1 /*- 2 * Principal Author: Parag Patel 3 * Copyright (c) 2001 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice unmodified, this list of conditions, and the following 11 * disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Additional Copyright (c) 2001 by Traakan Software under same licence. 29 * Secondary Author: Matthew Jacob 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 /* 36 * driver for the Marvell 88E1000 series external 1000/100/10-BT PHY. 37 */ 38 39 /* 40 * Support added for the Marvell 88E1011 (Alaska) 1000/100/10baseTX and 41 * 1000baseSX PHY. 42 * Nathan Binkert <nate@openbsd.org> 43 * Jung-uk Kim <jkim@niksun.com> 44 */ 45 46 #include <sys/param.h> 47 #include <sys/systm.h> 48 #include <sys/kernel.h> 49 #include <sys/module.h> 50 #include <sys/socket.h> 51 #include <sys/bus.h> 52 53 #include <net/if.h> 54 #include <net/if_var.h> 55 #include <net/if_media.h> 56 57 #include <dev/mii/mii.h> 58 #include <dev/mii/miivar.h> 59 #include "miidevs.h" 60 61 #include <dev/mii/e1000phyreg.h> 62 63 #include "miibus_if.h" 64 65 static int e1000phy_probe(device_t); 66 static int e1000phy_attach(device_t); 67 68 static device_method_t e1000phy_methods[] = { 69 /* device interface */ 70 DEVMETHOD(device_probe, e1000phy_probe), 71 DEVMETHOD(device_attach, e1000phy_attach), 72 DEVMETHOD(device_detach, mii_phy_detach), 73 DEVMETHOD(device_shutdown, bus_generic_shutdown), 74 DEVMETHOD_END 75 }; 76 77 static devclass_t e1000phy_devclass; 78 static driver_t e1000phy_driver = { 79 "e1000phy", 80 e1000phy_methods, 81 sizeof(struct mii_softc) 82 }; 83 84 DRIVER_MODULE(e1000phy, miibus, e1000phy_driver, e1000phy_devclass, 0, 0); 85 86 static int e1000phy_service(struct mii_softc *, struct mii_data *, int); 87 static void e1000phy_status(struct mii_softc *); 88 static void e1000phy_reset(struct mii_softc *); 89 static int e1000phy_mii_phy_auto(struct mii_softc *, int); 90 91 static const struct mii_phydesc e1000phys[] = { 92 MII_PHY_DESC(MARVELL, E1000), 93 MII_PHY_DESC(MARVELL, E1011), 94 MII_PHY_DESC(MARVELL, E1000_3), 95 MII_PHY_DESC(MARVELL, E1000_5), 96 MII_PHY_DESC(MARVELL, E1111), 97 MII_PHY_DESC(xxMARVELL, E1000), 98 MII_PHY_DESC(xxMARVELL, E1011), 99 MII_PHY_DESC(xxMARVELL, E1000_3), 100 MII_PHY_DESC(xxMARVELL, E1000S), 101 MII_PHY_DESC(xxMARVELL, E1000_5), 102 MII_PHY_DESC(xxMARVELL, E1101), 103 MII_PHY_DESC(xxMARVELL, E3082), 104 MII_PHY_DESC(xxMARVELL, E1112), 105 MII_PHY_DESC(xxMARVELL, E1149), 106 MII_PHY_DESC(xxMARVELL, E1111), 107 MII_PHY_DESC(xxMARVELL, E1116), 108 MII_PHY_DESC(xxMARVELL, E1116R), 109 MII_PHY_DESC(xxMARVELL, E1116R_29), 110 MII_PHY_DESC(xxMARVELL, E1118), 111 MII_PHY_DESC(xxMARVELL, E1145), 112 MII_PHY_DESC(xxMARVELL, E1149R), 113 MII_PHY_DESC(xxMARVELL, E3016), 114 MII_PHY_DESC(xxMARVELL, PHYG65G), 115 MII_PHY_END 116 }; 117 118 static const struct mii_phy_funcs e1000phy_funcs = { 119 e1000phy_service, 120 e1000phy_status, 121 e1000phy_reset 122 }; 123 124 static int 125 e1000phy_probe(device_t dev) 126 { 127 128 return (mii_phy_dev_probe(dev, e1000phys, BUS_PROBE_DEFAULT)); 129 } 130 131 static int 132 e1000phy_attach(device_t dev) 133 { 134 struct mii_softc *sc; 135 136 sc = device_get_softc(dev); 137 138 mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &e1000phy_funcs, 0); 139 140 if (mii_dev_mac_match(dev, "msk") && 141 (sc->mii_flags & MIIF_MACPRIV0) != 0) 142 sc->mii_flags |= MIIF_PHYPRIV0; 143 144 switch (sc->mii_mpd_model) { 145 case MII_MODEL_xxMARVELL_E1011: 146 case MII_MODEL_xxMARVELL_E1112: 147 if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK) 148 sc->mii_flags |= MIIF_HAVEFIBER; 149 break; 150 case MII_MODEL_xxMARVELL_E1149: 151 case MII_MODEL_xxMARVELL_E1149R: 152 /* 153 * Some 88E1149 PHY's page select is initialized to 154 * point to other bank instead of copper/fiber bank 155 * which in turn resulted in wrong registers were 156 * accessed during PHY operation. It is believed that 157 * page 0 should be used for copper PHY so reinitialize 158 * E1000_EADR to select default copper PHY. If parent 159 * device know the type of PHY(either copper or fiber), 160 * that information should be used to select default 161 * type of PHY. 162 */ 163 PHY_WRITE(sc, E1000_EADR, 0); 164 break; 165 } 166 167 PHY_RESET(sc); 168 169 sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & sc->mii_capmask; 170 if (sc->mii_capabilities & BMSR_EXTSTAT) { 171 sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); 172 if ((sc->mii_extcapabilities & 173 (EXTSR_1000TFDX | EXTSR_1000THDX)) != 0) 174 sc->mii_flags |= MIIF_HAVE_GTCR; 175 } 176 device_printf(dev, " "); 177 mii_phy_add_media(sc); 178 printf("\n"); 179 180 MIIBUS_MEDIAINIT(sc->mii_dev); 181 return (0); 182 } 183 184 static void 185 e1000phy_reset(struct mii_softc *sc) 186 { 187 uint16_t reg, page; 188 189 reg = PHY_READ(sc, E1000_SCR); 190 if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) { 191 reg &= ~E1000_SCR_AUTO_X_MODE; 192 PHY_WRITE(sc, E1000_SCR, reg); 193 if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1112) { 194 /* Select 1000BASE-X only mode. */ 195 page = PHY_READ(sc, E1000_EADR); 196 PHY_WRITE(sc, E1000_EADR, 2); 197 reg = PHY_READ(sc, E1000_SCR); 198 reg &= ~E1000_SCR_MODE_MASK; 199 reg |= E1000_SCR_MODE_1000BX; 200 PHY_WRITE(sc, E1000_SCR, reg); 201 if ((sc->mii_flags & MIIF_PHYPRIV0) != 0) { 202 /* Set SIGDET polarity low for SFP module. */ 203 PHY_WRITE(sc, E1000_EADR, 1); 204 reg = PHY_READ(sc, E1000_SCR); 205 reg |= E1000_SCR_FIB_SIGDET_POLARITY; 206 PHY_WRITE(sc, E1000_SCR, reg); 207 } 208 PHY_WRITE(sc, E1000_EADR, page); 209 } 210 } else { 211 switch (sc->mii_mpd_model) { 212 case MII_MODEL_xxMARVELL_E1111: 213 case MII_MODEL_xxMARVELL_E1112: 214 case MII_MODEL_xxMARVELL_E1116: 215 case MII_MODEL_xxMARVELL_E1116R_29: 216 case MII_MODEL_xxMARVELL_E1118: 217 case MII_MODEL_xxMARVELL_E1149: 218 case MII_MODEL_xxMARVELL_E1149R: 219 case MII_MODEL_xxMARVELL_PHYG65G: 220 /* Disable energy detect mode. */ 221 reg &= ~E1000_SCR_EN_DETECT_MASK; 222 reg |= E1000_SCR_AUTO_X_MODE; 223 if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116 || 224 sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116R_29) 225 reg &= ~E1000_SCR_POWER_DOWN; 226 reg |= E1000_SCR_ASSERT_CRS_ON_TX; 227 break; 228 case MII_MODEL_xxMARVELL_E3082: 229 reg |= (E1000_SCR_AUTO_X_MODE >> 1); 230 reg |= E1000_SCR_ASSERT_CRS_ON_TX; 231 break; 232 case MII_MODEL_xxMARVELL_E3016: 233 reg |= E1000_SCR_AUTO_MDIX; 234 reg &= ~(E1000_SCR_EN_DETECT | 235 E1000_SCR_SCRAMBLER_DISABLE); 236 reg |= E1000_SCR_LPNP; 237 /* XXX Enable class A driver for Yukon FE+ A0. */ 238 PHY_WRITE(sc, 0x1C, PHY_READ(sc, 0x1C) | 0x0001); 239 break; 240 default: 241 reg &= ~E1000_SCR_AUTO_X_MODE; 242 reg |= E1000_SCR_ASSERT_CRS_ON_TX; 243 break; 244 } 245 if (sc->mii_mpd_model != MII_MODEL_xxMARVELL_E3016) { 246 /* Auto correction for reversed cable polarity. */ 247 reg &= ~E1000_SCR_POLARITY_REVERSAL; 248 } 249 PHY_WRITE(sc, E1000_SCR, reg); 250 251 if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116 || 252 sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116R_29 || 253 sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1149 || 254 sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1149R) { 255 PHY_WRITE(sc, E1000_EADR, 2); 256 reg = PHY_READ(sc, E1000_SCR); 257 reg |= E1000_SCR_RGMII_POWER_UP; 258 PHY_WRITE(sc, E1000_SCR, reg); 259 PHY_WRITE(sc, E1000_EADR, 0); 260 } 261 } 262 263 switch (sc->mii_mpd_model) { 264 case MII_MODEL_xxMARVELL_E3082: 265 case MII_MODEL_xxMARVELL_E1112: 266 case MII_MODEL_xxMARVELL_E1118: 267 break; 268 case MII_MODEL_xxMARVELL_E1116: 269 case MII_MODEL_xxMARVELL_E1116R_29: 270 page = PHY_READ(sc, E1000_EADR); 271 /* Select page 3, LED control register. */ 272 PHY_WRITE(sc, E1000_EADR, 3); 273 PHY_WRITE(sc, E1000_SCR, 274 E1000_SCR_LED_LOS(1) | /* Link/Act */ 275 E1000_SCR_LED_INIT(8) | /* 10Mbps */ 276 E1000_SCR_LED_STAT1(7) | /* 100Mbps */ 277 E1000_SCR_LED_STAT0(7)); /* 1000Mbps */ 278 /* Set blink rate. */ 279 PHY_WRITE(sc, E1000_IER, E1000_PULSE_DUR(E1000_PULSE_170MS) | 280 E1000_BLINK_RATE(E1000_BLINK_84MS)); 281 PHY_WRITE(sc, E1000_EADR, page); 282 break; 283 case MII_MODEL_xxMARVELL_E3016: 284 /* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */ 285 PHY_WRITE(sc, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04); 286 /* Integrated register calibration workaround. */ 287 PHY_WRITE(sc, 0x1D, 17); 288 PHY_WRITE(sc, 0x1E, 0x3F60); 289 break; 290 default: 291 /* Force TX_CLK to 25MHz clock. */ 292 reg = PHY_READ(sc, E1000_ESCR); 293 reg |= E1000_ESCR_TX_CLK_25; 294 PHY_WRITE(sc, E1000_ESCR, reg); 295 break; 296 } 297 298 /* Reset the PHY so all changes take effect. */ 299 reg = PHY_READ(sc, E1000_CR); 300 reg |= E1000_CR_RESET; 301 PHY_WRITE(sc, E1000_CR, reg); 302 } 303 304 static int 305 e1000phy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 306 { 307 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 308 uint16_t speed, gig; 309 int reg; 310 311 switch (cmd) { 312 case MII_POLLSTAT: 313 break; 314 315 case MII_MEDIACHG: 316 if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) { 317 e1000phy_mii_phy_auto(sc, ife->ifm_media); 318 break; 319 } 320 321 speed = 0; 322 switch (IFM_SUBTYPE(ife->ifm_media)) { 323 case IFM_1000_T: 324 if ((sc->mii_flags & MIIF_HAVE_GTCR) == 0) 325 return (EINVAL); 326 speed = E1000_CR_SPEED_1000; 327 break; 328 case IFM_1000_SX: 329 if ((sc->mii_extcapabilities & 330 (EXTSR_1000XFDX | EXTSR_1000XHDX)) == 0) 331 return (EINVAL); 332 speed = E1000_CR_SPEED_1000; 333 break; 334 case IFM_100_TX: 335 speed = E1000_CR_SPEED_100; 336 break; 337 case IFM_10_T: 338 speed = E1000_CR_SPEED_10; 339 break; 340 case IFM_NONE: 341 reg = PHY_READ(sc, E1000_CR); 342 PHY_WRITE(sc, E1000_CR, 343 reg | E1000_CR_ISOLATE | E1000_CR_POWER_DOWN); 344 goto done; 345 default: 346 return (EINVAL); 347 } 348 349 if ((ife->ifm_media & IFM_FDX) != 0) { 350 speed |= E1000_CR_FULL_DUPLEX; 351 gig = E1000_1GCR_1000T_FD; 352 } else 353 gig = E1000_1GCR_1000T; 354 355 reg = PHY_READ(sc, E1000_CR); 356 reg &= ~E1000_CR_AUTO_NEG_ENABLE; 357 PHY_WRITE(sc, E1000_CR, reg | E1000_CR_RESET); 358 359 if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) { 360 gig |= E1000_1GCR_MS_ENABLE; 361 if ((ife->ifm_media & IFM_ETH_MASTER) != 0) 362 gig |= E1000_1GCR_MS_VALUE; 363 } else if ((sc->mii_flags & MIIF_HAVE_GTCR) != 0) 364 gig = 0; 365 PHY_WRITE(sc, E1000_1GCR, gig); 366 PHY_WRITE(sc, E1000_AR, E1000_AR_SELECTOR_FIELD); 367 PHY_WRITE(sc, E1000_CR, speed | E1000_CR_RESET); 368 done: 369 break; 370 case MII_TICK: 371 /* 372 * Only used for autonegotiation. 373 */ 374 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) { 375 sc->mii_ticks = 0; 376 break; 377 } 378 379 /* 380 * check for link. 381 * Read the status register twice; BMSR_LINK is latch-low. 382 */ 383 reg = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); 384 if (reg & BMSR_LINK) { 385 sc->mii_ticks = 0; 386 break; 387 } 388 389 /* Announce link loss right after it happens. */ 390 if (sc->mii_ticks++ == 0) 391 break; 392 if (sc->mii_ticks <= sc->mii_anegticks) 393 break; 394 395 sc->mii_ticks = 0; 396 PHY_RESET(sc); 397 e1000phy_mii_phy_auto(sc, ife->ifm_media); 398 break; 399 } 400 401 /* Update the media status. */ 402 PHY_STATUS(sc); 403 404 /* Callback if something changed. */ 405 mii_phy_update(sc, cmd); 406 return (0); 407 } 408 409 static void 410 e1000phy_status(struct mii_softc *sc) 411 { 412 struct mii_data *mii = sc->mii_pdata; 413 int bmcr, bmsr, ssr; 414 415 mii->mii_media_status = IFM_AVALID; 416 mii->mii_media_active = IFM_ETHER; 417 418 bmsr = PHY_READ(sc, E1000_SR) | PHY_READ(sc, E1000_SR); 419 bmcr = PHY_READ(sc, E1000_CR); 420 ssr = PHY_READ(sc, E1000_SSR); 421 422 if (bmsr & E1000_SR_LINK_STATUS) 423 mii->mii_media_status |= IFM_ACTIVE; 424 425 if (bmcr & E1000_CR_LOOPBACK) 426 mii->mii_media_active |= IFM_LOOP; 427 428 if ((bmcr & E1000_CR_AUTO_NEG_ENABLE) != 0 && 429 (ssr & E1000_SSR_SPD_DPLX_RESOLVED) == 0) { 430 /* Erg, still trying, I guess... */ 431 mii->mii_media_active |= IFM_NONE; 432 return; 433 } 434 435 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { 436 switch (ssr & E1000_SSR_SPEED) { 437 case E1000_SSR_1000MBS: 438 mii->mii_media_active |= IFM_1000_T; 439 break; 440 case E1000_SSR_100MBS: 441 mii->mii_media_active |= IFM_100_TX; 442 break; 443 case E1000_SSR_10MBS: 444 mii->mii_media_active |= IFM_10_T; 445 break; 446 default: 447 mii->mii_media_active |= IFM_NONE; 448 return; 449 } 450 } else { 451 /* 452 * Some fiber PHY(88E1112) does not seem to set resolved 453 * speed so always assume we've got IFM_1000_SX. 454 */ 455 mii->mii_media_active |= IFM_1000_SX; 456 } 457 458 if (ssr & E1000_SSR_DUPLEX) { 459 mii->mii_media_active |= IFM_FDX; 460 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) 461 mii->mii_media_active |= mii_phy_flowstatus(sc); 462 } else 463 mii->mii_media_active |= IFM_HDX; 464 465 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) { 466 if (((PHY_READ(sc, E1000_1GSR) | PHY_READ(sc, E1000_1GSR)) & 467 E1000_1GSR_MS_CONFIG_RES) != 0) 468 mii->mii_media_active |= IFM_ETH_MASTER; 469 } 470 } 471 472 static int 473 e1000phy_mii_phy_auto(struct mii_softc *sc, int media) 474 { 475 uint16_t reg; 476 477 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { 478 reg = PHY_READ(sc, E1000_AR); 479 reg &= ~(E1000_AR_PAUSE | E1000_AR_ASM_DIR); 480 reg |= E1000_AR_10T | E1000_AR_10T_FD | 481 E1000_AR_100TX | E1000_AR_100TX_FD; 482 if ((media & IFM_FLOW) != 0 || 483 (sc->mii_flags & MIIF_FORCEPAUSE) != 0) 484 reg |= E1000_AR_PAUSE | E1000_AR_ASM_DIR; 485 PHY_WRITE(sc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD); 486 } else 487 PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X); 488 if ((sc->mii_flags & MIIF_HAVE_GTCR) != 0) { 489 reg = 0; 490 if ((sc->mii_extcapabilities & EXTSR_1000TFDX) != 0) 491 reg |= E1000_1GCR_1000T_FD; 492 if ((sc->mii_extcapabilities & EXTSR_1000THDX) != 0) 493 reg |= E1000_1GCR_1000T; 494 PHY_WRITE(sc, E1000_1GCR, reg); 495 } 496 PHY_WRITE(sc, E1000_CR, 497 E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); 498 499 return (EJUSTRETURN); 500 } 501