1 /*- 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 */ 34 35 /* 36 * 21143 and clone common register definitions. 37 */ 38 39 #define DC_BUSCTL 0x00 /* bus control */ 40 #define DC_TXSTART 0x08 /* tx start demand */ 41 #define DC_RXSTART 0x10 /* rx start demand */ 42 #define DC_RXADDR 0x18 /* rx descriptor list start addr */ 43 #define DC_TXADDR 0x20 /* tx descriptor list start addr */ 44 #define DC_ISR 0x28 /* interrupt status register */ 45 #define DC_NETCFG 0x30 /* network config register */ 46 #define DC_IMR 0x38 /* interrupt mask */ 47 #define DC_FRAMESDISCARDED 0x40 /* # of discarded frames */ 48 #define DC_SIO 0x48 /* MII and ROM/EEPROM access */ 49 #define DC_ROM 0x50 /* ROM programming address */ 50 #define DC_TIMER 0x58 /* general timer */ 51 #define DC_10BTSTAT 0x60 /* SIA status */ 52 #define DC_SIARESET 0x68 /* SIA connectivity */ 53 #define DC_10BTCTRL 0x70 /* SIA transmit and receive */ 54 #define DC_WATCHDOG 0x78 /* SIA and general purpose port */ 55 #define DC_SIAGP 0x78 /* SIA and general purpose port (X3201) */ 56 57 /* 58 * There are two general 'types' of MX chips that we need to be 59 * concerned with. One is the original 98713, which has its internal 60 * NWAY support controlled via the MDIO bits in the serial I/O 61 * register. The other is everything else (from the 98713A on up), 62 * which has its internal NWAY controlled via CSR13, CSR14 and CSR15, 63 * just like the 21143. This type setting also governs which of the 64 * 'magic' numbers we write to CSR16. The PNIC II falls into the 65 * 98713A/98715/98715A/98725 category. 66 */ 67 #define DC_TYPE_98713 0x1 68 #define DC_TYPE_98713A 0x2 69 #define DC_TYPE_987x5 0x3 70 71 /* Other type of supported chips. */ 72 #define DC_TYPE_21143 0x4 /* Intel 21143 */ 73 #define DC_TYPE_ASIX 0x5 /* ASIX AX88140A/AX88141 */ 74 #define DC_TYPE_AL981 0x6 /* ADMtek AL981 Comet */ 75 #define DC_TYPE_AN985 0x7 /* ADMtek AN985 Centaur */ 76 #define DC_TYPE_DM9102 0x8 /* Davicom DM9102 */ 77 #define DC_TYPE_PNICII 0x9 /* 82c115 PNIC II */ 78 #define DC_TYPE_PNIC 0xA /* 82c168/82c169 PNIC I */ 79 #define DC_TYPE_XIRCOM 0xB /* Xircom X3201 */ 80 #define DC_TYPE_CONEXANT 0xC /* Conexant LANfinity RS7112 */ 81 82 #define DC_IS_MACRONIX(x) \ 83 (x->dc_type == DC_TYPE_98713 || \ 84 x->dc_type == DC_TYPE_98713A || \ 85 x->dc_type == DC_TYPE_987x5) 86 87 #define DC_IS_ADMTEK(x) \ 88 (x->dc_type == DC_TYPE_AL981 || \ 89 x->dc_type == DC_TYPE_AN985) 90 91 #define DC_IS_INTEL(x) (x->dc_type == DC_TYPE_21143) 92 #define DC_IS_ASIX(x) (x->dc_type == DC_TYPE_ASIX) 93 #define DC_IS_COMET(x) (x->dc_type == DC_TYPE_AL981) 94 #define DC_IS_CENTAUR(x) (x->dc_type == DC_TYPE_AN985) 95 #define DC_IS_DAVICOM(x) (x->dc_type == DC_TYPE_DM9102) 96 #define DC_IS_PNICII(x) (x->dc_type == DC_TYPE_PNICII) 97 #define DC_IS_PNIC(x) (x->dc_type == DC_TYPE_PNIC) 98 #define DC_IS_XIRCOM(x) (x->dc_type == DC_TYPE_XIRCOM) 99 #define DC_IS_CONEXANT(x) (x->dc_type == DC_TYPE_CONEXANT) 100 101 /* MII/symbol mode port types */ 102 #define DC_PMODE_MII 0x1 103 #define DC_PMODE_SYM 0x2 104 #define DC_PMODE_SIA 0x3 105 106 /* 107 * Bus control bits. 108 */ 109 #define DC_BUSCTL_RESET 0x00000001 110 #define DC_BUSCTL_ARBITRATION 0x00000002 111 #define DC_BUSCTL_SKIPLEN 0x0000007C 112 #define DC_BUSCTL_BUF_BIGENDIAN 0x00000080 113 #define DC_BUSCTL_BURSTLEN 0x00003F00 114 #define DC_BUSCTL_CACHEALIGN 0x0000C000 115 #define DC_BUSCTL_TXPOLL 0x000E0000 116 #define DC_BUSCTL_DBO 0x00100000 117 #define DC_BUSCTL_MRME 0x00200000 118 #define DC_BUSCTL_MRLE 0x00800000 119 #define DC_BUSCTL_MWIE 0x01000000 120 #define DC_BUSCTL_ONNOW_ENB 0x04000000 121 122 #define DC_SKIPLEN_1LONG 0x00000004 123 #define DC_SKIPLEN_2LONG 0x00000008 124 #define DC_SKIPLEN_3LONG 0x00000010 125 #define DC_SKIPLEN_4LONG 0x00000020 126 #define DC_SKIPLEN_5LONG 0x00000040 127 128 #define DC_CACHEALIGN_NONE 0x00000000 129 #define DC_CACHEALIGN_8LONG 0x00004000 130 #define DC_CACHEALIGN_16LONG 0x00008000 131 #define DC_CACHEALIGN_32LONG 0x0000C000 132 133 #define DC_BURSTLEN_USECA 0x00000000 134 #define DC_BURSTLEN_1LONG 0x00000100 135 #define DC_BURSTLEN_2LONG 0x00000200 136 #define DC_BURSTLEN_4LONG 0x00000400 137 #define DC_BURSTLEN_8LONG 0x00000800 138 #define DC_BURSTLEN_16LONG 0x00001000 139 #define DC_BURSTLEN_32LONG 0x00002000 140 141 #define DC_TXPOLL_OFF 0x00000000 142 #define DC_TXPOLL_1 0x00020000 143 #define DC_TXPOLL_2 0x00040000 144 #define DC_TXPOLL_3 0x00060000 145 #define DC_TXPOLL_4 0x00080000 146 #define DC_TXPOLL_5 0x000A0000 147 #define DC_TXPOLL_6 0x000C0000 148 #define DC_TXPOLL_7 0x000E0000 149 150 /* 151 * Interrupt status bits. 152 */ 153 #define DC_ISR_TX_OK 0x00000001 154 #define DC_ISR_TX_IDLE 0x00000002 155 #define DC_ISR_TX_NOBUF 0x00000004 156 #define DC_ISR_TX_JABBERTIMEO 0x00000008 157 #define DC_ISR_LINKGOOD 0x00000010 158 #define DC_ISR_TX_UNDERRUN 0x00000020 159 #define DC_ISR_RX_OK 0x00000040 160 #define DC_ISR_RX_NOBUF 0x00000080 161 #define DC_ISR_RX_READ 0x00000100 162 #define DC_ISR_RX_WATDOGTIMEO 0x00000200 163 #define DC_ISR_TX_EARLY 0x00000400 164 #define DC_ISR_TIMER_EXPIRED 0x00000800 165 #define DC_ISR_LINKFAIL 0x00001000 166 #define DC_ISR_BUS_ERR 0x00002000 167 #define DC_ISR_RX_EARLY 0x00004000 168 #define DC_ISR_ABNORMAL 0x00008000 169 #define DC_ISR_NORMAL 0x00010000 170 #define DC_ISR_RX_STATE 0x000E0000 171 #define DC_ISR_TX_STATE 0x00700000 172 #define DC_ISR_BUSERRTYPE 0x03800000 173 #define DC_ISR_100MBPSLINK 0x08000000 174 #define DC_ISR_MAGICKPACK 0x10000000 175 176 #define DC_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */ 177 #define DC_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */ 178 #define DC_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */ 179 #define DC_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */ 180 #define DC_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */ 181 #define DC_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */ 182 #define DC_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */ 183 #define DC_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */ 184 185 #define DC_TXSTATE_RESET 0x00000000 /* 000 - reset */ 186 #define DC_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */ 187 #define DC_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */ 188 #define DC_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */ 189 #define DC_TXSTATE_RSVD 0x00400000 /* 100 - reserved */ 190 #define DC_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */ 191 #define DC_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */ 192 #define DC_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */ 193 194 /* 195 * Network config bits. 196 */ 197 #define DC_NETCFG_RX_HASHPERF 0x00000001 198 #define DC_NETCFG_RX_ON 0x00000002 199 #define DC_NETCFG_RX_HASHONLY 0x00000004 200 #define DC_NETCFG_RX_BADFRAMES 0x00000008 201 #define DC_NETCFG_RX_INVFILT 0x00000010 202 #define DC_NETCFG_BACKOFFCNT 0x00000020 203 #define DC_NETCFG_RX_PROMISC 0x00000040 204 #define DC_NETCFG_RX_ALLMULTI 0x00000080 205 #define DC_NETCFG_FULLDUPLEX 0x00000200 206 #define DC_NETCFG_LOOPBACK 0x00000C00 207 #define DC_NETCFG_FORCECOLL 0x00001000 208 #define DC_NETCFG_TX_ON 0x00002000 209 #define DC_NETCFG_TX_THRESH 0x0000C000 210 #define DC_NETCFG_TX_BACKOFF 0x00020000 211 #define DC_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */ 212 #define DC_NETCFG_HEARTBEAT 0x00080000 213 #define DC_NETCFG_STORENFWD 0x00200000 214 #define DC_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */ 215 #define DC_NETCFG_PCS 0x00800000 216 #define DC_NETCFG_SCRAMBLER 0x01000000 217 #define DC_NETCFG_NO_RXCRC 0x02000000 218 #define DC_NETCFG_RX_ALL 0x40000000 219 #define DC_NETCFG_CAPEFFECT 0x80000000 220 221 #define DC_OPMODE_NORM 0x00000000 222 #define DC_OPMODE_INTLOOP 0x00000400 223 #define DC_OPMODE_EXTLOOP 0x00000800 224 225 #if 0 226 #define DC_TXTHRESH_72BYTES 0x00000000 227 #define DC_TXTHRESH_96BYTES 0x00004000 228 #define DC_TXTHRESH_128BYTES 0x00008000 229 #define DC_TXTHRESH_160BYTES 0x0000C000 230 #endif 231 232 #define DC_TXTHRESH_MIN 0x00000000 233 #define DC_TXTHRESH_INC 0x00004000 234 #define DC_TXTHRESH_MAX 0x0000C000 235 236 237 /* 238 * Interrupt mask bits. 239 */ 240 #define DC_IMR_TX_OK 0x00000001 241 #define DC_IMR_TX_IDLE 0x00000002 242 #define DC_IMR_TX_NOBUF 0x00000004 243 #define DC_IMR_TX_JABBERTIMEO 0x00000008 244 #define DC_IMR_LINKGOOD 0x00000010 245 #define DC_IMR_TX_UNDERRUN 0x00000020 246 #define DC_IMR_RX_OK 0x00000040 247 #define DC_IMR_RX_NOBUF 0x00000080 248 #define DC_IMR_RX_READ 0x00000100 249 #define DC_IMR_RX_WATDOGTIMEO 0x00000200 250 #define DC_IMR_TX_EARLY 0x00000400 251 #define DC_IMR_TIMER_EXPIRED 0x00000800 252 #define DC_IMR_LINKFAIL 0x00001000 253 #define DC_IMR_BUS_ERR 0x00002000 254 #define DC_IMR_RX_EARLY 0x00004000 255 #define DC_IMR_ABNORMAL 0x00008000 256 #define DC_IMR_NORMAL 0x00010000 257 #define DC_IMR_100MBPSLINK 0x08000000 258 #define DC_IMR_MAGICKPACK 0x10000000 259 260 #define DC_INTRS \ 261 (DC_IMR_RX_OK|DC_IMR_TX_OK|DC_IMR_RX_NOBUF|DC_IMR_RX_WATDOGTIMEO|\ 262 DC_IMR_TX_NOBUF|DC_IMR_TX_UNDERRUN|DC_IMR_BUS_ERR| \ 263 DC_IMR_ABNORMAL|DC_IMR_NORMAL/*|DC_IMR_TX_EARLY*/) 264 /* 265 * Serial I/O (EEPROM/ROM) bits. 266 */ 267 #define DC_SIO_EE_CS 0x00000001 /* EEPROM chip select */ 268 #define DC_SIO_EE_CLK 0x00000002 /* EEPROM clock */ 269 #define DC_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */ 270 #define DC_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */ 271 #define DC_SIO_ROMDATA4 0x00000010 272 #define DC_SIO_ROMDATA5 0x00000020 273 #define DC_SIO_ROMDATA6 0x00000040 274 #define DC_SIO_ROMDATA7 0x00000080 275 #define DC_SIO_EESEL 0x00000800 276 #define DC_SIO_ROMSEL 0x00001000 277 #define DC_SIO_ROMCTL_WRITE 0x00002000 278 #define DC_SIO_ROMCTL_READ 0x00004000 279 #define DC_SIO_MII_CLK 0x00010000 /* MDIO clock */ 280 #define DC_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */ 281 #define DC_SIO_MII_DIR 0x00040000 /* MDIO dir */ 282 #define DC_SIO_MII_DATAIN 0x00080000 /* MDIO data in */ 283 284 #define DC_EECMD_WRITE 0x140 285 #define DC_EECMD_READ 0x180 286 #define DC_EECMD_ERASE 0x1c0 287 288 #define DC_EE_NODEADDR_OFFSET 0x70 289 #define DC_EE_NODEADDR 10 290 291 /* 292 * General purpose timer register 293 */ 294 #define DC_TIMER_VALUE 0x0000FFFF 295 #define DC_TIMER_CONTINUOUS 0x00010000 296 297 /* 298 * 10baseT status register 299 */ 300 #define DC_TSTAT_MIIACT 0x00000001 /* MII port activity */ 301 #define DC_TSTAT_LS100 0x00000002 /* link status of 100baseTX */ 302 #define DC_TSTAT_LS10 0x00000004 /* link status of 10baseT */ 303 #define DC_TSTAT_AUTOPOLARITY 0x00000008 304 #define DC_TSTAT_AUIACT 0x00000100 /* AUI activity */ 305 #define DC_TSTAT_10BTACT 0x00000200 /* 10baseT activity */ 306 #define DC_TSTAT_NSN 0x00000400 /* non-stable FLPs detected */ 307 #define DC_TSTAT_REMFAULT 0x00000800 308 #define DC_TSTAT_ANEGSTAT 0x00007000 309 #define DC_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */ 310 #define DC_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */ 311 312 #define DC_ASTAT_DISABLE 0x00000000 313 #define DC_ASTAT_TXDISABLE 0x00001000 314 #define DC_ASTAT_ABDETECT 0x00002000 315 #define DC_ASTAT_ACKDETECT 0x00003000 316 #define DC_ASTAT_CMPACKDETECT 0x00004000 317 #define DC_ASTAT_AUTONEGCMP 0x00005000 318 #define DC_ASTAT_LINKCHECK 0x00006000 319 320 /* 321 * PHY reset register 322 */ 323 #define DC_SIA_RESET 0x00000001 324 #define DC_SIA_AUI 0x00000008 /* AUI or 10baseT */ 325 326 /* 327 * 10baseT control register 328 */ 329 #define DC_TCTL_ENCODER_ENB 0x00000001 330 #define DC_TCTL_LOOPBACK 0x00000002 331 #define DC_TCTL_DRIVER_ENB 0x00000004 332 #define DC_TCTL_LNKPULSE_ENB 0x00000008 333 #define DC_TCTL_HALFDUPLEX 0x00000040 334 #define DC_TCTL_AUTONEGENBL 0x00000080 335 #define DC_TCTL_RX_SQUELCH 0x00000100 336 #define DC_TCTL_COLL_SQUELCH 0x00000200 337 #define DC_TCTL_COLL_DETECT 0x00000400 338 #define DC_TCTL_SQE_ENB 0x00000800 339 #define DC_TCTL_LINKTEST 0x00001000 340 #define DC_TCTL_AUTOPOLARITY 0x00002000 341 #define DC_TCTL_SET_POL_PLUS 0x00004000 342 #define DC_TCTL_AUTOSENSE 0x00008000 /* 10bt/AUI autosense */ 343 #define DC_TCTL_100BTXHALF 0x00010000 344 #define DC_TCTL_100BTXFULL 0x00020000 345 #define DC_TCTL_100BT4 0x00040000 346 347 /* 348 * Watchdog timer register 349 */ 350 #define DC_WDOG_JABBERDIS 0x00000001 351 #define DC_WDOG_HOSTUNJAB 0x00000002 352 #define DC_WDOG_JABBERCLK 0x00000004 353 #define DC_WDOG_RXWDOGDIS 0x00000010 354 #define DC_WDOG_RXWDOGCLK 0x00000020 355 #define DC_WDOG_MUSTBEZERO 0x00000100 356 #define DC_WDOG_AUIBNC 0x00100000 357 #define DC_WDOG_ACTIVITY 0x00200000 358 #define DC_WDOG_RX_MATCH 0x00400000 359 #define DC_WDOG_LINK 0x00800000 360 #define DC_WDOG_CTLWREN 0x08000000 361 362 /* 363 * SIA and General Purpose Port register (X3201) 364 */ 365 #define DC_SIAGP_RXMATCH 0x40000000 366 #define DC_SIAGP_INT1 0x20000000 367 #define DC_SIAGP_INT0 0x10000000 368 #define DC_SIAGP_WRITE_EN 0x08000000 369 #define DC_SIAGP_RXMATCH_EN 0x04000000 370 #define DC_SIAGP_INT1_EN 0x02000000 371 #define DC_SIAGP_INT0_EN 0x01000000 372 #define DC_SIAGP_LED3 0x00800000 373 #define DC_SIAGP_LED2 0x00400000 374 #define DC_SIAGP_LED1 0x00200000 375 #define DC_SIAGP_LED0 0x00100000 376 #define DC_SIAGP_MD_GP3_OUTPUT 0x00080000 377 #define DC_SIAGP_MD_GP2_OUTPUT 0x00040000 378 #define DC_SIAGP_MD_GP1_OUTPUT 0x00020000 379 #define DC_SIAGP_MD_GP0_OUTPUT 0x00010000 380 381 /* 382 * Size of a setup frame. 383 */ 384 #define DC_SFRAME_LEN 192 385 386 /* 387 * 21x4x TX/RX list structure. 388 */ 389 390 struct dc_desc { 391 u_int32_t dc_status; 392 u_int32_t dc_ctl; 393 u_int32_t dc_ptr1; 394 u_int32_t dc_ptr2; 395 }; 396 397 #define dc_data dc_ptr1 398 #define dc_next dc_ptr2 399 400 #define DC_RXSTAT_FIFOOFLOW 0x00000001 401 #define DC_RXSTAT_CRCERR 0x00000002 402 #define DC_RXSTAT_DRIBBLE 0x00000004 403 #define DC_RXSTAT_MIIERE 0x00000008 404 #define DC_RXSTAT_WATCHDOG 0x00000010 405 #define DC_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */ 406 #define DC_RXSTAT_COLLSEEN 0x00000040 407 #define DC_RXSTAT_GIANT 0x00000080 408 #define DC_RXSTAT_LASTFRAG 0x00000100 409 #define DC_RXSTAT_FIRSTFRAG 0x00000200 410 #define DC_RXSTAT_MULTICAST 0x00000400 411 #define DC_RXSTAT_RUNT 0x00000800 412 #define DC_RXSTAT_RXTYPE 0x00003000 413 #define DC_RXSTAT_DE 0x00004000 414 #define DC_RXSTAT_RXERR 0x00008000 415 #define DC_RXSTAT_RXLEN 0x3FFF0000 416 #define DC_RXSTAT_OWN 0x80000000 417 418 #define DC_RXBYTES(x) ((x & DC_RXSTAT_RXLEN) >> 16) 419 #define DC_RXSTAT (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG|DC_RXSTAT_OWN) 420 421 #define DC_RXCTL_BUFLEN1 0x00000FFF 422 #define DC_RXCTL_BUFLEN2 0x00FFF000 423 #define DC_RXCTL_RLINK 0x01000000 424 #define DC_RXCTL_RLAST 0x02000000 425 426 #define DC_TXSTAT_DEFER 0x00000001 427 #define DC_TXSTAT_UNDERRUN 0x00000002 428 #define DC_TXSTAT_LINKFAIL 0x00000003 429 #define DC_TXSTAT_COLLCNT 0x00000078 430 #define DC_TXSTAT_SQE 0x00000080 431 #define DC_TXSTAT_EXCESSCOLL 0x00000100 432 #define DC_TXSTAT_LATECOLL 0x00000200 433 #define DC_TXSTAT_NOCARRIER 0x00000400 434 #define DC_TXSTAT_CARRLOST 0x00000800 435 #define DC_TXSTAT_JABTIMEO 0x00004000 436 #define DC_TXSTAT_ERRSUM 0x00008000 437 #define DC_TXSTAT_OWN 0x80000000 438 439 #define DC_TXCTL_BUFLEN1 0x000007FF 440 #define DC_TXCTL_BUFLEN2 0x003FF800 441 #define DC_TXCTL_FILTTYPE0 0x00400000 442 #define DC_TXCTL_PAD 0x00800000 443 #define DC_TXCTL_TLINK 0x01000000 444 #define DC_TXCTL_TLAST 0x02000000 445 #define DC_TXCTL_NOCRC 0x04000000 446 #define DC_TXCTL_SETUP 0x08000000 447 #define DC_TXCTL_FILTTYPE1 0x10000000 448 #define DC_TXCTL_FIRSTFRAG 0x20000000 449 #define DC_TXCTL_LASTFRAG 0x40000000 450 #define DC_TXCTL_FINT 0x80000000 451 452 #define DC_FILTER_PERFECT 0x00000000 453 #define DC_FILTER_HASHPERF 0x00400000 454 #define DC_FILTER_INVERSE 0x10000000 455 #define DC_FILTER_HASHONLY 0x10400000 456 457 #define DC_MAXFRAGS 16 458 #ifdef DEVICE_POLLING 459 #define DC_RX_LIST_CNT 192 460 #else 461 #define DC_RX_LIST_CNT 64 462 #endif 463 #define DC_TX_LIST_CNT 256 464 #define DC_TX_LIST_RSVD 5 465 #define DC_MIN_FRAMELEN 60 466 #define DC_RXLEN 1536 467 468 #define DC_INC(x, y) (x) = (x + 1) % y 469 470 /* Macros to easily get the DMA address of a descriptor. */ 471 #define DC_RXDESC(sc, i) (sc->dc_laddr + \ 472 (uintptr_t)(sc->dc_ldata->dc_rx_list + i) - (uintptr_t)sc->dc_ldata) 473 #define DC_TXDESC(sc, i) (sc->dc_laddr + \ 474 (uintptr_t)(sc->dc_ldata->dc_tx_list + i) - (uintptr_t)sc->dc_ldata) 475 476 #if BYTE_ORDER == BIG_ENDIAN 477 #define DC_SP_MAC(x) ((x) << 16) 478 #else 479 #define DC_SP_MAC(x) (x) 480 #endif 481 482 struct dc_list_data { 483 struct dc_desc dc_rx_list[DC_RX_LIST_CNT]; 484 struct dc_desc dc_tx_list[DC_TX_LIST_CNT]; 485 }; 486 487 struct dc_chain_data { 488 struct mbuf *dc_rx_chain[DC_RX_LIST_CNT]; 489 struct mbuf *dc_tx_chain[DC_TX_LIST_CNT]; 490 bus_dmamap_t dc_rx_map[DC_RX_LIST_CNT]; 491 bus_dmamap_t dc_tx_map[DC_TX_LIST_CNT]; 492 u_int32_t *dc_sbuf; 493 u_int8_t dc_pad[DC_MIN_FRAMELEN]; 494 int dc_tx_first; 495 int dc_tx_prod; 496 int dc_tx_cons; 497 int dc_tx_cnt; 498 int dc_rx_prod; 499 }; 500 501 struct dc_mediainfo { 502 int dc_media; 503 u_int8_t *dc_gp_ptr; 504 u_int8_t dc_gp_len; 505 u_int8_t *dc_reset_ptr; 506 u_int8_t dc_reset_len; 507 struct dc_mediainfo *dc_next; 508 }; 509 510 511 struct dc_type { 512 u_int32_t dc_devid; 513 u_int8_t dc_minrev; 514 char *dc_name; 515 }; 516 517 struct dc_mii_frame { 518 u_int8_t mii_stdelim; 519 u_int8_t mii_opcode; 520 u_int8_t mii_phyaddr; 521 u_int8_t mii_regaddr; 522 u_int8_t mii_turnaround; 523 u_int16_t mii_data; 524 }; 525 526 /* 527 * MII constants 528 */ 529 #define DC_MII_STARTDELIM 0x01 530 #define DC_MII_READOP 0x02 531 #define DC_MII_WRITEOP 0x01 532 #define DC_MII_TURNAROUND 0x02 533 534 535 /* 536 * Registers specific to clone devices. 537 * This mainly relates to RX filter programming: not all 21x4x clones 538 * use the standard DEC filter programming mechanism. 539 */ 540 541 /* 542 * ADMtek specific registers and constants for the AL981 and AN985. 543 * The AN985 doesn't use the magic PHY registers. 544 */ 545 #define DC_AL_CR 0x88 /* command register */ 546 #define DC_AL_PAR0 0xA4 /* station address */ 547 #define DC_AL_PAR1 0xA8 /* station address */ 548 #define DC_AL_MAR0 0xAC /* multicast hash filter */ 549 #define DC_AL_MAR1 0xB0 /* multicast hash filter */ 550 #define DC_AL_BMCR 0xB4 /* built in PHY control */ 551 #define DC_AL_BMSR 0xB8 /* built in PHY status */ 552 #define DC_AL_VENID 0xBC /* built in PHY ID0 */ 553 #define DC_AL_DEVID 0xC0 /* built in PHY ID1 */ 554 #define DC_AL_ANAR 0xC4 /* built in PHY autoneg advert */ 555 #define DC_AL_LPAR 0xC8 /* bnilt in PHY link part. ability */ 556 #define DC_AL_ANER 0xCC /* built in PHY autoneg expansion */ 557 558 #define DC_AL_CR_ATUR 0x00000001 /* automatic TX underrun recovery */ 559 #define DC_ADMTEK_PHYADDR 0x1 560 #define DC_AL_EE_NODEADDR 4 561 /* End of ADMtek specific registers */ 562 563 /* 564 * ASIX specific registers. 565 */ 566 #define DC_AX_FILTIDX 0x68 /* RX filter index */ 567 #define DC_AX_FILTDATA 0x70 /* RX filter data */ 568 569 /* 570 * Special ASIX-specific bits in the ASIX NETCFG register (CSR6). 571 */ 572 #define DC_AX_NETCFG_RX_BROAD 0x00000100 573 574 /* 575 * RX Filter Index Register values 576 */ 577 #define DC_AX_FILTIDX_PAR0 0x00000000 578 #define DC_AX_FILTIDX_PAR1 0x00000001 579 #define DC_AX_FILTIDX_MAR0 0x00000002 580 #define DC_AX_FILTIDX_MAR1 0x00000003 581 /* End of ASIX specific registers */ 582 583 /* 584 * Macronix specific registers. The Macronix chips have a special 585 * register for reading the NWAY status, which we don't use, plus 586 * a magic packet register, which we need to tweak a bit per the 587 * Macronix application notes. 588 */ 589 #define DC_MX_MAGICPACKET 0x80 590 #define DC_MX_NWAYSTAT 0xA0 591 592 /* 593 * Magic packet register 594 */ 595 #define DC_MX_MPACK_DISABLE 0x00400000 596 597 /* 598 * NWAY status register. 599 */ 600 #define DC_MX_NWAY_10BTHALF 0x08000000 601 #define DC_MX_NWAY_10BTFULL 0x10000000 602 #define DC_MX_NWAY_100BTHALF 0x20000000 603 #define DC_MX_NWAY_100BTFULL 0x40000000 604 #define DC_MX_NWAY_100BT4 0x80000000 605 606 /* 607 * These are magic values that must be written into CSR16 608 * (DC_MX_MAGICPACKET) in order to put the chip into proper 609 * operating mode. The magic numbers are documented in the 610 * Macronix 98715 application notes. 611 */ 612 #define DC_MX_MAGIC_98713 0x0F370000 613 #define DC_MX_MAGIC_98713A 0x0B3C0000 614 #define DC_MX_MAGIC_98715 0x0B3C0000 615 #define DC_MX_MAGIC_98725 0x0B3C0000 616 /* End of Macronix specific registers */ 617 618 /* 619 * PNIC 82c168/82c169 specific registers. 620 * The PNIC has its own special NWAY support, which doesn't work, 621 * and shortcut ways of reading the EEPROM and MII bus. 622 */ 623 #define DC_PN_GPIO 0x60 /* general purpose pins control */ 624 #define DC_PN_PWRUP_CFG 0x90 /* config register, set by EEPROM */ 625 #define DC_PN_SIOCTL 0x98 /* serial EEPROM control register */ 626 #define DC_PN_MII 0xA0 /* MII access register */ 627 #define DC_PN_NWAY 0xB8 /* Internal NWAY register */ 628 629 /* Serial I/O EEPROM register */ 630 #define DC_PN_SIOCTL_DATA 0x0000003F 631 #define DC_PN_SIOCTL_OPCODE 0x00000300 632 #define DC_PN_SIOCTL_BUSY 0x80000000 633 634 #define DC_PN_EEOPCODE_ERASE 0x00000300 635 #define DC_PN_EEOPCODE_READ 0x00000600 636 #define DC_PN_EEOPCODE_WRITE 0x00000100 637 638 /* 639 * The first two general purpose pins control speed selection and 640 * 100Mbps loopback on the 82c168 chip. The control bits should always 641 * be set (to make the data pins outputs) and the speed selction and 642 * loopback bits set accordingly when changing media. Physically, this 643 * will set the state of a relay mounted on the card. 644 */ 645 #define DC_PN_GPIO_DATA0 0x000000001 646 #define DC_PN_GPIO_DATA1 0x000000002 647 #define DC_PN_GPIO_DATA2 0x000000004 648 #define DC_PN_GPIO_DATA3 0x000000008 649 #define DC_PN_GPIO_CTL0 0x000000010 650 #define DC_PN_GPIO_CTL1 0x000000020 651 #define DC_PN_GPIO_CTL2 0x000000040 652 #define DC_PN_GPIO_CTL3 0x000000080 653 #define DC_PN_GPIO_SPEEDSEL DC_PN_GPIO_DATA0/* 1 == 100Mbps, 0 == 10Mbps */ 654 #define DC_PN_GPIO_100TX_LOOP DC_PN_GPIO_DATA1/* 1 == normal, 0 == loop */ 655 #define DC_PN_GPIO_BNC_ENB DC_PN_GPIO_DATA2 656 #define DC_PN_GPIO_100TX_LNK DC_PN_GPIO_DATA3 657 #define DC_PN_GPIO_SETBIT(sc, r) \ 658 DC_SETBIT(sc, DC_PN_GPIO, ((r) | (r << 4))) 659 #define DC_PN_GPIO_CLRBIT(sc, r) \ 660 { \ 661 DC_SETBIT(sc, DC_PN_GPIO, ((r) << 4)); \ 662 DC_CLRBIT(sc, DC_PN_GPIO, (r)); \ 663 } 664 665 /* shortcut MII access register */ 666 #define DC_PN_MII_DATA 0x0000FFFF 667 #define DC_PN_MII_RESERVER 0x00020000 668 #define DC_PN_MII_REGADDR 0x007C0000 669 #define DC_PN_MII_PHYADDR 0x0F800000 670 #define DC_PN_MII_OPCODE 0x30000000 671 #define DC_PN_MII_BUSY 0x80000000 672 673 #define DC_PN_MIIOPCODE_READ 0x60020000 674 #define DC_PN_MIIOPCODE_WRITE 0x50020000 675 676 /* Internal NWAY bits */ 677 #define DC_PN_NWAY_RESET 0x00000001 /* reset */ 678 #define DC_PN_NWAY_PDOWN 0x00000002 /* power down */ 679 #define DC_PN_NWAY_BYPASS 0x00000004 /* bypass */ 680 #define DC_PN_NWAY_AUILOWCUR 0x00000008 /* AUI low current */ 681 #define DC_PN_NWAY_TPEXTEND 0x00000010 /* low squelch voltage */ 682 #define DC_PN_NWAY_POLARITY 0x00000020 /* 0 == on, 1 == off */ 683 #define DC_PN_NWAY_TP 0x00000040 /* 1 == tp, 0 == AUI */ 684 #define DC_PN_NWAY_AUIVOLT 0x00000080 /* 1 == full, 0 == half */ 685 #define DC_PN_NWAY_DUPLEX 0x00000100 /* LED, 1 == full, 0 == half */ 686 #define DC_PN_NWAY_LINKTEST 0x00000200 /* 0 == on, 1 == off */ 687 #define DC_PN_NWAY_AUTODETECT 0x00000400 /* 1 == off, 0 == on */ 688 #define DC_PN_NWAY_SPEEDSEL 0x00000800 /* LED, 0 = 10, 1 == 100 */ 689 #define DC_PN_NWAY_NWAY_ENB 0x00001000 /* 0 == off, 1 == on */ 690 #define DC_PN_NWAY_CAP10HDX 0x00002000 691 #define DC_PN_NWAY_CAP10FDX 0x00004000 692 #define DC_PN_NWAY_CAP100FDX 0x00008000 693 #define DC_PN_NWAY_CAP100HDX 0x00010000 694 #define DC_PN_NWAY_CAP100T4 0x00020000 695 #define DC_PN_NWAY_ANEGRESTART 0x02000000 /* resets when aneg done */ 696 #define DC_PN_NWAY_REMFAULT 0x04000000 697 #define DC_PN_NWAY_LPAR10HDX 0x08000000 698 #define DC_PN_NWAY_LPAR10FDX 0x10000000 699 #define DC_PN_NWAY_LPAR100FDX 0x20000000 700 #define DC_PN_NWAY_LPAR100HDX 0x40000000 701 #define DC_PN_NWAY_LPAR100T4 0x80000000 702 703 /* End of PNIC specific registers */ 704 705 /* 706 * CONEXANT specific registers. 707 */ 708 709 #define DC_CONEXANT_PHYADDR 0x1 710 #define DC_CONEXANT_EE_NODEADDR 0x19A 711 712 /* End of CONEXANT specific registers */ 713 714 715 struct dc_softc { 716 struct ifnet *dc_ifp; /* interface info */ 717 device_t dc_dev; /* device info */ 718 bus_space_handle_t dc_bhandle; /* bus space handle */ 719 bus_space_tag_t dc_btag; /* bus space tag */ 720 bus_dma_tag_t dc_ltag; /* tag for descriptor ring */ 721 bus_dmamap_t dc_lmap; /* map for descriptor ring */ 722 u_int32_t dc_laddr; /* DMA address of dc_ldata */ 723 bus_dma_tag_t dc_mtag; /* tag for mbufs */ 724 bus_dmamap_t dc_sparemap; 725 bus_dma_tag_t dc_stag; /* tag for the setup frame */ 726 bus_dmamap_t dc_smap; /* map for the setup frame */ 727 u_int32_t dc_saddr; /* DMA address of setup frame */ 728 void *dc_intrhand; 729 struct resource *dc_irq; 730 struct resource *dc_res; 731 const struct dc_type *dc_info; /* adapter info */ 732 device_t dc_miibus; 733 u_int8_t dc_type; 734 u_int8_t dc_pmode; 735 u_int8_t dc_link; 736 u_int8_t dc_cachesize; 737 int dc_romwidth; 738 int dc_pnic_rx_bug_save; 739 unsigned char *dc_pnic_rx_buf; 740 int dc_if_flags; 741 int dc_if_media; 742 u_int32_t dc_flags; 743 u_int32_t dc_txthresh; 744 u_int8_t *dc_srom; 745 struct dc_mediainfo *dc_mi; 746 struct dc_list_data *dc_ldata; 747 struct dc_chain_data dc_cdata; 748 struct callout dc_stat_ch; 749 struct callout dc_wdog_ch; 750 int dc_wdog_timer; 751 struct mtx dc_mtx; 752 #ifdef DEVICE_POLLING 753 int rxcycles; /* ... when polling */ 754 #endif 755 int suspended; /* 0 = normal 1 = suspended */ 756 }; 757 758 759 #define DC_LOCK(_sc) mtx_lock(&(_sc)->dc_mtx) 760 #define DC_UNLOCK(_sc) mtx_unlock(&(_sc)->dc_mtx) 761 #define DC_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->dc_mtx, MA_OWNED) 762 763 #define DC_TX_POLL 0x00000001 764 #define DC_TX_COALESCE 0x00000002 765 #define DC_TX_ADMTEK_WAR 0x00000004 766 #define DC_TX_USE_TX_INTR 0x00000008 767 #define DC_RX_FILTER_TULIP 0x00000010 768 #define DC_TX_INTR_FIRSTFRAG 0x00000020 769 #define DC_PNIC_RX_BUG_WAR 0x00000040 770 #define DC_TX_FIXED_RING 0x00000080 771 #define DC_TX_STORENFWD 0x00000100 772 #define DC_REDUCED_MII_POLL 0x00000200 773 #define DC_TX_INTR_ALWAYS 0x00000400 774 #define DC_21143_NWAY 0x00000800 775 #define DC_128BIT_HASH 0x00001000 776 #define DC_64BIT_HASH 0x00002000 777 #define DC_TULIP_LEDS 0x00004000 778 #define DC_TX_ONE 0x00008000 779 #define DC_TX_ALIGN 0x00010000 /* align mbuf on tx */ 780 781 /* 782 * register space access macros 783 */ 784 #define CSR_WRITE_4(sc, reg, val) \ 785 bus_space_write_4(sc->dc_btag, sc->dc_bhandle, reg, val) 786 787 #define CSR_READ_4(sc, reg) \ 788 bus_space_read_4(sc->dc_btag, sc->dc_bhandle, reg) 789 790 #define DC_TIMEOUT 1000 791 #define ETHER_ALIGN 2 792 793 /* 794 * General constants that are fun to know. 795 */ 796 797 /* 798 * DEC PCI vendor ID 799 */ 800 #define DC_VENDORID_DEC 0x1011 801 802 /* 803 * DEC/Intel 21143 PCI device ID 804 */ 805 #define DC_DEVICEID_21143 0x0019 806 807 /* 808 * Macronix PCI vendor ID 809 */ 810 #define DC_VENDORID_MX 0x10D9 811 812 /* 813 * Macronix PMAC device IDs. 814 */ 815 #define DC_DEVICEID_98713 0x0512 816 #define DC_DEVICEID_987x5 0x0531 817 #define DC_DEVICEID_98727 0x0532 818 #define DC_DEVICEID_98732 0x0532 819 820 /* Macronix PCI revision codes. */ 821 #define DC_REVISION_98713 0x00 822 #define DC_REVISION_98713A 0x10 823 #define DC_REVISION_98715 0x20 824 #define DC_REVISION_98715AEC_C 0x25 825 #define DC_REVISION_98725 0x30 826 827 /* 828 * Compex PCI vendor ID. 829 */ 830 #define DC_VENDORID_CP 0x11F6 831 832 /* 833 * Compex PMAC PCI device IDs. 834 */ 835 #define DC_DEVICEID_98713_CP 0x9881 836 837 /* 838 * Lite-On PNIC PCI vendor ID 839 */ 840 #define DC_VENDORID_LO 0x11AD 841 842 /* 843 * 82c168/82c169 PNIC device IDs. Both chips have the same device 844 * ID but different revisions. Revision 0x10 is the 82c168, and 845 * 0x20 is the 82c169. 846 */ 847 #define DC_DEVICEID_82C168 0x0002 848 849 #define DC_REVISION_82C168 0x10 850 #define DC_REVISION_82C169 0x20 851 852 /* 853 * Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A 854 * with wake on lan/magic packet support. 855 */ 856 #define DC_DEVICEID_82C115 0xc115 857 858 /* 859 * Davicom vendor ID. 860 */ 861 #define DC_VENDORID_DAVICOM 0x1282 862 863 /* 864 * Davicom device IDs. 865 */ 866 #define DC_DEVICEID_DM9009 0x9009 867 #define DC_DEVICEID_DM9100 0x9100 868 #define DC_DEVICEID_DM9102 0x9102 869 870 /* 871 * The DM9102A has the same PCI device ID as the DM9102, 872 * but a higher revision code. 873 */ 874 #define DC_REVISION_DM9102 0x10 875 #define DC_REVISION_DM9102A 0x30 876 877 /* 878 * ADMtek vendor ID. 879 */ 880 #define DC_VENDORID_ADMTEK 0x1317 881 882 /* 883 * ADMtek device IDs. 884 */ 885 #define DC_DEVICEID_AL981 0x0981 886 #define DC_DEVICEID_AN985 0x0985 887 #define DC_DEVICEID_FA511 0x1985 888 #define DC_DEVICEID_ADM9511 0x9511 889 #define DC_DEVICEID_ADM9513 0x9513 890 891 /* 892 * 3COM PCI vendor ID 893 */ 894 #define DC_VENDORID_3COM 0x10b7 895 896 /* 897 * 3COM OfficeConnect 10/100B (3CSOHO100B-TX) 898 */ 899 #define DC_DEVICEID_3CSOHOB 0x9300 900 901 /* 902 * ASIX vendor ID. 903 */ 904 #define DC_VENDORID_ASIX 0x125B 905 906 /* 907 * ASIX device IDs. 908 */ 909 #define DC_DEVICEID_AX88140A 0x1400 910 911 /* 912 * The ASIX AX88140 and ASIX AX88141 have the same vendor and 913 * device IDs but different revision values. 914 */ 915 #define DC_REVISION_88140 0x00 916 #define DC_REVISION_88141 0x10 917 918 /* 919 * Accton vendor ID. 920 */ 921 #define DC_VENDORID_ACCTON 0x1113 922 923 /* 924 * Accton device IDs. 925 */ 926 #define DC_DEVICEID_EN1217 0x1217 927 #define DC_DEVICEID_EN2242 0x1216 928 929 /* 930 * Xircom vendor ID 931 */ 932 #define DC_VENDORID_XIRCOM 0x115d 933 934 /* 935 * Xircom device IDs. 936 */ 937 #define DC_DEVICEID_X3201 0x0003 938 939 /* 940 * D-Link vendor ID 941 */ 942 #define DC_VENDORID_DLINK 0x1186 943 944 /* 945 * D-Link device IDs. 946 */ 947 #define DC_DEVICEID_DRP32TXD 0x1561 948 949 /* 950 * Abocom vendor ID 951 */ 952 #define DC_VENDORID_ABOCOM 0x13d1 953 954 /* 955 * Abocom device IDs. 956 */ 957 #define DC_DEVICEID_FE2500 0xAB02 958 #define DC_DEVICEID_FE2500MX 0xab08 959 960 /* 961 * Conexant vendor ID. 962 */ 963 #define DC_VENDORID_CONEXANT 0x14f1 964 965 /* 966 * Conexant device IDs. 967 */ 968 #define DC_DEVICEID_RS7112 0x1803 969 970 /* 971 * Planex vendor ID 972 */ 973 #define DC_VENDORID_PLANEX 0x14ea 974 975 /* 976 * Planex device IDs. 977 */ 978 #define DC_DEVICEID_FNW3602T 0xab08 979 980 /* 981 * Not sure who this vendor should be, so we'll go with HAWKING until 982 * I can locate the right one. 983 */ 984 #define DC_VENDORID_HAWKING 0x17b3 985 986 /* 987 * Sure looks like an abocom device ID, but it found on my hawking PN672TX 988 * card. Use that for now, and upgrade later. 989 */ 990 #define DC_DEVICEID_HAWKING_PN672TX 0xab08 991 992 /* 993 * Microsoft device ID. 994 */ 995 #define DC_VENDORID_MICROSOFT 0x1414 996 997 /* 998 * Supported Microsoft PCI and cardbus NICs. These are really 999 * ADMtek parts in disguise. 1000 */ 1001 1002 #define DC_DEVICEID_MSMN120 0x0001 1003 #define DC_DEVICEID_MSMN130 0x0002 1004 1005 /* 1006 * Linksys vendor ID. 1007 */ 1008 #define DC_VENDORID_LINKSYS 0x1737 1009 1010 /* 1011 * Linksys device IDs. 1012 */ 1013 #define DC_DEVICEID_PCMPC200_AB08 0xab08 1014 #define DC_DEVICEID_PCMPC200_AB09 0xab09 1015 1016 #define DC_DEVID(vendor, device) ((device) << 16 | (vendor)) 1017 1018 /* 1019 * PCI low memory base and low I/O base register, and 1020 * other PCI registers. 1021 */ 1022 1023 #define DC_PCI_CFBIO PCIR_BAR(0) /* Base I/O address */ 1024 #define DC_PCI_CFBMA PCIR_BAR(1) /* Base memory address */ 1025 #define DC_PCI_CFDD 0x40 /* Device and driver area */ 1026 #define DC_PCI_CWUA0 0x44 /* Wake-Up LAN addr 0 */ 1027 #define DC_PCI_CWUA1 0x48 /* Wake-Up LAN addr 1 */ 1028 #define DC_PCI_SOP0 0x4C /* SecureON passwd 0 */ 1029 #define DC_PCI_SOP1 0x50 /* SecureON passwd 1 */ 1030 #define DC_PCI_CWUC 0x54 /* Configuration Wake-Up cmd */ 1031 1032 #define DC_21143_PB_REV 0x00000030 1033 #define DC_21143_TB_REV 0x00000030 1034 #define DC_21143_PC_REV 0x00000030 1035 #define DC_21143_TC_REV 0x00000030 1036 #define DC_21143_PD_REV 0x00000041 1037 #define DC_21143_TD_REV 0x00000041 1038 1039 /* Configuration and driver area */ 1040 #define DC_CFDD_DRVUSE 0x0000FFFF 1041 #define DC_CFDD_SNOOZE_MODE 0x40000000 1042 #define DC_CFDD_SLEEP_MODE 0x80000000 1043 1044 /* Configuration wake-up command register */ 1045 #define DC_CWUC_MUST_BE_ZERO 0x00000001 1046 #define DC_CWUC_SECUREON_ENB 0x00000002 1047 #define DC_CWUC_FORCE_WUL 0x00000004 1048 #define DC_CWUC_BNC_ABILITY 0x00000008 1049 #define DC_CWUC_AUI_ABILITY 0x00000010 1050 #define DC_CWUC_TP10_ABILITY 0x00000020 1051 #define DC_CWUC_MII_ABILITY 0x00000040 1052 #define DC_CWUC_SYM_ABILITY 0x00000080 1053 #define DC_CWUC_LOCK 0x00000100 1054 1055 /* 1056 * SROM nonsense. 1057 */ 1058 1059 #define DC_IB_CTLRCNT 0x13 1060 #define DC_IB_LEAF0_CNUM 0x1A 1061 #define DC_IB_LEAF0_OFFSET 0x1B 1062 1063 struct dc_info_leaf { 1064 u_int16_t dc_conntype; 1065 u_int8_t dc_blkcnt; 1066 u_int8_t dc_rsvd; 1067 u_int16_t dc_infoblk; 1068 }; 1069 1070 #define DC_CTYPE_10BT 0x0000 1071 #define DC_CTYPE_10BT_NWAY 0x0100 1072 #define DC_CTYPE_10BT_FDX 0x0204 1073 #define DC_CTYPE_10B2 0x0001 1074 #define DC_CTYPE_10B5 0x0002 1075 #define DC_CTYPE_100BT 0x0003 1076 #define DC_CTYPE_100BT_FDX 0x0205 1077 #define DC_CTYPE_100T4 0x0006 1078 #define DC_CTYPE_100FX 0x0007 1079 #define DC_CTYPE_100FX_FDX 0x0208 1080 #define DC_CTYPE_MII_10BT 0x0009 1081 #define DC_CTYPE_MII_10BT_FDX 0x020A 1082 #define DC_CTYPE_MII_100BT 0x000D 1083 #define DC_CTYPE_MII_100BT_FDX 0x020E 1084 #define DC_CTYPE_MII_100T4 0x000F 1085 #define DC_CTYPE_MII_100FX 0x0010 1086 #define DC_CTYPE_MII_100FX_FDX 0x0211 1087 #define DC_CTYPE_DYN_PUP_AUTOSENSE 0x0800 1088 #define DC_CTYPE_PUP_AUTOSENSE 0x8800 1089 #define DC_CTYPE_NOMEDIA 0xFFFF 1090 1091 #define DC_EBLOCK_SIA 0x0002 1092 #define DC_EBLOCK_MII 0x0003 1093 #define DC_EBLOCK_SYM 0x0004 1094 #define DC_EBLOCK_RESET 0x0005 1095 #define DC_EBLOCK_PHY_SHUTDOWN 0x0006 1096 1097 struct dc_leaf_hdr { 1098 u_int16_t dc_mtype; 1099 u_int8_t dc_mcnt; 1100 u_int8_t dc_rsvd; 1101 }; 1102 1103 struct dc_eblock_hdr { 1104 u_int8_t dc_len; 1105 u_int8_t dc_type; 1106 }; 1107 1108 struct dc_eblock_sia { 1109 struct dc_eblock_hdr dc_sia_hdr; 1110 u_int8_t dc_sia_code; 1111 union { 1112 struct dc_sia_ext { /* if (dc_sia_code & DC_SIA_CODE_EXT) */ 1113 u_int8_t dc_sia_mediaspec[6]; /* CSR13, CSR14, CSR15 */ 1114 u_int8_t dc_sia_gpio_ctl[2]; 1115 u_int8_t dc_sia_gpio_dat[2]; 1116 } dc_sia_ext; 1117 struct dc_sia_noext { 1118 u_int8_t dc_sia_gpio_ctl[2]; 1119 u_int8_t dc_sia_gpio_dat[2]; 1120 } dc_sia_noext; 1121 } dc_un; 1122 }; 1123 1124 #define DC_SIA_CODE_10BT 0x00 1125 #define DC_SIA_CODE_10B2 0x01 1126 #define DC_SIA_CODE_10B5 0x02 1127 #define DC_SIA_CODE_10BT_FDX 0x04 1128 #define DC_SIA_CODE_EXT 0x40 1129 1130 /* 1131 * Note that the first word in the gpr and reset 1132 * sequences is always a control word. 1133 */ 1134 struct dc_eblock_mii { 1135 struct dc_eblock_hdr dc_mii_hdr; 1136 u_int8_t dc_mii_phynum; 1137 u_int8_t dc_gpr_len; 1138 /* u_int16_t dc_gpr_dat[n]; */ 1139 /* u_int8_t dc_reset_len; */ 1140 /* u_int16_t dc_reset_dat[n]; */ 1141 /* There are other fields after these, but we don't 1142 * care about them since they can be determined by looking 1143 * at the PHY. 1144 */ 1145 }; 1146 1147 struct dc_eblock_sym { 1148 struct dc_eblock_hdr dc_sym_hdr; 1149 u_int8_t dc_sym_code; 1150 u_int8_t dc_sym_gpio_ctl[2]; 1151 u_int8_t dc_sym_gpio_dat[2]; 1152 u_int8_t dc_sym_cmd[2]; 1153 }; 1154 1155 #define DC_SYM_CODE_100BT 0x03 1156 #define DC_SYM_CODE_100BT_FDX 0x05 1157 #define DC_SYM_CODE_100T4 0x06 1158 #define DC_SYM_CODE_100FX 0x07 1159 #define DC_SYM_CODE_100FX_FDX 0x08 1160 1161 struct dc_eblock_reset { 1162 struct dc_eblock_hdr dc_reset_hdr; 1163 u_int8_t dc_reset_len; 1164 /* u_int16_t dc_reset_dat[n]; */ 1165 }; 1166