1 /****************************************************************************** 2 3 Copyright (c) 2001-2012, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 36 #include "ixgbe_api.h" 37 #include "ixgbe_type.h" 38 #include "ixgbe_vf.h" 39 40 #ifndef IXGBE_VFWRITE_REG 41 #define IXGBE_VFWRITE_REG IXGBE_WRITE_REG 42 #endif 43 #ifndef IXGBE_VFREAD_REG 44 #define IXGBE_VFREAD_REG IXGBE_READ_REG 45 #endif 46 47 /** 48 * ixgbe_init_ops_vf - Initialize the pointers for vf 49 * @hw: pointer to hardware structure 50 * 51 * This will assign function pointers, adapter-specific functions can 52 * override the assignment of generic function pointers by assigning 53 * their own adapter-specific function pointers. 54 * Does not touch the hardware. 55 **/ 56 s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw) 57 { 58 /* MAC */ 59 hw->mac.ops.init_hw = ixgbe_init_hw_vf; 60 hw->mac.ops.reset_hw = ixgbe_reset_hw_vf; 61 hw->mac.ops.start_hw = ixgbe_start_hw_vf; 62 /* Cannot clear stats on VF */ 63 hw->mac.ops.clear_hw_cntrs = NULL; 64 hw->mac.ops.get_media_type = NULL; 65 hw->mac.ops.get_mac_addr = ixgbe_get_mac_addr_vf; 66 hw->mac.ops.stop_adapter = ixgbe_stop_adapter_vf; 67 hw->mac.ops.get_bus_info = NULL; 68 69 /* Link */ 70 hw->mac.ops.setup_link = ixgbe_setup_mac_link_vf; 71 hw->mac.ops.check_link = ixgbe_check_mac_link_vf; 72 hw->mac.ops.get_link_capabilities = NULL; 73 74 /* RAR, Multicast, VLAN */ 75 hw->mac.ops.set_rar = ixgbe_set_rar_vf; 76 hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf; 77 hw->mac.ops.init_rx_addrs = NULL; 78 hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf; 79 hw->mac.ops.enable_mc = NULL; 80 hw->mac.ops.disable_mc = NULL; 81 hw->mac.ops.clear_vfta = NULL; 82 hw->mac.ops.set_vfta = ixgbe_set_vfta_vf; 83 84 hw->mac.max_tx_queues = 1; 85 hw->mac.max_rx_queues = 1; 86 87 hw->mbx.ops.init_params = ixgbe_init_mbx_params_vf; 88 89 return IXGBE_SUCCESS; 90 } 91 92 /** 93 * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx 94 * @hw: pointer to hardware structure 95 * 96 * Starts the hardware by filling the bus info structure and media type, clears 97 * all on chip counters, initializes receive address registers, multicast 98 * table, VLAN filter table, calls routine to set up link and flow control 99 * settings, and leaves transmit and receive units disabled and uninitialized 100 **/ 101 s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw) 102 { 103 /* Clear adapter stopped flag */ 104 hw->adapter_stopped = FALSE; 105 106 return IXGBE_SUCCESS; 107 } 108 109 /** 110 * ixgbe_init_hw_vf - virtual function hardware initialization 111 * @hw: pointer to hardware structure 112 * 113 * Initialize the hardware by resetting the hardware and then starting 114 * the hardware 115 **/ 116 s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw) 117 { 118 s32 status = hw->mac.ops.start_hw(hw); 119 120 hw->mac.ops.get_mac_addr(hw, hw->mac.addr); 121 122 return status; 123 } 124 125 /** 126 * ixgbe_reset_hw_vf - Performs hardware reset 127 * @hw: pointer to hardware structure 128 * 129 * Resets the hardware by reseting the transmit and receive units, masks and 130 * clears all interrupts. 131 **/ 132 s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw) 133 { 134 struct ixgbe_mbx_info *mbx = &hw->mbx; 135 u32 timeout = IXGBE_VF_INIT_TIMEOUT; 136 s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR; 137 u32 ctrl, msgbuf[IXGBE_VF_PERMADDR_MSG_LEN]; 138 u8 *addr = (u8 *)(&msgbuf[1]); 139 140 DEBUGFUNC("ixgbevf_reset_hw_vf"); 141 142 /* Call adapter stop to disable tx/rx and clear interrupts */ 143 hw->mac.ops.stop_adapter(hw); 144 145 DEBUGOUT("Issuing a function level reset to MAC\n"); 146 147 ctrl = IXGBE_VFREAD_REG(hw, IXGBE_VFCTRL) | IXGBE_CTRL_RST; 148 IXGBE_VFWRITE_REG(hw, IXGBE_VFCTRL, ctrl); 149 IXGBE_WRITE_FLUSH(hw); 150 151 msec_delay(50); 152 153 /* we cannot reset while the RSTI / RSTD bits are asserted */ 154 while (!mbx->ops.check_for_rst(hw, 0) && timeout) { 155 timeout--; 156 usec_delay(5); 157 } 158 159 if (timeout) { 160 /* mailbox timeout can now become active */ 161 mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT; 162 163 msgbuf[0] = IXGBE_VF_RESET; 164 mbx->ops.write_posted(hw, msgbuf, 1, 0); 165 166 msec_delay(10); 167 168 /* 169 * set our "perm_addr" based on info provided by PF 170 * also set up the mc_filter_type which is piggy backed 171 * on the mac address in word 3 172 */ 173 ret_val = mbx->ops.read_posted(hw, msgbuf, 174 IXGBE_VF_PERMADDR_MSG_LEN, 0); 175 if (!ret_val) { 176 if (msgbuf[0] == (IXGBE_VF_RESET | 177 IXGBE_VT_MSGTYPE_ACK)) { 178 memcpy(hw->mac.perm_addr, addr, 179 IXGBE_ETH_LENGTH_OF_ADDRESS); 180 hw->mac.mc_filter_type = 181 msgbuf[IXGBE_VF_MC_TYPE_WORD]; 182 } else { 183 ret_val = IXGBE_ERR_INVALID_MAC_ADDR; 184 } 185 } 186 } 187 188 return ret_val; 189 } 190 191 /** 192 * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units 193 * @hw: pointer to hardware structure 194 * 195 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, 196 * disables transmit and receive units. The adapter_stopped flag is used by 197 * the shared code and drivers to determine if the adapter is in a stopped 198 * state and should not touch the hardware. 199 **/ 200 s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw) 201 { 202 u32 reg_val; 203 u16 i; 204 205 /* 206 * Set the adapter_stopped flag so other driver functions stop touching 207 * the hardware 208 */ 209 hw->adapter_stopped = TRUE; 210 211 /* Clear interrupt mask to stop from interrupts being generated */ 212 IXGBE_VFWRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK); 213 214 /* Clear any pending interrupts, flush previous writes */ 215 IXGBE_VFREAD_REG(hw, IXGBE_VTEICR); 216 217 /* Disable the transmit unit. Each queue must be disabled. */ 218 for (i = 0; i < hw->mac.max_tx_queues; i++) 219 IXGBE_VFWRITE_REG(hw, IXGBE_VFTXDCTL(i), IXGBE_TXDCTL_SWFLSH); 220 221 /* Disable the receive unit by stopping each queue */ 222 for (i = 0; i < hw->mac.max_rx_queues; i++) { 223 reg_val = IXGBE_VFREAD_REG(hw, IXGBE_VFRXDCTL(i)); 224 reg_val &= ~IXGBE_RXDCTL_ENABLE; 225 IXGBE_VFWRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val); 226 } 227 228 /* flush all queues disables */ 229 IXGBE_WRITE_FLUSH(hw); 230 msec_delay(2); 231 232 return IXGBE_SUCCESS; 233 } 234 235 /** 236 * ixgbe_mta_vector - Determines bit-vector in multicast table to set 237 * @hw: pointer to hardware structure 238 * @mc_addr: the multicast address 239 * 240 * Extracts the 12 bits, from a multicast address, to determine which 241 * bit-vector to set in the multicast table. The hardware uses 12 bits, from 242 * incoming rx multicast addresses, to determine the bit-vector to check in 243 * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set 244 * by the MO field of the MCSTCTRL. The MO field is set during initialization 245 * to mc_filter_type. 246 **/ 247 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) 248 { 249 u32 vector = 0; 250 251 switch (hw->mac.mc_filter_type) { 252 case 0: /* use bits [47:36] of the address */ 253 vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); 254 break; 255 case 1: /* use bits [46:35] of the address */ 256 vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); 257 break; 258 case 2: /* use bits [45:34] of the address */ 259 vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); 260 break; 261 case 3: /* use bits [43:32] of the address */ 262 vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); 263 break; 264 default: /* Invalid mc_filter_type */ 265 DEBUGOUT("MC filter type param set incorrectly\n"); 266 ASSERT(0); 267 break; 268 } 269 270 /* vector can only be 12-bits or boundary will be exceeded */ 271 vector &= 0xFFF; 272 return vector; 273 } 274 275 /** 276 * ixgbe_set_rar_vf - set device MAC address 277 * @hw: pointer to hardware structure 278 * @index: Receive address register to write 279 * @addr: Address to put into receive address register 280 * @vmdq: VMDq "set" or "pool" index 281 * @enable_addr: set flag that address is active 282 **/ 283 s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, 284 u32 enable_addr) 285 { 286 struct ixgbe_mbx_info *mbx = &hw->mbx; 287 u32 msgbuf[3]; 288 u8 *msg_addr = (u8 *)(&msgbuf[1]); 289 s32 ret_val; 290 UNREFERENCED_3PARAMETER(vmdq, enable_addr, index); 291 292 memset(msgbuf, 0, 12); 293 msgbuf[0] = IXGBE_VF_SET_MAC_ADDR; 294 memcpy(msg_addr, addr, 6); 295 ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0); 296 297 if (!ret_val) 298 ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); 299 300 msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS; 301 302 /* if nacked the address was rejected, use "perm_addr" */ 303 if (!ret_val && 304 (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK))) 305 ixgbe_get_mac_addr_vf(hw, hw->mac.addr); 306 307 return ret_val; 308 } 309 310 /** 311 * ixgbe_update_mc_addr_list_vf - Update Multicast addresses 312 * @hw: pointer to the HW structure 313 * @mc_addr_list: array of multicast addresses to program 314 * @mc_addr_count: number of multicast addresses to program 315 * @next: caller supplied function to return next address in list 316 * 317 * Updates the Multicast Table Array. 318 **/ 319 s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list, 320 u32 mc_addr_count, ixgbe_mc_addr_itr next, 321 bool clear) 322 { 323 struct ixgbe_mbx_info *mbx = &hw->mbx; 324 u32 msgbuf[IXGBE_VFMAILBOX_SIZE]; 325 u16 *vector_list = (u16 *)&msgbuf[1]; 326 u32 vector; 327 u32 cnt, i; 328 u32 vmdq; 329 330 UNREFERENCED_1PARAMETER(clear); 331 332 DEBUGFUNC("ixgbe_update_mc_addr_list_vf"); 333 334 /* Each entry in the list uses 1 16 bit word. We have 30 335 * 16 bit words available in our HW msg buffer (minus 1 for the 336 * msg type). That's 30 hash values if we pack 'em right. If 337 * there are more than 30 MC addresses to add then punt the 338 * extras for now and then add code to handle more than 30 later. 339 * It would be unusual for a server to request that many multi-cast 340 * addresses except for in large enterprise network environments. 341 */ 342 343 DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count); 344 345 cnt = (mc_addr_count > 30) ? 30 : mc_addr_count; 346 msgbuf[0] = IXGBE_VF_SET_MULTICAST; 347 msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT; 348 349 for (i = 0; i < cnt; i++) { 350 vector = ixgbe_mta_vector(hw, next(hw, &mc_addr_list, &vmdq)); 351 DEBUGOUT1("Hash value = 0x%03X\n", vector); 352 vector_list[i] = (u16)vector; 353 } 354 355 return mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE, 0); 356 } 357 358 /** 359 * ixgbe_set_vfta_vf - Set/Unset vlan filter table address 360 * @hw: pointer to the HW structure 361 * @vlan: 12 bit VLAN ID 362 * @vind: unused by VF drivers 363 * @vlan_on: if TRUE then set bit, else clear bit 364 **/ 365 s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) 366 { 367 struct ixgbe_mbx_info *mbx = &hw->mbx; 368 u32 msgbuf[2]; 369 UNREFERENCED_1PARAMETER(vind); 370 371 msgbuf[0] = IXGBE_VF_SET_VLAN; 372 msgbuf[1] = vlan; 373 /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */ 374 msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT; 375 376 return mbx->ops.write_posted(hw, msgbuf, 2, 0); 377 } 378 379 /** 380 * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues 381 * @hw: pointer to hardware structure 382 * 383 * Returns the number of transmit queues for the given adapter. 384 **/ 385 u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw) 386 { 387 UNREFERENCED_1PARAMETER(hw); 388 return IXGBE_VF_MAX_TX_QUEUES; 389 } 390 391 /** 392 * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues 393 * @hw: pointer to hardware structure 394 * 395 * Returns the number of receive queues for the given adapter. 396 **/ 397 u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw) 398 { 399 UNREFERENCED_1PARAMETER(hw); 400 return IXGBE_VF_MAX_RX_QUEUES; 401 } 402 403 /** 404 * ixgbe_get_mac_addr_vf - Read device MAC address 405 * @hw: pointer to the HW structure 406 **/ 407 s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr) 408 { 409 int i; 410 411 for (i = 0; i < IXGBE_ETH_LENGTH_OF_ADDRESS; i++) 412 mac_addr[i] = hw->mac.perm_addr[i]; 413 414 return IXGBE_SUCCESS; 415 } 416 417 s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr) 418 { 419 struct ixgbe_mbx_info *mbx = &hw->mbx; 420 u32 msgbuf[3]; 421 u8 *msg_addr = (u8 *)(&msgbuf[1]); 422 s32 ret_val; 423 424 memset(msgbuf, 0, sizeof(msgbuf)); 425 /* 426 * If index is one then this is the start of a new list and needs 427 * indication to the PF so it can do it's own list management. 428 * If it is zero then that tells the PF to just clear all of 429 * this VF's macvlans and there is no new list. 430 */ 431 msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT; 432 msgbuf[0] |= IXGBE_VF_SET_MACVLAN; 433 if (addr) 434 memcpy(msg_addr, addr, 6); 435 ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0); 436 437 if (!ret_val) 438 ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); 439 440 msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS; 441 442 if (!ret_val) 443 if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK)) 444 ret_val = IXGBE_ERR_OUT_OF_MEM; 445 446 return ret_val; 447 } 448 449 /** 450 * ixgbe_setup_mac_link_vf - Setup MAC link settings 451 * @hw: pointer to hardware structure 452 * @speed: new link speed 453 * @autoneg: TRUE if autonegotiation enabled 454 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 455 * 456 * Set the link speed in the AUTOC register and restarts link. 457 **/ 458 s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, 459 ixgbe_link_speed speed, bool autoneg, 460 bool autoneg_wait_to_complete) 461 { 462 UNREFERENCED_4PARAMETER(hw, speed, autoneg, autoneg_wait_to_complete); 463 return IXGBE_SUCCESS; 464 } 465 466 /** 467 * ixgbe_check_mac_link_vf - Get link/speed status 468 * @hw: pointer to hardware structure 469 * @speed: pointer to link speed 470 * @link_up: TRUE is link is up, FALSE otherwise 471 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 472 * 473 * Reads the links register to determine if link is up and the current speed 474 **/ 475 s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 476 bool *link_up, bool autoneg_wait_to_complete) 477 { 478 u32 links_reg; 479 UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); 480 481 if (!(hw->mbx.ops.check_for_rst(hw, 0))) { 482 *link_up = FALSE; 483 *speed = 0; 484 return -1; 485 } 486 487 links_reg = IXGBE_VFREAD_REG(hw, IXGBE_VFLINKS); 488 489 if (links_reg & IXGBE_LINKS_UP) 490 *link_up = TRUE; 491 else 492 *link_up = FALSE; 493 494 if ((links_reg & IXGBE_LINKS_SPEED_10G_82599) == 495 IXGBE_LINKS_SPEED_10G_82599) 496 *speed = IXGBE_LINK_SPEED_10GB_FULL; 497 else 498 *speed = IXGBE_LINK_SPEED_1GB_FULL; 499 500 return IXGBE_SUCCESS; 501 } 502 503