_MASK)) chg = 1; 5746 5747 if (ofs) { 5748 if (dt) { 5749 if (ofs > np->maxoffs_dt) 5750 {chg = 1; ofs = np->maxoffs_dt;} 5751 } 5752 else if (ofs > np->maxoffs) 5753 {chg = 1; ofs = np->maxoffs;} 5754 if (req) { 5755 if (ofs > tp->tinfo.user.offset) 5756 {chg = 1; ofs = tp->tinfo.user.offset;} 5757 } 5758 } 5759 5760 if (ofs) { 5761 if (dt) { 5762 if (per < np->minsync_dt) 5763 {chg = 1; per = np->minsync_dt;} 5764 } 5765 else if (per < np->minsync) 5766 {chg = 1; per = np->minsync;} 5767 if (req) { 5768 if (per < tp->tinfo.user.period) 5769 {chg = 1; per = tp->tinfo.user.period;} 5770 } 5771 } 5772 5773 div = fak = 0; 5774 if (ofs && sym_getsync(np, dt, per, &div, &fak) < 0) 5775 goto reject_it; 5776 5777 if (DEBUG_FLAGS & DEBUG_NEGO) { 5778 PRINT_ADDR(cp); 5779 printf ("ppr: " 5780 "dt=%x ofs=%d per=%d wide=%d div=%d fak=%d chg=%d.\n", 5781 dt, ofs, per, wide, div, fak, chg); 5782 } 5783 5784 /* 5785 * It was an answer. 5786 */ 5787 if (req == 0) { 5788 if (chg) /* Answer wasn't acceptable */ 5789 goto reject_it; 5790 sym_setpprot (np, cp, dt, ofs, per, wide, div, fak); 5791 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5792 return; 5793 } 5794 5795 /* 5796 * It was a request. Set value and 5797 * prepare an answer message 5798 */ 5799 sym_setpprot (np, cp, dt, ofs, per, wide, div, fak); 5800 5801 np->msgout[0] = M_EXTENDED; 5802 np->msgout[1] = 6; 5803 np->msgout[2] = M_X_PPR_REQ; 5804 np->msgout[3] = per; 5805 np->msgout[4] = 0; 5806 np->msgout[5] = ofs; 5807 np->msgout[6] = wide; 5808 np->msgout[7] = dt; 5809 5810 cp->nego_status = NS_PPR; 5811 5812 if (DEBUG_FLAGS & DEBUG_NEGO) { 5813 sym_print_msg(cp, "ppr msgout", np->msgout); 5814 } 5815 5816 np->msgin [0] = M_NOOP; 5817 5818 OUTL_DSP (SCRIPTB_BA (np, ppr_resp)); 5819 return; 5820 reject_it: 5821 sym_setpprot (np, cp, 0, 0, 0, 0, 0, 0); 5822 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5823 /* 5824 * If it was a device response that should result in 5825 * ST, we may want to try a legacy negotiation later. 5826 */ 5827 if (!req && !dt) { 5828 tp->tinfo.goal.options = 0; 5829 tp->tinfo.goal.width = wide; 5830 tp->tinfo.goal.period = per; 5831 tp->tinfo.goal.offset = ofs; 5832 } 5833 } 5834 5835 /* 5836 * chip handler for WIDE DATA TRANSFER REQUEST (WDTR) message. 5837 */ 5838 static void sym_wide_nego(hcb_p np, tcb_p tp, ccb_p cp) 5839 { 5840 u_char chg, wide; 5841 int req = 1; 5842 5843 /* 5844 * Wide request message received. 5845 */ 5846 if (DEBUG_FLAGS & DEBUG_NEGO) { 5847 sym_print_msg(cp, "wide msgin", np->msgin); 5848 }; 5849 5850 /* 5851 * Is it a request from the device? 5852 */ 5853 if (INB (HS_PRT) == HS_NEGOTIATE) { 5854 OUTB (HS_PRT, HS_BUSY); 5855 if (cp->nego_status && cp->nego_status != NS_WIDE) 5856 goto reject_it; 5857 req = 0; 5858 } 5859 5860 /* 5861 * get requested values. 5862 */ 5863 chg = 0; 5864 wide = np->msgin[3]; 5865 5866 /* 5867 * check values against driver limits. 5868 */ 5869 if (wide > np->maxwide) 5870 {chg = 1; wide = np->maxwide;} 5871 if (req) { 5872 if (wide > tp->tinfo.user.width) 5873 {chg = 1; wide = tp->tinfo.user.width;} 5874 } 5875 5876 if (DEBUG_FLAGS & DEBUG_NEGO) { 5877 PRINT_ADDR(cp); 5878 printf ("wdtr: wide=%d chg=%d.\n", wide, chg); 5879 } 5880 5881 /* 5882 * This was an answer message 5883 */ 5884 if (req == 0) { 5885 if (chg) /* Answer wasn't acceptable. */ 5886 goto reject_it; 5887 sym_setwide (np, cp, wide); 5888 5889 /* 5890 * Negotiate for SYNC immediately after WIDE response. 5891 * This allows to negotiate for both WIDE and SYNC on 5892 * a single SCSI command (Suggested by Justin Gibbs). 5893 */ 5894 if (tp->tinfo.goal.offset) { 5895 np->msgout[0] = M_EXTENDED; 5896 np->msgout[1] = 3; 5897 np->msgout[2] = M_X_SYNC_REQ; 5898 np->msgout[3] = tp->tinfo.goal.period; 5899 np->msgout[4] = tp->tinfo.goal.offset; 5900 5901 if (DEBUG_FLAGS & DEBUG_NEGO) { 5902 sym_print_msg(cp, "sync msgout", np->msgout); 5903 } 5904 5905 cp->nego_status = NS_SYNC; 5906 OUTB (HS_PRT, HS_NEGOTIATE); 5907 OUTL_DSP (SCRIPTB_BA (np, sdtr_resp)); 5908 return; 5909 } 5910 5911 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5912 return; 5913 }; 5914 5915 /* 5916 * It was a request, set value and 5917 * prepare an answer message 5918 */ 5919 sym_setwide (np, cp, wide); 5920 5921 np->msgout[0] = M_EXTENDED; 5922 np->msgout[1] = 2; 5923 np->msgout[2] = M_X_WIDE_REQ; 5924 np->msgout[3] = wide; 5925 5926 np->msgin [0] = M_NOOP; 5927 5928 cp->nego_status = NS_WIDE; 5929 5930 if (DEBUG_FLAGS & DEBUG_NEGO) { 5931 sym_print_msg(cp, "wide msgout", np->msgout); 5932 } 5933 5934 OUTL_DSP (SCRIPTB_BA (np, wdtr_resp)); 5935 return; 5936 reject_it: 5937 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5938 } 5939 5940 /* 5941 * Reset SYNC or WIDE to default settings. 5942 * 5943 * Called when a negotiation does not succeed either 5944 * on rejection or on protocol error. 5945 * 5946 * If it was a PPR that made problems, we may want to 5947 * try a legacy negotiation later. 5948 */ 5949 static void sym_nego_default(hcb_p np, tcb_p tp, ccb_p cp) 5950 { 5951 /* 5952 * any error in negotiation: 5953 * fall back to default mode. 5954 */ 5955 switch (cp->nego_status) { 5956 case NS_PPR: 5957 #if 0 5958 sym_setpprot (np, cp, 0, 0, 0, 0, 0, 0); 5959 #else 5960 tp->tinfo.goal.options = 0; 5961 if (tp->tinfo.goal.period < np->minsync) 5962 tp->tinfo.goal.period = np->minsync; 5963 if (tp->tinfo.goal.offset > np->maxoffs) 5964 tp->tinfo.goal.offset = np->maxoffs; 5965 #endif 5966 break; 5967 case NS_SYNC: 5968 sym_setsync (np, cp, 0, 0, 0, 0); 5969 break; 5970 case NS_WIDE: 5971 sym_setwide (np, cp, 0); 5972 break; 5973 }; 5974 np->msgin [0] = M_NOOP; 5975 np->msgout[0] = M_NOOP; 5976 cp->nego_status = 0; 5977 } 5978 5979 /* 5980 * chip handler for MESSAGE REJECT received in response to 5981 * a WIDE or SYNCHRONOUS negotiation. 5982 */ 5983 static void sym_nego_rejected(hcb_p np, tcb_p tp, ccb_p cp) 5984 { 5985 sym_nego_default(np, tp, cp); 5986 OUTB (HS_PRT, HS_BUSY); 5987 } 5988 5989 /* 5990 * chip exception handler for programmed interrupts. 5991 */ 5992 static void sym_int_sir (hcb_p np) 5993 { 5994 u_char num = INB (nc_dsps); 5995 u32 dsa = INL (nc_dsa); 5996 ccb_p cp = sym_ccb_from_dsa(np, dsa); 5997 u_char target = INB (nc_sdid) & 0x0f; 5998 tcb_p tp = &np->target[target]; 5999 int tmp; 6000 6001 SYM_LOCK_ASSERT(MA_OWNED); 6002 6003 if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num); 6004 6005 switch (num) { 6006 /* 6007 * Command has been completed with error condition 6008 * or has been auto-sensed. 6009 */ 6010 case SIR_COMPLETE_ERROR: 6011 sym_complete_error(np, cp); 6012 return; 6013 /* 6014 * The C code is currently trying to recover from something. 6015 * Typically, user want to abort some command. 6016 */ 6017 case SIR_SCRIPT_STOPPED: 6018 case SIR_TARGET_SELECTED: 6019 case SIR_ABORT_SENT: 6020 sym_sir_task_recovery(np, num); 6021 return; 6022 /* 6023 * The device didn't go to MSG OUT phase after having 6024 * been selected with ATN. We donnot want to handle 6025 * that. 6026 */ 6027 case SIR_SEL_ATN_NO_MSG_OUT: 6028 printf ("%s:%d: No MSG OUT phase after selection with ATN.\n", 6029 sym_name (np), target); 6030 goto out_stuck; 6031 /* 6032 * The device didn't switch to MSG IN phase after 6033 * having reseleted the initiator. 6034 */ 6035 case SIR_RESEL_NO_MSG_IN: 6036 printf ("%s:%d: No MSG IN phase after reselection.\n", 6037 sym_name (np), target); 6038 goto out_stuck; 6039 /* 6040 * After reselection, the device sent a message that wasn't 6041 * an IDENTIFY. 6042 */ 6043 case SIR_RESEL_NO_IDENTIFY: 6044 printf ("%s:%d: No IDENTIFY after reselection.\n", 6045 sym_name (np), target); 6046 goto out_stuck; 6047 /* 6048 * The device reselected a LUN we donnot know about. 6049 */ 6050 case SIR_RESEL_BAD_LUN: 6051 np->msgout[0] = M_RESET; 6052 goto out; 6053 /* 6054 * The device reselected for an untagged nexus and we 6055 * haven't any. 6056 */ 6057 case SIR_RESEL_BAD_I_T_L: 6058 np->msgout[0] = M_ABORT; 6059 goto out; 6060 /* 6061 * The device reselected for a tagged nexus that we donnot 6062 * have. 6063 */ 6064 case SIR_RESEL_BAD_I_T_L_Q: 6065 np->msgout[0] = M_ABORT_TAG; 6066 goto out; 6067 /* 6068 * The SCRIPTS let us know that the device has grabbed 6069 * our message and will abort the job. 6070 */ 6071 case SIR_RESEL_ABORTED: 6072 np->lastmsg = np->msgout[0]; 6073 np->msgout[0] = M_NOOP; 6074 printf ("%s:%d: message %x sent on bad reselection.\n", 6075 sym_name (np), target, np->lastmsg); 6076 goto out; 6077 /* 6078 * The SCRIPTS let us know that a message has been 6079 * successfully sent to the device. 6080 */ 6081 case SIR_MSG_OUT_DONE: 6082 np->lastmsg = np->msgout[0]; 6083 np->msgout[0] = M_NOOP; 6084 /* Should we really care of that */ 6085 if (np->lastmsg == M_PARITY || np->lastmsg == M_ID_ERROR) { 6086 if (cp) { 6087 cp->xerr_status &= ~XE_PARITY_ERR; 6088 if (!cp->xerr_status) 6089 OUTOFFB (HF_PRT, HF_EXT_ERR); 6090 } 6091 } 6092 goto out; 6093 /* 6094 * The device didn't send a GOOD SCSI status. 6095 * We may have some work to do prior to allow 6096 * the SCRIPTS processor to continue. 6097 */ 6098 case SIR_BAD_SCSI_STATUS: 6099 if (!cp) 6100 goto out; 6101 sym_sir_bad_scsi_status(np, cp); 6102 return; 6103 /* 6104 * We are asked by the SCRIPTS to prepare a 6105 * REJECT message. 6106 */ 6107 case SIR_REJECT_TO_SEND: 6108 sym_print_msg(cp, "M_REJECT to send for ", np->msgin); 6109 np->msgout[0] = M_REJECT; 6110 goto out; 6111 /* 6112 * We have been ODD at the end of a DATA IN 6113 * transfer and the device didn't send a 6114 * IGNORE WIDE RESIDUE message. 6115 * It is a data overrun condition. 6116 */ 6117 case SIR_SWIDE_OVERRUN: 6118 if (cp) { 6119 OUTONB (HF_PRT, HF_EXT_ERR); 6120 cp->xerr_status |= XE_SWIDE_OVRUN; 6121 } 6122 goto out; 6123 /* 6124 * We have been ODD at the end of a DATA OUT 6125 * transfer. 6126 * It is a data underrun condition. 6127 */ 6128 case SIR_SODL_UNDERRUN: 6129 if (cp) { 6130 OUTONB (HF_PRT, HF_EXT_ERR); 6131 cp->xerr_status |= XE_SODL_UNRUN; 6132 } 6133 goto out; 6134 /* 6135 * The device wants us to tranfer more data than 6136 * expected or in the wrong direction. 6137 * The number of extra bytes is in scratcha. 6138 * It is a data overrun condition. 6139 */ 6140 case SIR_DATA_OVERRUN: 6141 if (cp) { 6142 OUTONB (HF_PRT, HF_EXT_ERR); 6143 cp->xerr_status |= XE_EXTRA_DATA; 6144 cp->extra_bytes += INL (nc_scratcha); 6145 } 6146 goto out; 6147 /* 6148 * The device switched to an illegal phase (4/5). 6149 */ 6150 case SIR_BAD_PHASE: 6151 if (cp) { 6152 OUTONB (HF_PRT, HF_EXT_ERR); 6153 cp->xerr_status |= XE_BAD_PHASE; 6154 } 6155 goto out; 6156 /* 6157 * We received a message. 6158 */ 6159 case SIR_MSG_RECEIVED: 6160 if (!cp) 6161 goto out_stuck; 6162 switch (np->msgin [0]) { 6163 /* 6164 * We received an extended message. 6165 * We handle MODIFY DATA POINTER, SDTR, WDTR 6166 * and reject all other extended messages. 6167 */ 6168 case M_EXTENDED: 6169 switch (np->msgin [2]) { 6170 case M_X_MODIFY_DP: 6171 if (DEBUG_FLAGS & DEBUG_POINTER) 6172 sym_print_msg(cp,"modify DP",np->msgin); 6173 tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) + 6174 (np->msgin[5]<<8) + (np->msgin[6]); 6175 sym_modify_dp(np, cp, tmp); 6176 return; 6177 case M_X_SYNC_REQ: 6178 sym_sync_nego(np, tp, cp); 6179 return; 6180 case M_X_PPR_REQ: 6181 sym_ppr_nego(np, tp, cp); 6182 return; 6183 case M_X_WIDE_REQ: 6184 sym_wide_nego(np, tp, cp); 6185 return; 6186 default: 6187 goto out_reject; 6188 } 6189 break; 6190 /* 6191 * We received a 1/2 byte message not handled from SCRIPTS. 6192 * We are only expecting MESSAGE REJECT and IGNORE WIDE 6193 * RESIDUE messages that haven't been anticipated by 6194 * SCRIPTS on SWIDE full condition. Unanticipated IGNORE 6195 * WIDE RESIDUE messages are aliased as MODIFY DP (-1). 6196 */ 6197 case M_IGN_RESIDUE: 6198 if (DEBUG_FLAGS & DEBUG_POINTER) 6199 sym_print_msg(cp,"ign wide residue", np->msgin); 6200 sym_modify_dp(np, cp, -1); 6201 return; 6202 case M_REJECT: 6203 if (INB (HS_PRT) == HS_NEGOTIATE) 6204 sym_nego_rejected(np, tp, cp); 6205 else { 6206 PRINT_ADDR(cp); 6207 printf ("M_REJECT received (%x:%x).\n", 6208 scr_to_cpu(np->lastmsg), np->msgout[0]); 6209 } 6210 goto out_clrack; 6211 break; 6212 default: 6213 goto out_reject; 6214 } 6215 break; 6216 /* 6217 * We received an unknown message. 6218 * Ignore all MSG IN phases and reject it. 6219 */ 6220 case SIR_MSG_WEIRD: 6221 sym_print_msg(cp, "WEIRD message received", np->msgin); 6222 OUTL_DSP (SCRIPTB_BA (np, msg_weird)); 6223 return; 6224 /* 6225 * Negotiation failed. 6226 * Target does not send us the reply. 6227 * Remove the HS_NEGOTIATE status. 6228 */ 6229 case SIR_NEGO_FAILED: 6230 OUTB (HS_PRT, HS_BUSY); 6231 /* 6232 * Negotiation failed. 6233 * Target does not want answer message. 6234 */ 6235 case SIR_NEGO_PROTO: 6236 sym_nego_default(np, tp, cp); 6237 goto out; 6238 }; 6239 6240 out: 6241 OUTONB_STD (); 6242 return; 6243 out_reject: 6244 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 6245 return; 6246 out_clrack: 6247 OUTL_DSP (SCRIPTA_BA (np, clrack)); 6248 return; 6249 out_stuck: 6250 return; 6251 } 6252 6253 /* 6254 * Acquire a control block 6255 */ 6256 static ccb_p sym_get_ccb (hcb_p np, u_char tn, u_char ln, u_char tag_order) 6257 { 6258 tcb_p tp = &np->target[tn]; 6259 lcb_p lp = sym_lp(tp, ln); 6260 u_short tag = NO_TAG; 6261 SYM_QUEHEAD *qp; 6262 ccb_p cp = (ccb_p) NULL; 6263 6264 /* 6265 * Look for a free CCB 6266 */ 6267 if (sym_que_empty(&np->free_ccbq)) 6268 goto out; 6269 qp = sym_remque_head(&np->free_ccbq); 6270 if (!qp) 6271 goto out; 6272 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 6273 6274 /* 6275 * If the LCB is not yet available and the LUN 6276 * has been probed ok, try to allocate the LCB. 6277 */ 6278 if (!lp && sym_is_bit(tp->lun_map, ln)) { 6279 lp = sym_alloc_lcb(np, tn, ln); 6280 if (!lp) 6281 goto out_free; 6282 } 6283 6284 /* 6285 * If the LCB is not available here, then the 6286 * logical unit is not yet discovered. For those 6287 * ones only accept 1 SCSI IO per logical unit, 6288 * since we cannot allow disconnections. 6289 */ 6290 if (!lp) { 6291 if (!sym_is_bit(tp->busy0_map, ln)) 6292 sym_set_bit(tp->busy0_map, ln); 6293 else 6294 goto out_free; 6295 } else { 6296 /* 6297 * If we have been asked for a tagged command. 6298 */ 6299 if (tag_order) { 6300 /* 6301 * Debugging purpose. 6302 */ 6303 assert(lp->busy_itl == 0); 6304 /* 6305 * Allocate resources for tags if not yet. 6306 */ 6307 if (!lp->cb_tags) { 6308 sym_alloc_lcb_tags(np, tn, ln); 6309 if (!lp->cb_tags) 6310 goto out_free; 6311 } 6312 /* 6313 * Get a tag for this SCSI IO and set up 6314 * the CCB bus address for reselection, 6315 * and count it for this LUN. 6316 * Toggle reselect path to tagged. 6317 */ 6318 if (lp->busy_itlq < SYM_CONF_MAX_TASK) { 6319 tag = lp->cb_tags[lp->ia_tag]; 6320 if (++lp->ia_tag == SYM_CONF_MAX_TASK) 6321 lp->ia_tag = 0; 6322 lp->itlq_tbl[tag] = cpu_to_scr(cp->ccb_ba); 6323 ++lp->busy_itlq; 6324 lp->head.resel_sa = 6325 cpu_to_scr(SCRIPTA_BA (np, resel_tag)); 6326 } 6327 else 6328 goto out_free; 6329 } 6330 /* 6331 * This command will not be tagged. 6332 * If we already have either a tagged or untagged 6333 * one, refuse to overlap this untagged one. 6334 */ 6335 else { 6336 /* 6337 * Debugging purpose. 6338 */ 6339 assert(lp->busy_itl == 0 && lp->busy_itlq == 0); 6340 /* 6341 * Count this nexus for this LUN. 6342 * Set up the CCB bus address for reselection. 6343 * Toggle reselect path to untagged. 6344 */ 6345 if (++lp->busy_itl == 1) { 6346 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba); 6347 lp->head.resel_sa = 6348 cpu_to_scr(SCRIPTA_BA (np, resel_no_tag)); 6349 } 6350 else 6351 goto out_free; 6352 } 6353 } 6354 /* 6355 * Put the CCB into the busy queue. 6356 */ 6357 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 6358 6359 /* 6360 * Remember all informations needed to free this CCB. 6361 */ 6362 cp->to_abort = 0; 6363 cp->tag = tag; 6364 cp->target = tn; 6365 cp->lun = ln; 6366 6367 if (DEBUG_FLAGS & DEBUG_TAGS) { 6368 PRINT_LUN(np, tn, ln); 6369 printf ("ccb @%p using tag %d.\n", cp, tag); 6370 } 6371 6372 out: 6373 return cp; 6374 out_free: 6375 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6376 return NULL; 6377 } 6378 6379 /* 6380 * Release one control block 6381 */ 6382 static void sym_free_ccb(hcb_p np, ccb_p cp) 6383 { 6384 tcb_p tp = &np->target[cp->target]; 6385 lcb_p lp = sym_lp(tp, cp->lun); 6386 6387 if (DEBUG_FLAGS & DEBUG_TAGS) { 6388 PRINT_LUN(np, cp->target, cp->lun); 6389 printf ("ccb @%p freeing tag %d.\n", cp, cp->tag); 6390 } 6391 6392 /* 6393 * If LCB available, 6394 */ 6395 if (lp) { 6396 /* 6397 * If tagged, release the tag, set the relect path 6398 */ 6399 if (cp->tag != NO_TAG) { 6400 /* 6401 * Free the tag value. 6402 */ 6403 lp->cb_tags[lp->if_tag] = cp->tag; 6404 if (++lp->if_tag == SYM_CONF_MAX_TASK) 6405 lp->if_tag = 0; 6406 /* 6407 * Make the reselect path invalid, 6408 * and uncount this CCB. 6409 */ 6410 lp->itlq_tbl[cp->tag] = cpu_to_scr(np->bad_itlq_ba); 6411 --lp->busy_itlq; 6412 } else { /* Untagged */ 6413 /* 6414 * Make the reselect path invalid, 6415 * and uncount this CCB. 6416 */ 6417 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba); 6418 --lp->busy_itl; 6419 } 6420 /* 6421 * If no JOB active, make the LUN reselect path invalid. 6422 */ 6423 if (lp->busy_itlq == 0 && lp->busy_itl == 0) 6424 lp->head.resel_sa = 6425 cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 6426 } 6427 /* 6428 * Otherwise, we only accept 1 IO per LUN. 6429 * Clear the bit that keeps track of this IO. 6430 */ 6431 else 6432 sym_clr_bit(tp->busy0_map, cp->lun); 6433 6434 /* 6435 * We donnot queue more than 1 ccb per target 6436 * with negotiation at any time. If this ccb was 6437 * used for negotiation, clear this info in the tcb. 6438 */ 6439 if (cp == tp->nego_cp) 6440 tp->nego_cp = NULL; 6441 6442 #ifdef SYM_CONF_IARB_SUPPORT 6443 /* 6444 * If we just complete the last queued CCB, 6445 * clear this info that is no longer relevant. 6446 */ 6447 if (cp == np->last_cp) 6448 np->last_cp = NULL; 6449 #endif 6450 6451 /* 6452 * Unmap user data from DMA map if needed. 6453 */ 6454 if (cp->dmamapped) { 6455 bus_dmamap_unload(np->data_dmat, cp->dmamap); 6456 cp->dmamapped = 0; 6457 } 6458 6459 /* 6460 * Make this CCB available. 6461 */ 6462 cp->cam_ccb = NULL; 6463 cp->host_status = HS_IDLE; 6464 sym_remque(&cp->link_ccbq); 6465 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6466 } 6467 6468 /* 6469 * Allocate a CCB from memory and initialize its fixed part. 6470 */ 6471 static ccb_p sym_alloc_ccb(hcb_p np) 6472 { 6473 ccb_p cp = NULL; 6474 int hcode; 6475 6476 SYM_LOCK_ASSERT(MA_NOTOWNED); 6477 6478 /* 6479 * Prevent from allocating more CCBs than we can 6480 * queue to the controller. 6481 */ 6482 if (np->actccbs >= SYM_CONF_MAX_START) 6483 return NULL; 6484 6485 /* 6486 * Allocate memory for this CCB. 6487 */ 6488 cp = sym_calloc_dma(sizeof(struct sym_ccb), "CCB"); 6489 if (!cp) 6490 return NULL; 6491 6492 /* 6493 * Allocate a bounce buffer for sense data. 6494 */ 6495 cp->sns_bbuf = sym_calloc_dma(SYM_SNS_BBUF_LEN, "SNS_BBUF"); 6496 if (!cp->sns_bbuf) 6497 goto out_free; 6498 6499 /* 6500 * Allocate a map for the DMA of user data. 6501 */ 6502 if (bus_dmamap_create(np->data_dmat, 0, &cp->dmamap)) 6503 goto out_free; 6504 /* 6505 * Count it. 6506 */ 6507 np->actccbs++; 6508 6509 /* 6510 * Initialize the callout. 6511 */ 6512 callout_init(&cp->ch, 1); 6513 6514 /* 6515 * Compute the bus address of this ccb. 6516 */ 6517 cp->ccb_ba = vtobus(cp); 6518 6519 /* 6520 * Insert this ccb into the hashed list. 6521 */ 6522 hcode = CCB_HASH_CODE(cp->ccb_ba); 6523 cp->link_ccbh = np->ccbh[hcode]; 6524 np->ccbh[hcode] = cp; 6525 6526 /* 6527 * Initialize the start and restart actions. 6528 */ 6529 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 6530 cp->phys.head.go.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 6531 6532 /* 6533 * Initilialyze some other fields. 6534 */ 6535 cp->phys.smsg_ext.addr = cpu_to_scr(HCB_BA(np, msgin[2])); 6536 6537 /* 6538 * Chain into free ccb queue. 6539 */ 6540 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6541 6542 return cp; 6543 out_free: 6544 if (cp->sns_bbuf) 6545 sym_mfree_dma(cp->sns_bbuf, SYM_SNS_BBUF_LEN, "SNS_BBUF"); 6546 sym_mfree_dma(cp, sizeof(*cp), "CCB"); 6547 return NULL; 6548 } 6549 6550 /* 6551 * Look up a CCB from a DSA value. 6552 */ 6553 static ccb_p sym_ccb_from_dsa(hcb_p np, u32 dsa) 6554 { 6555 int hcode; 6556 ccb_p cp; 6557 6558 hcode = CCB_HASH_CODE(dsa); 6559 cp = np->ccbh[hcode]; 6560 while (cp) { 6561 if (cp->ccb_ba == dsa) 6562 break; 6563 cp = cp->link_ccbh; 6564 } 6565 6566 return cp; 6567 } 6568 6569 /* 6570 * Lun control block allocation and initialization. 6571 */ 6572 static lcb_p sym_alloc_lcb (hcb_p np, u_char tn, u_char ln) 6573 { 6574 tcb_p tp = &np->target[tn]; 6575 lcb_p lp = sym_lp(tp, ln); 6576 6577 /* 6578 * Already done, just return. 6579 */ 6580 if (lp) 6581 return lp; 6582 /* 6583 * Check against some race. 6584 */ 6585 assert(!sym_is_bit(tp->busy0_map, ln)); 6586 6587 /* 6588 * Allocate the LCB bus address array. 6589 * Compute the bus address of this table. 6590 */ 6591 if (ln && !tp->luntbl) { 6592 int i; 6593 6594 tp->luntbl = sym_calloc_dma(256, "LUNTBL"); 6595 if (!tp->luntbl) 6596 goto fail; 6597 for (i = 0 ; i < 64 ; i++) 6598 tp->luntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa)); 6599 tp->head.luntbl_sa = cpu_to_scr(vtobus(tp->luntbl)); 6600 } 6601 6602 /* 6603 * Allocate the table of pointers for LUN(s) > 0, if needed. 6604 */ 6605 if (ln && !tp->lunmp) { 6606 tp->lunmp = sym_calloc(SYM_CONF_MAX_LUN * sizeof(lcb_p), 6607 "LUNMP"); 6608 if (!tp->lunmp) 6609 goto fail; 6610 } 6611 6612 /* 6613 * Allocate the lcb. 6614 * Make it available to the chip. 6615 */ 6616 lp = sym_calloc_dma(sizeof(struct sym_lcb), "LCB"); 6617 if (!lp) 6618 goto fail; 6619 if (ln) { 6620 tp->lunmp[ln] = lp; 6621 tp->luntbl[ln] = cpu_to_scr(vtobus(lp)); 6622 } 6623 else { 6624 tp->lun0p = lp; 6625 tp->head.lun0_sa = cpu_to_scr(vtobus(lp)); 6626 } 6627 6628 /* 6629 * Let the itl task point to error handling. 6630 */ 6631 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba); 6632 6633 /* 6634 * Set the reselect pattern to our default. :) 6635 */ 6636 lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 6637 6638 /* 6639 * Set user capabilities. 6640 */ 6641 lp->user_flags = tp->usrflags & (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); 6642 6643 fail: 6644 return lp; 6645 } 6646 6647 /* 6648 * Allocate LCB resources for tagged command queuing. 6649 */ 6650 static void sym_alloc_lcb_tags (hcb_p np, u_char tn, u_char ln) 6651 { 6652 tcb_p tp = &np->target[tn]; 6653 lcb_p lp = sym_lp(tp, ln); 6654 int i; 6655 6656 /* 6657 * If LCB not available, try to allocate it. 6658 */ 6659 if (!lp && !(lp = sym_alloc_lcb(np, tn, ln))) 6660 return; 6661 6662 /* 6663 * Allocate the task table and and the tag allocation 6664 * circular buffer. We want both or none. 6665 */ 6666 lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); 6667 if (!lp->itlq_tbl) 6668 return; 6669 lp->cb_tags = sym_calloc(SYM_CONF_MAX_TASK, "CB_TAGS"); 6670 if (!lp->cb_tags) { 6671 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); 6672 lp->itlq_tbl = 0; 6673 return; 6674 } 6675 6676 /* 6677 * Initialize the task table with invalid entries. 6678 */ 6679 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++) 6680 lp->itlq_tbl[i] = cpu_to_scr(np->notask_ba); 6681 6682 /* 6683 * Fill up the tag buffer with tag numbers. 6684 */ 6685 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++) 6686 lp->cb_tags[i] = i; 6687 6688 /* 6689 * Make the task table available to SCRIPTS, 6690 * And accept tagged commands now. 6691 */ 6692 lp->head.itlq_tbl_sa = cpu_to_scr(vtobus(lp->itlq_tbl)); 6693 } 6694 6695 /* 6696 * Test the pci bus snoop logic :-( 6697 * 6698 * Has to be called with interrupts disabled. 6699 */ 6700 #ifndef SYM_CONF_IOMAPPED 6701 static int sym_regtest (hcb_p np) 6702 { 6703 register volatile u32 data; 6704 /* 6705 * chip registers may NOT be cached. 6706 * write 0xffffffff to a read only register area, 6707 * and try to read it back. 6708 */ 6709 data = 0xffffffff; 6710 OUTL_OFF(offsetof(struct sym_reg, nc_dstat), data); 6711 data = INL_OFF(offsetof(struct sym_reg, nc_dstat)); 6712 #if 1 6713 if (data == 0xffffffff) { 6714 #else 6715 if ((data & 0xe2f0fffd) != 0x02000080) { 6716 #endif 6717 printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", 6718 (unsigned) data); 6719 return (0x10); 6720 }; 6721 return (0); 6722 } 6723 #endif 6724 6725 static int sym_snooptest (hcb_p np) 6726 { 6727 u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat; 6728 int i, err=0; 6729 #ifndef SYM_CONF_IOMAPPED 6730 err |= sym_regtest (np); 6731 if (err) return (err); 6732 #endif 6733 restart_test: 6734 /* 6735 * Enable Master Parity Checking as we intend 6736 * to enable it for normal operations. 6737 */ 6738 OUTB (nc_ctest4, (np->rv_ctest4 & MPEE)); 6739 /* 6740 * init 6741 */ 6742 pc = SCRIPTB0_BA (np, snooptest); 6743 host_wr = 1; 6744 sym_wr = 2; 6745 /* 6746 * Set memory and register. 6747 */ 6748 np->cache = cpu_to_scr(host_wr); 6749 OUTL (nc_temp, sym_wr); 6750 /* 6751 * Start script (exchange values) 6752 */ 6753 OUTL (nc_dsa, np->hcb_ba); 6754 OUTL_DSP (pc); 6755 /* 6756 * Wait 'til done (with timeout) 6757 */ 6758 for (i=0; i<SYM_SNOOP_TIMEOUT; i++) 6759 if (INB(nc_istat) & (INTF|SIP|DIP)) 6760 break; 6761 if (i>=SYM_SNOOP_TIMEOUT) { 6762 printf ("CACHE TEST FAILED: timeout.\n"); 6763 return (0x20); 6764 }; 6765 /* 6766 * Check for fatal DMA errors. 6767 */ 6768 dstat = INB (nc_dstat); 6769 #if 1 /* Band aiding for broken hardwares that fail PCI parity */ 6770 if ((dstat & MDPE) && (np->rv_ctest4 & MPEE)) { 6771 printf ("%s: PCI DATA PARITY ERROR DETECTED - " 6772 "DISABLING MASTER DATA PARITY CHECKING.\n", 6773 sym_name(np)); 6774 np->rv_ctest4 &= ~MPEE; 6775 goto restart_test; 6776 } 6777 #endif 6778 if (dstat & (MDPE|BF|IID)) { 6779 printf ("CACHE TEST FAILED: DMA error (dstat=0x%02x).", dstat); 6780 return (0x80); 6781 } 6782 /* 6783 * Save termination position. 6784 */ 6785 pc = INL (nc_dsp); 6786 /* 6787 * Read memory and register. 6788 */ 6789 host_rd = scr_to_cpu(np->cache); 6790 sym_rd = INL (nc_scratcha); 6791 sym_bk = INL (nc_temp); 6792 6793 /* 6794 * Check termination position. 6795 */ 6796 if (pc != SCRIPTB0_BA (np, snoopend)+8) { 6797 printf ("CACHE TEST FAILED: script execution failed.\n"); 6798 printf ("start=%08lx, pc=%08lx, end=%08lx\n", 6799 (u_long) SCRIPTB0_BA (np, snooptest), (u_long) pc, 6800 (u_long) SCRIPTB0_BA (np, snoopend) +8); 6801 return (0x40); 6802 }; 6803 /* 6804 * Show results. 6805 */ 6806 if (host_wr != sym_rd) { 6807 printf ("CACHE TEST FAILED: host wrote %d, chip read %d.\n", 6808 (int) host_wr, (int) sym_rd); 6809 err |= 1; 6810 }; 6811 if (host_rd != sym_wr) { 6812 printf ("CACHE TEST FAILED: chip wrote %d, host read %d.\n", 6813 (int) sym_wr, (int) host_rd); 6814 err |= 2; 6815 }; 6816 if (sym_bk != sym_wr) { 6817 printf ("CACHE TEST FAILED: chip wrote %d, read back %d.\n", 6818 (int) sym_wr, (int) sym_bk); 6819 err |= 4; 6820 }; 6821 6822 return (err); 6823 } 6824 6825 /* 6826 * Determine the chip's clock frequency. 6827 * 6828 * This is essential for the negotiation of the synchronous 6829 * transfer rate. 6830 * 6831 * Note: we have to return the correct value. 6832 * THERE IS NO SAFE DEFAULT VALUE. 6833 * 6834 * Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. 6835 * 53C860 and 53C875 rev. 1 support fast20 transfers but 6836 * do not have a clock doubler and so are provided with a 6837 * 80 MHz clock. All other fast20 boards incorporate a doubler 6838 * and so should be delivered with a 40 MHz clock. 6839 * The recent fast40 chips (895/896/895A/1010) use a 40 Mhz base 6840 * clock and provide a clock quadrupler (160 Mhz). 6841 */ 6842 6843 /* 6844 * Select SCSI clock frequency 6845 */ 6846 static void sym_selectclock(hcb_p np, u_char scntl3) 6847 { 6848 /* 6849 * If multiplier not present or not selected, leave here. 6850 */ 6851 if (np->multiplier <= 1) { 6852 OUTB(nc_scntl3, scntl3); 6853 return; 6854 } 6855 6856 if (sym_verbose >= 2) 6857 printf ("%s: enabling clock multiplier\n", sym_name(np)); 6858 6859 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ 6860 /* 6861 * Wait for the LCKFRQ bit to be set if supported by the chip. 6862 * Otherwise wait 20 micro-seconds. 6863 */ 6864 if (np->features & FE_LCKFRQ) { 6865 int i = 20; 6866 while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) 6867 UDELAY (20); 6868 if (!i) 6869 printf("%s: the chip cannot lock the frequency\n", 6870 sym_name(np)); 6871 } else 6872 UDELAY (20); 6873 OUTB(nc_stest3, HSC); /* Halt the scsi clock */ 6874 OUTB(nc_scntl3, scntl3); 6875 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ 6876 OUTB(nc_stest3, 0x00); /* Restart scsi clock */ 6877 } 6878 6879 /* 6880 * calculate SCSI clock frequency (in KHz) 6881 */ 6882 static unsigned getfreq (hcb_p np, int gen) 6883 { 6884 unsigned int ms = 0; 6885 unsigned int f; 6886 6887 /* 6888 * Measure GEN timer delay in order 6889 * to calculate SCSI clock frequency 6890 * 6891 * This code will never execute too 6892 * many loop iterations (if DELAY is 6893 * reasonably correct). It could get 6894 * too low a delay (too high a freq.) 6895 * if the CPU is slow executing the 6896 * loop for some reason (an NMI, for 6897 * example). For this reason we will 6898 * if multiple measurements are to be 6899 * performed trust the higher delay 6900 * (lower frequency returned). 6901 */ 6902 OUTW (nc_sien , 0); /* mask all scsi interrupts */ 6903 (void) INW (nc_sist); /* clear pending scsi interrupt */ 6904 OUTB (nc_dien , 0); /* mask all dma interrupts */ 6905 (void) INW (nc_sist); /* another one, just to be sure :) */ 6906 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ 6907 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6908 OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */ 6909 while (!(INW(nc_sist) & GEN) && ms++ < 100000) 6910 UDELAY (1000); /* count ms */ 6911 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6912 /* 6913 * set prescaler to divide by whatever 0 means 6914 * 0 ought to choose divide by 2, but appears 6915 * to set divide by 3.5 mode in my 53c810 ... 6916 */ 6917 OUTB (nc_scntl3, 0); 6918 6919 /* 6920 * adjust for prescaler, and convert into KHz 6921 */ 6922 f = ms ? ((1 << gen) * 4340) / ms : 0; 6923 6924 if (sym_verbose >= 2) 6925 printf ("%s: Delay (GEN=%d): %u msec, %u KHz\n", 6926 sym_name(np), gen, ms, f); 6927 6928 return f; 6929 } 6930 6931 static unsigned sym_getfreq (hcb_p np) 6932 { 6933 u_int f1, f2; 6934 int gen = 11; 6935 6936 (void) getfreq (np, gen); /* throw away first result */ 6937 f1 = getfreq (np, gen); 6938 f2 = getfreq (np, gen); 6939 if (f1 > f2) f1 = f2; /* trust lower result */ 6940 return f1; 6941 } 6942 6943 /* 6944 * Get/probe chip SCSI clock frequency 6945 */ 6946 static void sym_getclock (hcb_p np, int mult) 6947 { 6948 unsigned char scntl3 = np->sv_scntl3; 6949 unsigned char stest1 = np->sv_stest1; 6950 unsigned f1; 6951 6952 /* 6953 * For the C10 core, assume 40 MHz. 6954 */ 6955 if (np->features & FE_C10) { 6956 np->multiplier = mult; 6957 np->clock_khz = 40000 * mult; 6958 return; 6959 } 6960 6961 np->multiplier = 1; 6962 f1 = 40000; 6963 /* 6964 * True with 875/895/896/895A with clock multiplier selected 6965 */ 6966 if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) { 6967 if (sym_verbose >= 2) 6968 printf ("%s: clock multiplier found\n", sym_name(np)); 6969 np->multiplier = mult; 6970 } 6971 6972 /* 6973 * If multiplier not found or scntl3 not 7,5,3, 6974 * reset chip and get frequency from general purpose timer. 6975 * Otherwise trust scntl3 BIOS setting. 6976 */ 6977 if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) { 6978 OUTB (nc_stest1, 0); /* make sure doubler is OFF */ 6979 f1 = sym_getfreq (np); 6980 6981 if (sym_verbose) 6982 printf ("%s: chip clock is %uKHz\n", sym_name(np), f1); 6983 6984 if (f1 < 45000) f1 = 40000; 6985 else if (f1 < 55000) f1 = 50000; 6986 else f1 = 80000; 6987 6988 if (f1 < 80000 && mult > 1) { 6989 if (sym_verbose >= 2) 6990 printf ("%s: clock multiplier assumed\n", 6991 sym_name(np)); 6992 np->multiplier = mult; 6993 } 6994 } else { 6995 if ((scntl3 & 7) == 3) f1 = 40000; 6996 else if ((scntl3 & 7) == 5) f1 = 80000; 6997 else f1 = 160000; 6998 6999 f1 /= np->multiplier; 7000 } 7001 7002 /* 7003 * Compute controller synchronous parameters. 7004 */ 7005 f1 *= np->multiplier; 7006 np->clock_khz = f1; 7007 } 7008 7009 /* 7010 * Get/probe PCI clock frequency 7011 */ 7012 static int sym_getpciclock (hcb_p np) 7013 { 7014 int f = 0; 7015 7016 /* 7017 * For the C1010-33, this doesn't work. 7018 * For the C1010-66, this will be tested when I'll have 7019 * such a beast to play with. 7020 */ 7021 if (!(np->features & FE_C10)) { 7022 OUTB (nc_stest1, SCLK); /* Use the PCI clock as SCSI clock */ 7023 f = (int) sym_getfreq (np); 7024 OUTB (nc_stest1, 0); 7025 } 7026 np->pciclk_khz = f; 7027 7028 return f; 7029 } 7030 7031 /*============= DRIVER ACTION/COMPLETION ====================*/ 7032 7033 /* 7034 * Print something that tells about extended errors. 7035 */ 7036 static void sym_print_xerr(ccb_p cp, int x_status) 7037 { 7038 if (x_status & XE_PARITY_ERR) { 7039 PRINT_ADDR(cp); 7040 printf ("unrecovered SCSI parity error.\n"); 7041 } 7042 if (x_status & XE_EXTRA_DATA) { 7043 PRINT_ADDR(cp); 7044 printf ("extraneous data discarded.\n"); 7045 } 7046 if (x_status & XE_BAD_PHASE) { 7047 PRINT_ADDR(cp); 7048 printf ("illegal scsi phase (4/5).\n"); 7049 } 7050 if (x_status & XE_SODL_UNRUN) { 7051 PRINT_ADDR(cp); 7052 printf ("ODD transfer in DATA OUT phase.\n"); 7053 } 7054 if (x_status & XE_SWIDE_OVRUN) { 7055 PRINT_ADDR(cp); 7056 printf ("ODD transfer in DATA IN phase.\n"); 7057 } 7058 } 7059 7060 /* 7061 * Choose the more appropriate CAM status if 7062 * the IO encountered an extended error. 7063 */ 7064 static int sym_xerr_cam_status(int cam_status, int x_status) 7065 { 7066 if (x_status) { 7067 if (x_status & XE_PARITY_ERR) 7068 cam_status = CAM_UNCOR_PARITY; 7069 else if (x_status &(XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) 7070 cam_status = CAM_DATA_RUN_ERR; 7071 else if (x_status & XE_BAD_PHASE) 7072 cam_status = CAM_REQ_CMP_ERR; 7073 else 7074 cam_status = CAM_REQ_CMP_ERR; 7075 } 7076 return cam_status; 7077 } 7078 7079 /* 7080 * Complete execution of a SCSI command with extented 7081 * error, SCSI status error, or having been auto-sensed. 7082 * 7083 * The SCRIPTS processor is not running there, so we 7084 * can safely access IO registers and remove JOBs from 7085 * the START queue. 7086 * SCRATCHA is assumed to have been loaded with STARTPOS 7087 * before the SCRIPTS called the C code. 7088 */ 7089 static void sym_complete_error (hcb_p np, ccb_p cp) 7090 { 7091 struct ccb_scsiio *csio; 7092 u_int cam_status; 7093 int i, sense_returned; 7094 7095 SYM_LOCK_ASSERT(MA_OWNED); 7096 7097 /* 7098 * Paranoid check. :) 7099 */ 7100 if (!cp || !cp->cam_ccb) 7101 return; 7102 7103 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_RESULT)) { 7104 printf ("CCB=%lx STAT=%x/%x/%x DEV=%d/%d\n", (unsigned long)cp, 7105 cp->host_status, cp->ssss_status, cp->host_flags, 7106 cp->target, cp->lun); 7107 MDELAY(100); 7108 } 7109 7110 /* 7111 * Get CAM command pointer. 7112 */ 7113 csio = &cp->cam_ccb->csio; 7114 7115 /* 7116 * Check for extended errors. 7117 */ 7118 if (cp->xerr_status) { 7119 if (sym_verbose) 7120 sym_print_xerr(cp, cp->xerr_status); 7121 if (cp->host_status == HS_COMPLETE) 7122 cp->host_status = HS_COMP_ERR; 7123 } 7124 7125 /* 7126 * Calculate the residual. 7127 */ 7128 csio->sense_resid = 0; 7129 csio->resid = sym_compute_residual(np, cp); 7130 7131 if (!SYM_CONF_RESIDUAL_SUPPORT) {/* If user does not want residuals */ 7132 csio->resid = 0; /* throw them away. :) */ 7133 cp->sv_resid = 0; 7134 } 7135 7136 if (cp->host_flags & HF_SENSE) { /* Auto sense */ 7137 csio->scsi_status = cp->sv_scsi_status; /* Restore status */ 7138 csio->sense_resid = csio->resid; /* Swap residuals */ 7139 csio->resid = cp->sv_resid; 7140 cp->sv_resid = 0; 7141 if (sym_verbose && cp->sv_xerr_status) 7142 sym_print_xerr(cp, cp->sv_xerr_status); 7143 if (cp->host_status == HS_COMPLETE && 7144 cp->ssss_status == S_GOOD && 7145 cp->xerr_status == 0) { 7146 cam_status = sym_xerr_cam_status(CAM_SCSI_STATUS_ERROR, 7147 cp->sv_xerr_status); 7148 cam_status |= CAM_AUTOSNS_VALID; 7149 /* 7150 * Bounce back the sense data to user and 7151 * fix the residual. 7152 */ 7153 bzero(&csio->sense_data, sizeof(csio->sense_data)); 7154 sense_returned = SYM_SNS_BBUF_LEN - csio->sense_resid; 7155 if (sense_returned < csio->sense_len) 7156 csio->sense_resid = csio->sense_len - 7157 sense_returned; 7158 else 7159 csio->sense_resid = 0; 7160 bcopy(cp->sns_bbuf, &csio->sense_data, 7161 MIN(csio->sense_len, sense_returned)); 7162 #if 0 7163 /* 7164 * If the device reports a UNIT ATTENTION condition 7165 * due to a RESET condition, we should consider all 7166 * disconnect CCBs for this unit as aborted. 7167 */ 7168 if (1) { 7169 u_char *p; 7170 p = (u_char *) csio->sense_data; 7171 if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29) 7172 sym_clear_tasks(np, CAM_REQ_ABORTED, 7173 cp->target,cp->lun, -1); 7174 } 7175 #endif 7176 } 7177 else 7178 cam_status = CAM_AUTOSENSE_FAIL; 7179 } 7180 else if (cp->host_status == HS_COMPLETE) { /* Bad SCSI status */ 7181 csio->scsi_status = cp->ssss_status; 7182 cam_status = CAM_SCSI_STATUS_ERROR; 7183 } 7184 else if (cp->host_status == HS_SEL_TIMEOUT) /* Selection timeout */ 7185 cam_status = CAM_SEL_TIMEOUT; 7186 else if (cp->host_status == HS_UNEXPECTED) /* Unexpected BUS FREE*/ 7187 cam_status = CAM_UNEXP_BUSFREE; 7188 else { /* Extended error */ 7189 if (sym_verbose) { 7190 PRINT_ADDR(cp); 7191 printf ("COMMAND FAILED (%x %x %x).\n", 7192 cp->host_status, cp->ssss_status, 7193 cp->xerr_status); 7194 } 7195 csio->scsi_status = cp->ssss_status; 7196 /* 7197 * Set the most appropriate value for CAM status. 7198 */ 7199 cam_status = sym_xerr_cam_status(CAM_REQ_CMP_ERR, 7200 cp->xerr_status); 7201 } 7202 7203 /* 7204 * Dequeue all queued CCBs for that device 7205 * not yet started by SCRIPTS. 7206 */ 7207 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 7208 (void) sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 7209 7210 /* 7211 * Restart the SCRIPTS processor. 7212 */ 7213 OUTL_DSP (SCRIPTA_BA (np, start)); 7214 7215 /* 7216 * Synchronize DMA map if needed. 7217 */ 7218 if (cp->dmamapped) { 7219 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7220 (cp->dmamapped == SYM_DMA_READ ? 7221 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)); 7222 } 7223 /* 7224 * Add this one to the COMP queue. 7225 * Complete all those commands with either error 7226 * or requeue condition. 7227 */ 7228 sym_set_cam_status((union ccb *) csio, cam_status); 7229 sym_remque(&cp->link_ccbq); 7230 sym_insque_head(&cp->link_ccbq, &np->comp_ccbq); 7231 sym_flush_comp_queue(np, 0); 7232 } 7233 7234 /* 7235 * Complete execution of a successful SCSI command. 7236 * 7237 * Only successful commands go to the DONE queue, 7238 * since we need to have the SCRIPTS processor 7239 * stopped on any error condition. 7240 * The SCRIPTS processor is running while we are 7241 * completing successful commands. 7242 */ 7243 static void sym_complete_ok (hcb_p np, ccb_p cp) 7244 { 7245 struct ccb_scsiio *csio; 7246 tcb_p tp; 7247 lcb_p lp; 7248 7249 SYM_LOCK_ASSERT(MA_OWNED); 7250 7251 /* 7252 * Paranoid check. :) 7253 */ 7254 if (!cp || !cp->cam_ccb) 7255 return; 7256 assert (cp->host_status == HS_COMPLETE); 7257 7258 /* 7259 * Get command, target and lun pointers. 7260 */ 7261 csio = &cp->cam_ccb->csio; 7262 tp = &np->target[cp->target]; 7263 lp = sym_lp(tp, cp->lun); 7264 7265 /* 7266 * Assume device discovered on first success. 7267 */ 7268 if (!lp) 7269 sym_set_bit(tp->lun_map, cp->lun); 7270 7271 /* 7272 * If all data have been transferred, given than no 7273 * extended error did occur, there is no residual. 7274 */ 7275 csio->resid = 0; 7276 if (cp->phys.head.lastp != cp->phys.head.goalp) 7277 csio->resid = sym_compute_residual(np, cp); 7278 7279 /* 7280 * Wrong transfer residuals may be worse than just always 7281 * returning zero. User can disable this feature from 7282 * sym_conf.h. Residual support is enabled by default. 7283 */ 7284 if (!SYM_CONF_RESIDUAL_SUPPORT) 7285 csio->resid = 0; 7286 7287 /* 7288 * Synchronize DMA map if needed. 7289 */ 7290 if (cp->dmamapped) { 7291 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7292 (cp->dmamapped == SYM_DMA_READ ? 7293 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)); 7294 } 7295 /* 7296 * Set status and complete the command. 7297 */ 7298 csio->scsi_status = cp->ssss_status; 7299 sym_set_cam_status((union ccb *) csio, CAM_REQ_CMP); 7300 sym_xpt_done(np, (union ccb *) csio, cp); 7301 sym_free_ccb(np, cp); 7302 } 7303 7304 /* 7305 * Our callout handler 7306 */ 7307 static void sym_callout(void *arg) 7308 { 7309 union ccb *ccb = (union ccb *) arg; 7310 hcb_p np = ccb->ccb_h.sym_hcb_ptr; 7311 7312 /* 7313 * Check that the CAM CCB is still queued. 7314 */ 7315 if (!np) 7316 return; 7317 7318 SYM_LOCK(); 7319 7320 switch(ccb->ccb_h.func_code) { 7321 case XPT_SCSI_IO: 7322 (void) sym_abort_scsiio(np, ccb, 1); 7323 break; 7324 default: 7325 break; 7326 } 7327 7328 SYM_UNLOCK(); 7329 } 7330 7331 /* 7332 * Abort an SCSI IO. 7333 */ 7334 static int sym_abort_scsiio(hcb_p np, union ccb *ccb, int timed_out) 7335 { 7336 ccb_p cp; 7337 SYM_QUEHEAD *qp; 7338 7339 SYM_LOCK_ASSERT(MA_OWNED); 7340 7341 /* 7342 * Look up our CCB control block. 7343 */ 7344 cp = NULL; 7345 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 7346 ccb_p cp2 = sym_que_entry(qp, struct sym_ccb, link_ccbq); 7347 if (cp2->cam_ccb == ccb) { 7348 cp = cp2; 7349 break; 7350 } 7351 } 7352 if (!cp || cp->host_status == HS_WAIT) 7353 return -1; 7354 7355 /* 7356 * If a previous abort didn't succeed in time, 7357 * perform a BUS reset. 7358 */ 7359 if (cp->to_abort) { 7360 sym_reset_scsi_bus(np, 1); 7361 return 0; 7362 } 7363 7364 /* 7365 * Mark the CCB for abort and allow time for. 7366 */ 7367 cp->to_abort = timed_out ? 2 : 1; 7368 callout_reset(&cp->ch, 10 * hz, sym_callout, (caddr_t) ccb); 7369 7370 /* 7371 * Tell the SCRIPTS processor to stop and synchronize with us. 7372 */ 7373 np->istat_sem = SEM; 7374 OUTB (nc_istat, SIGP|SEM); 7375 return 0; 7376 } 7377 7378 /* 7379 * Reset a SCSI device (all LUNs of a target). 7380 */ 7381 static void sym_reset_dev(hcb_p np, union ccb *ccb) 7382 { 7383 tcb_p tp; 7384 struct ccb_hdr *ccb_h = &ccb->ccb_h; 7385 7386 SYM_LOCK_ASSERT(MA_OWNED); 7387 7388 if (ccb_h->target_id == np->myaddr || 7389 ccb_h->target_id >= SYM_CONF_MAX_TARGET || 7390 ccb_h->target_lun >= SYM_CONF_MAX_LUN) { 7391 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7392 return; 7393 } 7394 7395 tp = &np->target[ccb_h->target_id]; 7396 7397 tp->to_reset = 1; 7398 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 7399 7400 np->istat_sem = SEM; 7401 OUTB (nc_istat, SIGP|SEM); 7402 } 7403 7404 /* 7405 * SIM action entry point. 7406 */ 7407 static void sym_action(struct cam_sim *sim, union ccb *ccb) 7408 { 7409 hcb_p np; 7410 tcb_p tp; 7411 lcb_p lp; 7412 ccb_p cp; 7413 int tmp; 7414 u_char idmsg, *msgptr; 7415 u_int msglen; 7416 struct ccb_scsiio *csio; 7417 struct ccb_hdr *ccb_h; 7418 7419 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("sym_action\n")); 7420 7421 /* 7422 * Retrieve our controller data structure. 7423 */ 7424 np = (hcb_p) cam_sim_softc(sim); 7425 7426 SYM_LOCK_ASSERT(MA_OWNED); 7427 7428 /* 7429 * The common case is SCSI IO. 7430 * We deal with other ones elsewhere. 7431 */ 7432 if (ccb->ccb_h.func_code != XPT_SCSI_IO) { 7433 sym_action2(sim, ccb); 7434 return; 7435 } 7436 csio = &ccb->csio; 7437 ccb_h = &csio->ccb_h; 7438 7439 /* 7440 * Work around races. 7441 */ 7442 if ((ccb_h->status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 7443 xpt_done(ccb); 7444 return; 7445 } 7446 7447 /* 7448 * Minimal checkings, so that we will not 7449 * go outside our tables. 7450 */ 7451 if (ccb_h->target_id == np->myaddr || 7452 ccb_h->target_id >= SYM_CONF_MAX_TARGET || 7453 ccb_h->target_lun >= SYM_CONF_MAX_LUN) { 7454 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7455 return; 7456 } 7457 7458 /* 7459 * Retrieve the target and lun descriptors. 7460 */ 7461 tp = &np->target[ccb_h->target_id]; 7462 lp = sym_lp(tp, ccb_h->target_lun); 7463 7464 /* 7465 * Complete the 1st INQUIRY command with error 7466 * condition if the device is flagged NOSCAN 7467 * at BOOT in the NVRAM. This may speed up 7468 * the boot and maintain coherency with BIOS 7469 * device numbering. Clearing the flag allows 7470 * user to rescan skipped devices later. 7471 * We also return error for devices not flagged 7472 * for SCAN LUNS in the NVRAM since some mono-lun 7473 * devices behave badly when asked for some non 7474 * zero LUN. Btw, this is an absolute hack.:-) 7475 */ 7476 if (!(ccb_h->flags & CAM_CDB_PHYS) && 7477 (0x12 == ((ccb_h->flags & CAM_CDB_POINTER) ? 7478 csio->cdb_io.cdb_ptr[0] : csio->cdb_io.cdb_bytes[0]))) { 7479 if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) || 7480 ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && 7481 ccb_h->target_lun != 0)) { 7482 tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; 7483 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7484 return; 7485 } 7486 } 7487 7488 /* 7489 * Get a control block for this IO. 7490 */ 7491 tmp = ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0); 7492 cp = sym_get_ccb(np, ccb_h->target_id, ccb_h->target_lun, tmp); 7493 if (!cp) { 7494 sym_xpt_done2(np, ccb, CAM_RESRC_UNAVAIL); 7495 return; 7496 } 7497 7498 /* 7499 * Keep track of the IO in our CCB. 7500 */ 7501 cp->cam_ccb = ccb; 7502 7503 /* 7504 * Build the IDENTIFY message. 7505 */ 7506 idmsg = M_IDENTIFY | cp->lun; 7507 if (cp->tag != NO_TAG || (lp && (lp->current_flags & SYM_DISC_ENABLED))) 7508 idmsg |= 0x40; 7509 7510 msgptr = cp->scsi_smsg; 7511 msglen = 0; 7512 msgptr[msglen++] = idmsg; 7513 7514 /* 7515 * Build the tag message if present. 7516 */ 7517 if (cp->tag != NO_TAG) { 7518 u_char order = csio->tag_action; 7519 7520 switch(order) { 7521 case M_ORDERED_TAG: 7522 break; 7523 case M_HEAD_TAG: 7524 break; 7525 default: 7526 order = M_SIMPLE_TAG; 7527 } 7528 msgptr[msglen++] = order; 7529 7530 /* 7531 * For less than 128 tags, actual tags are numbered 7532 * 1,3,5,..2*MAXTAGS+1,since we may have to deal 7533 * with devices that have problems with #TAG 0 or too 7534 * great #TAG numbers. For more tags (up to 256), 7535 * we use directly our tag number. 7536 */ 7537 #if SYM_CONF_MAX_TASK > (512/4) 7538 msgptr[msglen++] = cp->tag; 7539 #else 7540 msgptr[msglen++] = (cp->tag << 1) + 1; 7541 #endif 7542 } 7543 7544 /* 7545 * Build a negotiation message if needed. 7546 * (nego_status is filled by sym_prepare_nego()) 7547 */ 7548 cp->nego_status = 0; 7549 if (tp->tinfo.current.width != tp->tinfo.goal.width || 7550 tp->tinfo.current.period != tp->tinfo.goal.period || 7551 tp->tinfo.current.offset != tp->tinfo.goal.offset || 7552 tp->tinfo.current.options != tp->tinfo.goal.options) { 7553 if (!tp->nego_cp && lp) 7554 msglen += sym_prepare_nego(np, cp, 0, msgptr + msglen); 7555 } 7556 7557 /* 7558 * Fill in our ccb 7559 */ 7560 7561 /* 7562 * Startqueue 7563 */ 7564 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, select)); 7565 cp->phys.head.go.restart = cpu_to_scr(SCRIPTA_BA (np, resel_dsa)); 7566 7567 /* 7568 * select 7569 */ 7570 cp->phys.select.sel_id = cp->target; 7571 cp->phys.select.sel_scntl3 = tp->head.wval; 7572 cp->phys.select.sel_sxfer = tp->head.sval; 7573 cp->phys.select.sel_scntl4 = tp->head.uval; 7574 7575 /* 7576 * message 7577 */ 7578 cp->phys.smsg.addr = cpu_to_scr(CCB_BA (cp, scsi_smsg)); 7579 cp->phys.smsg.size = cpu_to_scr(msglen); 7580 7581 /* 7582 * command 7583 */ 7584 if (sym_setup_cdb(np, csio, cp) < 0) { 7585 sym_xpt_done(np, ccb, cp); 7586 sym_free_ccb(np, cp); 7587 return; 7588 } 7589 7590 /* 7591 * status 7592 */ 7593 #if 0 /* Provision */ 7594 cp->actualquirks = tp->quirks; 7595 #endif 7596 cp->actualquirks = SYM_QUIRK_AUTOSAVE; 7597 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 7598 cp->ssss_status = S_ILLEGAL; 7599 cp->xerr_status = 0; 7600 cp->host_flags = 0; 7601 cp->extra_bytes = 0; 7602 7603 /* 7604 * extreme data pointer. 7605 * shall be positive, so -1 is lower than lowest.:) 7606 */ 7607 cp->ext_sg = -1; 7608 cp->ext_ofs = 0; 7609 7610 /* 7611 * Build the data descriptor block 7612 * and start the IO. 7613 */ 7614 sym_setup_data_and_start(np, csio, cp); 7615 } 7616 7617 /* 7618 * Setup buffers and pointers that address the CDB. 7619 * I bet, physical CDBs will never be used on the planet, 7620 * since they can be bounced without significant overhead. 7621 */ 7622 static int sym_setup_cdb(hcb_p np, struct ccb_scsiio *csio, ccb_p cp) 7623 { 7624 struct ccb_hdr *ccb_h; 7625 u32 cmd_ba; 7626 int cmd_len; 7627 7628 SYM_LOCK_ASSERT(MA_OWNED); 7629 7630 ccb_h = &csio->ccb_h; 7631 7632 /* 7633 * CDB is 16 bytes max. 7634 */ 7635 if (csio->cdb_len > sizeof(cp->cdb_buf)) { 7636 sym_set_cam_status(cp->cam_ccb, CAM_REQ_INVALID); 7637 return -1; 7638 } 7639 cmd_len = csio->cdb_len; 7640 7641 if (ccb_h->flags & CAM_CDB_POINTER) { 7642 /* CDB is a pointer */ 7643 if (!(ccb_h->flags & CAM_CDB_PHYS)) { 7644 /* CDB pointer is virtual */ 7645 bcopy(csio->cdb_io.cdb_ptr, cp->cdb_buf, cmd_len); 7646 cmd_ba = CCB_BA (cp, cdb_buf[0]); 7647 } else { 7648 /* CDB pointer is physical */ 7649 #if 0 7650 cmd_ba = ((u32)csio->cdb_io.cdb_ptr) & 0xffffffff; 7651 #else 7652 sym_set_cam_status(cp->cam_ccb, CAM_REQ_INVALID); 7653 return -1; 7654 #endif 7655 } 7656 } else { 7657 /* CDB is in the CAM ccb (buffer) */ 7658 bcopy(csio->cdb_io.cdb_bytes, cp->cdb_buf, cmd_len); 7659 cmd_ba = CCB_BA (cp, cdb_buf[0]); 7660 } 7661 7662 cp->phys.cmd.addr = cpu_to_scr(cmd_ba); 7663 cp->phys.cmd.size = cpu_to_scr(cmd_len); 7664 7665 return 0; 7666 } 7667 7668 /* 7669 * Set up data pointers used by SCRIPTS. 7670 */ 7671 static void __inline 7672 sym_setup_data_pointers(hcb_p np, ccb_p cp, int dir) 7673 { 7674 u32 lastp, goalp; 7675 7676 SYM_LOCK_ASSERT(MA_OWNED); 7677 7678 /* 7679 * No segments means no data. 7680 */ 7681 if (!cp->segments) 7682 dir = CAM_DIR_NONE; 7683 7684 /* 7685 * Set the data pointer. 7686 */ 7687 switch(dir) { 7688 case CAM_DIR_OUT: 7689 goalp = SCRIPTA_BA (np, data_out2) + 8; 7690 lastp = goalp - 8 - (cp->segments * (2*4)); 7691 break; 7692 case CAM_DIR_IN: 7693 cp->host_flags |= HF_DATA_IN; 7694 goalp = SCRIPTA_BA (np, data_in2) + 8; 7695 lastp = goalp - 8 - (cp->segments * (2*4)); 7696 break; 7697 case CAM_DIR_NONE: 7698 default: 7699 lastp = goalp = SCRIPTB_BA (np, no_data); 7700 break; 7701 } 7702 7703 cp->phys.head.lastp = cpu_to_scr(lastp); 7704 cp->phys.head.goalp = cpu_to_scr(goalp); 7705 cp->phys.head.savep = cpu_to_scr(lastp); 7706 cp->startp = cp->phys.head.savep; 7707 } 7708 7709 /* 7710 * Call back routine for the DMA map service. 7711 * If bounce buffers are used (why ?), we may sleep and then 7712 * be called there in another context. 7713 */ 7714 static void 7715 sym_execute_ccb(void *arg, bus_dma_segment_t *psegs, int nsegs, int error) 7716 { 7717 ccb_p cp; 7718 hcb_p np; 7719 union ccb *ccb; 7720 7721 cp = (ccb_p) arg; 7722 ccb = cp->cam_ccb; 7723 np = (hcb_p) cp->arg; 7724 7725 SYM_LOCK_ASSERT(MA_OWNED); 7726 7727 /* 7728 * Deal with weird races. 7729 */ 7730 if (sym_get_cam_status(ccb) != CAM_REQ_INPROG) 7731 goto out_abort; 7732 7733 /* 7734 * Deal with weird errors. 7735 */ 7736 if (error) { 7737 cp->dmamapped = 0; 7738 sym_set_cam_status(cp->cam_ccb, CAM_REQ_ABORTED); 7739 goto out_abort; 7740 } 7741 7742 /* 7743 * Build the data descriptor for the chip. 7744 */ 7745 if (nsegs) { 7746 int retv; 7747 /* 896 rev 1 requires to be careful about boundaries */ 7748 if (np->device_id == PCI_ID_SYM53C896 && np->revision_id <= 1) 7749 retv = sym_scatter_sg_physical(np, cp, psegs, nsegs); 7750 else 7751 retv = sym_fast_scatter_sg_physical(np,cp, psegs,nsegs); 7752 if (retv < 0) { 7753 sym_set_cam_status(cp->cam_ccb, CAM_REQ_TOO_BIG); 7754 goto out_abort; 7755 } 7756 } 7757 7758 /* 7759 * Synchronize the DMA map only if we have 7760 * actually mapped the data. 7761 */ 7762 if (cp->dmamapped) { 7763 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7764 (cp->dmamapped == SYM_DMA_READ ? 7765 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 7766 } 7767 7768 /* 7769 * Set host status to busy state. 7770 * May have been set back to HS_WAIT to avoid a race. 7771 */ 7772 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 7773 7774 /* 7775 * Set data pointers. 7776 */ 7777 sym_setup_data_pointers(np, cp, (ccb->ccb_h.flags & CAM_DIR_MASK)); 7778 7779 /* 7780 * Enqueue this IO in our pending queue. 7781 */ 7782 sym_enqueue_cam_ccb(cp); 7783 7784 /* 7785 * When `#ifed 1', the code below makes the driver 7786 * panic on the first attempt to write to a SCSI device. 7787 * It is the first test we want to do after a driver 7788 * change that does not seem obviously safe. :) 7789 */ 7790 #if 0 7791 switch (cp->cdb_buf[0]) { 7792 case 0x0A: case 0x2A: case 0xAA: 7793 panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n"); 7794 MDELAY(10000); 7795 break; 7796 default: 7797 break; 7798 } 7799 #endif 7800 /* 7801 * Activate this job. 7802 */ 7803 sym_put_start_queue(np, cp); 7804 return; 7805 out_abort: 7806 sym_xpt_done(np, ccb, cp); 7807 sym_free_ccb(np, cp); 7808 } 7809 7810 /* 7811 * How complex it gets to deal with the data in CAM. 7812 * The Bus Dma stuff makes things still more complex. 7813 */ 7814 static void 7815 sym_setup_data_and_start(hcb_p np, struct ccb_scsiio *csio, ccb_p cp) 7816 { 7817 struct ccb_hdr *ccb_h; 7818 int dir, retv; 7819 7820 SYM_LOCK_ASSERT(MA_OWNED); 7821 7822 ccb_h = &csio->ccb_h; 7823 7824 /* 7825 * Now deal with the data. 7826 */ 7827 cp->data_len = csio->dxfer_len; 7828 cp->arg = np; 7829 7830 /* 7831 * No direction means no data. 7832 */ 7833 dir = (ccb_h->flags & CAM_DIR_MASK); 7834 if (dir == CAM_DIR_NONE) { 7835 sym_execute_ccb(cp, NULL, 0, 0); 7836 return; 7837 } 7838 7839 cp->dmamapped = (dir == CAM_DIR_IN) ? SYM_DMA_READ : SYM_DMA_WRITE; 7840 retv = bus_dmamap_load_ccb(np->data_dmat, cp->dmamap, 7841 (union ccb *)csio, sym_execute_ccb, cp, 0); 7842 if (retv == EINPROGRESS) { 7843 cp->host_status = HS_WAIT; 7844 xpt_freeze_simq(np->sim, 1); 7845 csio->ccb_h.status |= CAM_RELEASE_SIMQ; 7846 } 7847 } 7848 7849 /* 7850 * Move the scatter list to our data block. 7851 */ 7852 static int 7853 sym_fast_scatter_sg_physical(hcb_p np, ccb_p cp, 7854 bus_dma_segment_t *psegs, int nsegs) 7855 { 7856 struct sym_tblmove *data; 7857 bus_dma_segment_t *psegs2; 7858 7859 SYM_LOCK_ASSERT(MA_OWNED); 7860 7861 if (nsegs > SYM_CONF_MAX_SG) 7862 return -1; 7863 7864 data = &cp->phys.data[SYM_CONF_MAX_SG-1]; 7865 psegs2 = &psegs[nsegs-1]; 7866 cp->segments = nsegs; 7867 7868 while (1) { 7869 data->addr = cpu_to_scr(psegs2->ds_addr); 7870 data->size = cpu_to_scr(psegs2->ds_len); 7871 if (DEBUG_FLAGS & DEBUG_SCATTER) { 7872 printf ("%s scatter: paddr=%lx len=%ld\n", 7873 sym_name(np), (long) psegs2->ds_addr, 7874 (long) psegs2->ds_len); 7875 } 7876 if (psegs2 != psegs) { 7877 --data; 7878 --psegs2; 7879 continue; 7880 } 7881 break; 7882 } 7883 return 0; 7884 } 7885 7886 /* 7887 * Scatter a SG list with physical addresses into bus addressable chunks. 7888 */ 7889 static int 7890 sym_scatter_sg_physical(hcb_p np, ccb_p cp, bus_dma_segment_t *psegs, int nsegs) 7891 { 7892 u_long ps, pe, pn; 7893 u_long k; 7894 int s, t; 7895 7896 SYM_LOCK_ASSERT(MA_OWNED); 7897 7898 s = SYM_CONF_MAX_SG - 1; 7899 t = nsegs - 1; 7900 ps = psegs[t].ds_addr; 7901 pe = ps + psegs[t].ds_len; 7902 7903 while (s >= 0) { 7904 pn = (pe - 1) & ~(SYM_CONF_DMA_BOUNDARY - 1); 7905 if (pn <= ps) 7906 pn = ps; 7907 k = pe - pn; 7908 if (DEBUG_FLAGS & DEBUG_SCATTER) { 7909 printf ("%s scatter: paddr=%lx len=%ld\n", 7910 sym_name(np), pn, k); 7911 } 7912 cp->phys.data[s].addr = cpu_to_scr(pn); 7913 cp->phys.data[s].size = cpu_to_scr(k); 7914 --s; 7915 if (pn == ps) { 7916 if (--t < 0) 7917 break; 7918 ps = psegs[t].ds_addr; 7919 pe = ps + psegs[t].ds_len; 7920 } 7921 else 7922 pe = pn; 7923 } 7924 7925 cp->segments = SYM_CONF_MAX_SG - 1 - s; 7926 7927 return t >= 0 ? -1 : 0; 7928 } 7929 7930 /* 7931 * SIM action for non performance critical stuff. 7932 */ 7933 static void sym_action2(struct cam_sim *sim, union ccb *ccb) 7934 { 7935 union ccb *abort_ccb; 7936 struct ccb_hdr *ccb_h; 7937 struct ccb_pathinq *cpi; 7938 struct ccb_trans_settings *cts; 7939 struct sym_trans *tip; 7940 hcb_p np; 7941 tcb_p tp; 7942 lcb_p lp; 7943 u_char dflags; 7944 7945 /* 7946 * Retrieve our controller data structure. 7947 */ 7948 np = (hcb_p) cam_sim_softc(sim); 7949 7950 SYM_LOCK_ASSERT(MA_OWNED); 7951 7952 ccb_h = &ccb->ccb_h; 7953 7954 switch (ccb_h->func_code) { 7955 case XPT_SET_TRAN_SETTINGS: 7956 cts = &ccb->cts; 7957 tp = &np->target[ccb_h->target_id]; 7958 7959 /* 7960 * Update SPI transport settings in TARGET control block. 7961 * Update SCSI device settings in LUN control block. 7962 */ 7963 lp = sym_lp(tp, ccb_h->target_lun); 7964 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 7965 sym_update_trans(np, &tp->tinfo.goal, cts); 7966 if (lp) 7967 sym_update_dflags(np, &lp->current_flags, cts); 7968 } 7969 if (cts->type == CTS_TYPE_USER_SETTINGS) { 7970 sym_update_trans(np, &tp->tinfo.user, cts); 7971 if (lp) 7972 sym_update_dflags(np, &lp->user_flags, cts); 7973 } 7974 7975 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 7976 break; 7977 case XPT_GET_TRAN_SETTINGS: 7978 cts = &ccb->cts; 7979 tp = &np->target[ccb_h->target_id]; 7980 lp = sym_lp(tp, ccb_h->target_lun); 7981 7982 #define cts__scsi (&cts->proto_specific.scsi) 7983 #define cts__spi (&cts->xport_specific.spi) 7984 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 7985 tip = &tp->tinfo.current; 7986 dflags = lp ? lp->current_flags : 0; 7987 } 7988 else { 7989 tip = &tp->tinfo.user; 7990 dflags = lp ? lp->user_flags : tp->usrflags; 7991 } 7992 7993 cts->protocol = PROTO_SCSI; 7994 cts->transport = XPORT_SPI; 7995 cts->protocol_version = tip->scsi_version; 7996 cts->transport_version = tip->spi_version; 7997 7998 cts__spi->sync_period = tip->period; 7999 cts__spi->sync_offset = tip->offset; 8000 cts__spi->bus_width = tip->width; 8001 cts__spi->ppr_options = tip->options; 8002 8003 cts__spi->valid = CTS_SPI_VALID_SYNC_RATE 8004 | CTS_SPI_VALID_SYNC_OFFSET 8005 | CTS_SPI_VALID_BUS_WIDTH 8006 | CTS_SPI_VALID_PPR_OPTIONS; 8007 8008 cts__spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 8009 if (dflags & SYM_DISC_ENABLED) 8010 cts__spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 8011 cts__spi->valid |= CTS_SPI_VALID_DISC; 8012 8013 cts__scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 8014 if (dflags & SYM_TAGS_ENABLED) 8015 cts__scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 8016 cts__scsi->valid |= CTS_SCSI_VALID_TQ; 8017 #undef cts__spi 8018 #undef cts__scsi 8019 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8020 break; 8021 case XPT_CALC_GEOMETRY: 8022 cam_calc_geometry(&ccb->ccg, /*extended*/1); 8023 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8024 break; 8025 case XPT_PATH_INQ: 8026 cpi = &ccb->cpi; 8027 cpi->version_num = 1; 8028 cpi->hba_inquiry = PI_MDP_ABLE|PI_SDTR_ABLE|PI_TAG_ABLE; 8029 if ((np->features & FE_WIDE) != 0) 8030 cpi->hba_inquiry |= PI_WIDE_16; 8031 cpi->target_sprt = 0; 8032 cpi->hba_misc = PIM_UNMAPPED; 8033 if (np->usrflags & SYM_SCAN_TARGETS_HILO) 8034 cpi->hba_misc |= PIM_SCANHILO; 8035 if (np->usrflags & SYM_AVOID_BUS_RESET) 8036 cpi->hba_misc |= PIM_NOBUSRESET; 8037 cpi->hba_eng_cnt = 0; 8038 cpi->max_target = (np->features & FE_WIDE) ? 15 : 7; 8039 /* Semantic problem:)LUN number max = max number of LUNs - 1 */ 8040 cpi->max_lun = SYM_CONF_MAX_LUN-1; 8041 if (SYM_SETUP_MAX_LUN < SYM_CONF_MAX_LUN) 8042 cpi->max_lun = SYM_SETUP_MAX_LUN-1; 8043 cpi->bus_id = cam_sim_bus(sim); 8044 cpi->initiator_id = np->myaddr; 8045 cpi->base_transfer_speed = 3300; 8046 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 8047 strncpy(cpi->hba_vid, "Symbios", HBA_IDLEN); 8048 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 8049 cpi->unit_number = cam_sim_unit(sim); 8050 8051 cpi->protocol = PROTO_SCSI; 8052 cpi->protocol_version = SCSI_REV_2; 8053 cpi->transport = XPORT_SPI; 8054 cpi->transport_version = 2; 8055 cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_ST; 8056 if (np->features & FE_ULTRA3) { 8057 cpi->transport_version = 3; 8058 cpi->xport_specific.spi.ppr_options = 8059 SID_SPI_CLOCK_DT_ST; 8060 } 8061 cpi->maxio = SYM_CONF_MAX_SG * PAGE_SIZE; 8062 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8063 break; 8064 case XPT_ABORT: 8065 abort_ccb = ccb->cab.abort_ccb; 8066 switch(abort_ccb->ccb_h.func_code) { 8067 case XPT_SCSI_IO: 8068 if (sym_abort_scsiio(np, abort_ccb, 0) == 0) { 8069 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8070 break; 8071 } 8072 default: 8073 sym_xpt_done2(np, ccb, CAM_UA_ABORT); 8074 break; 8075 } 8076 break; 8077 case XPT_RESET_DEV: 8078 sym_reset_dev(np, ccb); 8079 break; 8080 case XPT_RESET_BUS: 8081 sym_reset_scsi_bus(np, 0); 8082 if (sym_verbose) { 8083 xpt_print_path(np->path); 8084 printf("SCSI BUS reset delivered.\n"); 8085 } 8086 sym_init (np, 1); 8087 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8088 break; 8089 case XPT_ACCEPT_TARGET_IO: 8090 case XPT_CONT_TARGET_IO: 8091 case XPT_EN_LUN: 8092 case XPT_NOTIFY_ACK: 8093 case XPT_IMMED_NOTIFY: 8094 case XPT_TERM_IO: 8095 default: 8096 sym_xpt_done2(np, ccb, CAM_REQ_INVALID); 8097 break; 8098 } 8099 } 8100 8101 /* 8102 * Asynchronous notification handler. 8103 */ 8104 static void 8105 sym_async(void *cb_arg, u32 code, struct cam_path *path, void *args __unused) 8106 { 8107 hcb_p np; 8108 struct cam_sim *sim; 8109 u_int tn; 8110 tcb_p tp; 8111 8112 sim = (struct cam_sim *) cb_arg; 8113 np = (hcb_p) cam_sim_softc(sim); 8114 8115 SYM_LOCK_ASSERT(MA_OWNED); 8116 8117 switch (code) { 8118 case AC_LOST_DEVICE: 8119 tn = xpt_path_target_id(path); 8120 if (tn >= SYM_CONF_MAX_TARGET) 8121 break; 8122 8123 tp = &np->target[tn]; 8124 8125 tp->to_reset = 0; 8126 tp->head.sval = 0; 8127 tp->head.wval = np->rv_scntl3; 8128 tp->head.uval = 0; 8129 8130 tp->tinfo.current.period = tp->tinfo.goal.period = 0; 8131 tp->tinfo.current.offset = tp->tinfo.goal.offset = 0; 8132 tp->tinfo.current.width = tp->tinfo.goal.width = BUS_8_BIT; 8133 tp->tinfo.current.options = tp->tinfo.goal.options = 0; 8134 8135 break; 8136 default: 8137 break; 8138 } 8139 } 8140 8141 /* 8142 * Update transfer settings of a target. 8143 */ 8144 static void sym_update_trans(hcb_p np, struct sym_trans *tip, 8145 struct ccb_trans_settings *cts) 8146 { 8147 8148 SYM_LOCK_ASSERT(MA_OWNED); 8149 8150 /* 8151 * Update the infos. 8152 */ 8153 #define cts__spi (&cts->xport_specific.spi) 8154 if ((cts__spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) 8155 tip->width = cts__spi->bus_width; 8156 if ((cts__spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) 8157 tip->offset = cts__spi->sync_offset; 8158 if ((cts__spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 8159 tip->period = cts__spi->sync_period; 8160 if ((cts__spi->valid & CTS_SPI_VALID_PPR_OPTIONS) != 0) 8161 tip->options = (cts__spi->ppr_options & PPR_OPT_DT); 8162 if (cts->protocol_version != PROTO_VERSION_UNSPECIFIED && 8163 cts->protocol_version != PROTO_VERSION_UNKNOWN) 8164 tip->scsi_version = cts->protocol_version; 8165 if (cts->transport_version != XPORT_VERSION_UNSPECIFIED && 8166 cts->transport_version != XPORT_VERSION_UNKNOWN) 8167 tip->spi_version = cts->transport_version; 8168 #undef cts__spi 8169 /* 8170 * Scale against driver configuration limits. 8171 */ 8172 if (tip->width > SYM_SETUP_MAX_WIDE) tip->width = SYM_SETUP_MAX_WIDE; 8173 if (tip->period && tip->offset) { 8174 if (tip->offset > SYM_SETUP_MAX_OFFS) tip->offset = SYM_SETUP_MAX_OFFS; 8175 if (tip->period < SYM_SETUP_MIN_SYNC) tip->period = SYM_SETUP_MIN_SYNC; 8176 } else { 8177 tip->offset = 0; 8178 tip->period = 0; 8179 } 8180 8181 /* 8182 * Scale against actual controller BUS width. 8183 */ 8184 if (tip->width > np->maxwide) 8185 tip->width = np->maxwide; 8186 8187 /* 8188 * Only accept DT if controller supports and SYNC/WIDE asked. 8189 */ 8190 if (!((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) || 8191 !(tip->width == BUS_16_BIT && tip->offset)) { 8192 tip->options &= ~PPR_OPT_DT; 8193 } 8194 8195 /* 8196 * Scale period factor and offset against controller limits. 8197 */ 8198 if (tip->offset && tip->period) { 8199 if (tip->options & PPR_OPT_DT) { 8200 if (tip->period < np->minsync_dt) 8201 tip->period = np->minsync_dt; 8202 if (tip->period > np->maxsync_dt) 8203 tip->period = np->maxsync_dt; 8204 if (tip->offset > np->maxoffs_dt) 8205 tip->offset = np->maxoffs_dt; 8206 } 8207 else { 8208 if (tip->period < np->minsync) 8209 tip->period = np->minsync; 8210 if (tip->period > np->maxsync) 8211 tip->period = np->maxsync; 8212 if (tip->offset > np->maxoffs) 8213 tip->offset = np->maxoffs; 8214 } 8215 } 8216 } 8217 8218 /* 8219 * Update flags for a device (logical unit). 8220 */ 8221 static void 8222 sym_update_dflags(hcb_p np, u_char *flags, struct ccb_trans_settings *cts) 8223 { 8224 8225 SYM_LOCK_ASSERT(MA_OWNED); 8226 8227 #define cts__scsi (&cts->proto_specific.scsi) 8228 #define cts__spi (&cts->xport_specific.spi) 8229 if ((cts__spi->valid & CTS_SPI_VALID_DISC) != 0) { 8230 if ((cts__spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 8231 *flags |= SYM_DISC_ENABLED; 8232 else 8233 *flags &= ~SYM_DISC_ENABLED; 8234 } 8235 8236 if ((cts__scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 8237 if ((cts__scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 8238 *flags |= SYM_TAGS_ENABLED; 8239 else 8240 *flags &= ~SYM_TAGS_ENABLED; 8241 } 8242 #undef cts__spi 8243 #undef cts__scsi 8244 } 8245 8246 /*============= DRIVER INITIALISATION ==================*/ 8247 8248 static device_method_t sym_pci_methods[] = { 8249 DEVMETHOD(device_probe, sym_pci_probe), 8250 DEVMETHOD(device_attach, sym_pci_attach), 8251 DEVMETHOD_END 8252 }; 8253 8254 static driver_t sym_pci_driver = { 8255 "sym", 8256 sym_pci_methods, 8257 1 /* no softc */ 8258 }; 8259 8260 static devclass_t sym_devclass; 8261 8262 DRIVER_MODULE(sym, pci, sym_pci_driver, sym_devclass, NULL, NULL); 8263 MODULE_DEPEND(sym, cam, 1, 1, 1); 8264 MODULE_DEPEND(sym, pci, 1, 1, 1); 8265 8266 static const struct sym_pci_chip sym_pci_dev_table[] = { 8267 {PCI_ID_SYM53C810, 0x0f, "810", 4, 8, 4, 64, 8268 FE_ERL} 8269 , 8270 #ifdef SYM_DEBUG_GENERIC_SUPPORT 8271 {PCI_ID_SYM53C810, 0xff, "810a", 4, 8, 4, 1, 8272 FE_BOF} 8273 , 8274 #else 8275 {PCI_ID_SYM53C810, 0xff, "810a", 4, 8, 4, 1, 8276 FE_CACHE_SET|FE_LDSTR|FE_PFEN|FE_BOF} 8277 , 8278 #endif 8279 {PCI_ID_SYM53C815, 0xff, "815", 4, 8, 4, 64, 8280 FE_BOF|FE_ERL} 8281 , 8282 {PCI_ID_SYM53C825, 0x0f, "825", 6, 8, 4, 64, 8283 FE_WIDE|FE_BOF|FE_ERL|FE_DIFF} 8284 , 8285 {PCI_ID_SYM53C825, 0xff, "825a", 6, 8, 4, 2, 8286 FE_WIDE|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM|FE_DIFF} 8287 , 8288 {PCI_ID_SYM53C860, 0xff, "860", 4, 8, 5, 1, 8289 FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN} 8290 , 8291 {PCI_ID_SYM53C875, 0x01, "875", 6, 16, 5, 2, 8292 FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8293 FE_RAM|FE_DIFF} 8294 , 8295 {PCI_ID_SYM53C875, 0xff, "875", 6, 16, 5, 2, 8296 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8297 FE_RAM|FE_DIFF} 8298 , 8299 {PCI_ID_SYM53C875_2, 0xff, "875", 6, 16, 5, 2, 8300 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8301 FE_RAM|FE_DIFF} 8302 , 8303 {PCI_ID_SYM53C885, 0xff, "885", 6, 16, 5, 2, 8304 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8305 FE_RAM|FE_DIFF} 8306 , 8307 #ifdef SYM_DEBUG_GENERIC_SUPPORT 8308 {PCI_ID_SYM53C895, 0xff, "895", 6, 31, 7, 2, 8309 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS| 8310 FE_RAM|FE_LCKFRQ} 8311 , 8312 #else 8313 {PCI_ID_SYM53C895, 0xff, "895", 6, 31, 7, 2, 8314 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8315 FE_RAM|FE_LCKFRQ} 8316 , 8317 #endif 8318 {PCI_ID_SYM53C896, 0xff, "896", 6, 31, 7, 4, 8319 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8320 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ} 8321 , 8322 {PCI_ID_SYM53C895A, 0xff, "895a", 6, 31, 7, 4, 8323 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8324 FE_RAM|FE_RAM8K|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ} 8325 , 8326 {PCI_ID_LSI53C1010, 0x00, "1010-33", 6, 31, 7, 8, 8327 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8328 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC| 8329 FE_C10} 8330 , 8331 {PCI_ID_LSI53C1010, 0xff, "1010-33", 6, 31, 7, 8, 8332 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8333 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC| 8334 FE_C10|FE_U3EN} 8335 , 8336 {PCI_ID_LSI53C1010_2, 0xff, "1010-66", 6, 31, 7, 8, 8337 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8338 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_66MHZ|FE_CRC| 8339 FE_C10|FE_U3EN} 8340 , 8341 {PCI_ID_LSI53C1510D, 0xff, "1510d", 6, 31, 7, 4, 8342 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8343 FE_RAM|FE_IO256|FE_LEDC} 8344 }; 8345 8346 /* 8347 * Look up the chip table. 8348 * 8349 * Return a pointer to the chip entry if found, 8350 * zero otherwise. 8351 */ 8352 static const struct sym_pci_chip * 8353 sym_find_pci_chip(device_t dev) 8354 { 8355 const struct sym_pci_chip *chip; 8356 int i; 8357 u_short device_id; 8358 u_char revision; 8359 8360 if (pci_get_vendor(dev) != PCI_VENDOR_NCR) 8361 return NULL; 8362 8363 device_id = pci_get_device(dev); 8364 revision = pci_get_revid(dev); 8365 8366 for (i = 0; i < nitems(sym_pci_dev_table); i++) { 8367 chip = &sym_pci_dev_table[i]; 8368 if (device_id != chip->device_id) 8369 continue; 8370 if (revision > chip->revision_id) 8371 continue; 8372 return chip; 8373 } 8374 8375 return NULL; 8376 } 8377 8378 /* 8379 * Tell upper layer if the chip is supported. 8380 */ 8381 static int 8382 sym_pci_probe(device_t dev) 8383 { 8384 const struct sym_pci_chip *chip; 8385 8386 chip = sym_find_pci_chip(dev); 8387 if (chip && sym_find_firmware(chip)) { 8388 device_set_desc(dev, chip->name); 8389 return (chip->lp_probe_bit & SYM_SETUP_LP_PROBE_MAP)? 8390 BUS_PROBE_LOW_PRIORITY : BUS_PROBE_DEFAULT; 8391 } 8392 return ENXIO; 8393 } 8394 8395 /* 8396 * Attach a sym53c8xx device. 8397 */ 8398 static int 8399 sym_pci_attach(device_t dev) 8400 { 8401 const struct sym_pci_chip *chip; 8402 u_short command; 8403 u_char cachelnsz; 8404 struct sym_hcb *np = NULL; 8405 struct sym_nvram nvram; 8406 const struct sym_fw *fw = NULL; 8407 int i; 8408 bus_dma_tag_t bus_dmat; 8409 8410 bus_dmat = bus_get_dma_tag(dev); 8411 8412 /* 8413 * Only probed devices should be attached. 8414 * We just enjoy being paranoid. :) 8415 */ 8416 chip = sym_find_pci_chip(dev); 8417 if (chip == NULL || (fw = sym_find_firmware(chip)) == NULL) 8418 return (ENXIO); 8419 8420 /* 8421 * Allocate immediately the host control block, 8422 * since we are only expecting to succeed. :) 8423 * We keep track in the HCB of all the resources that 8424 * are to be released on error. 8425 */ 8426 np = __sym_calloc_dma(bus_dmat, sizeof(*np), "HCB"); 8427 if (np) 8428 np->bus_dmat = bus_dmat; 8429 else 8430 return (ENXIO); 8431 device_set_softc(dev, np); 8432 8433 SYM_LOCK_INIT(); 8434 8435 /* 8436 * Copy some useful infos to the HCB. 8437 */ 8438 np->hcb_ba = vtobus(np); 8439 np->verbose = bootverbose; 8440 np->device = dev; 8441 np->device_id = pci_get_device(dev); 8442 np->revision_id = pci_get_revid(dev); 8443 np->features = chip->features; 8444 np->clock_divn = chip->nr_divisor; 8445 np->maxoffs = chip->offset_max; 8446 np->maxburst = chip->burst_max; 8447 np->scripta_sz = fw->a_size; 8448 np->scriptb_sz = fw->b_size; 8449 np->fw_setup = fw->setup; 8450 np->fw_patch = fw->patch; 8451 np->fw_name = fw->name; 8452 8453 #ifdef __amd64__ 8454 np->target = sym_calloc_dma(SYM_CONF_MAX_TARGET * sizeof(*(np->target)), 8455 "TARGET"); 8456 if (!np->target) 8457 goto attach_failed; 8458 #endif 8459 8460 /* 8461 * Initialize the CCB free and busy queues. 8462 */ 8463 sym_que_init(&np->free_ccbq); 8464 sym_que_init(&np->busy_ccbq); 8465 sym_que_init(&np->comp_ccbq); 8466 sym_que_init(&np->cam_ccbq); 8467 8468 /* 8469 * Allocate a tag for the DMA of user data. 8470 */ 8471 if (bus_dma_tag_create(np->bus_dmat, 1, SYM_CONF_DMA_BOUNDARY, 8472 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 8473 BUS_SPACE_MAXSIZE_32BIT, SYM_CONF_MAX_SG, SYM_CONF_DMA_BOUNDARY, 8474 0, busdma_lock_mutex, &np->mtx, &np->data_dmat)) { 8475 device_printf(dev, "failed to create DMA tag.\n"); 8476 goto attach_failed; 8477 } 8478 8479 /* 8480 * Read and apply some fix-ups to the PCI COMMAND 8481 * register. We want the chip to be enabled for: 8482 * - BUS mastering 8483 * - PCI parity checking (reporting would also be fine) 8484 * - Write And Invalidate. 8485 */ 8486 command = pci_read_config(dev, PCIR_COMMAND, 2); 8487 command |= PCIM_CMD_BUSMASTEREN | PCIM_CMD_PERRESPEN | 8488 PCIM_CMD_MWRICEN; 8489 pci_write_config(dev, PCIR_COMMAND, command, 2); 8490 8491 /* 8492 * Let the device know about the cache line size, 8493 * if it doesn't yet. 8494 */ 8495 cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 8496 if (!cachelnsz) { 8497 cachelnsz = 8; 8498 pci_write_config(dev, PCIR_CACHELNSZ, cachelnsz, 1); 8499 } 8500 8501 /* 8502 * Alloc/get/map/retrieve everything that deals with MMIO. 8503 */ 8504 i = SYM_PCI_MMIO; 8505 np->mmio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i, 8506 RF_ACTIVE); 8507 if (!np->mmio_res) { 8508 device_printf(dev, "failed to allocate MMIO resources\n"); 8509 goto attach_failed; 8510 } 8511 np->mmio_ba = rman_get_start(np->mmio_res); 8512 8513 /* 8514 * Allocate the IRQ. 8515 */ 8516 i = 0; 8517 np->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i, 8518 RF_ACTIVE | RF_SHAREABLE); 8519 if (!np->irq_res) { 8520 device_printf(dev, "failed to allocate IRQ resource\n"); 8521 goto attach_failed; 8522 } 8523 8524 #ifdef SYM_CONF_IOMAPPED 8525 /* 8526 * User want us to use normal IO with PCI. 8527 * Alloc/get/map/retrieve everything that deals with IO. 8528 */ 8529 i = SYM_PCI_IO; 8530 np->io_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &i, RF_ACTIVE); 8531 if (!np->io_res) { 8532 device_printf(dev, "failed to allocate IO resources\n"); 8533 goto attach_failed; 8534 } 8535 8536 #endif /* SYM_CONF_IOMAPPED */ 8537 8538 /* 8539 * If the chip has RAM. 8540 * Alloc/get/map/retrieve the corresponding resources. 8541 */ 8542 if (np->features & (FE_RAM|FE_RAM8K)) { 8543 int regs_id = SYM_PCI_RAM; 8544 if (np->features & FE_64BIT) 8545 regs_id = SYM_PCI_RAM64; 8546 np->ram_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 8547 ®s_id, RF_ACTIVE); 8548 if (!np->ram_res) { 8549 device_printf(dev,"failed to allocate RAM resources\n"); 8550 goto attach_failed; 8551 } 8552 np->ram_id = regs_id; 8553 np->ram_ba = rman_get_start(np->ram_res); 8554 } 8555 8556 /* 8557 * Save setting of some IO registers, so we will 8558 * be able to probe specific implementations. 8559 */ 8560 sym_save_initial_setting (np); 8561 8562 /* 8563 * Reset the chip now, since it has been reported 8564 * that SCSI clock calibration may not work properly 8565 * if the chip is currently active. 8566 */ 8567 sym_chip_reset (np); 8568 8569 /* 8570 * Try to read the user set-up. 8571 */ 8572 (void) sym_read_nvram(np, &nvram); 8573 8574 /* 8575 * Prepare controller and devices settings, according 8576 * to chip features, user set-up and driver set-up. 8577 */ 8578 (void) sym_prepare_setting(np, &nvram); 8579 8580 /* 8581 * Check the PCI clock frequency. 8582 * Must be performed after prepare_setting since it destroys 8583 * STEST1 that is used to probe for the clock doubler. 8584 */ 8585 i = sym_getpciclock(np); 8586 if (i > 37000) 8587 device_printf(dev, "PCI BUS clock seems too high: %u KHz.\n",i); 8588 8589 /* 8590 * Allocate the start queue. 8591 */ 8592 np->squeue = (u32 *) sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"SQUEUE"); 8593 if (!np->squeue) 8594 goto attach_failed; 8595 np->squeue_ba = vtobus(np->squeue); 8596 8597 /* 8598 * Allocate the done queue. 8599 */ 8600 np->dqueue = (u32 *) sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"DQUEUE"); 8601 if (!np->dqueue) 8602 goto attach_failed; 8603 np->dqueue_ba = vtobus(np->dqueue); 8604 8605 /* 8606 * Allocate the target bus address array. 8607 */ 8608 np->targtbl = (u32 *) sym_calloc_dma(256, "TARGTBL"); 8609 if (!np->targtbl) 8610 goto attach_failed; 8611 np->targtbl_ba = vtobus(np->targtbl); 8612 8613 /* 8614 * Allocate SCRIPTS areas. 8615 */ 8616 np->scripta0 = sym_calloc_dma(np->scripta_sz, "SCRIPTA0"); 8617 np->scriptb0 = sym_calloc_dma(np->scriptb_sz, "SCRIPTB0"); 8618 if (!np->scripta0 || !np->scriptb0) 8619 goto attach_failed; 8620 8621 /* 8622 * Allocate the CCBs. We need at least ONE. 8623 */ 8624 for (i = 0; sym_alloc_ccb(np) != NULL; i++) 8625 ; 8626 if (i < 1) 8627 goto attach_failed; 8628 8629 /* 8630 * Calculate BUS addresses where we are going 8631 * to load the SCRIPTS. 8632 */ 8633 np->scripta_ba = vtobus(np->scripta0); 8634 np->scriptb_ba = vtobus(np->scriptb0); 8635 np->scriptb0_ba = np->scriptb_ba; 8636 8637 if (np->ram_ba) { 8638 np->scripta_ba = np->ram_ba; 8639 if (np->features & FE_RAM8K) { 8640 np->ram_ws = 8192; 8641 np->scriptb_ba = np->scripta_ba + 4096; 8642 #ifdef __LP64__ 8643 np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32); 8644 #endif 8645 } 8646 else 8647 np->ram_ws = 4096; 8648 } 8649 8650 /* 8651 * Copy scripts to controller instance. 8652 */ 8653 bcopy(fw->a_base, np->scripta0, np->scripta_sz); 8654 bcopy(fw->b_base, np->scriptb0, np->scriptb_sz); 8655 8656 /* 8657 * Setup variable parts in scripts and compute 8658 * scripts bus addresses used from the C code. 8659 */ 8660 np->fw_setup(np, fw); 8661 8662 /* 8663 * Bind SCRIPTS with physical addresses usable by the 8664 * SCRIPTS processor (as seen from the BUS = BUS addresses). 8665 */ 8666 sym_fw_bind_script(np, (u32 *) np->scripta0, np->scripta_sz); 8667 sym_fw_bind_script(np, (u32 *) np->scriptb0, np->scriptb_sz); 8668 8669 #ifdef SYM_CONF_IARB_SUPPORT 8670 /* 8671 * If user wants IARB to be set when we win arbitration 8672 * and have other jobs, compute the max number of consecutive 8673 * settings of IARB hints before we leave devices a chance to 8674 * arbitrate for reselection. 8675 */ 8676 #ifdef SYM_SETUP_IARB_MAX 8677 np->iarb_max = SYM_SETUP_IARB_MAX; 8678 #else 8679 np->iarb_max = 4; 8680 #endif 8681 #endif 8682 8683 /* 8684 * Prepare the idle and invalid task actions. 8685 */ 8686 np->idletask.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8687 np->idletask.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8688 np->idletask_ba = vtobus(&np->idletask); 8689 8690 np->notask.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8691 np->notask.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8692 np->notask_ba = vtobus(&np->notask); 8693 8694 np->bad_itl.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8695 np->bad_itl.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8696 np->bad_itl_ba = vtobus(&np->bad_itl); 8697 8698 np->bad_itlq.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8699 np->bad_itlq.restart = cpu_to_scr(SCRIPTB_BA (np,bad_i_t_l_q)); 8700 np->bad_itlq_ba = vtobus(&np->bad_itlq); 8701 8702 /* 8703 * Allocate and prepare the lun JUMP table that is used 8704 * for a target prior the probing of devices (bad lun table). 8705 * A private table will be allocated for the target on the 8706 * first INQUIRY response received. 8707 */ 8708 np->badluntbl = sym_calloc_dma(256, "BADLUNTBL"); 8709 if (!np->badluntbl) 8710 goto attach_failed; 8711 8712 np->badlun_sa = cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 8713 for (i = 0 ; i < 64 ; i++) /* 64 luns/target, no less */ 8714 np->badluntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa)); 8715 8716 /* 8717 * Prepare the bus address array that contains the bus 8718 * address of each target control block. 8719 * For now, assume all logical units are wrong. :) 8720 */ 8721 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 8722 np->targtbl[i] = cpu_to_scr(vtobus(&np->target[i])); 8723 np->target[i].head.luntbl_sa = 8724 cpu_to_scr(vtobus(np->badluntbl)); 8725 np->target[i].head.lun0_sa = 8726 cpu_to_scr(vtobus(&np->badlun_sa)); 8727 } 8728 8729 /* 8730 * Now check the cache handling of the pci chipset. 8731 */ 8732 if (sym_snooptest (np)) { 8733 device_printf(dev, "CACHE INCORRECTLY CONFIGURED.\n"); 8734 goto attach_failed; 8735 }; 8736 8737 /* 8738 * Now deal with CAM. 8739 * Hopefully, we will succeed with that one.:) 8740 */ 8741 if (!sym_cam_attach(np)) 8742 goto attach_failed; 8743 8744 /* 8745 * Sigh! we are done. 8746 */ 8747 return 0; 8748 8749 /* 8750 * We have failed. 8751 * We will try to free all the resources we have 8752 * allocated, but if we are a boot device, this 8753 * will not help that much.;) 8754 */ 8755 attach_failed: 8756 if (np) 8757 sym_pci_free(np); 8758 return ENXIO; 8759 } 8760 8761 /* 8762 * Free everything that have been allocated for this device. 8763 */ 8764 static void sym_pci_free(hcb_p np) 8765 { 8766 SYM_QUEHEAD *qp; 8767 ccb_p cp; 8768 tcb_p tp; 8769 lcb_p lp; 8770 int target, lun; 8771 8772 /* 8773 * First free CAM resources. 8774 */ 8775 sym_cam_free(np); 8776 8777 /* 8778 * Now every should be quiet for us to 8779 * free other resources. 8780 */ 8781 if (np->ram_res) 8782 bus_release_resource(np->device, SYS_RES_MEMORY, 8783 np->ram_id, np->ram_res); 8784 if (np->mmio_res) 8785 bus_release_resource(np->device, SYS_RES_MEMORY, 8786 SYM_PCI_MMIO, np->mmio_res); 8787 if (np->io_res) 8788 bus_release_resource(np->device, SYS_RES_IOPORT, 8789 SYM_PCI_IO, np->io_res); 8790 if (np->irq_res) 8791 bus_release_resource(np->device, SYS_RES_IRQ, 8792 0, np->irq_res); 8793 8794 if (np->scriptb0) 8795 sym_mfree_dma(np->scriptb0, np->scriptb_sz, "SCRIPTB0"); 8796 if (np->scripta0) 8797 sym_mfree_dma(np->scripta0, np->scripta_sz, "SCRIPTA0"); 8798 if (np->squeue) 8799 sym_mfree_dma(np->squeue, sizeof(u32)*(MAX_QUEUE*2), "SQUEUE"); 8800 if (np->dqueue) 8801 sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE"); 8802 8803 while ((qp = sym_remque_head(&np->free_ccbq)) != NULL) { 8804 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 8805 bus_dmamap_destroy(np->data_dmat, cp->dmamap); 8806 sym_mfree_dma(cp->sns_bbuf, SYM_SNS_BBUF_LEN, "SNS_BBUF"); 8807 sym_mfree_dma(cp, sizeof(*cp), "CCB"); 8808 } 8809 8810 if (np->badluntbl) 8811 sym_mfree_dma(np->badluntbl, 256,"BADLUNTBL"); 8812 8813 for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) { 8814 tp = &np->target[target]; 8815 for (lun = 0 ; lun < SYM_CONF_MAX_LUN ; lun++) { 8816 lp = sym_lp(tp, lun); 8817 if (!lp) 8818 continue; 8819 if (lp->itlq_tbl) 8820 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, 8821 "ITLQ_TBL"); 8822 if (lp->cb_tags) 8823 sym_mfree(lp->cb_tags, SYM_CONF_MAX_TASK, 8824 "CB_TAGS"); 8825 sym_mfree_dma(lp, sizeof(*lp), "LCB"); 8826 } 8827 #if SYM_CONF_MAX_LUN > 1 8828 if (tp->lunmp) 8829 sym_mfree(tp->lunmp, SYM_CONF_MAX_LUN*sizeof(lcb_p), 8830 "LUNMP"); 8831 #endif 8832 } 8833 #ifdef __amd64__ 8834 if (np->target) 8835 sym_mfree_dma(np->target, 8836 SYM_CONF_MAX_TARGET * sizeof(*(np->target)), "TARGET"); 8837 #endif 8838 if (np->targtbl) 8839 sym_mfree_dma(np->targtbl, 256, "TARGTBL"); 8840 if (np->data_dmat) 8841 bus_dma_tag_destroy(np->data_dmat); 8842 if (SYM_LOCK_INITIALIZED() != 0) 8843 SYM_LOCK_DESTROY(); 8844 device_set_softc(np->device, NULL); 8845 sym_mfree_dma(np, sizeof(*np), "HCB"); 8846 } 8847 8848 /* 8849 * Allocate CAM resources and register a bus to CAM. 8850 */ 8851 static int sym_cam_attach(hcb_p np) 8852 { 8853 struct cam_devq *devq = NULL; 8854 struct cam_sim *sim = NULL; 8855 struct cam_path *path = NULL; 8856 int err; 8857 8858 /* 8859 * Establish our interrupt handler. 8860 */ 8861 err = bus_setup_intr(np->device, np->irq_res, 8862 INTR_ENTROPY | INTR_MPSAFE | INTR_TYPE_CAM, 8863 NULL, sym_intr, np, &np->intr); 8864 if (err) { 8865 device_printf(np->device, "bus_setup_intr() failed: %d\n", 8866 err); 8867 goto fail; 8868 } 8869 8870 /* 8871 * Create the device queue for our sym SIM. 8872 */ 8873 devq = cam_simq_alloc(SYM_CONF_MAX_START); 8874 if (!devq) 8875 goto fail; 8876 8877 /* 8878 * Construct our SIM entry. 8879 */ 8880 sim = cam_sim_alloc(sym_action, sym_poll, "sym", np, 8881 device_get_unit(np->device), 8882 &np->mtx, 1, SYM_SETUP_MAX_TAG, devq); 8883 if (!sim) 8884 goto fail; 8885 8886 SYM_LOCK(); 8887 8888 if (xpt_bus_register(sim, np->device, 0) != CAM_SUCCESS) 8889 goto fail; 8890 np->sim = sim; 8891 8892 if (xpt_create_path(&path, NULL, 8893 cam_sim_path(np->sim), CAM_TARGET_WILDCARD, 8894 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 8895 goto fail; 8896 } 8897 np->path = path; 8898 8899 /* 8900 * Establish our async notification handler. 8901 */ 8902 if (xpt_register_async(AC_LOST_DEVICE, sym_async, sim, path) != 8903 CAM_REQ_CMP) 8904 goto fail; 8905 8906 /* 8907 * Start the chip now, without resetting the BUS, since 8908 * it seems that this must stay under control of CAM. 8909 * With LVD/SE capable chips and BUS in SE mode, we may 8910 * get a spurious SMBC interrupt. 8911 */ 8912 sym_init (np, 0); 8913 8914 SYM_UNLOCK(); 8915 8916 return 1; 8917 fail: 8918 if (sim) 8919 cam_sim_free(sim, FALSE); 8920 if (devq) 8921 cam_simq_free(devq); 8922 8923 SYM_UNLOCK(); 8924 8925 sym_cam_free(np); 8926 8927 return 0; 8928 } 8929 8930 /* 8931 * Free everything that deals with CAM. 8932 */ 8933 static void sym_cam_free(hcb_p np) 8934 { 8935 8936 SYM_LOCK_ASSERT(MA_NOTOWNED); 8937 8938 if (np->intr) { 8939 bus_teardown_intr(np->device, np->irq_res, np->intr); 8940 np->intr = NULL; 8941 } 8942 8943 SYM_LOCK(); 8944 8945 if (np->sim) { 8946 xpt_bus_deregister(cam_sim_path(np->sim)); 8947 cam_sim_free(np->sim, /*free_devq*/ TRUE); 8948 np->sim = NULL; 8949 } 8950 if (np->path) { 8951 xpt_free_path(np->path); 8952 np->path = NULL; 8953 } 8954 8955 SYM_UNLOCK(); 8956 } 8957 8958 /*============ OPTIONNAL NVRAM SUPPORT =================*/ 8959 8960 /* 8961 * Get host setup from NVRAM. 8962 */ 8963 static void sym_nvram_setup_host (hcb_p np, struct sym_nvram *nvram) 8964 { 8965 #ifdef SYM_CONF_NVRAM_SUPPORT 8966 /* 8967 * Get parity checking, host ID, verbose mode 8968 * and miscellaneous host flags from NVRAM. 8969 */ 8970 switch(nvram->type) { 8971 case SYM_SYMBIOS_NVRAM: 8972 if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE)) 8973 np->rv_scntl0 &= ~0x0a; 8974 np->myaddr = nvram->data.Symbios.host_id & 0x0f; 8975 if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS) 8976 np->verbose += 1; 8977 if (nvram->data.Symbios.flags1 & SYMBIOS_SCAN_HI_LO) 8978 np->usrflags |= SYM_SCAN_TARGETS_HILO; 8979 if (nvram->data.Symbios.flags2 & SYMBIOS_AVOID_BUS_RESET) 8980 np->usrflags |= SYM_AVOID_BUS_RESET; 8981 break; 8982 case SYM_TEKRAM_NVRAM: 8983 np->myaddr = nvram->data.Tekram.host_id & 0x0f; 8984 break; 8985 default: 8986 break; 8987 } 8988 #endif 8989 } 8990 8991 /* 8992 * Get target setup from NVRAM. 8993 */ 8994 #ifdef SYM_CONF_NVRAM_SUPPORT 8995 static void sym_Symbios_setup_target(hcb_p np,int target, Symbios_nvram *nvram); 8996 static void sym_Tekram_setup_target(hcb_p np,int target, Tekram_nvram *nvram); 8997 #endif 8998 8999 static void 9000 sym_nvram_setup_target (hcb_p np, int target, struct sym_nvram *nvp) 9001 { 9002 #ifdef SYM_CONF_NVRAM_SUPPORT 9003 switch(nvp->type) { 9004 case SYM_SYMBIOS_NVRAM: 9005 sym_Symbios_setup_target (np, target, &nvp->data.Symbios); 9006 break; 9007 case SYM_TEKRAM_NVRAM: 9008 sym_Tekram_setup_target (np, target, &nvp->data.Tekram); 9009 break; 9010 default: 9011 break; 9012 } 9013 #endif 9014 } 9015 9016 #ifdef SYM_CONF_NVRAM_SUPPORT 9017 /* 9018 * Get target set-up from Symbios format NVRAM. 9019 */ 9020 static void 9021 sym_Symbios_setup_target(hcb_p np, int target, Symbios_nvram *nvram) 9022 { 9023 tcb_p tp = &np->target[target]; 9024 Symbios_target *tn = &nvram->target[target]; 9025 9026 tp->tinfo.user.period = tn->sync_period ? (tn->sync_period + 3) / 4 : 0; 9027 tp->tinfo.user.width = tn->bus_width == 0x10 ? BUS_16_BIT : BUS_8_BIT; 9028 tp->usrtags = 9029 (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? SYM_SETUP_MAX_TAG : 0; 9030 9031 if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE)) 9032 tp->usrflags &= ~SYM_DISC_ENABLED; 9033 if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME)) 9034 tp->usrflags |= SYM_SCAN_BOOT_DISABLED; 9035 if (!(tn->flags & SYMBIOS_SCAN_LUNS)) 9036 tp->usrflags |= SYM_SCAN_LUNS_DISABLED; 9037 } 9038 9039 /* 9040 * Get target set-up from Tekram format NVRAM. 9041 */ 9042 static void 9043 sym_Tekram_setup_target(hcb_p np, int target, Tekram_nvram *nvram) 9044 { 9045 tcb_p tp = &np->target[target]; 9046 struct Tekram_target *tn = &nvram->target[target]; 9047 int i; 9048 9049 if (tn->flags & TEKRAM_SYNC_NEGO) { 9050 i = tn->sync_index & 0xf; 9051 tp->tinfo.user.period = Tekram_sync[i]; 9052 } 9053 9054 tp->tinfo.user.width = 9055 (tn->flags & TEKRAM_WIDE_NEGO) ? BUS_16_BIT : BUS_8_BIT; 9056 9057 if (tn->flags & TEKRAM_TAGGED_COMMANDS) { 9058 tp->usrtags = 2 << nvram->max_tags_index; 9059 } 9060 9061 if (tn->flags & TEKRAM_DISCONNECT_ENABLE) 9062 tp->usrflags |= SYM_DISC_ENABLED; 9063 9064 /* If any device does not support parity, we will not use this option */ 9065 if (!(tn->flags & TEKRAM_PARITY_CHECK)) 9066 np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */ 9067 } 9068 9069 #ifdef SYM_CONF_DEBUG_NVRAM 9070 /* 9071 * Dump Symbios format NVRAM for debugging purpose. 9072 */ 9073 static void sym_display_Symbios_nvram(hcb_p np, Symbios_nvram *nvram) 9074 { 9075 int i; 9076 9077 /* display Symbios nvram host data */ 9078 printf("%s: HOST ID=%d%s%s%s%s%s%s\n", 9079 sym_name(np), nvram->host_id & 0x0f, 9080 (nvram->flags & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", 9081 (nvram->flags & SYMBIOS_PARITY_ENABLE) ? " PARITY" :"", 9082 (nvram->flags & SYMBIOS_VERBOSE_MSGS) ? " VERBOSE" :"", 9083 (nvram->flags & SYMBIOS_CHS_MAPPING) ? " CHS_ALT" :"", 9084 (nvram->flags2 & SYMBIOS_AVOID_BUS_RESET)?" NO_RESET" :"", 9085 (nvram->flags1 & SYMBIOS_SCAN_HI_LO) ? " HI_LO" :""); 9086 9087 /* display Symbios nvram drive data */ 9088 for (i = 0 ; i < 15 ; i++) { 9089 struct Symbios_target *tn = &nvram->target[i]; 9090 printf("%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n", 9091 sym_name(np), i, 9092 (tn->flags & SYMBIOS_DISCONNECT_ENABLE) ? " DISC" : "", 9093 (tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME) ? " SCAN_BOOT" : "", 9094 (tn->flags & SYMBIOS_SCAN_LUNS) ? " SCAN_LUNS" : "", 9095 (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? " TCQ" : "", 9096 tn->bus_width, 9097 tn->sync_period / 4, 9098 tn->timeout); 9099 } 9100 } 9101 9102 /* 9103 * Dump TEKRAM format NVRAM for debugging purpose. 9104 */ 9105 static const u_char Tekram_boot_delay[7] = {3, 5, 10, 20, 30, 60, 120}; 9106 static void sym_display_Tekram_nvram(hcb_p np, Tekram_nvram *nvram) 9107 { 9108 int i, tags, boot_delay; 9109 char *rem; 9110 9111 /* display Tekram nvram host data */ 9112 tags = 2 << nvram->max_tags_index; 9113 boot_delay = 0; 9114 if (nvram->boot_delay_index < 6) 9115 boot_delay = Tekram_boot_delay[nvram->boot_delay_index]; 9116 switch((nvram->flags & TEKRAM_REMOVABLE_FLAGS) >> 6) { 9117 default: 9118 case 0: rem = ""; break; 9119 case 1: rem = " REMOVABLE=boot device"; break; 9120 case 2: rem = " REMOVABLE=all"; break; 9121 } 9122 9123 printf("%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n", 9124 sym_name(np), nvram->host_id & 0x0f, 9125 (nvram->flags1 & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", 9126 (nvram->flags & TEKRAM_MORE_THAN_2_DRIVES) ? " >2DRIVES" :"", 9127 (nvram->flags & TEKRAM_DRIVES_SUP_1GB) ? " >1GB" :"", 9128 (nvram->flags & TEKRAM_RESET_ON_POWER_ON) ? " RESET" :"", 9129 (nvram->flags & TEKRAM_ACTIVE_NEGATION) ? " ACT_NEG" :"", 9130 (nvram->flags & TEKRAM_IMMEDIATE_SEEK) ? " IMM_SEEK" :"", 9131 (nvram->flags & TEKRAM_SCAN_LUNS) ? " SCAN_LUNS" :"", 9132 (nvram->flags1 & TEKRAM_F2_F6_ENABLED) ? " F2_F6" :"", 9133 rem, boot_delay, tags); 9134 9135 /* display Tekram nvram drive data */ 9136 for (i = 0; i <= 15; i++) { 9137 int sync, j; 9138 struct Tekram_target *tn = &nvram->target[i]; 9139 j = tn->sync_index & 0xf; 9140 sync = Tekram_sync[j]; 9141 printf("%s-%d:%s%s%s%s%s%s PERIOD=%d\n", 9142 sym_name(np), i, 9143 (tn->flags & TEKRAM_PARITY_CHECK) ? " PARITY" : "", 9144 (tn->flags & TEKRAM_SYNC_NEGO) ? " SYNC" : "", 9145 (tn->flags & TEKRAM_DISCONNECT_ENABLE) ? " DISC" : "", 9146 (tn->flags & TEKRAM_START_CMD) ? " START" : "", 9147 (tn->flags & TEKRAM_TAGGED_COMMANDS) ? " TCQ" : "", 9148 (tn->flags & TEKRAM_WIDE_NEGO) ? " WIDE" : "", 9149 sync); 9150 } 9151 } 9152 #endif /* SYM_CONF_DEBUG_NVRAM */ 9153 #endif /* SYM_CONF_NVRAM_SUPPORT */ 9154 9155 /* 9156 * Try reading Symbios or Tekram NVRAM 9157 */ 9158 #ifdef SYM_CONF_NVRAM_SUPPORT 9159 static int sym_read_Symbios_nvram (hcb_p np, Symbios_nvram *nvram); 9160 static int sym_read_Tekram_nvram (hcb_p np, Tekram_nvram *nvram); 9161 #endif 9162 9163 static int sym_read_nvram(hcb_p np, struct sym_nvram *nvp) 9164 { 9165 #ifdef SYM_CONF_NVRAM_SUPPORT 9166 /* 9167 * Try to read SYMBIOS nvram. 9168 * Try to read TEKRAM nvram if Symbios nvram not found. 9169 */ 9170 if (SYM_SETUP_SYMBIOS_NVRAM && 9171 !sym_read_Symbios_nvram (np, &nvp->data.Symbios)) { 9172 nvp->type = SYM_SYMBIOS_NVRAM; 9173 #ifdef SYM_CONF_DEBUG_NVRAM 9174 sym_display_Symbios_nvram(np, &nvp->data.Symbios); 9175 #endif 9176 } 9177 else if (SYM_SETUP_TEKRAM_NVRAM && 9178 !sym_read_Tekram_nvram (np, &nvp->data.Tekram)) { 9179 nvp->type = SYM_TEKRAM_NVRAM; 9180 #ifdef SYM_CONF_DEBUG_NVRAM 9181 sym_display_Tekram_nvram(np, &nvp->data.Tekram); 9182 #endif 9183 } 9184 else 9185 nvp->type = 0; 9186 #else 9187 nvp->type = 0; 9188 #endif 9189 return nvp->type; 9190 } 9191 9192 #ifdef SYM_CONF_NVRAM_SUPPORT 9193 /* 9194 * 24C16 EEPROM reading. 9195 * 9196 * GPOI0 - data in/data out 9197 * GPIO1 - clock 9198 * Symbios NVRAM wiring now also used by Tekram. 9199 */ 9200 9201 #define SET_BIT 0 9202 #define CLR_BIT 1 9203 #define SET_CLK 2 9204 #define CLR_CLK 3 9205 9206 /* 9207 * Set/clear data/clock bit in GPIO0 9208 */ 9209 static void S24C16_set_bit(hcb_p np, u_char write_bit, u_char *gpreg, 9210 int bit_mode) 9211 { 9212 UDELAY (5); 9213 switch (bit_mode){ 9214 case SET_BIT: 9215 *gpreg |= write_bit; 9216 break; 9217 case CLR_BIT: 9218 *gpreg &= 0xfe; 9219 break; 9220 case SET_CLK: 9221 *gpreg |= 0x02; 9222 break; 9223 case CLR_CLK: 9224 *gpreg &= 0xfd; 9225 break; 9226 9227 } 9228 OUTB (nc_gpreg, *gpreg); 9229 UDELAY (5); 9230 } 9231 9232 /* 9233 * Send START condition to NVRAM to wake it up. 9234 */ 9235 static void S24C16_start(hcb_p np, u_char *gpreg) 9236 { 9237 S24C16_set_bit(np, 1, gpreg, SET_BIT); 9238 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9239 S24C16_set_bit(np, 0, gpreg, CLR_BIT); 9240 S24C16_set_bit(np, 0, gpreg, CLR_CLK); 9241 } 9242 9243 /* 9244 * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!! 9245 */ 9246 static void S24C16_stop(hcb_p np, u_char *gpreg) 9247 { 9248 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9249 S24C16_set_bit(np, 1, gpreg, SET_BIT); 9250 } 9251 9252 /* 9253 * Read or write a bit to the NVRAM, 9254 * read if GPIO0 input else write if GPIO0 output 9255 */ 9256 static void S24C16_do_bit(hcb_p np, u_char *read_bit, u_char write_bit, 9257 u_char *gpreg) 9258 { 9259 S24C16_set_bit(np, write_bit, gpreg, SET_BIT); 9260 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9261 if (read_bit) 9262 *read_bit = INB (nc_gpreg); 9263 S24C16_set_bit(np, 0, gpreg, CLR_CLK); 9264 S24C16_set_bit(np, 0, gpreg, CLR_BIT); 9265 } 9266 9267 /* 9268 * Output an ACK to the NVRAM after reading, 9269 * change GPIO0 to output and when done back to an input 9270 */ 9271 static void S24C16_write_ack(hcb_p np, u_char write_bit, u_char *gpreg, 9272 u_char *gpcntl) 9273 { 9274 OUTB (nc_gpcntl, *gpcntl & 0xfe); 9275 S24C16_do_bit(np, 0, write_bit, gpreg); 9276 OUTB (nc_gpcntl, *gpcntl); 9277 } 9278 9279 /* 9280 * Input an ACK from NVRAM after writing, 9281 * change GPIO0 to input and when done back to an output 9282 */ 9283 static void S24C16_read_ack(hcb_p np, u_char *read_bit, u_char *gpreg, 9284 u_char *gpcntl) 9285 { 9286 OUTB (nc_gpcntl, *gpcntl | 0x01); 9287 S24C16_do_bit(np, read_bit, 1, gpreg); 9288 OUTB (nc_gpcntl, *gpcntl); 9289 } 9290 9291 /* 9292 * WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK, 9293 * GPIO0 must already be set as an output 9294 */ 9295 static void S24C16_write_byte(hcb_p np, u_char *ack_data, u_char write_data, 9296 u_char *gpreg, u_char *gpcntl) 9297 { 9298 int x; 9299 9300 for (x = 0; x < 8; x++) 9301 S24C16_do_bit(np, 0, (write_data >> (7 - x)) & 0x01, gpreg); 9302 9303 S24C16_read_ack(np, ack_data, gpreg, gpcntl); 9304 } 9305 9306 /* 9307 * READ a byte from the NVRAM and then send an ACK to say we have got it, 9308 * GPIO0 must already be set as an input 9309 */ 9310 static void S24C16_read_byte(hcb_p np, u_char *read_data, u_char ack_data, 9311 u_char *gpreg, u_char *gpcntl) 9312 { 9313 int x; 9314 u_char read_bit; 9315 9316 *read_data = 0; 9317 for (x = 0; x < 8; x++) { 9318 S24C16_do_bit(np, &read_bit, 1, gpreg); 9319 *read_data |= ((read_bit & 0x01) << (7 - x)); 9320 } 9321 9322 S24C16_write_ack(np, ack_data, gpreg, gpcntl); 9323 } 9324 9325 /* 9326 * Read 'len' bytes starting at 'offset'. 9327 */ 9328 static int sym_read_S24C16_nvram (hcb_p np, int offset, u_char *data, int len) 9329 { 9330 u_char gpcntl, gpreg; 9331 u_char old_gpcntl, old_gpreg; 9332 u_char ack_data; 9333 int retv = 1; 9334 int x; 9335 9336 /* save current state of GPCNTL and GPREG */ 9337 old_gpreg = INB (nc_gpreg); 9338 old_gpcntl = INB (nc_gpcntl); 9339 gpcntl = old_gpcntl & 0x1c; 9340 9341 /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ 9342 OUTB (nc_gpreg, old_gpreg); 9343 OUTB (nc_gpcntl, gpcntl); 9344 9345 /* this is to set NVRAM into a known state with GPIO0/1 both low */ 9346 gpreg = old_gpreg; 9347 S24C16_set_bit(np, 0, &gpreg, CLR_CLK); 9348 S24C16_set_bit(np, 0, &gpreg, CLR_BIT); 9349 9350 /* now set NVRAM inactive with GPIO0/1 both high */ 9351 S24C16_stop(np, &gpreg); 9352 9353 /* activate NVRAM */ 9354 S24C16_start(np, &gpreg); 9355 9356 /* write device code and random address MSB */ 9357 S24C16_write_byte(np, &ack_data, 9358 0xa0 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); 9359 if (ack_data & 0x01) 9360 goto out; 9361 9362 /* write random address LSB */ 9363 S24C16_write_byte(np, &ack_data, 9364 offset & 0xff, &gpreg, &gpcntl); 9365 if (ack_data & 0x01) 9366 goto out; 9367 9368 /* regenerate START state to set up for reading */ 9369 S24C16_start(np, &gpreg); 9370 9371 /* rewrite device code and address MSB with read bit set (lsb = 0x01) */ 9372 S24C16_write_byte(np, &ack_data, 9373 0xa1 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); 9374 if (ack_data & 0x01) 9375 goto out; 9376 9377 /* now set up GPIO0 for inputting data */ 9378 gpcntl |= 0x01; 9379 OUTB (nc_gpcntl, gpcntl); 9380 9381 /* input all requested data - only part of total NVRAM */ 9382 for (x = 0; x < len; x++) 9383 S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl); 9384 9385 /* finally put NVRAM back in inactive mode */ 9386 gpcntl &= 0xfe; 9387 OUTB (nc_gpcntl, gpcntl); 9388 S24C16_stop(np, &gpreg); 9389 retv = 0; 9390 out: 9391 /* return GPIO0/1 to original states after having accessed NVRAM */ 9392 OUTB (nc_gpcntl, old_gpcntl); 9393 OUTB (nc_gpreg, old_gpreg); 9394 9395 return retv; 9396 } 9397 9398 #undef SET_BIT /* 0 */ 9399 #undef CLR_BIT /* 1 */ 9400 #undef SET_CLK /* 2 */ 9401 #undef CLR_CLK /* 3 */ 9402 9403 /* 9404 * Try reading Symbios NVRAM. 9405 * Return 0 if OK. 9406 */ 9407 static int sym_read_Symbios_nvram (hcb_p np, Symbios_nvram *nvram) 9408 { 9409 static u_char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0}; 9410 u_char *data = (u_char *) nvram; 9411 int len = sizeof(*nvram); 9412 u_short csum; 9413 int x; 9414 9415 /* probe the 24c16 and read the SYMBIOS 24c16 area */ 9416 if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS, data, len)) 9417 return 1; 9418 9419 /* check valid NVRAM signature, verify byte count and checksum */ 9420 if (nvram->type != 0 || 9421 bcmp(nvram->trailer, Symbios_trailer, 6) || 9422 nvram->byte_count != len - 12) 9423 return 1; 9424 9425 /* verify checksum */ 9426 for (x = 6, csum = 0; x < len - 6; x++) 9427 csum += data[x]; 9428 if (csum != nvram->checksum) 9429 return 1; 9430 9431 return 0; 9432 } 9433 9434 /* 9435 * 93C46 EEPROM reading. 9436 * 9437 * GPOI0 - data in 9438 * GPIO1 - data out 9439 * GPIO2 - clock 9440 * GPIO4 - chip select 9441 * 9442 * Used by Tekram. 9443 */ 9444 9445 /* 9446 * Pulse clock bit in GPIO0 9447 */ 9448 static void T93C46_Clk(hcb_p np, u_char *gpreg) 9449 { 9450 OUTB (nc_gpreg, *gpreg | 0x04); 9451 UDELAY (2); 9452 OUTB (nc_gpreg, *gpreg); 9453 } 9454 9455 /* 9456 * Read bit from NVRAM 9457 */ 9458 static void T93C46_Read_Bit(hcb_p np, u_char *read_bit, u_char *gpreg) 9459 { 9460 UDELAY (2); 9461 T93C46_Clk(np, gpreg); 9462 *read_bit = INB (nc_gpreg); 9463 } 9464 9465 /* 9466 * Write bit to GPIO0 9467 */ 9468 static void T93C46_Write_Bit(hcb_p np, u_char write_bit, u_char *gpreg) 9469 { 9470 if (write_bit & 0x01) 9471 *gpreg |= 0x02; 9472 else 9473 *gpreg &= 0xfd; 9474 9475 *gpreg |= 0x10; 9476 9477 OUTB (nc_gpreg, *gpreg); 9478 UDELAY (2); 9479 9480 T93C46_Clk(np, gpreg); 9481 } 9482 9483 /* 9484 * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!! 9485 */ 9486 static void T93C46_Stop(hcb_p np, u_char *gpreg) 9487 { 9488 *gpreg &= 0xef; 9489 OUTB (nc_gpreg, *gpreg); 9490 UDELAY (2); 9491 9492 T93C46_Clk(np, gpreg); 9493 } 9494 9495 /* 9496 * Send read command and address to NVRAM 9497 */ 9498 static void T93C46_Send_Command(hcb_p np, u_short write_data, 9499 u_char *read_bit, u_char *gpreg) 9500 { 9501 int x; 9502 9503 /* send 9 bits, start bit (1), command (2), address (6) */ 9504 for (x = 0; x < 9; x++) 9505 T93C46_Write_Bit(np, (u_char) (write_data >> (8 - x)), gpreg); 9506 9507 *read_bit = INB (nc_gpreg); 9508 } 9509 9510 /* 9511 * READ 2 bytes from the NVRAM 9512 */ 9513 static void T93C46_Read_Word(hcb_p np, u_short *nvram_data, u_char *gpreg) 9514 { 9515 int x; 9516 u_char read_bit; 9517 9518 *nvram_data = 0; 9519 for (x = 0; x < 16; x++) { 9520 T93C46_Read_Bit(np, &read_bit, gpreg); 9521 9522 if (read_bit & 0x01) 9523 *nvram_data |= (0x01 << (15 - x)); 9524 else 9525 *nvram_data &= ~(0x01 << (15 - x)); 9526 } 9527 } 9528 9529 /* 9530 * Read Tekram NvRAM data. 9531 */ 9532 static int T93C46_Read_Data(hcb_p np, u_short *data,int len,u_char *gpreg) 9533 { 9534 u_char read_bit; 9535 int x; 9536 9537 for (x = 0; x < len; x++) { 9538 9539 /* output read command and address */ 9540 T93C46_Send_Command(np, 0x180 | x, &read_bit, gpreg); 9541 if (read_bit & 0x01) 9542 return 1; /* Bad */ 9543 T93C46_Read_Word(np, &data[x], gpreg); 9544 T93C46_Stop(np, gpreg); 9545 } 9546 9547 return 0; 9548 } 9549 9550 /* 9551 * Try reading 93C46 Tekram NVRAM. 9552 */ 9553 static int sym_read_T93C46_nvram (hcb_p np, Tekram_nvram *nvram) 9554 { 9555 u_char gpcntl, gpreg; 9556 u_char old_gpcntl, old_gpreg; 9557 int retv = 1; 9558 9559 /* save current state of GPCNTL and GPREG */ 9560 old_gpreg = INB (nc_gpreg); 9561 old_gpcntl = INB (nc_gpcntl); 9562 9563 /* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in, 9564 1/2/4 out */ 9565 gpreg = old_gpreg & 0xe9; 9566 OUTB (nc_gpreg, gpreg); 9567 gpcntl = (old_gpcntl & 0xe9) | 0x09; 9568 OUTB (nc_gpcntl, gpcntl); 9569 9570 /* input all of NVRAM, 64 words */ 9571 retv = T93C46_Read_Data(np, (u_short *) nvram, 9572 sizeof(*nvram) / sizeof(short), &gpreg); 9573 9574 /* return GPIO0/1/2/4 to original states after having accessed NVRAM */ 9575 OUTB (nc_gpcntl, old_gpcntl); 9576 OUTB (nc_gpreg, old_gpreg); 9577 9578 return retv; 9579 } 9580 9581 /* 9582 * Try reading Tekram NVRAM. 9583 * Return 0 if OK. 9584 */ 9585 static int sym_read_Tekram_nvram (hcb_p np, Tekram_nvram *nvram) 9586 { 9587 u_char *data = (u_char *) nvram; 9588 int len = sizeof(*nvram); 9589 u_short csum; 9590 int x; 9591 9592 switch (np->device_id) { 9593 case PCI_ID_SYM53C885: 9594 case PCI_ID_SYM53C895: 9595 case PCI_ID_SYM53C896: 9596 x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, 9597 data, len); 9598 break; 9599 case PCI_ID_SYM53C875: 9600 x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, 9601 data, len); 9602 if (!x) 9603 break; 9604 default: 9605 x = sym_read_T93C46_nvram(np, nvram); 9606 break; 9607 } 9608 if (x) 9609 return 1; 9610 9611 /* verify checksum */ 9612 for (x = 0, csum = 0; x < len - 1; x += 2) 9613 csum += data[x] + (data[x+1] << 8); 9614 if (csum != 0x1234) 9615 return 1; 9616 9617 return 0; 9618 } 9619 9620 #endif /* SYM_CONF_NVRAM_SUPPORT */ 9621