1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 5 * PCI-SCSI controllers. 6 * 7 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 8 * 9 * This driver also supports the following Symbios/LSI PCI-SCSI chips: 10 * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895, 11 * 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode. 12 * 13 * 14 * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. 15 * Copyright (C) 1998-1999 Gerard Roudier 16 * 17 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 18 * a port of the FreeBSD ncr driver to Linux-1.2.13. 19 * 20 * The original ncr driver has been written for 386bsd and FreeBSD by 21 * Wolfgang Stanglmeier <wolf@cologne.de> 22 * Stefan Esser <se@mi.Uni-Koeln.de> 23 * Copyright (C) 1994 Wolfgang Stanglmeier 24 * 25 * The initialisation code, and part of the code that addresses 26 * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM 27 * written by Justin T. Gibbs. 28 * 29 * Other major contributions: 30 * 31 * NVRAM detection and reading. 32 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 33 * 34 *----------------------------------------------------------------------------- 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. The name of the author may not be used to endorse or promote products 45 * derived from this software without specific prior written permission. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 48 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 49 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 50 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 51 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 52 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 53 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 54 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 55 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 56 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 57 * SUCH DAMAGE. 58 */ 59 60 #include <sys/cdefs.h> 61 __FBSDID("$FreeBSD$"); 62 63 #define SYM_DRIVER_NAME "sym-1.6.5-20000902" 64 65 /* #define SYM_DEBUG_GENERIC_SUPPORT */ 66 67 #include <sys/param.h> 68 69 /* 70 * Driver configuration options. 71 */ 72 #include "opt_sym.h" 73 #include <dev/sym/sym_conf.h> 74 75 #include <sys/systm.h> 76 #include <sys/malloc.h> 77 #include <sys/endian.h> 78 #include <sys/kernel.h> 79 #include <sys/lock.h> 80 #include <sys/mutex.h> 81 #include <sys/module.h> 82 #include <sys/bus.h> 83 84 #include <sys/proc.h> 85 86 #include <dev/pci/pcireg.h> 87 #include <dev/pci/pcivar.h> 88 89 #include <machine/bus.h> 90 #include <machine/resource.h> 91 #include <machine/atomic.h> 92 93 #include <sys/rman.h> 94 95 #include <cam/cam.h> 96 #include <cam/cam_ccb.h> 97 #include <cam/cam_sim.h> 98 #include <cam/cam_xpt_sim.h> 99 #include <cam/cam_debug.h> 100 101 #include <cam/scsi/scsi_all.h> 102 #include <cam/scsi/scsi_message.h> 103 104 /* Short and quite clear integer types */ 105 typedef int8_t s8; 106 typedef int16_t s16; 107 typedef int32_t s32; 108 typedef u_int8_t u8; 109 typedef u_int16_t u16; 110 typedef u_int32_t u32; 111 112 /* 113 * Driver definitions. 114 */ 115 #include <dev/sym/sym_defs.h> 116 #include <dev/sym/sym_fw.h> 117 118 /* 119 * IA32 architecture does not reorder STORES and prevents 120 * LOADS from passing STORES. It is called `program order' 121 * by Intel and allows device drivers to deal with memory 122 * ordering by only ensuring that the code is not reordered 123 * by the compiler when ordering is required. 124 * Other architectures implement a weaker ordering that 125 * requires memory barriers (and also IO barriers when they 126 * make sense) to be used. 127 */ 128 #if defined __i386__ || defined __amd64__ 129 #define MEMORY_BARRIER() do { ; } while(0) 130 #elif defined __powerpc__ 131 #define MEMORY_BARRIER() __asm__ volatile("eieio; sync" : : : "memory") 132 #elif defined __arm__ 133 #define MEMORY_BARRIER() dmb() 134 #elif defined __aarch64__ 135 #define MEMORY_BARRIER() dmb(sy) 136 #elif defined __riscv 137 #define MEMORY_BARRIER() fence() 138 #else 139 #error "Not supported platform" 140 #endif 141 142 /* 143 * A la VMS/CAM-3 queue management. 144 */ 145 typedef struct sym_quehead { 146 struct sym_quehead *flink; /* Forward pointer */ 147 struct sym_quehead *blink; /* Backward pointer */ 148 } SYM_QUEHEAD; 149 150 #define sym_que_init(ptr) do { \ 151 (ptr)->flink = (ptr); (ptr)->blink = (ptr); \ 152 } while (0) 153 154 static __inline void __sym_que_add(struct sym_quehead * new, 155 struct sym_quehead * blink, 156 struct sym_quehead * flink) 157 { 158 flink->blink = new; 159 new->flink = flink; 160 new->blink = blink; 161 blink->flink = new; 162 } 163 164 static __inline void __sym_que_del(struct sym_quehead * blink, 165 struct sym_quehead * flink) 166 { 167 flink->blink = blink; 168 blink->flink = flink; 169 } 170 171 static __inline int sym_que_empty(struct sym_quehead *head) 172 { 173 return head->flink == head; 174 } 175 176 static __inline void sym_que_splice(struct sym_quehead *list, 177 struct sym_quehead *head) 178 { 179 struct sym_quehead *first = list->flink; 180 181 if (first != list) { 182 struct sym_quehead *last = list->blink; 183 struct sym_quehead *at = head->flink; 184 185 first->blink = head; 186 head->flink = first; 187 188 last->flink = at; 189 at->blink = last; 190 } 191 } 192 193 #define sym_que_entry(ptr, type, member) \ 194 ((type *)((char *)(ptr)-(size_t)(&((type *)0)->member))) 195 196 #define sym_insque(new, pos) __sym_que_add(new, pos, (pos)->flink) 197 198 #define sym_remque(el) __sym_que_del((el)->blink, (el)->flink) 199 200 #define sym_insque_head(new, head) __sym_que_add(new, head, (head)->flink) 201 202 static __inline struct sym_quehead *sym_remque_head(struct sym_quehead *head) 203 { 204 struct sym_quehead *elem = head->flink; 205 206 if (elem != head) 207 __sym_que_del(head, elem->flink); 208 else 209 elem = NULL; 210 return elem; 211 } 212 213 #define sym_insque_tail(new, head) __sym_que_add(new, (head)->blink, head) 214 215 /* 216 * This one may be useful. 217 */ 218 #define FOR_EACH_QUEUED_ELEMENT(head, qp) \ 219 for (qp = (head)->flink; qp != (head); qp = qp->flink) 220 /* 221 * FreeBSD does not offer our kind of queue in the CAM CCB. 222 * So, we have to cast. 223 */ 224 #define sym_qptr(p) ((struct sym_quehead *) (p)) 225 226 /* 227 * Simple bitmap operations. 228 */ 229 #define sym_set_bit(p, n) (((u32 *)(p))[(n)>>5] |= (1<<((n)&0x1f))) 230 #define sym_clr_bit(p, n) (((u32 *)(p))[(n)>>5] &= ~(1<<((n)&0x1f))) 231 #define sym_is_bit(p, n) (((u32 *)(p))[(n)>>5] & (1<<((n)&0x1f))) 232 233 /* 234 * Number of tasks per device we want to handle. 235 */ 236 #if SYM_CONF_MAX_TAG_ORDER > 8 237 #error "more than 256 tags per logical unit not allowed." 238 #endif 239 #define SYM_CONF_MAX_TASK (1<<SYM_CONF_MAX_TAG_ORDER) 240 241 /* 242 * Donnot use more tasks that we can handle. 243 */ 244 #ifndef SYM_CONF_MAX_TAG 245 #define SYM_CONF_MAX_TAG SYM_CONF_MAX_TASK 246 #endif 247 #if SYM_CONF_MAX_TAG > SYM_CONF_MAX_TASK 248 #undef SYM_CONF_MAX_TAG 249 #define SYM_CONF_MAX_TAG SYM_CONF_MAX_TASK 250 #endif 251 252 /* 253 * This one means 'NO TAG for this job' 254 */ 255 #define NO_TAG (256) 256 257 /* 258 * Number of SCSI targets. 259 */ 260 #if SYM_CONF_MAX_TARGET > 16 261 #error "more than 16 targets not allowed." 262 #endif 263 264 /* 265 * Number of logical units per target. 266 */ 267 #if SYM_CONF_MAX_LUN > 64 268 #error "more than 64 logical units per target not allowed." 269 #endif 270 271 /* 272 * Asynchronous pre-scaler (ns). Shall be 40 for 273 * the SCSI timings to be compliant. 274 */ 275 #define SYM_CONF_MIN_ASYNC (40) 276 277 /* 278 * Number of entries in the START and DONE queues. 279 * 280 * We limit to 1 PAGE in order to succeed allocation of 281 * these queues. Each entry is 8 bytes long (2 DWORDS). 282 */ 283 #ifdef SYM_CONF_MAX_START 284 #define SYM_CONF_MAX_QUEUE (SYM_CONF_MAX_START+2) 285 #else 286 #define SYM_CONF_MAX_QUEUE (7*SYM_CONF_MAX_TASK+2) 287 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2) 288 #endif 289 290 #if SYM_CONF_MAX_QUEUE > PAGE_SIZE/8 291 #undef SYM_CONF_MAX_QUEUE 292 #define SYM_CONF_MAX_QUEUE PAGE_SIZE/8 293 #undef SYM_CONF_MAX_START 294 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2) 295 #endif 296 297 /* 298 * For this one, we want a short name :-) 299 */ 300 #define MAX_QUEUE SYM_CONF_MAX_QUEUE 301 302 /* 303 * Active debugging tags and verbosity. 304 */ 305 #define DEBUG_ALLOC (0x0001) 306 #define DEBUG_PHASE (0x0002) 307 #define DEBUG_POLL (0x0004) 308 #define DEBUG_QUEUE (0x0008) 309 #define DEBUG_RESULT (0x0010) 310 #define DEBUG_SCATTER (0x0020) 311 #define DEBUG_SCRIPT (0x0040) 312 #define DEBUG_TINY (0x0080) 313 #define DEBUG_TIMING (0x0100) 314 #define DEBUG_NEGO (0x0200) 315 #define DEBUG_TAGS (0x0400) 316 #define DEBUG_POINTER (0x0800) 317 318 #if 0 319 static int sym_debug = 0; 320 #define DEBUG_FLAGS sym_debug 321 #else 322 /* #define DEBUG_FLAGS (0x0631) */ 323 #define DEBUG_FLAGS (0x0000) 324 325 #endif 326 #define sym_verbose (np->verbose) 327 328 /* 329 * Insert a delay in micro-seconds and milli-seconds. 330 */ 331 static void UDELAY(int us) { DELAY(us); } 332 static void MDELAY(int ms) { while (ms--) UDELAY(1000); } 333 334 /* 335 * Simple power of two buddy-like allocator. 336 * 337 * This simple code is not intended to be fast, but to 338 * provide power of 2 aligned memory allocations. 339 * Since the SCRIPTS processor only supplies 8 bit arithmetic, 340 * this allocator allows simple and fast address calculations 341 * from the SCRIPTS code. In addition, cache line alignment 342 * is guaranteed for power of 2 cache line size. 343 * 344 * This allocator has been developed for the Linux sym53c8xx 345 * driver, since this O/S does not provide naturally aligned 346 * allocations. 347 * It has the advantage of allowing the driver to use private 348 * pages of memory that will be useful if we ever need to deal 349 * with IO MMUs for PCI. 350 */ 351 #define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ 352 #define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ 353 #if 0 354 #define MEMO_FREE_UNUSED /* Free unused pages immediately */ 355 #endif 356 #define MEMO_WARN 1 357 #define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) 358 #define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) 359 #define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) 360 361 #define get_pages() malloc(MEMO_CLUSTER_SIZE, M_DEVBUF, M_NOWAIT) 362 #define free_pages(p) free((p), M_DEVBUF) 363 364 typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ 365 366 typedef struct m_link { /* Link between free memory chunks */ 367 struct m_link *next; 368 } m_link_s; 369 370 typedef struct m_vtob { /* Virtual to Bus address translation */ 371 struct m_vtob *next; 372 bus_dmamap_t dmamap; /* Map for this chunk */ 373 m_addr_t vaddr; /* Virtual address */ 374 m_addr_t baddr; /* Bus physical address */ 375 } m_vtob_s; 376 /* Hash this stuff a bit to speed up translations */ 377 #define VTOB_HASH_SHIFT 5 378 #define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) 379 #define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) 380 #define VTOB_HASH_CODE(m) \ 381 ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) 382 383 typedef struct m_pool { /* Memory pool of a given kind */ 384 bus_dma_tag_t dev_dmat; /* Identifies the pool */ 385 bus_dma_tag_t dmat; /* Tag for our fixed allocations */ 386 m_addr_t (*getp)(struct m_pool *); 387 #ifdef MEMO_FREE_UNUSED 388 void (*freep)(struct m_pool *, m_addr_t); 389 #endif 390 #define M_GETP() mp->getp(mp) 391 #define M_FREEP(p) mp->freep(mp, p) 392 int nump; 393 m_vtob_s *(vtob[VTOB_HASH_SIZE]); 394 struct m_pool *next; 395 struct m_link h[MEMO_CLUSTER_SHIFT - MEMO_SHIFT + 1]; 396 } m_pool_s; 397 398 static void *___sym_malloc(m_pool_s *mp, int size) 399 { 400 int i = 0; 401 int s = (1 << MEMO_SHIFT); 402 int j; 403 m_addr_t a; 404 m_link_s *h = mp->h; 405 406 if (size > MEMO_CLUSTER_SIZE) 407 return NULL; 408 409 while (size > s) { 410 s <<= 1; 411 ++i; 412 } 413 414 j = i; 415 while (!h[j].next) { 416 if (s == MEMO_CLUSTER_SIZE) { 417 h[j].next = (m_link_s *) M_GETP(); 418 if (h[j].next) 419 h[j].next->next = NULL; 420 break; 421 } 422 ++j; 423 s <<= 1; 424 } 425 a = (m_addr_t) h[j].next; 426 if (a) { 427 h[j].next = h[j].next->next; 428 while (j > i) { 429 j -= 1; 430 s >>= 1; 431 h[j].next = (m_link_s *) (a+s); 432 h[j].next->next = NULL; 433 } 434 } 435 #ifdef DEBUG 436 printf("___sym_malloc(%d) = %p\n", size, (void *) a); 437 #endif 438 return (void *) a; 439 } 440 441 static void ___sym_mfree(m_pool_s *mp, void *ptr, int size) 442 { 443 int i = 0; 444 int s = (1 << MEMO_SHIFT); 445 m_link_s *q; 446 m_addr_t a, b; 447 m_link_s *h = mp->h; 448 449 #ifdef DEBUG 450 printf("___sym_mfree(%p, %d)\n", ptr, size); 451 #endif 452 453 if (size > MEMO_CLUSTER_SIZE) 454 return; 455 456 while (size > s) { 457 s <<= 1; 458 ++i; 459 } 460 461 a = (m_addr_t) ptr; 462 463 while (1) { 464 #ifdef MEMO_FREE_UNUSED 465 if (s == MEMO_CLUSTER_SIZE) { 466 M_FREEP(a); 467 break; 468 } 469 #endif 470 b = a ^ s; 471 q = &h[i]; 472 while (q->next && q->next != (m_link_s *) b) { 473 q = q->next; 474 } 475 if (!q->next) { 476 ((m_link_s *) a)->next = h[i].next; 477 h[i].next = (m_link_s *) a; 478 break; 479 } 480 q->next = q->next->next; 481 a = a & b; 482 s <<= 1; 483 ++i; 484 } 485 } 486 487 static void *__sym_calloc2(m_pool_s *mp, int size, char *name, int uflags) 488 { 489 void *p; 490 491 p = ___sym_malloc(mp, size); 492 493 if (DEBUG_FLAGS & DEBUG_ALLOC) 494 printf ("new %-10s[%4d] @%p.\n", name, size, p); 495 496 if (p) 497 bzero(p, size); 498 else if (uflags & MEMO_WARN) 499 printf ("__sym_calloc2: failed to allocate %s[%d]\n", name, size); 500 501 return p; 502 } 503 504 #define __sym_calloc(mp, s, n) __sym_calloc2(mp, s, n, MEMO_WARN) 505 506 static void __sym_mfree(m_pool_s *mp, void *ptr, int size, char *name) 507 { 508 if (DEBUG_FLAGS & DEBUG_ALLOC) 509 printf ("freeing %-10s[%4d] @%p.\n", name, size, ptr); 510 511 ___sym_mfree(mp, ptr, size); 512 513 } 514 515 /* 516 * Default memory pool we donnot need to involve in DMA. 517 */ 518 /* 519 * With the `bus dma abstraction', we use a separate pool for 520 * memory we donnot need to involve in DMA. 521 */ 522 static m_addr_t ___mp0_getp(m_pool_s *mp) 523 { 524 m_addr_t m = (m_addr_t) get_pages(); 525 if (m) 526 ++mp->nump; 527 return m; 528 } 529 530 #ifdef MEMO_FREE_UNUSED 531 static void ___mp0_freep(m_pool_s *mp, m_addr_t m) 532 { 533 free_pages(m); 534 --mp->nump; 535 } 536 #endif 537 538 #ifdef MEMO_FREE_UNUSED 539 static m_pool_s mp0 = {0, 0, ___mp0_getp, ___mp0_freep}; 540 #else 541 static m_pool_s mp0 = {0, 0, ___mp0_getp}; 542 #endif 543 544 /* 545 * Actual memory allocation routine for non-DMAed memory. 546 */ 547 static void *sym_calloc(int size, char *name) 548 { 549 void *m; 550 /* Lock */ 551 m = __sym_calloc(&mp0, size, name); 552 /* Unlock */ 553 return m; 554 } 555 556 /* 557 * Actual memory allocation routine for non-DMAed memory. 558 */ 559 static void sym_mfree(void *ptr, int size, char *name) 560 { 561 /* Lock */ 562 __sym_mfree(&mp0, ptr, size, name); 563 /* Unlock */ 564 } 565 566 /* 567 * DMAable pools. 568 */ 569 /* 570 * With `bus dma abstraction', we use a separate pool per parent 571 * BUS handle. A reverse table (hashed) is maintained for virtual 572 * to BUS address translation. 573 */ 574 static void getbaddrcb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 575 { 576 bus_addr_t *baddr; 577 578 KASSERT(nseg == 1, ("%s: too many DMA segments (%d)", __func__, nseg)); 579 580 baddr = (bus_addr_t *)arg; 581 if (error) 582 *baddr = 0; 583 else 584 *baddr = segs->ds_addr; 585 } 586 587 static m_addr_t ___dma_getp(m_pool_s *mp) 588 { 589 m_vtob_s *vbp; 590 void *vaddr = NULL; 591 bus_addr_t baddr = 0; 592 593 vbp = __sym_calloc(&mp0, sizeof(*vbp), "VTOB"); 594 if (!vbp) 595 goto out_err; 596 597 if (bus_dmamem_alloc(mp->dmat, &vaddr, 598 BUS_DMA_COHERENT | BUS_DMA_WAITOK, &vbp->dmamap)) 599 goto out_err; 600 bus_dmamap_load(mp->dmat, vbp->dmamap, vaddr, 601 MEMO_CLUSTER_SIZE, getbaddrcb, &baddr, BUS_DMA_NOWAIT); 602 if (baddr) { 603 int hc = VTOB_HASH_CODE(vaddr); 604 vbp->vaddr = (m_addr_t) vaddr; 605 vbp->baddr = (m_addr_t) baddr; 606 vbp->next = mp->vtob[hc]; 607 mp->vtob[hc] = vbp; 608 ++mp->nump; 609 return (m_addr_t) vaddr; 610 } 611 out_err: 612 if (vaddr) 613 bus_dmamem_free(mp->dmat, vaddr, vbp->dmamap); 614 if (vbp) 615 __sym_mfree(&mp0, vbp, sizeof(*vbp), "VTOB"); 616 return 0; 617 } 618 619 #ifdef MEMO_FREE_UNUSED 620 static void ___dma_freep(m_pool_s *mp, m_addr_t m) 621 { 622 m_vtob_s **vbpp, *vbp; 623 int hc = VTOB_HASH_CODE(m); 624 625 vbpp = &mp->vtob[hc]; 626 while (*vbpp && (*vbpp)->vaddr != m) 627 vbpp = &(*vbpp)->next; 628 if (*vbpp) { 629 vbp = *vbpp; 630 *vbpp = (*vbpp)->next; 631 bus_dmamap_unload(mp->dmat, vbp->dmamap); 632 bus_dmamem_free(mp->dmat, (void *) vbp->vaddr, vbp->dmamap); 633 __sym_mfree(&mp0, vbp, sizeof(*vbp), "VTOB"); 634 --mp->nump; 635 } 636 } 637 #endif 638 639 static __inline m_pool_s *___get_dma_pool(bus_dma_tag_t dev_dmat) 640 { 641 m_pool_s *mp; 642 for (mp = mp0.next; mp && mp->dev_dmat != dev_dmat; mp = mp->next); 643 return mp; 644 } 645 646 static m_pool_s *___cre_dma_pool(bus_dma_tag_t dev_dmat) 647 { 648 m_pool_s *mp = NULL; 649 650 mp = __sym_calloc(&mp0, sizeof(*mp), "MPOOL"); 651 if (mp) { 652 mp->dev_dmat = dev_dmat; 653 if (!bus_dma_tag_create(dev_dmat, 1, MEMO_CLUSTER_SIZE, 654 BUS_SPACE_MAXADDR_32BIT, 655 BUS_SPACE_MAXADDR, 656 NULL, NULL, MEMO_CLUSTER_SIZE, 1, 657 MEMO_CLUSTER_SIZE, 0, 658 NULL, NULL, &mp->dmat)) { 659 mp->getp = ___dma_getp; 660 #ifdef MEMO_FREE_UNUSED 661 mp->freep = ___dma_freep; 662 #endif 663 mp->next = mp0.next; 664 mp0.next = mp; 665 return mp; 666 } 667 } 668 if (mp) 669 __sym_mfree(&mp0, mp, sizeof(*mp), "MPOOL"); 670 return NULL; 671 } 672 673 #ifdef MEMO_FREE_UNUSED 674 static void ___del_dma_pool(m_pool_s *p) 675 { 676 struct m_pool **pp = &mp0.next; 677 678 while (*pp && *pp != p) 679 pp = &(*pp)->next; 680 if (*pp) { 681 *pp = (*pp)->next; 682 bus_dma_tag_destroy(p->dmat); 683 __sym_mfree(&mp0, p, sizeof(*p), "MPOOL"); 684 } 685 } 686 #endif 687 688 static void *__sym_calloc_dma(bus_dma_tag_t dev_dmat, int size, char *name) 689 { 690 struct m_pool *mp; 691 void *m = NULL; 692 693 /* Lock */ 694 mp = ___get_dma_pool(dev_dmat); 695 if (!mp) 696 mp = ___cre_dma_pool(dev_dmat); 697 if (mp) 698 m = __sym_calloc(mp, size, name); 699 #ifdef MEMO_FREE_UNUSED 700 if (mp && !mp->nump) 701 ___del_dma_pool(mp); 702 #endif 703 /* Unlock */ 704 705 return m; 706 } 707 708 static void 709 __sym_mfree_dma(bus_dma_tag_t dev_dmat, void *m, int size, char *name) 710 { 711 struct m_pool *mp; 712 713 /* Lock */ 714 mp = ___get_dma_pool(dev_dmat); 715 if (mp) 716 __sym_mfree(mp, m, size, name); 717 #ifdef MEMO_FREE_UNUSED 718 if (mp && !mp->nump) 719 ___del_dma_pool(mp); 720 #endif 721 /* Unlock */ 722 } 723 724 static m_addr_t __vtobus(bus_dma_tag_t dev_dmat, void *m) 725 { 726 m_pool_s *mp; 727 int hc = VTOB_HASH_CODE(m); 728 m_vtob_s *vp = NULL; 729 m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; 730 731 /* Lock */ 732 mp = ___get_dma_pool(dev_dmat); 733 if (mp) { 734 vp = mp->vtob[hc]; 735 while (vp && (m_addr_t) vp->vaddr != a) 736 vp = vp->next; 737 } 738 /* Unlock */ 739 if (!vp) 740 panic("sym: VTOBUS FAILED!\n"); 741 return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; 742 } 743 744 /* 745 * Verbs for DMAable memory handling. 746 * The _uvptv_ macro avoids a nasty warning about pointer to volatile 747 * being discarded. 748 */ 749 #define _uvptv_(p) ((void *)((vm_offset_t)(p))) 750 #define _sym_calloc_dma(np, s, n) __sym_calloc_dma(np->bus_dmat, s, n) 751 #define _sym_mfree_dma(np, p, s, n) \ 752 __sym_mfree_dma(np->bus_dmat, _uvptv_(p), s, n) 753 #define sym_calloc_dma(s, n) _sym_calloc_dma(np, s, n) 754 #define sym_mfree_dma(p, s, n) _sym_mfree_dma(np, p, s, n) 755 #define _vtobus(np, p) __vtobus(np->bus_dmat, _uvptv_(p)) 756 #define vtobus(p) _vtobus(np, p) 757 758 /* 759 * Print a buffer in hexadecimal format. 760 */ 761 static void sym_printb_hex (u_char *p, int n) 762 { 763 while (n-- > 0) 764 printf (" %x", *p++); 765 } 766 767 /* 768 * Same with a label at beginning and .\n at end. 769 */ 770 static void sym_printl_hex (char *label, u_char *p, int n) 771 { 772 printf ("%s", label); 773 sym_printb_hex (p, n); 774 printf (".\n"); 775 } 776 777 /* 778 * Return a string for SCSI BUS mode. 779 */ 780 static const char *sym_scsi_bus_mode(int mode) 781 { 782 switch(mode) { 783 case SMODE_HVD: return "HVD"; 784 case SMODE_SE: return "SE"; 785 case SMODE_LVD: return "LVD"; 786 } 787 return "??"; 788 } 789 790 /* 791 * Some poor and bogus sync table that refers to Tekram NVRAM layout. 792 */ 793 #ifdef SYM_CONF_NVRAM_SUPPORT 794 static const u_char Tekram_sync[16] = 795 {25,31,37,43, 50,62,75,125, 12,15,18,21, 6,7,9,10}; 796 #endif 797 798 /* 799 * Union of supported NVRAM formats. 800 */ 801 struct sym_nvram { 802 int type; 803 #define SYM_SYMBIOS_NVRAM (1) 804 #define SYM_TEKRAM_NVRAM (2) 805 #ifdef SYM_CONF_NVRAM_SUPPORT 806 union { 807 Symbios_nvram Symbios; 808 Tekram_nvram Tekram; 809 } data; 810 #endif 811 }; 812 813 /* 814 * This one is hopefully useless, but actually useful. :-) 815 */ 816 #ifndef assert 817 #define assert(expression) { \ 818 if (!(expression)) { \ 819 (void)panic( \ 820 "assertion \"%s\" failed: file \"%s\", line %d\n", \ 821 #expression, \ 822 __FILE__, __LINE__); \ 823 } \ 824 } 825 #endif 826 827 /* 828 * Some provision for a possible big endian mode supported by 829 * Symbios chips (never seen, by the way). 830 * For now, this stuff does not deserve any comments. :) 831 */ 832 #define sym_offb(o) (o) 833 #define sym_offw(o) (o) 834 835 /* 836 * Some provision for support for BIG ENDIAN CPU. 837 */ 838 #define cpu_to_scr(dw) htole32(dw) 839 #define scr_to_cpu(dw) le32toh(dw) 840 841 /* 842 * Access to the chip IO registers and on-chip RAM. 843 * We use the `bus space' interface under FreeBSD-4 and 844 * later kernel versions. 845 */ 846 #if defined(SYM_CONF_IOMAPPED) 847 848 #define INB_OFF(o) bus_read_1(np->io_res, (o)) 849 #define INW_OFF(o) bus_read_2(np->io_res, (o)) 850 #define INL_OFF(o) bus_read_4(np->io_res, (o)) 851 852 #define OUTB_OFF(o, v) bus_write_1(np->io_res, (o), (v)) 853 #define OUTW_OFF(o, v) bus_write_2(np->io_res, (o), (v)) 854 #define OUTL_OFF(o, v) bus_write_4(np->io_res, (o), (v)) 855 856 #else /* Memory mapped IO */ 857 858 #define INB_OFF(o) bus_read_1(np->mmio_res, (o)) 859 #define INW_OFF(o) bus_read_2(np->mmio_res, (o)) 860 #define INL_OFF(o) bus_read_4(np->mmio_res, (o)) 861 862 #define OUTB_OFF(o, v) bus_write_1(np->mmio_res, (o), (v)) 863 #define OUTW_OFF(o, v) bus_write_2(np->mmio_res, (o), (v)) 864 #define OUTL_OFF(o, v) bus_write_4(np->mmio_res, (o), (v)) 865 866 #endif /* SYM_CONF_IOMAPPED */ 867 868 #define OUTRAM_OFF(o, a, l) \ 869 bus_write_region_1(np->ram_res, (o), (a), (l)) 870 871 /* 872 * Common definitions for both bus space and legacy IO methods. 873 */ 874 #define INB(r) INB_OFF(offsetof(struct sym_reg,r)) 875 #define INW(r) INW_OFF(offsetof(struct sym_reg,r)) 876 #define INL(r) INL_OFF(offsetof(struct sym_reg,r)) 877 878 #define OUTB(r, v) OUTB_OFF(offsetof(struct sym_reg,r), (v)) 879 #define OUTW(r, v) OUTW_OFF(offsetof(struct sym_reg,r), (v)) 880 #define OUTL(r, v) OUTL_OFF(offsetof(struct sym_reg,r), (v)) 881 882 #define OUTONB(r, m) OUTB(r, INB(r) | (m)) 883 #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) 884 #define OUTONW(r, m) OUTW(r, INW(r) | (m)) 885 #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) 886 #define OUTONL(r, m) OUTL(r, INL(r) | (m)) 887 #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) 888 889 /* 890 * We normally want the chip to have a consistent view 891 * of driver internal data structures when we restart it. 892 * Thus these macros. 893 */ 894 #define OUTL_DSP(v) \ 895 do { \ 896 MEMORY_BARRIER(); \ 897 OUTL (nc_dsp, (v)); \ 898 } while (0) 899 900 #define OUTONB_STD() \ 901 do { \ 902 MEMORY_BARRIER(); \ 903 OUTONB (nc_dcntl, (STD|NOCOM)); \ 904 } while (0) 905 906 /* 907 * Command control block states. 908 */ 909 #define HS_IDLE (0) 910 #define HS_BUSY (1) 911 #define HS_NEGOTIATE (2) /* sync/wide data transfer*/ 912 #define HS_DISCONNECT (3) /* Disconnected by target */ 913 #define HS_WAIT (4) /* waiting for resource */ 914 915 #define HS_DONEMASK (0x80) 916 #define HS_COMPLETE (4|HS_DONEMASK) 917 #define HS_SEL_TIMEOUT (5|HS_DONEMASK) /* Selection timeout */ 918 #define HS_UNEXPECTED (6|HS_DONEMASK) /* Unexpected disconnect */ 919 #define HS_COMP_ERR (7|HS_DONEMASK) /* Completed with error */ 920 921 /* 922 * Software Interrupt Codes 923 */ 924 #define SIR_BAD_SCSI_STATUS (1) 925 #define SIR_SEL_ATN_NO_MSG_OUT (2) 926 #define SIR_MSG_RECEIVED (3) 927 #define SIR_MSG_WEIRD (4) 928 #define SIR_NEGO_FAILED (5) 929 #define SIR_NEGO_PROTO (6) 930 #define SIR_SCRIPT_STOPPED (7) 931 #define SIR_REJECT_TO_SEND (8) 932 #define SIR_SWIDE_OVERRUN (9) 933 #define SIR_SODL_UNDERRUN (10) 934 #define SIR_RESEL_NO_MSG_IN (11) 935 #define SIR_RESEL_NO_IDENTIFY (12) 936 #define SIR_RESEL_BAD_LUN (13) 937 #define SIR_TARGET_SELECTED (14) 938 #define SIR_RESEL_BAD_I_T_L (15) 939 #define SIR_RESEL_BAD_I_T_L_Q (16) 940 #define SIR_ABORT_SENT (17) 941 #define SIR_RESEL_ABORTED (18) 942 #define SIR_MSG_OUT_DONE (19) 943 #define SIR_COMPLETE_ERROR (20) 944 #define SIR_DATA_OVERRUN (21) 945 #define SIR_BAD_PHASE (22) 946 #define SIR_MAX (22) 947 948 /* 949 * Extended error bit codes. 950 * xerr_status field of struct sym_ccb. 951 */ 952 #define XE_EXTRA_DATA (1) /* unexpected data phase */ 953 #define XE_BAD_PHASE (1<<1) /* illegal phase (4/5) */ 954 #define XE_PARITY_ERR (1<<2) /* unrecovered SCSI parity error */ 955 #define XE_SODL_UNRUN (1<<3) /* ODD transfer in DATA OUT phase */ 956 #define XE_SWIDE_OVRUN (1<<4) /* ODD transfer in DATA IN phase */ 957 958 /* 959 * Negotiation status. 960 * nego_status field of struct sym_ccb. 961 */ 962 #define NS_SYNC (1) 963 #define NS_WIDE (2) 964 #define NS_PPR (3) 965 966 /* 967 * A CCB hashed table is used to retrieve CCB address 968 * from DSA value. 969 */ 970 #define CCB_HASH_SHIFT 8 971 #define CCB_HASH_SIZE (1UL << CCB_HASH_SHIFT) 972 #define CCB_HASH_MASK (CCB_HASH_SIZE-1) 973 #define CCB_HASH_CODE(dsa) (((dsa) >> 9) & CCB_HASH_MASK) 974 975 /* 976 * Device flags. 977 */ 978 #define SYM_DISC_ENABLED (1) 979 #define SYM_TAGS_ENABLED (1<<1) 980 #define SYM_SCAN_BOOT_DISABLED (1<<2) 981 #define SYM_SCAN_LUNS_DISABLED (1<<3) 982 983 /* 984 * Host adapter miscellaneous flags. 985 */ 986 #define SYM_AVOID_BUS_RESET (1) 987 #define SYM_SCAN_TARGETS_HILO (1<<1) 988 989 /* 990 * Device quirks. 991 * Some devices, for example the CHEETAH 2 LVD, disconnects without 992 * saving the DATA POINTER then reselects and terminates the IO. 993 * On reselection, the automatic RESTORE DATA POINTER makes the 994 * CURRENT DATA POINTER not point at the end of the IO. 995 * This behaviour just breaks our calculation of the residual. 996 * For now, we just force an AUTO SAVE on disconnection and will 997 * fix that in a further driver version. 998 */ 999 #define SYM_QUIRK_AUTOSAVE 1 1000 1001 /* 1002 * Misc. 1003 */ 1004 #define SYM_LOCK() mtx_lock(&np->mtx) 1005 #define SYM_LOCK_ASSERT(_what) mtx_assert(&np->mtx, (_what)) 1006 #define SYM_LOCK_DESTROY() mtx_destroy(&np->mtx) 1007 #define SYM_LOCK_INIT() mtx_init(&np->mtx, "sym_lock", NULL, MTX_DEF) 1008 #define SYM_LOCK_INITIALIZED() mtx_initialized(&np->mtx) 1009 #define SYM_UNLOCK() mtx_unlock(&np->mtx) 1010 1011 #define SYM_SNOOP_TIMEOUT (10000000) 1012 #define SYM_PCI_IO PCIR_BAR(0) 1013 #define SYM_PCI_MMIO PCIR_BAR(1) 1014 #define SYM_PCI_RAM PCIR_BAR(2) 1015 #define SYM_PCI_RAM64 PCIR_BAR(3) 1016 1017 /* 1018 * Back-pointer from the CAM CCB to our data structures. 1019 */ 1020 #define sym_hcb_ptr spriv_ptr0 1021 /* #define sym_ccb_ptr spriv_ptr1 */ 1022 1023 /* 1024 * We mostly have to deal with pointers. 1025 * Thus these typedef's. 1026 */ 1027 typedef struct sym_tcb *tcb_p; 1028 typedef struct sym_lcb *lcb_p; 1029 typedef struct sym_ccb *ccb_p; 1030 typedef struct sym_hcb *hcb_p; 1031 1032 /* 1033 * Gather negotiable parameters value 1034 */ 1035 struct sym_trans { 1036 u8 scsi_version; 1037 u8 spi_version; 1038 u8 period; 1039 u8 offset; 1040 u8 width; 1041 u8 options; /* PPR options */ 1042 }; 1043 1044 struct sym_tinfo { 1045 struct sym_trans current; 1046 struct sym_trans goal; 1047 struct sym_trans user; 1048 }; 1049 1050 #define BUS_8_BIT MSG_EXT_WDTR_BUS_8_BIT 1051 #define BUS_16_BIT MSG_EXT_WDTR_BUS_16_BIT 1052 1053 /* 1054 * Global TCB HEADER. 1055 * 1056 * Due to lack of indirect addressing on earlier NCR chips, 1057 * this substructure is copied from the TCB to a global 1058 * address after selection. 1059 * For SYMBIOS chips that support LOAD/STORE this copy is 1060 * not needed and thus not performed. 1061 */ 1062 struct sym_tcbh { 1063 /* 1064 * Scripts bus addresses of LUN table accessed from scripts. 1065 * LUN #0 is a special case, since multi-lun devices are rare, 1066 * and we we want to speed-up the general case and not waste 1067 * resources. 1068 */ 1069 u32 luntbl_sa; /* bus address of this table */ 1070 u32 lun0_sa; /* bus address of LCB #0 */ 1071 /* 1072 * Actual SYNC/WIDE IO registers value for this target. 1073 * 'sval', 'wval' and 'uval' are read from SCRIPTS and 1074 * so have alignment constraints. 1075 */ 1076 /*0*/ u_char uval; /* -> SCNTL4 register */ 1077 /*1*/ u_char sval; /* -> SXFER io register */ 1078 /*2*/ u_char filler1; 1079 /*3*/ u_char wval; /* -> SCNTL3 io register */ 1080 }; 1081 1082 /* 1083 * Target Control Block 1084 */ 1085 struct sym_tcb { 1086 /* 1087 * TCB header. 1088 * Assumed at offset 0. 1089 */ 1090 /*0*/ struct sym_tcbh head; 1091 1092 /* 1093 * LUN table used by the SCRIPTS processor. 1094 * An array of bus addresses is used on reselection. 1095 */ 1096 u32 *luntbl; /* LCBs bus address table */ 1097 1098 /* 1099 * LUN table used by the C code. 1100 */ 1101 lcb_p lun0p; /* LCB of LUN #0 (usual case) */ 1102 #if SYM_CONF_MAX_LUN > 1 1103 lcb_p *lunmp; /* Other LCBs [1..MAX_LUN] */ 1104 #endif 1105 1106 /* 1107 * Bitmap that tells about LUNs that succeeded at least 1108 * 1 IO and therefore assumed to be a real device. 1109 * Avoid useless allocation of the LCB structure. 1110 */ 1111 u32 lun_map[(SYM_CONF_MAX_LUN+31)/32]; 1112 1113 /* 1114 * Bitmap that tells about LUNs that haven't yet an LCB 1115 * allocated (not discovered or LCB allocation failed). 1116 */ 1117 u32 busy0_map[(SYM_CONF_MAX_LUN+31)/32]; 1118 1119 /* 1120 * Transfer capabilities (SIP) 1121 */ 1122 struct sym_tinfo tinfo; 1123 1124 /* 1125 * Keep track of the CCB used for the negotiation in order 1126 * to ensure that only 1 negotiation is queued at a time. 1127 */ 1128 ccb_p nego_cp; /* CCB used for the nego */ 1129 1130 /* 1131 * Set when we want to reset the device. 1132 */ 1133 u_char to_reset; 1134 1135 /* 1136 * Other user settable limits and options. 1137 * These limits are read from the NVRAM if present. 1138 */ 1139 u_char usrflags; 1140 u_short usrtags; 1141 }; 1142 1143 /* 1144 * Assert some alignments required by the chip. 1145 */ 1146 CTASSERT(((offsetof(struct sym_reg, nc_sxfer) ^ 1147 offsetof(struct sym_tcb, head.sval)) &3) == 0); 1148 CTASSERT(((offsetof(struct sym_reg, nc_scntl3) ^ 1149 offsetof(struct sym_tcb, head.wval)) &3) == 0); 1150 1151 /* 1152 * Global LCB HEADER. 1153 * 1154 * Due to lack of indirect addressing on earlier NCR chips, 1155 * this substructure is copied from the LCB to a global 1156 * address after selection. 1157 * For SYMBIOS chips that support LOAD/STORE this copy is 1158 * not needed and thus not performed. 1159 */ 1160 struct sym_lcbh { 1161 /* 1162 * SCRIPTS address jumped by SCRIPTS on reselection. 1163 * For not probed logical units, this address points to 1164 * SCRIPTS that deal with bad LU handling (must be at 1165 * offset zero of the LCB for that reason). 1166 */ 1167 /*0*/ u32 resel_sa; 1168 1169 /* 1170 * Task (bus address of a CCB) read from SCRIPTS that points 1171 * to the unique ITL nexus allowed to be disconnected. 1172 */ 1173 u32 itl_task_sa; 1174 1175 /* 1176 * Task table bus address (read from SCRIPTS). 1177 */ 1178 u32 itlq_tbl_sa; 1179 }; 1180 1181 /* 1182 * Logical Unit Control Block 1183 */ 1184 struct sym_lcb { 1185 /* 1186 * TCB header. 1187 * Assumed at offset 0. 1188 */ 1189 /*0*/ struct sym_lcbh head; 1190 1191 /* 1192 * Task table read from SCRIPTS that contains pointers to 1193 * ITLQ nexuses. The bus address read from SCRIPTS is 1194 * inside the header. 1195 */ 1196 u32 *itlq_tbl; /* Kernel virtual address */ 1197 1198 /* 1199 * Busy CCBs management. 1200 */ 1201 u_short busy_itlq; /* Number of busy tagged CCBs */ 1202 u_short busy_itl; /* Number of busy untagged CCBs */ 1203 1204 /* 1205 * Circular tag allocation buffer. 1206 */ 1207 u_short ia_tag; /* Tag allocation index */ 1208 u_short if_tag; /* Tag release index */ 1209 u_char *cb_tags; /* Circular tags buffer */ 1210 1211 /* 1212 * Set when we want to clear all tasks. 1213 */ 1214 u_char to_clear; 1215 1216 /* 1217 * Capabilities. 1218 */ 1219 u_char user_flags; 1220 u_char current_flags; 1221 }; 1222 1223 /* 1224 * Action from SCRIPTS on a task. 1225 * Is part of the CCB, but is also used separately to plug 1226 * error handling action to perform from SCRIPTS. 1227 */ 1228 struct sym_actscr { 1229 u32 start; /* Jumped by SCRIPTS after selection */ 1230 u32 restart; /* Jumped by SCRIPTS on relection */ 1231 }; 1232 1233 /* 1234 * Phase mismatch context. 1235 * 1236 * It is part of the CCB and is used as parameters for the 1237 * DATA pointer. We need two contexts to handle correctly the 1238 * SAVED DATA POINTER. 1239 */ 1240 struct sym_pmc { 1241 struct sym_tblmove sg; /* Updated interrupted SG block */ 1242 u32 ret; /* SCRIPT return address */ 1243 }; 1244 1245 /* 1246 * LUN control block lookup. 1247 * We use a direct pointer for LUN #0, and a table of 1248 * pointers which is only allocated for devices that support 1249 * LUN(s) > 0. 1250 */ 1251 #if SYM_CONF_MAX_LUN <= 1 1252 #define sym_lp(tp, lun) (!lun) ? (tp)->lun0p : 0 1253 #else 1254 #define sym_lp(tp, lun) \ 1255 (!lun) ? (tp)->lun0p : (tp)->lunmp ? (tp)->lunmp[(lun)] : 0 1256 #endif 1257 1258 /* 1259 * Status are used by the host and the script processor. 1260 * 1261 * The last four bytes (status[4]) are copied to the 1262 * scratchb register (declared as scr0..scr3) just after the 1263 * select/reselect, and copied back just after disconnecting. 1264 * Inside the script the XX_REG are used. 1265 */ 1266 1267 /* 1268 * Last four bytes (script) 1269 */ 1270 #define QU_REG scr0 1271 #define HS_REG scr1 1272 #define HS_PRT nc_scr1 1273 #define SS_REG scr2 1274 #define SS_PRT nc_scr2 1275 #define HF_REG scr3 1276 #define HF_PRT nc_scr3 1277 1278 /* 1279 * Last four bytes (host) 1280 */ 1281 #define actualquirks phys.head.status[0] 1282 #define host_status phys.head.status[1] 1283 #define ssss_status phys.head.status[2] 1284 #define host_flags phys.head.status[3] 1285 1286 /* 1287 * Host flags 1288 */ 1289 #define HF_IN_PM0 1u 1290 #define HF_IN_PM1 (1u<<1) 1291 #define HF_ACT_PM (1u<<2) 1292 #define HF_DP_SAVED (1u<<3) 1293 #define HF_SENSE (1u<<4) 1294 #define HF_EXT_ERR (1u<<5) 1295 #define HF_DATA_IN (1u<<6) 1296 #ifdef SYM_CONF_IARB_SUPPORT 1297 #define HF_HINT_IARB (1u<<7) 1298 #endif 1299 1300 /* 1301 * Global CCB HEADER. 1302 * 1303 * Due to lack of indirect addressing on earlier NCR chips, 1304 * this substructure is copied from the ccb to a global 1305 * address after selection (or reselection) and copied back 1306 * before disconnect. 1307 * For SYMBIOS chips that support LOAD/STORE this copy is 1308 * not needed and thus not performed. 1309 */ 1310 struct sym_ccbh { 1311 /* 1312 * Start and restart SCRIPTS addresses (must be at 0). 1313 */ 1314 /*0*/ struct sym_actscr go; 1315 1316 /* 1317 * SCRIPTS jump address that deal with data pointers. 1318 * 'savep' points to the position in the script responsible 1319 * for the actual transfer of data. 1320 * It's written on reception of a SAVE_DATA_POINTER message. 1321 */ 1322 u32 savep; /* Jump address to saved data pointer */ 1323 u32 lastp; /* SCRIPTS address at end of data */ 1324 u32 goalp; /* Not accessed for now from SCRIPTS */ 1325 1326 /* 1327 * Status fields. 1328 */ 1329 u8 status[4]; 1330 }; 1331 1332 /* 1333 * Data Structure Block 1334 * 1335 * During execution of a ccb by the script processor, the 1336 * DSA (data structure address) register points to this 1337 * substructure of the ccb. 1338 */ 1339 struct sym_dsb { 1340 /* 1341 * CCB header. 1342 * Also assumed at offset 0 of the sym_ccb structure. 1343 */ 1344 /*0*/ struct sym_ccbh head; 1345 1346 /* 1347 * Phase mismatch contexts. 1348 * We need two to handle correctly the SAVED DATA POINTER. 1349 * MUST BOTH BE AT OFFSET < 256, due to using 8 bit arithmetic 1350 * for address calculation from SCRIPTS. 1351 */ 1352 struct sym_pmc pm0; 1353 struct sym_pmc pm1; 1354 1355 /* 1356 * Table data for Script 1357 */ 1358 struct sym_tblsel select; 1359 struct sym_tblmove smsg; 1360 struct sym_tblmove smsg_ext; 1361 struct sym_tblmove cmd; 1362 struct sym_tblmove sense; 1363 struct sym_tblmove wresid; 1364 struct sym_tblmove data [SYM_CONF_MAX_SG]; 1365 }; 1366 1367 /* 1368 * Our Command Control Block 1369 */ 1370 struct sym_ccb { 1371 /* 1372 * This is the data structure which is pointed by the DSA 1373 * register when it is executed by the script processor. 1374 * It must be the first entry. 1375 */ 1376 struct sym_dsb phys; 1377 1378 /* 1379 * Pointer to CAM ccb and related stuff. 1380 */ 1381 struct callout ch; /* callout handle */ 1382 union ccb *cam_ccb; /* CAM scsiio ccb */ 1383 u8 cdb_buf[16]; /* Copy of CDB */ 1384 u8 *sns_bbuf; /* Bounce buffer for sense data */ 1385 #define SYM_SNS_BBUF_LEN sizeof(struct scsi_sense_data) 1386 int data_len; /* Total data length */ 1387 int segments; /* Number of SG segments */ 1388 1389 /* 1390 * Miscellaneous status'. 1391 */ 1392 u_char nego_status; /* Negotiation status */ 1393 u_char xerr_status; /* Extended error flags */ 1394 u32 extra_bytes; /* Extraneous bytes transferred */ 1395 1396 /* 1397 * Message areas. 1398 * We prepare a message to be sent after selection. 1399 * We may use a second one if the command is rescheduled 1400 * due to CHECK_CONDITION or COMMAND TERMINATED. 1401 * Contents are IDENTIFY and SIMPLE_TAG. 1402 * While negotiating sync or wide transfer, 1403 * a SDTR or WDTR message is appended. 1404 */ 1405 u_char scsi_smsg [12]; 1406 u_char scsi_smsg2[12]; 1407 1408 /* 1409 * Auto request sense related fields. 1410 */ 1411 u_char sensecmd[6]; /* Request Sense command */ 1412 u_char sv_scsi_status; /* Saved SCSI status */ 1413 u_char sv_xerr_status; /* Saved extended status */ 1414 int sv_resid; /* Saved residual */ 1415 1416 /* 1417 * Map for the DMA of user data. 1418 */ 1419 void *arg; /* Argument for some callback */ 1420 bus_dmamap_t dmamap; /* DMA map for user data */ 1421 u_char dmamapped; 1422 #define SYM_DMA_NONE 0 1423 #define SYM_DMA_READ 1 1424 #define SYM_DMA_WRITE 2 1425 /* 1426 * Other fields. 1427 */ 1428 u32 ccb_ba; /* BUS address of this CCB */ 1429 u_short tag; /* Tag for this transfer */ 1430 /* NO_TAG means no tag */ 1431 u_char target; 1432 u_char lun; 1433 ccb_p link_ccbh; /* Host adapter CCB hash chain */ 1434 SYM_QUEHEAD 1435 link_ccbq; /* Link to free/busy CCB queue */ 1436 u32 startp; /* Initial data pointer */ 1437 int ext_sg; /* Extreme data pointer, used */ 1438 int ext_ofs; /* to calculate the residual. */ 1439 u_char to_abort; /* Want this IO to be aborted */ 1440 }; 1441 1442 #define CCB_BA(cp,lbl) (cp->ccb_ba + offsetof(struct sym_ccb, lbl)) 1443 1444 /* 1445 * Host Control Block 1446 */ 1447 struct sym_hcb { 1448 struct mtx mtx; 1449 1450 /* 1451 * Global headers. 1452 * Due to poorness of addressing capabilities, earlier 1453 * chips (810, 815, 825) copy part of the data structures 1454 * (CCB, TCB and LCB) in fixed areas. 1455 */ 1456 #ifdef SYM_CONF_GENERIC_SUPPORT 1457 struct sym_ccbh ccb_head; 1458 struct sym_tcbh tcb_head; 1459 struct sym_lcbh lcb_head; 1460 #endif 1461 /* 1462 * Idle task and invalid task actions and 1463 * their bus addresses. 1464 */ 1465 struct sym_actscr idletask, notask, bad_itl, bad_itlq; 1466 vm_offset_t idletask_ba, notask_ba, bad_itl_ba, bad_itlq_ba; 1467 1468 /* 1469 * Dummy lun table to protect us against target 1470 * returning bad lun number on reselection. 1471 */ 1472 u32 *badluntbl; /* Table physical address */ 1473 u32 badlun_sa; /* SCRIPT handler BUS address */ 1474 1475 /* 1476 * Bus address of this host control block. 1477 */ 1478 u32 hcb_ba; 1479 1480 /* 1481 * Bit 32-63 of the on-chip RAM bus address in LE format. 1482 * The START_RAM64 script loads the MMRS and MMWS from this 1483 * field. 1484 */ 1485 u32 scr_ram_seg; 1486 1487 /* 1488 * Chip and controller indentification. 1489 */ 1490 device_t device; 1491 1492 /* 1493 * Initial value of some IO register bits. 1494 * These values are assumed to have been set by BIOS, and may 1495 * be used to probe adapter implementation differences. 1496 */ 1497 u_char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest3, sv_ctest4, 1498 sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4, sv_scntl4, 1499 sv_stest1; 1500 1501 /* 1502 * Actual initial value of IO register bits used by the 1503 * driver. They are loaded at initialisation according to 1504 * features that are to be enabled/disabled. 1505 */ 1506 u_char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest3, rv_ctest4, 1507 rv_ctest5, rv_stest2, rv_ccntl0, rv_ccntl1, rv_scntl4; 1508 1509 /* 1510 * Target data. 1511 */ 1512 #ifdef __amd64__ 1513 struct sym_tcb *target; 1514 #else 1515 struct sym_tcb target[SYM_CONF_MAX_TARGET]; 1516 #endif 1517 1518 /* 1519 * Target control block bus address array used by the SCRIPT 1520 * on reselection. 1521 */ 1522 u32 *targtbl; 1523 u32 targtbl_ba; 1524 1525 /* 1526 * CAM SIM information for this instance. 1527 */ 1528 struct cam_sim *sim; 1529 struct cam_path *path; 1530 1531 /* 1532 * Allocated hardware resources. 1533 */ 1534 struct resource *irq_res; 1535 struct resource *io_res; 1536 struct resource *mmio_res; 1537 struct resource *ram_res; 1538 int ram_id; 1539 void *intr; 1540 1541 /* 1542 * Bus stuff. 1543 * 1544 * My understanding of PCI is that all agents must share the 1545 * same addressing range and model. 1546 * But some hardware architecture guys provide complex and 1547 * brain-deaded stuff that makes shit. 1548 * This driver only support PCI compliant implementations and 1549 * deals with part of the BUS stuff complexity only to fit O/S 1550 * requirements. 1551 */ 1552 1553 /* 1554 * DMA stuff. 1555 */ 1556 bus_dma_tag_t bus_dmat; /* DMA tag from parent BUS */ 1557 bus_dma_tag_t data_dmat; /* DMA tag for user data */ 1558 /* 1559 * BUS addresses of the chip 1560 */ 1561 vm_offset_t mmio_ba; /* MMIO BUS address */ 1562 int mmio_ws; /* MMIO Window size */ 1563 1564 vm_offset_t ram_ba; /* RAM BUS address */ 1565 int ram_ws; /* RAM window size */ 1566 1567 /* 1568 * SCRIPTS virtual and physical bus addresses. 1569 * 'script' is loaded in the on-chip RAM if present. 1570 * 'scripth' stays in main memory for all chips except the 1571 * 53C895A, 53C896 and 53C1010 that provide 8K on-chip RAM. 1572 */ 1573 u_char *scripta0; /* Copies of script and scripth */ 1574 u_char *scriptb0; /* Copies of script and scripth */ 1575 vm_offset_t scripta_ba; /* Actual script and scripth */ 1576 vm_offset_t scriptb_ba; /* bus addresses. */ 1577 vm_offset_t scriptb0_ba; 1578 u_short scripta_sz; /* Actual size of script A */ 1579 u_short scriptb_sz; /* Actual size of script B */ 1580 1581 /* 1582 * Bus addresses, setup and patch methods for 1583 * the selected firmware. 1584 */ 1585 struct sym_fwa_ba fwa_bas; /* Useful SCRIPTA bus addresses */ 1586 struct sym_fwb_ba fwb_bas; /* Useful SCRIPTB bus addresses */ 1587 void (*fw_setup)(hcb_p np, const struct sym_fw *fw); 1588 void (*fw_patch)(hcb_p np); 1589 const char *fw_name; 1590 1591 /* 1592 * General controller parameters and configuration. 1593 */ 1594 u_short device_id; /* PCI device id */ 1595 u_char revision_id; /* PCI device revision id */ 1596 u_int features; /* Chip features map */ 1597 u_char myaddr; /* SCSI id of the adapter */ 1598 u_char maxburst; /* log base 2 of dwords burst */ 1599 u_char maxwide; /* Maximum transfer width */ 1600 u_char minsync; /* Min sync period factor (ST) */ 1601 u_char maxsync; /* Max sync period factor (ST) */ 1602 u_char maxoffs; /* Max scsi offset (ST) */ 1603 u_char minsync_dt; /* Min sync period factor (DT) */ 1604 u_char maxsync_dt; /* Max sync period factor (DT) */ 1605 u_char maxoffs_dt; /* Max scsi offset (DT) */ 1606 u_char multiplier; /* Clock multiplier (1,2,4) */ 1607 u_char clock_divn; /* Number of clock divisors */ 1608 u32 clock_khz; /* SCSI clock frequency in KHz */ 1609 u32 pciclk_khz; /* Estimated PCI clock in KHz */ 1610 /* 1611 * Start queue management. 1612 * It is filled up by the host processor and accessed by the 1613 * SCRIPTS processor in order to start SCSI commands. 1614 */ 1615 volatile /* Prevent code optimizations */ 1616 u32 *squeue; /* Start queue virtual address */ 1617 u32 squeue_ba; /* Start queue BUS address */ 1618 u_short squeueput; /* Next free slot of the queue */ 1619 u_short actccbs; /* Number of allocated CCBs */ 1620 1621 /* 1622 * Command completion queue. 1623 * It is the same size as the start queue to avoid overflow. 1624 */ 1625 u_short dqueueget; /* Next position to scan */ 1626 volatile /* Prevent code optimizations */ 1627 u32 *dqueue; /* Completion (done) queue */ 1628 u32 dqueue_ba; /* Done queue BUS address */ 1629 1630 /* 1631 * Miscellaneous buffers accessed by the scripts-processor. 1632 * They shall be DWORD aligned, because they may be read or 1633 * written with a script command. 1634 */ 1635 u_char msgout[8]; /* Buffer for MESSAGE OUT */ 1636 u_char msgin [8]; /* Buffer for MESSAGE IN */ 1637 u32 lastmsg; /* Last SCSI message sent */ 1638 u_char scratch; /* Scratch for SCSI receive */ 1639 1640 /* 1641 * Miscellaneous configuration and status parameters. 1642 */ 1643 u_char usrflags; /* Miscellaneous user flags */ 1644 u_char scsi_mode; /* Current SCSI BUS mode */ 1645 u_char verbose; /* Verbosity for this controller*/ 1646 u32 cache; /* Used for cache test at init. */ 1647 1648 /* 1649 * CCB lists and queue. 1650 */ 1651 ccb_p ccbh[CCB_HASH_SIZE]; /* CCB hashed by DSA value */ 1652 SYM_QUEHEAD free_ccbq; /* Queue of available CCBs */ 1653 SYM_QUEHEAD busy_ccbq; /* Queue of busy CCBs */ 1654 1655 /* 1656 * During error handling and/or recovery, 1657 * active CCBs that are to be completed with 1658 * error or requeued are moved from the busy_ccbq 1659 * to the comp_ccbq prior to completion. 1660 */ 1661 SYM_QUEHEAD comp_ccbq; 1662 1663 /* 1664 * CAM CCB pending queue. 1665 */ 1666 SYM_QUEHEAD cam_ccbq; 1667 1668 /* 1669 * IMMEDIATE ARBITRATION (IARB) control. 1670 * 1671 * We keep track in 'last_cp' of the last CCB that has been 1672 * queued to the SCRIPTS processor and clear 'last_cp' when 1673 * this CCB completes. If last_cp is not zero at the moment 1674 * we queue a new CCB, we set a flag in 'last_cp' that is 1675 * used by the SCRIPTS as a hint for setting IARB. 1676 * We donnot set more than 'iarb_max' consecutive hints for 1677 * IARB in order to leave devices a chance to reselect. 1678 * By the way, any non zero value of 'iarb_max' is unfair. :) 1679 */ 1680 #ifdef SYM_CONF_IARB_SUPPORT 1681 u_short iarb_max; /* Max. # consecutive IARB hints*/ 1682 u_short iarb_count; /* Actual # of these hints */ 1683 ccb_p last_cp; 1684 #endif 1685 1686 /* 1687 * Command abort handling. 1688 * We need to synchronize tightly with the SCRIPTS 1689 * processor in order to handle things correctly. 1690 */ 1691 u_char abrt_msg[4]; /* Message to send buffer */ 1692 struct sym_tblmove abrt_tbl; /* Table for the MOV of it */ 1693 struct sym_tblsel abrt_sel; /* Sync params for selection */ 1694 u_char istat_sem; /* Tells the chip to stop (SEM) */ 1695 }; 1696 1697 #define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl)) 1698 1699 /* 1700 * Return the name of the controller. 1701 */ 1702 static __inline const char *sym_name(hcb_p np) 1703 { 1704 return device_get_nameunit(np->device); 1705 } 1706 1707 /*--------------------------------------------------------------------------*/ 1708 /*------------------------------ FIRMWARES ---------------------------------*/ 1709 /*--------------------------------------------------------------------------*/ 1710 1711 /* 1712 * This stuff will be moved to a separate source file when 1713 * the driver will be broken into several source modules. 1714 */ 1715 1716 /* 1717 * Macros used for all firmwares. 1718 */ 1719 #define SYM_GEN_A(s, label) ((short) offsetof(s, label)), 1720 #define SYM_GEN_B(s, label) ((short) offsetof(s, label)), 1721 #define PADDR_A(label) SYM_GEN_PADDR_A(struct SYM_FWA_SCR, label) 1722 #define PADDR_B(label) SYM_GEN_PADDR_B(struct SYM_FWB_SCR, label) 1723 1724 #ifdef SYM_CONF_GENERIC_SUPPORT 1725 /* 1726 * Allocate firmware #1 script area. 1727 */ 1728 #define SYM_FWA_SCR sym_fw1a_scr 1729 #define SYM_FWB_SCR sym_fw1b_scr 1730 #include <dev/sym/sym_fw1.h> 1731 static const struct sym_fwa_ofs sym_fw1a_ofs = { 1732 SYM_GEN_FW_A(struct SYM_FWA_SCR) 1733 }; 1734 static const struct sym_fwb_ofs sym_fw1b_ofs = { 1735 SYM_GEN_FW_B(struct SYM_FWB_SCR) 1736 }; 1737 #undef SYM_FWA_SCR 1738 #undef SYM_FWB_SCR 1739 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1740 1741 /* 1742 * Allocate firmware #2 script area. 1743 */ 1744 #define SYM_FWA_SCR sym_fw2a_scr 1745 #define SYM_FWB_SCR sym_fw2b_scr 1746 #include <dev/sym/sym_fw2.h> 1747 static const struct sym_fwa_ofs sym_fw2a_ofs = { 1748 SYM_GEN_FW_A(struct SYM_FWA_SCR) 1749 }; 1750 static const struct sym_fwb_ofs sym_fw2b_ofs = { 1751 SYM_GEN_FW_B(struct SYM_FWB_SCR) 1752 SYM_GEN_B(struct SYM_FWB_SCR, start64) 1753 SYM_GEN_B(struct SYM_FWB_SCR, pm_handle) 1754 }; 1755 #undef SYM_FWA_SCR 1756 #undef SYM_FWB_SCR 1757 1758 #undef SYM_GEN_A 1759 #undef SYM_GEN_B 1760 #undef PADDR_A 1761 #undef PADDR_B 1762 1763 #ifdef SYM_CONF_GENERIC_SUPPORT 1764 /* 1765 * Patch routine for firmware #1. 1766 */ 1767 static void 1768 sym_fw1_patch(hcb_p np) 1769 { 1770 struct sym_fw1a_scr *scripta0; 1771 struct sym_fw1b_scr *scriptb0; 1772 1773 scripta0 = (struct sym_fw1a_scr *) np->scripta0; 1774 scriptb0 = (struct sym_fw1b_scr *) np->scriptb0; 1775 1776 /* 1777 * Remove LED support if not needed. 1778 */ 1779 if (!(np->features & FE_LED0)) { 1780 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP); 1781 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP); 1782 scripta0->start[0] = cpu_to_scr(SCR_NO_OP); 1783 } 1784 1785 #ifdef SYM_CONF_IARB_SUPPORT 1786 /* 1787 * If user does not want to use IMMEDIATE ARBITRATION 1788 * when we are reselected while attempting to arbitrate, 1789 * patch the SCRIPTS accordingly with a SCRIPT NO_OP. 1790 */ 1791 if (!SYM_CONF_SET_IARB_ON_ARB_LOST) 1792 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP); 1793 #endif 1794 /* 1795 * Patch some data in SCRIPTS. 1796 * - start and done queue initial bus address. 1797 * - target bus address table bus address. 1798 */ 1799 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba); 1800 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba); 1801 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba); 1802 } 1803 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1804 1805 /* 1806 * Patch routine for firmware #2. 1807 */ 1808 static void 1809 sym_fw2_patch(hcb_p np) 1810 { 1811 struct sym_fw2a_scr *scripta0; 1812 struct sym_fw2b_scr *scriptb0; 1813 1814 scripta0 = (struct sym_fw2a_scr *) np->scripta0; 1815 scriptb0 = (struct sym_fw2b_scr *) np->scriptb0; 1816 1817 /* 1818 * Remove LED support if not needed. 1819 */ 1820 if (!(np->features & FE_LED0)) { 1821 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP); 1822 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP); 1823 scripta0->start[0] = cpu_to_scr(SCR_NO_OP); 1824 } 1825 1826 #ifdef SYM_CONF_IARB_SUPPORT 1827 /* 1828 * If user does not want to use IMMEDIATE ARBITRATION 1829 * when we are reselected while attempting to arbitrate, 1830 * patch the SCRIPTS accordingly with a SCRIPT NO_OP. 1831 */ 1832 if (!SYM_CONF_SET_IARB_ON_ARB_LOST) 1833 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP); 1834 #endif 1835 /* 1836 * Patch some variable in SCRIPTS. 1837 * - start and done queue initial bus address. 1838 * - target bus address table bus address. 1839 */ 1840 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba); 1841 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba); 1842 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba); 1843 1844 /* 1845 * Remove the load of SCNTL4 on reselection if not a C10. 1846 */ 1847 if (!(np->features & FE_C10)) { 1848 scripta0->resel_scntl4[0] = cpu_to_scr(SCR_NO_OP); 1849 scripta0->resel_scntl4[1] = cpu_to_scr(0); 1850 } 1851 1852 /* 1853 * Remove a couple of work-arounds specific to C1010 if 1854 * they are not desirable. See `sym_fw2.h' for more details. 1855 */ 1856 if (!(np->device_id == PCI_ID_LSI53C1010_2 && 1857 np->revision_id < 0x1 && 1858 np->pciclk_khz < 60000)) { 1859 scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP); 1860 scripta0->datao_phase[1] = cpu_to_scr(0); 1861 } 1862 if (!(np->device_id == PCI_ID_LSI53C1010 && 1863 /* np->revision_id < 0xff */ 1)) { 1864 scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP); 1865 scripta0->sel_done[1] = cpu_to_scr(0); 1866 } 1867 1868 /* 1869 * Patch some other variables in SCRIPTS. 1870 * These ones are loaded by the SCRIPTS processor. 1871 */ 1872 scriptb0->pm0_data_addr[0] = 1873 cpu_to_scr(np->scripta_ba + 1874 offsetof(struct sym_fw2a_scr, pm0_data)); 1875 scriptb0->pm1_data_addr[0] = 1876 cpu_to_scr(np->scripta_ba + 1877 offsetof(struct sym_fw2a_scr, pm1_data)); 1878 } 1879 1880 /* 1881 * Fill the data area in scripts. 1882 * To be done for all firmwares. 1883 */ 1884 static void 1885 sym_fw_fill_data (u32 *in, u32 *out) 1886 { 1887 int i; 1888 1889 for (i = 0; i < SYM_CONF_MAX_SG; i++) { 1890 *in++ = SCR_CHMOV_TBL ^ SCR_DATA_IN; 1891 *in++ = offsetof (struct sym_dsb, data[i]); 1892 *out++ = SCR_CHMOV_TBL ^ SCR_DATA_OUT; 1893 *out++ = offsetof (struct sym_dsb, data[i]); 1894 } 1895 } 1896 1897 /* 1898 * Setup useful script bus addresses. 1899 * To be done for all firmwares. 1900 */ 1901 static void 1902 sym_fw_setup_bus_addresses(hcb_p np, const struct sym_fw *fw) 1903 { 1904 u32 *pa; 1905 const u_short *po; 1906 int i; 1907 1908 /* 1909 * Build the bus address table for script A 1910 * from the script A offset table. 1911 */ 1912 po = (const u_short *) fw->a_ofs; 1913 pa = (u32 *) &np->fwa_bas; 1914 for (i = 0 ; i < sizeof(np->fwa_bas)/sizeof(u32) ; i++) 1915 pa[i] = np->scripta_ba + po[i]; 1916 1917 /* 1918 * Same for script B. 1919 */ 1920 po = (const u_short *) fw->b_ofs; 1921 pa = (u32 *) &np->fwb_bas; 1922 for (i = 0 ; i < sizeof(np->fwb_bas)/sizeof(u32) ; i++) 1923 pa[i] = np->scriptb_ba + po[i]; 1924 } 1925 1926 #ifdef SYM_CONF_GENERIC_SUPPORT 1927 /* 1928 * Setup routine for firmware #1. 1929 */ 1930 static void 1931 sym_fw1_setup(hcb_p np, const struct sym_fw *fw) 1932 { 1933 struct sym_fw1a_scr *scripta0; 1934 1935 scripta0 = (struct sym_fw1a_scr *) np->scripta0; 1936 1937 /* 1938 * Fill variable parts in scripts. 1939 */ 1940 sym_fw_fill_data(scripta0->data_in, scripta0->data_out); 1941 1942 /* 1943 * Setup bus addresses used from the C code.. 1944 */ 1945 sym_fw_setup_bus_addresses(np, fw); 1946 } 1947 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1948 1949 /* 1950 * Setup routine for firmware #2. 1951 */ 1952 static void 1953 sym_fw2_setup(hcb_p np, const struct sym_fw *fw) 1954 { 1955 struct sym_fw2a_scr *scripta0; 1956 1957 scripta0 = (struct sym_fw2a_scr *) np->scripta0; 1958 1959 /* 1960 * Fill variable parts in scripts. 1961 */ 1962 sym_fw_fill_data(scripta0->data_in, scripta0->data_out); 1963 1964 /* 1965 * Setup bus addresses used from the C code.. 1966 */ 1967 sym_fw_setup_bus_addresses(np, fw); 1968 } 1969 1970 /* 1971 * Allocate firmware descriptors. 1972 */ 1973 #ifdef SYM_CONF_GENERIC_SUPPORT 1974 static const struct sym_fw sym_fw1 = SYM_FW_ENTRY(sym_fw1, "NCR-generic"); 1975 #endif /* SYM_CONF_GENERIC_SUPPORT */ 1976 static const struct sym_fw sym_fw2 = SYM_FW_ENTRY(sym_fw2, "LOAD/STORE-based"); 1977 1978 /* 1979 * Find the most appropriate firmware for a chip. 1980 */ 1981 static const struct sym_fw * 1982 sym_find_firmware(const struct sym_pci_chip *chip) 1983 { 1984 if (chip->features & FE_LDSTR) 1985 return &sym_fw2; 1986 #ifdef SYM_CONF_GENERIC_SUPPORT 1987 else if (!(chip->features & (FE_PFEN|FE_NOPM|FE_DAC))) 1988 return &sym_fw1; 1989 #endif 1990 else 1991 return NULL; 1992 } 1993 1994 /* 1995 * Bind a script to physical addresses. 1996 */ 1997 static void sym_fw_bind_script (hcb_p np, u32 *start, int len) 1998 { 1999 u32 opcode, new, old, tmp1, tmp2; 2000 u32 *end, *cur; 2001 int relocs; 2002 2003 cur = start; 2004 end = start + len/4; 2005 2006 while (cur < end) { 2007 opcode = *cur; 2008 2009 /* 2010 * If we forget to change the length 2011 * in scripts, a field will be 2012 * padded with 0. This is an illegal 2013 * command. 2014 */ 2015 if (opcode == 0) { 2016 printf ("%s: ERROR0 IN SCRIPT at %d.\n", 2017 sym_name(np), (int) (cur-start)); 2018 MDELAY (10000); 2019 ++cur; 2020 continue; 2021 } 2022 2023 /* 2024 * We use the bogus value 0xf00ff00f ;-) 2025 * to reserve data area in SCRIPTS. 2026 */ 2027 if (opcode == SCR_DATA_ZERO) { 2028 *cur++ = 0; 2029 continue; 2030 } 2031 2032 if (DEBUG_FLAGS & DEBUG_SCRIPT) 2033 printf ("%d: <%x>\n", (int) (cur-start), 2034 (unsigned)opcode); 2035 2036 /* 2037 * We don't have to decode ALL commands 2038 */ 2039 switch (opcode >> 28) { 2040 case 0xf: 2041 /* 2042 * LOAD / STORE DSA relative, don't relocate. 2043 */ 2044 relocs = 0; 2045 break; 2046 case 0xe: 2047 /* 2048 * LOAD / STORE absolute. 2049 */ 2050 relocs = 1; 2051 break; 2052 case 0xc: 2053 /* 2054 * COPY has TWO arguments. 2055 */ 2056 relocs = 2; 2057 tmp1 = cur[1]; 2058 tmp2 = cur[2]; 2059 if ((tmp1 ^ tmp2) & 3) { 2060 printf ("%s: ERROR1 IN SCRIPT at %d.\n", 2061 sym_name(np), (int) (cur-start)); 2062 MDELAY (10000); 2063 } 2064 /* 2065 * If PREFETCH feature not enabled, remove 2066 * the NO FLUSH bit if present. 2067 */ 2068 if ((opcode & SCR_NO_FLUSH) && 2069 !(np->features & FE_PFEN)) { 2070 opcode = (opcode & ~SCR_NO_FLUSH); 2071 } 2072 break; 2073 case 0x0: 2074 /* 2075 * MOVE/CHMOV (absolute address) 2076 */ 2077 if (!(np->features & FE_WIDE)) 2078 opcode = (opcode | OPC_MOVE); 2079 relocs = 1; 2080 break; 2081 case 0x1: 2082 /* 2083 * MOVE/CHMOV (table indirect) 2084 */ 2085 if (!(np->features & FE_WIDE)) 2086 opcode = (opcode | OPC_MOVE); 2087 relocs = 0; 2088 break; 2089 case 0x8: 2090 /* 2091 * JUMP / CALL 2092 * dont't relocate if relative :-) 2093 */ 2094 if (opcode & 0x00800000) 2095 relocs = 0; 2096 else if ((opcode & 0xf8400000) == 0x80400000)/*JUMP64*/ 2097 relocs = 2; 2098 else 2099 relocs = 1; 2100 break; 2101 case 0x4: 2102 case 0x5: 2103 case 0x6: 2104 case 0x7: 2105 relocs = 1; 2106 break; 2107 default: 2108 relocs = 0; 2109 break; 2110 } 2111 2112 /* 2113 * Scriptify:) the opcode. 2114 */ 2115 *cur++ = cpu_to_scr(opcode); 2116 2117 /* 2118 * If no relocation, assume 1 argument 2119 * and just scriptize:) it. 2120 */ 2121 if (!relocs) { 2122 *cur = cpu_to_scr(*cur); 2123 ++cur; 2124 continue; 2125 } 2126 2127 /* 2128 * Otherwise performs all needed relocations. 2129 */ 2130 while (relocs--) { 2131 old = *cur; 2132 2133 switch (old & RELOC_MASK) { 2134 case RELOC_REGISTER: 2135 new = (old & ~RELOC_MASK) + np->mmio_ba; 2136 break; 2137 case RELOC_LABEL_A: 2138 new = (old & ~RELOC_MASK) + np->scripta_ba; 2139 break; 2140 case RELOC_LABEL_B: 2141 new = (old & ~RELOC_MASK) + np->scriptb_ba; 2142 break; 2143 case RELOC_SOFTC: 2144 new = (old & ~RELOC_MASK) + np->hcb_ba; 2145 break; 2146 case 0: 2147 /* 2148 * Don't relocate a 0 address. 2149 * They are mostly used for patched or 2150 * script self-modified areas. 2151 */ 2152 if (old == 0) { 2153 new = old; 2154 break; 2155 } 2156 /* fall through */ 2157 default: 2158 new = 0; 2159 panic("sym_fw_bind_script: " 2160 "weird relocation %x\n", old); 2161 break; 2162 } 2163 2164 *cur++ = cpu_to_scr(new); 2165 } 2166 } 2167 } 2168 2169 /*---------------------------------------------------------------------------*/ 2170 /*--------------------------- END OF FIRMWARES -----------------------------*/ 2171 /*---------------------------------------------------------------------------*/ 2172 2173 /* 2174 * Function prototypes. 2175 */ 2176 static void sym_save_initial_setting (hcb_p np); 2177 static int sym_prepare_setting (hcb_p np, struct sym_nvram *nvram); 2178 static int sym_prepare_nego (hcb_p np, ccb_p cp, int nego, u_char *msgptr); 2179 static void sym_put_start_queue (hcb_p np, ccb_p cp); 2180 static void sym_chip_reset (hcb_p np); 2181 static void sym_soft_reset (hcb_p np); 2182 static void sym_start_reset (hcb_p np); 2183 static int sym_reset_scsi_bus (hcb_p np, int enab_int); 2184 static int sym_wakeup_done (hcb_p np); 2185 static void sym_flush_busy_queue (hcb_p np, int cam_status); 2186 static void sym_flush_comp_queue (hcb_p np, int cam_status); 2187 static void sym_init (hcb_p np, int reason); 2188 static int sym_getsync(hcb_p np, u_char dt, u_char sfac, u_char *divp, 2189 u_char *fakp); 2190 static void sym_setsync (hcb_p np, ccb_p cp, u_char ofs, u_char per, 2191 u_char div, u_char fak); 2192 static void sym_setwide (hcb_p np, ccb_p cp, u_char wide); 2193 static void sym_setpprot(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 2194 u_char per, u_char wide, u_char div, u_char fak); 2195 static void sym_settrans(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 2196 u_char per, u_char wide, u_char div, u_char fak); 2197 static void sym_log_hard_error (hcb_p np, u_short sist, u_char dstat); 2198 static void sym_intr (void *arg); 2199 static void sym_poll (struct cam_sim *sim); 2200 static void sym_recover_scsi_int (hcb_p np, u_char hsts); 2201 static void sym_int_sto (hcb_p np); 2202 static void sym_int_udc (hcb_p np); 2203 static void sym_int_sbmc (hcb_p np); 2204 static void sym_int_par (hcb_p np, u_short sist); 2205 static void sym_int_ma (hcb_p np); 2206 static int sym_dequeue_from_squeue(hcb_p np, int i, int target, int lun, 2207 int task); 2208 static void sym_sir_bad_scsi_status (hcb_p np, ccb_p cp); 2209 static int sym_clear_tasks (hcb_p np, int status, int targ, int lun, int task); 2210 static void sym_sir_task_recovery (hcb_p np, int num); 2211 static int sym_evaluate_dp (hcb_p np, ccb_p cp, u32 scr, int *ofs); 2212 static void sym_modify_dp(hcb_p np, ccb_p cp, int ofs); 2213 static int sym_compute_residual (hcb_p np, ccb_p cp); 2214 static int sym_show_msg (u_char * msg); 2215 static void sym_print_msg (ccb_p cp, char *label, u_char *msg); 2216 static void sym_sync_nego (hcb_p np, tcb_p tp, ccb_p cp); 2217 static void sym_ppr_nego (hcb_p np, tcb_p tp, ccb_p cp); 2218 static void sym_wide_nego (hcb_p np, tcb_p tp, ccb_p cp); 2219 static void sym_nego_default (hcb_p np, tcb_p tp, ccb_p cp); 2220 static void sym_nego_rejected (hcb_p np, tcb_p tp, ccb_p cp); 2221 static void sym_int_sir (hcb_p np); 2222 static void sym_free_ccb (hcb_p np, ccb_p cp); 2223 static ccb_p sym_get_ccb (hcb_p np, u_char tn, u_char ln, u_char tag_order); 2224 static ccb_p sym_alloc_ccb (hcb_p np); 2225 static ccb_p sym_ccb_from_dsa (hcb_p np, u32 dsa); 2226 static lcb_p sym_alloc_lcb (hcb_p np, u_char tn, u_char ln); 2227 static void sym_alloc_lcb_tags (hcb_p np, u_char tn, u_char ln); 2228 static int sym_snooptest (hcb_p np); 2229 static void sym_selectclock(hcb_p np, u_char scntl3); 2230 static void sym_getclock (hcb_p np, int mult); 2231 static int sym_getpciclock (hcb_p np); 2232 static void sym_complete_ok (hcb_p np, ccb_p cp); 2233 static void sym_complete_error (hcb_p np, ccb_p cp); 2234 static void sym_callout (void *arg); 2235 static int sym_abort_scsiio (hcb_p np, union ccb *ccb, int timed_out); 2236 static void sym_reset_dev (hcb_p np, union ccb *ccb); 2237 static void sym_action (struct cam_sim *sim, union ccb *ccb); 2238 static int sym_setup_cdb (hcb_p np, struct ccb_scsiio *csio, ccb_p cp); 2239 static void sym_setup_data_and_start (hcb_p np, struct ccb_scsiio *csio, 2240 ccb_p cp); 2241 static int sym_fast_scatter_sg_physical(hcb_p np, ccb_p cp, 2242 bus_dma_segment_t *psegs, int nsegs); 2243 static int sym_scatter_sg_physical (hcb_p np, ccb_p cp, 2244 bus_dma_segment_t *psegs, int nsegs); 2245 static void sym_action2 (struct cam_sim *sim, union ccb *ccb); 2246 static void sym_update_trans(hcb_p np, struct sym_trans *tip, 2247 struct ccb_trans_settings *cts); 2248 static void sym_update_dflags(hcb_p np, u_char *flags, 2249 struct ccb_trans_settings *cts); 2250 2251 static const struct sym_pci_chip *sym_find_pci_chip (device_t dev); 2252 static int sym_pci_probe (device_t dev); 2253 static int sym_pci_attach (device_t dev); 2254 2255 static void sym_pci_free (hcb_p np); 2256 static int sym_cam_attach (hcb_p np); 2257 static void sym_cam_free (hcb_p np); 2258 2259 static void sym_nvram_setup_host (hcb_p np, struct sym_nvram *nvram); 2260 static void sym_nvram_setup_target (hcb_p np, int targ, struct sym_nvram *nvp); 2261 static int sym_read_nvram (hcb_p np, struct sym_nvram *nvp); 2262 2263 /* 2264 * Print something which allows to retrieve the controller type, 2265 * unit, target, lun concerned by a kernel message. 2266 */ 2267 static void PRINT_TARGET (hcb_p np, int target) 2268 { 2269 printf ("%s:%d:", sym_name(np), target); 2270 } 2271 2272 static void PRINT_LUN(hcb_p np, int target, int lun) 2273 { 2274 printf ("%s:%d:%d:", sym_name(np), target, lun); 2275 } 2276 2277 static void PRINT_ADDR (ccb_p cp) 2278 { 2279 if (cp && cp->cam_ccb) 2280 xpt_print_path(cp->cam_ccb->ccb_h.path); 2281 } 2282 2283 /* 2284 * Take into account this ccb in the freeze count. 2285 */ 2286 static void sym_freeze_cam_ccb(union ccb *ccb) 2287 { 2288 if (!(ccb->ccb_h.flags & CAM_DEV_QFRZDIS)) { 2289 if (!(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 2290 ccb->ccb_h.status |= CAM_DEV_QFRZN; 2291 xpt_freeze_devq(ccb->ccb_h.path, 1); 2292 } 2293 } 2294 } 2295 2296 /* 2297 * Set the status field of a CAM CCB. 2298 */ 2299 static __inline void sym_set_cam_status(union ccb *ccb, cam_status status) 2300 { 2301 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2302 ccb->ccb_h.status |= status; 2303 } 2304 2305 /* 2306 * Get the status field of a CAM CCB. 2307 */ 2308 static __inline int sym_get_cam_status(union ccb *ccb) 2309 { 2310 return ccb->ccb_h.status & CAM_STATUS_MASK; 2311 } 2312 2313 /* 2314 * Enqueue a CAM CCB. 2315 */ 2316 static void sym_enqueue_cam_ccb(ccb_p cp) 2317 { 2318 hcb_p np; 2319 union ccb *ccb; 2320 2321 ccb = cp->cam_ccb; 2322 np = (hcb_p) cp->arg; 2323 2324 assert(!(ccb->ccb_h.status & CAM_SIM_QUEUED)); 2325 ccb->ccb_h.status = CAM_REQ_INPROG; 2326 2327 callout_reset_sbt(&cp->ch, SBT_1MS * ccb->ccb_h.timeout, 0, sym_callout, 2328 (caddr_t)ccb, 0); 2329 ccb->ccb_h.status |= CAM_SIM_QUEUED; 2330 ccb->ccb_h.sym_hcb_ptr = np; 2331 2332 sym_insque_tail(sym_qptr(&ccb->ccb_h.sim_links), &np->cam_ccbq); 2333 } 2334 2335 /* 2336 * Complete a pending CAM CCB. 2337 */ 2338 2339 static void sym_xpt_done(hcb_p np, union ccb *ccb, ccb_p cp) 2340 { 2341 2342 SYM_LOCK_ASSERT(MA_OWNED); 2343 2344 if (ccb->ccb_h.status & CAM_SIM_QUEUED) { 2345 callout_stop(&cp->ch); 2346 sym_remque(sym_qptr(&ccb->ccb_h.sim_links)); 2347 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2348 ccb->ccb_h.sym_hcb_ptr = NULL; 2349 } 2350 xpt_done(ccb); 2351 } 2352 2353 static void sym_xpt_done2(hcb_p np, union ccb *ccb, int cam_status) 2354 { 2355 2356 SYM_LOCK_ASSERT(MA_OWNED); 2357 2358 sym_set_cam_status(ccb, cam_status); 2359 xpt_done(ccb); 2360 } 2361 2362 /* 2363 * SYMBIOS chip clock divisor table. 2364 * 2365 * Divisors are multiplied by 10,000,000 in order to make 2366 * calculations more simple. 2367 */ 2368 #define _5M 5000000 2369 static const u32 div_10M[] = 2370 {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; 2371 2372 /* 2373 * SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64, 2374 * 128 transfers. All chips support at least 16 transfers 2375 * bursts. The 825A, 875 and 895 chips support bursts of up 2376 * to 128 transfers and the 895A and 896 support bursts of up 2377 * to 64 transfers. All other chips support up to 16 2378 * transfers bursts. 2379 * 2380 * For PCI 32 bit data transfers each transfer is a DWORD. 2381 * It is a QUADWORD (8 bytes) for PCI 64 bit data transfers. 2382 * 2383 * We use log base 2 (burst length) as internal code, with 2384 * value 0 meaning "burst disabled". 2385 */ 2386 2387 /* 2388 * Burst length from burst code. 2389 */ 2390 #define burst_length(bc) (!(bc))? 0 : 1 << (bc) 2391 2392 /* 2393 * Burst code from io register bits. 2394 */ 2395 #define burst_code(dmode, ctest4, ctest5) \ 2396 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1 2397 2398 /* 2399 * Set initial io register bits from burst code. 2400 */ 2401 static __inline void sym_init_burst(hcb_p np, u_char bc) 2402 { 2403 np->rv_ctest4 &= ~0x80; 2404 np->rv_dmode &= ~(0x3 << 6); 2405 np->rv_ctest5 &= ~0x4; 2406 2407 if (!bc) { 2408 np->rv_ctest4 |= 0x80; 2409 } 2410 else { 2411 --bc; 2412 np->rv_dmode |= ((bc & 0x3) << 6); 2413 np->rv_ctest5 |= (bc & 0x4); 2414 } 2415 } 2416 2417 /* 2418 * Print out the list of targets that have some flag disabled by user. 2419 */ 2420 static void sym_print_targets_flag(hcb_p np, int mask, char *msg) 2421 { 2422 int cnt; 2423 int i; 2424 2425 for (cnt = 0, i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 2426 if (i == np->myaddr) 2427 continue; 2428 if (np->target[i].usrflags & mask) { 2429 if (!cnt++) 2430 printf("%s: %s disabled for targets", 2431 sym_name(np), msg); 2432 printf(" %d", i); 2433 } 2434 } 2435 if (cnt) 2436 printf(".\n"); 2437 } 2438 2439 /* 2440 * Save initial settings of some IO registers. 2441 * Assumed to have been set by BIOS. 2442 * We cannot reset the chip prior to reading the 2443 * IO registers, since informations will be lost. 2444 * Since the SCRIPTS processor may be running, this 2445 * is not safe on paper, but it seems to work quite 2446 * well. :) 2447 */ 2448 static void sym_save_initial_setting (hcb_p np) 2449 { 2450 np->sv_scntl0 = INB(nc_scntl0) & 0x0a; 2451 np->sv_scntl3 = INB(nc_scntl3) & 0x07; 2452 np->sv_dmode = INB(nc_dmode) & 0xce; 2453 np->sv_dcntl = INB(nc_dcntl) & 0xa8; 2454 np->sv_ctest3 = INB(nc_ctest3) & 0x01; 2455 np->sv_ctest4 = INB(nc_ctest4) & 0x80; 2456 np->sv_gpcntl = INB(nc_gpcntl); 2457 np->sv_stest1 = INB(nc_stest1); 2458 np->sv_stest2 = INB(nc_stest2) & 0x20; 2459 np->sv_stest4 = INB(nc_stest4); 2460 if (np->features & FE_C10) { /* Always large DMA fifo + ultra3 */ 2461 np->sv_scntl4 = INB(nc_scntl4); 2462 np->sv_ctest5 = INB(nc_ctest5) & 0x04; 2463 } 2464 else 2465 np->sv_ctest5 = INB(nc_ctest5) & 0x24; 2466 } 2467 2468 /* 2469 * Prepare io register values used by sym_init() according 2470 * to selected and supported features. 2471 */ 2472 static int sym_prepare_setting(hcb_p np, struct sym_nvram *nvram) 2473 { 2474 u_char burst_max; 2475 u32 period; 2476 int i; 2477 2478 /* 2479 * Wide ? 2480 */ 2481 np->maxwide = (np->features & FE_WIDE)? 1 : 0; 2482 2483 /* 2484 * Get the frequency of the chip's clock. 2485 */ 2486 if (np->features & FE_QUAD) 2487 np->multiplier = 4; 2488 else if (np->features & FE_DBLR) 2489 np->multiplier = 2; 2490 else 2491 np->multiplier = 1; 2492 2493 np->clock_khz = (np->features & FE_CLK80)? 80000 : 40000; 2494 np->clock_khz *= np->multiplier; 2495 2496 if (np->clock_khz != 40000) 2497 sym_getclock(np, np->multiplier); 2498 2499 /* 2500 * Divisor to be used for async (timer pre-scaler). 2501 */ 2502 i = np->clock_divn - 1; 2503 while (--i >= 0) { 2504 if (10ul * SYM_CONF_MIN_ASYNC * np->clock_khz > div_10M[i]) { 2505 ++i; 2506 break; 2507 } 2508 } 2509 np->rv_scntl3 = i+1; 2510 2511 /* 2512 * The C1010 uses hardwired divisors for async. 2513 * So, we just throw away, the async. divisor.:-) 2514 */ 2515 if (np->features & FE_C10) 2516 np->rv_scntl3 = 0; 2517 2518 /* 2519 * Minimum synchronous period factor supported by the chip. 2520 * Btw, 'period' is in tenths of nanoseconds. 2521 */ 2522 period = howmany(4 * div_10M[0], np->clock_khz); 2523 if (period <= 250) np->minsync = 10; 2524 else if (period <= 303) np->minsync = 11; 2525 else if (period <= 500) np->minsync = 12; 2526 else np->minsync = howmany(period, 40); 2527 2528 /* 2529 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). 2530 */ 2531 if (np->minsync < 25 && 2532 !(np->features & (FE_ULTRA|FE_ULTRA2|FE_ULTRA3))) 2533 np->minsync = 25; 2534 else if (np->minsync < 12 && 2535 !(np->features & (FE_ULTRA2|FE_ULTRA3))) 2536 np->minsync = 12; 2537 2538 /* 2539 * Maximum synchronous period factor supported by the chip. 2540 */ 2541 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); 2542 np->maxsync = period > 2540 ? 254 : period / 10; 2543 2544 /* 2545 * If chip is a C1010, guess the sync limits in DT mode. 2546 */ 2547 if ((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) { 2548 if (np->clock_khz == 160000) { 2549 np->minsync_dt = 9; 2550 np->maxsync_dt = 50; 2551 np->maxoffs_dt = 62; 2552 } 2553 } 2554 2555 /* 2556 * 64 bit addressing (895A/896/1010) ? 2557 */ 2558 if (np->features & FE_DAC) 2559 #ifdef __LP64__ 2560 np->rv_ccntl1 |= (XTIMOD | EXTIBMV); 2561 #else 2562 np->rv_ccntl1 |= (DDAC); 2563 #endif 2564 2565 /* 2566 * Phase mismatch handled by SCRIPTS (895A/896/1010) ? 2567 */ 2568 if (np->features & FE_NOPM) 2569 np->rv_ccntl0 |= (ENPMJ); 2570 2571 /* 2572 * C1010 Errata. 2573 * In dual channel mode, contention occurs if internal cycles 2574 * are used. Disable internal cycles. 2575 */ 2576 if (np->device_id == PCI_ID_LSI53C1010 && 2577 np->revision_id < 0x2) 2578 np->rv_ccntl0 |= DILS; 2579 2580 /* 2581 * Select burst length (dwords) 2582 */ 2583 burst_max = SYM_SETUP_BURST_ORDER; 2584 if (burst_max == 255) 2585 burst_max = burst_code(np->sv_dmode, np->sv_ctest4, 2586 np->sv_ctest5); 2587 if (burst_max > 7) 2588 burst_max = 7; 2589 if (burst_max > np->maxburst) 2590 burst_max = np->maxburst; 2591 2592 /* 2593 * DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2. 2594 * This chip and the 860 Rev 1 may wrongly use PCI cache line 2595 * based transactions on LOAD/STORE instructions. So we have 2596 * to prevent these chips from using such PCI transactions in 2597 * this driver. The generic ncr driver that does not use 2598 * LOAD/STORE instructions does not need this work-around. 2599 */ 2600 if ((np->device_id == PCI_ID_SYM53C810 && 2601 np->revision_id >= 0x10 && np->revision_id <= 0x11) || 2602 (np->device_id == PCI_ID_SYM53C860 && 2603 np->revision_id <= 0x1)) 2604 np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP); 2605 2606 /* 2607 * Select all supported special features. 2608 * If we are using on-board RAM for scripts, prefetch (PFEN) 2609 * does not help, but burst op fetch (BOF) does. 2610 * Disabling PFEN makes sure BOF will be used. 2611 */ 2612 if (np->features & FE_ERL) 2613 np->rv_dmode |= ERL; /* Enable Read Line */ 2614 if (np->features & FE_BOF) 2615 np->rv_dmode |= BOF; /* Burst Opcode Fetch */ 2616 if (np->features & FE_ERMP) 2617 np->rv_dmode |= ERMP; /* Enable Read Multiple */ 2618 #if 1 2619 if ((np->features & FE_PFEN) && !np->ram_ba) 2620 #else 2621 if (np->features & FE_PFEN) 2622 #endif 2623 np->rv_dcntl |= PFEN; /* Prefetch Enable */ 2624 if (np->features & FE_CLSE) 2625 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ 2626 if (np->features & FE_WRIE) 2627 np->rv_ctest3 |= WRIE; /* Write and Invalidate */ 2628 if (np->features & FE_DFS) 2629 np->rv_ctest5 |= DFS; /* Dma Fifo Size */ 2630 2631 /* 2632 * Select some other 2633 */ 2634 if (SYM_SETUP_PCI_PARITY) 2635 np->rv_ctest4 |= MPEE; /* Master parity checking */ 2636 if (SYM_SETUP_SCSI_PARITY) 2637 np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */ 2638 2639 /* 2640 * Get parity checking, host ID and verbose mode from NVRAM 2641 */ 2642 np->myaddr = 255; 2643 sym_nvram_setup_host (np, nvram); 2644 2645 /* 2646 * Get SCSI addr of host adapter (set by bios?). 2647 */ 2648 if (np->myaddr == 255) { 2649 np->myaddr = INB(nc_scid) & 0x07; 2650 if (!np->myaddr) 2651 np->myaddr = SYM_SETUP_HOST_ID; 2652 } 2653 2654 /* 2655 * Prepare initial io register bits for burst length 2656 */ 2657 sym_init_burst(np, burst_max); 2658 2659 /* 2660 * Set SCSI BUS mode. 2661 * - LVD capable chips (895/895A/896/1010) report the 2662 * current BUS mode through the STEST4 IO register. 2663 * - For previous generation chips (825/825A/875), 2664 * user has to tell us how to check against HVD, 2665 * since a 100% safe algorithm is not possible. 2666 */ 2667 np->scsi_mode = SMODE_SE; 2668 if (np->features & (FE_ULTRA2|FE_ULTRA3)) 2669 np->scsi_mode = (np->sv_stest4 & SMODE); 2670 else if (np->features & FE_DIFF) { 2671 if (SYM_SETUP_SCSI_DIFF == 1) { 2672 if (np->sv_scntl3) { 2673 if (np->sv_stest2 & 0x20) 2674 np->scsi_mode = SMODE_HVD; 2675 } 2676 else if (nvram->type == SYM_SYMBIOS_NVRAM) { 2677 if (!(INB(nc_gpreg) & 0x08)) 2678 np->scsi_mode = SMODE_HVD; 2679 } 2680 } 2681 else if (SYM_SETUP_SCSI_DIFF == 2) 2682 np->scsi_mode = SMODE_HVD; 2683 } 2684 if (np->scsi_mode == SMODE_HVD) 2685 np->rv_stest2 |= 0x20; 2686 2687 /* 2688 * Set LED support from SCRIPTS. 2689 * Ignore this feature for boards known to use a 2690 * specific GPIO wiring and for the 895A, 896 2691 * and 1010 that drive the LED directly. 2692 */ 2693 if ((SYM_SETUP_SCSI_LED || 2694 (nvram->type == SYM_SYMBIOS_NVRAM || 2695 (nvram->type == SYM_TEKRAM_NVRAM && 2696 np->device_id == PCI_ID_SYM53C895))) && 2697 !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) 2698 np->features |= FE_LED0; 2699 2700 /* 2701 * Set irq mode. 2702 */ 2703 switch(SYM_SETUP_IRQ_MODE & 3) { 2704 case 2: 2705 np->rv_dcntl |= IRQM; 2706 break; 2707 case 1: 2708 np->rv_dcntl |= (np->sv_dcntl & IRQM); 2709 break; 2710 default: 2711 break; 2712 } 2713 2714 /* 2715 * Configure targets according to driver setup. 2716 * If NVRAM present get targets setup from NVRAM. 2717 */ 2718 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 2719 tcb_p tp = &np->target[i]; 2720 2721 tp->tinfo.user.scsi_version = tp->tinfo.current.scsi_version= 2; 2722 tp->tinfo.user.spi_version = tp->tinfo.current.spi_version = 2; 2723 tp->tinfo.user.period = np->minsync; 2724 if (np->features & FE_ULTRA3) 2725 tp->tinfo.user.period = np->minsync_dt; 2726 tp->tinfo.user.offset = np->maxoffs; 2727 tp->tinfo.user.width = np->maxwide ? BUS_16_BIT : BUS_8_BIT; 2728 tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); 2729 tp->usrtags = SYM_SETUP_MAX_TAG; 2730 2731 sym_nvram_setup_target (np, i, nvram); 2732 2733 /* 2734 * For now, guess PPR/DT support from the period 2735 * and BUS width. 2736 */ 2737 if (np->features & FE_ULTRA3) { 2738 if (tp->tinfo.user.period <= 9 && 2739 tp->tinfo.user.width == BUS_16_BIT) { 2740 tp->tinfo.user.options |= PPR_OPT_DT; 2741 tp->tinfo.user.offset = np->maxoffs_dt; 2742 tp->tinfo.user.spi_version = 3; 2743 } 2744 } 2745 2746 if (!tp->usrtags) 2747 tp->usrflags &= ~SYM_TAGS_ENABLED; 2748 } 2749 2750 /* 2751 * Let user know about the settings. 2752 */ 2753 i = nvram->type; 2754 printf("%s: %s NVRAM, ID %d, Fast-%d, %s, %s\n", sym_name(np), 2755 i == SYM_SYMBIOS_NVRAM ? "Symbios" : 2756 (i == SYM_TEKRAM_NVRAM ? "Tekram" : "No"), 2757 np->myaddr, 2758 (np->features & FE_ULTRA3) ? 80 : 2759 (np->features & FE_ULTRA2) ? 40 : 2760 (np->features & FE_ULTRA) ? 20 : 10, 2761 sym_scsi_bus_mode(np->scsi_mode), 2762 (np->rv_scntl0 & 0xa) ? "parity checking" : "NO parity"); 2763 /* 2764 * Tell him more on demand. 2765 */ 2766 if (sym_verbose) { 2767 printf("%s: %s IRQ line driver%s\n", 2768 sym_name(np), 2769 np->rv_dcntl & IRQM ? "totem pole" : "open drain", 2770 np->ram_ba ? ", using on-chip SRAM" : ""); 2771 printf("%s: using %s firmware.\n", sym_name(np), np->fw_name); 2772 if (np->features & FE_NOPM) 2773 printf("%s: handling phase mismatch from SCRIPTS.\n", 2774 sym_name(np)); 2775 } 2776 /* 2777 * And still more. 2778 */ 2779 if (sym_verbose > 1) { 2780 printf ("%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 2781 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 2782 sym_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl, 2783 np->sv_ctest3, np->sv_ctest4, np->sv_ctest5); 2784 2785 printf ("%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 2786 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 2787 sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl, 2788 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 2789 } 2790 /* 2791 * Let user be aware of targets that have some disable flags set. 2792 */ 2793 sym_print_targets_flag(np, SYM_SCAN_BOOT_DISABLED, "SCAN AT BOOT"); 2794 if (sym_verbose) 2795 sym_print_targets_flag(np, SYM_SCAN_LUNS_DISABLED, 2796 "SCAN FOR LUNS"); 2797 2798 return 0; 2799 } 2800 2801 /* 2802 * Prepare the next negotiation message if needed. 2803 * 2804 * Fill in the part of message buffer that contains the 2805 * negotiation and the nego_status field of the CCB. 2806 * Returns the size of the message in bytes. 2807 */ 2808 static int sym_prepare_nego(hcb_p np, ccb_p cp, int nego, u_char *msgptr) 2809 { 2810 tcb_p tp = &np->target[cp->target]; 2811 int msglen = 0; 2812 2813 /* 2814 * Early C1010 chips need a work-around for DT 2815 * data transfer to work. 2816 */ 2817 if (!(np->features & FE_U3EN)) 2818 tp->tinfo.goal.options = 0; 2819 /* 2820 * negotiate using PPR ? 2821 */ 2822 if (tp->tinfo.goal.options & PPR_OPT_MASK) 2823 nego = NS_PPR; 2824 /* 2825 * negotiate wide transfers ? 2826 */ 2827 else if (tp->tinfo.current.width != tp->tinfo.goal.width) 2828 nego = NS_WIDE; 2829 /* 2830 * negotiate synchronous transfers? 2831 */ 2832 else if (tp->tinfo.current.period != tp->tinfo.goal.period || 2833 tp->tinfo.current.offset != tp->tinfo.goal.offset) 2834 nego = NS_SYNC; 2835 2836 switch (nego) { 2837 case NS_SYNC: 2838 msgptr[msglen++] = M_EXTENDED; 2839 msgptr[msglen++] = 3; 2840 msgptr[msglen++] = M_X_SYNC_REQ; 2841 msgptr[msglen++] = tp->tinfo.goal.period; 2842 msgptr[msglen++] = tp->tinfo.goal.offset; 2843 break; 2844 case NS_WIDE: 2845 msgptr[msglen++] = M_EXTENDED; 2846 msgptr[msglen++] = 2; 2847 msgptr[msglen++] = M_X_WIDE_REQ; 2848 msgptr[msglen++] = tp->tinfo.goal.width; 2849 break; 2850 case NS_PPR: 2851 msgptr[msglen++] = M_EXTENDED; 2852 msgptr[msglen++] = 6; 2853 msgptr[msglen++] = M_X_PPR_REQ; 2854 msgptr[msglen++] = tp->tinfo.goal.period; 2855 msgptr[msglen++] = 0; 2856 msgptr[msglen++] = tp->tinfo.goal.offset; 2857 msgptr[msglen++] = tp->tinfo.goal.width; 2858 msgptr[msglen++] = tp->tinfo.goal.options & PPR_OPT_DT; 2859 break; 2860 } 2861 2862 cp->nego_status = nego; 2863 2864 if (nego) { 2865 tp->nego_cp = cp; /* Keep track a nego will be performed */ 2866 if (DEBUG_FLAGS & DEBUG_NEGO) { 2867 sym_print_msg(cp, nego == NS_SYNC ? "sync msgout" : 2868 nego == NS_WIDE ? "wide msgout" : 2869 "ppr msgout", msgptr); 2870 } 2871 } 2872 2873 return msglen; 2874 } 2875 2876 /* 2877 * Insert a job into the start queue. 2878 */ 2879 static void sym_put_start_queue(hcb_p np, ccb_p cp) 2880 { 2881 u_short qidx; 2882 2883 #ifdef SYM_CONF_IARB_SUPPORT 2884 /* 2885 * If the previously queued CCB is not yet done, 2886 * set the IARB hint. The SCRIPTS will go with IARB 2887 * for this job when starting the previous one. 2888 * We leave devices a chance to win arbitration by 2889 * not using more than 'iarb_max' consecutive 2890 * immediate arbitrations. 2891 */ 2892 if (np->last_cp && np->iarb_count < np->iarb_max) { 2893 np->last_cp->host_flags |= HF_HINT_IARB; 2894 ++np->iarb_count; 2895 } 2896 else 2897 np->iarb_count = 0; 2898 np->last_cp = cp; 2899 #endif 2900 2901 /* 2902 * Insert first the idle task and then our job. 2903 * The MB should ensure proper ordering. 2904 */ 2905 qidx = np->squeueput + 2; 2906 if (qidx >= MAX_QUEUE*2) qidx = 0; 2907 2908 np->squeue [qidx] = cpu_to_scr(np->idletask_ba); 2909 MEMORY_BARRIER(); 2910 np->squeue [np->squeueput] = cpu_to_scr(cp->ccb_ba); 2911 2912 np->squeueput = qidx; 2913 2914 if (DEBUG_FLAGS & DEBUG_QUEUE) 2915 printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput); 2916 2917 /* 2918 * Script processor may be waiting for reselect. 2919 * Wake it up. 2920 */ 2921 MEMORY_BARRIER(); 2922 OUTB (nc_istat, SIGP|np->istat_sem); 2923 } 2924 2925 /* 2926 * Soft reset the chip. 2927 * 2928 * Raising SRST when the chip is running may cause 2929 * problems on dual function chips (see below). 2930 * On the other hand, LVD devices need some delay 2931 * to settle and report actual BUS mode in STEST4. 2932 */ 2933 static void sym_chip_reset (hcb_p np) 2934 { 2935 OUTB (nc_istat, SRST); 2936 UDELAY (10); 2937 OUTB (nc_istat, 0); 2938 UDELAY(2000); /* For BUS MODE to settle */ 2939 } 2940 2941 /* 2942 * Soft reset the chip. 2943 * 2944 * Some 896 and 876 chip revisions may hang-up if we set 2945 * the SRST (soft reset) bit at the wrong time when SCRIPTS 2946 * are running. 2947 * So, we need to abort the current operation prior to 2948 * soft resetting the chip. 2949 */ 2950 static void sym_soft_reset (hcb_p np) 2951 { 2952 u_char istat; 2953 int i; 2954 2955 OUTB (nc_istat, CABRT); 2956 for (i = 1000000 ; i ; --i) { 2957 istat = INB (nc_istat); 2958 if (istat & SIP) { 2959 INW (nc_sist); 2960 continue; 2961 } 2962 if (istat & DIP) { 2963 OUTB (nc_istat, 0); 2964 INB (nc_dstat); 2965 break; 2966 } 2967 } 2968 if (!i) 2969 printf("%s: unable to abort current chip operation.\n", 2970 sym_name(np)); 2971 sym_chip_reset (np); 2972 } 2973 2974 /* 2975 * Start reset process. 2976 * 2977 * The interrupt handler will reinitialize the chip. 2978 */ 2979 static void sym_start_reset(hcb_p np) 2980 { 2981 (void) sym_reset_scsi_bus(np, 1); 2982 } 2983 2984 static int sym_reset_scsi_bus(hcb_p np, int enab_int) 2985 { 2986 u32 term; 2987 int retv = 0; 2988 2989 sym_soft_reset(np); /* Soft reset the chip */ 2990 if (enab_int) 2991 OUTW (nc_sien, RST); 2992 /* 2993 * Enable Tolerant, reset IRQD if present and 2994 * properly set IRQ mode, prior to resetting the bus. 2995 */ 2996 OUTB (nc_stest3, TE); 2997 OUTB (nc_dcntl, (np->rv_dcntl & IRQM)); 2998 OUTB (nc_scntl1, CRST); 2999 UDELAY (200); 3000 3001 if (!SYM_SETUP_SCSI_BUS_CHECK) 3002 goto out; 3003 /* 3004 * Check for no terminators or SCSI bus shorts to ground. 3005 * Read SCSI data bus, data parity bits and control signals. 3006 * We are expecting RESET to be TRUE and other signals to be 3007 * FALSE. 3008 */ 3009 term = INB(nc_sstat0); 3010 term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */ 3011 term |= ((INB(nc_sstat2) & 0x01) << 26) | /* sdp1 */ 3012 ((INW(nc_sbdl) & 0xff) << 9) | /* d7-0 */ 3013 ((INW(nc_sbdl) & 0xff00) << 10) | /* d15-8 */ 3014 INB(nc_sbcl); /* req ack bsy sel atn msg cd io */ 3015 3016 if (!(np->features & FE_WIDE)) 3017 term &= 0x3ffff; 3018 3019 if (term != (2<<7)) { 3020 printf("%s: suspicious SCSI data while resetting the BUS.\n", 3021 sym_name(np)); 3022 printf("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = " 3023 "0x%lx, expecting 0x%lx\n", 3024 sym_name(np), 3025 (np->features & FE_WIDE) ? "dp1,d15-8," : "", 3026 (u_long)term, (u_long)(2<<7)); 3027 if (SYM_SETUP_SCSI_BUS_CHECK == 1) 3028 retv = 1; 3029 } 3030 out: 3031 OUTB (nc_scntl1, 0); 3032 /* MDELAY(100); */ 3033 return retv; 3034 } 3035 3036 /* 3037 * The chip may have completed jobs. Look at the DONE QUEUE. 3038 * 3039 * On architectures that may reorder LOAD/STORE operations, 3040 * a memory barrier may be needed after the reading of the 3041 * so-called `flag' and prior to dealing with the data. 3042 */ 3043 static int sym_wakeup_done (hcb_p np) 3044 { 3045 ccb_p cp; 3046 int i, n; 3047 u32 dsa; 3048 3049 SYM_LOCK_ASSERT(MA_OWNED); 3050 3051 n = 0; 3052 i = np->dqueueget; 3053 while (1) { 3054 dsa = scr_to_cpu(np->dqueue[i]); 3055 if (!dsa) 3056 break; 3057 np->dqueue[i] = 0; 3058 if ((i = i+2) >= MAX_QUEUE*2) 3059 i = 0; 3060 3061 cp = sym_ccb_from_dsa(np, dsa); 3062 if (cp) { 3063 MEMORY_BARRIER(); 3064 sym_complete_ok (np, cp); 3065 ++n; 3066 } 3067 else 3068 printf ("%s: bad DSA (%x) in done queue.\n", 3069 sym_name(np), (u_int) dsa); 3070 } 3071 np->dqueueget = i; 3072 3073 return n; 3074 } 3075 3076 /* 3077 * Complete all active CCBs with error. 3078 * Used on CHIP/SCSI RESET. 3079 */ 3080 static void sym_flush_busy_queue (hcb_p np, int cam_status) 3081 { 3082 /* 3083 * Move all active CCBs to the COMP queue 3084 * and flush this queue. 3085 */ 3086 sym_que_splice(&np->busy_ccbq, &np->comp_ccbq); 3087 sym_que_init(&np->busy_ccbq); 3088 sym_flush_comp_queue(np, cam_status); 3089 } 3090 3091 /* 3092 * Start chip. 3093 * 3094 * 'reason' means: 3095 * 0: initialisation. 3096 * 1: SCSI BUS RESET delivered or received. 3097 * 2: SCSI BUS MODE changed. 3098 */ 3099 static void sym_init (hcb_p np, int reason) 3100 { 3101 int i; 3102 u32 phys; 3103 3104 SYM_LOCK_ASSERT(MA_OWNED); 3105 3106 /* 3107 * Reset chip if asked, otherwise just clear fifos. 3108 */ 3109 if (reason == 1) 3110 sym_soft_reset(np); 3111 else { 3112 OUTB (nc_stest3, TE|CSF); 3113 OUTONB (nc_ctest3, CLF); 3114 } 3115 3116 /* 3117 * Clear Start Queue 3118 */ 3119 phys = np->squeue_ba; 3120 for (i = 0; i < MAX_QUEUE*2; i += 2) { 3121 np->squeue[i] = cpu_to_scr(np->idletask_ba); 3122 np->squeue[i+1] = cpu_to_scr(phys + (i+2)*4); 3123 } 3124 np->squeue[MAX_QUEUE*2-1] = cpu_to_scr(phys); 3125 3126 /* 3127 * Start at first entry. 3128 */ 3129 np->squeueput = 0; 3130 3131 /* 3132 * Clear Done Queue 3133 */ 3134 phys = np->dqueue_ba; 3135 for (i = 0; i < MAX_QUEUE*2; i += 2) { 3136 np->dqueue[i] = 0; 3137 np->dqueue[i+1] = cpu_to_scr(phys + (i+2)*4); 3138 } 3139 np->dqueue[MAX_QUEUE*2-1] = cpu_to_scr(phys); 3140 3141 /* 3142 * Start at first entry. 3143 */ 3144 np->dqueueget = 0; 3145 3146 /* 3147 * Install patches in scripts. 3148 * This also let point to first position the start 3149 * and done queue pointers used from SCRIPTS. 3150 */ 3151 np->fw_patch(np); 3152 3153 /* 3154 * Wakeup all pending jobs. 3155 */ 3156 sym_flush_busy_queue(np, CAM_SCSI_BUS_RESET); 3157 3158 /* 3159 * Init chip. 3160 */ 3161 OUTB (nc_istat, 0x00 ); /* Remove Reset, abort */ 3162 UDELAY (2000); /* The 895 needs time for the bus mode to settle */ 3163 3164 OUTB (nc_scntl0, np->rv_scntl0 | 0xc0); 3165 /* full arb., ena parity, par->ATN */ 3166 OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */ 3167 3168 sym_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ 3169 3170 OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */ 3171 OUTW (nc_respid, 1ul<<np->myaddr); /* Id to respond to */ 3172 OUTB (nc_istat , SIGP ); /* Signal Process */ 3173 OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */ 3174 OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */ 3175 3176 OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */ 3177 OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */ 3178 OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */ 3179 3180 /* Extended Sreq/Sack filtering not supported on the C10 */ 3181 if (np->features & FE_C10) 3182 OUTB (nc_stest2, np->rv_stest2); 3183 else 3184 OUTB (nc_stest2, EXT|np->rv_stest2); 3185 3186 OUTB (nc_stest3, TE); /* TolerANT enable */ 3187 OUTB (nc_stime0, 0x0c); /* HTH disabled STO 0.25 sec */ 3188 3189 /* 3190 * For now, disable AIP generation on C1010-66. 3191 */ 3192 if (np->device_id == PCI_ID_LSI53C1010_2) 3193 OUTB (nc_aipcntl1, DISAIP); 3194 3195 /* 3196 * C10101 Errata. 3197 * Errant SGE's when in narrow. Write bits 4 & 5 of 3198 * STEST1 register to disable SGE. We probably should do 3199 * that from SCRIPTS for each selection/reselection, but 3200 * I just don't want. :) 3201 */ 3202 if (np->device_id == PCI_ID_LSI53C1010 && 3203 /* np->revision_id < 0xff */ 1) 3204 OUTB (nc_stest1, INB(nc_stest1) | 0x30); 3205 3206 /* 3207 * DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2. 3208 * Disable overlapped arbitration for some dual function devices, 3209 * regardless revision id (kind of post-chip-design feature. ;-)) 3210 */ 3211 if (np->device_id == PCI_ID_SYM53C875) 3212 OUTB (nc_ctest0, (1<<5)); 3213 else if (np->device_id == PCI_ID_SYM53C896) 3214 np->rv_ccntl0 |= DPR; 3215 3216 /* 3217 * Write CCNTL0/CCNTL1 for chips capable of 64 bit addressing 3218 * and/or hardware phase mismatch, since only such chips 3219 * seem to support those IO registers. 3220 */ 3221 if (np->features & (FE_DAC|FE_NOPM)) { 3222 OUTB (nc_ccntl0, np->rv_ccntl0); 3223 OUTB (nc_ccntl1, np->rv_ccntl1); 3224 } 3225 3226 /* 3227 * If phase mismatch handled by scripts (895A/896/1010), 3228 * set PM jump addresses. 3229 */ 3230 if (np->features & FE_NOPM) { 3231 OUTL (nc_pmjad1, SCRIPTB_BA (np, pm_handle)); 3232 OUTL (nc_pmjad2, SCRIPTB_BA (np, pm_handle)); 3233 } 3234 3235 /* 3236 * Enable GPIO0 pin for writing if LED support from SCRIPTS. 3237 * Also set GPIO5 and clear GPIO6 if hardware LED control. 3238 */ 3239 if (np->features & FE_LED0) 3240 OUTB(nc_gpcntl, INB(nc_gpcntl) & ~0x01); 3241 else if (np->features & FE_LEDC) 3242 OUTB(nc_gpcntl, (INB(nc_gpcntl) & ~0x41) | 0x20); 3243 3244 /* 3245 * enable ints 3246 */ 3247 OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR); 3248 OUTB (nc_dien , MDPE|BF|SSI|SIR|IID); 3249 3250 /* 3251 * For 895/6 enable SBMC interrupt and save current SCSI bus mode. 3252 * Try to eat the spurious SBMC interrupt that may occur when 3253 * we reset the chip but not the SCSI BUS (at initialization). 3254 */ 3255 if (np->features & (FE_ULTRA2|FE_ULTRA3)) { 3256 OUTONW (nc_sien, SBMC); 3257 if (reason == 0) { 3258 MDELAY(100); 3259 INW (nc_sist); 3260 } 3261 np->scsi_mode = INB (nc_stest4) & SMODE; 3262 } 3263 3264 /* 3265 * Fill in target structure. 3266 * Reinitialize usrsync. 3267 * Reinitialize usrwide. 3268 * Prepare sync negotiation according to actual SCSI bus mode. 3269 */ 3270 for (i=0;i<SYM_CONF_MAX_TARGET;i++) { 3271 tcb_p tp = &np->target[i]; 3272 3273 tp->to_reset = 0; 3274 tp->head.sval = 0; 3275 tp->head.wval = np->rv_scntl3; 3276 tp->head.uval = 0; 3277 3278 tp->tinfo.current.period = 0; 3279 tp->tinfo.current.offset = 0; 3280 tp->tinfo.current.width = BUS_8_BIT; 3281 tp->tinfo.current.options = 0; 3282 } 3283 3284 /* 3285 * Download SCSI SCRIPTS to on-chip RAM if present, 3286 * and start script processor. 3287 */ 3288 if (np->ram_ba) { 3289 if (sym_verbose > 1) 3290 printf ("%s: Downloading SCSI SCRIPTS.\n", 3291 sym_name(np)); 3292 if (np->ram_ws == 8192) { 3293 OUTRAM_OFF(4096, np->scriptb0, np->scriptb_sz); 3294 OUTL (nc_mmws, np->scr_ram_seg); 3295 OUTL (nc_mmrs, np->scr_ram_seg); 3296 OUTL (nc_sfs, np->scr_ram_seg); 3297 phys = SCRIPTB_BA (np, start64); 3298 } 3299 else 3300 phys = SCRIPTA_BA (np, init); 3301 OUTRAM_OFF(0, np->scripta0, np->scripta_sz); 3302 } 3303 else 3304 phys = SCRIPTA_BA (np, init); 3305 3306 np->istat_sem = 0; 3307 3308 OUTL (nc_dsa, np->hcb_ba); 3309 OUTL_DSP (phys); 3310 3311 /* 3312 * Notify the XPT about the RESET condition. 3313 */ 3314 if (reason != 0) 3315 xpt_async(AC_BUS_RESET, np->path, NULL); 3316 } 3317 3318 /* 3319 * Get clock factor and sync divisor for a given 3320 * synchronous factor period. 3321 */ 3322 static int 3323 sym_getsync(hcb_p np, u_char dt, u_char sfac, u_char *divp, u_char *fakp) 3324 { 3325 u32 clk = np->clock_khz; /* SCSI clock frequency in kHz */ 3326 int div = np->clock_divn; /* Number of divisors supported */ 3327 u32 fak; /* Sync factor in sxfer */ 3328 u32 per; /* Period in tenths of ns */ 3329 u32 kpc; /* (per * clk) */ 3330 int ret; 3331 3332 /* 3333 * Compute the synchronous period in tenths of nano-seconds 3334 */ 3335 if (dt && sfac <= 9) per = 125; 3336 else if (sfac <= 10) per = 250; 3337 else if (sfac == 11) per = 303; 3338 else if (sfac == 12) per = 500; 3339 else per = 40 * sfac; 3340 ret = per; 3341 3342 kpc = per * clk; 3343 if (dt) 3344 kpc <<= 1; 3345 3346 /* 3347 * For earliest C10 revision 0, we cannot use extra 3348 * clocks for the setting of the SCSI clocking. 3349 * Note that this limits the lowest sync data transfer 3350 * to 5 Mega-transfers per second and may result in 3351 * using higher clock divisors. 3352 */ 3353 #if 1 3354 if ((np->features & (FE_C10|FE_U3EN)) == FE_C10) { 3355 /* 3356 * Look for the lowest clock divisor that allows an 3357 * output speed not faster than the period. 3358 */ 3359 while (div > 0) { 3360 --div; 3361 if (kpc > (div_10M[div] << 2)) { 3362 ++div; 3363 break; 3364 } 3365 } 3366 fak = 0; /* No extra clocks */ 3367 if (div == np->clock_divn) { /* Are we too fast ? */ 3368 ret = -1; 3369 } 3370 *divp = div; 3371 *fakp = fak; 3372 return ret; 3373 } 3374 #endif 3375 3376 /* 3377 * Look for the greatest clock divisor that allows an 3378 * input speed faster than the period. 3379 */ 3380 while (div-- > 0) 3381 if (kpc >= (div_10M[div] << 2)) break; 3382 3383 /* 3384 * Calculate the lowest clock factor that allows an output 3385 * speed not faster than the period, and the max output speed. 3386 * If fak >= 1 we will set both XCLKH_ST and XCLKH_DT. 3387 * If fak >= 2 we will also set XCLKS_ST and XCLKS_DT. 3388 */ 3389 if (dt) { 3390 fak = (kpc - 1) / (div_10M[div] << 1) + 1 - 2; 3391 /* ret = ((2+fak)*div_10M[div])/np->clock_khz; */ 3392 } 3393 else { 3394 fak = (kpc - 1) / div_10M[div] + 1 - 4; 3395 /* ret = ((4+fak)*div_10M[div])/np->clock_khz; */ 3396 } 3397 3398 /* 3399 * Check against our hardware limits, or bugs :). 3400 */ 3401 if (fak > 2) {fak = 2; ret = -1;} 3402 3403 /* 3404 * Compute and return sync parameters. 3405 */ 3406 *divp = div; 3407 *fakp = fak; 3408 3409 return ret; 3410 } 3411 3412 /* 3413 * Tell the SCSI layer about the new transfer parameters. 3414 */ 3415 static void 3416 sym_xpt_async_transfer_neg(hcb_p np, int target, u_int spi_valid) 3417 { 3418 struct ccb_trans_settings cts; 3419 struct cam_path *path; 3420 int sts; 3421 tcb_p tp = &np->target[target]; 3422 3423 sts = xpt_create_path(&path, NULL, cam_sim_path(np->sim), target, 3424 CAM_LUN_WILDCARD); 3425 if (sts != CAM_REQ_CMP) 3426 return; 3427 3428 bzero(&cts, sizeof(cts)); 3429 3430 #define cts__scsi (cts.proto_specific.scsi) 3431 #define cts__spi (cts.xport_specific.spi) 3432 3433 cts.type = CTS_TYPE_CURRENT_SETTINGS; 3434 cts.protocol = PROTO_SCSI; 3435 cts.transport = XPORT_SPI; 3436 cts.protocol_version = tp->tinfo.current.scsi_version; 3437 cts.transport_version = tp->tinfo.current.spi_version; 3438 3439 cts__spi.valid = spi_valid; 3440 if (spi_valid & CTS_SPI_VALID_SYNC_RATE) 3441 cts__spi.sync_period = tp->tinfo.current.period; 3442 if (spi_valid & CTS_SPI_VALID_SYNC_OFFSET) 3443 cts__spi.sync_offset = tp->tinfo.current.offset; 3444 if (spi_valid & CTS_SPI_VALID_BUS_WIDTH) 3445 cts__spi.bus_width = tp->tinfo.current.width; 3446 if (spi_valid & CTS_SPI_VALID_PPR_OPTIONS) 3447 cts__spi.ppr_options = tp->tinfo.current.options; 3448 #undef cts__spi 3449 #undef cts__scsi 3450 xpt_setup_ccb(&cts.ccb_h, path, /*priority*/1); 3451 xpt_async(AC_TRANSFER_NEG, path, &cts); 3452 xpt_free_path(path); 3453 } 3454 3455 #define SYM_SPI_VALID_WDTR \ 3456 CTS_SPI_VALID_BUS_WIDTH | \ 3457 CTS_SPI_VALID_SYNC_RATE | \ 3458 CTS_SPI_VALID_SYNC_OFFSET 3459 #define SYM_SPI_VALID_SDTR \ 3460 CTS_SPI_VALID_SYNC_RATE | \ 3461 CTS_SPI_VALID_SYNC_OFFSET 3462 #define SYM_SPI_VALID_PPR \ 3463 CTS_SPI_VALID_PPR_OPTIONS | \ 3464 CTS_SPI_VALID_BUS_WIDTH | \ 3465 CTS_SPI_VALID_SYNC_RATE | \ 3466 CTS_SPI_VALID_SYNC_OFFSET 3467 3468 /* 3469 * We received a WDTR. 3470 * Let everything be aware of the changes. 3471 */ 3472 static void sym_setwide(hcb_p np, ccb_p cp, u_char wide) 3473 { 3474 tcb_p tp = &np->target[cp->target]; 3475 3476 sym_settrans(np, cp, 0, 0, 0, wide, 0, 0); 3477 3478 /* 3479 * Tell the SCSI layer about the new transfer parameters. 3480 */ 3481 tp->tinfo.goal.width = tp->tinfo.current.width = wide; 3482 tp->tinfo.current.offset = 0; 3483 tp->tinfo.current.period = 0; 3484 tp->tinfo.current.options = 0; 3485 3486 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_WDTR); 3487 } 3488 3489 /* 3490 * We received a SDTR. 3491 * Let everything be aware of the changes. 3492 */ 3493 static void 3494 sym_setsync(hcb_p np, ccb_p cp, u_char ofs, u_char per, u_char div, u_char fak) 3495 { 3496 tcb_p tp = &np->target[cp->target]; 3497 u_char wide = (cp->phys.select.sel_scntl3 & EWS) ? 1 : 0; 3498 3499 sym_settrans(np, cp, 0, ofs, per, wide, div, fak); 3500 3501 /* 3502 * Tell the SCSI layer about the new transfer parameters. 3503 */ 3504 tp->tinfo.goal.period = tp->tinfo.current.period = per; 3505 tp->tinfo.goal.offset = tp->tinfo.current.offset = ofs; 3506 tp->tinfo.goal.options = tp->tinfo.current.options = 0; 3507 3508 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_SDTR); 3509 } 3510 3511 /* 3512 * We received a PPR. 3513 * Let everything be aware of the changes. 3514 */ 3515 static void sym_setpprot(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 3516 u_char per, u_char wide, u_char div, u_char fak) 3517 { 3518 tcb_p tp = &np->target[cp->target]; 3519 3520 sym_settrans(np, cp, dt, ofs, per, wide, div, fak); 3521 3522 /* 3523 * Tell the SCSI layer about the new transfer parameters. 3524 */ 3525 tp->tinfo.goal.width = tp->tinfo.current.width = wide; 3526 tp->tinfo.goal.period = tp->tinfo.current.period = per; 3527 tp->tinfo.goal.offset = tp->tinfo.current.offset = ofs; 3528 tp->tinfo.goal.options = tp->tinfo.current.options = dt; 3529 3530 sym_xpt_async_transfer_neg(np, cp->target, SYM_SPI_VALID_PPR); 3531 } 3532 3533 /* 3534 * Switch trans mode for current job and it's target. 3535 */ 3536 static void sym_settrans(hcb_p np, ccb_p cp, u_char dt, u_char ofs, 3537 u_char per, u_char wide, u_char div, u_char fak) 3538 { 3539 SYM_QUEHEAD *qp; 3540 union ccb *ccb; 3541 tcb_p tp; 3542 u_char target = INB (nc_sdid) & 0x0f; 3543 u_char sval, wval, uval; 3544 3545 assert (cp); 3546 if (!cp) return; 3547 ccb = cp->cam_ccb; 3548 assert (ccb); 3549 if (!ccb) return; 3550 assert (target == (cp->target & 0xf)); 3551 tp = &np->target[target]; 3552 3553 sval = tp->head.sval; 3554 wval = tp->head.wval; 3555 uval = tp->head.uval; 3556 3557 #if 0 3558 printf("XXXX sval=%x wval=%x uval=%x (%x)\n", 3559 sval, wval, uval, np->rv_scntl3); 3560 #endif 3561 /* 3562 * Set the offset. 3563 */ 3564 if (!(np->features & FE_C10)) 3565 sval = (sval & ~0x1f) | ofs; 3566 else 3567 sval = (sval & ~0x3f) | ofs; 3568 3569 /* 3570 * Set the sync divisor and extra clock factor. 3571 */ 3572 if (ofs != 0) { 3573 wval = (wval & ~0x70) | ((div+1) << 4); 3574 if (!(np->features & FE_C10)) 3575 sval = (sval & ~0xe0) | (fak << 5); 3576 else { 3577 uval = uval & ~(XCLKH_ST|XCLKH_DT|XCLKS_ST|XCLKS_DT); 3578 if (fak >= 1) uval |= (XCLKH_ST|XCLKH_DT); 3579 if (fak >= 2) uval |= (XCLKS_ST|XCLKS_DT); 3580 } 3581 } 3582 3583 /* 3584 * Set the bus width. 3585 */ 3586 wval = wval & ~EWS; 3587 if (wide != 0) 3588 wval |= EWS; 3589 3590 /* 3591 * Set misc. ultra enable bits. 3592 */ 3593 if (np->features & FE_C10) { 3594 uval = uval & ~(U3EN|AIPCKEN); 3595 if (dt) { 3596 assert(np->features & FE_U3EN); 3597 uval |= U3EN; 3598 } 3599 } 3600 else { 3601 wval = wval & ~ULTRA; 3602 if (per <= 12) wval |= ULTRA; 3603 } 3604 3605 /* 3606 * Stop there if sync parameters are unchanged. 3607 */ 3608 if (tp->head.sval == sval && 3609 tp->head.wval == wval && 3610 tp->head.uval == uval) 3611 return; 3612 tp->head.sval = sval; 3613 tp->head.wval = wval; 3614 tp->head.uval = uval; 3615 3616 /* 3617 * Disable extended Sreq/Sack filtering if per < 50. 3618 * Not supported on the C1010. 3619 */ 3620 if (per < 50 && !(np->features & FE_C10)) 3621 OUTOFFB (nc_stest2, EXT); 3622 3623 /* 3624 * set actual value and sync_status 3625 */ 3626 OUTB (nc_sxfer, tp->head.sval); 3627 OUTB (nc_scntl3, tp->head.wval); 3628 3629 if (np->features & FE_C10) { 3630 OUTB (nc_scntl4, tp->head.uval); 3631 } 3632 3633 /* 3634 * patch ALL busy ccbs of this target. 3635 */ 3636 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 3637 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 3638 if (cp->target != target) 3639 continue; 3640 cp->phys.select.sel_scntl3 = tp->head.wval; 3641 cp->phys.select.sel_sxfer = tp->head.sval; 3642 if (np->features & FE_C10) { 3643 cp->phys.select.sel_scntl4 = tp->head.uval; 3644 } 3645 } 3646 } 3647 3648 /* 3649 * log message for real hard errors 3650 * 3651 * sym0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc). 3652 * reg: r0 r1 r2 r3 r4 r5 r6 ..... rf. 3653 * 3654 * exception register: 3655 * ds: dstat 3656 * si: sist 3657 * 3658 * SCSI bus lines: 3659 * so: control lines as driven by chip. 3660 * si: control lines as seen by chip. 3661 * sd: scsi data lines as seen by chip. 3662 * 3663 * wide/fastmode: 3664 * sxfer: (see the manual) 3665 * scntl3: (see the manual) 3666 * 3667 * current script command: 3668 * dsp: script address (relative to start of script). 3669 * dbc: first word of script command. 3670 * 3671 * First 24 register of the chip: 3672 * r0..rf 3673 */ 3674 static void sym_log_hard_error(hcb_p np, u_short sist, u_char dstat) 3675 { 3676 u32 dsp; 3677 int script_ofs; 3678 int script_size; 3679 char *script_name; 3680 u_char *script_base; 3681 int i; 3682 3683 dsp = INL (nc_dsp); 3684 3685 if (dsp > np->scripta_ba && 3686 dsp <= np->scripta_ba + np->scripta_sz) { 3687 script_ofs = dsp - np->scripta_ba; 3688 script_size = np->scripta_sz; 3689 script_base = (u_char *) np->scripta0; 3690 script_name = "scripta"; 3691 } 3692 else if (np->scriptb_ba < dsp && 3693 dsp <= np->scriptb_ba + np->scriptb_sz) { 3694 script_ofs = dsp - np->scriptb_ba; 3695 script_size = np->scriptb_sz; 3696 script_base = (u_char *) np->scriptb0; 3697 script_name = "scriptb"; 3698 } else { 3699 script_ofs = dsp; 3700 script_size = 0; 3701 script_base = NULL; 3702 script_name = "mem"; 3703 } 3704 3705 printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", 3706 sym_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, 3707 (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), 3708 (unsigned)INB (nc_sbdl), (unsigned)INB (nc_sxfer), 3709 (unsigned)INB (nc_scntl3), script_name, script_ofs, 3710 (unsigned)INL (nc_dbc)); 3711 3712 if (((script_ofs & 3) == 0) && 3713 (unsigned)script_ofs < script_size) { 3714 printf ("%s: script cmd = %08x\n", sym_name(np), 3715 scr_to_cpu((int) *(u32 *)(script_base + script_ofs))); 3716 } 3717 3718 printf ("%s: regdump:", sym_name(np)); 3719 for (i=0; i<24;i++) 3720 printf (" %02x", (unsigned)INB_OFF(i)); 3721 printf (".\n"); 3722 3723 /* 3724 * PCI BUS error, read the PCI ststus register. 3725 */ 3726 if (dstat & (MDPE|BF)) { 3727 u_short pci_sts; 3728 pci_sts = pci_read_config(np->device, PCIR_STATUS, 2); 3729 if (pci_sts & 0xf900) { 3730 pci_write_config(np->device, PCIR_STATUS, pci_sts, 2); 3731 printf("%s: PCI STATUS = 0x%04x\n", 3732 sym_name(np), pci_sts & 0xf900); 3733 } 3734 } 3735 } 3736 3737 /* 3738 * chip interrupt handler 3739 * 3740 * In normal situations, interrupt conditions occur one at 3741 * a time. But when something bad happens on the SCSI BUS, 3742 * the chip may raise several interrupt flags before 3743 * stopping and interrupting the CPU. The additionnal 3744 * interrupt flags are stacked in some extra registers 3745 * after the SIP and/or DIP flag has been raised in the 3746 * ISTAT. After the CPU has read the interrupt condition 3747 * flag from SIST or DSTAT, the chip unstacks the other 3748 * interrupt flags and sets the corresponding bits in 3749 * SIST or DSTAT. Since the chip starts stacking once the 3750 * SIP or DIP flag is set, there is a small window of time 3751 * where the stacking does not occur. 3752 * 3753 * Typically, multiple interrupt conditions may happen in 3754 * the following situations: 3755 * 3756 * - SCSI parity error + Phase mismatch (PAR|MA) 3757 * When a parity error is detected in input phase 3758 * and the device switches to msg-in phase inside a 3759 * block MOV. 3760 * - SCSI parity error + Unexpected disconnect (PAR|UDC) 3761 * When a stupid device does not want to handle the 3762 * recovery of an SCSI parity error. 3763 * - Some combinations of STO, PAR, UDC, ... 3764 * When using non compliant SCSI stuff, when user is 3765 * doing non compliant hot tampering on the BUS, when 3766 * something really bad happens to a device, etc ... 3767 * 3768 * The heuristic suggested by SYMBIOS to handle 3769 * multiple interrupts is to try unstacking all 3770 * interrupts conditions and to handle them on some 3771 * priority based on error severity. 3772 * This will work when the unstacking has been 3773 * successful, but we cannot be 100 % sure of that, 3774 * since the CPU may have been faster to unstack than 3775 * the chip is able to stack. Hmmm ... But it seems that 3776 * such a situation is very unlikely to happen. 3777 * 3778 * If this happen, for example STO caught by the CPU 3779 * then UDC happenning before the CPU have restarted 3780 * the SCRIPTS, the driver may wrongly complete the 3781 * same command on UDC, since the SCRIPTS didn't restart 3782 * and the DSA still points to the same command. 3783 * We avoid this situation by setting the DSA to an 3784 * invalid value when the CCB is completed and before 3785 * restarting the SCRIPTS. 3786 * 3787 * Another issue is that we need some section of our 3788 * recovery procedures to be somehow uninterruptible but 3789 * the SCRIPTS processor does not provides such a 3790 * feature. For this reason, we handle recovery preferently 3791 * from the C code and check against some SCRIPTS critical 3792 * sections from the C code. 3793 * 3794 * Hopefully, the interrupt handling of the driver is now 3795 * able to resist to weird BUS error conditions, but donnot 3796 * ask me for any guarantee that it will never fail. :-) 3797 * Use at your own decision and risk. 3798 */ 3799 static void sym_intr1 (hcb_p np) 3800 { 3801 u_char istat, istatc; 3802 u_char dstat; 3803 u_short sist; 3804 3805 SYM_LOCK_ASSERT(MA_OWNED); 3806 3807 /* 3808 * interrupt on the fly ? 3809 * 3810 * A `dummy read' is needed to ensure that the 3811 * clear of the INTF flag reaches the device 3812 * before the scanning of the DONE queue. 3813 */ 3814 istat = INB (nc_istat); 3815 if (istat & INTF) { 3816 OUTB (nc_istat, (istat & SIGP) | INTF | np->istat_sem); 3817 istat = INB (nc_istat); /* DUMMY READ */ 3818 if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); 3819 (void)sym_wakeup_done (np); 3820 } 3821 3822 if (!(istat & (SIP|DIP))) 3823 return; 3824 3825 #if 0 /* We should never get this one */ 3826 if (istat & CABRT) 3827 OUTB (nc_istat, CABRT); 3828 #endif 3829 3830 /* 3831 * PAR and MA interrupts may occur at the same time, 3832 * and we need to know of both in order to handle 3833 * this situation properly. We try to unstack SCSI 3834 * interrupts for that reason. BTW, I dislike a LOT 3835 * such a loop inside the interrupt routine. 3836 * Even if DMA interrupt stacking is very unlikely to 3837 * happen, we also try unstacking these ones, since 3838 * this has no performance impact. 3839 */ 3840 sist = 0; 3841 dstat = 0; 3842 istatc = istat; 3843 do { 3844 if (istatc & SIP) 3845 sist |= INW (nc_sist); 3846 if (istatc & DIP) 3847 dstat |= INB (nc_dstat); 3848 istatc = INB (nc_istat); 3849 istat |= istatc; 3850 } while (istatc & (SIP|DIP)); 3851 3852 if (DEBUG_FLAGS & DEBUG_TINY) 3853 printf ("<%d|%x:%x|%x:%x>", 3854 (int)INB(nc_scr0), 3855 dstat,sist, 3856 (unsigned)INL(nc_dsp), 3857 (unsigned)INL(nc_dbc)); 3858 /* 3859 * On paper, a memory barrier may be needed here. 3860 * And since we are paranoid ... :) 3861 */ 3862 MEMORY_BARRIER(); 3863 3864 /* 3865 * First, interrupts we want to service cleanly. 3866 * 3867 * Phase mismatch (MA) is the most frequent interrupt 3868 * for chip earlier than the 896 and so we have to service 3869 * it as quickly as possible. 3870 * A SCSI parity error (PAR) may be combined with a phase 3871 * mismatch condition (MA). 3872 * Programmed interrupts (SIR) are used to call the C code 3873 * from SCRIPTS. 3874 * The single step interrupt (SSI) is not used in this 3875 * driver. 3876 */ 3877 if (!(sist & (STO|GEN|HTH|SGE|UDC|SBMC|RST)) && 3878 !(dstat & (MDPE|BF|ABRT|IID))) { 3879 if (sist & PAR) sym_int_par (np, sist); 3880 else if (sist & MA) sym_int_ma (np); 3881 else if (dstat & SIR) sym_int_sir (np); 3882 else if (dstat & SSI) OUTONB_STD (); 3883 else goto unknown_int; 3884 return; 3885 } 3886 3887 /* 3888 * Now, interrupts that donnot happen in normal 3889 * situations and that we may need to recover from. 3890 * 3891 * On SCSI RESET (RST), we reset everything. 3892 * On SCSI BUS MODE CHANGE (SBMC), we complete all 3893 * active CCBs with RESET status, prepare all devices 3894 * for negotiating again and restart the SCRIPTS. 3895 * On STO and UDC, we complete the CCB with the corres- 3896 * ponding status and restart the SCRIPTS. 3897 */ 3898 if (sist & RST) { 3899 xpt_print_path(np->path); 3900 printf("SCSI BUS reset detected.\n"); 3901 sym_init (np, 1); 3902 return; 3903 } 3904 3905 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 3906 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 3907 3908 if (!(sist & (GEN|HTH|SGE)) && 3909 !(dstat & (MDPE|BF|ABRT|IID))) { 3910 if (sist & SBMC) sym_int_sbmc (np); 3911 else if (sist & STO) sym_int_sto (np); 3912 else if (sist & UDC) sym_int_udc (np); 3913 else goto unknown_int; 3914 return; 3915 } 3916 3917 /* 3918 * Now, interrupts we are not able to recover cleanly. 3919 * 3920 * Log message for hard errors. 3921 * Reset everything. 3922 */ 3923 3924 sym_log_hard_error(np, sist, dstat); 3925 3926 if ((sist & (GEN|HTH|SGE)) || 3927 (dstat & (MDPE|BF|ABRT|IID))) { 3928 sym_start_reset(np); 3929 return; 3930 } 3931 3932 unknown_int: 3933 /* 3934 * We just miss the cause of the interrupt. :( 3935 * Print a message. The timeout will do the real work. 3936 */ 3937 printf( "%s: unknown interrupt(s) ignored, " 3938 "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n", 3939 sym_name(np), istat, dstat, sist); 3940 } 3941 3942 static void sym_intr(void *arg) 3943 { 3944 hcb_p np = arg; 3945 3946 SYM_LOCK(); 3947 3948 if (DEBUG_FLAGS & DEBUG_TINY) printf ("["); 3949 sym_intr1((hcb_p) arg); 3950 if (DEBUG_FLAGS & DEBUG_TINY) printf ("]"); 3951 3952 SYM_UNLOCK(); 3953 } 3954 3955 static void sym_poll(struct cam_sim *sim) 3956 { 3957 sym_intr1(cam_sim_softc(sim)); 3958 } 3959 3960 /* 3961 * generic recovery from scsi interrupt 3962 * 3963 * The doc says that when the chip gets an SCSI interrupt, 3964 * it tries to stop in an orderly fashion, by completing 3965 * an instruction fetch that had started or by flushing 3966 * the DMA fifo for a write to memory that was executing. 3967 * Such a fashion is not enough to know if the instruction 3968 * that was just before the current DSP value has been 3969 * executed or not. 3970 * 3971 * There are some small SCRIPTS sections that deal with 3972 * the start queue and the done queue that may break any 3973 * assomption from the C code if we are interrupted 3974 * inside, so we reset if this happens. Btw, since these 3975 * SCRIPTS sections are executed while the SCRIPTS hasn't 3976 * started SCSI operations, it is very unlikely to happen. 3977 * 3978 * All the driver data structures are supposed to be 3979 * allocated from the same 4 GB memory window, so there 3980 * is a 1 to 1 relationship between DSA and driver data 3981 * structures. Since we are careful :) to invalidate the 3982 * DSA when we complete a command or when the SCRIPTS 3983 * pushes a DSA into a queue, we can trust it when it 3984 * points to a CCB. 3985 */ 3986 static void sym_recover_scsi_int (hcb_p np, u_char hsts) 3987 { 3988 u32 dsp = INL (nc_dsp); 3989 u32 dsa = INL (nc_dsa); 3990 ccb_p cp = sym_ccb_from_dsa(np, dsa); 3991 3992 /* 3993 * If we haven't been interrupted inside the SCRIPTS 3994 * critical paths, we can safely restart the SCRIPTS 3995 * and trust the DSA value if it matches a CCB. 3996 */ 3997 if ((!(dsp > SCRIPTA_BA (np, getjob_begin) && 3998 dsp < SCRIPTA_BA (np, getjob_end) + 1)) && 3999 (!(dsp > SCRIPTA_BA (np, ungetjob) && 4000 dsp < SCRIPTA_BA (np, reselect) + 1)) && 4001 (!(dsp > SCRIPTB_BA (np, sel_for_abort) && 4002 dsp < SCRIPTB_BA (np, sel_for_abort_1) + 1)) && 4003 (!(dsp > SCRIPTA_BA (np, done) && 4004 dsp < SCRIPTA_BA (np, done_end) + 1))) { 4005 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 4006 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 4007 /* 4008 * If we have a CCB, let the SCRIPTS call us back for 4009 * the handling of the error with SCRATCHA filled with 4010 * STARTPOS. This way, we will be able to freeze the 4011 * device queue and requeue awaiting IOs. 4012 */ 4013 if (cp) { 4014 cp->host_status = hsts; 4015 OUTL_DSP (SCRIPTA_BA (np, complete_error)); 4016 } 4017 /* 4018 * Otherwise just restart the SCRIPTS. 4019 */ 4020 else { 4021 OUTL (nc_dsa, 0xffffff); 4022 OUTL_DSP (SCRIPTA_BA (np, start)); 4023 } 4024 } 4025 else 4026 goto reset_all; 4027 4028 return; 4029 4030 reset_all: 4031 sym_start_reset(np); 4032 } 4033 4034 /* 4035 * chip exception handler for selection timeout 4036 */ 4037 static void sym_int_sto (hcb_p np) 4038 { 4039 u32 dsp = INL (nc_dsp); 4040 4041 if (DEBUG_FLAGS & DEBUG_TINY) printf ("T"); 4042 4043 if (dsp == SCRIPTA_BA (np, wf_sel_done) + 8) 4044 sym_recover_scsi_int(np, HS_SEL_TIMEOUT); 4045 else 4046 sym_start_reset(np); 4047 } 4048 4049 /* 4050 * chip exception handler for unexpected disconnect 4051 */ 4052 static void sym_int_udc (hcb_p np) 4053 { 4054 printf ("%s: unexpected disconnect\n", sym_name(np)); 4055 sym_recover_scsi_int(np, HS_UNEXPECTED); 4056 } 4057 4058 /* 4059 * chip exception handler for SCSI bus mode change 4060 * 4061 * spi2-r12 11.2.3 says a transceiver mode change must 4062 * generate a reset event and a device that detects a reset 4063 * event shall initiate a hard reset. It says also that a 4064 * device that detects a mode change shall set data transfer 4065 * mode to eight bit asynchronous, etc... 4066 * So, just reinitializing all except chip should be enough. 4067 */ 4068 static void sym_int_sbmc (hcb_p np) 4069 { 4070 u_char scsi_mode = INB (nc_stest4) & SMODE; 4071 4072 /* 4073 * Notify user. 4074 */ 4075 xpt_print_path(np->path); 4076 printf("SCSI BUS mode change from %s to %s.\n", 4077 sym_scsi_bus_mode(np->scsi_mode), sym_scsi_bus_mode(scsi_mode)); 4078 4079 /* 4080 * Should suspend command processing for a few seconds and 4081 * reinitialize all except the chip. 4082 */ 4083 sym_init (np, 2); 4084 } 4085 4086 /* 4087 * chip exception handler for SCSI parity error. 4088 * 4089 * When the chip detects a SCSI parity error and is 4090 * currently executing a (CH)MOV instruction, it does 4091 * not interrupt immediately, but tries to finish the 4092 * transfer of the current scatter entry before 4093 * interrupting. The following situations may occur: 4094 * 4095 * - The complete scatter entry has been transferred 4096 * without the device having changed phase. 4097 * The chip will then interrupt with the DSP pointing 4098 * to the instruction that follows the MOV. 4099 * 4100 * - A phase mismatch occurs before the MOV finished 4101 * and phase errors are to be handled by the C code. 4102 * The chip will then interrupt with both PAR and MA 4103 * conditions set. 4104 * 4105 * - A phase mismatch occurs before the MOV finished and 4106 * phase errors are to be handled by SCRIPTS. 4107 * The chip will load the DSP with the phase mismatch 4108 * JUMP address and interrupt the host processor. 4109 */ 4110 static void sym_int_par (hcb_p np, u_short sist) 4111 { 4112 u_char hsts = INB (HS_PRT); 4113 u32 dsp = INL (nc_dsp); 4114 u32 dbc = INL (nc_dbc); 4115 u32 dsa = INL (nc_dsa); 4116 u_char sbcl = INB (nc_sbcl); 4117 u_char cmd = dbc >> 24; 4118 int phase = cmd & 7; 4119 ccb_p cp = sym_ccb_from_dsa(np, dsa); 4120 4121 printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n", 4122 sym_name(np), hsts, dbc, sbcl); 4123 4124 /* 4125 * Check that the chip is connected to the SCSI BUS. 4126 */ 4127 if (!(INB (nc_scntl1) & ISCON)) { 4128 sym_recover_scsi_int(np, HS_UNEXPECTED); 4129 return; 4130 } 4131 4132 /* 4133 * If the nexus is not clearly identified, reset the bus. 4134 * We will try to do better later. 4135 */ 4136 if (!cp) 4137 goto reset_all; 4138 4139 /* 4140 * Check instruction was a MOV, direction was INPUT and 4141 * ATN is asserted. 4142 */ 4143 if ((cmd & 0xc0) || !(phase & 1) || !(sbcl & 0x8)) 4144 goto reset_all; 4145 4146 /* 4147 * Keep track of the parity error. 4148 */ 4149 OUTONB (HF_PRT, HF_EXT_ERR); 4150 cp->xerr_status |= XE_PARITY_ERR; 4151 4152 /* 4153 * Prepare the message to send to the device. 4154 */ 4155 np->msgout[0] = (phase == 7) ? M_PARITY : M_ID_ERROR; 4156 4157 /* 4158 * If the old phase was DATA IN phase, we have to deal with 4159 * the 3 situations described above. 4160 * For other input phases (MSG IN and STATUS), the device 4161 * must resend the whole thing that failed parity checking 4162 * or signal error. So, jumping to dispatcher should be OK. 4163 */ 4164 if (phase == 1 || phase == 5) { 4165 /* Phase mismatch handled by SCRIPTS */ 4166 if (dsp == SCRIPTB_BA (np, pm_handle)) 4167 OUTL_DSP (dsp); 4168 /* Phase mismatch handled by the C code */ 4169 else if (sist & MA) 4170 sym_int_ma (np); 4171 /* No phase mismatch occurred */ 4172 else { 4173 OUTL (nc_temp, dsp); 4174 OUTL_DSP (SCRIPTA_BA (np, dispatch)); 4175 } 4176 } 4177 else 4178 OUTL_DSP (SCRIPTA_BA (np, clrack)); 4179 return; 4180 4181 reset_all: 4182 sym_start_reset(np); 4183 } 4184 4185 /* 4186 * chip exception handler for phase errors. 4187 * 4188 * We have to construct a new transfer descriptor, 4189 * to transfer the rest of the current block. 4190 */ 4191 static void sym_int_ma (hcb_p np) 4192 { 4193 u32 dbc; 4194 u32 rest; 4195 u32 dsp; 4196 u32 dsa; 4197 u32 nxtdsp; 4198 u32 *vdsp; 4199 u32 oadr, olen; 4200 u32 *tblp; 4201 u32 newcmd; 4202 u_int delta; 4203 u_char cmd; 4204 u_char hflags, hflags0; 4205 struct sym_pmc *pm; 4206 ccb_p cp; 4207 4208 dsp = INL (nc_dsp); 4209 dbc = INL (nc_dbc); 4210 dsa = INL (nc_dsa); 4211 4212 cmd = dbc >> 24; 4213 rest = dbc & 0xffffff; 4214 delta = 0; 4215 4216 /* 4217 * locate matching cp if any. 4218 */ 4219 cp = sym_ccb_from_dsa(np, dsa); 4220 4221 /* 4222 * Donnot take into account dma fifo and various buffers in 4223 * INPUT phase since the chip flushes everything before 4224 * raising the MA interrupt for interrupted INPUT phases. 4225 * For DATA IN phase, we will check for the SWIDE later. 4226 */ 4227 if ((cmd & 7) != 1 && (cmd & 7) != 5) { 4228 u_char ss0, ss2; 4229 4230 if (np->features & FE_DFBC) 4231 delta = INW (nc_dfbc); 4232 else { 4233 u32 dfifo; 4234 4235 /* 4236 * Read DFIFO, CTEST[4-6] using 1 PCI bus ownership. 4237 */ 4238 dfifo = INL(nc_dfifo); 4239 4240 /* 4241 * Calculate remaining bytes in DMA fifo. 4242 * (CTEST5 = dfifo >> 16) 4243 */ 4244 if (dfifo & (DFS << 16)) 4245 delta = ((((dfifo >> 8) & 0x300) | 4246 (dfifo & 0xff)) - rest) & 0x3ff; 4247 else 4248 delta = ((dfifo & 0xff) - rest) & 0x7f; 4249 } 4250 4251 /* 4252 * The data in the dma fifo has not been transferred to 4253 * the target -> add the amount to the rest 4254 * and clear the data. 4255 * Check the sstat2 register in case of wide transfer. 4256 */ 4257 rest += delta; 4258 ss0 = INB (nc_sstat0); 4259 if (ss0 & OLF) rest++; 4260 if (!(np->features & FE_C10)) 4261 if (ss0 & ORF) rest++; 4262 if (cp && (cp->phys.select.sel_scntl3 & EWS)) { 4263 ss2 = INB (nc_sstat2); 4264 if (ss2 & OLF1) rest++; 4265 if (!(np->features & FE_C10)) 4266 if (ss2 & ORF1) rest++; 4267 } 4268 4269 /* 4270 * Clear fifos. 4271 */ 4272 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* dma fifo */ 4273 OUTB (nc_stest3, TE|CSF); /* scsi fifo */ 4274 } 4275 4276 /* 4277 * log the information 4278 */ 4279 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) 4280 printf ("P%x%x RL=%d D=%d ", cmd&7, INB(nc_sbcl)&7, 4281 (unsigned) rest, (unsigned) delta); 4282 4283 /* 4284 * try to find the interrupted script command, 4285 * and the address at which to continue. 4286 */ 4287 vdsp = NULL; 4288 nxtdsp = 0; 4289 if (dsp > np->scripta_ba && 4290 dsp <= np->scripta_ba + np->scripta_sz) { 4291 vdsp = (u32 *)((char*)np->scripta0 + (dsp-np->scripta_ba-8)); 4292 nxtdsp = dsp; 4293 } 4294 else if (dsp > np->scriptb_ba && 4295 dsp <= np->scriptb_ba + np->scriptb_sz) { 4296 vdsp = (u32 *)((char*)np->scriptb0 + (dsp-np->scriptb_ba-8)); 4297 nxtdsp = dsp; 4298 } 4299 4300 /* 4301 * log the information 4302 */ 4303 if (DEBUG_FLAGS & DEBUG_PHASE) { 4304 printf ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", 4305 cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd); 4306 } 4307 4308 if (!vdsp) { 4309 printf ("%s: interrupted SCRIPT address not found.\n", 4310 sym_name (np)); 4311 goto reset_all; 4312 } 4313 4314 if (!cp) { 4315 printf ("%s: SCSI phase error fixup: CCB already dequeued.\n", 4316 sym_name (np)); 4317 goto reset_all; 4318 } 4319 4320 /* 4321 * get old startaddress and old length. 4322 */ 4323 oadr = scr_to_cpu(vdsp[1]); 4324 4325 if (cmd & 0x10) { /* Table indirect */ 4326 tblp = (u32 *) ((char*) &cp->phys + oadr); 4327 olen = scr_to_cpu(tblp[0]); 4328 oadr = scr_to_cpu(tblp[1]); 4329 } else { 4330 tblp = (u32 *) 0; 4331 olen = scr_to_cpu(vdsp[0]) & 0xffffff; 4332 } 4333 4334 if (DEBUG_FLAGS & DEBUG_PHASE) { 4335 printf ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n", 4336 (unsigned) (scr_to_cpu(vdsp[0]) >> 24), 4337 tblp, 4338 (unsigned) olen, 4339 (unsigned) oadr); 4340 } 4341 4342 /* 4343 * check cmd against assumed interrupted script command. 4344 * If dt data phase, the MOVE instruction hasn't bit 4 of 4345 * the phase. 4346 */ 4347 if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0]) >> 24)) { 4348 PRINT_ADDR(cp); 4349 printf ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n", 4350 (unsigned)cmd, (unsigned)scr_to_cpu(vdsp[0]) >> 24); 4351 4352 goto reset_all; 4353 } 4354 4355 /* 4356 * if old phase not dataphase, leave here. 4357 */ 4358 if (cmd & 2) { 4359 PRINT_ADDR(cp); 4360 printf ("phase change %x-%x %d@%08x resid=%d.\n", 4361 cmd&7, INB(nc_sbcl)&7, (unsigned)olen, 4362 (unsigned)oadr, (unsigned)rest); 4363 goto unexpected_phase; 4364 } 4365 4366 /* 4367 * Choose the correct PM save area. 4368 * 4369 * Look at the PM_SAVE SCRIPT if you want to understand 4370 * this stuff. The equivalent code is implemented in 4371 * SCRIPTS for the 895A, 896 and 1010 that are able to 4372 * handle PM from the SCRIPTS processor. 4373 */ 4374 hflags0 = INB (HF_PRT); 4375 hflags = hflags0; 4376 4377 if (hflags & (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED)) { 4378 if (hflags & HF_IN_PM0) 4379 nxtdsp = scr_to_cpu(cp->phys.pm0.ret); 4380 else if (hflags & HF_IN_PM1) 4381 nxtdsp = scr_to_cpu(cp->phys.pm1.ret); 4382 4383 if (hflags & HF_DP_SAVED) 4384 hflags ^= HF_ACT_PM; 4385 } 4386 4387 if (!(hflags & HF_ACT_PM)) { 4388 pm = &cp->phys.pm0; 4389 newcmd = SCRIPTA_BA (np, pm0_data); 4390 } 4391 else { 4392 pm = &cp->phys.pm1; 4393 newcmd = SCRIPTA_BA (np, pm1_data); 4394 } 4395 4396 hflags &= ~(HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED); 4397 if (hflags != hflags0) 4398 OUTB (HF_PRT, hflags); 4399 4400 /* 4401 * fillin the phase mismatch context 4402 */ 4403 pm->sg.addr = cpu_to_scr(oadr + olen - rest); 4404 pm->sg.size = cpu_to_scr(rest); 4405 pm->ret = cpu_to_scr(nxtdsp); 4406 4407 /* 4408 * If we have a SWIDE, 4409 * - prepare the address to write the SWIDE from SCRIPTS, 4410 * - compute the SCRIPTS address to restart from, 4411 * - move current data pointer context by one byte. 4412 */ 4413 nxtdsp = SCRIPTA_BA (np, dispatch); 4414 if ((cmd & 7) == 1 && cp && (cp->phys.select.sel_scntl3 & EWS) && 4415 (INB (nc_scntl2) & WSR)) { 4416 u32 tmp; 4417 4418 /* 4419 * Set up the table indirect for the MOVE 4420 * of the residual byte and adjust the data 4421 * pointer context. 4422 */ 4423 tmp = scr_to_cpu(pm->sg.addr); 4424 cp->phys.wresid.addr = cpu_to_scr(tmp); 4425 pm->sg.addr = cpu_to_scr(tmp + 1); 4426 tmp = scr_to_cpu(pm->sg.size); 4427 cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) | 1); 4428 pm->sg.size = cpu_to_scr(tmp - 1); 4429 4430 /* 4431 * If only the residual byte is to be moved, 4432 * no PM context is needed. 4433 */ 4434 if ((tmp&0xffffff) == 1) 4435 newcmd = pm->ret; 4436 4437 /* 4438 * Prepare the address of SCRIPTS that will 4439 * move the residual byte to memory. 4440 */ 4441 nxtdsp = SCRIPTB_BA (np, wsr_ma_helper); 4442 } 4443 4444 if (DEBUG_FLAGS & DEBUG_PHASE) { 4445 PRINT_ADDR(cp); 4446 printf ("PM %x %x %x / %x %x %x.\n", 4447 hflags0, hflags, newcmd, 4448 (unsigned)scr_to_cpu(pm->sg.addr), 4449 (unsigned)scr_to_cpu(pm->sg.size), 4450 (unsigned)scr_to_cpu(pm->ret)); 4451 } 4452 4453 /* 4454 * Restart the SCRIPTS processor. 4455 */ 4456 OUTL (nc_temp, newcmd); 4457 OUTL_DSP (nxtdsp); 4458 return; 4459 4460 /* 4461 * Unexpected phase changes that occurs when the current phase 4462 * is not a DATA IN or DATA OUT phase are due to error conditions. 4463 * Such event may only happen when the SCRIPTS is using a 4464 * multibyte SCSI MOVE. 4465 * 4466 * Phase change Some possible cause 4467 * 4468 * COMMAND --> MSG IN SCSI parity error detected by target. 4469 * COMMAND --> STATUS Bad command or refused by target. 4470 * MSG OUT --> MSG IN Message rejected by target. 4471 * MSG OUT --> COMMAND Bogus target that discards extended 4472 * negotiation messages. 4473 * 4474 * The code below does not care of the new phase and so 4475 * trusts the target. Why to annoy it ? 4476 * If the interrupted phase is COMMAND phase, we restart at 4477 * dispatcher. 4478 * If a target does not get all the messages after selection, 4479 * the code assumes blindly that the target discards extended 4480 * messages and clears the negotiation status. 4481 * If the target does not want all our response to negotiation, 4482 * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 4483 * bloat for such a should_not_happen situation). 4484 * In all other situation, we reset the BUS. 4485 * Are these assumptions reasonnable ? (Wait and see ...) 4486 */ 4487 unexpected_phase: 4488 dsp -= 8; 4489 nxtdsp = 0; 4490 4491 switch (cmd & 7) { 4492 case 2: /* COMMAND phase */ 4493 nxtdsp = SCRIPTA_BA (np, dispatch); 4494 break; 4495 #if 0 4496 case 3: /* STATUS phase */ 4497 nxtdsp = SCRIPTA_BA (np, dispatch); 4498 break; 4499 #endif 4500 case 6: /* MSG OUT phase */ 4501 /* 4502 * If the device may want to use untagged when we want 4503 * tagged, we prepare an IDENTIFY without disc. granted, 4504 * since we will not be able to handle reselect. 4505 * Otherwise, we just don't care. 4506 */ 4507 if (dsp == SCRIPTA_BA (np, send_ident)) { 4508 if (cp->tag != NO_TAG && olen - rest <= 3) { 4509 cp->host_status = HS_BUSY; 4510 np->msgout[0] = M_IDENTIFY | cp->lun; 4511 nxtdsp = SCRIPTB_BA (np, ident_break_atn); 4512 } 4513 else 4514 nxtdsp = SCRIPTB_BA (np, ident_break); 4515 } 4516 else if (dsp == SCRIPTB_BA (np, send_wdtr) || 4517 dsp == SCRIPTB_BA (np, send_sdtr) || 4518 dsp == SCRIPTB_BA (np, send_ppr)) { 4519 nxtdsp = SCRIPTB_BA (np, nego_bad_phase); 4520 } 4521 break; 4522 #if 0 4523 case 7: /* MSG IN phase */ 4524 nxtdsp = SCRIPTA_BA (np, clrack); 4525 break; 4526 #endif 4527 } 4528 4529 if (nxtdsp) { 4530 OUTL_DSP (nxtdsp); 4531 return; 4532 } 4533 4534 reset_all: 4535 sym_start_reset(np); 4536 } 4537 4538 /* 4539 * Dequeue from the START queue all CCBs that match 4540 * a given target/lun/task condition (-1 means all), 4541 * and move them from the BUSY queue to the COMP queue 4542 * with CAM_REQUEUE_REQ status condition. 4543 * This function is used during error handling/recovery. 4544 * It is called with SCRIPTS not running. 4545 */ 4546 static int 4547 sym_dequeue_from_squeue(hcb_p np, int i, int target, int lun, int task) 4548 { 4549 int j; 4550 ccb_p cp; 4551 4552 /* 4553 * Make sure the starting index is within range. 4554 */ 4555 assert((i >= 0) && (i < 2*MAX_QUEUE)); 4556 4557 /* 4558 * Walk until end of START queue and dequeue every job 4559 * that matches the target/lun/task condition. 4560 */ 4561 j = i; 4562 while (i != np->squeueput) { 4563 cp = sym_ccb_from_dsa(np, scr_to_cpu(np->squeue[i])); 4564 assert(cp); 4565 #ifdef SYM_CONF_IARB_SUPPORT 4566 /* Forget hints for IARB, they may be no longer relevant */ 4567 cp->host_flags &= ~HF_HINT_IARB; 4568 #endif 4569 if ((target == -1 || cp->target == target) && 4570 (lun == -1 || cp->lun == lun) && 4571 (task == -1 || cp->tag == task)) { 4572 sym_set_cam_status(cp->cam_ccb, CAM_REQUEUE_REQ); 4573 sym_remque(&cp->link_ccbq); 4574 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); 4575 } 4576 else { 4577 if (i != j) 4578 np->squeue[j] = np->squeue[i]; 4579 if ((j += 2) >= MAX_QUEUE*2) j = 0; 4580 } 4581 if ((i += 2) >= MAX_QUEUE*2) i = 0; 4582 } 4583 if (i != j) /* Copy back the idle task if needed */ 4584 np->squeue[j] = np->squeue[i]; 4585 np->squeueput = j; /* Update our current start queue pointer */ 4586 4587 return (i - j) / 2; 4588 } 4589 4590 /* 4591 * Complete all CCBs queued to the COMP queue. 4592 * 4593 * These CCBs are assumed: 4594 * - Not to be referenced either by devices or 4595 * SCRIPTS-related queues and datas. 4596 * - To have to be completed with an error condition 4597 * or requeued. 4598 * 4599 * The device queue freeze count is incremented 4600 * for each CCB that does not prevent this. 4601 * This function is called when all CCBs involved 4602 * in error handling/recovery have been reaped. 4603 */ 4604 static void 4605 sym_flush_comp_queue(hcb_p np, int cam_status) 4606 { 4607 SYM_QUEHEAD *qp; 4608 ccb_p cp; 4609 4610 while ((qp = sym_remque_head(&np->comp_ccbq)) != NULL) { 4611 union ccb *ccb; 4612 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4613 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 4614 /* Leave quiet CCBs waiting for resources */ 4615 if (cp->host_status == HS_WAIT) 4616 continue; 4617 ccb = cp->cam_ccb; 4618 if (cam_status) 4619 sym_set_cam_status(ccb, cam_status); 4620 sym_freeze_cam_ccb(ccb); 4621 sym_xpt_done(np, ccb, cp); 4622 sym_free_ccb(np, cp); 4623 } 4624 } 4625 4626 /* 4627 * chip handler for bad SCSI status condition 4628 * 4629 * In case of bad SCSI status, we unqueue all the tasks 4630 * currently queued to the controller but not yet started 4631 * and then restart the SCRIPTS processor immediately. 4632 * 4633 * QUEUE FULL and BUSY conditions are handled the same way. 4634 * Basically all the not yet started tasks are requeued in 4635 * device queue and the queue is frozen until a completion. 4636 * 4637 * For CHECK CONDITION and COMMAND TERMINATED status, we use 4638 * the CCB of the failed command to prepare a REQUEST SENSE 4639 * SCSI command and queue it to the controller queue. 4640 * 4641 * SCRATCHA is assumed to have been loaded with STARTPOS 4642 * before the SCRIPTS called the C code. 4643 */ 4644 static void sym_sir_bad_scsi_status(hcb_p np, ccb_p cp) 4645 { 4646 tcb_p tp = &np->target[cp->target]; 4647 u32 startp; 4648 u_char s_status = cp->ssss_status; 4649 u_char h_flags = cp->host_flags; 4650 int msglen; 4651 int nego; 4652 int i; 4653 4654 SYM_LOCK_ASSERT(MA_OWNED); 4655 4656 /* 4657 * Compute the index of the next job to start from SCRIPTS. 4658 */ 4659 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 4660 4661 /* 4662 * The last CCB queued used for IARB hint may be 4663 * no longer relevant. Forget it. 4664 */ 4665 #ifdef SYM_CONF_IARB_SUPPORT 4666 if (np->last_cp) 4667 np->last_cp = NULL; 4668 #endif 4669 4670 /* 4671 * Now deal with the SCSI status. 4672 */ 4673 switch(s_status) { 4674 case S_BUSY: 4675 case S_QUEUE_FULL: 4676 if (sym_verbose >= 2) { 4677 PRINT_ADDR(cp); 4678 printf (s_status == S_BUSY ? "BUSY" : "QUEUE FULL\n"); 4679 } 4680 /* FALLTHROUGH */ 4681 default: /* S_INT, S_INT_COND_MET, S_CONFLICT */ 4682 sym_complete_error (np, cp); 4683 break; 4684 case S_TERMINATED: 4685 case S_CHECK_COND: 4686 /* 4687 * If we get an SCSI error when requesting sense, give up. 4688 */ 4689 if (h_flags & HF_SENSE) { 4690 sym_complete_error (np, cp); 4691 break; 4692 } 4693 4694 /* 4695 * Dequeue all queued CCBs for that device not yet started, 4696 * and restart the SCRIPTS processor immediately. 4697 */ 4698 (void) sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 4699 OUTL_DSP (SCRIPTA_BA (np, start)); 4700 4701 /* 4702 * Save some info of the actual IO. 4703 * Compute the data residual. 4704 */ 4705 cp->sv_scsi_status = cp->ssss_status; 4706 cp->sv_xerr_status = cp->xerr_status; 4707 cp->sv_resid = sym_compute_residual(np, cp); 4708 4709 /* 4710 * Prepare all needed data structures for 4711 * requesting sense data. 4712 */ 4713 4714 /* 4715 * identify message 4716 */ 4717 cp->scsi_smsg2[0] = M_IDENTIFY | cp->lun; 4718 msglen = 1; 4719 4720 /* 4721 * If we are currently using anything different from 4722 * async. 8 bit data transfers with that target, 4723 * start a negotiation, since the device may want 4724 * to report us a UNIT ATTENTION condition due to 4725 * a cause we currently ignore, and we donnot want 4726 * to be stuck with WIDE and/or SYNC data transfer. 4727 * 4728 * cp->nego_status is filled by sym_prepare_nego(). 4729 */ 4730 cp->nego_status = 0; 4731 nego = 0; 4732 if (tp->tinfo.current.options & PPR_OPT_MASK) 4733 nego = NS_PPR; 4734 else if (tp->tinfo.current.width != BUS_8_BIT) 4735 nego = NS_WIDE; 4736 else if (tp->tinfo.current.offset != 0) 4737 nego = NS_SYNC; 4738 if (nego) 4739 msglen += 4740 sym_prepare_nego (np,cp, nego, &cp->scsi_smsg2[msglen]); 4741 /* 4742 * Message table indirect structure. 4743 */ 4744 cp->phys.smsg.addr = cpu_to_scr(CCB_BA (cp, scsi_smsg2)); 4745 cp->phys.smsg.size = cpu_to_scr(msglen); 4746 4747 /* 4748 * sense command 4749 */ 4750 cp->phys.cmd.addr = cpu_to_scr(CCB_BA (cp, sensecmd)); 4751 cp->phys.cmd.size = cpu_to_scr(6); 4752 4753 /* 4754 * patch requested size into sense command 4755 */ 4756 cp->sensecmd[0] = 0x03; 4757 cp->sensecmd[1] = cp->lun << 5; 4758 if (tp->tinfo.current.scsi_version > 2 || cp->lun > 7) 4759 cp->sensecmd[1] = 0; 4760 cp->sensecmd[4] = SYM_SNS_BBUF_LEN; 4761 cp->data_len = SYM_SNS_BBUF_LEN; 4762 4763 /* 4764 * sense data 4765 */ 4766 bzero(cp->sns_bbuf, SYM_SNS_BBUF_LEN); 4767 cp->phys.sense.addr = cpu_to_scr(vtobus(cp->sns_bbuf)); 4768 cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN); 4769 4770 /* 4771 * requeue the command. 4772 */ 4773 startp = SCRIPTB_BA (np, sdata_in); 4774 4775 cp->phys.head.savep = cpu_to_scr(startp); 4776 cp->phys.head.goalp = cpu_to_scr(startp + 16); 4777 cp->phys.head.lastp = cpu_to_scr(startp); 4778 cp->startp = cpu_to_scr(startp); 4779 4780 cp->actualquirks = SYM_QUIRK_AUTOSAVE; 4781 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 4782 cp->ssss_status = S_ILLEGAL; 4783 cp->host_flags = (HF_SENSE|HF_DATA_IN); 4784 cp->xerr_status = 0; 4785 cp->extra_bytes = 0; 4786 4787 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, select)); 4788 4789 /* 4790 * Requeue the command. 4791 */ 4792 sym_put_start_queue(np, cp); 4793 4794 /* 4795 * Give back to upper layer everything we have dequeued. 4796 */ 4797 sym_flush_comp_queue(np, 0); 4798 break; 4799 } 4800 } 4801 4802 /* 4803 * After a device has accepted some management message 4804 * as BUS DEVICE RESET, ABORT TASK, etc ..., or when 4805 * a device signals a UNIT ATTENTION condition, some 4806 * tasks are thrown away by the device. We are required 4807 * to reflect that on our tasks list since the device 4808 * will never complete these tasks. 4809 * 4810 * This function move from the BUSY queue to the COMP 4811 * queue all disconnected CCBs for a given target that 4812 * match the following criteria: 4813 * - lun=-1 means any logical UNIT otherwise a given one. 4814 * - task=-1 means any task, otherwise a given one. 4815 */ 4816 static int 4817 sym_clear_tasks(hcb_p np, int cam_status, int target, int lun, int task) 4818 { 4819 SYM_QUEHEAD qtmp, *qp; 4820 int i = 0; 4821 ccb_p cp; 4822 4823 /* 4824 * Move the entire BUSY queue to our temporary queue. 4825 */ 4826 sym_que_init(&qtmp); 4827 sym_que_splice(&np->busy_ccbq, &qtmp); 4828 sym_que_init(&np->busy_ccbq); 4829 4830 /* 4831 * Put all CCBs that matches our criteria into 4832 * the COMP queue and put back other ones into 4833 * the BUSY queue. 4834 */ 4835 while ((qp = sym_remque_head(&qtmp)) != NULL) { 4836 union ccb *ccb; 4837 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4838 ccb = cp->cam_ccb; 4839 if (cp->host_status != HS_DISCONNECT || 4840 cp->target != target || 4841 (lun != -1 && cp->lun != lun) || 4842 (task != -1 && 4843 (cp->tag != NO_TAG && cp->scsi_smsg[2] != task))) { 4844 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 4845 continue; 4846 } 4847 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); 4848 4849 /* Preserve the software timeout condition */ 4850 if (sym_get_cam_status(ccb) != CAM_CMD_TIMEOUT) 4851 sym_set_cam_status(ccb, cam_status); 4852 ++i; 4853 #if 0 4854 printf("XXXX TASK @%p CLEARED\n", cp); 4855 #endif 4856 } 4857 return i; 4858 } 4859 4860 /* 4861 * chip handler for TASKS recovery 4862 * 4863 * We cannot safely abort a command, while the SCRIPTS 4864 * processor is running, since we just would be in race 4865 * with it. 4866 * 4867 * As long as we have tasks to abort, we keep the SEM 4868 * bit set in the ISTAT. When this bit is set, the 4869 * SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED) 4870 * each time it enters the scheduler. 4871 * 4872 * If we have to reset a target, clear tasks of a unit, 4873 * or to perform the abort of a disconnected job, we 4874 * restart the SCRIPTS for selecting the target. Once 4875 * selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED). 4876 * If it loses arbitration, the SCRIPTS will interrupt again 4877 * the next time it will enter its scheduler, and so on ... 4878 * 4879 * On SIR_TARGET_SELECTED, we scan for the more 4880 * appropriate thing to do: 4881 * 4882 * - If nothing, we just sent a M_ABORT message to the 4883 * target to get rid of the useless SCSI bus ownership. 4884 * According to the specs, no tasks shall be affected. 4885 * - If the target is to be reset, we send it a M_RESET 4886 * message. 4887 * - If a logical UNIT is to be cleared , we send the 4888 * IDENTIFY(lun) + M_ABORT. 4889 * - If an untagged task is to be aborted, we send the 4890 * IDENTIFY(lun) + M_ABORT. 4891 * - If a tagged task is to be aborted, we send the 4892 * IDENTIFY(lun) + task attributes + M_ABORT_TAG. 4893 * 4894 * Once our 'kiss of death' :) message has been accepted 4895 * by the target, the SCRIPTS interrupts again 4896 * (SIR_ABORT_SENT). On this interrupt, we complete 4897 * all the CCBs that should have been aborted by the 4898 * target according to our message. 4899 */ 4900 static void sym_sir_task_recovery(hcb_p np, int num) 4901 { 4902 SYM_QUEHEAD *qp; 4903 ccb_p cp; 4904 tcb_p tp; 4905 int target=-1, lun=-1, task; 4906 int i, k; 4907 4908 switch(num) { 4909 /* 4910 * The SCRIPTS processor stopped before starting 4911 * the next command in order to allow us to perform 4912 * some task recovery. 4913 */ 4914 case SIR_SCRIPT_STOPPED: 4915 /* 4916 * Do we have any target to reset or unit to clear ? 4917 */ 4918 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 4919 tp = &np->target[i]; 4920 if (tp->to_reset || 4921 (tp->lun0p && tp->lun0p->to_clear)) { 4922 target = i; 4923 break; 4924 } 4925 if (!tp->lunmp) 4926 continue; 4927 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) { 4928 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) { 4929 target = i; 4930 break; 4931 } 4932 } 4933 if (target != -1) 4934 break; 4935 } 4936 4937 /* 4938 * If not, walk the busy queue for any 4939 * disconnected CCB to be aborted. 4940 */ 4941 if (target == -1) { 4942 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 4943 cp = sym_que_entry(qp,struct sym_ccb,link_ccbq); 4944 if (cp->host_status != HS_DISCONNECT) 4945 continue; 4946 if (cp->to_abort) { 4947 target = cp->target; 4948 break; 4949 } 4950 } 4951 } 4952 4953 /* 4954 * If some target is to be selected, 4955 * prepare and start the selection. 4956 */ 4957 if (target != -1) { 4958 tp = &np->target[target]; 4959 np->abrt_sel.sel_id = target; 4960 np->abrt_sel.sel_scntl3 = tp->head.wval; 4961 np->abrt_sel.sel_sxfer = tp->head.sval; 4962 OUTL(nc_dsa, np->hcb_ba); 4963 OUTL_DSP (SCRIPTB_BA (np, sel_for_abort)); 4964 return; 4965 } 4966 4967 /* 4968 * Now look for a CCB to abort that haven't started yet. 4969 * Btw, the SCRIPTS processor is still stopped, so 4970 * we are not in race. 4971 */ 4972 i = 0; 4973 cp = NULL; 4974 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 4975 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 4976 if (cp->host_status != HS_BUSY && 4977 cp->host_status != HS_NEGOTIATE) 4978 continue; 4979 if (!cp->to_abort) 4980 continue; 4981 #ifdef SYM_CONF_IARB_SUPPORT 4982 /* 4983 * If we are using IMMEDIATE ARBITRATION, we donnot 4984 * want to cancel the last queued CCB, since the 4985 * SCRIPTS may have anticipated the selection. 4986 */ 4987 if (cp == np->last_cp) { 4988 cp->to_abort = 0; 4989 continue; 4990 } 4991 #endif 4992 i = 1; /* Means we have found some */ 4993 break; 4994 } 4995 if (!i) { 4996 /* 4997 * We are done, so we donnot need 4998 * to synchronize with the SCRIPTS anylonger. 4999 * Remove the SEM flag from the ISTAT. 5000 */ 5001 np->istat_sem = 0; 5002 OUTB (nc_istat, SIGP); 5003 break; 5004 } 5005 /* 5006 * Compute index of next position in the start 5007 * queue the SCRIPTS intends to start and dequeue 5008 * all CCBs for that device that haven't been started. 5009 */ 5010 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 5011 i = sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 5012 5013 /* 5014 * Make sure at least our IO to abort has been dequeued. 5015 */ 5016 assert(i && sym_get_cam_status(cp->cam_ccb) == CAM_REQUEUE_REQ); 5017 5018 /* 5019 * Keep track in cam status of the reason of the abort. 5020 */ 5021 if (cp->to_abort == 2) 5022 sym_set_cam_status(cp->cam_ccb, CAM_CMD_TIMEOUT); 5023 else 5024 sym_set_cam_status(cp->cam_ccb, CAM_REQ_ABORTED); 5025 5026 /* 5027 * Complete with error everything that we have dequeued. 5028 */ 5029 sym_flush_comp_queue(np, 0); 5030 break; 5031 /* 5032 * The SCRIPTS processor has selected a target 5033 * we may have some manual recovery to perform for. 5034 */ 5035 case SIR_TARGET_SELECTED: 5036 target = (INB (nc_sdid) & 0xf); 5037 tp = &np->target[target]; 5038 5039 np->abrt_tbl.addr = cpu_to_scr(vtobus(np->abrt_msg)); 5040 5041 /* 5042 * If the target is to be reset, prepare a 5043 * M_RESET message and clear the to_reset flag 5044 * since we donnot expect this operation to fail. 5045 */ 5046 if (tp->to_reset) { 5047 np->abrt_msg[0] = M_RESET; 5048 np->abrt_tbl.size = 1; 5049 tp->to_reset = 0; 5050 break; 5051 } 5052 5053 /* 5054 * Otherwise, look for some logical unit to be cleared. 5055 */ 5056 if (tp->lun0p && tp->lun0p->to_clear) 5057 lun = 0; 5058 else if (tp->lunmp) { 5059 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) { 5060 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) { 5061 lun = k; 5062 break; 5063 } 5064 } 5065 } 5066 5067 /* 5068 * If a logical unit is to be cleared, prepare 5069 * an IDENTIFY(lun) + ABORT MESSAGE. 5070 */ 5071 if (lun != -1) { 5072 lcb_p lp = sym_lp(tp, lun); 5073 lp->to_clear = 0; /* We donnot expect to fail here */ 5074 np->abrt_msg[0] = M_IDENTIFY | lun; 5075 np->abrt_msg[1] = M_ABORT; 5076 np->abrt_tbl.size = 2; 5077 break; 5078 } 5079 5080 /* 5081 * Otherwise, look for some disconnected job to 5082 * abort for this target. 5083 */ 5084 i = 0; 5085 cp = NULL; 5086 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 5087 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 5088 if (cp->host_status != HS_DISCONNECT) 5089 continue; 5090 if (cp->target != target) 5091 continue; 5092 if (!cp->to_abort) 5093 continue; 5094 i = 1; /* Means we have some */ 5095 break; 5096 } 5097 5098 /* 5099 * If we have none, probably since the device has 5100 * completed the command before we won abitration, 5101 * send a M_ABORT message without IDENTIFY. 5102 * According to the specs, the device must just 5103 * disconnect the BUS and not abort any task. 5104 */ 5105 if (!i) { 5106 np->abrt_msg[0] = M_ABORT; 5107 np->abrt_tbl.size = 1; 5108 break; 5109 } 5110 5111 /* 5112 * We have some task to abort. 5113 * Set the IDENTIFY(lun) 5114 */ 5115 np->abrt_msg[0] = M_IDENTIFY | cp->lun; 5116 5117 /* 5118 * If we want to abort an untagged command, we 5119 * will send an IDENTIFY + M_ABORT. 5120 * Otherwise (tagged command), we will send 5121 * an IDENTIFY + task attributes + ABORT TAG. 5122 */ 5123 if (cp->tag == NO_TAG) { 5124 np->abrt_msg[1] = M_ABORT; 5125 np->abrt_tbl.size = 2; 5126 } 5127 else { 5128 np->abrt_msg[1] = cp->scsi_smsg[1]; 5129 np->abrt_msg[2] = cp->scsi_smsg[2]; 5130 np->abrt_msg[3] = M_ABORT_TAG; 5131 np->abrt_tbl.size = 4; 5132 } 5133 /* 5134 * Keep track of software timeout condition, since the 5135 * peripheral driver may not count retries on abort 5136 * conditions not due to timeout. 5137 */ 5138 if (cp->to_abort == 2) 5139 sym_set_cam_status(cp->cam_ccb, CAM_CMD_TIMEOUT); 5140 cp->to_abort = 0; /* We donnot expect to fail here */ 5141 break; 5142 5143 /* 5144 * The target has accepted our message and switched 5145 * to BUS FREE phase as we expected. 5146 */ 5147 case SIR_ABORT_SENT: 5148 target = (INB (nc_sdid) & 0xf); 5149 tp = &np->target[target]; 5150 5151 /* 5152 ** If we didn't abort anything, leave here. 5153 */ 5154 if (np->abrt_msg[0] == M_ABORT) 5155 break; 5156 5157 /* 5158 * If we sent a M_RESET, then a hardware reset has 5159 * been performed by the target. 5160 * - Reset everything to async 8 bit 5161 * - Tell ourself to negotiate next time :-) 5162 * - Prepare to clear all disconnected CCBs for 5163 * this target from our task list (lun=task=-1) 5164 */ 5165 lun = -1; 5166 task = -1; 5167 if (np->abrt_msg[0] == M_RESET) { 5168 tp->head.sval = 0; 5169 tp->head.wval = np->rv_scntl3; 5170 tp->head.uval = 0; 5171 tp->tinfo.current.period = 0; 5172 tp->tinfo.current.offset = 0; 5173 tp->tinfo.current.width = BUS_8_BIT; 5174 tp->tinfo.current.options = 0; 5175 } 5176 5177 /* 5178 * Otherwise, check for the LUN and TASK(s) 5179 * concerned by the cancellation. 5180 * If it is not ABORT_TAG then it is CLEAR_QUEUE 5181 * or an ABORT message :-) 5182 */ 5183 else { 5184 lun = np->abrt_msg[0] & 0x3f; 5185 if (np->abrt_msg[1] == M_ABORT_TAG) 5186 task = np->abrt_msg[2]; 5187 } 5188 5189 /* 5190 * Complete all the CCBs the device should have 5191 * aborted due to our 'kiss of death' message. 5192 */ 5193 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 5194 (void) sym_dequeue_from_squeue(np, i, target, lun, -1); 5195 (void) sym_clear_tasks(np, CAM_REQ_ABORTED, target, lun, task); 5196 sym_flush_comp_queue(np, 0); 5197 5198 /* 5199 * If we sent a BDR, make uper layer aware of that. 5200 */ 5201 if (np->abrt_msg[0] == M_RESET) 5202 xpt_async(AC_SENT_BDR, np->path, NULL); 5203 break; 5204 } 5205 5206 /* 5207 * Print to the log the message we intend to send. 5208 */ 5209 if (num == SIR_TARGET_SELECTED) { 5210 PRINT_TARGET(np, target); 5211 sym_printl_hex("control msgout:", np->abrt_msg, 5212 np->abrt_tbl.size); 5213 np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size); 5214 } 5215 5216 /* 5217 * Let the SCRIPTS processor continue. 5218 */ 5219 OUTONB_STD (); 5220 } 5221 5222 /* 5223 * Gerard's alchemy:) that deals with with the data 5224 * pointer for both MDP and the residual calculation. 5225 * 5226 * I didn't want to bloat the code by more than 200 5227 * lignes for the handling of both MDP and the residual. 5228 * This has been achieved by using a data pointer 5229 * representation consisting in an index in the data 5230 * array (dp_sg) and a negative offset (dp_ofs) that 5231 * have the following meaning: 5232 * 5233 * - dp_sg = SYM_CONF_MAX_SG 5234 * we are at the end of the data script. 5235 * - dp_sg < SYM_CONF_MAX_SG 5236 * dp_sg points to the next entry of the scatter array 5237 * we want to transfer. 5238 * - dp_ofs < 0 5239 * dp_ofs represents the residual of bytes of the 5240 * previous entry scatter entry we will send first. 5241 * - dp_ofs = 0 5242 * no residual to send first. 5243 * 5244 * The function sym_evaluate_dp() accepts an arbitray 5245 * offset (basically from the MDP message) and returns 5246 * the corresponding values of dp_sg and dp_ofs. 5247 */ 5248 static int sym_evaluate_dp(hcb_p np, ccb_p cp, u32 scr, int *ofs) 5249 { 5250 u32 dp_scr; 5251 int dp_ofs, dp_sg, dp_sgmin; 5252 int tmp; 5253 struct sym_pmc *pm; 5254 5255 /* 5256 * Compute the resulted data pointer in term of a script 5257 * address within some DATA script and a signed byte offset. 5258 */ 5259 dp_scr = scr; 5260 dp_ofs = *ofs; 5261 if (dp_scr == SCRIPTA_BA (np, pm0_data)) 5262 pm = &cp->phys.pm0; 5263 else if (dp_scr == SCRIPTA_BA (np, pm1_data)) 5264 pm = &cp->phys.pm1; 5265 else 5266 pm = NULL; 5267 5268 if (pm) { 5269 dp_scr = scr_to_cpu(pm->ret); 5270 dp_ofs -= scr_to_cpu(pm->sg.size); 5271 } 5272 5273 /* 5274 * If we are auto-sensing, then we are done. 5275 */ 5276 if (cp->host_flags & HF_SENSE) { 5277 *ofs = dp_ofs; 5278 return 0; 5279 } 5280 5281 /* 5282 * Deduce the index of the sg entry. 5283 * Keep track of the index of the first valid entry. 5284 * If result is dp_sg = SYM_CONF_MAX_SG, then we are at the 5285 * end of the data. 5286 */ 5287 tmp = scr_to_cpu(cp->phys.head.goalp); 5288 dp_sg = SYM_CONF_MAX_SG; 5289 if (dp_scr != tmp) 5290 dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4); 5291 dp_sgmin = SYM_CONF_MAX_SG - cp->segments; 5292 5293 /* 5294 * Move to the sg entry the data pointer belongs to. 5295 * 5296 * If we are inside the data area, we expect result to be: 5297 * 5298 * Either, 5299 * dp_ofs = 0 and dp_sg is the index of the sg entry 5300 * the data pointer belongs to (or the end of the data) 5301 * Or, 5302 * dp_ofs < 0 and dp_sg is the index of the sg entry 5303 * the data pointer belongs to + 1. 5304 */ 5305 if (dp_ofs < 0) { 5306 int n; 5307 while (dp_sg > dp_sgmin) { 5308 --dp_sg; 5309 tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5310 n = dp_ofs + (tmp & 0xffffff); 5311 if (n > 0) { 5312 ++dp_sg; 5313 break; 5314 } 5315 dp_ofs = n; 5316 } 5317 } 5318 else if (dp_ofs > 0) { 5319 while (dp_sg < SYM_CONF_MAX_SG) { 5320 tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5321 dp_ofs -= (tmp & 0xffffff); 5322 ++dp_sg; 5323 if (dp_ofs <= 0) 5324 break; 5325 } 5326 } 5327 5328 /* 5329 * Make sure the data pointer is inside the data area. 5330 * If not, return some error. 5331 */ 5332 if (dp_sg < dp_sgmin || (dp_sg == dp_sgmin && dp_ofs < 0)) 5333 goto out_err; 5334 else if (dp_sg > SYM_CONF_MAX_SG || 5335 (dp_sg == SYM_CONF_MAX_SG && dp_ofs > 0)) 5336 goto out_err; 5337 5338 /* 5339 * Save the extreme pointer if needed. 5340 */ 5341 if (dp_sg > cp->ext_sg || 5342 (dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) { 5343 cp->ext_sg = dp_sg; 5344 cp->ext_ofs = dp_ofs; 5345 } 5346 5347 /* 5348 * Return data. 5349 */ 5350 *ofs = dp_ofs; 5351 return dp_sg; 5352 5353 out_err: 5354 return -1; 5355 } 5356 5357 /* 5358 * chip handler for MODIFY DATA POINTER MESSAGE 5359 * 5360 * We also call this function on IGNORE WIDE RESIDUE 5361 * messages that do not match a SWIDE full condition. 5362 * Btw, we assume in that situation that such a message 5363 * is equivalent to a MODIFY DATA POINTER (offset=-1). 5364 */ 5365 static void sym_modify_dp(hcb_p np, ccb_p cp, int ofs) 5366 { 5367 int dp_ofs = ofs; 5368 u32 dp_scr = INL (nc_temp); 5369 u32 dp_ret; 5370 u32 tmp; 5371 u_char hflags; 5372 int dp_sg; 5373 struct sym_pmc *pm; 5374 5375 /* 5376 * Not supported for auto-sense. 5377 */ 5378 if (cp->host_flags & HF_SENSE) 5379 goto out_reject; 5380 5381 /* 5382 * Apply our alchemy:) (see comments in sym_evaluate_dp()), 5383 * to the resulted data pointer. 5384 */ 5385 dp_sg = sym_evaluate_dp(np, cp, dp_scr, &dp_ofs); 5386 if (dp_sg < 0) 5387 goto out_reject; 5388 5389 /* 5390 * And our alchemy:) allows to easily calculate the data 5391 * script address we want to return for the next data phase. 5392 */ 5393 dp_ret = cpu_to_scr(cp->phys.head.goalp); 5394 dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4); 5395 5396 /* 5397 * If offset / scatter entry is zero we donnot need 5398 * a context for the new current data pointer. 5399 */ 5400 if (dp_ofs == 0) { 5401 dp_scr = dp_ret; 5402 goto out_ok; 5403 } 5404 5405 /* 5406 * Get a context for the new current data pointer. 5407 */ 5408 hflags = INB (HF_PRT); 5409 5410 if (hflags & HF_DP_SAVED) 5411 hflags ^= HF_ACT_PM; 5412 5413 if (!(hflags & HF_ACT_PM)) { 5414 pm = &cp->phys.pm0; 5415 dp_scr = SCRIPTA_BA (np, pm0_data); 5416 } 5417 else { 5418 pm = &cp->phys.pm1; 5419 dp_scr = SCRIPTA_BA (np, pm1_data); 5420 } 5421 5422 hflags &= ~(HF_DP_SAVED); 5423 5424 OUTB (HF_PRT, hflags); 5425 5426 /* 5427 * Set up the new current data pointer. 5428 * ofs < 0 there, and for the next data phase, we 5429 * want to transfer part of the data of the sg entry 5430 * corresponding to index dp_sg-1 prior to returning 5431 * to the main data script. 5432 */ 5433 pm->ret = cpu_to_scr(dp_ret); 5434 tmp = scr_to_cpu(cp->phys.data[dp_sg-1].addr); 5435 tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size) + dp_ofs; 5436 pm->sg.addr = cpu_to_scr(tmp); 5437 pm->sg.size = cpu_to_scr(-dp_ofs); 5438 5439 out_ok: 5440 OUTL (nc_temp, dp_scr); 5441 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5442 return; 5443 5444 out_reject: 5445 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5446 } 5447 5448 /* 5449 * chip calculation of the data residual. 5450 * 5451 * As I used to say, the requirement of data residual 5452 * in SCSI is broken, useless and cannot be achieved 5453 * without huge complexity. 5454 * But most OSes and even the official CAM require it. 5455 * When stupidity happens to be so widely spread inside 5456 * a community, it gets hard to convince. 5457 * 5458 * Anyway, I don't care, since I am not going to use 5459 * any software that considers this data residual as 5460 * a relevant information. :) 5461 */ 5462 static int sym_compute_residual(hcb_p np, ccb_p cp) 5463 { 5464 int dp_sg, resid = 0; 5465 int dp_ofs = 0; 5466 5467 /* 5468 * Check for some data lost or just thrown away. 5469 * We are not required to be quite accurate in this 5470 * situation. Btw, if we are odd for output and the 5471 * device claims some more data, it may well happen 5472 * than our residual be zero. :-) 5473 */ 5474 if (cp->xerr_status & (XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) { 5475 if (cp->xerr_status & XE_EXTRA_DATA) 5476 resid -= cp->extra_bytes; 5477 if (cp->xerr_status & XE_SODL_UNRUN) 5478 ++resid; 5479 if (cp->xerr_status & XE_SWIDE_OVRUN) 5480 --resid; 5481 } 5482 5483 /* 5484 * If all data has been transferred, 5485 * there is no residual. 5486 */ 5487 if (cp->phys.head.lastp == cp->phys.head.goalp) 5488 return resid; 5489 5490 /* 5491 * If no data transfer occurs, or if the data 5492 * pointer is weird, return full residual. 5493 */ 5494 if (cp->startp == cp->phys.head.lastp || 5495 sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp), 5496 &dp_ofs) < 0) { 5497 return cp->data_len; 5498 } 5499 5500 /* 5501 * If we were auto-sensing, then we are done. 5502 */ 5503 if (cp->host_flags & HF_SENSE) { 5504 return -dp_ofs; 5505 } 5506 5507 /* 5508 * We are now full comfortable in the computation 5509 * of the data residual (2's complement). 5510 */ 5511 resid = -cp->ext_ofs; 5512 for (dp_sg = cp->ext_sg; dp_sg < SYM_CONF_MAX_SG; ++dp_sg) { 5513 u_int tmp = scr_to_cpu(cp->phys.data[dp_sg].size); 5514 resid += (tmp & 0xffffff); 5515 } 5516 5517 /* 5518 * Hopefully, the result is not too wrong. 5519 */ 5520 return resid; 5521 } 5522 5523 /* 5524 * Print out the content of a SCSI message. 5525 */ 5526 static int sym_show_msg (u_char * msg) 5527 { 5528 u_char i; 5529 printf ("%x",*msg); 5530 if (*msg==M_EXTENDED) { 5531 for (i=1;i<8;i++) { 5532 if (i-1>msg[1]) break; 5533 printf ("-%x",msg[i]); 5534 } 5535 return (i+1); 5536 } else if ((*msg & 0xf0) == 0x20) { 5537 printf ("-%x",msg[1]); 5538 return (2); 5539 } 5540 return (1); 5541 } 5542 5543 static void sym_print_msg (ccb_p cp, char *label, u_char *msg) 5544 { 5545 PRINT_ADDR(cp); 5546 if (label) 5547 printf ("%s: ", label); 5548 5549 (void) sym_show_msg (msg); 5550 printf (".\n"); 5551 } 5552 5553 /* 5554 * Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER. 5555 * 5556 * When we try to negotiate, we append the negotiation message 5557 * to the identify and (maybe) simple tag message. 5558 * The host status field is set to HS_NEGOTIATE to mark this 5559 * situation. 5560 * 5561 * If the target doesn't answer this message immediately 5562 * (as required by the standard), the SIR_NEGO_FAILED interrupt 5563 * will be raised eventually. 5564 * The handler removes the HS_NEGOTIATE status, and sets the 5565 * negotiated value to the default (async / nowide). 5566 * 5567 * If we receive a matching answer immediately, we check it 5568 * for validity, and set the values. 5569 * 5570 * If we receive a Reject message immediately, we assume the 5571 * negotiation has failed, and fall back to standard values. 5572 * 5573 * If we receive a negotiation message while not in HS_NEGOTIATE 5574 * state, it's a target initiated negotiation. We prepare a 5575 * (hopefully) valid answer, set our parameters, and send back 5576 * this answer to the target. 5577 * 5578 * If the target doesn't fetch the answer (no message out phase), 5579 * we assume the negotiation has failed, and fall back to default 5580 * settings (SIR_NEGO_PROTO interrupt). 5581 * 5582 * When we set the values, we adjust them in all ccbs belonging 5583 * to this target, in the controller's register, and in the "phys" 5584 * field of the controller's struct sym_hcb. 5585 */ 5586 5587 /* 5588 * chip handler for SYNCHRONOUS DATA TRANSFER REQUEST (SDTR) message. 5589 */ 5590 static void sym_sync_nego(hcb_p np, tcb_p tp, ccb_p cp) 5591 { 5592 u_char chg, ofs, per, fak, div; 5593 int req = 1; 5594 5595 /* 5596 * Synchronous request message received. 5597 */ 5598 if (DEBUG_FLAGS & DEBUG_NEGO) { 5599 sym_print_msg(cp, "sync msgin", np->msgin); 5600 } 5601 5602 /* 5603 * request or answer ? 5604 */ 5605 if (INB (HS_PRT) == HS_NEGOTIATE) { 5606 OUTB (HS_PRT, HS_BUSY); 5607 if (cp->nego_status && cp->nego_status != NS_SYNC) 5608 goto reject_it; 5609 req = 0; 5610 } 5611 5612 /* 5613 * get requested values. 5614 */ 5615 chg = 0; 5616 per = np->msgin[3]; 5617 ofs = np->msgin[4]; 5618 5619 /* 5620 * check values against our limits. 5621 */ 5622 if (ofs) { 5623 if (ofs > np->maxoffs) 5624 {chg = 1; ofs = np->maxoffs;} 5625 if (req) { 5626 if (ofs > tp->tinfo.user.offset) 5627 {chg = 1; ofs = tp->tinfo.user.offset;} 5628 } 5629 } 5630 5631 if (ofs) { 5632 if (per < np->minsync) 5633 {chg = 1; per = np->minsync;} 5634 if (req) { 5635 if (per < tp->tinfo.user.period) 5636 {chg = 1; per = tp->tinfo.user.period;} 5637 } 5638 } 5639 5640 div = fak = 0; 5641 if (ofs && sym_getsync(np, 0, per, &div, &fak) < 0) 5642 goto reject_it; 5643 5644 if (DEBUG_FLAGS & DEBUG_NEGO) { 5645 PRINT_ADDR(cp); 5646 printf ("sdtr: ofs=%d per=%d div=%d fak=%d chg=%d.\n", 5647 ofs, per, div, fak, chg); 5648 } 5649 5650 /* 5651 * This was an answer message 5652 */ 5653 if (req == 0) { 5654 if (chg) /* Answer wasn't acceptable. */ 5655 goto reject_it; 5656 sym_setsync (np, cp, ofs, per, div, fak); 5657 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5658 return; 5659 } 5660 5661 /* 5662 * It was a request. Set value and 5663 * prepare an answer message 5664 */ 5665 sym_setsync (np, cp, ofs, per, div, fak); 5666 5667 np->msgout[0] = M_EXTENDED; 5668 np->msgout[1] = 3; 5669 np->msgout[2] = M_X_SYNC_REQ; 5670 np->msgout[3] = per; 5671 np->msgout[4] = ofs; 5672 5673 cp->nego_status = NS_SYNC; 5674 5675 if (DEBUG_FLAGS & DEBUG_NEGO) { 5676 sym_print_msg(cp, "sync msgout", np->msgout); 5677 } 5678 5679 np->msgin [0] = M_NOOP; 5680 5681 OUTL_DSP (SCRIPTB_BA (np, sdtr_resp)); 5682 return; 5683 reject_it: 5684 sym_setsync (np, cp, 0, 0, 0, 0); 5685 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5686 } 5687 5688 /* 5689 * chip handler for PARALLEL PROTOCOL REQUEST (PPR) message. 5690 */ 5691 static void sym_ppr_nego(hcb_p np, tcb_p tp, ccb_p cp) 5692 { 5693 u_char chg, ofs, per, fak, dt, div, wide; 5694 int req = 1; 5695 5696 /* 5697 * Synchronous request message received. 5698 */ 5699 if (DEBUG_FLAGS & DEBUG_NEGO) { 5700 sym_print_msg(cp, "ppr msgin", np->msgin); 5701 } 5702 5703 /* 5704 * get requested values. 5705 */ 5706 chg = 0; 5707 per = np->msgin[3]; 5708 ofs = np->msgin[5]; 5709 wide = np->msgin[6]; 5710 dt = np->msgin[7] & PPR_OPT_DT; 5711 5712 /* 5713 * request or answer ? 5714 */ 5715 if (INB (HS_PRT) == HS_NEGOTIATE) { 5716 OUTB (HS_PRT, HS_BUSY); 5717 if (cp->nego_status && cp->nego_status != NS_PPR) 5718 goto reject_it; 5719 req = 0; 5720 } 5721 5722 /* 5723 * check values against our limits. 5724 */ 5725 if (wide > np->maxwide) 5726 {chg = 1; wide = np->maxwide;} 5727 if (!wide || !(np->features & FE_ULTRA3)) 5728 dt &= ~PPR_OPT_DT; 5729 if (req) { 5730 if (wide > tp->tinfo.user.width) 5731 {chg = 1; wide = tp->tinfo.user.width;} 5732 } 5733 5734 if (!(np->features & FE_U3EN)) /* Broken U3EN bit not supported */ 5735 dt &= ~PPR_OPT_DT; 5736 5737 if (dt != (np->msgin[7] & PPR_OPT_MASK)) chg = 1; 5738 5739 if (ofs) { 5740 if (dt) { 5741 if (ofs > np->maxoffs_dt) 5742 {chg = 1; ofs = np->maxoffs_dt;} 5743 } 5744 else if (ofs > np->maxoffs) 5745 {chg = 1; ofs = np->maxoffs;} 5746 if (req) { 5747 if (ofs > tp->tinfo.user.offset) 5748 {chg = 1; ofs = tp->tinfo.user.offset;} 5749 } 5750 } 5751 5752 if (ofs) { 5753 if (dt) { 5754 if (per < np->minsync_dt) 5755 {chg = 1; per = np->minsync_dt;} 5756 } 5757 else if (per < np->minsync) 5758 {chg = 1; per = np->minsync;} 5759 if (req) { 5760 if (per < tp->tinfo.user.period) 5761 {chg = 1; per = tp->tinfo.user.period;} 5762 } 5763 } 5764 5765 div = fak = 0; 5766 if (ofs && sym_getsync(np, dt, per, &div, &fak) < 0) 5767 goto reject_it; 5768 5769 if (DEBUG_FLAGS & DEBUG_NEGO) { 5770 PRINT_ADDR(cp); 5771 printf ("ppr: " 5772 "dt=%x ofs=%d per=%d wide=%d div=%d fak=%d chg=%d.\n", 5773 dt, ofs, per, wide, div, fak, chg); 5774 } 5775 5776 /* 5777 * It was an answer. 5778 */ 5779 if (req == 0) { 5780 if (chg) /* Answer wasn't acceptable */ 5781 goto reject_it; 5782 sym_setpprot (np, cp, dt, ofs, per, wide, div, fak); 5783 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5784 return; 5785 } 5786 5787 /* 5788 * It was a request. Set value and 5789 * prepare an answer message 5790 */ 5791 sym_setpprot (np, cp, dt, ofs, per, wide, div, fak); 5792 5793 np->msgout[0] = M_EXTENDED; 5794 np->msgout[1] = 6; 5795 np->msgout[2] = M_X_PPR_REQ; 5796 np->msgout[3] = per; 5797 np->msgout[4] = 0; 5798 np->msgout[5] = ofs; 5799 np->msgout[6] = wide; 5800 np->msgout[7] = dt; 5801 5802 cp->nego_status = NS_PPR; 5803 5804 if (DEBUG_FLAGS & DEBUG_NEGO) { 5805 sym_print_msg(cp, "ppr msgout", np->msgout); 5806 } 5807 5808 np->msgin [0] = M_NOOP; 5809 5810 OUTL_DSP (SCRIPTB_BA (np, ppr_resp)); 5811 return; 5812 reject_it: 5813 sym_setpprot (np, cp, 0, 0, 0, 0, 0, 0); 5814 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5815 /* 5816 * If it was a device response that should result in 5817 * ST, we may want to try a legacy negotiation later. 5818 */ 5819 if (!req && !dt) { 5820 tp->tinfo.goal.options = 0; 5821 tp->tinfo.goal.width = wide; 5822 tp->tinfo.goal.period = per; 5823 tp->tinfo.goal.offset = ofs; 5824 } 5825 } 5826 5827 /* 5828 * chip handler for WIDE DATA TRANSFER REQUEST (WDTR) message. 5829 */ 5830 static void sym_wide_nego(hcb_p np, tcb_p tp, ccb_p cp) 5831 { 5832 u_char chg, wide; 5833 int req = 1; 5834 5835 /* 5836 * Wide request message received. 5837 */ 5838 if (DEBUG_FLAGS & DEBUG_NEGO) { 5839 sym_print_msg(cp, "wide msgin", np->msgin); 5840 } 5841 5842 /* 5843 * Is it a request from the device? 5844 */ 5845 if (INB (HS_PRT) == HS_NEGOTIATE) { 5846 OUTB (HS_PRT, HS_BUSY); 5847 if (cp->nego_status && cp->nego_status != NS_WIDE) 5848 goto reject_it; 5849 req = 0; 5850 } 5851 5852 /* 5853 * get requested values. 5854 */ 5855 chg = 0; 5856 wide = np->msgin[3]; 5857 5858 /* 5859 * check values against driver limits. 5860 */ 5861 if (wide > np->maxwide) 5862 {chg = 1; wide = np->maxwide;} 5863 if (req) { 5864 if (wide > tp->tinfo.user.width) 5865 {chg = 1; wide = tp->tinfo.user.width;} 5866 } 5867 5868 if (DEBUG_FLAGS & DEBUG_NEGO) { 5869 PRINT_ADDR(cp); 5870 printf ("wdtr: wide=%d chg=%d.\n", wide, chg); 5871 } 5872 5873 /* 5874 * This was an answer message 5875 */ 5876 if (req == 0) { 5877 if (chg) /* Answer wasn't acceptable. */ 5878 goto reject_it; 5879 sym_setwide (np, cp, wide); 5880 5881 /* 5882 * Negotiate for SYNC immediately after WIDE response. 5883 * This allows to negotiate for both WIDE and SYNC on 5884 * a single SCSI command (Suggested by Justin Gibbs). 5885 */ 5886 if (tp->tinfo.goal.offset) { 5887 np->msgout[0] = M_EXTENDED; 5888 np->msgout[1] = 3; 5889 np->msgout[2] = M_X_SYNC_REQ; 5890 np->msgout[3] = tp->tinfo.goal.period; 5891 np->msgout[4] = tp->tinfo.goal.offset; 5892 5893 if (DEBUG_FLAGS & DEBUG_NEGO) { 5894 sym_print_msg(cp, "sync msgout", np->msgout); 5895 } 5896 5897 cp->nego_status = NS_SYNC; 5898 OUTB (HS_PRT, HS_NEGOTIATE); 5899 OUTL_DSP (SCRIPTB_BA (np, sdtr_resp)); 5900 return; 5901 } 5902 5903 OUTL_DSP (SCRIPTA_BA (np, clrack)); 5904 return; 5905 } 5906 5907 /* 5908 * It was a request, set value and 5909 * prepare an answer message 5910 */ 5911 sym_setwide (np, cp, wide); 5912 5913 np->msgout[0] = M_EXTENDED; 5914 np->msgout[1] = 2; 5915 np->msgout[2] = M_X_WIDE_REQ; 5916 np->msgout[3] = wide; 5917 5918 np->msgin [0] = M_NOOP; 5919 5920 cp->nego_status = NS_WIDE; 5921 5922 if (DEBUG_FLAGS & DEBUG_NEGO) { 5923 sym_print_msg(cp, "wide msgout", np->msgout); 5924 } 5925 5926 OUTL_DSP (SCRIPTB_BA (np, wdtr_resp)); 5927 return; 5928 reject_it: 5929 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 5930 } 5931 5932 /* 5933 * Reset SYNC or WIDE to default settings. 5934 * 5935 * Called when a negotiation does not succeed either 5936 * on rejection or on protocol error. 5937 * 5938 * If it was a PPR that made problems, we may want to 5939 * try a legacy negotiation later. 5940 */ 5941 static void sym_nego_default(hcb_p np, tcb_p tp, ccb_p cp) 5942 { 5943 /* 5944 * any error in negotiation: 5945 * fall back to default mode. 5946 */ 5947 switch (cp->nego_status) { 5948 case NS_PPR: 5949 #if 0 5950 sym_setpprot (np, cp, 0, 0, 0, 0, 0, 0); 5951 #else 5952 tp->tinfo.goal.options = 0; 5953 if (tp->tinfo.goal.period < np->minsync) 5954 tp->tinfo.goal.period = np->minsync; 5955 if (tp->tinfo.goal.offset > np->maxoffs) 5956 tp->tinfo.goal.offset = np->maxoffs; 5957 #endif 5958 break; 5959 case NS_SYNC: 5960 sym_setsync (np, cp, 0, 0, 0, 0); 5961 break; 5962 case NS_WIDE: 5963 sym_setwide (np, cp, 0); 5964 break; 5965 } 5966 np->msgin [0] = M_NOOP; 5967 np->msgout[0] = M_NOOP; 5968 cp->nego_status = 0; 5969 } 5970 5971 /* 5972 * chip handler for MESSAGE REJECT received in response to 5973 * a WIDE or SYNCHRONOUS negotiation. 5974 */ 5975 static void sym_nego_rejected(hcb_p np, tcb_p tp, ccb_p cp) 5976 { 5977 sym_nego_default(np, tp, cp); 5978 OUTB (HS_PRT, HS_BUSY); 5979 } 5980 5981 /* 5982 * chip exception handler for programmed interrupts. 5983 */ 5984 static void sym_int_sir (hcb_p np) 5985 { 5986 u_char num = INB (nc_dsps); 5987 u32 dsa = INL (nc_dsa); 5988 ccb_p cp = sym_ccb_from_dsa(np, dsa); 5989 u_char target = INB (nc_sdid) & 0x0f; 5990 tcb_p tp = &np->target[target]; 5991 int tmp; 5992 5993 SYM_LOCK_ASSERT(MA_OWNED); 5994 5995 if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num); 5996 5997 switch (num) { 5998 /* 5999 * Command has been completed with error condition 6000 * or has been auto-sensed. 6001 */ 6002 case SIR_COMPLETE_ERROR: 6003 if (!cp) 6004 goto out; 6005 sym_complete_error(np, cp); 6006 return; 6007 /* 6008 * The C code is currently trying to recover from something. 6009 * Typically, user want to abort some command. 6010 */ 6011 case SIR_SCRIPT_STOPPED: 6012 case SIR_TARGET_SELECTED: 6013 case SIR_ABORT_SENT: 6014 sym_sir_task_recovery(np, num); 6015 return; 6016 /* 6017 * The device didn't go to MSG OUT phase after having 6018 * been selected with ATN. We donnot want to handle 6019 * that. 6020 */ 6021 case SIR_SEL_ATN_NO_MSG_OUT: 6022 printf ("%s:%d: No MSG OUT phase after selection with ATN.\n", 6023 sym_name (np), target); 6024 goto out_stuck; 6025 /* 6026 * The device didn't switch to MSG IN phase after 6027 * having reseleted the initiator. 6028 */ 6029 case SIR_RESEL_NO_MSG_IN: 6030 printf ("%s:%d: No MSG IN phase after reselection.\n", 6031 sym_name (np), target); 6032 goto out_stuck; 6033 /* 6034 * After reselection, the device sent a message that wasn't 6035 * an IDENTIFY. 6036 */ 6037 case SIR_RESEL_NO_IDENTIFY: 6038 printf ("%s:%d: No IDENTIFY after reselection.\n", 6039 sym_name (np), target); 6040 goto out_stuck; 6041 /* 6042 * The device reselected a LUN we donnot know about. 6043 */ 6044 case SIR_RESEL_BAD_LUN: 6045 np->msgout[0] = M_RESET; 6046 goto out; 6047 /* 6048 * The device reselected for an untagged nexus and we 6049 * haven't any. 6050 */ 6051 case SIR_RESEL_BAD_I_T_L: 6052 np->msgout[0] = M_ABORT; 6053 goto out; 6054 /* 6055 * The device reselected for a tagged nexus that we donnot 6056 * have. 6057 */ 6058 case SIR_RESEL_BAD_I_T_L_Q: 6059 np->msgout[0] = M_ABORT_TAG; 6060 goto out; 6061 /* 6062 * The SCRIPTS let us know that the device has grabbed 6063 * our message and will abort the job. 6064 */ 6065 case SIR_RESEL_ABORTED: 6066 np->lastmsg = np->msgout[0]; 6067 np->msgout[0] = M_NOOP; 6068 printf ("%s:%d: message %x sent on bad reselection.\n", 6069 sym_name (np), target, np->lastmsg); 6070 goto out; 6071 /* 6072 * The SCRIPTS let us know that a message has been 6073 * successfully sent to the device. 6074 */ 6075 case SIR_MSG_OUT_DONE: 6076 np->lastmsg = np->msgout[0]; 6077 np->msgout[0] = M_NOOP; 6078 /* Should we really care of that */ 6079 if (np->lastmsg == M_PARITY || np->lastmsg == M_ID_ERROR) { 6080 if (cp) { 6081 cp->xerr_status &= ~XE_PARITY_ERR; 6082 if (!cp->xerr_status) 6083 OUTOFFB (HF_PRT, HF_EXT_ERR); 6084 } 6085 } 6086 goto out; 6087 /* 6088 * The device didn't send a GOOD SCSI status. 6089 * We may have some work to do prior to allow 6090 * the SCRIPTS processor to continue. 6091 */ 6092 case SIR_BAD_SCSI_STATUS: 6093 if (!cp) 6094 goto out; 6095 sym_sir_bad_scsi_status(np, cp); 6096 return; 6097 /* 6098 * We are asked by the SCRIPTS to prepare a 6099 * REJECT message. 6100 */ 6101 case SIR_REJECT_TO_SEND: 6102 sym_print_msg(cp, "M_REJECT to send for ", np->msgin); 6103 np->msgout[0] = M_REJECT; 6104 goto out; 6105 /* 6106 * We have been ODD at the end of a DATA IN 6107 * transfer and the device didn't send a 6108 * IGNORE WIDE RESIDUE message. 6109 * It is a data overrun condition. 6110 */ 6111 case SIR_SWIDE_OVERRUN: 6112 if (cp) { 6113 OUTONB (HF_PRT, HF_EXT_ERR); 6114 cp->xerr_status |= XE_SWIDE_OVRUN; 6115 } 6116 goto out; 6117 /* 6118 * We have been ODD at the end of a DATA OUT 6119 * transfer. 6120 * It is a data underrun condition. 6121 */ 6122 case SIR_SODL_UNDERRUN: 6123 if (cp) { 6124 OUTONB (HF_PRT, HF_EXT_ERR); 6125 cp->xerr_status |= XE_SODL_UNRUN; 6126 } 6127 goto out; 6128 /* 6129 * The device wants us to transfer more data than 6130 * expected or in the wrong direction. 6131 * The number of extra bytes is in scratcha. 6132 * It is a data overrun condition. 6133 */ 6134 case SIR_DATA_OVERRUN: 6135 if (cp) { 6136 OUTONB (HF_PRT, HF_EXT_ERR); 6137 cp->xerr_status |= XE_EXTRA_DATA; 6138 cp->extra_bytes += INL (nc_scratcha); 6139 } 6140 goto out; 6141 /* 6142 * The device switched to an illegal phase (4/5). 6143 */ 6144 case SIR_BAD_PHASE: 6145 if (cp) { 6146 OUTONB (HF_PRT, HF_EXT_ERR); 6147 cp->xerr_status |= XE_BAD_PHASE; 6148 } 6149 goto out; 6150 /* 6151 * We received a message. 6152 */ 6153 case SIR_MSG_RECEIVED: 6154 if (!cp) 6155 goto out_stuck; 6156 switch (np->msgin [0]) { 6157 /* 6158 * We received an extended message. 6159 * We handle MODIFY DATA POINTER, SDTR, WDTR 6160 * and reject all other extended messages. 6161 */ 6162 case M_EXTENDED: 6163 switch (np->msgin [2]) { 6164 case M_X_MODIFY_DP: 6165 if (DEBUG_FLAGS & DEBUG_POINTER) 6166 sym_print_msg(cp,"modify DP",np->msgin); 6167 tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) + 6168 (np->msgin[5]<<8) + (np->msgin[6]); 6169 sym_modify_dp(np, cp, tmp); 6170 return; 6171 case M_X_SYNC_REQ: 6172 sym_sync_nego(np, tp, cp); 6173 return; 6174 case M_X_PPR_REQ: 6175 sym_ppr_nego(np, tp, cp); 6176 return; 6177 case M_X_WIDE_REQ: 6178 sym_wide_nego(np, tp, cp); 6179 return; 6180 default: 6181 goto out_reject; 6182 } 6183 break; 6184 /* 6185 * We received a 1/2 byte message not handled from SCRIPTS. 6186 * We are only expecting MESSAGE REJECT and IGNORE WIDE 6187 * RESIDUE messages that haven't been anticipated by 6188 * SCRIPTS on SWIDE full condition. Unanticipated IGNORE 6189 * WIDE RESIDUE messages are aliased as MODIFY DP (-1). 6190 */ 6191 case M_IGN_RESIDUE: 6192 if (DEBUG_FLAGS & DEBUG_POINTER) 6193 sym_print_msg(cp,"ign wide residue", np->msgin); 6194 sym_modify_dp(np, cp, -1); 6195 return; 6196 case M_REJECT: 6197 if (INB (HS_PRT) == HS_NEGOTIATE) 6198 sym_nego_rejected(np, tp, cp); 6199 else { 6200 PRINT_ADDR(cp); 6201 printf ("M_REJECT received (%x:%x).\n", 6202 scr_to_cpu(np->lastmsg), np->msgout[0]); 6203 } 6204 goto out_clrack; 6205 break; 6206 default: 6207 goto out_reject; 6208 } 6209 break; 6210 /* 6211 * We received an unknown message. 6212 * Ignore all MSG IN phases and reject it. 6213 */ 6214 case SIR_MSG_WEIRD: 6215 sym_print_msg(cp, "WEIRD message received", np->msgin); 6216 OUTL_DSP (SCRIPTB_BA (np, msg_weird)); 6217 return; 6218 /* 6219 * Negotiation failed. 6220 * Target does not send us the reply. 6221 * Remove the HS_NEGOTIATE status. 6222 */ 6223 case SIR_NEGO_FAILED: 6224 OUTB (HS_PRT, HS_BUSY); 6225 /* 6226 * Negotiation failed. 6227 * Target does not want answer message. 6228 */ 6229 case SIR_NEGO_PROTO: 6230 if (!cp) 6231 goto out; 6232 sym_nego_default(np, tp, cp); 6233 goto out; 6234 } 6235 6236 out: 6237 OUTONB_STD (); 6238 return; 6239 out_reject: 6240 OUTL_DSP (SCRIPTB_BA (np, msg_bad)); 6241 return; 6242 out_clrack: 6243 OUTL_DSP (SCRIPTA_BA (np, clrack)); 6244 return; 6245 out_stuck: 6246 return; 6247 } 6248 6249 /* 6250 * Acquire a control block 6251 */ 6252 static ccb_p sym_get_ccb (hcb_p np, u_char tn, u_char ln, u_char tag_order) 6253 { 6254 tcb_p tp = &np->target[tn]; 6255 lcb_p lp = sym_lp(tp, ln); 6256 u_short tag = NO_TAG; 6257 SYM_QUEHEAD *qp; 6258 ccb_p cp = (ccb_p) NULL; 6259 6260 /* 6261 * Look for a free CCB 6262 */ 6263 if (sym_que_empty(&np->free_ccbq)) 6264 goto out; 6265 qp = sym_remque_head(&np->free_ccbq); 6266 if (!qp) 6267 goto out; 6268 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 6269 6270 /* 6271 * If the LCB is not yet available and the LUN 6272 * has been probed ok, try to allocate the LCB. 6273 */ 6274 if (!lp && sym_is_bit(tp->lun_map, ln)) { 6275 lp = sym_alloc_lcb(np, tn, ln); 6276 if (!lp) 6277 goto out_free; 6278 } 6279 6280 /* 6281 * If the LCB is not available here, then the 6282 * logical unit is not yet discovered. For those 6283 * ones only accept 1 SCSI IO per logical unit, 6284 * since we cannot allow disconnections. 6285 */ 6286 if (!lp) { 6287 if (!sym_is_bit(tp->busy0_map, ln)) 6288 sym_set_bit(tp->busy0_map, ln); 6289 else 6290 goto out_free; 6291 } else { 6292 /* 6293 * If we have been asked for a tagged command, refuse 6294 * to overlap with an existing untagged one. 6295 */ 6296 if (tag_order) { 6297 if (lp->busy_itl != 0) 6298 goto out_free; 6299 /* 6300 * Allocate resources for tags if not yet. 6301 */ 6302 if (!lp->cb_tags) { 6303 sym_alloc_lcb_tags(np, tn, ln); 6304 if (!lp->cb_tags) 6305 goto out_free; 6306 } 6307 /* 6308 * Get a tag for this SCSI IO and set up 6309 * the CCB bus address for reselection, 6310 * and count it for this LUN. 6311 * Toggle reselect path to tagged. 6312 */ 6313 if (lp->busy_itlq < SYM_CONF_MAX_TASK) { 6314 tag = lp->cb_tags[lp->ia_tag]; 6315 if (++lp->ia_tag == SYM_CONF_MAX_TASK) 6316 lp->ia_tag = 0; 6317 lp->itlq_tbl[tag] = cpu_to_scr(cp->ccb_ba); 6318 ++lp->busy_itlq; 6319 lp->head.resel_sa = 6320 cpu_to_scr(SCRIPTA_BA (np, resel_tag)); 6321 } 6322 else 6323 goto out_free; 6324 } 6325 /* 6326 * This command will not be tagged. 6327 * If we already have either a tagged or untagged 6328 * one, refuse to overlap this untagged one. 6329 */ 6330 else { 6331 if (lp->busy_itlq != 0 || lp->busy_itl != 0) 6332 goto out_free; 6333 /* 6334 * Count this nexus for this LUN. 6335 * Set up the CCB bus address for reselection. 6336 * Toggle reselect path to untagged. 6337 */ 6338 lp->busy_itl = 1; 6339 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba); 6340 lp->head.resel_sa = 6341 cpu_to_scr(SCRIPTA_BA (np, resel_no_tag)); 6342 } 6343 } 6344 /* 6345 * Put the CCB into the busy queue. 6346 */ 6347 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq); 6348 6349 /* 6350 * Remember all informations needed to free this CCB. 6351 */ 6352 cp->to_abort = 0; 6353 cp->tag = tag; 6354 cp->target = tn; 6355 cp->lun = ln; 6356 6357 if (DEBUG_FLAGS & DEBUG_TAGS) { 6358 PRINT_LUN(np, tn, ln); 6359 printf ("ccb @%p using tag %d.\n", cp, tag); 6360 } 6361 6362 out: 6363 return cp; 6364 out_free: 6365 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6366 return NULL; 6367 } 6368 6369 /* 6370 * Release one control block 6371 */ 6372 static void sym_free_ccb(hcb_p np, ccb_p cp) 6373 { 6374 tcb_p tp = &np->target[cp->target]; 6375 lcb_p lp = sym_lp(tp, cp->lun); 6376 6377 if (DEBUG_FLAGS & DEBUG_TAGS) { 6378 PRINT_LUN(np, cp->target, cp->lun); 6379 printf ("ccb @%p freeing tag %d.\n", cp, cp->tag); 6380 } 6381 6382 /* 6383 * If LCB available, 6384 */ 6385 if (lp) { 6386 /* 6387 * If tagged, release the tag, set the reselect path. 6388 */ 6389 if (cp->tag != NO_TAG) { 6390 /* 6391 * Free the tag value. 6392 */ 6393 lp->cb_tags[lp->if_tag] = cp->tag; 6394 if (++lp->if_tag == SYM_CONF_MAX_TASK) 6395 lp->if_tag = 0; 6396 /* 6397 * Make the reselect path invalid, 6398 * and uncount this CCB. 6399 */ 6400 lp->itlq_tbl[cp->tag] = cpu_to_scr(np->bad_itlq_ba); 6401 --lp->busy_itlq; 6402 } else { /* Untagged */ 6403 /* 6404 * Make the reselect path invalid, 6405 * and uncount this CCB. 6406 */ 6407 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba); 6408 lp->busy_itl = 0; 6409 } 6410 /* 6411 * If no JOB active, make the LUN reselect path invalid. 6412 */ 6413 if (lp->busy_itlq == 0 && lp->busy_itl == 0) 6414 lp->head.resel_sa = 6415 cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 6416 } 6417 /* 6418 * Otherwise, we only accept 1 IO per LUN. 6419 * Clear the bit that keeps track of this IO. 6420 */ 6421 else 6422 sym_clr_bit(tp->busy0_map, cp->lun); 6423 6424 /* 6425 * We donnot queue more than 1 ccb per target 6426 * with negotiation at any time. If this ccb was 6427 * used for negotiation, clear this info in the tcb. 6428 */ 6429 if (cp == tp->nego_cp) 6430 tp->nego_cp = NULL; 6431 6432 #ifdef SYM_CONF_IARB_SUPPORT 6433 /* 6434 * If we just complete the last queued CCB, 6435 * clear this info that is no longer relevant. 6436 */ 6437 if (cp == np->last_cp) 6438 np->last_cp = NULL; 6439 #endif 6440 6441 /* 6442 * Unmap user data from DMA map if needed. 6443 */ 6444 if (cp->dmamapped) { 6445 bus_dmamap_unload(np->data_dmat, cp->dmamap); 6446 cp->dmamapped = 0; 6447 } 6448 6449 /* 6450 * Make this CCB available. 6451 */ 6452 cp->cam_ccb = NULL; 6453 cp->host_status = HS_IDLE; 6454 sym_remque(&cp->link_ccbq); 6455 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6456 } 6457 6458 /* 6459 * Allocate a CCB from memory and initialize its fixed part. 6460 */ 6461 static ccb_p sym_alloc_ccb(hcb_p np) 6462 { 6463 ccb_p cp = NULL; 6464 int hcode; 6465 6466 SYM_LOCK_ASSERT(MA_NOTOWNED); 6467 6468 /* 6469 * Prevent from allocating more CCBs than we can 6470 * queue to the controller. 6471 */ 6472 if (np->actccbs >= SYM_CONF_MAX_START) 6473 return NULL; 6474 6475 /* 6476 * Allocate memory for this CCB. 6477 */ 6478 cp = sym_calloc_dma(sizeof(struct sym_ccb), "CCB"); 6479 if (!cp) 6480 return NULL; 6481 6482 /* 6483 * Allocate a bounce buffer for sense data. 6484 */ 6485 cp->sns_bbuf = sym_calloc_dma(SYM_SNS_BBUF_LEN, "SNS_BBUF"); 6486 if (!cp->sns_bbuf) 6487 goto out_free; 6488 6489 /* 6490 * Allocate a map for the DMA of user data. 6491 */ 6492 if (bus_dmamap_create(np->data_dmat, 0, &cp->dmamap)) 6493 goto out_free; 6494 /* 6495 * Count it. 6496 */ 6497 np->actccbs++; 6498 6499 /* 6500 * Initialize the callout. 6501 */ 6502 callout_init(&cp->ch, 1); 6503 6504 /* 6505 * Compute the bus address of this ccb. 6506 */ 6507 cp->ccb_ba = vtobus(cp); 6508 6509 /* 6510 * Insert this ccb into the hashed list. 6511 */ 6512 hcode = CCB_HASH_CODE(cp->ccb_ba); 6513 cp->link_ccbh = np->ccbh[hcode]; 6514 np->ccbh[hcode] = cp; 6515 6516 /* 6517 * Initialize the start and restart actions. 6518 */ 6519 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 6520 cp->phys.head.go.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 6521 6522 /* 6523 * Initilialyze some other fields. 6524 */ 6525 cp->phys.smsg_ext.addr = cpu_to_scr(HCB_BA(np, msgin[2])); 6526 6527 /* 6528 * Chain into free ccb queue. 6529 */ 6530 sym_insque_head(&cp->link_ccbq, &np->free_ccbq); 6531 6532 return cp; 6533 out_free: 6534 if (cp->sns_bbuf) 6535 sym_mfree_dma(cp->sns_bbuf, SYM_SNS_BBUF_LEN, "SNS_BBUF"); 6536 sym_mfree_dma(cp, sizeof(*cp), "CCB"); 6537 return NULL; 6538 } 6539 6540 /* 6541 * Look up a CCB from a DSA value. 6542 */ 6543 static ccb_p sym_ccb_from_dsa(hcb_p np, u32 dsa) 6544 { 6545 int hcode; 6546 ccb_p cp; 6547 6548 hcode = CCB_HASH_CODE(dsa); 6549 cp = np->ccbh[hcode]; 6550 while (cp) { 6551 if (cp->ccb_ba == dsa) 6552 break; 6553 cp = cp->link_ccbh; 6554 } 6555 6556 return cp; 6557 } 6558 6559 /* 6560 * Lun control block allocation and initialization. 6561 */ 6562 static lcb_p sym_alloc_lcb (hcb_p np, u_char tn, u_char ln) 6563 { 6564 tcb_p tp = &np->target[tn]; 6565 lcb_p lp = sym_lp(tp, ln); 6566 6567 /* 6568 * Already done, just return. 6569 */ 6570 if (lp) 6571 return lp; 6572 /* 6573 * Check against some race. 6574 */ 6575 assert(!sym_is_bit(tp->busy0_map, ln)); 6576 6577 /* 6578 * Allocate the LCB bus address array. 6579 * Compute the bus address of this table. 6580 */ 6581 if (ln && !tp->luntbl) { 6582 int i; 6583 6584 tp->luntbl = sym_calloc_dma(256, "LUNTBL"); 6585 if (!tp->luntbl) 6586 goto fail; 6587 for (i = 0 ; i < 64 ; i++) 6588 tp->luntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa)); 6589 tp->head.luntbl_sa = cpu_to_scr(vtobus(tp->luntbl)); 6590 } 6591 6592 /* 6593 * Allocate the table of pointers for LUN(s) > 0, if needed. 6594 */ 6595 if (ln && !tp->lunmp) { 6596 tp->lunmp = sym_calloc(SYM_CONF_MAX_LUN * sizeof(lcb_p), 6597 "LUNMP"); 6598 if (!tp->lunmp) 6599 goto fail; 6600 } 6601 6602 /* 6603 * Allocate the lcb. 6604 * Make it available to the chip. 6605 */ 6606 lp = sym_calloc_dma(sizeof(struct sym_lcb), "LCB"); 6607 if (!lp) 6608 goto fail; 6609 if (ln) { 6610 tp->lunmp[ln] = lp; 6611 tp->luntbl[ln] = cpu_to_scr(vtobus(lp)); 6612 } 6613 else { 6614 tp->lun0p = lp; 6615 tp->head.lun0_sa = cpu_to_scr(vtobus(lp)); 6616 } 6617 6618 /* 6619 * Let the itl task point to error handling. 6620 */ 6621 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba); 6622 6623 /* 6624 * Set the reselect pattern to our default. :) 6625 */ 6626 lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 6627 6628 /* 6629 * Set user capabilities. 6630 */ 6631 lp->user_flags = tp->usrflags & (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); 6632 6633 fail: 6634 return lp; 6635 } 6636 6637 /* 6638 * Allocate LCB resources for tagged command queuing. 6639 */ 6640 static void sym_alloc_lcb_tags (hcb_p np, u_char tn, u_char ln) 6641 { 6642 tcb_p tp = &np->target[tn]; 6643 lcb_p lp = sym_lp(tp, ln); 6644 int i; 6645 6646 /* 6647 * If LCB not available, try to allocate it. 6648 */ 6649 if (!lp && !(lp = sym_alloc_lcb(np, tn, ln))) 6650 return; 6651 6652 /* 6653 * Allocate the task table and and the tag allocation 6654 * circular buffer. We want both or none. 6655 */ 6656 lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); 6657 if (!lp->itlq_tbl) 6658 return; 6659 lp->cb_tags = sym_calloc(SYM_CONF_MAX_TASK, "CB_TAGS"); 6660 if (!lp->cb_tags) { 6661 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); 6662 lp->itlq_tbl = NULL; 6663 return; 6664 } 6665 6666 /* 6667 * Initialize the task table with invalid entries. 6668 */ 6669 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++) 6670 lp->itlq_tbl[i] = cpu_to_scr(np->notask_ba); 6671 6672 /* 6673 * Fill up the tag buffer with tag numbers. 6674 */ 6675 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++) 6676 lp->cb_tags[i] = i; 6677 6678 /* 6679 * Make the task table available to SCRIPTS, 6680 * And accept tagged commands now. 6681 */ 6682 lp->head.itlq_tbl_sa = cpu_to_scr(vtobus(lp->itlq_tbl)); 6683 } 6684 6685 /* 6686 * Test the pci bus snoop logic :-( 6687 * 6688 * Has to be called with interrupts disabled. 6689 */ 6690 #ifndef SYM_CONF_IOMAPPED 6691 static int sym_regtest (hcb_p np) 6692 { 6693 register volatile u32 data; 6694 /* 6695 * chip registers may NOT be cached. 6696 * write 0xffffffff to a read only register area, 6697 * and try to read it back. 6698 */ 6699 data = 0xffffffff; 6700 OUTL_OFF(offsetof(struct sym_reg, nc_dstat), data); 6701 data = INL_OFF(offsetof(struct sym_reg, nc_dstat)); 6702 #if 1 6703 if (data == 0xffffffff) { 6704 #else 6705 if ((data & 0xe2f0fffd) != 0x02000080) { 6706 #endif 6707 printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", 6708 (unsigned) data); 6709 return (0x10); 6710 } 6711 return (0); 6712 } 6713 #endif 6714 6715 static int sym_snooptest (hcb_p np) 6716 { 6717 u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat; 6718 int i, err=0; 6719 #ifndef SYM_CONF_IOMAPPED 6720 err |= sym_regtest (np); 6721 if (err) return (err); 6722 #endif 6723 restart_test: 6724 /* 6725 * Enable Master Parity Checking as we intend 6726 * to enable it for normal operations. 6727 */ 6728 OUTB (nc_ctest4, (np->rv_ctest4 & MPEE)); 6729 /* 6730 * init 6731 */ 6732 pc = SCRIPTB0_BA (np, snooptest); 6733 host_wr = 1; 6734 sym_wr = 2; 6735 /* 6736 * Set memory and register. 6737 */ 6738 np->cache = cpu_to_scr(host_wr); 6739 OUTL (nc_temp, sym_wr); 6740 /* 6741 * Start script (exchange values) 6742 */ 6743 OUTL (nc_dsa, np->hcb_ba); 6744 OUTL_DSP (pc); 6745 /* 6746 * Wait 'til done (with timeout) 6747 */ 6748 for (i=0; i<SYM_SNOOP_TIMEOUT; i++) 6749 if (INB(nc_istat) & (INTF|SIP|DIP)) 6750 break; 6751 if (i>=SYM_SNOOP_TIMEOUT) { 6752 printf ("CACHE TEST FAILED: timeout.\n"); 6753 return (0x20); 6754 } 6755 /* 6756 * Check for fatal DMA errors. 6757 */ 6758 dstat = INB (nc_dstat); 6759 #if 1 /* Band aiding for broken hardwares that fail PCI parity */ 6760 if ((dstat & MDPE) && (np->rv_ctest4 & MPEE)) { 6761 printf ("%s: PCI DATA PARITY ERROR DETECTED - " 6762 "DISABLING MASTER DATA PARITY CHECKING.\n", 6763 sym_name(np)); 6764 np->rv_ctest4 &= ~MPEE; 6765 goto restart_test; 6766 } 6767 #endif 6768 if (dstat & (MDPE|BF|IID)) { 6769 printf ("CACHE TEST FAILED: DMA error (dstat=0x%02x).", dstat); 6770 return (0x80); 6771 } 6772 /* 6773 * Save termination position. 6774 */ 6775 pc = INL (nc_dsp); 6776 /* 6777 * Read memory and register. 6778 */ 6779 host_rd = scr_to_cpu(np->cache); 6780 sym_rd = INL (nc_scratcha); 6781 sym_bk = INL (nc_temp); 6782 6783 /* 6784 * Check termination position. 6785 */ 6786 if (pc != SCRIPTB0_BA (np, snoopend)+8) { 6787 printf ("CACHE TEST FAILED: script execution failed.\n"); 6788 printf ("start=%08lx, pc=%08lx, end=%08lx\n", 6789 (u_long) SCRIPTB0_BA (np, snooptest), (u_long) pc, 6790 (u_long) SCRIPTB0_BA (np, snoopend) +8); 6791 return (0x40); 6792 } 6793 /* 6794 * Show results. 6795 */ 6796 if (host_wr != sym_rd) { 6797 printf ("CACHE TEST FAILED: host wrote %d, chip read %d.\n", 6798 (int) host_wr, (int) sym_rd); 6799 err |= 1; 6800 } 6801 if (host_rd != sym_wr) { 6802 printf ("CACHE TEST FAILED: chip wrote %d, host read %d.\n", 6803 (int) sym_wr, (int) host_rd); 6804 err |= 2; 6805 } 6806 if (sym_bk != sym_wr) { 6807 printf ("CACHE TEST FAILED: chip wrote %d, read back %d.\n", 6808 (int) sym_wr, (int) sym_bk); 6809 err |= 4; 6810 } 6811 6812 return (err); 6813 } 6814 6815 /* 6816 * Determine the chip's clock frequency. 6817 * 6818 * This is essential for the negotiation of the synchronous 6819 * transfer rate. 6820 * 6821 * Note: we have to return the correct value. 6822 * THERE IS NO SAFE DEFAULT VALUE. 6823 * 6824 * Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. 6825 * 53C860 and 53C875 rev. 1 support fast20 transfers but 6826 * do not have a clock doubler and so are provided with a 6827 * 80 MHz clock. All other fast20 boards incorporate a doubler 6828 * and so should be delivered with a 40 MHz clock. 6829 * The recent fast40 chips (895/896/895A/1010) use a 40 Mhz base 6830 * clock and provide a clock quadrupler (160 Mhz). 6831 */ 6832 6833 /* 6834 * Select SCSI clock frequency 6835 */ 6836 static void sym_selectclock(hcb_p np, u_char scntl3) 6837 { 6838 /* 6839 * If multiplier not present or not selected, leave here. 6840 */ 6841 if (np->multiplier <= 1) { 6842 OUTB(nc_scntl3, scntl3); 6843 return; 6844 } 6845 6846 if (sym_verbose >= 2) 6847 printf ("%s: enabling clock multiplier\n", sym_name(np)); 6848 6849 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ 6850 /* 6851 * Wait for the LCKFRQ bit to be set if supported by the chip. 6852 * Otherwise wait 20 micro-seconds. 6853 */ 6854 if (np->features & FE_LCKFRQ) { 6855 int i = 20; 6856 while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) 6857 UDELAY (20); 6858 if (!i) 6859 printf("%s: the chip cannot lock the frequency\n", 6860 sym_name(np)); 6861 } else 6862 UDELAY (20); 6863 OUTB(nc_stest3, HSC); /* Halt the scsi clock */ 6864 OUTB(nc_scntl3, scntl3); 6865 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ 6866 OUTB(nc_stest3, 0x00); /* Restart scsi clock */ 6867 } 6868 6869 /* 6870 * calculate SCSI clock frequency (in KHz) 6871 */ 6872 static unsigned getfreq (hcb_p np, int gen) 6873 { 6874 unsigned int ms = 0; 6875 unsigned int f; 6876 6877 /* 6878 * Measure GEN timer delay in order 6879 * to calculate SCSI clock frequency 6880 * 6881 * This code will never execute too 6882 * many loop iterations (if DELAY is 6883 * reasonably correct). It could get 6884 * too low a delay (too high a freq.) 6885 * if the CPU is slow executing the 6886 * loop for some reason (an NMI, for 6887 * example). For this reason we will 6888 * if multiple measurements are to be 6889 * performed trust the higher delay 6890 * (lower frequency returned). 6891 */ 6892 OUTW (nc_sien , 0); /* mask all scsi interrupts */ 6893 (void) INW (nc_sist); /* clear pending scsi interrupt */ 6894 OUTB (nc_dien , 0); /* mask all dma interrupts */ 6895 (void) INW (nc_sist); /* another one, just to be sure :) */ 6896 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ 6897 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6898 OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */ 6899 while (!(INW(nc_sist) & GEN) && ms++ < 100000) 6900 UDELAY (1000); /* count ms */ 6901 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6902 /* 6903 * set prescaler to divide by whatever 0 means 6904 * 0 ought to choose divide by 2, but appears 6905 * to set divide by 3.5 mode in my 53c810 ... 6906 */ 6907 OUTB (nc_scntl3, 0); 6908 6909 /* 6910 * adjust for prescaler, and convert into KHz 6911 */ 6912 f = ms ? ((1 << gen) * 4340) / ms : 0; 6913 6914 if (sym_verbose >= 2) 6915 printf ("%s: Delay (GEN=%d): %u msec, %u KHz\n", 6916 sym_name(np), gen, ms, f); 6917 6918 return f; 6919 } 6920 6921 static unsigned sym_getfreq (hcb_p np) 6922 { 6923 u_int f1, f2; 6924 int gen = 11; 6925 6926 (void) getfreq (np, gen); /* throw away first result */ 6927 f1 = getfreq (np, gen); 6928 f2 = getfreq (np, gen); 6929 if (f1 > f2) f1 = f2; /* trust lower result */ 6930 return f1; 6931 } 6932 6933 /* 6934 * Get/probe chip SCSI clock frequency 6935 */ 6936 static void sym_getclock (hcb_p np, int mult) 6937 { 6938 unsigned char scntl3 = np->sv_scntl3; 6939 unsigned char stest1 = np->sv_stest1; 6940 unsigned f1; 6941 6942 /* 6943 * For the C10 core, assume 40 MHz. 6944 */ 6945 if (np->features & FE_C10) { 6946 np->multiplier = mult; 6947 np->clock_khz = 40000 * mult; 6948 return; 6949 } 6950 6951 np->multiplier = 1; 6952 f1 = 40000; 6953 /* 6954 * True with 875/895/896/895A with clock multiplier selected 6955 */ 6956 if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) { 6957 if (sym_verbose >= 2) 6958 printf ("%s: clock multiplier found\n", sym_name(np)); 6959 np->multiplier = mult; 6960 } 6961 6962 /* 6963 * If multiplier not found or scntl3 not 7,5,3, 6964 * reset chip and get frequency from general purpose timer. 6965 * Otherwise trust scntl3 BIOS setting. 6966 */ 6967 if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) { 6968 OUTB (nc_stest1, 0); /* make sure doubler is OFF */ 6969 f1 = sym_getfreq (np); 6970 6971 if (sym_verbose) 6972 printf ("%s: chip clock is %uKHz\n", sym_name(np), f1); 6973 6974 if (f1 < 45000) f1 = 40000; 6975 else if (f1 < 55000) f1 = 50000; 6976 else f1 = 80000; 6977 6978 if (f1 < 80000 && mult > 1) { 6979 if (sym_verbose >= 2) 6980 printf ("%s: clock multiplier assumed\n", 6981 sym_name(np)); 6982 np->multiplier = mult; 6983 } 6984 } else { 6985 if ((scntl3 & 7) == 3) f1 = 40000; 6986 else if ((scntl3 & 7) == 5) f1 = 80000; 6987 else f1 = 160000; 6988 6989 f1 /= np->multiplier; 6990 } 6991 6992 /* 6993 * Compute controller synchronous parameters. 6994 */ 6995 f1 *= np->multiplier; 6996 np->clock_khz = f1; 6997 } 6998 6999 /* 7000 * Get/probe PCI clock frequency 7001 */ 7002 static int sym_getpciclock (hcb_p np) 7003 { 7004 int f = 0; 7005 7006 /* 7007 * For the C1010-33, this doesn't work. 7008 * For the C1010-66, this will be tested when I'll have 7009 * such a beast to play with. 7010 */ 7011 if (!(np->features & FE_C10)) { 7012 OUTB (nc_stest1, SCLK); /* Use the PCI clock as SCSI clock */ 7013 f = (int) sym_getfreq (np); 7014 OUTB (nc_stest1, 0); 7015 } 7016 np->pciclk_khz = f; 7017 7018 return f; 7019 } 7020 7021 /*============= DRIVER ACTION/COMPLETION ====================*/ 7022 7023 /* 7024 * Print something that tells about extended errors. 7025 */ 7026 static void sym_print_xerr(ccb_p cp, int x_status) 7027 { 7028 if (x_status & XE_PARITY_ERR) { 7029 PRINT_ADDR(cp); 7030 printf ("unrecovered SCSI parity error.\n"); 7031 } 7032 if (x_status & XE_EXTRA_DATA) { 7033 PRINT_ADDR(cp); 7034 printf ("extraneous data discarded.\n"); 7035 } 7036 if (x_status & XE_BAD_PHASE) { 7037 PRINT_ADDR(cp); 7038 printf ("illegal scsi phase (4/5).\n"); 7039 } 7040 if (x_status & XE_SODL_UNRUN) { 7041 PRINT_ADDR(cp); 7042 printf ("ODD transfer in DATA OUT phase.\n"); 7043 } 7044 if (x_status & XE_SWIDE_OVRUN) { 7045 PRINT_ADDR(cp); 7046 printf ("ODD transfer in DATA IN phase.\n"); 7047 } 7048 } 7049 7050 /* 7051 * Choose the more appropriate CAM status if 7052 * the IO encountered an extended error. 7053 */ 7054 static int sym_xerr_cam_status(int cam_status, int x_status) 7055 { 7056 if (x_status) { 7057 if (x_status & XE_PARITY_ERR) 7058 cam_status = CAM_UNCOR_PARITY; 7059 else if (x_status &(XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) 7060 cam_status = CAM_DATA_RUN_ERR; 7061 else if (x_status & XE_BAD_PHASE) 7062 cam_status = CAM_REQ_CMP_ERR; 7063 else 7064 cam_status = CAM_REQ_CMP_ERR; 7065 } 7066 return cam_status; 7067 } 7068 7069 /* 7070 * Complete execution of a SCSI command with extented 7071 * error, SCSI status error, or having been auto-sensed. 7072 * 7073 * The SCRIPTS processor is not running there, so we 7074 * can safely access IO registers and remove JOBs from 7075 * the START queue. 7076 * SCRATCHA is assumed to have been loaded with STARTPOS 7077 * before the SCRIPTS called the C code. 7078 */ 7079 static void sym_complete_error (hcb_p np, ccb_p cp) 7080 { 7081 struct ccb_scsiio *csio; 7082 u_int cam_status; 7083 int i, sense_returned; 7084 7085 SYM_LOCK_ASSERT(MA_OWNED); 7086 7087 /* 7088 * Paranoid check. :) 7089 */ 7090 if (!cp || !cp->cam_ccb) 7091 return; 7092 7093 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_RESULT)) { 7094 printf ("CCB=%lx STAT=%x/%x/%x DEV=%d/%d\n", (unsigned long)cp, 7095 cp->host_status, cp->ssss_status, cp->host_flags, 7096 cp->target, cp->lun); 7097 MDELAY(100); 7098 } 7099 7100 /* 7101 * Get CAM command pointer. 7102 */ 7103 csio = &cp->cam_ccb->csio; 7104 7105 /* 7106 * Check for extended errors. 7107 */ 7108 if (cp->xerr_status) { 7109 if (sym_verbose) 7110 sym_print_xerr(cp, cp->xerr_status); 7111 if (cp->host_status == HS_COMPLETE) 7112 cp->host_status = HS_COMP_ERR; 7113 } 7114 7115 /* 7116 * Calculate the residual. 7117 */ 7118 csio->sense_resid = 0; 7119 csio->resid = sym_compute_residual(np, cp); 7120 7121 if (!SYM_CONF_RESIDUAL_SUPPORT) {/* If user does not want residuals */ 7122 csio->resid = 0; /* throw them away. :) */ 7123 cp->sv_resid = 0; 7124 } 7125 7126 if (cp->host_flags & HF_SENSE) { /* Auto sense */ 7127 csio->scsi_status = cp->sv_scsi_status; /* Restore status */ 7128 csio->sense_resid = csio->resid; /* Swap residuals */ 7129 csio->resid = cp->sv_resid; 7130 cp->sv_resid = 0; 7131 if (sym_verbose && cp->sv_xerr_status) 7132 sym_print_xerr(cp, cp->sv_xerr_status); 7133 if (cp->host_status == HS_COMPLETE && 7134 cp->ssss_status == S_GOOD && 7135 cp->xerr_status == 0) { 7136 cam_status = sym_xerr_cam_status(CAM_SCSI_STATUS_ERROR, 7137 cp->sv_xerr_status); 7138 cam_status |= CAM_AUTOSNS_VALID; 7139 /* 7140 * Bounce back the sense data to user and 7141 * fix the residual. 7142 */ 7143 bzero(&csio->sense_data, sizeof(csio->sense_data)); 7144 sense_returned = SYM_SNS_BBUF_LEN - csio->sense_resid; 7145 if (sense_returned < csio->sense_len) 7146 csio->sense_resid = csio->sense_len - 7147 sense_returned; 7148 else 7149 csio->sense_resid = 0; 7150 bcopy(cp->sns_bbuf, &csio->sense_data, 7151 MIN(csio->sense_len, sense_returned)); 7152 #if 0 7153 /* 7154 * If the device reports a UNIT ATTENTION condition 7155 * due to a RESET condition, we should consider all 7156 * disconnect CCBs for this unit as aborted. 7157 */ 7158 if (1) { 7159 u_char *p; 7160 p = (u_char *) csio->sense_data; 7161 if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29) 7162 sym_clear_tasks(np, CAM_REQ_ABORTED, 7163 cp->target,cp->lun, -1); 7164 } 7165 #endif 7166 } 7167 else 7168 cam_status = CAM_AUTOSENSE_FAIL; 7169 } 7170 else if (cp->host_status == HS_COMPLETE) { /* Bad SCSI status */ 7171 csio->scsi_status = cp->ssss_status; 7172 cam_status = CAM_SCSI_STATUS_ERROR; 7173 } 7174 else if (cp->host_status == HS_SEL_TIMEOUT) /* Selection timeout */ 7175 cam_status = CAM_SEL_TIMEOUT; 7176 else if (cp->host_status == HS_UNEXPECTED) /* Unexpected BUS FREE*/ 7177 cam_status = CAM_UNEXP_BUSFREE; 7178 else { /* Extended error */ 7179 if (sym_verbose) { 7180 PRINT_ADDR(cp); 7181 printf ("COMMAND FAILED (%x %x %x).\n", 7182 cp->host_status, cp->ssss_status, 7183 cp->xerr_status); 7184 } 7185 csio->scsi_status = cp->ssss_status; 7186 /* 7187 * Set the most appropriate value for CAM status. 7188 */ 7189 cam_status = sym_xerr_cam_status(CAM_REQ_CMP_ERR, 7190 cp->xerr_status); 7191 } 7192 7193 /* 7194 * Dequeue all queued CCBs for that device 7195 * not yet started by SCRIPTS. 7196 */ 7197 i = (INL (nc_scratcha) - np->squeue_ba) / 4; 7198 (void) sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1); 7199 7200 /* 7201 * Restart the SCRIPTS processor. 7202 */ 7203 OUTL_DSP (SCRIPTA_BA (np, start)); 7204 7205 /* 7206 * Synchronize DMA map if needed. 7207 */ 7208 if (cp->dmamapped) { 7209 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7210 (cp->dmamapped == SYM_DMA_READ ? 7211 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)); 7212 } 7213 /* 7214 * Add this one to the COMP queue. 7215 * Complete all those commands with either error 7216 * or requeue condition. 7217 */ 7218 sym_set_cam_status((union ccb *) csio, cam_status); 7219 sym_remque(&cp->link_ccbq); 7220 sym_insque_head(&cp->link_ccbq, &np->comp_ccbq); 7221 sym_flush_comp_queue(np, 0); 7222 } 7223 7224 /* 7225 * Complete execution of a successful SCSI command. 7226 * 7227 * Only successful commands go to the DONE queue, 7228 * since we need to have the SCRIPTS processor 7229 * stopped on any error condition. 7230 * The SCRIPTS processor is running while we are 7231 * completing successful commands. 7232 */ 7233 static void sym_complete_ok (hcb_p np, ccb_p cp) 7234 { 7235 struct ccb_scsiio *csio; 7236 tcb_p tp; 7237 lcb_p lp; 7238 7239 SYM_LOCK_ASSERT(MA_OWNED); 7240 7241 /* 7242 * Paranoid check. :) 7243 */ 7244 if (!cp || !cp->cam_ccb) 7245 return; 7246 assert (cp->host_status == HS_COMPLETE); 7247 7248 /* 7249 * Get command, target and lun pointers. 7250 */ 7251 csio = &cp->cam_ccb->csio; 7252 tp = &np->target[cp->target]; 7253 lp = sym_lp(tp, cp->lun); 7254 7255 /* 7256 * Assume device discovered on first success. 7257 */ 7258 if (!lp) 7259 sym_set_bit(tp->lun_map, cp->lun); 7260 7261 /* 7262 * If all data have been transferred, given than no 7263 * extended error did occur, there is no residual. 7264 */ 7265 csio->resid = 0; 7266 if (cp->phys.head.lastp != cp->phys.head.goalp) 7267 csio->resid = sym_compute_residual(np, cp); 7268 7269 /* 7270 * Wrong transfer residuals may be worse than just always 7271 * returning zero. User can disable this feature from 7272 * sym_conf.h. Residual support is enabled by default. 7273 */ 7274 if (!SYM_CONF_RESIDUAL_SUPPORT) 7275 csio->resid = 0; 7276 7277 /* 7278 * Synchronize DMA map if needed. 7279 */ 7280 if (cp->dmamapped) { 7281 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7282 (cp->dmamapped == SYM_DMA_READ ? 7283 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)); 7284 } 7285 /* 7286 * Set status and complete the command. 7287 */ 7288 csio->scsi_status = cp->ssss_status; 7289 sym_set_cam_status((union ccb *) csio, CAM_REQ_CMP); 7290 sym_xpt_done(np, (union ccb *) csio, cp); 7291 sym_free_ccb(np, cp); 7292 } 7293 7294 /* 7295 * Our callout handler 7296 */ 7297 static void sym_callout(void *arg) 7298 { 7299 union ccb *ccb = (union ccb *) arg; 7300 hcb_p np = ccb->ccb_h.sym_hcb_ptr; 7301 7302 /* 7303 * Check that the CAM CCB is still queued. 7304 */ 7305 if (!np) 7306 return; 7307 7308 SYM_LOCK(); 7309 7310 switch(ccb->ccb_h.func_code) { 7311 case XPT_SCSI_IO: 7312 (void) sym_abort_scsiio(np, ccb, 1); 7313 break; 7314 default: 7315 break; 7316 } 7317 7318 SYM_UNLOCK(); 7319 } 7320 7321 /* 7322 * Abort an SCSI IO. 7323 */ 7324 static int sym_abort_scsiio(hcb_p np, union ccb *ccb, int timed_out) 7325 { 7326 ccb_p cp; 7327 SYM_QUEHEAD *qp; 7328 7329 SYM_LOCK_ASSERT(MA_OWNED); 7330 7331 /* 7332 * Look up our CCB control block. 7333 */ 7334 cp = NULL; 7335 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { 7336 ccb_p cp2 = sym_que_entry(qp, struct sym_ccb, link_ccbq); 7337 if (cp2->cam_ccb == ccb) { 7338 cp = cp2; 7339 break; 7340 } 7341 } 7342 if (!cp || cp->host_status == HS_WAIT) 7343 return -1; 7344 7345 /* 7346 * If a previous abort didn't succeed in time, 7347 * perform a BUS reset. 7348 */ 7349 if (cp->to_abort) { 7350 sym_reset_scsi_bus(np, 1); 7351 return 0; 7352 } 7353 7354 /* 7355 * Mark the CCB for abort and allow time for. 7356 */ 7357 cp->to_abort = timed_out ? 2 : 1; 7358 callout_reset(&cp->ch, 10 * hz, sym_callout, (caddr_t) ccb); 7359 7360 /* 7361 * Tell the SCRIPTS processor to stop and synchronize with us. 7362 */ 7363 np->istat_sem = SEM; 7364 OUTB (nc_istat, SIGP|SEM); 7365 return 0; 7366 } 7367 7368 /* 7369 * Reset a SCSI device (all LUNs of a target). 7370 */ 7371 static void sym_reset_dev(hcb_p np, union ccb *ccb) 7372 { 7373 tcb_p tp; 7374 struct ccb_hdr *ccb_h = &ccb->ccb_h; 7375 7376 SYM_LOCK_ASSERT(MA_OWNED); 7377 7378 if (ccb_h->target_id == np->myaddr || 7379 ccb_h->target_id >= SYM_CONF_MAX_TARGET || 7380 ccb_h->target_lun >= SYM_CONF_MAX_LUN) { 7381 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7382 return; 7383 } 7384 7385 tp = &np->target[ccb_h->target_id]; 7386 7387 tp->to_reset = 1; 7388 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 7389 7390 np->istat_sem = SEM; 7391 OUTB (nc_istat, SIGP|SEM); 7392 } 7393 7394 /* 7395 * SIM action entry point. 7396 */ 7397 static void sym_action(struct cam_sim *sim, union ccb *ccb) 7398 { 7399 hcb_p np; 7400 tcb_p tp; 7401 lcb_p lp; 7402 ccb_p cp; 7403 int tmp; 7404 u_char idmsg, *msgptr; 7405 u_int msglen; 7406 struct ccb_scsiio *csio; 7407 struct ccb_hdr *ccb_h; 7408 7409 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("sym_action\n")); 7410 7411 /* 7412 * Retrieve our controller data structure. 7413 */ 7414 np = (hcb_p) cam_sim_softc(sim); 7415 7416 SYM_LOCK_ASSERT(MA_OWNED); 7417 7418 /* 7419 * The common case is SCSI IO. 7420 * We deal with other ones elsewhere. 7421 */ 7422 if (ccb->ccb_h.func_code != XPT_SCSI_IO) { 7423 sym_action2(sim, ccb); 7424 return; 7425 } 7426 csio = &ccb->csio; 7427 ccb_h = &csio->ccb_h; 7428 7429 /* 7430 * Work around races. 7431 */ 7432 if ((ccb_h->status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 7433 xpt_done(ccb); 7434 return; 7435 } 7436 7437 /* 7438 * Minimal checkings, so that we will not 7439 * go outside our tables. 7440 */ 7441 if (ccb_h->target_id == np->myaddr || 7442 ccb_h->target_id >= SYM_CONF_MAX_TARGET || 7443 ccb_h->target_lun >= SYM_CONF_MAX_LUN) { 7444 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7445 return; 7446 } 7447 7448 /* 7449 * Retrieve the target and lun descriptors. 7450 */ 7451 tp = &np->target[ccb_h->target_id]; 7452 lp = sym_lp(tp, ccb_h->target_lun); 7453 7454 /* 7455 * Complete the 1st INQUIRY command with error 7456 * condition if the device is flagged NOSCAN 7457 * at BOOT in the NVRAM. This may speed up 7458 * the boot and maintain coherency with BIOS 7459 * device numbering. Clearing the flag allows 7460 * user to rescan skipped devices later. 7461 * We also return error for devices not flagged 7462 * for SCAN LUNS in the NVRAM since some mono-lun 7463 * devices behave badly when asked for some non 7464 * zero LUN. Btw, this is an absolute hack.:-) 7465 */ 7466 if (!(ccb_h->flags & CAM_CDB_PHYS) && 7467 (0x12 == ((ccb_h->flags & CAM_CDB_POINTER) ? 7468 csio->cdb_io.cdb_ptr[0] : csio->cdb_io.cdb_bytes[0]))) { 7469 if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) || 7470 ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && 7471 ccb_h->target_lun != 0)) { 7472 tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; 7473 sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE); 7474 return; 7475 } 7476 } 7477 7478 /* 7479 * Get a control block for this IO. 7480 */ 7481 tmp = ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0); 7482 cp = sym_get_ccb(np, ccb_h->target_id, ccb_h->target_lun, tmp); 7483 if (!cp) { 7484 sym_xpt_done2(np, ccb, CAM_RESRC_UNAVAIL); 7485 return; 7486 } 7487 7488 /* 7489 * Keep track of the IO in our CCB. 7490 */ 7491 cp->cam_ccb = ccb; 7492 7493 /* 7494 * Build the IDENTIFY message. 7495 */ 7496 idmsg = M_IDENTIFY | cp->lun; 7497 if (cp->tag != NO_TAG || (lp && (lp->current_flags & SYM_DISC_ENABLED))) 7498 idmsg |= 0x40; 7499 7500 msgptr = cp->scsi_smsg; 7501 msglen = 0; 7502 msgptr[msglen++] = idmsg; 7503 7504 /* 7505 * Build the tag message if present. 7506 */ 7507 if (cp->tag != NO_TAG) { 7508 u_char order = csio->tag_action; 7509 7510 switch(order) { 7511 case M_ORDERED_TAG: 7512 break; 7513 case M_HEAD_TAG: 7514 break; 7515 default: 7516 order = M_SIMPLE_TAG; 7517 } 7518 msgptr[msglen++] = order; 7519 7520 /* 7521 * For less than 128 tags, actual tags are numbered 7522 * 1,3,5,..2*MAXTAGS+1,since we may have to deal 7523 * with devices that have problems with #TAG 0 or too 7524 * great #TAG numbers. For more tags (up to 256), 7525 * we use directly our tag number. 7526 */ 7527 #if SYM_CONF_MAX_TASK > (512/4) 7528 msgptr[msglen++] = cp->tag; 7529 #else 7530 msgptr[msglen++] = (cp->tag << 1) + 1; 7531 #endif 7532 } 7533 7534 /* 7535 * Build a negotiation message if needed. 7536 * (nego_status is filled by sym_prepare_nego()) 7537 */ 7538 cp->nego_status = 0; 7539 if (tp->tinfo.current.width != tp->tinfo.goal.width || 7540 tp->tinfo.current.period != tp->tinfo.goal.period || 7541 tp->tinfo.current.offset != tp->tinfo.goal.offset || 7542 tp->tinfo.current.options != tp->tinfo.goal.options) { 7543 if (!tp->nego_cp && lp) 7544 msglen += sym_prepare_nego(np, cp, 0, msgptr + msglen); 7545 } 7546 7547 /* 7548 * Fill in our ccb 7549 */ 7550 7551 /* 7552 * Startqueue 7553 */ 7554 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA (np, select)); 7555 cp->phys.head.go.restart = cpu_to_scr(SCRIPTA_BA (np, resel_dsa)); 7556 7557 /* 7558 * select 7559 */ 7560 cp->phys.select.sel_id = cp->target; 7561 cp->phys.select.sel_scntl3 = tp->head.wval; 7562 cp->phys.select.sel_sxfer = tp->head.sval; 7563 cp->phys.select.sel_scntl4 = tp->head.uval; 7564 7565 /* 7566 * message 7567 */ 7568 cp->phys.smsg.addr = cpu_to_scr(CCB_BA (cp, scsi_smsg)); 7569 cp->phys.smsg.size = cpu_to_scr(msglen); 7570 7571 /* 7572 * command 7573 */ 7574 if (sym_setup_cdb(np, csio, cp) < 0) { 7575 sym_xpt_done(np, ccb, cp); 7576 sym_free_ccb(np, cp); 7577 return; 7578 } 7579 7580 /* 7581 * status 7582 */ 7583 #if 0 /* Provision */ 7584 cp->actualquirks = tp->quirks; 7585 #endif 7586 cp->actualquirks = SYM_QUIRK_AUTOSAVE; 7587 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 7588 cp->ssss_status = S_ILLEGAL; 7589 cp->xerr_status = 0; 7590 cp->host_flags = 0; 7591 cp->extra_bytes = 0; 7592 7593 /* 7594 * extreme data pointer. 7595 * shall be positive, so -1 is lower than lowest.:) 7596 */ 7597 cp->ext_sg = -1; 7598 cp->ext_ofs = 0; 7599 7600 /* 7601 * Build the data descriptor block 7602 * and start the IO. 7603 */ 7604 sym_setup_data_and_start(np, csio, cp); 7605 } 7606 7607 /* 7608 * Setup buffers and pointers that address the CDB. 7609 * I bet, physical CDBs will never be used on the planet, 7610 * since they can be bounced without significant overhead. 7611 */ 7612 static int sym_setup_cdb(hcb_p np, struct ccb_scsiio *csio, ccb_p cp) 7613 { 7614 struct ccb_hdr *ccb_h; 7615 u32 cmd_ba; 7616 int cmd_len; 7617 7618 SYM_LOCK_ASSERT(MA_OWNED); 7619 7620 ccb_h = &csio->ccb_h; 7621 7622 /* 7623 * CDB is 16 bytes max. 7624 */ 7625 if (csio->cdb_len > sizeof(cp->cdb_buf)) { 7626 sym_set_cam_status(cp->cam_ccb, CAM_REQ_INVALID); 7627 return -1; 7628 } 7629 cmd_len = csio->cdb_len; 7630 7631 if (ccb_h->flags & CAM_CDB_POINTER) { 7632 /* CDB is a pointer */ 7633 if (!(ccb_h->flags & CAM_CDB_PHYS)) { 7634 /* CDB pointer is virtual */ 7635 bcopy(csio->cdb_io.cdb_ptr, cp->cdb_buf, cmd_len); 7636 cmd_ba = CCB_BA (cp, cdb_buf[0]); 7637 } else { 7638 /* CDB pointer is physical */ 7639 #if 0 7640 cmd_ba = ((u32)csio->cdb_io.cdb_ptr) & 0xffffffff; 7641 #else 7642 sym_set_cam_status(cp->cam_ccb, CAM_REQ_INVALID); 7643 return -1; 7644 #endif 7645 } 7646 } else { 7647 /* CDB is in the CAM ccb (buffer) */ 7648 bcopy(csio->cdb_io.cdb_bytes, cp->cdb_buf, cmd_len); 7649 cmd_ba = CCB_BA (cp, cdb_buf[0]); 7650 } 7651 7652 cp->phys.cmd.addr = cpu_to_scr(cmd_ba); 7653 cp->phys.cmd.size = cpu_to_scr(cmd_len); 7654 7655 return 0; 7656 } 7657 7658 /* 7659 * Set up data pointers used by SCRIPTS. 7660 */ 7661 static void __inline 7662 sym_setup_data_pointers(hcb_p np, ccb_p cp, int dir) 7663 { 7664 u32 lastp, goalp; 7665 7666 SYM_LOCK_ASSERT(MA_OWNED); 7667 7668 /* 7669 * No segments means no data. 7670 */ 7671 if (!cp->segments) 7672 dir = CAM_DIR_NONE; 7673 7674 /* 7675 * Set the data pointer. 7676 */ 7677 switch(dir) { 7678 case CAM_DIR_OUT: 7679 goalp = SCRIPTA_BA (np, data_out2) + 8; 7680 lastp = goalp - 8 - (cp->segments * (2*4)); 7681 break; 7682 case CAM_DIR_IN: 7683 cp->host_flags |= HF_DATA_IN; 7684 goalp = SCRIPTA_BA (np, data_in2) + 8; 7685 lastp = goalp - 8 - (cp->segments * (2*4)); 7686 break; 7687 case CAM_DIR_NONE: 7688 default: 7689 lastp = goalp = SCRIPTB_BA (np, no_data); 7690 break; 7691 } 7692 7693 cp->phys.head.lastp = cpu_to_scr(lastp); 7694 cp->phys.head.goalp = cpu_to_scr(goalp); 7695 cp->phys.head.savep = cpu_to_scr(lastp); 7696 cp->startp = cp->phys.head.savep; 7697 } 7698 7699 /* 7700 * Call back routine for the DMA map service. 7701 * If bounce buffers are used (why ?), we may sleep and then 7702 * be called there in another context. 7703 */ 7704 static void 7705 sym_execute_ccb(void *arg, bus_dma_segment_t *psegs, int nsegs, int error) 7706 { 7707 ccb_p cp; 7708 hcb_p np; 7709 union ccb *ccb; 7710 7711 cp = (ccb_p) arg; 7712 ccb = cp->cam_ccb; 7713 np = (hcb_p) cp->arg; 7714 7715 SYM_LOCK_ASSERT(MA_OWNED); 7716 7717 /* 7718 * Deal with weird races. 7719 */ 7720 if (sym_get_cam_status(ccb) != CAM_REQ_INPROG) 7721 goto out_abort; 7722 7723 /* 7724 * Deal with weird errors. 7725 */ 7726 if (error) { 7727 cp->dmamapped = 0; 7728 sym_set_cam_status(cp->cam_ccb, CAM_REQ_ABORTED); 7729 goto out_abort; 7730 } 7731 7732 /* 7733 * Build the data descriptor for the chip. 7734 */ 7735 if (nsegs) { 7736 int retv; 7737 /* 896 rev 1 requires to be careful about boundaries */ 7738 if (np->device_id == PCI_ID_SYM53C896 && np->revision_id <= 1) 7739 retv = sym_scatter_sg_physical(np, cp, psegs, nsegs); 7740 else 7741 retv = sym_fast_scatter_sg_physical(np,cp, psegs,nsegs); 7742 if (retv < 0) { 7743 sym_set_cam_status(cp->cam_ccb, CAM_REQ_TOO_BIG); 7744 goto out_abort; 7745 } 7746 } 7747 7748 /* 7749 * Synchronize the DMA map only if we have 7750 * actually mapped the data. 7751 */ 7752 if (cp->dmamapped) { 7753 bus_dmamap_sync(np->data_dmat, cp->dmamap, 7754 (cp->dmamapped == SYM_DMA_READ ? 7755 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 7756 } 7757 7758 /* 7759 * Set host status to busy state. 7760 * May have been set back to HS_WAIT to avoid a race. 7761 */ 7762 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 7763 7764 /* 7765 * Set data pointers. 7766 */ 7767 sym_setup_data_pointers(np, cp, (ccb->ccb_h.flags & CAM_DIR_MASK)); 7768 7769 /* 7770 * Enqueue this IO in our pending queue. 7771 */ 7772 sym_enqueue_cam_ccb(cp); 7773 7774 /* 7775 * When `#ifed 1', the code below makes the driver 7776 * panic on the first attempt to write to a SCSI device. 7777 * It is the first test we want to do after a driver 7778 * change that does not seem obviously safe. :) 7779 */ 7780 #if 0 7781 switch (cp->cdb_buf[0]) { 7782 case 0x0A: case 0x2A: case 0xAA: 7783 panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n"); 7784 MDELAY(10000); 7785 break; 7786 default: 7787 break; 7788 } 7789 #endif 7790 /* 7791 * Activate this job. 7792 */ 7793 sym_put_start_queue(np, cp); 7794 return; 7795 out_abort: 7796 sym_xpt_done(np, ccb, cp); 7797 sym_free_ccb(np, cp); 7798 } 7799 7800 /* 7801 * How complex it gets to deal with the data in CAM. 7802 * The Bus Dma stuff makes things still more complex. 7803 */ 7804 static void 7805 sym_setup_data_and_start(hcb_p np, struct ccb_scsiio *csio, ccb_p cp) 7806 { 7807 struct ccb_hdr *ccb_h; 7808 int dir, retv; 7809 7810 SYM_LOCK_ASSERT(MA_OWNED); 7811 7812 ccb_h = &csio->ccb_h; 7813 7814 /* 7815 * Now deal with the data. 7816 */ 7817 cp->data_len = csio->dxfer_len; 7818 cp->arg = np; 7819 7820 /* 7821 * No direction means no data. 7822 */ 7823 dir = (ccb_h->flags & CAM_DIR_MASK); 7824 if (dir == CAM_DIR_NONE) { 7825 sym_execute_ccb(cp, NULL, 0, 0); 7826 return; 7827 } 7828 7829 cp->dmamapped = (dir == CAM_DIR_IN) ? SYM_DMA_READ : SYM_DMA_WRITE; 7830 retv = bus_dmamap_load_ccb(np->data_dmat, cp->dmamap, 7831 (union ccb *)csio, sym_execute_ccb, cp, 0); 7832 if (retv == EINPROGRESS) { 7833 cp->host_status = HS_WAIT; 7834 xpt_freeze_simq(np->sim, 1); 7835 csio->ccb_h.status |= CAM_RELEASE_SIMQ; 7836 } 7837 } 7838 7839 /* 7840 * Move the scatter list to our data block. 7841 */ 7842 static int 7843 sym_fast_scatter_sg_physical(hcb_p np, ccb_p cp, 7844 bus_dma_segment_t *psegs, int nsegs) 7845 { 7846 struct sym_tblmove *data; 7847 bus_dma_segment_t *psegs2; 7848 7849 SYM_LOCK_ASSERT(MA_OWNED); 7850 7851 if (nsegs > SYM_CONF_MAX_SG) 7852 return -1; 7853 7854 data = &cp->phys.data[SYM_CONF_MAX_SG-1]; 7855 psegs2 = &psegs[nsegs-1]; 7856 cp->segments = nsegs; 7857 7858 while (1) { 7859 data->addr = cpu_to_scr(psegs2->ds_addr); 7860 data->size = cpu_to_scr(psegs2->ds_len); 7861 if (DEBUG_FLAGS & DEBUG_SCATTER) { 7862 printf ("%s scatter: paddr=%lx len=%ld\n", 7863 sym_name(np), (long) psegs2->ds_addr, 7864 (long) psegs2->ds_len); 7865 } 7866 if (psegs2 != psegs) { 7867 --data; 7868 --psegs2; 7869 continue; 7870 } 7871 break; 7872 } 7873 return 0; 7874 } 7875 7876 /* 7877 * Scatter a SG list with physical addresses into bus addressable chunks. 7878 */ 7879 static int 7880 sym_scatter_sg_physical(hcb_p np, ccb_p cp, bus_dma_segment_t *psegs, int nsegs) 7881 { 7882 u_long ps, pe, pn; 7883 u_long k; 7884 int s, t; 7885 7886 SYM_LOCK_ASSERT(MA_OWNED); 7887 7888 s = SYM_CONF_MAX_SG - 1; 7889 t = nsegs - 1; 7890 ps = psegs[t].ds_addr; 7891 pe = ps + psegs[t].ds_len; 7892 7893 while (s >= 0) { 7894 pn = rounddown2(pe - 1, SYM_CONF_DMA_BOUNDARY); 7895 if (pn <= ps) 7896 pn = ps; 7897 k = pe - pn; 7898 if (DEBUG_FLAGS & DEBUG_SCATTER) { 7899 printf ("%s scatter: paddr=%lx len=%ld\n", 7900 sym_name(np), pn, k); 7901 } 7902 cp->phys.data[s].addr = cpu_to_scr(pn); 7903 cp->phys.data[s].size = cpu_to_scr(k); 7904 --s; 7905 if (pn == ps) { 7906 if (--t < 0) 7907 break; 7908 ps = psegs[t].ds_addr; 7909 pe = ps + psegs[t].ds_len; 7910 } 7911 else 7912 pe = pn; 7913 } 7914 7915 cp->segments = SYM_CONF_MAX_SG - 1 - s; 7916 7917 return t >= 0 ? -1 : 0; 7918 } 7919 7920 /* 7921 * SIM action for non performance critical stuff. 7922 */ 7923 static void sym_action2(struct cam_sim *sim, union ccb *ccb) 7924 { 7925 union ccb *abort_ccb; 7926 struct ccb_hdr *ccb_h; 7927 struct ccb_pathinq *cpi; 7928 struct ccb_trans_settings *cts; 7929 struct sym_trans *tip; 7930 hcb_p np; 7931 tcb_p tp; 7932 lcb_p lp; 7933 u_char dflags; 7934 7935 /* 7936 * Retrieve our controller data structure. 7937 */ 7938 np = (hcb_p) cam_sim_softc(sim); 7939 7940 SYM_LOCK_ASSERT(MA_OWNED); 7941 7942 ccb_h = &ccb->ccb_h; 7943 7944 switch (ccb_h->func_code) { 7945 case XPT_SET_TRAN_SETTINGS: 7946 cts = &ccb->cts; 7947 tp = &np->target[ccb_h->target_id]; 7948 7949 /* 7950 * Update SPI transport settings in TARGET control block. 7951 * Update SCSI device settings in LUN control block. 7952 */ 7953 lp = sym_lp(tp, ccb_h->target_lun); 7954 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 7955 sym_update_trans(np, &tp->tinfo.goal, cts); 7956 if (lp) 7957 sym_update_dflags(np, &lp->current_flags, cts); 7958 } 7959 if (cts->type == CTS_TYPE_USER_SETTINGS) { 7960 sym_update_trans(np, &tp->tinfo.user, cts); 7961 if (lp) 7962 sym_update_dflags(np, &lp->user_flags, cts); 7963 } 7964 7965 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 7966 break; 7967 case XPT_GET_TRAN_SETTINGS: 7968 cts = &ccb->cts; 7969 tp = &np->target[ccb_h->target_id]; 7970 lp = sym_lp(tp, ccb_h->target_lun); 7971 7972 #define cts__scsi (&cts->proto_specific.scsi) 7973 #define cts__spi (&cts->xport_specific.spi) 7974 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 7975 tip = &tp->tinfo.current; 7976 dflags = lp ? lp->current_flags : 0; 7977 } 7978 else { 7979 tip = &tp->tinfo.user; 7980 dflags = lp ? lp->user_flags : tp->usrflags; 7981 } 7982 7983 cts->protocol = PROTO_SCSI; 7984 cts->transport = XPORT_SPI; 7985 cts->protocol_version = tip->scsi_version; 7986 cts->transport_version = tip->spi_version; 7987 7988 cts__spi->sync_period = tip->period; 7989 cts__spi->sync_offset = tip->offset; 7990 cts__spi->bus_width = tip->width; 7991 cts__spi->ppr_options = tip->options; 7992 7993 cts__spi->valid = CTS_SPI_VALID_SYNC_RATE 7994 | CTS_SPI_VALID_SYNC_OFFSET 7995 | CTS_SPI_VALID_BUS_WIDTH 7996 | CTS_SPI_VALID_PPR_OPTIONS; 7997 7998 cts__spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 7999 if (dflags & SYM_DISC_ENABLED) 8000 cts__spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 8001 cts__spi->valid |= CTS_SPI_VALID_DISC; 8002 8003 cts__scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 8004 if (dflags & SYM_TAGS_ENABLED) 8005 cts__scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 8006 cts__scsi->valid |= CTS_SCSI_VALID_TQ; 8007 #undef cts__spi 8008 #undef cts__scsi 8009 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8010 break; 8011 case XPT_CALC_GEOMETRY: 8012 cam_calc_geometry(&ccb->ccg, /*extended*/1); 8013 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8014 break; 8015 case XPT_PATH_INQ: 8016 cpi = &ccb->cpi; 8017 cpi->version_num = 1; 8018 cpi->hba_inquiry = PI_MDP_ABLE|PI_SDTR_ABLE|PI_TAG_ABLE; 8019 if ((np->features & FE_WIDE) != 0) 8020 cpi->hba_inquiry |= PI_WIDE_16; 8021 cpi->target_sprt = 0; 8022 cpi->hba_misc = PIM_UNMAPPED; 8023 if (np->usrflags & SYM_SCAN_TARGETS_HILO) 8024 cpi->hba_misc |= PIM_SCANHILO; 8025 if (np->usrflags & SYM_AVOID_BUS_RESET) 8026 cpi->hba_misc |= PIM_NOBUSRESET; 8027 cpi->hba_eng_cnt = 0; 8028 cpi->max_target = (np->features & FE_WIDE) ? 15 : 7; 8029 /* Semantic problem:)LUN number max = max number of LUNs - 1 */ 8030 cpi->max_lun = SYM_CONF_MAX_LUN-1; 8031 if (SYM_SETUP_MAX_LUN < SYM_CONF_MAX_LUN) 8032 cpi->max_lun = SYM_SETUP_MAX_LUN-1; 8033 cpi->bus_id = cam_sim_bus(sim); 8034 cpi->initiator_id = np->myaddr; 8035 cpi->base_transfer_speed = 3300; 8036 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 8037 strlcpy(cpi->hba_vid, "Symbios", HBA_IDLEN); 8038 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 8039 cpi->unit_number = cam_sim_unit(sim); 8040 8041 cpi->protocol = PROTO_SCSI; 8042 cpi->protocol_version = SCSI_REV_2; 8043 cpi->transport = XPORT_SPI; 8044 cpi->transport_version = 2; 8045 cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_ST; 8046 if (np->features & FE_ULTRA3) { 8047 cpi->transport_version = 3; 8048 cpi->xport_specific.spi.ppr_options = 8049 SID_SPI_CLOCK_DT_ST; 8050 } 8051 cpi->maxio = SYM_CONF_MAX_SG * PAGE_SIZE; 8052 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8053 break; 8054 case XPT_ABORT: 8055 abort_ccb = ccb->cab.abort_ccb; 8056 switch(abort_ccb->ccb_h.func_code) { 8057 case XPT_SCSI_IO: 8058 if (sym_abort_scsiio(np, abort_ccb, 0) == 0) { 8059 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8060 break; 8061 } 8062 default: 8063 sym_xpt_done2(np, ccb, CAM_UA_ABORT); 8064 break; 8065 } 8066 break; 8067 case XPT_RESET_DEV: 8068 sym_reset_dev(np, ccb); 8069 break; 8070 case XPT_RESET_BUS: 8071 sym_reset_scsi_bus(np, 0); 8072 if (sym_verbose) { 8073 xpt_print_path(np->path); 8074 printf("SCSI BUS reset delivered.\n"); 8075 } 8076 sym_init (np, 1); 8077 sym_xpt_done2(np, ccb, CAM_REQ_CMP); 8078 break; 8079 case XPT_TERM_IO: 8080 default: 8081 sym_xpt_done2(np, ccb, CAM_REQ_INVALID); 8082 break; 8083 } 8084 } 8085 8086 /* 8087 * Asynchronous notification handler. 8088 */ 8089 static void 8090 sym_async(void *cb_arg, u32 code, struct cam_path *path, void *args __unused) 8091 { 8092 hcb_p np; 8093 struct cam_sim *sim; 8094 u_int tn; 8095 tcb_p tp; 8096 8097 sim = (struct cam_sim *) cb_arg; 8098 np = (hcb_p) cam_sim_softc(sim); 8099 8100 SYM_LOCK_ASSERT(MA_OWNED); 8101 8102 switch (code) { 8103 case AC_LOST_DEVICE: 8104 tn = xpt_path_target_id(path); 8105 if (tn >= SYM_CONF_MAX_TARGET) 8106 break; 8107 8108 tp = &np->target[tn]; 8109 8110 tp->to_reset = 0; 8111 tp->head.sval = 0; 8112 tp->head.wval = np->rv_scntl3; 8113 tp->head.uval = 0; 8114 8115 tp->tinfo.current.period = tp->tinfo.goal.period = 0; 8116 tp->tinfo.current.offset = tp->tinfo.goal.offset = 0; 8117 tp->tinfo.current.width = tp->tinfo.goal.width = BUS_8_BIT; 8118 tp->tinfo.current.options = tp->tinfo.goal.options = 0; 8119 8120 break; 8121 default: 8122 break; 8123 } 8124 } 8125 8126 /* 8127 * Update transfer settings of a target. 8128 */ 8129 static void sym_update_trans(hcb_p np, struct sym_trans *tip, 8130 struct ccb_trans_settings *cts) 8131 { 8132 8133 SYM_LOCK_ASSERT(MA_OWNED); 8134 8135 /* 8136 * Update the infos. 8137 */ 8138 #define cts__spi (&cts->xport_specific.spi) 8139 if ((cts__spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) 8140 tip->width = cts__spi->bus_width; 8141 if ((cts__spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) 8142 tip->offset = cts__spi->sync_offset; 8143 if ((cts__spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 8144 tip->period = cts__spi->sync_period; 8145 if ((cts__spi->valid & CTS_SPI_VALID_PPR_OPTIONS) != 0) 8146 tip->options = (cts__spi->ppr_options & PPR_OPT_DT); 8147 if (cts->protocol_version != PROTO_VERSION_UNSPECIFIED && 8148 cts->protocol_version != PROTO_VERSION_UNKNOWN) 8149 tip->scsi_version = cts->protocol_version; 8150 if (cts->transport_version != XPORT_VERSION_UNSPECIFIED && 8151 cts->transport_version != XPORT_VERSION_UNKNOWN) 8152 tip->spi_version = cts->transport_version; 8153 #undef cts__spi 8154 /* 8155 * Scale against driver configuration limits. 8156 */ 8157 if (tip->width > SYM_SETUP_MAX_WIDE) tip->width = SYM_SETUP_MAX_WIDE; 8158 if (tip->period && tip->offset) { 8159 if (tip->offset > SYM_SETUP_MAX_OFFS) tip->offset = SYM_SETUP_MAX_OFFS; 8160 if (tip->period < SYM_SETUP_MIN_SYNC) tip->period = SYM_SETUP_MIN_SYNC; 8161 } else { 8162 tip->offset = 0; 8163 tip->period = 0; 8164 } 8165 8166 /* 8167 * Scale against actual controller BUS width. 8168 */ 8169 if (tip->width > np->maxwide) 8170 tip->width = np->maxwide; 8171 8172 /* 8173 * Only accept DT if controller supports and SYNC/WIDE asked. 8174 */ 8175 if (!((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) || 8176 !(tip->width == BUS_16_BIT && tip->offset)) { 8177 tip->options &= ~PPR_OPT_DT; 8178 } 8179 8180 /* 8181 * Scale period factor and offset against controller limits. 8182 */ 8183 if (tip->offset && tip->period) { 8184 if (tip->options & PPR_OPT_DT) { 8185 if (tip->period < np->minsync_dt) 8186 tip->period = np->minsync_dt; 8187 if (tip->period > np->maxsync_dt) 8188 tip->period = np->maxsync_dt; 8189 if (tip->offset > np->maxoffs_dt) 8190 tip->offset = np->maxoffs_dt; 8191 } 8192 else { 8193 if (tip->period < np->minsync) 8194 tip->period = np->minsync; 8195 if (tip->period > np->maxsync) 8196 tip->period = np->maxsync; 8197 if (tip->offset > np->maxoffs) 8198 tip->offset = np->maxoffs; 8199 } 8200 } 8201 } 8202 8203 /* 8204 * Update flags for a device (logical unit). 8205 */ 8206 static void 8207 sym_update_dflags(hcb_p np, u_char *flags, struct ccb_trans_settings *cts) 8208 { 8209 8210 SYM_LOCK_ASSERT(MA_OWNED); 8211 8212 #define cts__scsi (&cts->proto_specific.scsi) 8213 #define cts__spi (&cts->xport_specific.spi) 8214 if ((cts__spi->valid & CTS_SPI_VALID_DISC) != 0) { 8215 if ((cts__spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 8216 *flags |= SYM_DISC_ENABLED; 8217 else 8218 *flags &= ~SYM_DISC_ENABLED; 8219 } 8220 8221 if ((cts__scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 8222 if ((cts__scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 8223 *flags |= SYM_TAGS_ENABLED; 8224 else 8225 *flags &= ~SYM_TAGS_ENABLED; 8226 } 8227 #undef cts__spi 8228 #undef cts__scsi 8229 } 8230 8231 /*============= DRIVER INITIALISATION ==================*/ 8232 8233 static device_method_t sym_pci_methods[] = { 8234 DEVMETHOD(device_probe, sym_pci_probe), 8235 DEVMETHOD(device_attach, sym_pci_attach), 8236 DEVMETHOD_END 8237 }; 8238 8239 static driver_t sym_pci_driver = { 8240 "sym", 8241 sym_pci_methods, 8242 1 /* no softc */ 8243 }; 8244 8245 DRIVER_MODULE(sym, pci, sym_pci_driver, NULL, NULL); 8246 MODULE_DEPEND(sym, cam, 1, 1, 1); 8247 MODULE_DEPEND(sym, pci, 1, 1, 1); 8248 8249 static const struct sym_pci_chip sym_pci_dev_table[] = { 8250 {PCI_ID_SYM53C810, 0x0f, "810", 4, 8, 4, 64, 8251 FE_ERL} 8252 , 8253 #ifdef SYM_DEBUG_GENERIC_SUPPORT 8254 {PCI_ID_SYM53C810, 0xff, "810a", 4, 8, 4, 1, 8255 FE_BOF} 8256 , 8257 #else 8258 {PCI_ID_SYM53C810, 0xff, "810a", 4, 8, 4, 1, 8259 FE_CACHE_SET|FE_LDSTR|FE_PFEN|FE_BOF} 8260 , 8261 #endif 8262 {PCI_ID_SYM53C815, 0xff, "815", 4, 8, 4, 64, 8263 FE_BOF|FE_ERL} 8264 , 8265 {PCI_ID_SYM53C825, 0x0f, "825", 6, 8, 4, 64, 8266 FE_WIDE|FE_BOF|FE_ERL|FE_DIFF} 8267 , 8268 {PCI_ID_SYM53C825, 0xff, "825a", 6, 8, 4, 2, 8269 FE_WIDE|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM|FE_DIFF} 8270 , 8271 {PCI_ID_SYM53C860, 0xff, "860", 4, 8, 5, 1, 8272 FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN} 8273 , 8274 {PCI_ID_SYM53C875, 0x01, "875", 6, 16, 5, 2, 8275 FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8276 FE_RAM|FE_DIFF} 8277 , 8278 {PCI_ID_SYM53C875, 0xff, "875", 6, 16, 5, 2, 8279 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8280 FE_RAM|FE_DIFF} 8281 , 8282 {PCI_ID_SYM53C875_2, 0xff, "875", 6, 16, 5, 2, 8283 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8284 FE_RAM|FE_DIFF} 8285 , 8286 {PCI_ID_SYM53C885, 0xff, "885", 6, 16, 5, 2, 8287 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8288 FE_RAM|FE_DIFF} 8289 , 8290 #ifdef SYM_DEBUG_GENERIC_SUPPORT 8291 {PCI_ID_SYM53C895, 0xff, "895", 6, 31, 7, 2, 8292 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS| 8293 FE_RAM|FE_LCKFRQ} 8294 , 8295 #else 8296 {PCI_ID_SYM53C895, 0xff, "895", 6, 31, 7, 2, 8297 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8298 FE_RAM|FE_LCKFRQ} 8299 , 8300 #endif 8301 {PCI_ID_SYM53C896, 0xff, "896", 6, 31, 7, 4, 8302 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8303 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ} 8304 , 8305 {PCI_ID_SYM53C895A, 0xff, "895a", 6, 31, 7, 4, 8306 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8307 FE_RAM|FE_RAM8K|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ} 8308 , 8309 {PCI_ID_LSI53C1010, 0x00, "1010-33", 6, 31, 7, 8, 8310 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8311 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC| 8312 FE_C10} 8313 , 8314 {PCI_ID_LSI53C1010, 0xff, "1010-33", 6, 31, 7, 8, 8315 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8316 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC| 8317 FE_C10|FE_U3EN} 8318 , 8319 {PCI_ID_LSI53C1010_2, 0xff, "1010-66", 6, 31, 7, 8, 8320 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN| 8321 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_66MHZ|FE_CRC| 8322 FE_C10|FE_U3EN} 8323 , 8324 {PCI_ID_LSI53C1510D, 0xff, "1510d", 6, 31, 7, 4, 8325 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN| 8326 FE_RAM|FE_IO256|FE_LEDC} 8327 }; 8328 8329 /* 8330 * Look up the chip table. 8331 * 8332 * Return a pointer to the chip entry if found, 8333 * zero otherwise. 8334 */ 8335 static const struct sym_pci_chip * 8336 sym_find_pci_chip(device_t dev) 8337 { 8338 const struct sym_pci_chip *chip; 8339 int i; 8340 u_short device_id; 8341 u_char revision; 8342 8343 if (pci_get_vendor(dev) != PCI_VENDOR_NCR) 8344 return NULL; 8345 8346 device_id = pci_get_device(dev); 8347 revision = pci_get_revid(dev); 8348 8349 for (i = 0; i < nitems(sym_pci_dev_table); i++) { 8350 chip = &sym_pci_dev_table[i]; 8351 if (device_id != chip->device_id) 8352 continue; 8353 if (revision > chip->revision_id) 8354 continue; 8355 return chip; 8356 } 8357 8358 return NULL; 8359 } 8360 8361 /* 8362 * Tell upper layer if the chip is supported. 8363 */ 8364 static int 8365 sym_pci_probe(device_t dev) 8366 { 8367 const struct sym_pci_chip *chip; 8368 8369 chip = sym_find_pci_chip(dev); 8370 if (chip && sym_find_firmware(chip)) { 8371 device_set_desc(dev, chip->name); 8372 return BUS_PROBE_DEFAULT; 8373 } 8374 return ENXIO; 8375 } 8376 8377 /* 8378 * Attach a sym53c8xx device. 8379 */ 8380 static int 8381 sym_pci_attach(device_t dev) 8382 { 8383 const struct sym_pci_chip *chip; 8384 u_short command; 8385 u_char cachelnsz; 8386 struct sym_hcb *np = NULL; 8387 struct sym_nvram nvram; 8388 const struct sym_fw *fw = NULL; 8389 int i; 8390 bus_dma_tag_t bus_dmat; 8391 8392 bus_dmat = bus_get_dma_tag(dev); 8393 8394 /* 8395 * Only probed devices should be attached. 8396 * We just enjoy being paranoid. :) 8397 */ 8398 chip = sym_find_pci_chip(dev); 8399 if (chip == NULL || (fw = sym_find_firmware(chip)) == NULL) 8400 return (ENXIO); 8401 8402 /* 8403 * Allocate immediately the host control block, 8404 * since we are only expecting to succeed. :) 8405 * We keep track in the HCB of all the resources that 8406 * are to be released on error. 8407 */ 8408 np = __sym_calloc_dma(bus_dmat, sizeof(*np), "HCB"); 8409 if (np) 8410 np->bus_dmat = bus_dmat; 8411 else 8412 return (ENXIO); 8413 device_set_softc(dev, np); 8414 8415 SYM_LOCK_INIT(); 8416 8417 /* 8418 * Copy some useful infos to the HCB. 8419 */ 8420 np->hcb_ba = vtobus(np); 8421 np->verbose = bootverbose; 8422 np->device = dev; 8423 np->device_id = pci_get_device(dev); 8424 np->revision_id = pci_get_revid(dev); 8425 np->features = chip->features; 8426 np->clock_divn = chip->nr_divisor; 8427 np->maxoffs = chip->offset_max; 8428 np->maxburst = chip->burst_max; 8429 np->scripta_sz = fw->a_size; 8430 np->scriptb_sz = fw->b_size; 8431 np->fw_setup = fw->setup; 8432 np->fw_patch = fw->patch; 8433 np->fw_name = fw->name; 8434 8435 #ifdef __amd64__ 8436 np->target = sym_calloc_dma(SYM_CONF_MAX_TARGET * sizeof(*(np->target)), 8437 "TARGET"); 8438 if (!np->target) 8439 goto attach_failed; 8440 #endif 8441 8442 /* 8443 * Initialize the CCB free and busy queues. 8444 */ 8445 sym_que_init(&np->free_ccbq); 8446 sym_que_init(&np->busy_ccbq); 8447 sym_que_init(&np->comp_ccbq); 8448 sym_que_init(&np->cam_ccbq); 8449 8450 /* 8451 * Allocate a tag for the DMA of user data. 8452 */ 8453 if (bus_dma_tag_create(np->bus_dmat, 1, SYM_CONF_DMA_BOUNDARY, 8454 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 8455 BUS_SPACE_MAXSIZE_32BIT, SYM_CONF_MAX_SG, SYM_CONF_DMA_BOUNDARY, 8456 0, busdma_lock_mutex, &np->mtx, &np->data_dmat)) { 8457 device_printf(dev, "failed to create DMA tag.\n"); 8458 goto attach_failed; 8459 } 8460 8461 /* 8462 * Read and apply some fix-ups to the PCI COMMAND 8463 * register. We want the chip to be enabled for: 8464 * - BUS mastering 8465 * - PCI parity checking (reporting would also be fine) 8466 * - Write And Invalidate. 8467 */ 8468 command = pci_read_config(dev, PCIR_COMMAND, 2); 8469 command |= PCIM_CMD_BUSMASTEREN | PCIM_CMD_PERRESPEN | 8470 PCIM_CMD_MWRICEN; 8471 pci_write_config(dev, PCIR_COMMAND, command, 2); 8472 8473 /* 8474 * Let the device know about the cache line size, 8475 * if it doesn't yet. 8476 */ 8477 cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 8478 if (!cachelnsz) { 8479 cachelnsz = 8; 8480 pci_write_config(dev, PCIR_CACHELNSZ, cachelnsz, 1); 8481 } 8482 8483 /* 8484 * Alloc/get/map/retrieve everything that deals with MMIO. 8485 */ 8486 i = SYM_PCI_MMIO; 8487 np->mmio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i, 8488 RF_ACTIVE); 8489 if (!np->mmio_res) { 8490 device_printf(dev, "failed to allocate MMIO resources\n"); 8491 goto attach_failed; 8492 } 8493 np->mmio_ba = rman_get_start(np->mmio_res); 8494 8495 /* 8496 * Allocate the IRQ. 8497 */ 8498 i = 0; 8499 np->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i, 8500 RF_ACTIVE | RF_SHAREABLE); 8501 if (!np->irq_res) { 8502 device_printf(dev, "failed to allocate IRQ resource\n"); 8503 goto attach_failed; 8504 } 8505 8506 #ifdef SYM_CONF_IOMAPPED 8507 /* 8508 * User want us to use normal IO with PCI. 8509 * Alloc/get/map/retrieve everything that deals with IO. 8510 */ 8511 i = SYM_PCI_IO; 8512 np->io_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &i, RF_ACTIVE); 8513 if (!np->io_res) { 8514 device_printf(dev, "failed to allocate IO resources\n"); 8515 goto attach_failed; 8516 } 8517 8518 #endif /* SYM_CONF_IOMAPPED */ 8519 8520 /* 8521 * If the chip has RAM. 8522 * Alloc/get/map/retrieve the corresponding resources. 8523 */ 8524 if (np->features & (FE_RAM|FE_RAM8K)) { 8525 int regs_id = SYM_PCI_RAM; 8526 if (np->features & FE_64BIT) 8527 regs_id = SYM_PCI_RAM64; 8528 np->ram_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 8529 ®s_id, RF_ACTIVE); 8530 if (!np->ram_res) { 8531 device_printf(dev,"failed to allocate RAM resources\n"); 8532 goto attach_failed; 8533 } 8534 np->ram_id = regs_id; 8535 np->ram_ba = rman_get_start(np->ram_res); 8536 } 8537 8538 /* 8539 * Save setting of some IO registers, so we will 8540 * be able to probe specific implementations. 8541 */ 8542 sym_save_initial_setting (np); 8543 8544 /* 8545 * Reset the chip now, since it has been reported 8546 * that SCSI clock calibration may not work properly 8547 * if the chip is currently active. 8548 */ 8549 sym_chip_reset (np); 8550 8551 /* 8552 * Try to read the user set-up. 8553 */ 8554 (void) sym_read_nvram(np, &nvram); 8555 8556 /* 8557 * Prepare controller and devices settings, according 8558 * to chip features, user set-up and driver set-up. 8559 */ 8560 (void) sym_prepare_setting(np, &nvram); 8561 8562 /* 8563 * Check the PCI clock frequency. 8564 * Must be performed after prepare_setting since it destroys 8565 * STEST1 that is used to probe for the clock doubler. 8566 */ 8567 i = sym_getpciclock(np); 8568 if (i > 37000) 8569 device_printf(dev, "PCI BUS clock seems too high: %u KHz.\n",i); 8570 8571 /* 8572 * Allocate the start queue. 8573 */ 8574 np->squeue = (u32 *) sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"SQUEUE"); 8575 if (!np->squeue) 8576 goto attach_failed; 8577 np->squeue_ba = vtobus(np->squeue); 8578 8579 /* 8580 * Allocate the done queue. 8581 */ 8582 np->dqueue = (u32 *) sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"DQUEUE"); 8583 if (!np->dqueue) 8584 goto attach_failed; 8585 np->dqueue_ba = vtobus(np->dqueue); 8586 8587 /* 8588 * Allocate the target bus address array. 8589 */ 8590 np->targtbl = (u32 *) sym_calloc_dma(256, "TARGTBL"); 8591 if (!np->targtbl) 8592 goto attach_failed; 8593 np->targtbl_ba = vtobus(np->targtbl); 8594 8595 /* 8596 * Allocate SCRIPTS areas. 8597 */ 8598 np->scripta0 = sym_calloc_dma(np->scripta_sz, "SCRIPTA0"); 8599 np->scriptb0 = sym_calloc_dma(np->scriptb_sz, "SCRIPTB0"); 8600 if (!np->scripta0 || !np->scriptb0) 8601 goto attach_failed; 8602 8603 /* 8604 * Allocate the CCBs. We need at least ONE. 8605 */ 8606 for (i = 0; sym_alloc_ccb(np) != NULL; i++) 8607 ; 8608 if (i < 1) 8609 goto attach_failed; 8610 8611 /* 8612 * Calculate BUS addresses where we are going 8613 * to load the SCRIPTS. 8614 */ 8615 np->scripta_ba = vtobus(np->scripta0); 8616 np->scriptb_ba = vtobus(np->scriptb0); 8617 np->scriptb0_ba = np->scriptb_ba; 8618 8619 if (np->ram_ba) { 8620 np->scripta_ba = np->ram_ba; 8621 if (np->features & FE_RAM8K) { 8622 np->ram_ws = 8192; 8623 np->scriptb_ba = np->scripta_ba + 4096; 8624 #ifdef __LP64__ 8625 np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32); 8626 #endif 8627 } 8628 else 8629 np->ram_ws = 4096; 8630 } 8631 8632 /* 8633 * Copy scripts to controller instance. 8634 */ 8635 bcopy(fw->a_base, np->scripta0, np->scripta_sz); 8636 bcopy(fw->b_base, np->scriptb0, np->scriptb_sz); 8637 8638 /* 8639 * Setup variable parts in scripts and compute 8640 * scripts bus addresses used from the C code. 8641 */ 8642 np->fw_setup(np, fw); 8643 8644 /* 8645 * Bind SCRIPTS with physical addresses usable by the 8646 * SCRIPTS processor (as seen from the BUS = BUS addresses). 8647 */ 8648 sym_fw_bind_script(np, (u32 *) np->scripta0, np->scripta_sz); 8649 sym_fw_bind_script(np, (u32 *) np->scriptb0, np->scriptb_sz); 8650 8651 #ifdef SYM_CONF_IARB_SUPPORT 8652 /* 8653 * If user wants IARB to be set when we win arbitration 8654 * and have other jobs, compute the max number of consecutive 8655 * settings of IARB hints before we leave devices a chance to 8656 * arbitrate for reselection. 8657 */ 8658 #ifdef SYM_SETUP_IARB_MAX 8659 np->iarb_max = SYM_SETUP_IARB_MAX; 8660 #else 8661 np->iarb_max = 4; 8662 #endif 8663 #endif 8664 8665 /* 8666 * Prepare the idle and invalid task actions. 8667 */ 8668 np->idletask.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8669 np->idletask.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8670 np->idletask_ba = vtobus(&np->idletask); 8671 8672 np->notask.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8673 np->notask.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8674 np->notask_ba = vtobus(&np->notask); 8675 8676 np->bad_itl.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8677 np->bad_itl.restart = cpu_to_scr(SCRIPTB_BA (np, bad_i_t_l)); 8678 np->bad_itl_ba = vtobus(&np->bad_itl); 8679 8680 np->bad_itlq.start = cpu_to_scr(SCRIPTA_BA (np, idle)); 8681 np->bad_itlq.restart = cpu_to_scr(SCRIPTB_BA (np,bad_i_t_l_q)); 8682 np->bad_itlq_ba = vtobus(&np->bad_itlq); 8683 8684 /* 8685 * Allocate and prepare the lun JUMP table that is used 8686 * for a target prior the probing of devices (bad lun table). 8687 * A private table will be allocated for the target on the 8688 * first INQUIRY response received. 8689 */ 8690 np->badluntbl = sym_calloc_dma(256, "BADLUNTBL"); 8691 if (!np->badluntbl) 8692 goto attach_failed; 8693 8694 np->badlun_sa = cpu_to_scr(SCRIPTB_BA (np, resel_bad_lun)); 8695 for (i = 0 ; i < 64 ; i++) /* 64 luns/target, no less */ 8696 np->badluntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa)); 8697 8698 /* 8699 * Prepare the bus address array that contains the bus 8700 * address of each target control block. 8701 * For now, assume all logical units are wrong. :) 8702 */ 8703 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { 8704 np->targtbl[i] = cpu_to_scr(vtobus(&np->target[i])); 8705 np->target[i].head.luntbl_sa = 8706 cpu_to_scr(vtobus(np->badluntbl)); 8707 np->target[i].head.lun0_sa = 8708 cpu_to_scr(vtobus(&np->badlun_sa)); 8709 } 8710 8711 /* 8712 * Now check the cache handling of the pci chipset. 8713 */ 8714 if (sym_snooptest (np)) { 8715 device_printf(dev, "CACHE INCORRECTLY CONFIGURED.\n"); 8716 goto attach_failed; 8717 } 8718 8719 /* 8720 * Now deal with CAM. 8721 * Hopefully, we will succeed with that one.:) 8722 */ 8723 if (!sym_cam_attach(np)) 8724 goto attach_failed; 8725 8726 /* 8727 * Sigh! we are done. 8728 */ 8729 return 0; 8730 8731 /* 8732 * We have failed. 8733 * We will try to free all the resources we have 8734 * allocated, but if we are a boot device, this 8735 * will not help that much.;) 8736 */ 8737 attach_failed: 8738 if (np) 8739 sym_pci_free(np); 8740 return ENXIO; 8741 } 8742 8743 /* 8744 * Free everything that have been allocated for this device. 8745 */ 8746 static void sym_pci_free(hcb_p np) 8747 { 8748 SYM_QUEHEAD *qp; 8749 ccb_p cp; 8750 tcb_p tp; 8751 lcb_p lp; 8752 int target, lun; 8753 8754 /* 8755 * First free CAM resources. 8756 */ 8757 sym_cam_free(np); 8758 8759 /* 8760 * Now every should be quiet for us to 8761 * free other resources. 8762 */ 8763 if (np->ram_res) 8764 bus_release_resource(np->device, SYS_RES_MEMORY, 8765 np->ram_id, np->ram_res); 8766 if (np->mmio_res) 8767 bus_release_resource(np->device, SYS_RES_MEMORY, 8768 SYM_PCI_MMIO, np->mmio_res); 8769 if (np->io_res) 8770 bus_release_resource(np->device, SYS_RES_IOPORT, 8771 SYM_PCI_IO, np->io_res); 8772 if (np->irq_res) 8773 bus_release_resource(np->device, SYS_RES_IRQ, 8774 0, np->irq_res); 8775 8776 if (np->scriptb0) 8777 sym_mfree_dma(np->scriptb0, np->scriptb_sz, "SCRIPTB0"); 8778 if (np->scripta0) 8779 sym_mfree_dma(np->scripta0, np->scripta_sz, "SCRIPTA0"); 8780 if (np->squeue) 8781 sym_mfree_dma(np->squeue, sizeof(u32)*(MAX_QUEUE*2), "SQUEUE"); 8782 if (np->dqueue) 8783 sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE"); 8784 8785 while ((qp = sym_remque_head(&np->free_ccbq)) != NULL) { 8786 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); 8787 bus_dmamap_destroy(np->data_dmat, cp->dmamap); 8788 sym_mfree_dma(cp->sns_bbuf, SYM_SNS_BBUF_LEN, "SNS_BBUF"); 8789 sym_mfree_dma(cp, sizeof(*cp), "CCB"); 8790 } 8791 8792 if (np->badluntbl) 8793 sym_mfree_dma(np->badluntbl, 256,"BADLUNTBL"); 8794 8795 for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) { 8796 tp = &np->target[target]; 8797 for (lun = 0 ; lun < SYM_CONF_MAX_LUN ; lun++) { 8798 lp = sym_lp(tp, lun); 8799 if (!lp) 8800 continue; 8801 if (lp->itlq_tbl) 8802 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, 8803 "ITLQ_TBL"); 8804 if (lp->cb_tags) 8805 sym_mfree(lp->cb_tags, SYM_CONF_MAX_TASK, 8806 "CB_TAGS"); 8807 sym_mfree_dma(lp, sizeof(*lp), "LCB"); 8808 } 8809 #if SYM_CONF_MAX_LUN > 1 8810 if (tp->lunmp) 8811 sym_mfree(tp->lunmp, SYM_CONF_MAX_LUN*sizeof(lcb_p), 8812 "LUNMP"); 8813 #endif 8814 } 8815 #ifdef __amd64__ 8816 if (np->target) 8817 sym_mfree_dma(np->target, 8818 SYM_CONF_MAX_TARGET * sizeof(*(np->target)), "TARGET"); 8819 #endif 8820 if (np->targtbl) 8821 sym_mfree_dma(np->targtbl, 256, "TARGTBL"); 8822 if (np->data_dmat) 8823 bus_dma_tag_destroy(np->data_dmat); 8824 if (SYM_LOCK_INITIALIZED() != 0) 8825 SYM_LOCK_DESTROY(); 8826 device_set_softc(np->device, NULL); 8827 sym_mfree_dma(np, sizeof(*np), "HCB"); 8828 } 8829 8830 /* 8831 * Allocate CAM resources and register a bus to CAM. 8832 */ 8833 static int sym_cam_attach(hcb_p np) 8834 { 8835 struct cam_devq *devq = NULL; 8836 struct cam_sim *sim = NULL; 8837 struct cam_path *path = NULL; 8838 int err; 8839 8840 /* 8841 * Establish our interrupt handler. 8842 */ 8843 err = bus_setup_intr(np->device, np->irq_res, 8844 INTR_ENTROPY | INTR_MPSAFE | INTR_TYPE_CAM, 8845 NULL, sym_intr, np, &np->intr); 8846 if (err) { 8847 device_printf(np->device, "bus_setup_intr() failed: %d\n", 8848 err); 8849 goto fail; 8850 } 8851 8852 /* 8853 * Create the device queue for our sym SIM. 8854 */ 8855 devq = cam_simq_alloc(SYM_CONF_MAX_START); 8856 if (!devq) 8857 goto fail; 8858 8859 /* 8860 * Construct our SIM entry. 8861 */ 8862 sim = cam_sim_alloc(sym_action, sym_poll, "sym", np, 8863 device_get_unit(np->device), 8864 &np->mtx, 1, SYM_SETUP_MAX_TAG, devq); 8865 if (!sim) 8866 goto fail; 8867 8868 SYM_LOCK(); 8869 8870 if (xpt_bus_register(sim, np->device, 0) != CAM_SUCCESS) 8871 goto fail; 8872 np->sim = sim; 8873 sim = NULL; 8874 8875 if (xpt_create_path(&path, NULL, 8876 cam_sim_path(np->sim), CAM_TARGET_WILDCARD, 8877 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 8878 goto fail; 8879 } 8880 np->path = path; 8881 8882 /* 8883 * Establish our async notification handler. 8884 */ 8885 if (xpt_register_async(AC_LOST_DEVICE, sym_async, np->sim, path) != 8886 CAM_REQ_CMP) 8887 goto fail; 8888 8889 /* 8890 * Start the chip now, without resetting the BUS, since 8891 * it seems that this must stay under control of CAM. 8892 * With LVD/SE capable chips and BUS in SE mode, we may 8893 * get a spurious SMBC interrupt. 8894 */ 8895 sym_init (np, 0); 8896 8897 SYM_UNLOCK(); 8898 8899 return 1; 8900 fail: 8901 if (sim) 8902 cam_sim_free(sim, FALSE); 8903 if (devq) 8904 cam_simq_free(devq); 8905 8906 SYM_UNLOCK(); 8907 8908 sym_cam_free(np); 8909 8910 return 0; 8911 } 8912 8913 /* 8914 * Free everything that deals with CAM. 8915 */ 8916 static void sym_cam_free(hcb_p np) 8917 { 8918 8919 SYM_LOCK_ASSERT(MA_NOTOWNED); 8920 8921 if (np->intr) { 8922 bus_teardown_intr(np->device, np->irq_res, np->intr); 8923 np->intr = NULL; 8924 } 8925 8926 SYM_LOCK(); 8927 8928 if (np->sim) { 8929 xpt_bus_deregister(cam_sim_path(np->sim)); 8930 cam_sim_free(np->sim, /*free_devq*/ TRUE); 8931 np->sim = NULL; 8932 } 8933 if (np->path) { 8934 xpt_free_path(np->path); 8935 np->path = NULL; 8936 } 8937 8938 SYM_UNLOCK(); 8939 } 8940 8941 /*============ OPTIONNAL NVRAM SUPPORT =================*/ 8942 8943 /* 8944 * Get host setup from NVRAM. 8945 */ 8946 static void sym_nvram_setup_host (hcb_p np, struct sym_nvram *nvram) 8947 { 8948 #ifdef SYM_CONF_NVRAM_SUPPORT 8949 /* 8950 * Get parity checking, host ID, verbose mode 8951 * and miscellaneous host flags from NVRAM. 8952 */ 8953 switch(nvram->type) { 8954 case SYM_SYMBIOS_NVRAM: 8955 if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE)) 8956 np->rv_scntl0 &= ~0x0a; 8957 np->myaddr = nvram->data.Symbios.host_id & 0x0f; 8958 if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS) 8959 np->verbose += 1; 8960 if (nvram->data.Symbios.flags1 & SYMBIOS_SCAN_HI_LO) 8961 np->usrflags |= SYM_SCAN_TARGETS_HILO; 8962 if (nvram->data.Symbios.flags2 & SYMBIOS_AVOID_BUS_RESET) 8963 np->usrflags |= SYM_AVOID_BUS_RESET; 8964 break; 8965 case SYM_TEKRAM_NVRAM: 8966 np->myaddr = nvram->data.Tekram.host_id & 0x0f; 8967 break; 8968 default: 8969 break; 8970 } 8971 #endif 8972 } 8973 8974 /* 8975 * Get target setup from NVRAM. 8976 */ 8977 #ifdef SYM_CONF_NVRAM_SUPPORT 8978 static void sym_Symbios_setup_target(hcb_p np,int target, Symbios_nvram *nvram); 8979 static void sym_Tekram_setup_target(hcb_p np,int target, Tekram_nvram *nvram); 8980 #endif 8981 8982 static void 8983 sym_nvram_setup_target (hcb_p np, int target, struct sym_nvram *nvp) 8984 { 8985 #ifdef SYM_CONF_NVRAM_SUPPORT 8986 switch(nvp->type) { 8987 case SYM_SYMBIOS_NVRAM: 8988 sym_Symbios_setup_target (np, target, &nvp->data.Symbios); 8989 break; 8990 case SYM_TEKRAM_NVRAM: 8991 sym_Tekram_setup_target (np, target, &nvp->data.Tekram); 8992 break; 8993 default: 8994 break; 8995 } 8996 #endif 8997 } 8998 8999 #ifdef SYM_CONF_NVRAM_SUPPORT 9000 /* 9001 * Get target set-up from Symbios format NVRAM. 9002 */ 9003 static void 9004 sym_Symbios_setup_target(hcb_p np, int target, Symbios_nvram *nvram) 9005 { 9006 tcb_p tp = &np->target[target]; 9007 Symbios_target *tn = &nvram->target[target]; 9008 9009 tp->tinfo.user.period = tn->sync_period ? (tn->sync_period + 3) / 4 : 0; 9010 tp->tinfo.user.width = tn->bus_width == 0x10 ? BUS_16_BIT : BUS_8_BIT; 9011 tp->usrtags = 9012 (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? SYM_SETUP_MAX_TAG : 0; 9013 9014 if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE)) 9015 tp->usrflags &= ~SYM_DISC_ENABLED; 9016 if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME)) 9017 tp->usrflags |= SYM_SCAN_BOOT_DISABLED; 9018 if (!(tn->flags & SYMBIOS_SCAN_LUNS)) 9019 tp->usrflags |= SYM_SCAN_LUNS_DISABLED; 9020 } 9021 9022 /* 9023 * Get target set-up from Tekram format NVRAM. 9024 */ 9025 static void 9026 sym_Tekram_setup_target(hcb_p np, int target, Tekram_nvram *nvram) 9027 { 9028 tcb_p tp = &np->target[target]; 9029 struct Tekram_target *tn = &nvram->target[target]; 9030 int i; 9031 9032 if (tn->flags & TEKRAM_SYNC_NEGO) { 9033 i = tn->sync_index & 0xf; 9034 tp->tinfo.user.period = Tekram_sync[i]; 9035 } 9036 9037 tp->tinfo.user.width = 9038 (tn->flags & TEKRAM_WIDE_NEGO) ? BUS_16_BIT : BUS_8_BIT; 9039 9040 if (tn->flags & TEKRAM_TAGGED_COMMANDS) { 9041 tp->usrtags = 2 << nvram->max_tags_index; 9042 } 9043 9044 if (tn->flags & TEKRAM_DISCONNECT_ENABLE) 9045 tp->usrflags |= SYM_DISC_ENABLED; 9046 9047 /* If any device does not support parity, we will not use this option */ 9048 if (!(tn->flags & TEKRAM_PARITY_CHECK)) 9049 np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */ 9050 } 9051 9052 #ifdef SYM_CONF_DEBUG_NVRAM 9053 /* 9054 * Dump Symbios format NVRAM for debugging purpose. 9055 */ 9056 static void sym_display_Symbios_nvram(hcb_p np, Symbios_nvram *nvram) 9057 { 9058 int i; 9059 9060 /* display Symbios nvram host data */ 9061 printf("%s: HOST ID=%d%s%s%s%s%s%s\n", 9062 sym_name(np), nvram->host_id & 0x0f, 9063 (nvram->flags & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", 9064 (nvram->flags & SYMBIOS_PARITY_ENABLE) ? " PARITY" :"", 9065 (nvram->flags & SYMBIOS_VERBOSE_MSGS) ? " VERBOSE" :"", 9066 (nvram->flags & SYMBIOS_CHS_MAPPING) ? " CHS_ALT" :"", 9067 (nvram->flags2 & SYMBIOS_AVOID_BUS_RESET)?" NO_RESET" :"", 9068 (nvram->flags1 & SYMBIOS_SCAN_HI_LO) ? " HI_LO" :""); 9069 9070 /* display Symbios nvram drive data */ 9071 for (i = 0 ; i < 15 ; i++) { 9072 struct Symbios_target *tn = &nvram->target[i]; 9073 printf("%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n", 9074 sym_name(np), i, 9075 (tn->flags & SYMBIOS_DISCONNECT_ENABLE) ? " DISC" : "", 9076 (tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME) ? " SCAN_BOOT" : "", 9077 (tn->flags & SYMBIOS_SCAN_LUNS) ? " SCAN_LUNS" : "", 9078 (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? " TCQ" : "", 9079 tn->bus_width, 9080 tn->sync_period / 4, 9081 tn->timeout); 9082 } 9083 } 9084 9085 /* 9086 * Dump TEKRAM format NVRAM for debugging purpose. 9087 */ 9088 static const u_char Tekram_boot_delay[7] = {3, 5, 10, 20, 30, 60, 120}; 9089 static void sym_display_Tekram_nvram(hcb_p np, Tekram_nvram *nvram) 9090 { 9091 int i, tags, boot_delay; 9092 char *rem; 9093 9094 /* display Tekram nvram host data */ 9095 tags = 2 << nvram->max_tags_index; 9096 boot_delay = 0; 9097 if (nvram->boot_delay_index < 6) 9098 boot_delay = Tekram_boot_delay[nvram->boot_delay_index]; 9099 switch((nvram->flags & TEKRAM_REMOVABLE_FLAGS) >> 6) { 9100 default: 9101 case 0: rem = ""; break; 9102 case 1: rem = " REMOVABLE=boot device"; break; 9103 case 2: rem = " REMOVABLE=all"; break; 9104 } 9105 9106 printf("%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n", 9107 sym_name(np), nvram->host_id & 0x0f, 9108 (nvram->flags1 & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", 9109 (nvram->flags & TEKRAM_MORE_THAN_2_DRIVES) ? " >2DRIVES" :"", 9110 (nvram->flags & TEKRAM_DRIVES_SUP_1GB) ? " >1GB" :"", 9111 (nvram->flags & TEKRAM_RESET_ON_POWER_ON) ? " RESET" :"", 9112 (nvram->flags & TEKRAM_ACTIVE_NEGATION) ? " ACT_NEG" :"", 9113 (nvram->flags & TEKRAM_IMMEDIATE_SEEK) ? " IMM_SEEK" :"", 9114 (nvram->flags & TEKRAM_SCAN_LUNS) ? " SCAN_LUNS" :"", 9115 (nvram->flags1 & TEKRAM_F2_F6_ENABLED) ? " F2_F6" :"", 9116 rem, boot_delay, tags); 9117 9118 /* display Tekram nvram drive data */ 9119 for (i = 0; i <= 15; i++) { 9120 int sync, j; 9121 struct Tekram_target *tn = &nvram->target[i]; 9122 j = tn->sync_index & 0xf; 9123 sync = Tekram_sync[j]; 9124 printf("%s-%d:%s%s%s%s%s%s PERIOD=%d\n", 9125 sym_name(np), i, 9126 (tn->flags & TEKRAM_PARITY_CHECK) ? " PARITY" : "", 9127 (tn->flags & TEKRAM_SYNC_NEGO) ? " SYNC" : "", 9128 (tn->flags & TEKRAM_DISCONNECT_ENABLE) ? " DISC" : "", 9129 (tn->flags & TEKRAM_START_CMD) ? " START" : "", 9130 (tn->flags & TEKRAM_TAGGED_COMMANDS) ? " TCQ" : "", 9131 (tn->flags & TEKRAM_WIDE_NEGO) ? " WIDE" : "", 9132 sync); 9133 } 9134 } 9135 #endif /* SYM_CONF_DEBUG_NVRAM */ 9136 #endif /* SYM_CONF_NVRAM_SUPPORT */ 9137 9138 /* 9139 * Try reading Symbios or Tekram NVRAM 9140 */ 9141 #ifdef SYM_CONF_NVRAM_SUPPORT 9142 static int sym_read_Symbios_nvram (hcb_p np, Symbios_nvram *nvram); 9143 static int sym_read_Tekram_nvram (hcb_p np, Tekram_nvram *nvram); 9144 #endif 9145 9146 static int sym_read_nvram(hcb_p np, struct sym_nvram *nvp) 9147 { 9148 #ifdef SYM_CONF_NVRAM_SUPPORT 9149 /* 9150 * Try to read SYMBIOS nvram. 9151 * Try to read TEKRAM nvram if Symbios nvram not found. 9152 */ 9153 if (SYM_SETUP_SYMBIOS_NVRAM && 9154 !sym_read_Symbios_nvram (np, &nvp->data.Symbios)) { 9155 nvp->type = SYM_SYMBIOS_NVRAM; 9156 #ifdef SYM_CONF_DEBUG_NVRAM 9157 sym_display_Symbios_nvram(np, &nvp->data.Symbios); 9158 #endif 9159 } 9160 else if (SYM_SETUP_TEKRAM_NVRAM && 9161 !sym_read_Tekram_nvram (np, &nvp->data.Tekram)) { 9162 nvp->type = SYM_TEKRAM_NVRAM; 9163 #ifdef SYM_CONF_DEBUG_NVRAM 9164 sym_display_Tekram_nvram(np, &nvp->data.Tekram); 9165 #endif 9166 } 9167 else 9168 nvp->type = 0; 9169 #else 9170 nvp->type = 0; 9171 #endif 9172 return nvp->type; 9173 } 9174 9175 #ifdef SYM_CONF_NVRAM_SUPPORT 9176 /* 9177 * 24C16 EEPROM reading. 9178 * 9179 * GPOI0 - data in/data out 9180 * GPIO1 - clock 9181 * Symbios NVRAM wiring now also used by Tekram. 9182 */ 9183 9184 #define SET_BIT 0 9185 #define CLR_BIT 1 9186 #define SET_CLK 2 9187 #define CLR_CLK 3 9188 9189 /* 9190 * Set/clear data/clock bit in GPIO0 9191 */ 9192 static void S24C16_set_bit(hcb_p np, u_char write_bit, u_char *gpreg, 9193 int bit_mode) 9194 { 9195 UDELAY (5); 9196 switch (bit_mode){ 9197 case SET_BIT: 9198 *gpreg |= write_bit; 9199 break; 9200 case CLR_BIT: 9201 *gpreg &= 0xfe; 9202 break; 9203 case SET_CLK: 9204 *gpreg |= 0x02; 9205 break; 9206 case CLR_CLK: 9207 *gpreg &= 0xfd; 9208 break; 9209 } 9210 OUTB (nc_gpreg, *gpreg); 9211 UDELAY (5); 9212 } 9213 9214 /* 9215 * Send START condition to NVRAM to wake it up. 9216 */ 9217 static void S24C16_start(hcb_p np, u_char *gpreg) 9218 { 9219 S24C16_set_bit(np, 1, gpreg, SET_BIT); 9220 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9221 S24C16_set_bit(np, 0, gpreg, CLR_BIT); 9222 S24C16_set_bit(np, 0, gpreg, CLR_CLK); 9223 } 9224 9225 /* 9226 * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!! 9227 */ 9228 static void S24C16_stop(hcb_p np, u_char *gpreg) 9229 { 9230 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9231 S24C16_set_bit(np, 1, gpreg, SET_BIT); 9232 } 9233 9234 /* 9235 * Read or write a bit to the NVRAM, 9236 * read if GPIO0 input else write if GPIO0 output 9237 */ 9238 static void S24C16_do_bit(hcb_p np, u_char *read_bit, u_char write_bit, 9239 u_char *gpreg) 9240 { 9241 S24C16_set_bit(np, write_bit, gpreg, SET_BIT); 9242 S24C16_set_bit(np, 0, gpreg, SET_CLK); 9243 if (read_bit) 9244 *read_bit = INB (nc_gpreg); 9245 S24C16_set_bit(np, 0, gpreg, CLR_CLK); 9246 S24C16_set_bit(np, 0, gpreg, CLR_BIT); 9247 } 9248 9249 /* 9250 * Output an ACK to the NVRAM after reading, 9251 * change GPIO0 to output and when done back to an input 9252 */ 9253 static void S24C16_write_ack(hcb_p np, u_char write_bit, u_char *gpreg, 9254 u_char *gpcntl) 9255 { 9256 OUTB (nc_gpcntl, *gpcntl & 0xfe); 9257 S24C16_do_bit(np, 0, write_bit, gpreg); 9258 OUTB (nc_gpcntl, *gpcntl); 9259 } 9260 9261 /* 9262 * Input an ACK from NVRAM after writing, 9263 * change GPIO0 to input and when done back to an output 9264 */ 9265 static void S24C16_read_ack(hcb_p np, u_char *read_bit, u_char *gpreg, 9266 u_char *gpcntl) 9267 { 9268 OUTB (nc_gpcntl, *gpcntl | 0x01); 9269 S24C16_do_bit(np, read_bit, 1, gpreg); 9270 OUTB (nc_gpcntl, *gpcntl); 9271 } 9272 9273 /* 9274 * WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK, 9275 * GPIO0 must already be set as an output 9276 */ 9277 static void S24C16_write_byte(hcb_p np, u_char *ack_data, u_char write_data, 9278 u_char *gpreg, u_char *gpcntl) 9279 { 9280 int x; 9281 9282 for (x = 0; x < 8; x++) 9283 S24C16_do_bit(np, 0, (write_data >> (7 - x)) & 0x01, gpreg); 9284 9285 S24C16_read_ack(np, ack_data, gpreg, gpcntl); 9286 } 9287 9288 /* 9289 * READ a byte from the NVRAM and then send an ACK to say we have got it, 9290 * GPIO0 must already be set as an input 9291 */ 9292 static void S24C16_read_byte(hcb_p np, u_char *read_data, u_char ack_data, 9293 u_char *gpreg, u_char *gpcntl) 9294 { 9295 int x; 9296 u_char read_bit; 9297 9298 *read_data = 0; 9299 for (x = 0; x < 8; x++) { 9300 S24C16_do_bit(np, &read_bit, 1, gpreg); 9301 *read_data |= ((read_bit & 0x01) << (7 - x)); 9302 } 9303 9304 S24C16_write_ack(np, ack_data, gpreg, gpcntl); 9305 } 9306 9307 /* 9308 * Read 'len' bytes starting at 'offset'. 9309 */ 9310 static int sym_read_S24C16_nvram (hcb_p np, int offset, u_char *data, int len) 9311 { 9312 u_char gpcntl, gpreg; 9313 u_char old_gpcntl, old_gpreg; 9314 u_char ack_data; 9315 int retv = 1; 9316 int x; 9317 9318 /* save current state of GPCNTL and GPREG */ 9319 old_gpreg = INB (nc_gpreg); 9320 old_gpcntl = INB (nc_gpcntl); 9321 gpcntl = old_gpcntl & 0x1c; 9322 9323 /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ 9324 OUTB (nc_gpreg, old_gpreg); 9325 OUTB (nc_gpcntl, gpcntl); 9326 9327 /* this is to set NVRAM into a known state with GPIO0/1 both low */ 9328 gpreg = old_gpreg; 9329 S24C16_set_bit(np, 0, &gpreg, CLR_CLK); 9330 S24C16_set_bit(np, 0, &gpreg, CLR_BIT); 9331 9332 /* now set NVRAM inactive with GPIO0/1 both high */ 9333 S24C16_stop(np, &gpreg); 9334 9335 /* activate NVRAM */ 9336 S24C16_start(np, &gpreg); 9337 9338 /* write device code and random address MSB */ 9339 S24C16_write_byte(np, &ack_data, 9340 0xa0 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); 9341 if (ack_data & 0x01) 9342 goto out; 9343 9344 /* write random address LSB */ 9345 S24C16_write_byte(np, &ack_data, 9346 offset & 0xff, &gpreg, &gpcntl); 9347 if (ack_data & 0x01) 9348 goto out; 9349 9350 /* regenerate START state to set up for reading */ 9351 S24C16_start(np, &gpreg); 9352 9353 /* rewrite device code and address MSB with read bit set (lsb = 0x01) */ 9354 S24C16_write_byte(np, &ack_data, 9355 0xa1 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); 9356 if (ack_data & 0x01) 9357 goto out; 9358 9359 /* now set up GPIO0 for inputting data */ 9360 gpcntl |= 0x01; 9361 OUTB (nc_gpcntl, gpcntl); 9362 9363 /* input all requested data - only part of total NVRAM */ 9364 for (x = 0; x < len; x++) 9365 S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl); 9366 9367 /* finally put NVRAM back in inactive mode */ 9368 gpcntl &= 0xfe; 9369 OUTB (nc_gpcntl, gpcntl); 9370 S24C16_stop(np, &gpreg); 9371 retv = 0; 9372 out: 9373 /* return GPIO0/1 to original states after having accessed NVRAM */ 9374 OUTB (nc_gpcntl, old_gpcntl); 9375 OUTB (nc_gpreg, old_gpreg); 9376 9377 return retv; 9378 } 9379 9380 #undef SET_BIT /* 0 */ 9381 #undef CLR_BIT /* 1 */ 9382 #undef SET_CLK /* 2 */ 9383 #undef CLR_CLK /* 3 */ 9384 9385 /* 9386 * Try reading Symbios NVRAM. 9387 * Return 0 if OK. 9388 */ 9389 static int sym_read_Symbios_nvram (hcb_p np, Symbios_nvram *nvram) 9390 { 9391 static u_char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0}; 9392 u_char *data = (u_char *) nvram; 9393 int len = sizeof(*nvram); 9394 u_short csum; 9395 int x; 9396 9397 /* probe the 24c16 and read the SYMBIOS 24c16 area */ 9398 if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS, data, len)) 9399 return 1; 9400 9401 /* check valid NVRAM signature, verify byte count and checksum */ 9402 if (nvram->type != 0 || 9403 bcmp(nvram->trailer, Symbios_trailer, 6) || 9404 nvram->byte_count != len - 12) 9405 return 1; 9406 9407 /* verify checksum */ 9408 for (x = 6, csum = 0; x < len - 6; x++) 9409 csum += data[x]; 9410 if (csum != nvram->checksum) 9411 return 1; 9412 9413 return 0; 9414 } 9415 9416 /* 9417 * 93C46 EEPROM reading. 9418 * 9419 * GPOI0 - data in 9420 * GPIO1 - data out 9421 * GPIO2 - clock 9422 * GPIO4 - chip select 9423 * 9424 * Used by Tekram. 9425 */ 9426 9427 /* 9428 * Pulse clock bit in GPIO0 9429 */ 9430 static void T93C46_Clk(hcb_p np, u_char *gpreg) 9431 { 9432 OUTB (nc_gpreg, *gpreg | 0x04); 9433 UDELAY (2); 9434 OUTB (nc_gpreg, *gpreg); 9435 } 9436 9437 /* 9438 * Read bit from NVRAM 9439 */ 9440 static void T93C46_Read_Bit(hcb_p np, u_char *read_bit, u_char *gpreg) 9441 { 9442 UDELAY (2); 9443 T93C46_Clk(np, gpreg); 9444 *read_bit = INB (nc_gpreg); 9445 } 9446 9447 /* 9448 * Write bit to GPIO0 9449 */ 9450 static void T93C46_Write_Bit(hcb_p np, u_char write_bit, u_char *gpreg) 9451 { 9452 if (write_bit & 0x01) 9453 *gpreg |= 0x02; 9454 else 9455 *gpreg &= 0xfd; 9456 9457 *gpreg |= 0x10; 9458 9459 OUTB (nc_gpreg, *gpreg); 9460 UDELAY (2); 9461 9462 T93C46_Clk(np, gpreg); 9463 } 9464 9465 /* 9466 * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!! 9467 */ 9468 static void T93C46_Stop(hcb_p np, u_char *gpreg) 9469 { 9470 *gpreg &= 0xef; 9471 OUTB (nc_gpreg, *gpreg); 9472 UDELAY (2); 9473 9474 T93C46_Clk(np, gpreg); 9475 } 9476 9477 /* 9478 * Send read command and address to NVRAM 9479 */ 9480 static void T93C46_Send_Command(hcb_p np, u_short write_data, 9481 u_char *read_bit, u_char *gpreg) 9482 { 9483 int x; 9484 9485 /* send 9 bits, start bit (1), command (2), address (6) */ 9486 for (x = 0; x < 9; x++) 9487 T93C46_Write_Bit(np, (u_char) (write_data >> (8 - x)), gpreg); 9488 9489 *read_bit = INB (nc_gpreg); 9490 } 9491 9492 /* 9493 * READ 2 bytes from the NVRAM 9494 */ 9495 static void T93C46_Read_Word(hcb_p np, u_short *nvram_data, u_char *gpreg) 9496 { 9497 int x; 9498 u_char read_bit; 9499 9500 *nvram_data = 0; 9501 for (x = 0; x < 16; x++) { 9502 T93C46_Read_Bit(np, &read_bit, gpreg); 9503 9504 if (read_bit & 0x01) 9505 *nvram_data |= (0x01 << (15 - x)); 9506 else 9507 *nvram_data &= ~(0x01 << (15 - x)); 9508 } 9509 } 9510 9511 /* 9512 * Read Tekram NvRAM data. 9513 */ 9514 static int T93C46_Read_Data(hcb_p np, u_short *data,int len,u_char *gpreg) 9515 { 9516 u_char read_bit; 9517 int x; 9518 9519 for (x = 0; x < len; x++) { 9520 /* output read command and address */ 9521 T93C46_Send_Command(np, 0x180 | x, &read_bit, gpreg); 9522 if (read_bit & 0x01) 9523 return 1; /* Bad */ 9524 T93C46_Read_Word(np, &data[x], gpreg); 9525 T93C46_Stop(np, gpreg); 9526 } 9527 9528 return 0; 9529 } 9530 9531 /* 9532 * Try reading 93C46 Tekram NVRAM. 9533 */ 9534 static int sym_read_T93C46_nvram (hcb_p np, Tekram_nvram *nvram) 9535 { 9536 u_char gpcntl, gpreg; 9537 u_char old_gpcntl, old_gpreg; 9538 int retv = 1; 9539 9540 /* save current state of GPCNTL and GPREG */ 9541 old_gpreg = INB (nc_gpreg); 9542 old_gpcntl = INB (nc_gpcntl); 9543 9544 /* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in, 9545 1/2/4 out */ 9546 gpreg = old_gpreg & 0xe9; 9547 OUTB (nc_gpreg, gpreg); 9548 gpcntl = (old_gpcntl & 0xe9) | 0x09; 9549 OUTB (nc_gpcntl, gpcntl); 9550 9551 /* input all of NVRAM, 64 words */ 9552 retv = T93C46_Read_Data(np, (u_short *) nvram, 9553 sizeof(*nvram) / sizeof(short), &gpreg); 9554 9555 /* return GPIO0/1/2/4 to original states after having accessed NVRAM */ 9556 OUTB (nc_gpcntl, old_gpcntl); 9557 OUTB (nc_gpreg, old_gpreg); 9558 9559 return retv; 9560 } 9561 9562 /* 9563 * Try reading Tekram NVRAM. 9564 * Return 0 if OK. 9565 */ 9566 static int sym_read_Tekram_nvram (hcb_p np, Tekram_nvram *nvram) 9567 { 9568 u_char *data = (u_char *) nvram; 9569 int len = sizeof(*nvram); 9570 u_short csum; 9571 int x; 9572 9573 switch (np->device_id) { 9574 case PCI_ID_SYM53C885: 9575 case PCI_ID_SYM53C895: 9576 case PCI_ID_SYM53C896: 9577 x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, 9578 data, len); 9579 break; 9580 case PCI_ID_SYM53C875: 9581 x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, 9582 data, len); 9583 if (!x) 9584 break; 9585 default: 9586 x = sym_read_T93C46_nvram(np, nvram); 9587 break; 9588 } 9589 if (x) 9590 return 1; 9591 9592 /* verify checksum */ 9593 for (x = 0, csum = 0; x < len - 1; x += 2) 9594 csum += data[x] + (data[x+1] << 8); 9595 if (csum != 0x1234) 9596 return 1; 9597 9598 return 0; 9599 } 9600 9601 #endif /* SYM_CONF_NVRAM_SUPPORT */ 9602