1 /*- 2 * Copyright (c) 2001 Michael Smith 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 /* 30 * Common Interface for SCSI-3 Support driver. 31 * 32 * CISS claims to provide a common interface between a generic SCSI 33 * transport and an intelligent host adapter. 34 * 35 * This driver supports CISS as defined in the document "CISS Command 36 * Interface for SCSI-3 Support Open Specification", Version 1.04, 37 * Valence Number 1, dated 20001127, produced by Compaq Computer 38 * Corporation. This document appears to be a hastily and somewhat 39 * arbitrarlily cut-down version of a larger (and probably even more 40 * chaotic and inconsistent) Compaq internal document. Various 41 * details were also gleaned from Compaq's "cciss" driver for Linux. 42 * 43 * We provide a shim layer between the CISS interface and CAM, 44 * offloading most of the queueing and being-a-disk chores onto CAM. 45 * Entry to the driver is via the PCI bus attachment (ciss_probe, 46 * ciss_attach, etc) and via the CAM interface (ciss_cam_action, 47 * ciss_cam_poll). The Compaq CISS adapters are, however, poor SCSI 48 * citizens and we have to fake up some responses to get reasonable 49 * behaviour out of them. In addition, the CISS command set is by no 50 * means adequate to support the functionality of a RAID controller, 51 * and thus the supported Compaq adapters utilise portions of the 52 * control protocol from earlier Compaq adapter families. 53 * 54 * Note that we only support the "simple" transport layer over PCI. 55 * This interface (ab)uses the I2O register set (specifically the post 56 * queues) to exchange commands with the adapter. Other interfaces 57 * are available, but we aren't supposed to know about them, and it is 58 * dubious whether they would provide major performance improvements 59 * except under extreme load. 60 * 61 * Currently the only supported CISS adapters are the Compaq Smart 62 * Array 5* series (5300, 5i, 532). Even with only three adapters, 63 * Compaq still manage to have interface variations. 64 * 65 * 66 * Thanks must go to Fred Harris and Darryl DeVinney at Compaq, as 67 * well as Paul Saab at Yahoo! for their assistance in making this 68 * driver happen. 69 */ 70 71 #include <sys/param.h> 72 #include <sys/systm.h> 73 #include <sys/malloc.h> 74 #include <sys/kernel.h> 75 #include <sys/bus.h> 76 #include <sys/conf.h> 77 #include <sys/stat.h> 78 79 #include <cam/cam.h> 80 #include <cam/cam_ccb.h> 81 #include <cam/cam_periph.h> 82 #include <cam/cam_sim.h> 83 #include <cam/cam_xpt_sim.h> 84 #include <cam/scsi/scsi_all.h> 85 #include <cam/scsi/scsi_message.h> 86 87 #include <machine/clock.h> 88 #include <machine/bus_memio.h> 89 #include <machine/bus.h> 90 #include <machine/endian.h> 91 #include <machine/resource.h> 92 #include <sys/rman.h> 93 94 #include <pci/pcireg.h> 95 #include <pci/pcivar.h> 96 97 #include <dev/ciss/cissreg.h> 98 #include <dev/ciss/cissvar.h> 99 #include <dev/ciss/cissio.h> 100 101 MALLOC_DEFINE(CISS_MALLOC_CLASS, "ciss_data", "ciss internal data buffers"); 102 103 /* pci interface */ 104 static int ciss_lookup(device_t dev); 105 static int ciss_probe(device_t dev); 106 static int ciss_attach(device_t dev); 107 static int ciss_detach(device_t dev); 108 static int ciss_shutdown(device_t dev); 109 110 /* (de)initialisation functions, control wrappers */ 111 static int ciss_init_pci(struct ciss_softc *sc); 112 static int ciss_wait_adapter(struct ciss_softc *sc); 113 static int ciss_flush_adapter(struct ciss_softc *sc); 114 static int ciss_init_requests(struct ciss_softc *sc); 115 static void ciss_command_map_helper(void *arg, bus_dma_segment_t *segs, 116 int nseg, int error); 117 static int ciss_identify_adapter(struct ciss_softc *sc); 118 static int ciss_init_logical(struct ciss_softc *sc); 119 static int ciss_identify_logical(struct ciss_softc *sc, struct ciss_ldrive *ld); 120 static int ciss_get_ldrive_status(struct ciss_softc *sc, struct ciss_ldrive *ld); 121 static int ciss_update_config(struct ciss_softc *sc); 122 static int ciss_accept_media(struct ciss_softc *sc, int ldrive, int async); 123 static void ciss_accept_media_complete(struct ciss_request *cr); 124 static void ciss_free(struct ciss_softc *sc); 125 126 /* request submission/completion */ 127 static int ciss_start(struct ciss_request *cr); 128 static void ciss_done(struct ciss_softc *sc); 129 static void ciss_intr(void *arg); 130 static void ciss_complete(struct ciss_softc *sc); 131 static int ciss_report_request(struct ciss_request *cr, int *command_status, 132 int *scsi_status); 133 static int ciss_synch_request(struct ciss_request *cr, int timeout); 134 static int ciss_poll_request(struct ciss_request *cr, int timeout); 135 static int ciss_wait_request(struct ciss_request *cr, int timeout); 136 #if 0 137 static int ciss_abort_request(struct ciss_request *cr); 138 #endif 139 140 /* request queueing */ 141 static int ciss_get_request(struct ciss_softc *sc, struct ciss_request **crp); 142 static void ciss_preen_command(struct ciss_request *cr); 143 static void ciss_release_request(struct ciss_request *cr); 144 145 /* request helpers */ 146 static int ciss_get_bmic_request(struct ciss_softc *sc, struct ciss_request **crp, 147 int opcode, void **bufp, size_t bufsize); 148 static int ciss_user_command(struct ciss_softc *sc, IOCTL_Command_struct *ioc); 149 150 /* DMA map/unmap */ 151 static int ciss_map_request(struct ciss_request *cr); 152 static void ciss_request_map_helper(void *arg, bus_dma_segment_t *segs, 153 int nseg, int error); 154 static void ciss_unmap_request(struct ciss_request *cr); 155 156 /* CAM interface */ 157 static int ciss_cam_init(struct ciss_softc *sc); 158 static void ciss_cam_rescan_target(struct ciss_softc *sc, int target); 159 static void ciss_cam_rescan_all(struct ciss_softc *sc); 160 static void ciss_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb); 161 static void ciss_cam_action(struct cam_sim *sim, union ccb *ccb); 162 static int ciss_cam_action_io(struct cam_sim *sim, struct ccb_scsiio *csio); 163 static int ciss_cam_emulate(struct ciss_softc *sc, struct ccb_scsiio *csio); 164 static void ciss_cam_poll(struct cam_sim *sim); 165 static void ciss_cam_complete(struct ciss_request *cr); 166 static void ciss_cam_complete_fixup(struct ciss_softc *sc, struct ccb_scsiio *csio); 167 static struct cam_periph *ciss_find_periph(struct ciss_softc *sc, int target); 168 static int ciss_name_device(struct ciss_softc *sc, int target); 169 170 /* periodic status monitoring */ 171 static void ciss_periodic(void *arg); 172 static void ciss_notify_event(struct ciss_softc *sc); 173 static void ciss_notify_complete(struct ciss_request *cr); 174 static int ciss_notify_abort(struct ciss_softc *sc); 175 static int ciss_notify_abort_bmic(struct ciss_softc *sc); 176 static void ciss_notify_logical(struct ciss_softc *sc, struct ciss_notify *cn); 177 static void ciss_notify_physical(struct ciss_softc *sc, struct ciss_notify *cn); 178 179 /* debugging output */ 180 static void ciss_print_request(struct ciss_request *cr); 181 static void ciss_print_ldrive(struct ciss_softc *sc, struct ciss_ldrive *ld); 182 static const char *ciss_name_ldrive_status(int status); 183 static int ciss_decode_ldrive_status(int status); 184 static const char *ciss_name_ldrive_org(int org); 185 static const char *ciss_name_command_status(int status); 186 187 /* 188 * PCI bus interface. 189 */ 190 static device_method_t ciss_methods[] = { 191 /* Device interface */ 192 DEVMETHOD(device_probe, ciss_probe), 193 DEVMETHOD(device_attach, ciss_attach), 194 DEVMETHOD(device_detach, ciss_detach), 195 DEVMETHOD(device_shutdown, ciss_shutdown), 196 { 0, 0 } 197 }; 198 199 static driver_t ciss_pci_driver = { 200 "ciss", 201 ciss_methods, 202 sizeof(struct ciss_softc) 203 }; 204 205 static devclass_t ciss_devclass; 206 DRIVER_MODULE(ciss, pci, ciss_pci_driver, ciss_devclass, 0, 0); 207 208 /* 209 * Control device interface. 210 */ 211 static d_open_t ciss_open; 212 static d_close_t ciss_close; 213 static d_ioctl_t ciss_ioctl; 214 215 #define CISS_CDEV_MAJOR 166 216 217 static struct cdevsw ciss_cdevsw = { 218 .d_open = ciss_open, 219 .d_close = ciss_close, 220 .d_ioctl = ciss_ioctl, 221 .d_name = "ciss", 222 .d_maj = CISS_CDEV_MAJOR, 223 }; 224 225 /************************************************************************ 226 * CISS adapters amazingly don't have a defined programming interface 227 * value. (One could say some very despairing things about PCI and 228 * people just not getting the general idea.) So we are forced to 229 * stick with matching against subvendor/subdevice, and thus have to 230 * be updated for every new CISS adapter that appears. 231 */ 232 #define CISS_BOARD_SA5 (1<<0) 233 #define CISS_BOARD_SA5B (1<<1) 234 235 static struct 236 { 237 u_int16_t subvendor; 238 u_int16_t subdevice; 239 int flags; 240 char *desc; 241 } ciss_vendor_data[] = { 242 { 0x0e11, 0x4070, CISS_BOARD_SA5, "Compaq Smart Array 5300" }, 243 { 0x0e11, 0x4080, CISS_BOARD_SA5B, "Compaq Smart Array 5i" }, 244 { 0x0e11, 0x4082, CISS_BOARD_SA5B, "Compaq Smart Array 532" }, 245 { 0x0e11, 0x4083, CISS_BOARD_SA5B, "HP Smart Array 5312" }, 246 { 0x0e11, 0x409A, CISS_BOARD_SA5, "HP Smart Array 641" }, 247 { 0x0e11, 0x409B, CISS_BOARD_SA5, "HP Smart Array 642" }, 248 { 0x0e11, 0x409C, CISS_BOARD_SA5, "HP Smart Array 6400" }, 249 { 0x0e11, 0x409D, CISS_BOARD_SA5, "HP Smart Array 6400 EM" }, 250 { 0, 0, 0, NULL } 251 }; 252 253 /************************************************************************ 254 * Find a match for the device in our list of known adapters. 255 */ 256 static int 257 ciss_lookup(device_t dev) 258 { 259 int i; 260 261 for (i = 0; ciss_vendor_data[i].desc != NULL; i++) 262 if ((pci_get_subvendor(dev) == ciss_vendor_data[i].subvendor) && 263 (pci_get_subdevice(dev) == ciss_vendor_data[i].subdevice)) { 264 return(i); 265 } 266 return(-1); 267 } 268 269 /************************************************************************ 270 * Match a known CISS adapter. 271 */ 272 static int 273 ciss_probe(device_t dev) 274 { 275 int i; 276 277 i = ciss_lookup(dev); 278 if (i != -1) { 279 device_set_desc(dev, ciss_vendor_data[i].desc); 280 return(-10); 281 } 282 return(ENOENT); 283 } 284 285 /************************************************************************ 286 * Attach the driver to this adapter. 287 */ 288 static int 289 ciss_attach(device_t dev) 290 { 291 struct ciss_softc *sc; 292 int i, error; 293 294 debug_called(1); 295 296 #ifdef CISS_DEBUG 297 /* print structure/union sizes */ 298 debug_struct(ciss_command); 299 debug_struct(ciss_header); 300 debug_union(ciss_device_address); 301 debug_struct(ciss_cdb); 302 debug_struct(ciss_report_cdb); 303 debug_struct(ciss_notify_cdb); 304 debug_struct(ciss_notify); 305 debug_struct(ciss_message_cdb); 306 debug_struct(ciss_error_info_pointer); 307 debug_struct(ciss_error_info); 308 debug_struct(ciss_sg_entry); 309 debug_struct(ciss_config_table); 310 debug_struct(ciss_bmic_cdb); 311 debug_struct(ciss_bmic_id_ldrive); 312 debug_struct(ciss_bmic_id_lstatus); 313 debug_struct(ciss_bmic_id_table); 314 debug_struct(ciss_bmic_id_pdrive); 315 debug_struct(ciss_bmic_blink_pdrive); 316 debug_struct(ciss_bmic_flush_cache); 317 debug_const(CISS_MAX_REQUESTS); 318 debug_const(CISS_MAX_LOGICAL); 319 debug_const(CISS_INTERRUPT_COALESCE_DELAY); 320 debug_const(CISS_INTERRUPT_COALESCE_COUNT); 321 debug_const(CISS_COMMAND_ALLOC_SIZE); 322 debug_const(CISS_COMMAND_SG_LENGTH); 323 324 debug_type(cciss_pci_info_struct); 325 debug_type(cciss_coalint_struct); 326 debug_type(cciss_coalint_struct); 327 debug_type(NodeName_type); 328 debug_type(NodeName_type); 329 debug_type(Heartbeat_type); 330 debug_type(BusTypes_type); 331 debug_type(FirmwareVer_type); 332 debug_type(DriverVer_type); 333 debug_type(IOCTL_Command_struct); 334 #endif 335 336 sc = device_get_softc(dev); 337 sc->ciss_dev = dev; 338 339 /* 340 * Work out adapter type. 341 */ 342 i = ciss_lookup(dev); 343 if (ciss_vendor_data[i].flags & CISS_BOARD_SA5) { 344 sc->ciss_interrupt_mask = CISS_TL_SIMPLE_INTR_OPQ_SA5; 345 } else if (ciss_vendor_data[i].flags & CISS_BOARD_SA5B) { 346 sc->ciss_interrupt_mask = CISS_TL_SIMPLE_INTR_OPQ_SA5B; 347 } else { 348 /* really an error on our part */ 349 ciss_printf(sc, "unable to determine hardware type\n"); 350 error = ENXIO; 351 goto out; 352 } 353 354 /* 355 * Do PCI-specific init. 356 */ 357 if ((error = ciss_init_pci(sc)) != 0) 358 goto out; 359 360 /* 361 * Initialise driver queues. 362 */ 363 ciss_initq_free(sc); 364 ciss_initq_busy(sc); 365 ciss_initq_complete(sc); 366 367 /* 368 * Initialise command/request pool. 369 */ 370 if ((error = ciss_init_requests(sc)) != 0) 371 goto out; 372 373 /* 374 * Get adapter information. 375 */ 376 if ((error = ciss_identify_adapter(sc)) != 0) 377 goto out; 378 379 /* 380 * Build our private table of logical devices. 381 */ 382 if ((error = ciss_init_logical(sc)) != 0) 383 goto out; 384 385 /* 386 * Enable interrupts so that the CAM scan can complete. 387 */ 388 CISS_TL_SIMPLE_ENABLE_INTERRUPTS(sc); 389 390 /* 391 * Initialise the CAM interface. 392 */ 393 if ((error = ciss_cam_init(sc)) != 0) 394 goto out; 395 396 /* 397 * Start the heartbeat routine and event chain. 398 */ 399 ciss_periodic(sc); 400 401 /* 402 * Create the control device. 403 */ 404 sc->ciss_dev_t = make_dev(&ciss_cdevsw, device_get_unit(sc->ciss_dev), 405 UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR, 406 "ciss%d", device_get_unit(sc->ciss_dev)); 407 sc->ciss_dev_t->si_drv1 = sc; 408 409 /* 410 * The adapter is running; synchronous commands can now sleep 411 * waiting for an interrupt to signal completion. 412 */ 413 sc->ciss_flags |= CISS_FLAG_RUNNING; 414 415 error = 0; 416 out: 417 if (error != 0) 418 ciss_free(sc); 419 return(error); 420 } 421 422 /************************************************************************ 423 * Detach the driver from this adapter. 424 */ 425 static int 426 ciss_detach(device_t dev) 427 { 428 struct ciss_softc *sc = device_get_softc(dev); 429 430 debug_called(1); 431 432 /* flush adapter cache */ 433 ciss_flush_adapter(sc); 434 435 destroy_dev(sc->ciss_dev_t); 436 437 /* release all resources */ 438 ciss_free(sc); 439 440 return(0); 441 442 } 443 444 /************************************************************************ 445 * Prepare adapter for system shutdown. 446 */ 447 static int 448 ciss_shutdown(device_t dev) 449 { 450 struct ciss_softc *sc = device_get_softc(dev); 451 452 debug_called(1); 453 454 /* flush adapter cache */ 455 ciss_flush_adapter(sc); 456 457 return(0); 458 } 459 460 /************************************************************************ 461 * Perform PCI-specific attachment actions. 462 */ 463 static int 464 ciss_init_pci(struct ciss_softc *sc) 465 { 466 uintptr_t cbase, csize, cofs; 467 int error; 468 469 debug_called(1); 470 471 /* 472 * Allocate register window first (we need this to find the config 473 * struct). 474 */ 475 error = ENXIO; 476 sc->ciss_regs_rid = CISS_TL_SIMPLE_BAR_REGS; 477 if ((sc->ciss_regs_resource = 478 bus_alloc_resource(sc->ciss_dev, SYS_RES_MEMORY, &sc->ciss_regs_rid, 479 0, ~0, 1, RF_ACTIVE)) == NULL) { 480 ciss_printf(sc, "can't allocate register window\n"); 481 return(ENXIO); 482 } 483 sc->ciss_regs_bhandle = rman_get_bushandle(sc->ciss_regs_resource); 484 sc->ciss_regs_btag = rman_get_bustag(sc->ciss_regs_resource); 485 486 /* 487 * Find the BAR holding the config structure. If it's not the one 488 * we already mapped for registers, map it too. 489 */ 490 sc->ciss_cfg_rid = CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_CFG_BAR) & 0xffff; 491 if (sc->ciss_cfg_rid != sc->ciss_regs_rid) { 492 if ((sc->ciss_cfg_resource = 493 bus_alloc_resource(sc->ciss_dev, SYS_RES_MEMORY, &sc->ciss_cfg_rid, 494 0, ~0, 1, RF_ACTIVE)) == NULL) { 495 ciss_printf(sc, "can't allocate config window\n"); 496 return(ENXIO); 497 } 498 cbase = (uintptr_t)rman_get_virtual(sc->ciss_cfg_resource); 499 csize = rman_get_end(sc->ciss_cfg_resource) - 500 rman_get_start(sc->ciss_cfg_resource) + 1; 501 } else { 502 cbase = (uintptr_t)rman_get_virtual(sc->ciss_regs_resource); 503 csize = rman_get_end(sc->ciss_regs_resource) - 504 rman_get_start(sc->ciss_regs_resource) + 1; 505 } 506 cofs = CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_CFG_OFF); 507 508 /* 509 * Use the base/size/offset values we just calculated to 510 * sanity-check the config structure. If it's OK, point to it. 511 */ 512 if ((cofs + sizeof(struct ciss_config_table)) > csize) { 513 ciss_printf(sc, "config table outside window\n"); 514 return(ENXIO); 515 } 516 sc->ciss_cfg = (struct ciss_config_table *)(cbase + cofs); 517 debug(1, "config struct at %p", sc->ciss_cfg); 518 519 /* 520 * Validate the config structure. If we supported other transport 521 * methods, we could select amongst them at this point in time. 522 */ 523 if (strncmp(sc->ciss_cfg->signature, "CISS", 4)) { 524 ciss_printf(sc, "config signature mismatch (got '%c%c%c%c')\n", 525 sc->ciss_cfg->signature[0], sc->ciss_cfg->signature[1], 526 sc->ciss_cfg->signature[2], sc->ciss_cfg->signature[3]); 527 return(ENXIO); 528 } 529 if ((sc->ciss_cfg->valence < CISS_MIN_VALENCE) || 530 (sc->ciss_cfg->valence > CISS_MAX_VALENCE)) { 531 ciss_printf(sc, "adapter interface specification (%d) unsupported\n", 532 sc->ciss_cfg->valence); 533 return(ENXIO); 534 } 535 536 /* 537 * Put the board into simple mode, and tell it we're using the low 538 * 4GB of RAM. Set the default interrupt coalescing options. 539 */ 540 if (!(sc->ciss_cfg->supported_methods & CISS_TRANSPORT_METHOD_SIMPLE)) { 541 ciss_printf(sc, "adapter does not support 'simple' transport layer\n"); 542 return(ENXIO); 543 } 544 sc->ciss_cfg->requested_method = CISS_TRANSPORT_METHOD_SIMPLE; 545 sc->ciss_cfg->command_physlimit = 0; 546 sc->ciss_cfg->interrupt_coalesce_delay = CISS_INTERRUPT_COALESCE_DELAY; 547 sc->ciss_cfg->interrupt_coalesce_count = CISS_INTERRUPT_COALESCE_COUNT; 548 549 if (ciss_update_config(sc)) { 550 ciss_printf(sc, "adapter refuses to accept config update (IDBR 0x%x)\n", 551 CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_IDBR)); 552 return(ENXIO); 553 } 554 if (!(sc->ciss_cfg->active_method != CISS_TRANSPORT_METHOD_SIMPLE)) { 555 ciss_printf(sc, 556 "adapter refuses to go into 'simple' transport mode (0x%x, 0x%x)\n", 557 sc->ciss_cfg->supported_methods, sc->ciss_cfg->active_method); 558 return(ENXIO); 559 } 560 561 /* 562 * Wait for the adapter to come ready. 563 */ 564 if ((error = ciss_wait_adapter(sc)) != 0) 565 return(error); 566 567 /* 568 * Turn off interrupts before we go routing anything. 569 */ 570 CISS_TL_SIMPLE_DISABLE_INTERRUPTS(sc); 571 572 /* 573 * Allocate and set up our interrupt. 574 */ 575 sc->ciss_irq_rid = 0; 576 if ((sc->ciss_irq_resource = 577 bus_alloc_resource(sc->ciss_dev, SYS_RES_IRQ, &sc->ciss_irq_rid, 0, ~0, 1, 578 RF_ACTIVE | RF_SHAREABLE)) == NULL) { 579 ciss_printf(sc, "can't allocate interrupt\n"); 580 return(ENXIO); 581 } 582 if (bus_setup_intr(sc->ciss_dev, sc->ciss_irq_resource, INTR_TYPE_CAM, ciss_intr, sc, 583 &sc->ciss_intr)) { 584 ciss_printf(sc, "can't set up interrupt\n"); 585 return(ENXIO); 586 } 587 588 /* 589 * Allocate the parent bus DMA tag appropriate for our PCI 590 * interface. 591 * 592 * Note that "simple" adapters can only address within a 32-bit 593 * span. 594 */ 595 if (bus_dma_tag_create(NULL, /* parent */ 596 1, 0, /* alignment, boundary */ 597 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 598 BUS_SPACE_MAXADDR, /* highaddr */ 599 NULL, NULL, /* filter, filterarg */ 600 MAXBSIZE, CISS_COMMAND_SG_LENGTH, /* maxsize, nsegments */ 601 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 602 BUS_DMA_ALLOCNOW, /* flags */ 603 &sc->ciss_parent_dmat)) { 604 ciss_printf(sc, "can't allocate parent DMA tag\n"); 605 return(ENOMEM); 606 } 607 608 /* 609 * Create DMA tag for mapping buffers into adapter-addressable 610 * space. 611 */ 612 if (bus_dma_tag_create(sc->ciss_parent_dmat, /* parent */ 613 1, 0, /* alignment, boundary */ 614 BUS_SPACE_MAXADDR, /* lowaddr */ 615 BUS_SPACE_MAXADDR, /* highaddr */ 616 NULL, NULL, /* filter, filterarg */ 617 MAXBSIZE, CISS_COMMAND_SG_LENGTH, /* maxsize, nsegments */ 618 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 619 0, /* flags */ 620 &sc->ciss_buffer_dmat)) { 621 ciss_printf(sc, "can't allocate buffer DMA tag\n"); 622 return(ENOMEM); 623 } 624 return(0); 625 } 626 627 /************************************************************************ 628 * Wait for the adapter to come ready. 629 */ 630 static int 631 ciss_wait_adapter(struct ciss_softc *sc) 632 { 633 int i; 634 635 debug_called(1); 636 637 /* 638 * Wait for the adapter to come ready. 639 */ 640 if (!(sc->ciss_cfg->active_method & CISS_TRANSPORT_METHOD_READY)) { 641 ciss_printf(sc, "waiting for adapter to come ready...\n"); 642 for (i = 0; !(sc->ciss_cfg->active_method & CISS_TRANSPORT_METHOD_READY); i++) { 643 DELAY(1000000); /* one second */ 644 if (i > 30) { 645 ciss_printf(sc, "timed out waiting for adapter to come ready\n"); 646 return(EIO); 647 } 648 } 649 } 650 return(0); 651 } 652 653 /************************************************************************ 654 * Flush the adapter cache. 655 */ 656 static int 657 ciss_flush_adapter(struct ciss_softc *sc) 658 { 659 struct ciss_request *cr; 660 struct ciss_bmic_flush_cache *cbfc; 661 int error, command_status; 662 663 debug_called(1); 664 665 cr = NULL; 666 cbfc = NULL; 667 668 /* 669 * Build a BMIC request to flush the cache. We don't disable 670 * it, as we may be going to do more I/O (eg. we are emulating 671 * the Synchronise Cache command). 672 */ 673 if ((cbfc = malloc(sizeof(*cbfc), CISS_MALLOC_CLASS, M_NOWAIT | M_ZERO)) == NULL) { 674 error = ENOMEM; 675 goto out; 676 } 677 if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_FLUSH_CACHE, 678 (void **)&cbfc, sizeof(*cbfc))) != 0) 679 goto out; 680 681 /* 682 * Submit the request and wait for it to complete. 683 */ 684 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 685 ciss_printf(sc, "error sending BMIC FLUSH_CACHE command (%d)\n", error); 686 goto out; 687 } 688 689 /* 690 * Check response. 691 */ 692 ciss_report_request(cr, &command_status, NULL); 693 switch(command_status) { 694 case CISS_CMD_STATUS_SUCCESS: 695 break; 696 default: 697 ciss_printf(sc, "error flushing cache (%s)\n", 698 ciss_name_command_status(command_status)); 699 error = EIO; 700 goto out; 701 } 702 703 out: 704 if (cbfc != NULL) 705 free(cbfc, CISS_MALLOC_CLASS); 706 if (cr != NULL) 707 ciss_release_request(cr); 708 return(error); 709 } 710 711 /************************************************************************ 712 * Allocate memory for the adapter command structures, initialise 713 * the request structures. 714 * 715 * Note that the entire set of commands are allocated in a single 716 * contiguous slab. 717 */ 718 static int 719 ciss_init_requests(struct ciss_softc *sc) 720 { 721 struct ciss_request *cr; 722 int i; 723 724 debug_called(1); 725 726 /* 727 * Calculate the number of request structures/commands we are 728 * going to provide for this adapter. 729 */ 730 sc->ciss_max_requests = min(CISS_MAX_REQUESTS, sc->ciss_cfg->max_outstanding_commands); 731 732 if (1/*bootverbose*/) 733 ciss_printf(sc, "using %d of %d available commands\n", 734 sc->ciss_max_requests, sc->ciss_cfg->max_outstanding_commands); 735 736 /* 737 * Create the DMA tag for commands. 738 */ 739 if (bus_dma_tag_create(sc->ciss_parent_dmat, /* parent */ 740 1, 0, /* alignment, boundary */ 741 BUS_SPACE_MAXADDR, /* lowaddr */ 742 BUS_SPACE_MAXADDR, /* highaddr */ 743 NULL, NULL, /* filter, filterarg */ 744 CISS_COMMAND_ALLOC_SIZE * 745 sc->ciss_max_requests, 1, /* maxsize, nsegments */ 746 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 747 0, /* flags */ 748 &sc->ciss_command_dmat)) { 749 ciss_printf(sc, "can't allocate command DMA tag\n"); 750 return(ENOMEM); 751 } 752 /* 753 * Allocate memory and make it available for DMA. 754 */ 755 if (bus_dmamem_alloc(sc->ciss_command_dmat, (void **)&sc->ciss_command, 756 BUS_DMA_NOWAIT, &sc->ciss_command_map)) { 757 ciss_printf(sc, "can't allocate command memory\n"); 758 return(ENOMEM); 759 } 760 bus_dmamap_load(sc->ciss_command_dmat, sc->ciss_command_map, sc->ciss_command, 761 CISS_COMMAND_ALLOC_SIZE * sc->ciss_max_requests, 762 ciss_command_map_helper, sc, 0); 763 bzero(sc->ciss_command, CISS_COMMAND_ALLOC_SIZE * sc->ciss_max_requests); 764 765 /* 766 * Set up the request and command structures, push requests onto 767 * the free queue. 768 */ 769 for (i = 1; i < sc->ciss_max_requests; i++) { 770 cr = &sc->ciss_request[i]; 771 cr->cr_sc = sc; 772 cr->cr_tag = i; 773 bus_dmamap_create(sc->ciss_buffer_dmat, 0, &cr->cr_datamap); 774 ciss_enqueue_free(cr); 775 } 776 return(0); 777 } 778 779 static void 780 ciss_command_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error) 781 { 782 struct ciss_softc *sc = (struct ciss_softc *)arg; 783 784 sc->ciss_command_phys = segs->ds_addr; 785 } 786 787 /************************************************************************ 788 * Identify the adapter, print some information about it. 789 */ 790 static int 791 ciss_identify_adapter(struct ciss_softc *sc) 792 { 793 struct ciss_request *cr; 794 int error, command_status; 795 796 debug_called(1); 797 798 cr = NULL; 799 800 /* 801 * Get a request, allocate storage for the adapter data. 802 */ 803 if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_ID_CTLR, 804 (void **)&sc->ciss_id, 805 sizeof(*sc->ciss_id))) != 0) 806 goto out; 807 808 /* 809 * Submit the request and wait for it to complete. 810 */ 811 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 812 ciss_printf(sc, "error sending BMIC ID_CTLR command (%d)\n", error); 813 goto out; 814 } 815 816 /* 817 * Check response. 818 */ 819 ciss_report_request(cr, &command_status, NULL); 820 switch(command_status) { 821 case CISS_CMD_STATUS_SUCCESS: /* buffer right size */ 822 break; 823 case CISS_CMD_STATUS_DATA_UNDERRUN: 824 case CISS_CMD_STATUS_DATA_OVERRUN: 825 ciss_printf(sc, "data over/underrun reading adapter information\n"); 826 default: 827 ciss_printf(sc, "error reading adapter information (%s)\n", 828 ciss_name_command_status(command_status)); 829 error = EIO; 830 goto out; 831 } 832 833 /* sanity-check reply */ 834 if (!sc->ciss_id->big_map_supported) { 835 ciss_printf(sc, "adapter does not support BIG_MAP\n"); 836 error = ENXIO; 837 goto out; 838 } 839 840 #if 0 841 /* XXX later revisions may not need this */ 842 sc->ciss_flags |= CISS_FLAG_FAKE_SYNCH; 843 #endif 844 845 /* XXX only really required for old 5300 adapters? */ 846 sc->ciss_flags |= CISS_FLAG_BMIC_ABORT; 847 848 /* print information */ 849 if (1/*bootverbose*/) { 850 ciss_printf(sc, " %d logical drive%s configured\n", 851 sc->ciss_id->configured_logical_drives, 852 (sc->ciss_id->configured_logical_drives == 1) ? "" : "s"); 853 ciss_printf(sc, " firmware %4.4s\n", sc->ciss_id->running_firmware_revision); 854 ciss_printf(sc, " %d SCSI channels\n", sc->ciss_id->scsi_bus_count); 855 856 ciss_printf(sc, " signature '%.4s'\n", sc->ciss_cfg->signature); 857 ciss_printf(sc, " valence %d\n", sc->ciss_cfg->valence); 858 ciss_printf(sc, " supported I/O methods 0x%b\n", 859 sc->ciss_cfg->supported_methods, 860 "\20\1READY\2simple\3performant\4MEMQ\n"); 861 ciss_printf(sc, " active I/O method 0x%b\n", 862 sc->ciss_cfg->active_method, "\20\2simple\3performant\4MEMQ\n"); 863 ciss_printf(sc, " 4G page base 0x%08x\n", 864 sc->ciss_cfg->command_physlimit); 865 ciss_printf(sc, " interrupt coalesce delay %dus\n", 866 sc->ciss_cfg->interrupt_coalesce_delay); 867 ciss_printf(sc, " interrupt coalesce count %d\n", 868 sc->ciss_cfg->interrupt_coalesce_count); 869 ciss_printf(sc, " max outstanding commands %d\n", 870 sc->ciss_cfg->max_outstanding_commands); 871 ciss_printf(sc, " bus types 0x%b\n", sc->ciss_cfg->bus_types, 872 "\20\1ultra2\2ultra3\10fibre1\11fibre2\n"); 873 ciss_printf(sc, " server name '%.16s'\n", sc->ciss_cfg->server_name); 874 ciss_printf(sc, " heartbeat 0x%x\n", sc->ciss_cfg->heartbeat); 875 } 876 877 out: 878 if (error) { 879 if (sc->ciss_id != NULL) { 880 free(sc->ciss_id, CISS_MALLOC_CLASS); 881 sc->ciss_id = NULL; 882 } 883 } 884 if (cr != NULL) 885 ciss_release_request(cr); 886 return(error); 887 } 888 889 /************************************************************************ 890 * Find logical drives on the adapter. 891 */ 892 static int 893 ciss_init_logical(struct ciss_softc *sc) 894 { 895 struct ciss_request *cr; 896 struct ciss_command *cc; 897 struct ciss_report_cdb *crc; 898 struct ciss_lun_report *cll; 899 int error, i; 900 size_t report_size; 901 int ndrives; 902 int command_status; 903 904 debug_called(1); 905 906 cr = NULL; 907 cll = NULL; 908 909 /* 910 * Get a request, allocate storage for the address list. 911 */ 912 if ((error = ciss_get_request(sc, &cr)) != 0) 913 goto out; 914 report_size = sizeof(*cll) + CISS_MAX_LOGICAL * sizeof(union ciss_device_address); 915 if ((cll = malloc(report_size, CISS_MALLOC_CLASS, M_NOWAIT | M_ZERO)) == NULL) { 916 ciss_printf(sc, "can't allocate memory for logical drive list\n"); 917 error = ENOMEM; 918 goto out; 919 } 920 921 /* 922 * Build the Report Logical LUNs command. 923 */ 924 cc = CISS_FIND_COMMAND(cr); 925 cr->cr_data = cll; 926 cr->cr_length = report_size; 927 cr->cr_flags = CISS_REQ_DATAIN; 928 929 cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL; 930 cc->header.address.physical.bus = 0; 931 cc->header.address.physical.target = 0; 932 cc->cdb.cdb_length = sizeof(*crc); 933 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 934 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 935 cc->cdb.direction = CISS_CDB_DIRECTION_READ; 936 cc->cdb.timeout = 30; /* XXX better suggestions? */ 937 938 crc = (struct ciss_report_cdb *)&(cc->cdb.cdb[0]); 939 bzero(crc, sizeof(*crc)); 940 crc->opcode = CISS_OPCODE_REPORT_LOGICAL_LUNS; 941 crc->length = htonl(report_size); /* big-endian field */ 942 cll->list_size = htonl(report_size - sizeof(*cll)); /* big-endian field */ 943 944 /* 945 * Submit the request and wait for it to complete. (timeout 946 * here should be much greater than above) 947 */ 948 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 949 ciss_printf(sc, "error sending Report Logical LUNs command (%d)\n", error); 950 goto out; 951 } 952 953 /* 954 * Check response. Note that data over/underrun is OK. 955 */ 956 ciss_report_request(cr, &command_status, NULL); 957 switch(command_status) { 958 case CISS_CMD_STATUS_SUCCESS: /* buffer right size */ 959 case CISS_CMD_STATUS_DATA_UNDERRUN: /* buffer too large, not bad */ 960 break; 961 case CISS_CMD_STATUS_DATA_OVERRUN: 962 ciss_printf(sc, "WARNING: more logical drives than driver limit (%d), adjust CISS_MAX_LOGICAL\n", 963 CISS_MAX_LOGICAL); 964 break; 965 default: 966 ciss_printf(sc, "error detecting logical drive configuration (%s)\n", 967 ciss_name_command_status(command_status)); 968 error = EIO; 969 goto out; 970 } 971 ciss_release_request(cr); 972 cr = NULL; 973 974 /* sanity-check reply */ 975 ndrives = (ntohl(cll->list_size) / sizeof(union ciss_device_address)); 976 if ((ndrives < 0) || (ndrives >= CISS_MAX_LOGICAL)) { 977 ciss_printf(sc, "adapter claims to report absurd number of logical drives (%d > %d)\n", 978 ndrives, CISS_MAX_LOGICAL); 979 return(ENXIO); 980 } 981 982 /* 983 * Save logical drive information. 984 */ 985 if (1/*bootverbose*/) 986 ciss_printf(sc, "%d logical drive%s\n", ndrives, (ndrives > 1) ? "s" : ""); 987 if (ndrives != sc->ciss_id->configured_logical_drives) 988 ciss_printf(sc, "logical drive map claims %d drives, but adapter claims %d\n", 989 ndrives, sc->ciss_id->configured_logical_drives); 990 for (i = 0; i < CISS_MAX_LOGICAL; i++) { 991 if (i < ndrives) { 992 sc->ciss_logical[i].cl_address = cll->lun[i]; /* XXX endianness? */ 993 if (ciss_identify_logical(sc, &sc->ciss_logical[i]) != 0) 994 continue; 995 /* 996 * If the drive has had media exchanged, we should bring it online. 997 */ 998 if (sc->ciss_logical[i].cl_lstatus->media_exchanged) 999 ciss_accept_media(sc, i, 0); 1000 1001 } else { 1002 sc->ciss_logical[i].cl_status = CISS_LD_NONEXISTENT; 1003 } 1004 } 1005 error = 0; 1006 1007 out: 1008 /* 1009 * Note that if the error is a timeout, we are taking a slight 1010 * risk here and assuming that the adapter will not respond at a 1011 * later time, scribbling over host memory. 1012 */ 1013 if (cr != NULL) 1014 ciss_release_request(cr); 1015 if (cll != NULL) 1016 free(cll, CISS_MALLOC_CLASS); 1017 return(error); 1018 } 1019 1020 static int 1021 ciss_inquiry_logical(struct ciss_softc *sc, struct ciss_ldrive *ld) 1022 { 1023 struct ciss_request *cr; 1024 struct ciss_command *cc; 1025 struct scsi_inquiry *inq; 1026 int error; 1027 int command_status; 1028 int lun; 1029 1030 cr = NULL; 1031 lun = ld->cl_address.logical.lun; 1032 1033 bzero(&ld->cl_geometry, sizeof(ld->cl_geometry)); 1034 1035 if ((error = ciss_get_request(sc, &cr)) != 0) 1036 goto out; 1037 1038 cc = CISS_FIND_COMMAND(cr); 1039 cr->cr_data = &ld->cl_geometry; 1040 cr->cr_length = sizeof(ld->cl_geometry); 1041 cr->cr_flags = CISS_REQ_DATAIN; 1042 1043 cc->header.address.logical.mode = CISS_HDR_ADDRESS_MODE_LOGICAL; 1044 cc->header.address.logical.lun = lun; 1045 cc->cdb.cdb_length = 6; 1046 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 1047 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 1048 cc->cdb.direction = CISS_CDB_DIRECTION_READ; 1049 cc->cdb.timeout = 30; 1050 1051 inq = (struct scsi_inquiry *)&(cc->cdb.cdb[0]); 1052 inq->opcode = INQUIRY; 1053 inq->byte2 = SI_EVPD; 1054 inq->page_code = CISS_VPD_LOGICAL_DRIVE_GEOMETRY; 1055 inq->length = sizeof(ld->cl_geometry); 1056 1057 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 1058 ciss_printf(sc, "error getting geometry (%d)\n", error); 1059 goto out; 1060 } 1061 1062 ciss_report_request(cr, &command_status, NULL); 1063 switch(command_status) { 1064 case CISS_CMD_STATUS_SUCCESS: 1065 case CISS_CMD_STATUS_DATA_UNDERRUN: 1066 break; 1067 case CISS_CMD_STATUS_DATA_OVERRUN: 1068 ciss_printf(sc, "WARNING: Data overrun\n"); 1069 break; 1070 default: 1071 ciss_printf(sc, "Error detecting logical drive geometry (%s)\n", 1072 ciss_name_command_status(command_status)); 1073 break; 1074 } 1075 1076 out: 1077 if (cr != NULL) 1078 ciss_release_request(cr); 1079 return(error); 1080 } 1081 /************************************************************************ 1082 * Identify a logical drive, initialise state related to it. 1083 */ 1084 static int 1085 ciss_identify_logical(struct ciss_softc *sc, struct ciss_ldrive *ld) 1086 { 1087 struct ciss_request *cr; 1088 struct ciss_command *cc; 1089 struct ciss_bmic_cdb *cbc; 1090 int error, command_status; 1091 1092 debug_called(1); 1093 1094 cr = NULL; 1095 1096 /* 1097 * Build a BMIC request to fetch the drive ID. 1098 */ 1099 if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_ID_LDRIVE, 1100 (void **)&ld->cl_ldrive, 1101 sizeof(*ld->cl_ldrive))) != 0) 1102 goto out; 1103 cc = CISS_FIND_COMMAND(cr); 1104 cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]); 1105 cbc->log_drive = ld->cl_address.logical.lun; 1106 1107 /* 1108 * Submit the request and wait for it to complete. 1109 */ 1110 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 1111 ciss_printf(sc, "error sending BMIC LDRIVE command (%d)\n", error); 1112 goto out; 1113 } 1114 1115 /* 1116 * Check response. 1117 */ 1118 ciss_report_request(cr, &command_status, NULL); 1119 switch(command_status) { 1120 case CISS_CMD_STATUS_SUCCESS: /* buffer right size */ 1121 break; 1122 case CISS_CMD_STATUS_DATA_UNDERRUN: 1123 case CISS_CMD_STATUS_DATA_OVERRUN: 1124 ciss_printf(sc, "data over/underrun reading logical drive ID\n"); 1125 default: 1126 ciss_printf(sc, "error reading logical drive ID (%s)\n", 1127 ciss_name_command_status(command_status)); 1128 error = EIO; 1129 goto out; 1130 } 1131 ciss_release_request(cr); 1132 cr = NULL; 1133 1134 /* 1135 * Build a CISS BMIC command to get the logical drive status. 1136 */ 1137 if ((error = ciss_get_ldrive_status(sc, ld)) != 0) 1138 goto out; 1139 1140 /* 1141 * Get the logical drive geometry. 1142 */ 1143 if ((error = ciss_inquiry_logical(sc, ld)) != 0) 1144 goto out; 1145 1146 /* 1147 * Print the drive's basic characteristics. 1148 */ 1149 if (1/*bootverbose*/) { 1150 ciss_printf(sc, "logical drive %d: %s, %dMB ", 1151 cbc->log_drive, ciss_name_ldrive_org(ld->cl_ldrive->fault_tolerance), 1152 ((ld->cl_ldrive->blocks_available / (1024 * 1024)) * 1153 ld->cl_ldrive->block_size)); 1154 1155 ciss_print_ldrive(sc, ld); 1156 } 1157 out: 1158 if (error != 0) { 1159 /* make the drive not-exist */ 1160 ld->cl_status = CISS_LD_NONEXISTENT; 1161 if (ld->cl_ldrive != NULL) { 1162 free(ld->cl_ldrive, CISS_MALLOC_CLASS); 1163 ld->cl_ldrive = NULL; 1164 } 1165 if (ld->cl_lstatus != NULL) { 1166 free(ld->cl_lstatus, CISS_MALLOC_CLASS); 1167 ld->cl_lstatus = NULL; 1168 } 1169 } 1170 if (cr != NULL) 1171 ciss_release_request(cr); 1172 1173 return(error); 1174 } 1175 1176 /************************************************************************ 1177 * Get status for a logical drive. 1178 * 1179 * XXX should we also do this in response to Test Unit Ready? 1180 */ 1181 static int 1182 ciss_get_ldrive_status(struct ciss_softc *sc, struct ciss_ldrive *ld) 1183 { 1184 struct ciss_request *cr; 1185 struct ciss_command *cc; 1186 struct ciss_bmic_cdb *cbc; 1187 int error, command_status; 1188 1189 /* 1190 * Build a CISS BMIC command to get the logical drive status. 1191 */ 1192 if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_ID_LSTATUS, 1193 (void **)&ld->cl_lstatus, 1194 sizeof(*ld->cl_lstatus))) != 0) 1195 goto out; 1196 cc = CISS_FIND_COMMAND(cr); 1197 cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]); 1198 cbc->log_drive = ld->cl_address.logical.lun; 1199 1200 /* 1201 * Submit the request and wait for it to complete. 1202 */ 1203 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 1204 ciss_printf(sc, "error sending BMIC LSTATUS command (%d)\n", error); 1205 goto out; 1206 } 1207 1208 /* 1209 * Check response. 1210 */ 1211 ciss_report_request(cr, &command_status, NULL); 1212 switch(command_status) { 1213 case CISS_CMD_STATUS_SUCCESS: /* buffer right size */ 1214 break; 1215 case CISS_CMD_STATUS_DATA_UNDERRUN: 1216 case CISS_CMD_STATUS_DATA_OVERRUN: 1217 ciss_printf(sc, "data over/underrun reading logical drive status\n"); 1218 default: 1219 ciss_printf(sc, "error reading logical drive status (%s)\n", 1220 ciss_name_command_status(command_status)); 1221 error = EIO; 1222 goto out; 1223 } 1224 1225 /* 1226 * Set the drive's summary status based on the returned status. 1227 * 1228 * XXX testing shows that a failed JBOD drive comes back at next 1229 * boot in "queued for expansion" mode. WTF? 1230 */ 1231 ld->cl_status = ciss_decode_ldrive_status(ld->cl_lstatus->status); 1232 1233 out: 1234 if (cr != NULL) 1235 ciss_release_request(cr); 1236 return(error); 1237 } 1238 1239 /************************************************************************ 1240 * Notify the adapter of a config update. 1241 */ 1242 static int 1243 ciss_update_config(struct ciss_softc *sc) 1244 { 1245 int i; 1246 1247 debug_called(1); 1248 1249 CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IDBR, CISS_TL_SIMPLE_IDBR_CFG_TABLE); 1250 for (i = 0; i < 1000; i++) { 1251 if (!(CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_IDBR) & 1252 CISS_TL_SIMPLE_IDBR_CFG_TABLE)) { 1253 return(0); 1254 } 1255 DELAY(1000); 1256 } 1257 return(1); 1258 } 1259 1260 /************************************************************************ 1261 * Accept new media into a logical drive. 1262 * 1263 * XXX The drive has previously been offline; it would be good if we 1264 * could make sure it's not open right now. 1265 */ 1266 static int 1267 ciss_accept_media(struct ciss_softc *sc, int ldrive, int async) 1268 { 1269 struct ciss_request *cr; 1270 struct ciss_command *cc; 1271 struct ciss_bmic_cdb *cbc; 1272 int error; 1273 1274 debug(0, "bringing logical drive %d back online %ssynchronously", 1275 ldrive, async ? "a" : ""); 1276 1277 /* 1278 * Build a CISS BMIC command to bring the drive back online. 1279 */ 1280 if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_ACCEPT_MEDIA, 1281 NULL, 0)) != 0) 1282 goto out; 1283 cc = CISS_FIND_COMMAND(cr); 1284 cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]); 1285 cbc->log_drive = ldrive; 1286 1287 /* 1288 * Dispatch the request asynchronously if we can't sleep waiting 1289 * for it to complete. 1290 */ 1291 if (async) { 1292 cr->cr_complete = ciss_accept_media_complete; 1293 if ((error = ciss_start(cr)) != 0) 1294 goto out; 1295 return(0); 1296 } else { 1297 /* 1298 * Submit the request and wait for it to complete. 1299 */ 1300 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 1301 ciss_printf(sc, "error sending BMIC LSTATUS command (%d)\n", error); 1302 goto out; 1303 } 1304 } 1305 1306 /* 1307 * Call the completion callback manually. 1308 */ 1309 ciss_accept_media_complete(cr); 1310 return(0); 1311 1312 out: 1313 if (cr != NULL) 1314 ciss_release_request(cr); 1315 return(error); 1316 } 1317 1318 static void 1319 ciss_accept_media_complete(struct ciss_request *cr) 1320 { 1321 int command_status; 1322 1323 /* 1324 * Check response. 1325 */ 1326 ciss_report_request(cr, &command_status, NULL); 1327 switch(command_status) { 1328 case CISS_CMD_STATUS_SUCCESS: /* all OK */ 1329 /* we should get a logical drive status changed event here */ 1330 break; 1331 default: 1332 ciss_printf(cr->cr_sc, "error accepting media into failed logical drive (%s)\n", 1333 ciss_name_command_status(command_status)); 1334 break; 1335 } 1336 ciss_release_request(cr); 1337 } 1338 1339 /************************************************************************ 1340 * Release adapter resources. 1341 */ 1342 static void 1343 ciss_free(struct ciss_softc *sc) 1344 { 1345 struct ciss_request *cr; 1346 1347 debug_called(1); 1348 1349 /* we're going away */ 1350 sc->ciss_flags |= CISS_FLAG_ABORTING; 1351 1352 /* terminate the periodic heartbeat routine */ 1353 untimeout(ciss_periodic, sc, sc->ciss_periodic); 1354 1355 /* cancel the Event Notify chain */ 1356 ciss_notify_abort(sc); 1357 1358 /* free the controller data */ 1359 if (sc->ciss_id != NULL) 1360 free(sc->ciss_id, CISS_MALLOC_CLASS); 1361 1362 /* release I/O resources */ 1363 if (sc->ciss_regs_resource != NULL) 1364 bus_release_resource(sc->ciss_dev, SYS_RES_MEMORY, 1365 sc->ciss_regs_rid, sc->ciss_regs_resource); 1366 if (sc->ciss_cfg_resource != NULL) 1367 bus_release_resource(sc->ciss_dev, SYS_RES_MEMORY, 1368 sc->ciss_cfg_rid, sc->ciss_cfg_resource); 1369 if (sc->ciss_intr != NULL) 1370 bus_teardown_intr(sc->ciss_dev, sc->ciss_irq_resource, sc->ciss_intr); 1371 if (sc->ciss_irq_resource != NULL) 1372 bus_release_resource(sc->ciss_dev, SYS_RES_IRQ, 1373 sc->ciss_irq_rid, sc->ciss_irq_resource); 1374 1375 /* destroy DMA tags */ 1376 if (sc->ciss_parent_dmat) 1377 bus_dma_tag_destroy(sc->ciss_parent_dmat); 1378 1379 while ((cr = ciss_dequeue_free(sc)) != NULL) 1380 bus_dmamap_destroy(sc->ciss_buffer_dmat, cr->cr_datamap); 1381 if (sc->ciss_buffer_dmat) 1382 bus_dma_tag_destroy(sc->ciss_buffer_dmat); 1383 1384 /* destroy command memory and DMA tag */ 1385 if (sc->ciss_command != NULL) { 1386 bus_dmamap_unload(sc->ciss_command_dmat, sc->ciss_command_map); 1387 bus_dmamem_free(sc->ciss_command_dmat, sc->ciss_command, sc->ciss_command_map); 1388 } 1389 if (sc->ciss_command_dmat) 1390 bus_dma_tag_destroy(sc->ciss_command_dmat); 1391 1392 /* disconnect from CAM */ 1393 if (sc->ciss_cam_sim) { 1394 xpt_bus_deregister(cam_sim_path(sc->ciss_cam_sim)); 1395 cam_sim_free(sc->ciss_cam_sim, 0); 1396 } 1397 if (sc->ciss_cam_devq) 1398 cam_simq_free(sc->ciss_cam_devq); 1399 /* XXX what about ciss_cam_path? */ 1400 } 1401 1402 /************************************************************************ 1403 * Give a command to the adapter. 1404 * 1405 * Note that this uses the simple transport layer directly. If we 1406 * want to add support for other layers, we'll need a switch of some 1407 * sort. 1408 * 1409 * Note that the simple transport layer has no way of refusing a 1410 * command; we only have as many request structures as the adapter 1411 * supports commands, so we don't have to check (this presumes that 1412 * the adapter can handle commands as fast as we throw them at it). 1413 */ 1414 static int 1415 ciss_start(struct ciss_request *cr) 1416 { 1417 struct ciss_command *cc; /* XXX debugging only */ 1418 int error; 1419 1420 cc = CISS_FIND_COMMAND(cr); 1421 debug(2, "post command %d tag %d ", cr->cr_tag, cc->header.host_tag); 1422 1423 /* 1424 * Map the request's data. 1425 */ 1426 if ((error = ciss_map_request(cr))) 1427 return(error); 1428 1429 #if 0 1430 ciss_print_request(cr); 1431 #endif 1432 1433 /* 1434 * Post the command to the adapter. 1435 */ 1436 ciss_enqueue_busy(cr); 1437 CISS_TL_SIMPLE_POST_CMD(cr->cr_sc, CISS_FIND_COMMANDPHYS(cr)); 1438 1439 return(0); 1440 } 1441 1442 /************************************************************************ 1443 * Fetch completed request(s) from the adapter, queue them for 1444 * completion handling. 1445 * 1446 * Note that this uses the simple transport layer directly. If we 1447 * want to add support for other layers, we'll need a switch of some 1448 * sort. 1449 * 1450 * Note that the simple transport mechanism does not require any 1451 * reentrancy protection; the OPQ read is atomic. If there is a 1452 * chance of a race with something else that might move the request 1453 * off the busy list, then we will have to lock against that 1454 * (eg. timeouts, etc.) 1455 */ 1456 static void 1457 ciss_done(struct ciss_softc *sc) 1458 { 1459 struct ciss_request *cr; 1460 struct ciss_command *cc; 1461 u_int32_t tag, index; 1462 int complete; 1463 1464 debug_called(3); 1465 1466 /* 1467 * Loop quickly taking requests from the adapter and moving them 1468 * from the busy queue to the completed queue. 1469 */ 1470 complete = 0; 1471 for (;;) { 1472 1473 /* see if the OPQ contains anything */ 1474 if (!CISS_TL_SIMPLE_OPQ_INTERRUPT(sc)) 1475 break; 1476 1477 tag = CISS_TL_SIMPLE_FETCH_CMD(sc); 1478 if (tag == CISS_TL_SIMPLE_OPQ_EMPTY) 1479 break; 1480 index = tag >> 2; 1481 debug(2, "completed command %d%s", index, 1482 (tag & CISS_HDR_HOST_TAG_ERROR) ? " with error" : ""); 1483 if (index >= sc->ciss_max_requests) { 1484 ciss_printf(sc, "completed invalid request %d (0x%x)\n", index, tag); 1485 continue; 1486 } 1487 cr = &(sc->ciss_request[index]); 1488 cc = CISS_FIND_COMMAND(cr); 1489 cc->header.host_tag = tag; /* not updated by adapter */ 1490 if (ciss_remove_busy(cr)) { 1491 /* assume this is garbage out of the adapter */ 1492 ciss_printf(sc, "completed nonbusy request %d\n", index); 1493 } else { 1494 ciss_enqueue_complete(cr); 1495 } 1496 complete = 1; 1497 } 1498 1499 /* 1500 * Invoke completion processing. If we can defer this out of 1501 * interrupt context, that'd be good. 1502 */ 1503 if (complete) 1504 ciss_complete(sc); 1505 } 1506 1507 /************************************************************************ 1508 * Take an interrupt from the adapter. 1509 */ 1510 static void 1511 ciss_intr(void *arg) 1512 { 1513 struct ciss_softc *sc = (struct ciss_softc *)arg; 1514 1515 /* 1516 * The only interrupt we recognise indicates that there are 1517 * entries in the outbound post queue. 1518 */ 1519 ciss_done(sc); 1520 } 1521 1522 /************************************************************************ 1523 * Process completed requests. 1524 * 1525 * Requests can be completed in three fashions: 1526 * 1527 * - by invoking a callback function (cr_complete is non-null) 1528 * - by waking up a sleeper (cr_flags has CISS_REQ_SLEEP set) 1529 * - by clearing the CISS_REQ_POLL flag in interrupt/timeout context 1530 */ 1531 static void 1532 ciss_complete(struct ciss_softc *sc) 1533 { 1534 struct ciss_request *cr; 1535 1536 debug_called(2); 1537 1538 /* 1539 * Loop taking requests off the completed queue and performing 1540 * completion processing on them. 1541 */ 1542 for (;;) { 1543 if ((cr = ciss_dequeue_complete(sc)) == NULL) 1544 break; 1545 ciss_unmap_request(cr); 1546 1547 /* 1548 * If the request has a callback, invoke it. 1549 */ 1550 if (cr->cr_complete != NULL) { 1551 cr->cr_complete(cr); 1552 continue; 1553 } 1554 1555 /* 1556 * If someone is sleeping on this request, wake them up. 1557 */ 1558 if (cr->cr_flags & CISS_REQ_SLEEP) { 1559 cr->cr_flags &= ~CISS_REQ_SLEEP; 1560 wakeup(cr); 1561 continue; 1562 } 1563 1564 /* 1565 * If someone is polling this request for completion, signal. 1566 */ 1567 if (cr->cr_flags & CISS_REQ_POLL) { 1568 cr->cr_flags &= ~CISS_REQ_POLL; 1569 continue; 1570 } 1571 1572 /* 1573 * Give up and throw the request back on the free queue. This 1574 * should never happen; resources will probably be lost. 1575 */ 1576 ciss_printf(sc, "WARNING: completed command with no submitter\n"); 1577 ciss_enqueue_free(cr); 1578 } 1579 } 1580 1581 /************************************************************************ 1582 * Report on the completion status of a request, and pass back SCSI 1583 * and command status values. 1584 */ 1585 static int 1586 ciss_report_request(struct ciss_request *cr, int *command_status, int *scsi_status) 1587 { 1588 struct ciss_command *cc; 1589 struct ciss_error_info *ce; 1590 1591 debug_called(2); 1592 1593 cc = CISS_FIND_COMMAND(cr); 1594 ce = (struct ciss_error_info *)&(cc->sg[0]); 1595 1596 /* 1597 * We don't consider data under/overrun an error for the Report 1598 * Logical/Physical LUNs commands. 1599 */ 1600 if ((cc->header.host_tag & CISS_HDR_HOST_TAG_ERROR) && 1601 ((cc->cdb.cdb[0] == CISS_OPCODE_REPORT_LOGICAL_LUNS) || 1602 (cc->cdb.cdb[0] == CISS_OPCODE_REPORT_PHYSICAL_LUNS))) { 1603 cc->header.host_tag &= ~CISS_HDR_HOST_TAG_ERROR; 1604 debug(2, "ignoring irrelevant under/overrun error"); 1605 } 1606 1607 /* 1608 * Check the command's error bit, if clear, there's no status and 1609 * everything is OK. 1610 */ 1611 if (!(cc->header.host_tag & CISS_HDR_HOST_TAG_ERROR)) { 1612 if (scsi_status != NULL) 1613 *scsi_status = SCSI_STATUS_OK; 1614 if (command_status != NULL) 1615 *command_status = CISS_CMD_STATUS_SUCCESS; 1616 return(0); 1617 } else { 1618 if (command_status != NULL) 1619 *command_status = ce->command_status; 1620 if (scsi_status != NULL) { 1621 if (ce->command_status == CISS_CMD_STATUS_TARGET_STATUS) { 1622 *scsi_status = ce->scsi_status; 1623 } else { 1624 *scsi_status = -1; 1625 } 1626 } 1627 if (bootverbose) 1628 ciss_printf(cr->cr_sc, "command status 0x%x (%s) scsi status 0x%x\n", 1629 ce->command_status, ciss_name_command_status(ce->command_status), 1630 ce->scsi_status); 1631 if (ce->command_status == CISS_CMD_STATUS_INVALID_COMMAND) { 1632 ciss_printf(cr->cr_sc, "invalid command, offense size %d at %d, value 0x%x\n", 1633 ce->additional_error_info.invalid_command.offense_size, 1634 ce->additional_error_info.invalid_command.offense_offset, 1635 ce->additional_error_info.invalid_command.offense_value); 1636 } 1637 } 1638 return(1); 1639 } 1640 1641 /************************************************************************ 1642 * Issue a request and don't return until it's completed. 1643 * 1644 * Depending on adapter status, we may poll or sleep waiting for 1645 * completion. 1646 */ 1647 static int 1648 ciss_synch_request(struct ciss_request *cr, int timeout) 1649 { 1650 if (cr->cr_sc->ciss_flags & CISS_FLAG_RUNNING) { 1651 return(ciss_wait_request(cr, timeout)); 1652 } else { 1653 return(ciss_poll_request(cr, timeout)); 1654 } 1655 } 1656 1657 /************************************************************************ 1658 * Issue a request and poll for completion. 1659 * 1660 * Timeout in milliseconds. 1661 */ 1662 static int 1663 ciss_poll_request(struct ciss_request *cr, int timeout) 1664 { 1665 int error; 1666 1667 debug_called(2); 1668 1669 cr->cr_flags |= CISS_REQ_POLL; 1670 if ((error = ciss_start(cr)) != 0) 1671 return(error); 1672 1673 do { 1674 ciss_done(cr->cr_sc); 1675 if (!(cr->cr_flags & CISS_REQ_POLL)) 1676 return(0); 1677 DELAY(1000); 1678 } while (timeout-- >= 0); 1679 return(EWOULDBLOCK); 1680 } 1681 1682 /************************************************************************ 1683 * Issue a request and sleep waiting for completion. 1684 * 1685 * Timeout in milliseconds. Note that a spurious wakeup will reset 1686 * the timeout. 1687 */ 1688 static int 1689 ciss_wait_request(struct ciss_request *cr, int timeout) 1690 { 1691 int s, error; 1692 1693 debug_called(2); 1694 1695 cr->cr_flags |= CISS_REQ_SLEEP; 1696 if ((error = ciss_start(cr)) != 0) 1697 return(error); 1698 1699 s = splcam(); 1700 while (cr->cr_flags & CISS_REQ_SLEEP) { 1701 error = tsleep(cr, PCATCH, "cissREQ", (timeout * hz) / 1000); 1702 /* 1703 * On wakeup or interruption due to restartable activity, go 1704 * back and check to see if we're done. 1705 */ 1706 if ((error == 0) || (error == ERESTART)) { 1707 error = 0; 1708 continue; 1709 } 1710 /* 1711 * Timeout, interrupted system call, etc. 1712 */ 1713 break; 1714 } 1715 splx(s); 1716 return(error); 1717 } 1718 1719 #if 0 1720 /************************************************************************ 1721 * Abort a request. Note that a potential exists here to race the 1722 * request being completed; the caller must deal with this. 1723 */ 1724 static int 1725 ciss_abort_request(struct ciss_request *ar) 1726 { 1727 struct ciss_request *cr; 1728 struct ciss_command *cc; 1729 struct ciss_message_cdb *cmc; 1730 int error; 1731 1732 debug_called(1); 1733 1734 /* get a request */ 1735 if ((error = ciss_get_request(ar->cr_sc, &cr)) != 0) 1736 return(error); 1737 1738 /* build the abort command */ 1739 cc = CISS_FIND_COMMAND(cr); 1740 cc->header.address.mode.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL; /* addressing? */ 1741 cc->header.address.physical.target = 0; 1742 cc->header.address.physical.bus = 0; 1743 cc->cdb.cdb_length = sizeof(*cmc); 1744 cc->cdb.type = CISS_CDB_TYPE_MESSAGE; 1745 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 1746 cc->cdb.direction = CISS_CDB_DIRECTION_NONE; 1747 cc->cdb.timeout = 30; 1748 1749 cmc = (struct ciss_message_cdb *)&(cc->cdb.cdb[0]); 1750 cmc->opcode = CISS_OPCODE_MESSAGE_ABORT; 1751 cmc->type = CISS_MESSAGE_ABORT_TASK; 1752 cmc->abort_tag = ar->cr_tag; /* endianness?? */ 1753 1754 /* 1755 * Send the request and wait for a response. If we believe we 1756 * aborted the request OK, clear the flag that indicates it's 1757 * running. 1758 */ 1759 error = ciss_synch_request(cr, 35 * 1000); 1760 if (!error) 1761 error = ciss_report_request(cr, NULL, NULL); 1762 ciss_release_request(cr); 1763 1764 return(error); 1765 } 1766 #endif 1767 1768 1769 /************************************************************************ 1770 * Fetch and initialise a request 1771 */ 1772 static int 1773 ciss_get_request(struct ciss_softc *sc, struct ciss_request **crp) 1774 { 1775 struct ciss_request *cr; 1776 1777 debug_called(2); 1778 1779 /* 1780 * Get a request and clean it up. 1781 */ 1782 if ((cr = ciss_dequeue_free(sc)) == NULL) 1783 return(ENOMEM); 1784 1785 cr->cr_data = NULL; 1786 cr->cr_flags = 0; 1787 cr->cr_complete = NULL; 1788 1789 ciss_preen_command(cr); 1790 *crp = cr; 1791 return(0); 1792 } 1793 1794 static void 1795 ciss_preen_command(struct ciss_request *cr) 1796 { 1797 struct ciss_command *cc; 1798 u_int32_t cmdphys; 1799 1800 /* 1801 * Clean up the command structure. 1802 * 1803 * Note that we set up the error_info structure here, since the 1804 * length can be overwritten by any command. 1805 */ 1806 cc = CISS_FIND_COMMAND(cr); 1807 cc->header.sg_in_list = 0; /* kinda inefficient this way */ 1808 cc->header.sg_total = 0; 1809 cc->header.host_tag = cr->cr_tag << 2; 1810 cc->header.host_tag_zeroes = 0; 1811 cmdphys = CISS_FIND_COMMANDPHYS(cr); 1812 cc->error_info.error_info_address = cmdphys + sizeof(struct ciss_command); 1813 cc->error_info.error_info_length = CISS_COMMAND_ALLOC_SIZE - sizeof(struct ciss_command); 1814 1815 } 1816 1817 /************************************************************************ 1818 * Release a request to the free list. 1819 */ 1820 static void 1821 ciss_release_request(struct ciss_request *cr) 1822 { 1823 struct ciss_softc *sc; 1824 1825 debug_called(2); 1826 1827 sc = cr->cr_sc; 1828 1829 /* release the request to the free queue */ 1830 ciss_requeue_free(cr); 1831 } 1832 1833 /************************************************************************ 1834 * Allocate a request that will be used to send a BMIC command. Do some 1835 * of the common setup here to avoid duplicating it everywhere else. 1836 */ 1837 static int 1838 ciss_get_bmic_request(struct ciss_softc *sc, struct ciss_request **crp, 1839 int opcode, void **bufp, size_t bufsize) 1840 { 1841 struct ciss_request *cr; 1842 struct ciss_command *cc; 1843 struct ciss_bmic_cdb *cbc; 1844 void *buf; 1845 int error; 1846 int dataout; 1847 1848 debug_called(2); 1849 1850 cr = NULL; 1851 buf = NULL; 1852 1853 /* 1854 * Get a request. 1855 */ 1856 if ((error = ciss_get_request(sc, &cr)) != 0) 1857 goto out; 1858 1859 /* 1860 * Allocate data storage if requested, determine the data direction. 1861 */ 1862 dataout = 0; 1863 if ((bufsize > 0) && (bufp != NULL)) { 1864 if (*bufp == NULL) { 1865 if ((buf = malloc(bufsize, CISS_MALLOC_CLASS, M_NOWAIT | M_ZERO)) == NULL) { 1866 error = ENOMEM; 1867 goto out; 1868 } 1869 } else { 1870 buf = *bufp; 1871 dataout = 1; /* we are given a buffer, so we are writing */ 1872 } 1873 } 1874 1875 /* 1876 * Build a CISS BMIC command to get the logical drive ID. 1877 */ 1878 cr->cr_data = buf; 1879 cr->cr_length = bufsize; 1880 if (!dataout) 1881 cr->cr_flags = CISS_REQ_DATAIN; 1882 1883 cc = CISS_FIND_COMMAND(cr); 1884 cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL; 1885 cc->header.address.physical.bus = 0; 1886 cc->header.address.physical.target = 0; 1887 cc->cdb.cdb_length = sizeof(*cbc); 1888 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 1889 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 1890 cc->cdb.direction = dataout ? CISS_CDB_DIRECTION_WRITE : CISS_CDB_DIRECTION_READ; 1891 cc->cdb.timeout = 0; 1892 1893 cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]); 1894 bzero(cbc, sizeof(*cbc)); 1895 cbc->opcode = dataout ? CISS_ARRAY_CONTROLLER_WRITE : CISS_ARRAY_CONTROLLER_READ; 1896 cbc->bmic_opcode = opcode; 1897 cbc->size = htons((u_int16_t)bufsize); 1898 1899 out: 1900 if (error) { 1901 if (cr != NULL) 1902 ciss_release_request(cr); 1903 if ((bufp != NULL) && (*bufp == NULL) && (buf != NULL)) 1904 free(buf, CISS_MALLOC_CLASS); 1905 } else { 1906 *crp = cr; 1907 if ((bufp != NULL) && (*bufp == NULL) && (buf != NULL)) 1908 *bufp = buf; 1909 } 1910 return(error); 1911 } 1912 1913 /************************************************************************ 1914 * Handle a command passed in from userspace. 1915 */ 1916 static int 1917 ciss_user_command(struct ciss_softc *sc, IOCTL_Command_struct *ioc) 1918 { 1919 struct ciss_request *cr; 1920 struct ciss_command *cc; 1921 struct ciss_error_info *ce; 1922 int error; 1923 1924 debug_called(1); 1925 1926 cr = NULL; 1927 1928 /* 1929 * Get a request. 1930 */ 1931 if ((error = ciss_get_request(sc, &cr)) != 0) 1932 goto out; 1933 cc = CISS_FIND_COMMAND(cr); 1934 1935 /* 1936 * Allocate an in-kernel databuffer if required, copy in user data. 1937 */ 1938 cr->cr_length = ioc->buf_size; 1939 if (ioc->buf_size > 0) { 1940 if ((cr->cr_data = malloc(ioc->buf_size, CISS_MALLOC_CLASS, M_WAITOK)) == NULL) { 1941 error = ENOMEM; 1942 goto out; 1943 } 1944 if ((error = copyin(ioc->buf, cr->cr_data, ioc->buf_size))) { 1945 debug(0, "copyin: bad data buffer %p/%d", ioc->buf, ioc->buf_size); 1946 goto out; 1947 } 1948 } 1949 1950 /* 1951 * Build the request based on the user command. 1952 */ 1953 bcopy(&ioc->LUN_info, &cc->header.address, sizeof(cc->header.address)); 1954 bcopy(&ioc->Request, &cc->cdb, sizeof(cc->cdb)); 1955 1956 /* XXX anything else to populate here? */ 1957 1958 /* 1959 * Run the command. 1960 */ 1961 if ((error = ciss_synch_request(cr, 60 * 1000))) { 1962 debug(0, "request failed - %d", error); 1963 goto out; 1964 } 1965 1966 /* 1967 * Copy the results back to the user. 1968 */ 1969 ce = (struct ciss_error_info *)&(cc->sg[0]); 1970 bcopy(ce, &ioc->error_info, sizeof(*ce)); 1971 if ((ioc->buf_size > 0) && 1972 (error = copyout(cr->cr_data, ioc->buf, ioc->buf_size))) { 1973 debug(0, "copyout: bad data buffer %p/%d", ioc->buf, ioc->buf_size); 1974 goto out; 1975 } 1976 1977 /* done OK */ 1978 error = 0; 1979 1980 out: 1981 if ((cr != NULL) && (cr->cr_data != NULL)) 1982 free(cr->cr_data, CISS_MALLOC_CLASS); 1983 if (cr != NULL) 1984 ciss_release_request(cr); 1985 return(error); 1986 } 1987 1988 /************************************************************************ 1989 * Map a request into bus-visible space, initialise the scatter/gather 1990 * list. 1991 */ 1992 static int 1993 ciss_map_request(struct ciss_request *cr) 1994 { 1995 struct ciss_softc *sc; 1996 1997 debug_called(2); 1998 1999 sc = cr->cr_sc; 2000 2001 /* check that mapping is necessary */ 2002 if ((cr->cr_flags & CISS_REQ_MAPPED) || (cr->cr_data == NULL)) 2003 return(0); 2004 2005 bus_dmamap_load(sc->ciss_buffer_dmat, cr->cr_datamap, cr->cr_data, cr->cr_length, 2006 ciss_request_map_helper, CISS_FIND_COMMAND(cr), 0); 2007 2008 if (cr->cr_flags & CISS_REQ_DATAIN) 2009 bus_dmamap_sync(sc->ciss_buffer_dmat, cr->cr_datamap, BUS_DMASYNC_PREREAD); 2010 if (cr->cr_flags & CISS_REQ_DATAOUT) 2011 bus_dmamap_sync(sc->ciss_buffer_dmat, cr->cr_datamap, BUS_DMASYNC_PREWRITE); 2012 2013 cr->cr_flags |= CISS_REQ_MAPPED; 2014 return(0); 2015 } 2016 2017 static void 2018 ciss_request_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error) 2019 { 2020 struct ciss_command *cc; 2021 int i; 2022 2023 debug_called(2); 2024 2025 cc = (struct ciss_command *)arg; 2026 for (i = 0; i < nseg; i++) { 2027 cc->sg[i].address = segs[i].ds_addr; 2028 cc->sg[i].length = segs[i].ds_len; 2029 cc->sg[i].extension = 0; 2030 } 2031 /* we leave the s/g table entirely within the command */ 2032 cc->header.sg_in_list = nseg; 2033 cc->header.sg_total = nseg; 2034 } 2035 2036 /************************************************************************ 2037 * Unmap a request from bus-visible space. 2038 */ 2039 static void 2040 ciss_unmap_request(struct ciss_request *cr) 2041 { 2042 struct ciss_softc *sc; 2043 2044 debug_called(2); 2045 2046 sc = cr->cr_sc; 2047 2048 /* check that unmapping is necessary */ 2049 if (!(cr->cr_flags & CISS_REQ_MAPPED) || (cr->cr_data == NULL)) 2050 return; 2051 2052 if (cr->cr_flags & CISS_REQ_DATAIN) 2053 bus_dmamap_sync(sc->ciss_buffer_dmat, cr->cr_datamap, BUS_DMASYNC_POSTREAD); 2054 if (cr->cr_flags & CISS_REQ_DATAOUT) 2055 bus_dmamap_sync(sc->ciss_buffer_dmat, cr->cr_datamap, BUS_DMASYNC_POSTWRITE); 2056 2057 bus_dmamap_unload(sc->ciss_buffer_dmat, cr->cr_datamap); 2058 cr->cr_flags &= ~CISS_REQ_MAPPED; 2059 } 2060 2061 /************************************************************************ 2062 * Attach the driver to CAM. 2063 * 2064 * We put all the logical drives on a single SCSI bus. 2065 */ 2066 static int 2067 ciss_cam_init(struct ciss_softc *sc) 2068 { 2069 2070 debug_called(1); 2071 2072 /* 2073 * Allocate a devq. We can reuse this for the masked physical 2074 * devices if we decide to export these as well. 2075 */ 2076 if ((sc->ciss_cam_devq = cam_simq_alloc(sc->ciss_max_requests)) == NULL) { 2077 ciss_printf(sc, "can't allocate CAM SIM queue\n"); 2078 return(ENOMEM); 2079 } 2080 2081 /* 2082 * Create a SIM. 2083 */ 2084 if ((sc->ciss_cam_sim = cam_sim_alloc(ciss_cam_action, ciss_cam_poll, "ciss", sc, 2085 device_get_unit(sc->ciss_dev), 2086 sc->ciss_max_requests - 2, 2087 1, 2088 sc->ciss_cam_devq)) == NULL) { 2089 ciss_printf(sc, "can't allocate CAM SIM\n"); 2090 return(ENOMEM); 2091 } 2092 2093 /* 2094 * Register bus 0 (the 'logical drives' bus) with this SIM. 2095 */ 2096 if (xpt_bus_register(sc->ciss_cam_sim, 0) != 0) { 2097 ciss_printf(sc, "can't register SCSI bus 0\n"); 2098 return(ENXIO); 2099 } 2100 2101 /* 2102 * Initiate a rescan of the bus. 2103 */ 2104 ciss_cam_rescan_all(sc); 2105 2106 return(0); 2107 } 2108 2109 /************************************************************************ 2110 * Initiate a rescan of the 'logical devices' SIM 2111 */ 2112 static void 2113 ciss_cam_rescan_target(struct ciss_softc *sc, int target) 2114 { 2115 union ccb *ccb; 2116 2117 debug_called(1); 2118 2119 if ((ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK | M_ZERO)) == NULL) { 2120 ciss_printf(sc, "rescan failed (can't allocate CCB)\n"); 2121 return; 2122 } 2123 2124 if (xpt_create_path(&sc->ciss_cam_path, xpt_periph, cam_sim_path(sc->ciss_cam_sim), target, 0) 2125 != CAM_REQ_CMP) { 2126 ciss_printf(sc, "rescan failed (can't create path)\n"); 2127 return; 2128 } 2129 2130 xpt_setup_ccb(&ccb->ccb_h, sc->ciss_cam_path, 5/*priority (low)*/); 2131 ccb->ccb_h.func_code = XPT_SCAN_BUS; 2132 ccb->ccb_h.cbfcnp = ciss_cam_rescan_callback; 2133 ccb->crcn.flags = CAM_FLAG_NONE; 2134 xpt_action(ccb); 2135 2136 /* scan is now in progress */ 2137 } 2138 2139 static void 2140 ciss_cam_rescan_all(struct ciss_softc *sc) 2141 { 2142 ciss_cam_rescan_target(sc, 0); 2143 } 2144 2145 static void 2146 ciss_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb) 2147 { 2148 xpt_free_path(ccb->ccb_h.path); 2149 free(ccb, M_TEMP); 2150 } 2151 2152 /************************************************************************ 2153 * Handle requests coming from CAM 2154 */ 2155 static void 2156 ciss_cam_action(struct cam_sim *sim, union ccb *ccb) 2157 { 2158 struct ciss_softc *sc; 2159 struct ccb_scsiio *csio; 2160 int target; 2161 2162 sc = cam_sim_softc(sim); 2163 csio = (struct ccb_scsiio *)&ccb->csio; 2164 target = csio->ccb_h.target_id; 2165 2166 switch (ccb->ccb_h.func_code) { 2167 2168 /* perform SCSI I/O */ 2169 case XPT_SCSI_IO: 2170 if (!ciss_cam_action_io(sim, csio)) 2171 return; 2172 break; 2173 2174 /* perform geometry calculations */ 2175 case XPT_CALC_GEOMETRY: 2176 { 2177 struct ccb_calc_geometry *ccg = &ccb->ccg; 2178 struct ciss_ldrive *ld = &sc->ciss_logical[target]; 2179 2180 debug(1, "XPT_CALC_GEOMETRY %d:%d:%d", cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 2181 2182 /* 2183 * Use the cached geometry settings unless the fault tolerance 2184 * is invalid. 2185 */ 2186 if (ld->cl_geometry.fault_tolerance == 0xFF) { 2187 u_int32_t secs_per_cylinder; 2188 2189 ccg->heads = 255; 2190 ccg->secs_per_track = 32; 2191 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 2192 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 2193 } else { 2194 ccg->heads = ld->cl_geometry.heads; 2195 ccg->secs_per_track = ld->cl_geometry.sectors; 2196 ccg->cylinders = ntohs(ld->cl_geometry.cylinders); 2197 } 2198 ccb->ccb_h.status = CAM_REQ_CMP; 2199 break; 2200 } 2201 2202 /* handle path attribute inquiry */ 2203 case XPT_PATH_INQ: 2204 { 2205 struct ccb_pathinq *cpi = &ccb->cpi; 2206 2207 debug(1, "XPT_PATH_INQ %d:%d:%d", cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 2208 2209 cpi->version_num = 1; 2210 cpi->hba_inquiry = PI_TAG_ABLE; /* XXX is this correct? */ 2211 cpi->target_sprt = 0; 2212 cpi->hba_misc = 0; 2213 cpi->max_target = CISS_MAX_LOGICAL; 2214 cpi->max_lun = 0; /* 'logical drive' channel only */ 2215 cpi->initiator_id = CISS_MAX_LOGICAL; 2216 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2217 strncpy(cpi->hba_vid, "msmith@freebsd.org", HBA_IDLEN); 2218 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2219 cpi->unit_number = cam_sim_unit(sim); 2220 cpi->bus_id = cam_sim_bus(sim); 2221 cpi->base_transfer_speed = 132 * 1024; /* XXX what to set this to? */ 2222 ccb->ccb_h.status = CAM_REQ_CMP; 2223 break; 2224 } 2225 2226 case XPT_GET_TRAN_SETTINGS: 2227 { 2228 struct ccb_trans_settings *cts = &ccb->cts; 2229 int bus, target; 2230 2231 bus = cam_sim_bus(sim); 2232 target = cts->ccb_h.target_id; 2233 2234 debug(1, "XPT_GET_TRAN_SETTINGS %d:%d", bus, target); 2235 cts->valid = 0; 2236 2237 /* disconnect always OK */ 2238 cts->flags |= CCB_TRANS_DISC_ENB; 2239 cts->valid |= CCB_TRANS_DISC_VALID; 2240 2241 cts->ccb_h.status = CAM_REQ_CMP; 2242 break; 2243 } 2244 2245 default: /* we can't do this */ 2246 debug(1, "unspported func_code = 0x%x", ccb->ccb_h.func_code); 2247 ccb->ccb_h.status = CAM_REQ_INVALID; 2248 break; 2249 } 2250 2251 xpt_done(ccb); 2252 } 2253 2254 /************************************************************************ 2255 * Handle a CAM SCSI I/O request. 2256 */ 2257 static int 2258 ciss_cam_action_io(struct cam_sim *sim, struct ccb_scsiio *csio) 2259 { 2260 struct ciss_softc *sc; 2261 int bus, target; 2262 struct ciss_request *cr; 2263 struct ciss_command *cc; 2264 int error; 2265 2266 sc = cam_sim_softc(sim); 2267 bus = cam_sim_bus(sim); 2268 target = csio->ccb_h.target_id; 2269 2270 debug(2, "XPT_SCSI_IO %d:%d:%d", bus, target, csio->ccb_h.target_lun); 2271 2272 /* check for I/O attempt to nonexistent device */ 2273 if ((bus != 0) || 2274 (target >= CISS_MAX_LOGICAL) || 2275 (sc->ciss_logical[target].cl_status == CISS_LD_NONEXISTENT)) { 2276 debug(3, " device does not exist"); 2277 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2278 } 2279 2280 /* firmware does not support commands > 10 bytes */ 2281 if (csio->cdb_len > 12/*CISS_CDB_BUFFER_SIZE*/) { 2282 debug(3, " command too large (%d > %d)", csio->cdb_len, CISS_CDB_BUFFER_SIZE); 2283 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2284 } 2285 2286 /* check that the CDB pointer is not to a physical address */ 2287 if ((csio->ccb_h.flags & CAM_CDB_POINTER) && (csio->ccb_h.flags & CAM_CDB_PHYS)) { 2288 debug(3, " CDB pointer is to physical address"); 2289 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2290 } 2291 2292 /* if there is data transfer, it must be to/from a virtual address */ 2293 if ((csio->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 2294 if (csio->ccb_h.flags & CAM_DATA_PHYS) { /* we can't map it */ 2295 debug(3, " data pointer is to physical address"); 2296 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2297 } 2298 if (csio->ccb_h.flags & CAM_SCATTER_VALID) { /* we want to do the s/g setup */ 2299 debug(3, " data has premature s/g setup"); 2300 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2301 } 2302 } 2303 2304 /* abandon aborted ccbs or those that have failed validation */ 2305 if ((csio->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 2306 debug(3, "abandoning CCB due to abort/validation failure"); 2307 return(EINVAL); 2308 } 2309 2310 /* handle emulation of some SCSI commands ourself */ 2311 if (ciss_cam_emulate(sc, csio)) 2312 return(0); 2313 2314 /* 2315 * Get a request to manage this command. If we can't, return the 2316 * ccb, freeze the queue and flag so that we unfreeze it when a 2317 * request completes. 2318 */ 2319 if ((error = ciss_get_request(sc, &cr)) != 0) { 2320 xpt_freeze_simq(sc->ciss_cam_sim, 1); 2321 csio->ccb_h.status |= CAM_REQUEUE_REQ; 2322 return(error); 2323 } 2324 2325 /* 2326 * Build the command. 2327 */ 2328 cc = CISS_FIND_COMMAND(cr); 2329 cr->cr_data = csio->data_ptr; 2330 cr->cr_length = csio->dxfer_len; 2331 cr->cr_complete = ciss_cam_complete; 2332 cr->cr_private = csio; 2333 2334 cc->header.address.logical.mode = CISS_HDR_ADDRESS_MODE_LOGICAL; 2335 cc->header.address.logical.lun = target; 2336 cc->cdb.cdb_length = csio->cdb_len; 2337 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 2338 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; /* XXX ordered tags? */ 2339 if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 2340 cr->cr_flags = CISS_REQ_DATAOUT; 2341 cc->cdb.direction = CISS_CDB_DIRECTION_WRITE; 2342 } else if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 2343 cr->cr_flags = CISS_REQ_DATAIN; 2344 cc->cdb.direction = CISS_CDB_DIRECTION_READ; 2345 } else { 2346 cr->cr_flags = 0; 2347 cc->cdb.direction = CISS_CDB_DIRECTION_NONE; 2348 } 2349 cc->cdb.timeout = (csio->ccb_h.timeout / 1000) + 1; 2350 if (csio->ccb_h.flags & CAM_CDB_POINTER) { 2351 bcopy(csio->cdb_io.cdb_ptr, &cc->cdb.cdb[0], csio->cdb_len); 2352 } else { 2353 bcopy(csio->cdb_io.cdb_bytes, &cc->cdb.cdb[0], csio->cdb_len); 2354 } 2355 2356 /* 2357 * Submit the request to the adapter. 2358 * 2359 * Note that this may fail if we're unable to map the request (and 2360 * if we ever learn a transport layer other than simple, may fail 2361 * if the adapter rejects the command). 2362 */ 2363 if ((error = ciss_start(cr)) != 0) { 2364 xpt_freeze_simq(sc->ciss_cam_sim, 1); 2365 csio->ccb_h.status |= CAM_REQUEUE_REQ; 2366 ciss_release_request(cr); 2367 return(error); 2368 } 2369 2370 return(0); 2371 } 2372 2373 /************************************************************************ 2374 * Emulate SCSI commands the adapter doesn't handle as we might like. 2375 */ 2376 static int 2377 ciss_cam_emulate(struct ciss_softc *sc, struct ccb_scsiio *csio) 2378 { 2379 int target; 2380 u_int8_t opcode; 2381 2382 2383 target = csio->ccb_h.target_id; 2384 opcode = (csio->ccb_h.flags & CAM_CDB_POINTER) ? 2385 *(u_int8_t *)csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes[0]; 2386 2387 /* 2388 * Handle requests for volumes that don't exist. A selection timeout 2389 * is slightly better than an illegal request. Other errors might be 2390 * better. 2391 */ 2392 if (sc->ciss_logical[target].cl_status == CISS_LD_NONEXISTENT) { 2393 csio->ccb_h.status = CAM_SEL_TIMEOUT; 2394 xpt_done((union ccb *)csio); 2395 return(1); 2396 } 2397 2398 /* 2399 * Handle requests for volumes that exist but are offline. 2400 * 2401 * I/O operations should fail, everything else should work. 2402 */ 2403 if (sc->ciss_logical[target].cl_status == CISS_LD_OFFLINE) { 2404 switch(opcode) { 2405 case READ_6: 2406 case READ_10: 2407 case READ_12: 2408 case WRITE_6: 2409 case WRITE_10: 2410 case WRITE_12: 2411 csio->ccb_h.status = CAM_SEL_TIMEOUT; 2412 xpt_done((union ccb *)csio); 2413 return(1); 2414 } 2415 } 2416 2417 2418 /* if we have to fake Synchronise Cache */ 2419 if (sc->ciss_flags & CISS_FLAG_FAKE_SYNCH) { 2420 2421 /* 2422 * If this is a Synchronise Cache command, typically issued when 2423 * a device is closed, flush the adapter and complete now. 2424 */ 2425 if (((csio->ccb_h.flags & CAM_CDB_POINTER) ? 2426 *(u_int8_t *)csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes[0]) == SYNCHRONIZE_CACHE) { 2427 ciss_flush_adapter(sc); 2428 csio->ccb_h.status = CAM_REQ_CMP; 2429 xpt_done((union ccb *)csio); 2430 return(1); 2431 } 2432 } 2433 2434 return(0); 2435 } 2436 2437 /************************************************************************ 2438 * Check for possibly-completed commands. 2439 */ 2440 static void 2441 ciss_cam_poll(struct cam_sim *sim) 2442 { 2443 struct ciss_softc *sc = cam_sim_softc(sim); 2444 2445 debug_called(2); 2446 2447 ciss_done(sc); 2448 } 2449 2450 /************************************************************************ 2451 * Handle completion of a command - pass results back through the CCB 2452 */ 2453 static void 2454 ciss_cam_complete(struct ciss_request *cr) 2455 { 2456 struct ciss_softc *sc; 2457 struct ciss_command *cc; 2458 struct ciss_error_info *ce; 2459 struct ccb_scsiio *csio; 2460 int scsi_status; 2461 int command_status; 2462 2463 debug_called(2); 2464 2465 sc = cr->cr_sc; 2466 cc = CISS_FIND_COMMAND(cr); 2467 ce = (struct ciss_error_info *)&(cc->sg[0]); 2468 csio = (struct ccb_scsiio *)cr->cr_private; 2469 2470 /* 2471 * Extract status values from request. 2472 */ 2473 ciss_report_request(cr, &command_status, &scsi_status); 2474 csio->scsi_status = scsi_status; 2475 2476 /* 2477 * Handle specific SCSI status values. 2478 */ 2479 switch(scsi_status) { 2480 /* no status due to adapter error */ 2481 case -1: 2482 debug(0, "adapter error"); 2483 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2484 break; 2485 2486 /* no status due to command completed OK */ 2487 case SCSI_STATUS_OK: /* CISS_SCSI_STATUS_GOOD */ 2488 debug(2, "SCSI_STATUS_OK"); 2489 csio->ccb_h.status = CAM_REQ_CMP; 2490 break; 2491 2492 /* check condition, sense data included */ 2493 case SCSI_STATUS_CHECK_COND: /* CISS_SCSI_STATUS_CHECK_CONDITION */ 2494 debug(0, "SCSI_STATUS_CHECK_COND sense size %d resid %d", 2495 ce->sense_length, ce->residual_count); 2496 bzero(&csio->sense_data, SSD_FULL_SIZE); 2497 bcopy(&ce->sense_info[0], &csio->sense_data, ce->sense_length); 2498 csio->sense_len = ce->sense_length; 2499 csio->resid = ce->residual_count; 2500 csio->ccb_h.status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 2501 #ifdef CISS_DEBUG 2502 { 2503 struct scsi_sense_data *sns = (struct scsi_sense_data *)&ce->sense_info[0]; 2504 debug(0, "sense key %x", sns->flags & SSD_KEY); 2505 } 2506 #endif 2507 break; 2508 2509 case SCSI_STATUS_BUSY: /* CISS_SCSI_STATUS_BUSY */ 2510 debug(0, "SCSI_STATUS_BUSY"); 2511 csio->ccb_h.status = CAM_SCSI_BUSY; 2512 break; 2513 2514 default: 2515 debug(0, "unknown status 0x%x", csio->scsi_status); 2516 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2517 break; 2518 } 2519 2520 /* handle post-command fixup */ 2521 ciss_cam_complete_fixup(sc, csio); 2522 2523 /* tell CAM we're ready for more commands */ 2524 csio->ccb_h.status |= CAM_RELEASE_SIMQ; 2525 2526 xpt_done((union ccb *)csio); 2527 ciss_release_request(cr); 2528 } 2529 2530 /******************************************************************************** 2531 * Fix up the result of some commands here. 2532 */ 2533 static void 2534 ciss_cam_complete_fixup(struct ciss_softc *sc, struct ccb_scsiio *csio) 2535 { 2536 struct scsi_inquiry_data *inq; 2537 struct ciss_ldrive *cl; 2538 int target; 2539 2540 if (((csio->ccb_h.flags & CAM_CDB_POINTER) ? 2541 *(u_int8_t *)csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes[0]) == INQUIRY) { 2542 2543 inq = (struct scsi_inquiry_data *)csio->data_ptr; 2544 target = csio->ccb_h.target_id; 2545 cl = &sc->ciss_logical[target]; 2546 2547 padstr(inq->vendor, "COMPAQ", 8); 2548 padstr(inq->product, ciss_name_ldrive_org(cl->cl_ldrive->fault_tolerance), 8); 2549 padstr(inq->revision, ciss_name_ldrive_status(cl->cl_lstatus->status), 16); 2550 } 2551 } 2552 2553 2554 /******************************************************************************** 2555 * Find a peripheral attached at (target) 2556 */ 2557 static struct cam_periph * 2558 ciss_find_periph(struct ciss_softc *sc, int target) 2559 { 2560 struct cam_periph *periph; 2561 struct cam_path *path; 2562 int status; 2563 2564 status = xpt_create_path(&path, NULL, cam_sim_path(sc->ciss_cam_sim), target, 0); 2565 if (status == CAM_REQ_CMP) { 2566 periph = cam_periph_find(path, NULL); 2567 xpt_free_path(path); 2568 } else { 2569 periph = NULL; 2570 } 2571 return(periph); 2572 } 2573 2574 /******************************************************************************** 2575 * Name the device at (target) 2576 * 2577 * XXX is this strictly correct? 2578 */ 2579 static int 2580 ciss_name_device(struct ciss_softc *sc, int target) 2581 { 2582 struct cam_periph *periph; 2583 2584 if ((periph = ciss_find_periph(sc, target)) != NULL) { 2585 sprintf(sc->ciss_logical[target].cl_name, "%s%d", periph->periph_name, periph->unit_number); 2586 return(0); 2587 } 2588 sc->ciss_logical[target].cl_name[0] = 0; 2589 return(ENOENT); 2590 } 2591 2592 /************************************************************************ 2593 * Periodic status monitoring. 2594 */ 2595 static void 2596 ciss_periodic(void *arg) 2597 { 2598 struct ciss_softc *sc; 2599 2600 debug_called(1); 2601 2602 sc = (struct ciss_softc *)arg; 2603 2604 /* 2605 * Check the adapter heartbeat. 2606 */ 2607 if (sc->ciss_cfg->heartbeat == sc->ciss_heartbeat) { 2608 sc->ciss_heart_attack++; 2609 debug(0, "adapter heart attack in progress 0x%x/%d", 2610 sc->ciss_heartbeat, sc->ciss_heart_attack); 2611 if (sc->ciss_heart_attack == 3) { 2612 ciss_printf(sc, "ADAPTER HEARTBEAT FAILED\n"); 2613 /* XXX should reset adapter here */ 2614 } 2615 } else { 2616 sc->ciss_heartbeat = sc->ciss_cfg->heartbeat; 2617 sc->ciss_heart_attack = 0; 2618 debug(3, "new heartbeat 0x%x", sc->ciss_heartbeat); 2619 } 2620 2621 /* 2622 * If the notify event request has died for some reason, or has 2623 * not started yet, restart it. 2624 */ 2625 if (!(sc->ciss_flags & CISS_FLAG_NOTIFY_OK)) { 2626 debug(0, "(re)starting Event Notify chain"); 2627 ciss_notify_event(sc); 2628 } 2629 2630 /* 2631 * Reschedule. 2632 */ 2633 if (!(sc->ciss_flags & CISS_FLAG_ABORTING)) 2634 sc->ciss_periodic = timeout(ciss_periodic, sc, CISS_HEARTBEAT_RATE * hz); 2635 } 2636 2637 /************************************************************************ 2638 * Request a notification response from the adapter. 2639 * 2640 * If (cr) is NULL, this is the first request of the adapter, so 2641 * reset the adapter's message pointer and start with the oldest 2642 * message available. 2643 */ 2644 static void 2645 ciss_notify_event(struct ciss_softc *sc) 2646 { 2647 struct ciss_request *cr; 2648 struct ciss_command *cc; 2649 struct ciss_notify_cdb *cnc; 2650 int error; 2651 2652 debug_called(1); 2653 2654 cr = sc->ciss_periodic_notify; 2655 2656 /* get a request if we don't already have one */ 2657 if (cr == NULL) { 2658 if ((error = ciss_get_request(sc, &cr)) != 0) { 2659 debug(0, "can't get notify event request"); 2660 goto out; 2661 } 2662 sc->ciss_periodic_notify = cr; 2663 cr->cr_complete = ciss_notify_complete; 2664 debug(1, "acquired request %d", cr->cr_tag); 2665 } 2666 2667 /* 2668 * Get a databuffer if we don't already have one, note that the 2669 * adapter command wants a larger buffer than the actual 2670 * structure. 2671 */ 2672 if (cr->cr_data == NULL) { 2673 if ((cr->cr_data = malloc(CISS_NOTIFY_DATA_SIZE, CISS_MALLOC_CLASS, M_NOWAIT)) == NULL) { 2674 debug(0, "can't get notify event request buffer"); 2675 error = ENOMEM; 2676 goto out; 2677 } 2678 cr->cr_length = CISS_NOTIFY_DATA_SIZE; 2679 } 2680 2681 /* re-setup the request's command (since we never release it) XXX overkill*/ 2682 ciss_preen_command(cr); 2683 2684 /* (re)build the notify event command */ 2685 cc = CISS_FIND_COMMAND(cr); 2686 cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL; 2687 cc->header.address.physical.bus = 0; 2688 cc->header.address.physical.target = 0; 2689 2690 cc->cdb.cdb_length = sizeof(*cnc); 2691 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 2692 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 2693 cc->cdb.direction = CISS_CDB_DIRECTION_READ; 2694 cc->cdb.timeout = 0; /* no timeout, we hope */ 2695 2696 cnc = (struct ciss_notify_cdb *)&(cc->cdb.cdb[0]); 2697 bzero(cr->cr_data, CISS_NOTIFY_DATA_SIZE); 2698 cnc->opcode = CISS_OPCODE_READ; 2699 cnc->command = CISS_COMMAND_NOTIFY_ON_EVENT; 2700 cnc->timeout = 0; /* no timeout, we hope */ 2701 cnc->synchronous = 0; 2702 cnc->ordered = 0; 2703 cnc->seek_to_oldest = 0; 2704 cnc->new_only = 0; 2705 cnc->length = htonl(CISS_NOTIFY_DATA_SIZE); 2706 2707 /* submit the request */ 2708 error = ciss_start(cr); 2709 2710 out: 2711 if (error) { 2712 if (cr != NULL) { 2713 if (cr->cr_data != NULL) 2714 free(cr->cr_data, CISS_MALLOC_CLASS); 2715 ciss_release_request(cr); 2716 } 2717 sc->ciss_periodic_notify = NULL; 2718 debug(0, "can't submit notify event request"); 2719 sc->ciss_flags &= ~CISS_FLAG_NOTIFY_OK; 2720 } else { 2721 debug(1, "notify event submitted"); 2722 sc->ciss_flags |= CISS_FLAG_NOTIFY_OK; 2723 } 2724 } 2725 2726 static void 2727 ciss_notify_complete(struct ciss_request *cr) 2728 { 2729 struct ciss_command *cc; 2730 struct ciss_notify *cn; 2731 struct ciss_softc *sc; 2732 int scsi_status; 2733 int command_status; 2734 2735 debug_called(1); 2736 2737 cc = CISS_FIND_COMMAND(cr); 2738 cn = (struct ciss_notify *)cr->cr_data; 2739 sc = cr->cr_sc; 2740 2741 /* 2742 * Report request results, decode status. 2743 */ 2744 ciss_report_request(cr, &command_status, &scsi_status); 2745 2746 /* 2747 * Abort the chain on a fatal error. 2748 * 2749 * XXX which of these are actually errors? 2750 */ 2751 if ((command_status != CISS_CMD_STATUS_SUCCESS) && 2752 (command_status != CISS_CMD_STATUS_TARGET_STATUS) && 2753 (command_status != CISS_CMD_STATUS_TIMEOUT)) { /* XXX timeout? */ 2754 ciss_printf(sc, "fatal error in Notify Event request (%s)\n", 2755 ciss_name_command_status(command_status)); 2756 ciss_release_request(cr); 2757 sc->ciss_flags &= ~CISS_FLAG_NOTIFY_OK; 2758 return; 2759 } 2760 2761 /* 2762 * If the adapter gave us a text message, print it. 2763 */ 2764 if (cn->message[0] != 0) 2765 ciss_printf(sc, "*** %.80s\n", cn->message); 2766 2767 debug(0, "notify event class %d subclass %d detail %d", 2768 cn->class, cn->subclass, cn->detail); 2769 2770 /* 2771 * If there's room, save the event for a user-level tool. 2772 */ 2773 if (((sc->ciss_notify_head + 1) % CISS_MAX_EVENTS) != sc->ciss_notify_tail) { 2774 sc->ciss_notify[sc->ciss_notify_head] = *cn; 2775 sc->ciss_notify_head = (sc->ciss_notify_head + 1) % CISS_MAX_EVENTS; 2776 } 2777 2778 /* 2779 * Some events are directly of interest to us. 2780 */ 2781 switch (cn->class) { 2782 case CISS_NOTIFY_LOGICAL: 2783 ciss_notify_logical(sc, cn); 2784 break; 2785 case CISS_NOTIFY_PHYSICAL: 2786 ciss_notify_physical(sc, cn); 2787 break; 2788 } 2789 2790 /* 2791 * If the response indicates that the notifier has been aborted, 2792 * release the notifier command. 2793 */ 2794 if ((cn->class == CISS_NOTIFY_NOTIFIER) && 2795 (cn->subclass == CISS_NOTIFY_NOTIFIER_STATUS) && 2796 (cn->detail == 1)) { 2797 debug(0, "notifier exiting"); 2798 sc->ciss_flags &= ~CISS_FLAG_NOTIFY_OK; 2799 ciss_release_request(cr); 2800 sc->ciss_periodic_notify = NULL; 2801 wakeup(&sc->ciss_periodic_notify); 2802 } 2803 2804 /* 2805 * Send a new notify event command, if we're not aborting. 2806 */ 2807 if (!(sc->ciss_flags & CISS_FLAG_ABORTING)) { 2808 ciss_notify_event(sc); 2809 } 2810 } 2811 2812 /************************************************************************ 2813 * Abort the Notify Event chain. 2814 * 2815 * Note that we can't just abort the command in progress; we have to 2816 * explicitly issue an Abort Notify Event command in order for the 2817 * adapter to clean up correctly. 2818 * 2819 * If we are called with CISS_FLAG_ABORTING set in the adapter softc, 2820 * the chain will not restart itself. 2821 */ 2822 static int 2823 ciss_notify_abort(struct ciss_softc *sc) 2824 { 2825 struct ciss_request *cr; 2826 struct ciss_command *cc; 2827 struct ciss_notify_cdb *cnc; 2828 int error, s, command_status, scsi_status; 2829 2830 debug_called(1); 2831 2832 cr = NULL; 2833 error = 0; 2834 2835 /* verify that there's an outstanding command */ 2836 if (!(sc->ciss_flags & CISS_FLAG_NOTIFY_OK)) 2837 goto out; 2838 2839 /* get a command to issue the abort with */ 2840 if ((error = ciss_get_request(sc, &cr))) 2841 goto out; 2842 2843 /* get a buffer for the result */ 2844 if ((cr->cr_data = malloc(CISS_NOTIFY_DATA_SIZE, CISS_MALLOC_CLASS, M_NOWAIT)) == NULL) { 2845 debug(0, "can't get notify event request buffer"); 2846 error = ENOMEM; 2847 goto out; 2848 } 2849 cr->cr_length = CISS_NOTIFY_DATA_SIZE; 2850 2851 /* build the CDB */ 2852 cc = CISS_FIND_COMMAND(cr); 2853 cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL; 2854 cc->header.address.physical.bus = 0; 2855 cc->header.address.physical.target = 0; 2856 cc->cdb.cdb_length = sizeof(*cnc); 2857 cc->cdb.type = CISS_CDB_TYPE_COMMAND; 2858 cc->cdb.attribute = CISS_CDB_ATTRIBUTE_SIMPLE; 2859 cc->cdb.direction = CISS_CDB_DIRECTION_READ; 2860 cc->cdb.timeout = 0; /* no timeout, we hope */ 2861 2862 cnc = (struct ciss_notify_cdb *)&(cc->cdb.cdb[0]); 2863 bzero(cnc, sizeof(*cnc)); 2864 cnc->opcode = CISS_OPCODE_WRITE; 2865 cnc->command = CISS_COMMAND_ABORT_NOTIFY; 2866 cnc->length = htonl(CISS_NOTIFY_DATA_SIZE); 2867 2868 ciss_print_request(cr); 2869 2870 /* 2871 * Submit the request and wait for it to complete. 2872 */ 2873 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 2874 ciss_printf(sc, "Abort Notify Event command failed (%d)\n", error); 2875 goto out; 2876 } 2877 2878 /* 2879 * Check response. 2880 */ 2881 ciss_report_request(cr, &command_status, &scsi_status); 2882 switch(command_status) { 2883 case CISS_CMD_STATUS_SUCCESS: 2884 break; 2885 case CISS_CMD_STATUS_INVALID_COMMAND: 2886 /* 2887 * Some older adapters don't support the CISS version of this 2888 * command. Fall back to using the BMIC version. 2889 */ 2890 error = ciss_notify_abort_bmic(sc); 2891 if (error != 0) 2892 goto out; 2893 break; 2894 2895 case CISS_CMD_STATUS_TARGET_STATUS: 2896 /* 2897 * This can happen if the adapter thinks there wasn't an outstanding 2898 * Notify Event command but we did. We clean up here. 2899 */ 2900 if (scsi_status == CISS_SCSI_STATUS_CHECK_CONDITION) { 2901 if (sc->ciss_periodic_notify != NULL) 2902 ciss_release_request(sc->ciss_periodic_notify); 2903 error = 0; 2904 goto out; 2905 } 2906 /* FALLTHROUGH */ 2907 2908 default: 2909 ciss_printf(sc, "Abort Notify Event command failed (%s)\n", 2910 ciss_name_command_status(command_status)); 2911 error = EIO; 2912 goto out; 2913 } 2914 2915 /* 2916 * Sleep waiting for the notifier command to complete. Note 2917 * that if it doesn't, we may end up in a bad situation, since 2918 * the adapter may deliver it later. Also note that the adapter 2919 * requires the Notify Event command to be cancelled in order to 2920 * maintain internal bookkeeping. 2921 */ 2922 s = splcam(); 2923 while (sc->ciss_periodic_notify != NULL) { 2924 error = tsleep(&sc->ciss_periodic_notify, 0, "cissNEA", hz * 5); 2925 if (error == EWOULDBLOCK) { 2926 ciss_printf(sc, "Notify Event command failed to abort, adapter may wedge.\n"); 2927 break; 2928 } 2929 } 2930 splx(s); 2931 2932 out: 2933 /* release the cancel request */ 2934 if (cr != NULL) { 2935 if (cr->cr_data != NULL) 2936 free(cr->cr_data, CISS_MALLOC_CLASS); 2937 ciss_release_request(cr); 2938 } 2939 if (error == 0) 2940 sc->ciss_flags &= ~CISS_FLAG_NOTIFY_OK; 2941 return(error); 2942 } 2943 2944 /************************************************************************ 2945 * Abort the Notify Event chain using a BMIC command. 2946 */ 2947 static int 2948 ciss_notify_abort_bmic(struct ciss_softc *sc) 2949 { 2950 struct ciss_request *cr; 2951 int error, command_status; 2952 2953 debug_called(1); 2954 2955 cr = NULL; 2956 error = 0; 2957 2958 /* verify that there's an outstanding command */ 2959 if (!(sc->ciss_flags & CISS_FLAG_NOTIFY_OK)) 2960 goto out; 2961 2962 /* 2963 * Build a BMIC command to cancel the Notify on Event command. 2964 * 2965 * Note that we are sending a CISS opcode here. Odd. 2966 */ 2967 if ((error = ciss_get_bmic_request(sc, &cr, CISS_COMMAND_ABORT_NOTIFY, 2968 NULL, 0)) != 0) 2969 goto out; 2970 2971 /* 2972 * Submit the request and wait for it to complete. 2973 */ 2974 if ((error = ciss_synch_request(cr, 60 * 1000)) != 0) { 2975 ciss_printf(sc, "error sending BMIC Cancel Notify on Event command (%d)\n", error); 2976 goto out; 2977 } 2978 2979 /* 2980 * Check response. 2981 */ 2982 ciss_report_request(cr, &command_status, NULL); 2983 switch(command_status) { 2984 case CISS_CMD_STATUS_SUCCESS: 2985 break; 2986 default: 2987 ciss_printf(sc, "error cancelling Notify on Event (%s)\n", 2988 ciss_name_command_status(command_status)); 2989 error = EIO; 2990 goto out; 2991 } 2992 2993 out: 2994 if (cr != NULL) 2995 ciss_release_request(cr); 2996 return(error); 2997 } 2998 2999 /************************************************************************ 3000 * Handle a notify event relating to the status of a logical drive. 3001 * 3002 * XXX need to be able to defer some of these to properly handle 3003 * calling the "ID Physical drive" command, unless the 'extended' 3004 * drive IDs are always in BIG_MAP format. 3005 */ 3006 static void 3007 ciss_notify_logical(struct ciss_softc *sc, struct ciss_notify *cn) 3008 { 3009 struct ciss_ldrive *ld; 3010 int ostatus; 3011 3012 debug_called(2); 3013 3014 ld = &sc->ciss_logical[cn->data.logical_status.logical_drive]; 3015 3016 switch (cn->subclass) { 3017 case CISS_NOTIFY_LOGICAL_STATUS: 3018 switch (cn->detail) { 3019 case 0: 3020 ciss_name_device(sc, cn->data.logical_status.logical_drive); 3021 ciss_printf(sc, "logical drive %d (%s) changed status %s->%s, spare status 0x%b\n", 3022 cn->data.logical_status.logical_drive, ld->cl_name, 3023 ciss_name_ldrive_status(cn->data.logical_status.previous_state), 3024 ciss_name_ldrive_status(cn->data.logical_status.new_state), 3025 cn->data.logical_status.spare_state, 3026 "\20\1configured\2rebuilding\3failed\4in use\5available\n"); 3027 3028 /* 3029 * Update our idea of the drive's status. 3030 */ 3031 ostatus = ciss_decode_ldrive_status(cn->data.logical_status.previous_state); 3032 ld->cl_status = ciss_decode_ldrive_status(cn->data.logical_status.new_state); 3033 if (ld->cl_lstatus != NULL) 3034 ld->cl_lstatus->status = cn->data.logical_status.new_state; 3035 3036 #if 0 3037 /* 3038 * Have CAM rescan the drive if its status has changed. 3039 */ 3040 if (ostatus != ld->cl_status) 3041 ciss_cam_rescan_target(sc, cn->data.logical_status.logical_drive); 3042 #endif 3043 3044 break; 3045 3046 case 1: /* logical drive has recognised new media, needs Accept Media Exchange */ 3047 ciss_name_device(sc, cn->data.logical_status.logical_drive); 3048 ciss_printf(sc, "logical drive %d (%s) media exchanged, ready to go online\n", 3049 cn->data.logical_status.logical_drive, ld->cl_name); 3050 ciss_accept_media(sc, cn->data.logical_status.logical_drive, 1); 3051 break; 3052 3053 case 2: 3054 case 3: 3055 ciss_printf(sc, "rebuild of logical drive %d (%s) failed due to %s error\n", 3056 cn->data.rebuild_aborted.logical_drive, 3057 sc->ciss_logical[cn->data.rebuild_aborted.logical_drive].cl_name, 3058 (cn->detail == 2) ? "read" : "write"); 3059 break; 3060 } 3061 break; 3062 3063 case CISS_NOTIFY_LOGICAL_ERROR: 3064 if (cn->detail == 0) { 3065 ciss_printf(sc, "FATAL I/O ERROR on logical drive %d (%s), SCSI port %d ID %d\n", 3066 cn->data.io_error.logical_drive, 3067 sc->ciss_logical[cn->data.io_error.logical_drive].cl_name, 3068 cn->data.io_error.failure_bus, 3069 cn->data.io_error.failure_drive); 3070 /* XXX should we take the drive down at this point, or will we be told? */ 3071 } 3072 break; 3073 3074 case CISS_NOTIFY_LOGICAL_SURFACE: 3075 if (cn->detail == 0) 3076 ciss_printf(sc, "logical drive %d (%s) completed consistency initialisation\n", 3077 cn->data.consistency_completed.logical_drive, 3078 sc->ciss_logical[cn->data.consistency_completed.logical_drive].cl_name); 3079 break; 3080 } 3081 } 3082 3083 /************************************************************************ 3084 * Handle a notify event relating to the status of a physical drive. 3085 */ 3086 static void 3087 ciss_notify_physical(struct ciss_softc *sc, struct ciss_notify *cn) 3088 { 3089 3090 } 3091 3092 /************************************************************************ 3093 * Print a request. 3094 */ 3095 static void 3096 ciss_print_request(struct ciss_request *cr) 3097 { 3098 struct ciss_softc *sc; 3099 struct ciss_command *cc; 3100 int i; 3101 3102 sc = cr->cr_sc; 3103 cc = CISS_FIND_COMMAND(cr); 3104 3105 ciss_printf(sc, "REQUEST @ %p\n", cr); 3106 ciss_printf(sc, " data %p/%d tag %d flags %b\n", 3107 cr->cr_data, cr->cr_length, cr->cr_tag, cr->cr_flags, 3108 "\20\1mapped\2sleep\3poll\4dataout\5datain\n"); 3109 ciss_printf(sc, " sg list/total %d/%d host tag 0x%x\n", 3110 cc->header.sg_in_list, cc->header.sg_total, cc->header.host_tag); 3111 switch(cc->header.address.mode.mode) { 3112 case CISS_HDR_ADDRESS_MODE_PERIPHERAL: 3113 case CISS_HDR_ADDRESS_MODE_MASK_PERIPHERAL: 3114 ciss_printf(sc, " physical bus %d target %d\n", 3115 cc->header.address.physical.bus, cc->header.address.physical.target); 3116 break; 3117 case CISS_HDR_ADDRESS_MODE_LOGICAL: 3118 ciss_printf(sc, " logical unit %d\n", cc->header.address.logical.lun); 3119 break; 3120 } 3121 ciss_printf(sc, " %s cdb length %d type %s attribute %s\n", 3122 (cc->cdb.direction == CISS_CDB_DIRECTION_NONE) ? "no-I/O" : 3123 (cc->cdb.direction == CISS_CDB_DIRECTION_READ) ? "READ" : 3124 (cc->cdb.direction == CISS_CDB_DIRECTION_WRITE) ? "WRITE" : "??", 3125 cc->cdb.cdb_length, 3126 (cc->cdb.type == CISS_CDB_TYPE_COMMAND) ? "command" : 3127 (cc->cdb.type == CISS_CDB_TYPE_MESSAGE) ? "message" : "??", 3128 (cc->cdb.attribute == CISS_CDB_ATTRIBUTE_UNTAGGED) ? "untagged" : 3129 (cc->cdb.attribute == CISS_CDB_ATTRIBUTE_SIMPLE) ? "simple" : 3130 (cc->cdb.attribute == CISS_CDB_ATTRIBUTE_HEAD_OF_QUEUE) ? "head-of-queue" : 3131 (cc->cdb.attribute == CISS_CDB_ATTRIBUTE_ORDERED) ? "ordered" : 3132 (cc->cdb.attribute == CISS_CDB_ATTRIBUTE_AUTO_CONTINGENT) ? "auto-contingent" : "??"); 3133 ciss_printf(sc, " %*D\n", cc->cdb.cdb_length, &cc->cdb.cdb[0], " "); 3134 3135 if (cc->header.host_tag & CISS_HDR_HOST_TAG_ERROR) { 3136 /* XXX print error info */ 3137 } else { 3138 /* since we don't use chained s/g, don't support it here */ 3139 for (i = 0; i < cc->header.sg_in_list; i++) { 3140 if ((i % 4) == 0) 3141 ciss_printf(sc, " "); 3142 printf("0x%08x/%d ", (u_int32_t)cc->sg[i].address, cc->sg[i].length); 3143 if ((((i + 1) % 4) == 0) || (i == (cc->header.sg_in_list - 1))) 3144 printf("\n"); 3145 } 3146 } 3147 } 3148 3149 /************************************************************************ 3150 * Print information about the status of a logical drive. 3151 */ 3152 static void 3153 ciss_print_ldrive(struct ciss_softc *sc, struct ciss_ldrive *ld) 3154 { 3155 int bus, target, i; 3156 3157 if (ld->cl_lstatus == NULL) { 3158 printf("does not exist\n"); 3159 return; 3160 } 3161 3162 /* print drive status */ 3163 switch(ld->cl_lstatus->status) { 3164 case CISS_LSTATUS_OK: 3165 printf("online\n"); 3166 break; 3167 case CISS_LSTATUS_INTERIM_RECOVERY: 3168 printf("in interim recovery mode\n"); 3169 break; 3170 case CISS_LSTATUS_READY_RECOVERY: 3171 printf("ready to begin recovery\n"); 3172 break; 3173 case CISS_LSTATUS_RECOVERING: 3174 bus = CISS_BIG_MAP_BUS(sc, ld->cl_lstatus->drive_rebuilding); 3175 target = CISS_BIG_MAP_BUS(sc, ld->cl_lstatus->drive_rebuilding); 3176 printf("being recovered, working on physical drive %d.%d, %u blocks remaining\n", 3177 bus, target, ld->cl_lstatus->blocks_to_recover); 3178 break; 3179 case CISS_LSTATUS_EXPANDING: 3180 printf("being expanded, %u blocks remaining\n", 3181 ld->cl_lstatus->blocks_to_recover); 3182 break; 3183 case CISS_LSTATUS_QUEUED_FOR_EXPANSION: 3184 printf("queued for expansion\n"); 3185 break; 3186 case CISS_LSTATUS_FAILED: 3187 printf("queued for expansion\n"); 3188 break; 3189 case CISS_LSTATUS_WRONG_PDRIVE: 3190 printf("wrong physical drive inserted\n"); 3191 break; 3192 case CISS_LSTATUS_MISSING_PDRIVE: 3193 printf("missing a needed physical drive\n"); 3194 break; 3195 case CISS_LSTATUS_BECOMING_READY: 3196 printf("becoming ready\n"); 3197 break; 3198 } 3199 3200 /* print failed physical drives */ 3201 for (i = 0; i < CISS_BIG_MAP_ENTRIES / 8; i++) { 3202 bus = CISS_BIG_MAP_BUS(sc, ld->cl_lstatus->drive_failure_map[i]); 3203 target = CISS_BIG_MAP_TARGET(sc, ld->cl_lstatus->drive_failure_map[i]); 3204 if (bus == -1) 3205 continue; 3206 ciss_printf(sc, "physical drive %d:%d (%x) failed\n", bus, target, 3207 ld->cl_lstatus->drive_failure_map[i]); 3208 } 3209 } 3210 3211 #ifdef CISS_DEBUG 3212 /************************************************************************ 3213 * Print information about the controller/driver. 3214 */ 3215 static void 3216 ciss_print_adapter(struct ciss_softc *sc) 3217 { 3218 int i; 3219 3220 ciss_printf(sc, "ADAPTER:\n"); 3221 for (i = 0; i < CISSQ_COUNT; i++) { 3222 ciss_printf(sc, "%s %d/%d\n", 3223 i == 0 ? "free" : 3224 i == 1 ? "busy" : "complete", 3225 sc->ciss_qstat[i].q_length, 3226 sc->ciss_qstat[i].q_max); 3227 } 3228 ciss_printf(sc, "max_requests %d\n", sc->ciss_max_requests); 3229 ciss_printf(sc, "notify_head/tail %d/%d\n", 3230 sc->ciss_notify_head, sc->ciss_notify_tail); 3231 ciss_printf(sc, "flags %b\n", sc->ciss_flags, 3232 "\20\1notify_ok\2control_open\3aborting\4running\21fake_synch\22bmic_abort\n"); 3233 3234 for (i = 0; i < CISS_MAX_LOGICAL; i++) { 3235 ciss_printf(sc, "LOGICAL DRIVE %d: ", i); 3236 ciss_print_ldrive(sc, sc->ciss_logical + i); 3237 } 3238 3239 for (i = 1; i < sc->ciss_max_requests; i++) 3240 ciss_print_request(sc->ciss_request + i); 3241 3242 } 3243 3244 /* DDB hook */ 3245 static void 3246 ciss_print0(void) 3247 { 3248 struct ciss_softc *sc; 3249 3250 sc = devclass_get_softc(devclass_find("ciss"), 0); 3251 if (sc == NULL) { 3252 printf("no ciss controllers\n"); 3253 } else { 3254 ciss_print_adapter(sc); 3255 } 3256 } 3257 #endif 3258 3259 /************************************************************************ 3260 * Return a name for a logical drive status value. 3261 */ 3262 static const char * 3263 ciss_name_ldrive_status(int status) 3264 { 3265 switch (status) { 3266 case CISS_LSTATUS_OK: 3267 return("OK"); 3268 case CISS_LSTATUS_FAILED: 3269 return("failed"); 3270 case CISS_LSTATUS_NOT_CONFIGURED: 3271 return("not configured"); 3272 case CISS_LSTATUS_INTERIM_RECOVERY: 3273 return("interim recovery"); 3274 case CISS_LSTATUS_READY_RECOVERY: 3275 return("ready for recovery"); 3276 case CISS_LSTATUS_RECOVERING: 3277 return("recovering"); 3278 case CISS_LSTATUS_WRONG_PDRIVE: 3279 return("wrong physical drive inserted"); 3280 case CISS_LSTATUS_MISSING_PDRIVE: 3281 return("missing physical drive"); 3282 case CISS_LSTATUS_EXPANDING: 3283 return("expanding"); 3284 case CISS_LSTATUS_BECOMING_READY: 3285 return("becoming ready"); 3286 case CISS_LSTATUS_QUEUED_FOR_EXPANSION: 3287 return("queued for expansion"); 3288 } 3289 return("unknown status"); 3290 } 3291 3292 /************************************************************************ 3293 * Return an online/offline/nonexistent value for a logical drive 3294 * status value. 3295 */ 3296 static int 3297 ciss_decode_ldrive_status(int status) 3298 { 3299 switch(status) { 3300 case CISS_LSTATUS_NOT_CONFIGURED: 3301 return(CISS_LD_NONEXISTENT); 3302 3303 case CISS_LSTATUS_OK: 3304 case CISS_LSTATUS_INTERIM_RECOVERY: 3305 case CISS_LSTATUS_READY_RECOVERY: 3306 case CISS_LSTATUS_RECOVERING: 3307 case CISS_LSTATUS_EXPANDING: 3308 case CISS_LSTATUS_QUEUED_FOR_EXPANSION: 3309 return(CISS_LD_ONLINE); 3310 3311 case CISS_LSTATUS_FAILED: 3312 case CISS_LSTATUS_WRONG_PDRIVE: 3313 case CISS_LSTATUS_MISSING_PDRIVE: 3314 case CISS_LSTATUS_BECOMING_READY: 3315 default: 3316 return(CISS_LD_OFFLINE); 3317 } 3318 } 3319 3320 3321 /************************************************************************ 3322 * Return a name for a logical drive's organisation. 3323 */ 3324 static const char * 3325 ciss_name_ldrive_org(int org) 3326 { 3327 switch(org) { 3328 case CISS_LDRIVE_RAID0: 3329 return("RAID 0"); 3330 case CISS_LDRIVE_RAID1: 3331 return("RAID 1"); 3332 case CISS_LDRIVE_RAID4: 3333 return("RAID 4"); 3334 case CISS_LDRIVE_RAID5: 3335 return("RAID 5"); 3336 } 3337 return("unkown"); 3338 } 3339 3340 /************************************************************************ 3341 * Return a name for a command status value. 3342 */ 3343 static const char * 3344 ciss_name_command_status(int status) 3345 { 3346 switch(status) { 3347 case CISS_CMD_STATUS_SUCCESS: 3348 return("success"); 3349 case CISS_CMD_STATUS_TARGET_STATUS: 3350 return("target status"); 3351 case CISS_CMD_STATUS_DATA_UNDERRUN: 3352 return("data underrun"); 3353 case CISS_CMD_STATUS_DATA_OVERRUN: 3354 return("data overrun"); 3355 case CISS_CMD_STATUS_INVALID_COMMAND: 3356 return("invalid command"); 3357 case CISS_CMD_STATUS_PROTOCOL_ERROR: 3358 return("protocol error"); 3359 case CISS_CMD_STATUS_HARDWARE_ERROR: 3360 return("hardware error"); 3361 case CISS_CMD_STATUS_CONNECTION_LOST: 3362 return("connection lost"); 3363 case CISS_CMD_STATUS_ABORTED: 3364 return("aborted"); 3365 case CISS_CMD_STATUS_ABORT_FAILED: 3366 return("abort failed"); 3367 case CISS_CMD_STATUS_UNSOLICITED_ABORT: 3368 return("unsolicited abort"); 3369 case CISS_CMD_STATUS_TIMEOUT: 3370 return("timeout"); 3371 case CISS_CMD_STATUS_UNABORTABLE: 3372 return("unabortable"); 3373 } 3374 return("unknown status"); 3375 } 3376 3377 /************************************************************************ 3378 * Handle an open on the control device. 3379 */ 3380 static int 3381 ciss_open(dev_t dev, int flags, int fmt, d_thread_t *p) 3382 { 3383 struct ciss_softc *sc; 3384 3385 debug_called(1); 3386 3387 sc = (struct ciss_softc *)dev->si_drv1; 3388 3389 /* we might want to veto if someone already has us open */ 3390 3391 sc->ciss_flags |= CISS_FLAG_CONTROL_OPEN; 3392 return(0); 3393 } 3394 3395 /************************************************************************ 3396 * Handle the last close on the control device. 3397 */ 3398 static int 3399 ciss_close(dev_t dev, int flags, int fmt, d_thread_t *p) 3400 { 3401 struct ciss_softc *sc; 3402 3403 debug_called(1); 3404 3405 sc = (struct ciss_softc *)dev->si_drv1; 3406 3407 sc->ciss_flags &= ~CISS_FLAG_CONTROL_OPEN; 3408 return (0); 3409 } 3410 3411 /******************************************************************************** 3412 * Handle adapter-specific control operations. 3413 * 3414 * Note that the API here is compatible with the Linux driver, in order to 3415 * simplify the porting of Compaq's userland tools. 3416 */ 3417 static int 3418 ciss_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, d_thread_t *p) 3419 { 3420 struct ciss_softc *sc; 3421 int error; 3422 3423 debug_called(1); 3424 3425 sc = (struct ciss_softc *)dev->si_drv1; 3426 error = 0; 3427 3428 switch(cmd) { 3429 case CCISS_GETPCIINFO: 3430 { 3431 cciss_pci_info_struct *pis = (cciss_pci_info_struct *)addr; 3432 3433 pis->bus = pci_get_bus(sc->ciss_dev); 3434 pis->dev_fn = pci_get_slot(sc->ciss_dev); 3435 pis->board_id = pci_get_devid(sc->ciss_dev); 3436 3437 break; 3438 } 3439 3440 case CCISS_GETINTINFO: 3441 { 3442 cciss_coalint_struct *cis = (cciss_coalint_struct *)addr; 3443 3444 cis->delay = sc->ciss_cfg->interrupt_coalesce_delay; 3445 cis->count = sc->ciss_cfg->interrupt_coalesce_count; 3446 3447 break; 3448 } 3449 3450 case CCISS_SETINTINFO: 3451 { 3452 cciss_coalint_struct *cis = (cciss_coalint_struct *)addr; 3453 3454 if ((cis->delay == 0) && (cis->count == 0)) { 3455 error = EINVAL; 3456 break; 3457 } 3458 3459 /* 3460 * XXX apparently this is only safe if the controller is idle, 3461 * we should suspend it before doing this. 3462 */ 3463 sc->ciss_cfg->interrupt_coalesce_delay = cis->delay; 3464 sc->ciss_cfg->interrupt_coalesce_count = cis->count; 3465 3466 if (ciss_update_config(sc)) 3467 error = EIO; 3468 3469 /* XXX resume the controller here */ 3470 break; 3471 } 3472 3473 case CCISS_GETNODENAME: 3474 bcopy(sc->ciss_cfg->server_name, (NodeName_type *)addr, 3475 sizeof(NodeName_type)); 3476 break; 3477 3478 case CCISS_SETNODENAME: 3479 bcopy((NodeName_type *)addr, sc->ciss_cfg->server_name, 3480 sizeof(NodeName_type)); 3481 if (ciss_update_config(sc)) 3482 error = EIO; 3483 break; 3484 3485 case CCISS_GETHEARTBEAT: 3486 *(Heartbeat_type *)addr = sc->ciss_cfg->heartbeat; 3487 break; 3488 3489 case CCISS_GETBUSTYPES: 3490 *(BusTypes_type *)addr = sc->ciss_cfg->bus_types; 3491 break; 3492 3493 case CCISS_GETFIRMVER: 3494 bcopy(sc->ciss_id->running_firmware_revision, (FirmwareVer_type *)addr, 3495 sizeof(FirmwareVer_type)); 3496 break; 3497 3498 case CCISS_GETDRIVERVER: 3499 *(DriverVer_type *)addr = CISS_DRIVER_VERSION; 3500 break; 3501 3502 case CCISS_REVALIDVOLS: 3503 /* 3504 * This is a bit ugly; to do it "right" we really need 3505 * to find any disks that have changed, kick CAM off them, 3506 * then rescan only these disks. It'd be nice if they 3507 * a) told us which disk(s) they were going to play with, 3508 * and b) which ones had arrived. 8( 3509 */ 3510 break; 3511 3512 case CCISS_PASSTHRU: 3513 error = ciss_user_command(sc, (IOCTL_Command_struct *)addr); 3514 break; 3515 3516 default: 3517 debug(0, "unknown ioctl 0x%lx", cmd); 3518 3519 debug(1, "CCISS_GETPCIINFO: 0x%lx", CCISS_GETPCIINFO); 3520 debug(1, "CCISS_GETINTINFO: 0x%lx", CCISS_GETINTINFO); 3521 debug(1, "CCISS_SETINTINFO: 0x%lx", CCISS_SETINTINFO); 3522 debug(1, "CCISS_GETNODENAME: 0x%lx", CCISS_GETNODENAME); 3523 debug(1, "CCISS_SETNODENAME: 0x%lx", CCISS_SETNODENAME); 3524 debug(1, "CCISS_GETHEARTBEAT: 0x%lx", CCISS_GETHEARTBEAT); 3525 debug(1, "CCISS_GETBUSTYPES: 0x%lx", CCISS_GETBUSTYPES); 3526 debug(1, "CCISS_GETFIRMVER: 0x%lx", CCISS_GETFIRMVER); 3527 debug(1, "CCISS_GETDRIVERVER: 0x%lx", CCISS_GETDRIVERVER); 3528 debug(1, "CCISS_REVALIDVOLS: 0x%lx", CCISS_REVALIDVOLS); 3529 debug(1, "CCISS_PASSTHRU: 0x%lx", CCISS_PASSTHRU); 3530 3531 error = ENOIOCTL; 3532 break; 3533 } 3534 3535 return(error); 3536 } 3537