xref: /freebsd/sys/dev/ath/if_athioctl.h (revision 74036c4de983981ee2b23f91e285363293aa7c3c)
1 /*-
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
13  *    redistribution must be conditioned upon including a substantially
14  *    similar Disclaimer requirement for further binary redistribution.
15  *
16  * NO WARRANTY
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
20  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
22  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
25  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
27  * THE POSSIBILITY OF SUCH DAMAGES.
28  *
29  * $FreeBSD$
30  */
31 
32 /*
33  * Ioctl-related defintions for the Atheros Wireless LAN controller driver.
34  */
35 #ifndef _DEV_ATH_ATHIOCTL_H
36 #define _DEV_ATH_ATHIOCTL_H
37 
38 struct ath_tx_aggr_stats {
39 	u_int32_t	aggr_pkts[64];
40 	u_int32_t	aggr_single_pkt;
41 	u_int32_t	aggr_nonbaw_pkt;
42 	u_int32_t	aggr_aggr_pkt;
43 	u_int32_t	aggr_baw_closed_single_pkt;
44 	u_int32_t	aggr_low_hwq_single_pkt;
45 	u_int32_t	aggr_sched_nopkt;
46 	u_int32_t	aggr_rts_aggr_limited;
47 };
48 
49 struct ath_intr_stats {
50 	u_int32_t	sync_intr[32];
51 };
52 
53 struct ath_stats {
54 	u_int32_t	ast_watchdog;	/* device reset by watchdog */
55 	u_int32_t	ast_hardware;	/* fatal hardware error interrupts */
56 	u_int32_t	ast_bmiss;	/* beacon miss interrupts */
57 	u_int32_t	ast_bmiss_phantom;/* beacon miss interrupts */
58 	u_int32_t	ast_bstuck;	/* beacon stuck interrupts */
59 	u_int32_t	ast_rxorn;	/* rx overrun interrupts */
60 	u_int32_t	ast_rxeol;	/* rx eol interrupts */
61 	u_int32_t	ast_txurn;	/* tx underrun interrupts */
62 	u_int32_t	ast_mib;	/* mib interrupts */
63 	u_int32_t	ast_intrcoal;	/* interrupts coalesced */
64 	u_int32_t	ast_tx_packets;	/* packet sent on the interface */
65 	u_int32_t	ast_tx_mgmt;	/* management frames transmitted */
66 	u_int32_t	ast_tx_discard;	/* frames discarded prior to assoc */
67 	u_int32_t	ast_tx_qstop;	/* output stopped 'cuz no buffer */
68 	u_int32_t	ast_tx_encap;	/* tx encapsulation failed */
69 	u_int32_t	ast_tx_nonode;	/* tx failed 'cuz no node */
70 	u_int32_t	ast_tx_nombuf;	/* tx failed 'cuz no mbuf */
71 	u_int32_t	ast_tx_nomcl;	/* tx failed 'cuz no cluster */
72 	u_int32_t	ast_tx_linear;	/* tx linearized to cluster */
73 	u_int32_t	ast_tx_nodata;	/* tx discarded empty frame */
74 	u_int32_t	ast_tx_busdma;	/* tx failed for dma resrcs */
75 	u_int32_t	ast_tx_xretries;/* tx failed 'cuz too many retries */
76 	u_int32_t	ast_tx_fifoerr;	/* tx failed 'cuz FIFO underrun */
77 	u_int32_t	ast_tx_filtered;/* tx failed 'cuz xmit filtered */
78 	u_int32_t	ast_tx_shortretry;/* tx on-chip retries (short) */
79 	u_int32_t	ast_tx_longretry;/* tx on-chip retries (long) */
80 	u_int32_t	ast_tx_badrate;	/* tx failed 'cuz bogus xmit rate */
81 	u_int32_t	ast_tx_noack;	/* tx frames with no ack marked */
82 	u_int32_t	ast_tx_rts;	/* tx frames with rts enabled */
83 	u_int32_t	ast_tx_cts;	/* tx frames with cts enabled */
84 	u_int32_t	ast_tx_shortpre;/* tx frames with short preamble */
85 	u_int32_t	ast_tx_altrate;	/* tx frames with alternate rate */
86 	u_int32_t	ast_tx_protect;	/* tx frames with protection */
87 	u_int32_t	ast_tx_ctsburst;/* tx frames with cts and bursting */
88 	u_int32_t	ast_tx_ctsext;	/* tx frames with cts extension */
89 	u_int32_t	ast_rx_nombuf;	/* rx setup failed 'cuz no mbuf */
90 	u_int32_t	ast_rx_busdma;	/* rx setup failed for dma resrcs */
91 	u_int32_t	ast_rx_orn;	/* rx failed 'cuz of desc overrun */
92 	u_int32_t	ast_rx_crcerr;	/* rx failed 'cuz of bad CRC */
93 	u_int32_t	ast_rx_fifoerr;	/* rx failed 'cuz of FIFO overrun */
94 	u_int32_t	ast_rx_badcrypt;/* rx failed 'cuz decryption */
95 	u_int32_t	ast_rx_badmic;	/* rx failed 'cuz MIC failure */
96 	u_int32_t	ast_rx_phyerr;	/* rx failed 'cuz of PHY err */
97 	u_int32_t	ast_rx_phy[64];	/* rx PHY error per-code counts */
98 	u_int32_t	ast_rx_tooshort;/* rx discarded 'cuz frame too short */
99 	u_int32_t	ast_rx_toobig;	/* rx discarded 'cuz frame too large */
100 	u_int32_t	ast_rx_packets;	/* packet recv on the interface */
101 	u_int32_t	ast_rx_mgt;	/* management frames received */
102 	u_int32_t	ast_rx_ctl;	/* rx discarded 'cuz ctl frame */
103 	int8_t		ast_tx_rssi;	/* tx rssi of last ack */
104 	int8_t		ast_rx_rssi;	/* rx rssi from histogram */
105 	u_int8_t	ast_tx_rate;	/* IEEE rate of last unicast tx */
106 	u_int32_t	ast_be_xmit;	/* beacons transmitted */
107 	u_int32_t	ast_be_nombuf;	/* beacon setup failed 'cuz no mbuf */
108 	u_int32_t	ast_per_cal;	/* periodic calibration calls */
109 	u_int32_t	ast_per_calfail;/* periodic calibration failed */
110 	u_int32_t	ast_per_rfgain;	/* periodic calibration rfgain reset */
111 	u_int32_t	ast_rate_calls;	/* rate control checks */
112 	u_int32_t	ast_rate_raise;	/* rate control raised xmit rate */
113 	u_int32_t	ast_rate_drop;	/* rate control dropped xmit rate */
114 	u_int32_t	ast_ant_defswitch;/* rx/default antenna switches */
115 	u_int32_t	ast_ant_txswitch;/* tx antenna switches */
116 	u_int32_t	ast_ant_rx[8];	/* rx frames with antenna */
117 	u_int32_t	ast_ant_tx[8];	/* tx frames with antenna */
118 	u_int32_t	ast_cabq_xmit;	/* cabq frames transmitted */
119 	u_int32_t	ast_cabq_busy;	/* cabq found busy */
120 	u_int32_t	ast_tx_raw;	/* tx frames through raw api */
121 	u_int32_t	ast_ff_txok;	/* fast frames tx'd successfully */
122 	u_int32_t	ast_ff_txerr;	/* fast frames tx'd w/ error */
123 	u_int32_t	ast_ff_rx;	/* fast frames rx'd */
124 	u_int32_t	ast_ff_flush;	/* fast frames flushed from staging q */
125 	u_int32_t	ast_tx_qfull;	/* tx dropped 'cuz of queue limit */
126 	int8_t		ast_rx_noise;	/* rx noise floor */
127 	u_int32_t	ast_tx_nobuf;	/* tx dropped 'cuz no ath buffer */
128 	u_int32_t	ast_tdma_update;/* TDMA slot timing updates */
129 	u_int32_t	ast_tdma_timers;/* TDMA slot update set beacon timers */
130 	u_int32_t	ast_tdma_tsf;	/* TDMA slot update set TSF */
131 	u_int16_t	ast_tdma_tsfadjp;/* TDMA slot adjust+ (usec, smoothed)*/
132 	u_int16_t	ast_tdma_tsfadjm;/* TDMA slot adjust- (usec, smoothed)*/
133 	u_int32_t	ast_tdma_ack;	/* TDMA tx failed 'cuz ACK required */
134 	u_int32_t	ast_tx_raw_fail;/* raw tx failed 'cuz h/w down */
135 	u_int32_t	ast_tx_nofrag;	/* tx dropped 'cuz no ath frag buffer */
136 	u_int32_t	ast_be_missed;	/* missed beacons */
137 	u_int32_t	ast_ani_cal;	/* ANI calibrations performed */
138 	u_int32_t	ast_rx_agg;	/* number of aggregate frames RX'ed */
139 	u_int32_t	ast_rx_halfgi;	/* RX half-GI */
140 	u_int32_t	ast_rx_2040;	/* RX 40mhz frame */
141 	u_int32_t	ast_rx_pre_crc_err;	/* RX pre-delimiter CRC error */
142 	u_int32_t	ast_rx_post_crc_err;	/* RX post-delimiter CRC error */
143 	u_int32_t	ast_rx_decrypt_busy_err;	/* RX decrypt engine busy error */
144 	u_int32_t	ast_rx_hi_rx_chain;
145 	u_int32_t	ast_tx_htprotect;	/* HT tx frames with protection */
146 	u_int32_t	ast_rx_hitqueueend;	/* RX hit descr queue end */
147 	u_int32_t	ast_tx_timeout;		/* Global TX timeout */
148 	u_int32_t	ast_tx_cst;		/* Carrier sense timeout */
149 	u_int32_t	ast_tx_xtxop;	/* tx exceeded TXOP */
150 	u_int32_t	ast_tx_timerexpired;	/* tx exceeded TX_TIMER */
151 	u_int32_t	ast_tx_desccfgerr;	/* tx desc cfg error */
152 	u_int32_t	ast_tx_swretries;	/* software TX retries */
153 	u_int32_t	ast_tx_swretrymax;	/* software TX retry max limit reach */
154 	u_int32_t	ast_tx_data_underrun;
155 	u_int32_t	ast_tx_delim_underrun;
156 	u_int32_t	ast_tx_aggr_failall;	/* aggregate TX failed in its entirety */
157 	u_int32_t	ast_tx_getnobuf;
158 	u_int32_t	ast_tx_getbusybuf;
159 	u_int32_t	ast_tx_intr;
160 	u_int32_t	ast_rx_intr;
161 	u_int32_t	ast_tx_aggr_ok;		/* aggregate TX ok */
162 	u_int32_t	ast_tx_aggr_fail;	/* aggregate TX failed */
163 	u_int32_t	ast_tx_mcastq_overflow;	/* multicast queue overflow */
164 	u_int32_t	ast_rx_keymiss;
165 	u_int32_t	ast_tx_swfiltered;
166 	u_int32_t	ast_tx_node_psq_overflow;
167 	u_int32_t	ast_rx_stbc;		/* RX STBC frame */
168 	u_int32_t	ast_tx_nodeq_overflow;	/* node sw queue overflow */
169 	u_int32_t	ast_pad[12];
170 };
171 
172 #define	SIOCGATHSTATS	_IOWR('i', 137, struct ifreq)
173 #define	SIOCZATHSTATS	_IOWR('i', 139, struct ifreq)
174 #define	SIOCGATHAGSTATS	_IOWR('i', 141, struct ifreq)
175 
176 struct ath_diag {
177 	char	ad_name[IFNAMSIZ];	/* if name, e.g. "ath0" */
178 	u_int16_t ad_id;
179 #define	ATH_DIAG_DYN	0x8000		/* allocate buffer in caller */
180 #define	ATH_DIAG_IN	0x4000		/* copy in parameters */
181 #define	ATH_DIAG_OUT	0x0000		/* copy out results (always) */
182 #define	ATH_DIAG_ID	0x0fff
183 	u_int16_t ad_in_size;		/* pack to fit, yech */
184 	caddr_t	ad_in_data;
185 	caddr_t	ad_out_data;
186 	u_int	ad_out_size;
187 
188 };
189 #define	SIOCGATHDIAG	_IOWR('i', 138, struct ath_diag)
190 #define	SIOCGATHPHYERR	_IOWR('i', 140, struct ath_diag)
191 
192 
193 /*
194  * The rate control ioctl has to support multiple potential rate
195  * control classes.  For now, instead of trying to support an
196  * abstraction for this in the API, let's just use a TLV
197  * representation for the payload and let userspace sort it out.
198  */
199 struct ath_rateioctl_tlv {
200 	uint16_t	tlv_id;
201 	uint16_t	tlv_len;	/* length excluding TLV header */
202 };
203 
204 /*
205  * This is purely the six byte MAC address.
206  */
207 #define	ATH_RATE_TLV_MACADDR		0xaab0
208 
209 /*
210  * The rate control modules may decide to push a mapping table
211  * of rix -> net80211 ratecode as part of the update.
212  */
213 #define	ATH_RATE_TLV_RATETABLE_NENTRIES	64
214 struct ath_rateioctl_rt {
215 	uint16_t	nentries;
216 	uint16_t	pad[1];
217 	uint8_t		ratecode[ATH_RATE_TLV_RATETABLE_NENTRIES];
218 };
219 #define	ATH_RATE_TLV_RATETABLE		0xaab1
220 
221 /*
222  * This is the sample node statistics structure.
223  * More in ath_rate/sample/sample.h.
224  */
225 #define	ATH_RATE_TLV_SAMPLENODE		0xaab2
226 
227 struct ath_rateioctl {
228 	char	if_name[IFNAMSIZ];	/* if name */
229 	union {
230 		uint8_t		macaddr[IEEE80211_ADDR_LEN];
231 		uint64_t	pad;
232 	} is_u;
233 	uint32_t		len;
234 	caddr_t			buf;
235 };
236 #define	SIOCGATHNODERATESTATS	_IOWR('i', 149, struct ath_rateioctl)
237 #define	SIOCGATHRATESTATS	_IOWR('i', 150, struct ath_rateioctl)
238 
239 /*
240  * Radio capture format.
241  */
242 #define ATH_RX_RADIOTAP_PRESENT_BASE (		\
243 	(1 << IEEE80211_RADIOTAP_TSFT)		| \
244 	(1 << IEEE80211_RADIOTAP_FLAGS)		| \
245 	(1 << IEEE80211_RADIOTAP_RATE)		| \
246 	(1 << IEEE80211_RADIOTAP_ANTENNA)	| \
247 	(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL)	| \
248 	(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE)	| \
249 	(1 << IEEE80211_RADIOTAP_XCHANNEL)	| \
250 	0)
251 
252 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
253 #define	ATH_RX_RADIOTAP_PRESENT \
254 	(ATH_RX_RADIOTAP_PRESENT_BASE		| \
255 	(1 << IEEE80211_RADIOTAP_VENDOREXT)	| \
256 	(1 << IEEE80211_RADIOTAP_EXT)		| \
257 	0)
258 #else
259 #define	ATH_RX_RADIOTAP_PRESENT	ATH_RX_RADIOTAP_PRESENT_BASE
260 #endif	/* ATH_ENABLE_RADIOTAP_PRESENT */
261 
262 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
263 /*
264  * This is higher than the vendor bitmap used inside
265  * the Atheros reference codebase.
266  */
267 
268 /* Bit 8 */
269 #define	ATH_RADIOTAP_VENDOR_HEADER	8
270 
271 /*
272  * Using four chains makes all the fields in the
273  * per-chain info header be 4-byte aligned.
274  */
275 #define	ATH_RADIOTAP_MAX_CHAINS		4
276 
277 /*
278  * AR9380 and later chips are 3x3, which requires
279  * 5 EVM DWORDs in HT40 mode.
280  */
281 #define	ATH_RADIOTAP_MAX_EVM		5
282 
283 /*
284  * The vendor radiotap header data needs to be:
285  *
286  * + Aligned to a 4 byte address
287  * + .. so all internal fields are 4 bytes aligned;
288  * + .. and no 64 bit fields are allowed.
289  *
290  * So padding is required to ensure this is the case.
291  *
292  * Note that because of the lack of alignment with the
293  * vendor header (6 bytes), the first field must be
294  * two bytes so it can be accessed by alignment-strict
295  * platform (eg MIPS.)
296  */
297 struct ath_radiotap_vendor_hdr {		/* 30 bytes */
298 	uint8_t		vh_version;		/* 1 */
299 	uint8_t		vh_rx_chainmask;	/* 1 */
300 
301 	/* At this point it should be 4 byte aligned */
302 	uint32_t	evm[ATH_RADIOTAP_MAX_EVM];	/* 5 * 4 = 20 */
303 
304 	uint8_t		rssi_ctl[ATH_RADIOTAP_MAX_CHAINS];	/* 4 */
305 	uint8_t		rssi_ext[ATH_RADIOTAP_MAX_CHAINS];	/* 4 */
306 
307 	uint8_t		vh_phyerr_code;	/* Phy error code, or 0xff */
308 	uint8_t		vh_rs_status;	/* RX status */
309 	uint8_t		vh_rssi;	/* Raw RSSI */
310 	uint8_t		vh_flags;	/* General flags */
311 #define	ATH_VENDOR_PKT_RX	0x01
312 #define	ATH_VENDOR_PKT_TX	0x02
313 #define	ATH_VENDOR_PKT_RXPHYERR	0x04
314 #define	ATH_VENDOR_PKT_ISAGGR	0x08
315 #define	ATH_VENDOR_PKT_MOREAGGR	0x10
316 
317 	uint8_t		vh_rx_hwrate;	/* hardware RX ratecode */
318 	uint8_t		vh_rs_flags;	/* RX HAL flags */
319 	uint8_t		vh_pad[2];	/* pad to DWORD boundary */
320 } __packed;
321 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
322 
323 struct ath_rx_radiotap_header {
324 	struct ieee80211_radiotap_header wr_ihdr;
325 
326 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
327 	/* Vendor extension header bitmap */
328 	uint32_t	wr_ext_bitmap;          /* 4 */
329 
330 	/*
331 	 * This padding is needed because:
332 	 * + the radiotap header is 8 bytes;
333 	 * + the extension bitmap is 4 bytes;
334 	 * + the tsf is 8 bytes, so it must start on an 8 byte
335 	 *   boundary.
336 	 */
337 	uint32_t	wr_pad1;
338 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
339 
340 	/* Normal radiotap fields */
341 	u_int64_t	wr_tsf;
342 	u_int8_t	wr_flags;
343 	u_int8_t	wr_rate;
344 	int8_t		wr_antsignal;
345 	int8_t		wr_antnoise;
346 	u_int8_t	wr_antenna;
347 	u_int8_t	wr_pad[3];
348 	u_int32_t	wr_chan_flags;
349 	u_int16_t	wr_chan_freq;
350 	u_int8_t	wr_chan_ieee;
351 	int8_t		wr_chan_maxpow;
352 
353 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
354 	/*
355 	 * Vendor header section, as required by the
356 	 * presence of the vendor extension bit and bitmap
357 	 * entry.
358 	 *
359 	 * XXX This must be aligned to a 4 byte address?
360 	 * XXX or 8 byte address?
361 	 */
362 	struct ieee80211_radiotap_vendor_header wr_vh;  /* 6 bytes */
363 
364 	/*
365 	 * Because of the lack of alignment enforced by the above
366 	 * header, this vendor section won't be aligned in any
367 	 * useful way.  So, this will include a two-byte version
368 	 * value which will force the structure to be 4-byte aligned.
369 	 */
370 	struct ath_radiotap_vendor_hdr wr_v;
371 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
372 } __packed;
373 
374 #define ATH_TX_RADIOTAP_PRESENT (		\
375 	(1 << IEEE80211_RADIOTAP_TSFT)		| \
376 	(1 << IEEE80211_RADIOTAP_FLAGS)		| \
377 	(1 << IEEE80211_RADIOTAP_RATE)		| \
378 	(1 << IEEE80211_RADIOTAP_DBM_TX_POWER)	| \
379 	(1 << IEEE80211_RADIOTAP_ANTENNA)	| \
380 	(1 << IEEE80211_RADIOTAP_XCHANNEL)	| \
381 	0)
382 
383 struct ath_tx_radiotap_header {
384 	struct ieee80211_radiotap_header wt_ihdr;
385 	u_int64_t	wt_tsf;
386 	u_int8_t	wt_flags;
387 	u_int8_t	wt_rate;
388 	u_int8_t	wt_txpower;
389 	u_int8_t	wt_antenna;
390 	u_int32_t	wt_chan_flags;
391 	u_int16_t	wt_chan_freq;
392 	u_int8_t	wt_chan_ieee;
393 	int8_t		wt_chan_maxpow;
394 } __packed;
395 
396 /*
397  * DFS ioctl commands
398  */
399 
400 #define	DFS_SET_THRESH		2
401 #define	DFS_GET_THRESH		3
402 #define	DFS_RADARDETECTS	6
403 
404 /*
405  * DFS ioctl parameter types
406  */
407 #define DFS_PARAM_FIRPWR	1
408 #define DFS_PARAM_RRSSI		2
409 #define DFS_PARAM_HEIGHT	3
410 #define DFS_PARAM_PRSSI		4
411 #define DFS_PARAM_INBAND	5
412 #define DFS_PARAM_NOL		6	/* XXX not used in FreeBSD */
413 #define DFS_PARAM_RELSTEP_EN	7
414 #define DFS_PARAM_RELSTEP	8
415 #define DFS_PARAM_RELPWR_EN	9
416 #define DFS_PARAM_RELPWR	10
417 #define DFS_PARAM_MAXLEN	11
418 #define DFS_PARAM_USEFIR128	12
419 #define DFS_PARAM_BLOCKRADAR	13
420 #define DFS_PARAM_MAXRSSI_EN	14
421 
422 /* FreeBSD-specific start at 32 */
423 #define	DFS_PARAM_ENABLE	32
424 #define	DFS_PARAM_EN_EXTCH	33
425 
426 /*
427  * Spectral ioctl parameter types
428  */
429 #define	SPECTRAL_PARAM_FFT_PERIOD	1
430 #define	SPECTRAL_PARAM_SS_PERIOD	2
431 #define	SPECTRAL_PARAM_SS_COUNT		3
432 #define	SPECTRAL_PARAM_SS_SHORT_RPT	4
433 #define	SPECTRAL_PARAM_ENABLED		5
434 #define	SPECTRAL_PARAM_ACTIVE		6
435 
436 /*
437  * Spectral control parameters
438  */
439 #define	SIOCGATHSPECTRAL	_IOWR('i', 151, struct ath_diag)
440 
441 #define	SPECTRAL_CONTROL_ENABLE		2
442 #define	SPECTRAL_CONTROL_DISABLE	3
443 #define	SPECTRAL_CONTROL_START		4
444 #define	SPECTRAL_CONTROL_STOP		5
445 #define	SPECTRAL_CONTROL_GET_PARAMS	6
446 #define	SPECTRAL_CONTROL_SET_PARAMS	7
447 #define	SPECTRAL_CONTROL_ENABLE_AT_RESET	8
448 #define	SPECTRAL_CONTROL_DISABLE_AT_RESET	9
449 
450 #endif /* _DEV_ATH_ATHIOCTL_H */
451