sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

mpr: clean up empty lines in .c and .h files

Update MPI header files version to 2.00.52 from 2.00.48

Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC af

Update MPI header files version to 2.00.52 from 2.00.48

Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc

show more ...

Update mpr(4) driver from v15 to v18 from Broadcom site.

Version 16 is just a number bump, since we already had those changes.

Version 17 introduces new AdapterType value, that allows new user-spac

Update mpr(4) driver from v15 to v18 from Broadcom site.

Version 16 is just a number bump, since we already had those changes.

Version 17 introduces new AdapterType value, that allows new user-space
tools from Broadcom to differentiate adapter generations 3 and 3.5.

Version 18 updates headers and adds SAS_DEVICE_DISCOVERY_ERROR reporting.

MFC after: 2 weeks

show more ...

Merge ^/head r318380 through r318559.

Add tri-mode support (SAS/SATA/PCIe).

This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708

Add tri-mode support (SAS/SATA/PCIe).

This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708
SAS 3716

Reviewed by: ken, scottl, asomers, mav
Approved by: ken, scottl, mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10095

show more ...

Import mpr(4) driver P12 to P14 diff from vendor site.

This is mostly a version bump to stay in version number sync with firmware.
The only change there was cosmetic: Display degraded speed message

Import mpr(4) driver P12 to P14 diff from vendor site.

This is mostly a version bump to stay in version number sync with firmware.
The only change there was cosmetic: Display degraded speed message upon
receiving Active Cable Exception Event with DEGRADED reason code.

Discussed with: slm@
MFC after: 1 week

show more ...

Update MPI headers to version 42.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6096

Catch up with HEAD (r280229-r284686).

Merge ^/head r283596 through r283770.

The wrong commit message was given with r283632. This is the correct message.

- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.

- Changed all of the PCI device st

The wrong commit message was given with r283632. This is the correct message.

- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 9.255.01.00-fbsd

PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 1 week

show more ...

The wrong commit message was given with r283632. To get the correct commit
message synced to the changes in r283632, those changes are now backed out.
Another commit will be done that is exactly the

The wrong commit message was given with r283632. To get the correct commit
message synced to the changes in r283632, those changes are now backed out.
Another commit will be done that is exactly the same as r283632 except it will
have to correct commit message.

Approved by: ken, scottl, asomers, gibbs

show more ...

MFH: r282615-r283655

Sponsored by: The FreeBSD Foundation

This setting of stop_at_shutdown should have been removed with r279253

Approved by: ken
MFC after: 1 week

MFC @ r266724

An SVM update will follow this.

IFC @266473

Merge from head

Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.

This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108

Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.

This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.

Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.

o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.

o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.

Thanks to LSI for developing and testing this driver for FreeBSD.

share/man/man4/mpr.4:
mpr(4) man page.

sys/dev/mpr/*:
mpr(4) driver files.

sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.

sys/conf/files:
Add the mpr(4) driver.

sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.

sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.

sys/i386/conf/XEN:
Exclude the mpr module from building here.

Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added

show more ...