sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

[ath] do a cold reset if TSFOOR triggers

TSFOOR happens if a beacon with a given TSF isn't received within the
programmed/expected TSF value, plus/minus a fudge range. (OOR == out of range.)

If thi

[ath] do a cold reset if TSFOOR triggers

TSFOOR happens if a beacon with a given TSF isn't received within the
programmed/expected TSF value, plus/minus a fudge range. (OOR == out of range.)

If this happens then it could be because the baseband/mac is stuck, or
the baseband is deaf. So, do a cold reset and resync the beacon to
try and unstick the hardware.

It also happens when a bad AP decides to err, slew its TSF because they
themselves are resetting and they don't preserve the TSF "well."

This has fixed a bunch of weird corner cases on my 2GHz AP radio upstairs
here where it occasionally goes deaf due to how much 2GHz noise is up
here (and ANI gets a little sideways) and this unsticks the station
VAP.

For AP modes a hung baseband/mac usually ends up as a stuck beacon
and those have been addressed for a long time by just resetting the
hardware. But similar hangs in station mode didn't have a similar
recovery mechanism.

Tested:

* AR9380, STA mode, 2GHz/5GHz
* AR9580, STA mode, 5GHz
* QCA9344 SoC w/ on-board wifi (TL-WDR4300/3600 devices); 2GHz
STA mode

show more ...

[ath] replace the hard-coded magic values in if_athioctl.h with constant defines

Replace some hard-coded magic values in the ioctl stats struct with
#defines. I'm going to follow up with some more

[ath] replace the hard-coded magic values in if_athioctl.h with constant defines

Replace some hard-coded magic values in the ioctl stats struct with
#defines. I'm going to follow up with some more sanity checking in
the receive path that also use these values so we don't do bad
things if the hardware is (more) confused.

show more ...

ath: clean up empty lines in .c and .h files

MFHead@r345275

MFhead@r344996

Fix ieee80211_radiotap(9) usage in wireless drivers:

- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be

Fix ieee80211_radiotap(9) usage in wireless drivers:

- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.

- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.

Tested with Netgear WG111 v3 (urtw(4)), STA mode.

MFC after: 2 weeks

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r313055 through r313300.

MFhead@r313243

[ath] add spectral scan priority.

Merge ^/head r309213 through r309262.

[ath] Begin to lay the groundwork for btcoex related ioctl controls.

Merge ^/head r305892 through r306302.

net80211: remove IEEE80211_RADIOTAP_TSFT field from transmit definitions.

This field may be used for received frames only.

Differential Revision: https://reviews.freebsd.org/D3826
Differential Revi

net80211: remove IEEE80211_RADIOTAP_TSFT field from transmit definitions.

This field may be used for received frames only.

Differential Revision: https://reviews.freebsd.org/D3826
Differential Revision: https://reviews.freebsd.org/D3827

show more ...

Merge ^/head r303250 through r304235.

[ath] update comments.

[ath] Add counters for STBC TX and LDPC TX.

This is a big no-op until the TX path changes to enable LDPC TX are
added.

Merge from head

IFC @ r254014

IFC @253398

Merge fresh head.

Implement my first cut at "correct" node power-save and
PS-POLL support.

This implements PS-POLL awareness i nthe

* Implement frame "leaking", which allows for a software queue
to be scheduled ev

Implement my first cut at "correct" node power-save and
PS-POLL support.

This implements PS-POLL awareness i nthe

* Implement frame "leaking", which allows for a software queue
to be scheduled even though it's asleep
* Track whether a frame has been leaked or not
* Leak out a single non-AMPDU frame when transmitting aggregates
* Queue BAR frames if the node is asleep
* Direct-dispatch the rest of control and management frames.
This allows for things like re-association to occur (which involves
sending probe req/resp as well as assoc request/response) when
the node is asleep and then tries reassociating.
* Limit how many frames can set in the software node queue whilst
the node is asleep. net80211 is already buffering frames for us
so this is mostly just paranoia.
* Add a PS-POLL method which leaks out a frame if there's something
in the software queue, else it calls net80211's ps-poll routine.
Since the ath PS-POLL routine marks the node as having a single frame
to leak, either a software queued frame would leak, OR the next queued
frame would leak. The next queued frame could be something from the
net80211 power save queue, OR it could be a NULL frame from net80211.

TODO:

* Don't transmit further BAR frames (eg via a timeout) if the node is
currently asleep. Otherwise we may end up exhausting management frames
due to the lots of queued BAR frames.

I may just undo this bit later on and direct-dispatch BAR frames
even if the node is asleep.

* It would be nice to burst out a single A-MPDU frame if both ends
support this. I may end adding a FreeBSD IE soon to negotiate
this power save behaviour.

* I should make STAs timeout of power save mode if they've been in power
save for more than a handful of seconds. This way cards that get
"stuck" in power save mode don't stay there for the "inactivity" timeout
in net80211.

* Move the queue depth check into the driver layer (ath_start / ath_transmit)
rather than doing it in the TX path.

* There could be some naughty corner cases with ps-poll leaking.
Specifically, if net80211 generates a NULL data frame whilst another
transmitter sends a normal data frame out net80211 output / transmit,
we need to ensure that the NULL data frame goes out first.
This is one of those things that should occur inside the VAP/ic TX lock.
Grr, more investigations to do..

Tested:

* STA: AR5416, AR9280
* AP: AR5416, AR9280, AR9160

show more ...

Implement STBC receive frame statistics.

The AR9280 and later can receive STBC. This adds some statistics
tracking to count these frames.

A patch to athstats will be forthcoming.