1 /*- 2 * Copyright (c) 2012-2015 LSI Corp. 3 * Copyright (c) 2013-2015 Avago Technologies 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the author nor the names of any co-contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 31 * 32 * $FreeBSD$ 33 */ 34 35 /* 36 * Copyright (c) 2000-2015 LSI Corporation. 37 * Copyright (c) 2013-2015 Avago Technologies 38 * 39 * 40 * Name: mpi2_ioc.h 41 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages 42 * Creation Date: October 11, 2006 43 * 44 * mpi2_ioc.h Version: 02.00.24 45 * 46 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 47 * prefix are for use only on MPI v2.5 products, and must not be used 48 * with MPI v2.0 products. Unless otherwise noted, names beginning with 49 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 50 * 51 * Version History 52 * --------------- 53 * 54 * Date Version Description 55 * -------- -------- ------------------------------------------------------ 56 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 57 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to 58 * MaxTargets. 59 * Added TotalImageSize field to FWDownload Request. 60 * Added reserved words to FWUpload Request. 61 * 06-26-07 02.00.02 Added IR Configuration Change List Event. 62 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit 63 * request and replaced it with 64 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. 65 * Replaced the MinReplyQueueDepth field of the IOCFacts 66 * reply with MaxReplyDescriptorPostQueueDepth. 67 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum 68 * depth for the Reply Descriptor Post Queue. 69 * Added SASAddress field to Initiator Device Table 70 * Overflow Event data. 71 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING 72 * for SAS Initiator Device Status Change Event data. 73 * Modified Reason Code defines for SAS Topology Change 74 * List Event data, including adding a bit for PHY Vacant 75 * status, and adding a mask for the Reason Code. 76 * Added define for 77 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. 78 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. 79 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of 80 * the IOCFacts Reply. 81 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 82 * Moved MPI2_VERSION_UNION to mpi2.h. 83 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks 84 * instead of enables, and added SASBroadcastPrimitiveMasks 85 * field. 86 * Added Log Entry Added Event and related structure. 87 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. 88 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. 89 * Added MaxVolumes and MaxPersistentEntries fields to 90 * IOCFacts reply. 91 * Added ProtocalFlags and IOCCapabilities fields to 92 * MPI2_FW_IMAGE_HEADER. 93 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. 94 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to 95 * a U16 (from a U32). 96 * Removed extra 's' from EventMasks name. 97 * 06-27-08 02.00.08 Fixed an offset in a comment. 98 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. 99 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and 100 * renamed MinReplyFrameSize to ReplyFrameSize. 101 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. 102 * Added two new RAIDOperation values for Integrated RAID 103 * Operations Status Event data. 104 * Added four new IR Configuration Change List Event data 105 * ReasonCode values. 106 * Added two new ReasonCode defines for SAS Device Status 107 * Change Event data. 108 * Added three new DiscoveryStatus bits for the SAS 109 * Discovery event data. 110 * Added Multiplexing Status Change bit to the PhyStatus 111 * field of the SAS Topology Change List event data. 112 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. 113 * BootFlags are now product-specific. 114 * Added defines for the indivdual signature bytes 115 * for MPI2_INIT_IMAGE_FOOTER. 116 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. 117 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR 118 * define. 119 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE 120 * define. 121 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. 122 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. 123 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. 124 * Added two new reason codes for SAS Device Status Change 125 * Event. 126 * Added new event: SAS PHY Counter. 127 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. 128 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 129 * Added new product id family for 2208. 130 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. 131 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. 132 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. 133 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. 134 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. 135 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. 136 * Added Host Based Discovery Phy Event data. 137 * Added defines for ProductID Product field 138 * (MPI2_FW_HEADER_PID_). 139 * Modified values for SAS ProductID Family 140 * (MPI2_FW_HEADER_PID_FAMILY_). 141 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. 142 * Added PowerManagementControl Request structures and 143 * defines. 144 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. 145 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. 146 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. 147 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added 148 * SASNotifyPrimitiveMasks field to 149 * MPI2_EVENT_NOTIFICATION_REQUEST. 150 * Added Temperature Threshold Event. 151 * Added Host Message Event. 152 * Added Send Host Message request and reply. 153 * 05-25-11 02.00.18 For Extended Image Header, added 154 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and 155 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. 156 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. 157 * 08-24-11 02.00.19 Added PhysicalPort field to 158 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. 159 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. 160 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. 161 * 03-29-12 02.00.21 Added a product specific range to event values. 162 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. 163 * Added ElapsedSeconds field to 164 * MPI2_EVENT_DATA_IR_OPERATION_STATUS. 165 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE 166 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. 167 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. 168 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. 169 * Added Encrypted Hash Extended Image. 170 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. 171 * -------------------------------------------------------------------------- 172 */ 173 174 #ifndef MPI2_IOC_H 175 #define MPI2_IOC_H 176 177 /***************************************************************************** 178 * 179 * IOC Messages 180 * 181 *****************************************************************************/ 182 183 /**************************************************************************** 184 * IOCInit message 185 ****************************************************************************/ 186 187 /* IOCInit Request message */ 188 typedef struct _MPI2_IOC_INIT_REQUEST 189 { 190 U8 WhoInit; /* 0x00 */ 191 U8 Reserved1; /* 0x01 */ 192 U8 ChainOffset; /* 0x02 */ 193 U8 Function; /* 0x03 */ 194 U16 Reserved2; /* 0x04 */ 195 U8 Reserved3; /* 0x06 */ 196 U8 MsgFlags; /* 0x07 */ 197 U8 VP_ID; /* 0x08 */ 198 U8 VF_ID; /* 0x09 */ 199 U16 Reserved4; /* 0x0A */ 200 U16 MsgVersion; /* 0x0C */ 201 U16 HeaderVersion; /* 0x0E */ 202 U32 Reserved5; /* 0x10 */ 203 U16 Reserved6; /* 0x14 */ 204 U8 Reserved7; /* 0x16 */ 205 U8 HostMSIxVectors; /* 0x17 */ 206 U16 Reserved8; /* 0x18 */ 207 U16 SystemRequestFrameSize; /* 0x1A */ 208 U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ 209 U16 ReplyFreeQueueDepth; /* 0x1E */ 210 U32 SenseBufferAddressHigh; /* 0x20 */ 211 U32 SystemReplyAddressHigh; /* 0x24 */ 212 U64 SystemRequestFrameBaseAddress; /* 0x28 */ 213 U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ 214 U64 ReplyFreeQueueAddress; /* 0x38 */ 215 U64 TimeStamp; /* 0x40 */ 216 } MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, 217 Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; 218 219 /* WhoInit values */ 220 #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) 221 #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) 222 #define MPI2_WHOINIT_ROM_BIOS (0x02) 223 #define MPI2_WHOINIT_PCI_PEER (0x03) 224 #define MPI2_WHOINIT_HOST_DRIVER (0x04) 225 #define MPI2_WHOINIT_MANUFACTURER (0x05) 226 227 /* MsgFlags */ 228 #define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) 229 230 /* MsgVersion */ 231 #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) 232 #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) 233 #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) 234 #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) 235 236 /* HeaderVersion */ 237 #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) 238 #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) 239 #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) 240 #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) 241 242 /* minimum depth for a Reply Descriptor Post Queue */ 243 #define MPI2_RDPQ_DEPTH_MIN (16) 244 245 /* Reply Descriptor Post Queue Array Entry */ 246 typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY 247 { 248 U64 RDPQBaseAddress; /* 0x00 */ 249 U32 Reserved1; /* 0x08 */ 250 U32 Reserved2; /* 0x0C */ 251 } MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 252 MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 253 Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry; 254 255 /* IOCInit Reply message */ 256 typedef struct _MPI2_IOC_INIT_REPLY 257 { 258 U8 WhoInit; /* 0x00 */ 259 U8 Reserved1; /* 0x01 */ 260 U8 MsgLength; /* 0x02 */ 261 U8 Function; /* 0x03 */ 262 U16 Reserved2; /* 0x04 */ 263 U8 Reserved3; /* 0x06 */ 264 U8 MsgFlags; /* 0x07 */ 265 U8 VP_ID; /* 0x08 */ 266 U8 VF_ID; /* 0x09 */ 267 U16 Reserved4; /* 0x0A */ 268 U16 Reserved5; /* 0x0C */ 269 U16 IOCStatus; /* 0x0E */ 270 U32 IOCLogInfo; /* 0x10 */ 271 } MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, 272 Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; 273 274 275 /**************************************************************************** 276 * IOCFacts message 277 ****************************************************************************/ 278 279 /* IOCFacts Request message */ 280 typedef struct _MPI2_IOC_FACTS_REQUEST 281 { 282 U16 Reserved1; /* 0x00 */ 283 U8 ChainOffset; /* 0x02 */ 284 U8 Function; /* 0x03 */ 285 U16 Reserved2; /* 0x04 */ 286 U8 Reserved3; /* 0x06 */ 287 U8 MsgFlags; /* 0x07 */ 288 U8 VP_ID; /* 0x08 */ 289 U8 VF_ID; /* 0x09 */ 290 U16 Reserved4; /* 0x0A */ 291 } MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, 292 Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; 293 294 295 /* IOCFacts Reply message */ 296 typedef struct _MPI2_IOC_FACTS_REPLY 297 { 298 U16 MsgVersion; /* 0x00 */ 299 U8 MsgLength; /* 0x02 */ 300 U8 Function; /* 0x03 */ 301 U16 HeaderVersion; /* 0x04 */ 302 U8 IOCNumber; /* 0x06 */ 303 U8 MsgFlags; /* 0x07 */ 304 U8 VP_ID; /* 0x08 */ 305 U8 VF_ID; /* 0x09 */ 306 U16 Reserved1; /* 0x0A */ 307 U16 IOCExceptions; /* 0x0C */ 308 U16 IOCStatus; /* 0x0E */ 309 U32 IOCLogInfo; /* 0x10 */ 310 U8 MaxChainDepth; /* 0x14 */ 311 U8 WhoInit; /* 0x15 */ 312 U8 NumberOfPorts; /* 0x16 */ 313 U8 MaxMSIxVectors; /* 0x17 */ 314 U16 RequestCredit; /* 0x18 */ 315 U16 ProductID; /* 0x1A */ 316 U32 IOCCapabilities; /* 0x1C */ 317 MPI2_VERSION_UNION FWVersion; /* 0x20 */ 318 U16 IOCRequestFrameSize; /* 0x24 */ 319 U16 IOCMaxChainSegmentSize; /* 0x26 */ /* MPI 2.5 only; Reserved in MPI 2.0 */ 320 U16 MaxInitiators; /* 0x28 */ 321 U16 MaxTargets; /* 0x2A */ 322 U16 MaxSasExpanders; /* 0x2C */ 323 U16 MaxEnclosures; /* 0x2E */ 324 U16 ProtocolFlags; /* 0x30 */ 325 U16 HighPriorityCredit; /* 0x32 */ 326 U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ 327 U8 ReplyFrameSize; /* 0x36 */ 328 U8 MaxVolumes; /* 0x37 */ 329 U16 MaxDevHandle; /* 0x38 */ 330 U16 MaxPersistentEntries; /* 0x3A */ 331 U16 MinDevHandle; /* 0x3C */ 332 U16 Reserved4; /* 0x3E */ 333 } MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, 334 Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; 335 336 /* MsgVersion */ 337 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) 338 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) 339 #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) 340 #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) 341 342 /* HeaderVersion */ 343 #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) 344 #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) 345 #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) 346 #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) 347 348 /* IOCExceptions */ 349 #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) 350 #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) 351 352 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) 353 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) 354 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) 355 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) 356 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) 357 358 #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) 359 #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) 360 #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) 361 #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) 362 #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) 363 364 /* defines for WhoInit field are after the IOCInit Request */ 365 366 /* ProductID field uses MPI2_FW_HEADER_PID_ */ 367 368 /* IOCCapabilities */ 369 #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) 370 #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) 371 #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) 372 #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) 373 #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) 374 #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) 375 #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) 376 #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) 377 #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) 378 #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) 379 #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) 380 #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) 381 #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) 382 #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) 383 #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) 384 385 /* ProtocolFlags */ 386 #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) 387 #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) 388 389 390 /**************************************************************************** 391 * PortFacts message 392 ****************************************************************************/ 393 394 /* PortFacts Request message */ 395 typedef struct _MPI2_PORT_FACTS_REQUEST 396 { 397 U16 Reserved1; /* 0x00 */ 398 U8 ChainOffset; /* 0x02 */ 399 U8 Function; /* 0x03 */ 400 U16 Reserved2; /* 0x04 */ 401 U8 PortNumber; /* 0x06 */ 402 U8 MsgFlags; /* 0x07 */ 403 U8 VP_ID; /* 0x08 */ 404 U8 VF_ID; /* 0x09 */ 405 U16 Reserved3; /* 0x0A */ 406 } MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, 407 Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; 408 409 /* PortFacts Reply message */ 410 typedef struct _MPI2_PORT_FACTS_REPLY 411 { 412 U16 Reserved1; /* 0x00 */ 413 U8 MsgLength; /* 0x02 */ 414 U8 Function; /* 0x03 */ 415 U16 Reserved2; /* 0x04 */ 416 U8 PortNumber; /* 0x06 */ 417 U8 MsgFlags; /* 0x07 */ 418 U8 VP_ID; /* 0x08 */ 419 U8 VF_ID; /* 0x09 */ 420 U16 Reserved3; /* 0x0A */ 421 U16 Reserved4; /* 0x0C */ 422 U16 IOCStatus; /* 0x0E */ 423 U32 IOCLogInfo; /* 0x10 */ 424 U8 Reserved5; /* 0x14 */ 425 U8 PortType; /* 0x15 */ 426 U16 Reserved6; /* 0x16 */ 427 U16 MaxPostedCmdBuffers; /* 0x18 */ 428 U16 Reserved7; /* 0x1A */ 429 } MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, 430 Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; 431 432 /* PortType values */ 433 #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) 434 #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) 435 #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) 436 #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) 437 #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) 438 439 440 /**************************************************************************** 441 * PortEnable message 442 ****************************************************************************/ 443 444 /* PortEnable Request message */ 445 typedef struct _MPI2_PORT_ENABLE_REQUEST 446 { 447 U16 Reserved1; /* 0x00 */ 448 U8 ChainOffset; /* 0x02 */ 449 U8 Function; /* 0x03 */ 450 U8 Reserved2; /* 0x04 */ 451 U8 PortFlags; /* 0x05 */ 452 U8 Reserved3; /* 0x06 */ 453 U8 MsgFlags; /* 0x07 */ 454 U8 VP_ID; /* 0x08 */ 455 U8 VF_ID; /* 0x09 */ 456 U16 Reserved4; /* 0x0A */ 457 } MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, 458 Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; 459 460 461 /* PortEnable Reply message */ 462 typedef struct _MPI2_PORT_ENABLE_REPLY 463 { 464 U16 Reserved1; /* 0x00 */ 465 U8 MsgLength; /* 0x02 */ 466 U8 Function; /* 0x03 */ 467 U8 Reserved2; /* 0x04 */ 468 U8 PortFlags; /* 0x05 */ 469 U8 Reserved3; /* 0x06 */ 470 U8 MsgFlags; /* 0x07 */ 471 U8 VP_ID; /* 0x08 */ 472 U8 VF_ID; /* 0x09 */ 473 U16 Reserved4; /* 0x0A */ 474 U16 Reserved5; /* 0x0C */ 475 U16 IOCStatus; /* 0x0E */ 476 U32 IOCLogInfo; /* 0x10 */ 477 } MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, 478 Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; 479 480 481 /**************************************************************************** 482 * EventNotification message 483 ****************************************************************************/ 484 485 /* EventNotification Request message */ 486 #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) 487 488 typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST 489 { 490 U16 Reserved1; /* 0x00 */ 491 U8 ChainOffset; /* 0x02 */ 492 U8 Function; /* 0x03 */ 493 U16 Reserved2; /* 0x04 */ 494 U8 Reserved3; /* 0x06 */ 495 U8 MsgFlags; /* 0x07 */ 496 U8 VP_ID; /* 0x08 */ 497 U8 VF_ID; /* 0x09 */ 498 U16 Reserved4; /* 0x0A */ 499 U32 Reserved5; /* 0x0C */ 500 U32 Reserved6; /* 0x10 */ 501 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ 502 U16 SASBroadcastPrimitiveMasks; /* 0x24 */ 503 U16 SASNotifyPrimitiveMasks; /* 0x26 */ 504 U32 Reserved8; /* 0x28 */ 505 } MPI2_EVENT_NOTIFICATION_REQUEST, 506 MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, 507 Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; 508 509 510 /* EventNotification Reply message */ 511 typedef struct _MPI2_EVENT_NOTIFICATION_REPLY 512 { 513 U16 EventDataLength; /* 0x00 */ 514 U8 MsgLength; /* 0x02 */ 515 U8 Function; /* 0x03 */ 516 U16 Reserved1; /* 0x04 */ 517 U8 AckRequired; /* 0x06 */ 518 U8 MsgFlags; /* 0x07 */ 519 U8 VP_ID; /* 0x08 */ 520 U8 VF_ID; /* 0x09 */ 521 U16 Reserved2; /* 0x0A */ 522 U16 Reserved3; /* 0x0C */ 523 U16 IOCStatus; /* 0x0E */ 524 U32 IOCLogInfo; /* 0x10 */ 525 U16 Event; /* 0x14 */ 526 U16 Reserved4; /* 0x16 */ 527 U32 EventContext; /* 0x18 */ 528 U32 EventData[1]; /* 0x1C */ 529 } MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, 530 Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; 531 532 /* AckRequired */ 533 #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) 534 #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) 535 536 /* Event */ 537 #define MPI2_EVENT_LOG_DATA (0x0001) 538 #define MPI2_EVENT_STATE_CHANGE (0x0002) 539 #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) 540 #define MPI2_EVENT_EVENT_CHANGE (0x000A) 541 #define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ 542 #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) 543 #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) 544 #define MPI2_EVENT_SAS_DISCOVERY (0x0016) 545 #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) 546 #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) 547 #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) 548 #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) 549 #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) 550 #define MPI2_EVENT_IR_VOLUME (0x001E) 551 #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) 552 #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) 553 #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) 554 #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) 555 #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) 556 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) 557 #define MPI2_EVENT_SAS_QUIESCE (0x0025) 558 #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) 559 #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) 560 #define MPI2_EVENT_HOST_MESSAGE (0x0028) 561 #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) 562 #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) 563 #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) 564 565 566 /* Log Entry Added Event data */ 567 568 /* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ 569 #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) 570 571 typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED 572 { 573 U64 TimeStamp; /* 0x00 */ 574 U32 Reserved1; /* 0x08 */ 575 U16 LogSequence; /* 0x0C */ 576 U16 LogEntryQualifier; /* 0x0E */ 577 U8 VP_ID; /* 0x10 */ 578 U8 VF_ID; /* 0x11 */ 579 U16 Reserved2; /* 0x12 */ 580 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ 581 } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 582 MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 583 Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; 584 585 586 /* GPIO Interrupt Event data */ 587 588 typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT 589 { 590 U8 GPIONum; /* 0x00 */ 591 U8 Reserved1; /* 0x01 */ 592 U16 Reserved2; /* 0x02 */ 593 } MPI2_EVENT_DATA_GPIO_INTERRUPT, 594 MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, 595 Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; 596 597 598 /* Temperature Threshold Event data */ 599 600 typedef struct _MPI2_EVENT_DATA_TEMPERATURE 601 { 602 U16 Status; /* 0x00 */ 603 U8 SensorNum; /* 0x02 */ 604 U8 Reserved1; /* 0x03 */ 605 U16 CurrentTemperature; /* 0x04 */ 606 U16 Reserved2; /* 0x06 */ 607 U32 Reserved3; /* 0x08 */ 608 U32 Reserved4; /* 0x0C */ 609 } MPI2_EVENT_DATA_TEMPERATURE, 610 MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, 611 Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; 612 613 /* Temperature Threshold Event data Status bits */ 614 #define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) 615 #define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) 616 #define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) 617 #define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) 618 619 620 /* Host Message Event data */ 621 622 typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE 623 { 624 U8 SourceVF_ID; /* 0x00 */ 625 U8 Reserved1; /* 0x01 */ 626 U16 Reserved2; /* 0x02 */ 627 U32 Reserved3; /* 0x04 */ 628 U32 HostData[1]; /* 0x08 */ 629 } MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, 630 Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; 631 632 633 /* Power Performance Change Event */ 634 635 typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE 636 { 637 U8 CurrentPowerMode; /* 0x00 */ 638 U8 PreviousPowerMode; /* 0x01 */ 639 U16 Reserved1; /* 0x02 */ 640 } MPI2_EVENT_DATA_POWER_PERF_CHANGE, 641 MPI2_POINTER PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, 642 Mpi2EventDataPowerPerfChange_t, MPI2_POINTER pMpi2EventDataPowerPerfChange_t; 643 644 /* defines for CurrentPowerMode and PreviousPowerMode fields */ 645 #define MPI2_EVENT_PM_INIT_MASK (0xC0) 646 #define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) 647 #define MPI2_EVENT_PM_INIT_HOST (0x40) 648 #define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) 649 #define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) 650 651 #define MPI2_EVENT_PM_MODE_MASK (0x07) 652 #define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) 653 #define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) 654 #define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) 655 #define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) 656 #define MPI2_EVENT_PM_MODE_STANDBY (0x06) 657 658 659 /* Hard Reset Received Event data */ 660 661 typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED 662 { 663 U8 Reserved1; /* 0x00 */ 664 U8 Port; /* 0x01 */ 665 U16 Reserved2; /* 0x02 */ 666 } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 667 MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 668 Mpi2EventDataHardResetReceived_t, 669 MPI2_POINTER pMpi2EventDataHardResetReceived_t; 670 671 672 /* Task Set Full Event data */ 673 /* this event is obsolete */ 674 675 typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL 676 { 677 U16 DevHandle; /* 0x00 */ 678 U16 CurrentDepth; /* 0x02 */ 679 } MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, 680 Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; 681 682 683 /* SAS Device Status Change Event data */ 684 685 typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE 686 { 687 U16 TaskTag; /* 0x00 */ 688 U8 ReasonCode; /* 0x02 */ 689 U8 PhysicalPort; /* 0x03 */ 690 U8 ASC; /* 0x04 */ 691 U8 ASCQ; /* 0x05 */ 692 U16 DevHandle; /* 0x06 */ 693 U32 Reserved2; /* 0x08 */ 694 U64 SASAddress; /* 0x0C */ 695 U8 LUN[8]; /* 0x14 */ 696 } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 697 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 698 Mpi2EventDataSasDeviceStatusChange_t, 699 MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; 700 701 /* SAS Device Status Change Event data ReasonCode values */ 702 #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) 703 #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) 704 #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 705 #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 706 #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 707 #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 708 #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 709 #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 710 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 711 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 712 #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) 713 #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) 714 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) 715 716 717 /* Integrated RAID Operation Status Event data */ 718 719 typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS 720 { 721 U16 VolDevHandle; /* 0x00 */ 722 U16 Reserved1; /* 0x02 */ 723 U8 RAIDOperation; /* 0x04 */ 724 U8 PercentComplete; /* 0x05 */ 725 U16 Reserved2; /* 0x06 */ 726 U32 ElapsedSeconds; /* 0x08 */ 727 } MPI2_EVENT_DATA_IR_OPERATION_STATUS, 728 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, 729 Mpi2EventDataIrOperationStatus_t, 730 MPI2_POINTER pMpi2EventDataIrOperationStatus_t; 731 732 /* Integrated RAID Operation Status Event data RAIDOperation values */ 733 #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) 734 #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) 735 #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) 736 #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) 737 #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) 738 739 740 /* Integrated RAID Volume Event data */ 741 742 typedef struct _MPI2_EVENT_DATA_IR_VOLUME 743 { 744 U16 VolDevHandle; /* 0x00 */ 745 U8 ReasonCode; /* 0x02 */ 746 U8 Reserved1; /* 0x03 */ 747 U32 NewValue; /* 0x04 */ 748 U32 PreviousValue; /* 0x08 */ 749 } MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, 750 Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; 751 752 /* Integrated RAID Volume Event data ReasonCode values */ 753 #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) 754 #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) 755 #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) 756 757 758 /* Integrated RAID Physical Disk Event data */ 759 760 typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK 761 { 762 U16 Reserved1; /* 0x00 */ 763 U8 ReasonCode; /* 0x02 */ 764 U8 PhysDiskNum; /* 0x03 */ 765 U16 PhysDiskDevHandle; /* 0x04 */ 766 U16 Reserved2; /* 0x06 */ 767 U16 Slot; /* 0x08 */ 768 U16 EnclosureHandle; /* 0x0A */ 769 U32 NewValue; /* 0x0C */ 770 U32 PreviousValue; /* 0x10 */ 771 } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 772 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 773 Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; 774 775 /* Integrated RAID Physical Disk Event data ReasonCode values */ 776 #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) 777 #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) 778 #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) 779 780 781 /* Integrated RAID Configuration Change List Event data */ 782 783 /* 784 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 785 * one and check NumElements at runtime. 786 */ 787 #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT 788 #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) 789 #endif 790 791 typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT 792 { 793 U16 ElementFlags; /* 0x00 */ 794 U16 VolDevHandle; /* 0x02 */ 795 U8 ReasonCode; /* 0x04 */ 796 U8 PhysDiskNum; /* 0x05 */ 797 U16 PhysDiskDevHandle; /* 0x06 */ 798 } MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, 799 Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; 800 801 /* IR Configuration Change List Event data ElementFlags values */ 802 #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) 803 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) 804 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) 805 #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) 806 807 /* IR Configuration Change List Event data ReasonCode values */ 808 #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) 809 #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) 810 #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) 811 #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) 812 #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) 813 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) 814 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) 815 #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) 816 #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) 817 818 typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST 819 { 820 U8 NumElements; /* 0x00 */ 821 U8 Reserved1; /* 0x01 */ 822 U8 Reserved2; /* 0x02 */ 823 U8 ConfigNum; /* 0x03 */ 824 U32 Flags; /* 0x04 */ 825 MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ 826 } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 827 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 828 Mpi2EventDataIrConfigChangeList_t, 829 MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; 830 831 /* IR Configuration Change List Event data Flags values */ 832 #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) 833 834 835 /* SAS Discovery Event data */ 836 837 typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY 838 { 839 U8 Flags; /* 0x00 */ 840 U8 ReasonCode; /* 0x01 */ 841 U8 PhysicalPort; /* 0x02 */ 842 U8 Reserved1; /* 0x03 */ 843 U32 DiscoveryStatus; /* 0x04 */ 844 } MPI2_EVENT_DATA_SAS_DISCOVERY, 845 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, 846 Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; 847 848 /* SAS Discovery Event data Flags values */ 849 #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) 850 #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) 851 852 /* SAS Discovery Event data ReasonCode values */ 853 #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) 854 #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) 855 856 /* SAS Discovery Event data DiscoveryStatus values */ 857 #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 858 #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) 859 #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) 860 #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 861 #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) 862 #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 863 #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 864 #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) 865 #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 866 #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) 867 #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) 868 #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) 869 #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) 870 #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) 871 #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) 872 #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) 873 #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) 874 #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) 875 #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) 876 #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) 877 878 879 /* SAS Broadcast Primitive Event data */ 880 881 typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE 882 { 883 U8 PhyNum; /* 0x00 */ 884 U8 Port; /* 0x01 */ 885 U8 PortWidth; /* 0x02 */ 886 U8 Primitive; /* 0x03 */ 887 } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 888 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 889 Mpi2EventDataSasBroadcastPrimitive_t, 890 MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; 891 892 /* defines for the Primitive field */ 893 #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) 894 #define MPI2_EVENT_PRIMITIVE_SES (0x02) 895 #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) 896 #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) 897 #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) 898 #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) 899 #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) 900 #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) 901 902 903 /* SAS Notify Primitive Event data */ 904 905 typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE 906 { 907 U8 PhyNum; /* 0x00 */ 908 U8 Port; /* 0x01 */ 909 U8 Reserved1; /* 0x02 */ 910 U8 Primitive; /* 0x03 */ 911 } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 912 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 913 Mpi2EventDataSasNotifyPrimitive_t, 914 MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; 915 916 /* defines for the Primitive field */ 917 #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) 918 #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) 919 #define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) 920 #define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) 921 922 923 /* SAS Initiator Device Status Change Event data */ 924 925 typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE 926 { 927 U8 ReasonCode; /* 0x00 */ 928 U8 PhysicalPort; /* 0x01 */ 929 U16 DevHandle; /* 0x02 */ 930 U64 SASAddress; /* 0x04 */ 931 } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 932 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 933 Mpi2EventDataSasInitDevStatusChange_t, 934 MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; 935 936 /* SAS Initiator Device Status Change event ReasonCode values */ 937 #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) 938 #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) 939 940 941 /* SAS Initiator Device Table Overflow Event data */ 942 943 typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW 944 { 945 U16 MaxInit; /* 0x00 */ 946 U16 CurrentInit; /* 0x02 */ 947 U64 SASAddress; /* 0x04 */ 948 } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 949 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 950 Mpi2EventDataSasInitTableOverflow_t, 951 MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; 952 953 954 /* SAS Topology Change List Event data */ 955 956 /* 957 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 958 * one and check NumEntries at runtime. 959 */ 960 #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT 961 #define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) 962 #endif 963 964 typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY 965 { 966 U16 AttachedDevHandle; /* 0x00 */ 967 U8 LinkRate; /* 0x02 */ 968 U8 PhyStatus; /* 0x03 */ 969 } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, 970 Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; 971 972 typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST 973 { 974 U16 EnclosureHandle; /* 0x00 */ 975 U16 ExpanderDevHandle; /* 0x02 */ 976 U8 NumPhys; /* 0x04 */ 977 U8 Reserved1; /* 0x05 */ 978 U16 Reserved2; /* 0x06 */ 979 U8 NumEntries; /* 0x08 */ 980 U8 StartPhyNum; /* 0x09 */ 981 U8 ExpStatus; /* 0x0A */ 982 U8 PhysicalPort; /* 0x0B */ 983 MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ 984 } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 985 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 986 Mpi2EventDataSasTopologyChangeList_t, 987 MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; 988 989 /* values for the ExpStatus field */ 990 #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) 991 #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) 992 #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) 993 #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) 994 #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) 995 996 /* defines for the LinkRate field */ 997 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) 998 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) 999 #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) 1000 #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) 1001 1002 #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) 1003 #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) 1004 #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) 1005 #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) 1006 #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) 1007 #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) 1008 #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) 1009 #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) 1010 #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) 1011 #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) 1012 #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) 1013 1014 /* values for the PhyStatus field */ 1015 #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) 1016 #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) 1017 /* values for the PhyStatus ReasonCode sub-field */ 1018 #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) 1019 #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) 1020 #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) 1021 #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) 1022 #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) 1023 #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) 1024 1025 1026 /* SAS Enclosure Device Status Change Event data */ 1027 1028 typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE 1029 { 1030 U16 EnclosureHandle; /* 0x00 */ 1031 U8 ReasonCode; /* 0x02 */ 1032 U8 PhysicalPort; /* 0x03 */ 1033 U64 EnclosureLogicalID; /* 0x04 */ 1034 U16 NumSlots; /* 0x0C */ 1035 U16 StartSlot; /* 0x0E */ 1036 U32 PhyBits; /* 0x10 */ 1037 } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1038 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1039 Mpi2EventDataSasEnclDevStatusChange_t, 1040 MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t; 1041 1042 /* SAS Enclosure Device Status Change event ReasonCode values */ 1043 #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) 1044 #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) 1045 1046 1047 /* SAS PHY Counter Event data */ 1048 1049 typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER 1050 { 1051 U64 TimeStamp; /* 0x00 */ 1052 U32 Reserved1; /* 0x08 */ 1053 U8 PhyEventCode; /* 0x0C */ 1054 U8 PhyNum; /* 0x0D */ 1055 U16 Reserved2; /* 0x0E */ 1056 U32 PhyEventInfo; /* 0x10 */ 1057 U8 CounterType; /* 0x14 */ 1058 U8 ThresholdWindow; /* 0x15 */ 1059 U8 TimeUnits; /* 0x16 */ 1060 U8 Reserved3; /* 0x17 */ 1061 U32 EventThreshold; /* 0x18 */ 1062 U16 ThresholdFlags; /* 0x1C */ 1063 U16 Reserved4; /* 0x1E */ 1064 } MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1065 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1066 Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; 1067 1068 /* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the PhyEventCode field */ 1069 1070 /* use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ 1071 1072 /* use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ 1073 1074 /* use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ 1075 1076 1077 /* SAS Quiesce Event data */ 1078 1079 typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE 1080 { 1081 U8 ReasonCode; /* 0x00 */ 1082 U8 Reserved1; /* 0x01 */ 1083 U16 Reserved2; /* 0x02 */ 1084 U32 Reserved3; /* 0x04 */ 1085 } MPI2_EVENT_DATA_SAS_QUIESCE, 1086 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, 1087 Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; 1088 1089 /* SAS Quiesce Event data ReasonCode values */ 1090 #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) 1091 #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) 1092 1093 1094 /* Host Based Discovery Phy Event data */ 1095 1096 typedef struct _MPI2_EVENT_HBD_PHY_SAS 1097 { 1098 U8 Flags; /* 0x00 */ 1099 U8 NegotiatedLinkRate; /* 0x01 */ 1100 U8 PhyNum; /* 0x02 */ 1101 U8 PhysicalPort; /* 0x03 */ 1102 U32 Reserved1; /* 0x04 */ 1103 U8 InitialFrame[28]; /* 0x08 */ 1104 } MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS, 1105 Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t; 1106 1107 /* values for the Flags field */ 1108 #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) 1109 #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) 1110 1111 /* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for the NegotiatedLinkRate field */ 1112 1113 typedef union _MPI2_EVENT_HBD_DESCRIPTOR 1114 { 1115 MPI2_EVENT_HBD_PHY_SAS Sas; 1116 } MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR, 1117 Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t; 1118 1119 typedef struct _MPI2_EVENT_DATA_HBD_PHY 1120 { 1121 U8 DescriptorType; /* 0x00 */ 1122 U8 Reserved1; /* 0x01 */ 1123 U16 Reserved2; /* 0x02 */ 1124 U32 Reserved3; /* 0x04 */ 1125 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */ 1126 } MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY, 1127 Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t; 1128 1129 /* values for the DescriptorType field */ 1130 #define MPI2_EVENT_HBD_DT_SAS (0x01) 1131 1132 1133 1134 /**************************************************************************** 1135 * EventAck message 1136 ****************************************************************************/ 1137 1138 /* EventAck Request message */ 1139 typedef struct _MPI2_EVENT_ACK_REQUEST 1140 { 1141 U16 Reserved1; /* 0x00 */ 1142 U8 ChainOffset; /* 0x02 */ 1143 U8 Function; /* 0x03 */ 1144 U16 Reserved2; /* 0x04 */ 1145 U8 Reserved3; /* 0x06 */ 1146 U8 MsgFlags; /* 0x07 */ 1147 U8 VP_ID; /* 0x08 */ 1148 U8 VF_ID; /* 0x09 */ 1149 U16 Reserved4; /* 0x0A */ 1150 U16 Event; /* 0x0C */ 1151 U16 Reserved5; /* 0x0E */ 1152 U32 EventContext; /* 0x10 */ 1153 } MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, 1154 Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; 1155 1156 1157 /* EventAck Reply message */ 1158 typedef struct _MPI2_EVENT_ACK_REPLY 1159 { 1160 U16 Reserved1; /* 0x00 */ 1161 U8 MsgLength; /* 0x02 */ 1162 U8 Function; /* 0x03 */ 1163 U16 Reserved2; /* 0x04 */ 1164 U8 Reserved3; /* 0x06 */ 1165 U8 MsgFlags; /* 0x07 */ 1166 U8 VP_ID; /* 0x08 */ 1167 U8 VF_ID; /* 0x09 */ 1168 U16 Reserved4; /* 0x0A */ 1169 U16 Reserved5; /* 0x0C */ 1170 U16 IOCStatus; /* 0x0E */ 1171 U32 IOCLogInfo; /* 0x10 */ 1172 } MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, 1173 Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; 1174 1175 1176 /**************************************************************************** 1177 * SendHostMessage message 1178 ****************************************************************************/ 1179 1180 /* SendHostMessage Request message */ 1181 typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST 1182 { 1183 U16 HostDataLength; /* 0x00 */ 1184 U8 ChainOffset; /* 0x02 */ 1185 U8 Function; /* 0x03 */ 1186 U16 Reserved1; /* 0x04 */ 1187 U8 Reserved2; /* 0x06 */ 1188 U8 MsgFlags; /* 0x07 */ 1189 U8 VP_ID; /* 0x08 */ 1190 U8 VF_ID; /* 0x09 */ 1191 U16 Reserved3; /* 0x0A */ 1192 U8 Reserved4; /* 0x0C */ 1193 U8 DestVF_ID; /* 0x0D */ 1194 U16 Reserved5; /* 0x0E */ 1195 U32 Reserved6; /* 0x10 */ 1196 U32 Reserved7; /* 0x14 */ 1197 U32 Reserved8; /* 0x18 */ 1198 U32 Reserved9; /* 0x1C */ 1199 U32 Reserved10; /* 0x20 */ 1200 U32 HostData[1]; /* 0x24 */ 1201 } MPI2_SEND_HOST_MESSAGE_REQUEST, 1202 MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, 1203 Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; 1204 1205 1206 /* SendHostMessage Reply message */ 1207 typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY 1208 { 1209 U16 HostDataLength; /* 0x00 */ 1210 U8 MsgLength; /* 0x02 */ 1211 U8 Function; /* 0x03 */ 1212 U16 Reserved1; /* 0x04 */ 1213 U8 Reserved2; /* 0x06 */ 1214 U8 MsgFlags; /* 0x07 */ 1215 U8 VP_ID; /* 0x08 */ 1216 U8 VF_ID; /* 0x09 */ 1217 U16 Reserved3; /* 0x0A */ 1218 U16 Reserved4; /* 0x0C */ 1219 U16 IOCStatus; /* 0x0E */ 1220 U32 IOCLogInfo; /* 0x10 */ 1221 } MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, 1222 Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; 1223 1224 1225 /**************************************************************************** 1226 * FWDownload message 1227 ****************************************************************************/ 1228 1229 /* MPI v2.0 FWDownload Request message */ 1230 typedef struct _MPI2_FW_DOWNLOAD_REQUEST 1231 { 1232 U8 ImageType; /* 0x00 */ 1233 U8 Reserved1; /* 0x01 */ 1234 U8 ChainOffset; /* 0x02 */ 1235 U8 Function; /* 0x03 */ 1236 U16 Reserved2; /* 0x04 */ 1237 U8 Reserved3; /* 0x06 */ 1238 U8 MsgFlags; /* 0x07 */ 1239 U8 VP_ID; /* 0x08 */ 1240 U8 VF_ID; /* 0x09 */ 1241 U16 Reserved4; /* 0x0A */ 1242 U32 TotalImageSize; /* 0x0C */ 1243 U32 Reserved5; /* 0x10 */ 1244 MPI2_MPI_SGE_UNION SGL; /* 0x14 */ 1245 } MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, 1246 Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; 1247 1248 #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) 1249 1250 #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) 1251 #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) 1252 #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) 1253 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) 1254 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) 1255 #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) 1256 #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) 1257 #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1258 #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) /* MPI v2.5 and newer */ 1259 #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) 1260 1261 /* MPI v2.0 FWDownload TransactionContext Element */ 1262 typedef struct _MPI2_FW_DOWNLOAD_TCSGE 1263 { 1264 U8 Reserved1; /* 0x00 */ 1265 U8 ContextSize; /* 0x01 */ 1266 U8 DetailsLength; /* 0x02 */ 1267 U8 Flags; /* 0x03 */ 1268 U32 Reserved2; /* 0x04 */ 1269 U32 ImageOffset; /* 0x08 */ 1270 U32 ImageSize; /* 0x0C */ 1271 } MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, 1272 Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; 1273 1274 1275 /* MPI v2.5 FWDownload Request message */ 1276 typedef struct _MPI25_FW_DOWNLOAD_REQUEST 1277 { 1278 U8 ImageType; /* 0x00 */ 1279 U8 Reserved1; /* 0x01 */ 1280 U8 ChainOffset; /* 0x02 */ 1281 U8 Function; /* 0x03 */ 1282 U16 Reserved2; /* 0x04 */ 1283 U8 Reserved3; /* 0x06 */ 1284 U8 MsgFlags; /* 0x07 */ 1285 U8 VP_ID; /* 0x08 */ 1286 U8 VF_ID; /* 0x09 */ 1287 U16 Reserved4; /* 0x0A */ 1288 U32 TotalImageSize; /* 0x0C */ 1289 U32 Reserved5; /* 0x10 */ 1290 U32 Reserved6; /* 0x14 */ 1291 U32 ImageOffset; /* 0x18 */ 1292 U32 ImageSize; /* 0x1C */ 1293 MPI25_SGE_IO_UNION SGL; /* 0x20 */ 1294 } MPI25_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_DOWNLOAD_REQUEST, 1295 Mpi25FWDownloadRequest, MPI2_POINTER pMpi25FWDownloadRequest; 1296 1297 1298 /* FWDownload Reply message */ 1299 typedef struct _MPI2_FW_DOWNLOAD_REPLY 1300 { 1301 U8 ImageType; /* 0x00 */ 1302 U8 Reserved1; /* 0x01 */ 1303 U8 MsgLength; /* 0x02 */ 1304 U8 Function; /* 0x03 */ 1305 U16 Reserved2; /* 0x04 */ 1306 U8 Reserved3; /* 0x06 */ 1307 U8 MsgFlags; /* 0x07 */ 1308 U8 VP_ID; /* 0x08 */ 1309 U8 VF_ID; /* 0x09 */ 1310 U16 Reserved4; /* 0x0A */ 1311 U16 Reserved5; /* 0x0C */ 1312 U16 IOCStatus; /* 0x0E */ 1313 U32 IOCLogInfo; /* 0x10 */ 1314 } MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, 1315 Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; 1316 1317 1318 /**************************************************************************** 1319 * FWUpload message 1320 ****************************************************************************/ 1321 1322 /* MPI v2.0 FWUpload Request message */ 1323 typedef struct _MPI2_FW_UPLOAD_REQUEST 1324 { 1325 U8 ImageType; /* 0x00 */ 1326 U8 Reserved1; /* 0x01 */ 1327 U8 ChainOffset; /* 0x02 */ 1328 U8 Function; /* 0x03 */ 1329 U16 Reserved2; /* 0x04 */ 1330 U8 Reserved3; /* 0x06 */ 1331 U8 MsgFlags; /* 0x07 */ 1332 U8 VP_ID; /* 0x08 */ 1333 U8 VF_ID; /* 0x09 */ 1334 U16 Reserved4; /* 0x0A */ 1335 U32 Reserved5; /* 0x0C */ 1336 U32 Reserved6; /* 0x10 */ 1337 MPI2_MPI_SGE_UNION SGL; /* 0x14 */ 1338 } MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, 1339 Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; 1340 1341 #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) 1342 #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) 1343 #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) 1344 #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) 1345 #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) 1346 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) 1347 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) 1348 #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) 1349 #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) 1350 #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1351 1352 /* MPI v2.0 FWUpload TransactionContext Element */ 1353 typedef struct _MPI2_FW_UPLOAD_TCSGE 1354 { 1355 U8 Reserved1; /* 0x00 */ 1356 U8 ContextSize; /* 0x01 */ 1357 U8 DetailsLength; /* 0x02 */ 1358 U8 Flags; /* 0x03 */ 1359 U32 Reserved2; /* 0x04 */ 1360 U32 ImageOffset; /* 0x08 */ 1361 U32 ImageSize; /* 0x0C */ 1362 } MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, 1363 Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; 1364 1365 1366 /* MPI v2.5 FWUpload Request message */ 1367 typedef struct _MPI25_FW_UPLOAD_REQUEST 1368 { 1369 U8 ImageType; /* 0x00 */ 1370 U8 Reserved1; /* 0x01 */ 1371 U8 ChainOffset; /* 0x02 */ 1372 U8 Function; /* 0x03 */ 1373 U16 Reserved2; /* 0x04 */ 1374 U8 Reserved3; /* 0x06 */ 1375 U8 MsgFlags; /* 0x07 */ 1376 U8 VP_ID; /* 0x08 */ 1377 U8 VF_ID; /* 0x09 */ 1378 U16 Reserved4; /* 0x0A */ 1379 U32 Reserved5; /* 0x0C */ 1380 U32 Reserved6; /* 0x10 */ 1381 U32 Reserved7; /* 0x14 */ 1382 U32 ImageOffset; /* 0x18 */ 1383 U32 ImageSize; /* 0x1C */ 1384 MPI25_SGE_IO_UNION SGL; /* 0x20 */ 1385 } MPI25_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_UPLOAD_REQUEST, 1386 Mpi25FWUploadRequest_t, MPI2_POINTER pMpi25FWUploadRequest_t; 1387 1388 1389 /* FWUpload Reply message */ 1390 typedef struct _MPI2_FW_UPLOAD_REPLY 1391 { 1392 U8 ImageType; /* 0x00 */ 1393 U8 Reserved1; /* 0x01 */ 1394 U8 MsgLength; /* 0x02 */ 1395 U8 Function; /* 0x03 */ 1396 U16 Reserved2; /* 0x04 */ 1397 U8 Reserved3; /* 0x06 */ 1398 U8 MsgFlags; /* 0x07 */ 1399 U8 VP_ID; /* 0x08 */ 1400 U8 VF_ID; /* 0x09 */ 1401 U16 Reserved4; /* 0x0A */ 1402 U16 Reserved5; /* 0x0C */ 1403 U16 IOCStatus; /* 0x0E */ 1404 U32 IOCLogInfo; /* 0x10 */ 1405 U32 ActualImageSize; /* 0x14 */ 1406 } MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, 1407 Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; 1408 1409 1410 /* FW Image Header */ 1411 typedef struct _MPI2_FW_IMAGE_HEADER 1412 { 1413 U32 Signature; /* 0x00 */ 1414 U32 Signature0; /* 0x04 */ 1415 U32 Signature1; /* 0x08 */ 1416 U32 Signature2; /* 0x0C */ 1417 MPI2_VERSION_UNION MPIVersion; /* 0x10 */ 1418 MPI2_VERSION_UNION FWVersion; /* 0x14 */ 1419 MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */ 1420 MPI2_VERSION_UNION PackageVersion; /* 0x1C */ 1421 U16 VendorID; /* 0x20 */ 1422 U16 ProductID; /* 0x22 */ 1423 U16 ProtocolFlags; /* 0x24 */ 1424 U16 Reserved26; /* 0x26 */ 1425 U32 IOCCapabilities; /* 0x28 */ 1426 U32 ImageSize; /* 0x2C */ 1427 U32 NextImageHeaderOffset; /* 0x30 */ 1428 U32 Checksum; /* 0x34 */ 1429 U32 Reserved38; /* 0x38 */ 1430 U32 Reserved3C; /* 0x3C */ 1431 U32 Reserved40; /* 0x40 */ 1432 U32 Reserved44; /* 0x44 */ 1433 U32 Reserved48; /* 0x48 */ 1434 U32 Reserved4C; /* 0x4C */ 1435 U32 Reserved50; /* 0x50 */ 1436 U32 Reserved54; /* 0x54 */ 1437 U32 Reserved58; /* 0x58 */ 1438 U32 Reserved5C; /* 0x5C */ 1439 U32 Reserved60; /* 0x60 */ 1440 U32 FirmwareVersionNameWhat; /* 0x64 */ 1441 U8 FirmwareVersionName[32]; /* 0x68 */ 1442 U32 VendorNameWhat; /* 0x88 */ 1443 U8 VendorName[32]; /* 0x8C */ 1444 U32 PackageNameWhat; /* 0x88 */ 1445 U8 PackageName[32]; /* 0x8C */ 1446 U32 ReservedD0; /* 0xD0 */ 1447 U32 ReservedD4; /* 0xD4 */ 1448 U32 ReservedD8; /* 0xD8 */ 1449 U32 ReservedDC; /* 0xDC */ 1450 U32 ReservedE0; /* 0xE0 */ 1451 U32 ReservedE4; /* 0xE4 */ 1452 U32 ReservedE8; /* 0xE8 */ 1453 U32 ReservedEC; /* 0xEC */ 1454 U32 ReservedF0; /* 0xF0 */ 1455 U32 ReservedF4; /* 0xF4 */ 1456 U32 ReservedF8; /* 0xF8 */ 1457 U32 ReservedFC; /* 0xFC */ 1458 } MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER, 1459 Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t; 1460 1461 /* Signature field */ 1462 #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) 1463 #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) 1464 #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) 1465 1466 /* Signature0 field */ 1467 #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) 1468 #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) 1469 1470 /* Signature1 field */ 1471 #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) 1472 #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) 1473 1474 /* Signature2 field */ 1475 #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) 1476 #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) 1477 1478 1479 /* defines for using the ProductID field */ 1480 #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) 1481 #define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) 1482 1483 #define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) 1484 #define MPI2_FW_HEADER_PID_PROD_A (0x0000) 1485 #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) 1486 #define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) 1487 1488 1489 #define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) 1490 /* SAS ProductID Family bits */ 1491 #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) 1492 #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) 1493 #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) 1494 1495 /* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ 1496 1497 /* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ 1498 1499 1500 #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) 1501 #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) 1502 #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) 1503 1504 #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) 1505 1506 #define MPI2_FW_HEADER_SIZE (0x100) 1507 1508 1509 /* Extended Image Header */ 1510 typedef struct _MPI2_EXT_IMAGE_HEADER 1511 1512 { 1513 U8 ImageType; /* 0x00 */ 1514 U8 Reserved1; /* 0x01 */ 1515 U16 Reserved2; /* 0x02 */ 1516 U32 Checksum; /* 0x04 */ 1517 U32 ImageSize; /* 0x08 */ 1518 U32 NextImageHeaderOffset; /* 0x0C */ 1519 U32 PackageVersion; /* 0x10 */ 1520 U32 Reserved3; /* 0x14 */ 1521 U32 Reserved4; /* 0x18 */ 1522 U32 Reserved5; /* 0x1C */ 1523 U8 IdentifyString[32]; /* 0x20 */ 1524 } MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER, 1525 Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t; 1526 1527 /* useful offsets */ 1528 #define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) 1529 #define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) 1530 #define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) 1531 1532 #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) 1533 1534 /* defines for the ImageType field */ 1535 #define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) 1536 #define MPI2_EXT_IMAGE_TYPE_FW (0x01) 1537 #define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) 1538 #define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) 1539 #define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) 1540 #define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) 1541 #define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) 1542 #define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) 1543 #define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) /* MPI v2.5 and newer */ 1544 #define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) 1545 #define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) 1546 1547 #define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */ 1548 1549 1550 1551 /* FLASH Layout Extended Image Data */ 1552 1553 /* 1554 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1555 * one and check RegionsPerLayout at runtime. 1556 */ 1557 #ifndef MPI2_FLASH_NUMBER_OF_REGIONS 1558 #define MPI2_FLASH_NUMBER_OF_REGIONS (1) 1559 #endif 1560 1561 /* 1562 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1563 * one and check NumberOfLayouts at runtime. 1564 */ 1565 #ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS 1566 #define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) 1567 #endif 1568 1569 typedef struct _MPI2_FLASH_REGION 1570 { 1571 U8 RegionType; /* 0x00 */ 1572 U8 Reserved1; /* 0x01 */ 1573 U16 Reserved2; /* 0x02 */ 1574 U32 RegionOffset; /* 0x04 */ 1575 U32 RegionSize; /* 0x08 */ 1576 U32 Reserved3; /* 0x0C */ 1577 } MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION, 1578 Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t; 1579 1580 typedef struct _MPI2_FLASH_LAYOUT 1581 { 1582 U32 FlashSize; /* 0x00 */ 1583 U32 Reserved1; /* 0x04 */ 1584 U32 Reserved2; /* 0x08 */ 1585 U32 Reserved3; /* 0x0C */ 1586 MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */ 1587 } MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT, 1588 Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t; 1589 1590 typedef struct _MPI2_FLASH_LAYOUT_DATA 1591 { 1592 U8 ImageRevision; /* 0x00 */ 1593 U8 Reserved1; /* 0x01 */ 1594 U8 SizeOfRegion; /* 0x02 */ 1595 U8 Reserved2; /* 0x03 */ 1596 U16 NumberOfLayouts; /* 0x04 */ 1597 U16 RegionsPerLayout; /* 0x06 */ 1598 U16 MinimumSectorAlignment; /* 0x08 */ 1599 U16 Reserved3; /* 0x0A */ 1600 U32 Reserved4; /* 0x0C */ 1601 MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */ 1602 } MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA, 1603 Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t; 1604 1605 /* defines for the RegionType field */ 1606 #define MPI2_FLASH_REGION_UNUSED (0x00) 1607 #define MPI2_FLASH_REGION_FIRMWARE (0x01) 1608 #define MPI2_FLASH_REGION_BIOS (0x02) 1609 #define MPI2_FLASH_REGION_NVDATA (0x03) 1610 #define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) 1611 #define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) 1612 #define MPI2_FLASH_REGION_CONFIG_1 (0x07) 1613 #define MPI2_FLASH_REGION_CONFIG_2 (0x08) 1614 #define MPI2_FLASH_REGION_MEGARAID (0x09) 1615 #define MPI2_FLASH_REGION_INIT (0x0A) 1616 1617 /* ImageRevision */ 1618 #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) 1619 1620 1621 1622 /* Supported Devices Extended Image Data */ 1623 1624 /* 1625 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1626 * one and check NumberOfDevices at runtime. 1627 */ 1628 #ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES 1629 #define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) 1630 #endif 1631 1632 typedef struct _MPI2_SUPPORTED_DEVICE 1633 { 1634 U16 DeviceID; /* 0x00 */ 1635 U16 VendorID; /* 0x02 */ 1636 U16 DeviceIDMask; /* 0x04 */ 1637 U16 Reserved1; /* 0x06 */ 1638 U8 LowPCIRev; /* 0x08 */ 1639 U8 HighPCIRev; /* 0x09 */ 1640 U16 Reserved2; /* 0x0A */ 1641 U32 Reserved3; /* 0x0C */ 1642 } MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE, 1643 Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t; 1644 1645 typedef struct _MPI2_SUPPORTED_DEVICES_DATA 1646 { 1647 U8 ImageRevision; /* 0x00 */ 1648 U8 Reserved1; /* 0x01 */ 1649 U8 NumberOfDevices; /* 0x02 */ 1650 U8 Reserved2; /* 0x03 */ 1651 U32 Reserved3; /* 0x04 */ 1652 MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */ 1653 } MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA, 1654 Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t; 1655 1656 /* ImageRevision */ 1657 #define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) 1658 1659 1660 /* Init Extended Image Data */ 1661 1662 typedef struct _MPI2_INIT_IMAGE_FOOTER 1663 1664 { 1665 U32 BootFlags; /* 0x00 */ 1666 U32 ImageSize; /* 0x04 */ 1667 U32 Signature0; /* 0x08 */ 1668 U32 Signature1; /* 0x0C */ 1669 U32 Signature2; /* 0x10 */ 1670 U32 ResetVector; /* 0x14 */ 1671 } MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER, 1672 Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t; 1673 1674 /* defines for the BootFlags field */ 1675 #define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) 1676 1677 /* defines for the ImageSize field */ 1678 #define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) 1679 1680 /* defines for the Signature0 field */ 1681 #define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) 1682 #define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) 1683 1684 /* defines for the Signature1 field */ 1685 #define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) 1686 #define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) 1687 1688 /* defines for the Signature2 field */ 1689 #define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) 1690 #define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) 1691 1692 /* Signature fields as individual bytes */ 1693 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) 1694 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) 1695 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) 1696 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) 1697 1698 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) 1699 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) 1700 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) 1701 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) 1702 1703 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) 1704 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) 1705 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) 1706 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) 1707 1708 /* defines for the ResetVector field */ 1709 #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) 1710 1711 1712 /* Encrypted Hash Extended Image Data */ 1713 1714 typedef struct _MPI25_ENCRYPTED_HASH_ENTRY 1715 { 1716 U8 HashImageType; /* 0x00 */ 1717 U8 HashAlgorithm; /* 0x01 */ 1718 U8 EncryptionAlgorithm; /* 0x02 */ 1719 U8 Reserved1; /* 0x03 */ 1720 U32 Reserved2; /* 0x04 */ 1721 U32 EncryptedHash[1]; /* 0x08 */ /* variable length */ 1722 } MPI25_ENCRYPTED_HASH_ENTRY, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_ENTRY, 1723 Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t; 1724 1725 /* values for HashImageType */ 1726 #define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) 1727 #define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) 1728 #define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) 1729 1730 /* values for HashAlgorithm */ 1731 #define MPI25_HASH_ALGORITHM_UNUSED (0x00) 1732 #define MPI25_HASH_ALGORITHM_SHA256 (0x01) 1733 1734 /* values for EncryptionAlgorithm */ 1735 #define MPI25_ENCRYPTION_ALG_UNUSED (0x00) 1736 #define MPI25_ENCRYPTION_ALG_RSA256 (0x01) 1737 1738 typedef struct _MPI25_ENCRYPTED_HASH_DATA 1739 { 1740 U8 ImageVersion; /* 0x00 */ 1741 U8 NumHash; /* 0x01 */ 1742 U16 Reserved1; /* 0x02 */ 1743 U32 Reserved2; /* 0x04 */ 1744 MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */ /* variable number of entries */ 1745 } MPI25_ENCRYPTED_HASH_DATA, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_DATA, 1746 Mpi25EncryptedHashData_t, MPI2_POINTER pMpi25EncryptedHashData_t; 1747 1748 /**************************************************************************** 1749 * PowerManagementControl message 1750 ****************************************************************************/ 1751 1752 /* PowerManagementControl Request message */ 1753 typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST 1754 { 1755 U8 Feature; /* 0x00 */ 1756 U8 Reserved1; /* 0x01 */ 1757 U8 ChainOffset; /* 0x02 */ 1758 U8 Function; /* 0x03 */ 1759 U16 Reserved2; /* 0x04 */ 1760 U8 Reserved3; /* 0x06 */ 1761 U8 MsgFlags; /* 0x07 */ 1762 U8 VP_ID; /* 0x08 */ 1763 U8 VF_ID; /* 0x09 */ 1764 U16 Reserved4; /* 0x0A */ 1765 U8 Parameter1; /* 0x0C */ 1766 U8 Parameter2; /* 0x0D */ 1767 U8 Parameter3; /* 0x0E */ 1768 U8 Parameter4; /* 0x0F */ 1769 U32 Reserved5; /* 0x10 */ 1770 U32 Reserved6; /* 0x14 */ 1771 } MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, 1772 Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; 1773 1774 /* defines for the Feature field */ 1775 #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) 1776 #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) 1777 #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */ 1778 #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) 1779 #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) /* reserved in MPI 2.0 */ 1780 #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) 1781 #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) 1782 1783 /* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ 1784 /* Parameter1 contains a PHY number */ 1785 /* Parameter2 indicates power condition action using these defines */ 1786 #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) 1787 #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) 1788 #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) 1789 /* Parameter3 and Parameter4 are reserved */ 1790 1791 /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION Feature */ 1792 /* Parameter1 contains SAS port width modulation group number */ 1793 /* Parameter2 indicates IOC action using these defines */ 1794 #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) 1795 #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) 1796 #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) 1797 /* Parameter3 indicates desired modulation level using these defines */ 1798 #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) 1799 #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) 1800 #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) 1801 #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) 1802 /* Parameter4 is reserved */ 1803 1804 /* this next set (_PCIE_LINK) is obsolete */ 1805 /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ 1806 /* Parameter1 indicates desired PCIe link speed using these defines */ 1807 #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */ 1808 #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */ 1809 #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */ 1810 /* Parameter2 indicates desired PCIe link width using these defines */ 1811 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */ 1812 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */ 1813 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */ 1814 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */ 1815 /* Parameter3 and Parameter4 are reserved */ 1816 1817 /* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ 1818 /* Parameter1 indicates desired IOC hardware clock speed using these defines */ 1819 #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) 1820 #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) 1821 #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) 1822 #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) 1823 /* Parameter2, Parameter3, and Parameter4 are reserved */ 1824 1825 /* parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature */ 1826 /* Parameter1 indicates host action regarding global power management mode */ 1827 #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) 1828 #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) 1829 #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) 1830 /* Parameter2 indicates the requested global power management mode */ 1831 #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) 1832 #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) 1833 #define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) 1834 /* Parameter3 and Parameter4 are reserved */ 1835 1836 1837 /* PowerManagementControl Reply message */ 1838 typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY 1839 { 1840 U8 Feature; /* 0x00 */ 1841 U8 Reserved1; /* 0x01 */ 1842 U8 MsgLength; /* 0x02 */ 1843 U8 Function; /* 0x03 */ 1844 U16 Reserved2; /* 0x04 */ 1845 U8 Reserved3; /* 0x06 */ 1846 U8 MsgFlags; /* 0x07 */ 1847 U8 VP_ID; /* 0x08 */ 1848 U8 VF_ID; /* 0x09 */ 1849 U16 Reserved4; /* 0x0A */ 1850 U16 Reserved5; /* 0x0C */ 1851 U16 IOCStatus; /* 0x0E */ 1852 U32 IOCLogInfo; /* 0x10 */ 1853 } MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, 1854 Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; 1855 1856 1857 #endif 1858 1859