xref: /freebsd/sys/dev/ath/if_athioctl.h (revision 1fb62fb074788ca4713551be09d6569966a3abee)
1 /*-
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
13  *    redistribution must be conditioned upon including a substantially
14  *    similar Disclaimer requirement for further binary redistribution.
15  *
16  * NO WARRANTY
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
20  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
22  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
25  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
27  * THE POSSIBILITY OF SUCH DAMAGES.
28  *
29  * $FreeBSD$
30  */
31 
32 /*
33  * Ioctl-related defintions for the Atheros Wireless LAN controller driver.
34  */
35 #ifndef _DEV_ATH_ATHIOCTL_H
36 #define _DEV_ATH_ATHIOCTL_H
37 
38 struct ath_tx_aggr_stats {
39 	u_int32_t	aggr_pkts[64];
40 	u_int32_t	aggr_single_pkt;
41 	u_int32_t	aggr_nonbaw_pkt;
42 	u_int32_t	aggr_aggr_pkt;
43 	u_int32_t	aggr_baw_closed_single_pkt;
44 	u_int32_t	aggr_low_hwq_single_pkt;
45 	u_int32_t	aggr_sched_nopkt;
46 	u_int32_t	aggr_rts_aggr_limited;
47 };
48 
49 struct ath_intr_stats {
50 	u_int32_t	sync_intr[32];
51 };
52 
53 struct ath_stats {
54 	u_int32_t	ast_watchdog;	/* device reset by watchdog */
55 	u_int32_t	ast_hardware;	/* fatal hardware error interrupts */
56 	u_int32_t	ast_bmiss;	/* beacon miss interrupts */
57 	u_int32_t	ast_bmiss_phantom;/* beacon miss interrupts */
58 	u_int32_t	ast_bstuck;	/* beacon stuck interrupts */
59 	u_int32_t	ast_rxorn;	/* rx overrun interrupts */
60 	u_int32_t	ast_rxeol;	/* rx eol interrupts */
61 	u_int32_t	ast_txurn;	/* tx underrun interrupts */
62 	u_int32_t	ast_mib;	/* mib interrupts */
63 	u_int32_t	ast_intrcoal;	/* interrupts coalesced */
64 	u_int32_t	ast_tx_packets;	/* packet sent on the interface */
65 	u_int32_t	ast_tx_mgmt;	/* management frames transmitted */
66 	u_int32_t	ast_tx_discard;	/* frames discarded prior to assoc */
67 	u_int32_t	ast_tx_qstop;	/* output stopped 'cuz no buffer */
68 	u_int32_t	ast_tx_encap;	/* tx encapsulation failed */
69 	u_int32_t	ast_tx_nonode;	/* tx failed 'cuz no node */
70 	u_int32_t	ast_tx_nombuf;	/* tx failed 'cuz no mbuf */
71 	u_int32_t	ast_tx_nomcl;	/* tx failed 'cuz no cluster */
72 	u_int32_t	ast_tx_linear;	/* tx linearized to cluster */
73 	u_int32_t	ast_tx_nodata;	/* tx discarded empty frame */
74 	u_int32_t	ast_tx_busdma;	/* tx failed for dma resrcs */
75 	u_int32_t	ast_tx_xretries;/* tx failed 'cuz too many retries */
76 	u_int32_t	ast_tx_fifoerr;	/* tx failed 'cuz FIFO underrun */
77 	u_int32_t	ast_tx_filtered;/* tx failed 'cuz xmit filtered */
78 	u_int32_t	ast_tx_shortretry;/* tx on-chip retries (short) */
79 	u_int32_t	ast_tx_longretry;/* tx on-chip retries (long) */
80 	u_int32_t	ast_tx_badrate;	/* tx failed 'cuz bogus xmit rate */
81 	u_int32_t	ast_tx_noack;	/* tx frames with no ack marked */
82 	u_int32_t	ast_tx_rts;	/* tx frames with rts enabled */
83 	u_int32_t	ast_tx_cts;	/* tx frames with cts enabled */
84 	u_int32_t	ast_tx_shortpre;/* tx frames with short preamble */
85 	u_int32_t	ast_tx_altrate;	/* tx frames with alternate rate */
86 	u_int32_t	ast_tx_protect;	/* tx frames with protection */
87 	u_int32_t	ast_tx_ctsburst;/* tx frames with cts and bursting */
88 	u_int32_t	ast_tx_ctsext;	/* tx frames with cts extension */
89 	u_int32_t	ast_rx_nombuf;	/* rx setup failed 'cuz no mbuf */
90 	u_int32_t	ast_rx_busdma;	/* rx setup failed for dma resrcs */
91 	u_int32_t	ast_rx_orn;	/* rx failed 'cuz of desc overrun */
92 	u_int32_t	ast_rx_crcerr;	/* rx failed 'cuz of bad CRC */
93 	u_int32_t	ast_rx_fifoerr;	/* rx failed 'cuz of FIFO overrun */
94 	u_int32_t	ast_rx_badcrypt;/* rx failed 'cuz decryption */
95 	u_int32_t	ast_rx_badmic;	/* rx failed 'cuz MIC failure */
96 	u_int32_t	ast_rx_phyerr;	/* rx failed 'cuz of PHY err */
97 	u_int32_t	ast_rx_phy[64];	/* rx PHY error per-code counts */
98 	u_int32_t	ast_rx_tooshort;/* rx discarded 'cuz frame too short */
99 	u_int32_t	ast_rx_toobig;	/* rx discarded 'cuz frame too large */
100 	u_int32_t	ast_rx_packets;	/* packet recv on the interface */
101 	u_int32_t	ast_rx_mgt;	/* management frames received */
102 	u_int32_t	ast_rx_ctl;	/* rx discarded 'cuz ctl frame */
103 	int8_t		ast_tx_rssi;	/* tx rssi of last ack */
104 	int8_t		ast_rx_rssi;	/* rx rssi from histogram */
105 	u_int8_t	ast_tx_rate;	/* IEEE rate of last unicast tx */
106 	u_int32_t	ast_be_xmit;	/* beacons transmitted */
107 	u_int32_t	ast_be_nombuf;	/* beacon setup failed 'cuz no mbuf */
108 	u_int32_t	ast_per_cal;	/* periodic calibration calls */
109 	u_int32_t	ast_per_calfail;/* periodic calibration failed */
110 	u_int32_t	ast_per_rfgain;	/* periodic calibration rfgain reset */
111 	u_int32_t	ast_rate_calls;	/* rate control checks */
112 	u_int32_t	ast_rate_raise;	/* rate control raised xmit rate */
113 	u_int32_t	ast_rate_drop;	/* rate control dropped xmit rate */
114 	u_int32_t	ast_ant_defswitch;/* rx/default antenna switches */
115 	u_int32_t	ast_ant_txswitch;/* tx antenna switches */
116 	u_int32_t	ast_ant_rx[8];	/* rx frames with antenna */
117 	u_int32_t	ast_ant_tx[8];	/* tx frames with antenna */
118 	u_int32_t	ast_cabq_xmit;	/* cabq frames transmitted */
119 	u_int32_t	ast_cabq_busy;	/* cabq found busy */
120 	u_int32_t	ast_tx_raw;	/* tx frames through raw api */
121 	u_int32_t	ast_ff_txok;	/* fast frames tx'd successfully */
122 	u_int32_t	ast_ff_txerr;	/* fast frames tx'd w/ error */
123 	u_int32_t	ast_ff_rx;	/* fast frames rx'd */
124 	u_int32_t	ast_ff_flush;	/* fast frames flushed from staging q */
125 	u_int32_t	ast_tx_qfull;	/* tx dropped 'cuz of queue limit */
126 	int8_t		ast_rx_noise;	/* rx noise floor */
127 	u_int32_t	ast_tx_nobuf;	/* tx dropped 'cuz no ath buffer */
128 	u_int32_t	ast_tdma_update;/* TDMA slot timing updates */
129 	u_int32_t	ast_tdma_timers;/* TDMA slot update set beacon timers */
130 	u_int32_t	ast_tdma_tsf;	/* TDMA slot update set TSF */
131 	u_int16_t	ast_tdma_tsfadjp;/* TDMA slot adjust+ (usec, smoothed)*/
132 	u_int16_t	ast_tdma_tsfadjm;/* TDMA slot adjust- (usec, smoothed)*/
133 	u_int32_t	ast_tdma_ack;	/* TDMA tx failed 'cuz ACK required */
134 	u_int32_t	ast_tx_raw_fail;/* raw tx failed 'cuz h/w down */
135 	u_int32_t	ast_tx_nofrag;	/* tx dropped 'cuz no ath frag buffer */
136 	u_int32_t	ast_be_missed;	/* missed beacons */
137 	u_int32_t	ast_ani_cal;	/* ANI calibrations performed */
138 	u_int32_t	ast_rx_agg;	/* number of aggregate frames RX'ed */
139 	u_int32_t	ast_rx_halfgi;	/* RX half-GI */
140 	u_int32_t	ast_rx_2040;	/* RX 40mhz frame */
141 	u_int32_t	ast_rx_pre_crc_err;	/* RX pre-delimiter CRC error */
142 	u_int32_t	ast_rx_post_crc_err;	/* RX post-delimiter CRC error */
143 	u_int32_t	ast_rx_decrypt_busy_err;	/* RX decrypt engine busy error */
144 	u_int32_t	ast_rx_hi_rx_chain;
145 	u_int32_t	ast_tx_htprotect;	/* HT tx frames with protection */
146 	u_int32_t	ast_rx_hitqueueend;	/* RX hit descr queue end */
147 	u_int32_t	ast_tx_timeout;		/* Global TX timeout */
148 	u_int32_t	ast_tx_cst;		/* Carrier sense timeout */
149 	u_int32_t	ast_tx_xtxop;	/* tx exceeded TXOP */
150 	u_int32_t	ast_tx_timerexpired;	/* tx exceeded TX_TIMER */
151 	u_int32_t	ast_tx_desccfgerr;	/* tx desc cfg error */
152 	u_int32_t	ast_tx_swretries;	/* software TX retries */
153 	u_int32_t	ast_tx_swretrymax;	/* software TX retry max limit reach */
154 	u_int32_t	ast_tx_data_underrun;
155 	u_int32_t	ast_tx_delim_underrun;
156 	u_int32_t	ast_tx_aggr_failall;	/* aggregate TX failed in its entirety */
157 	u_int32_t	ast_tx_getnobuf;
158 	u_int32_t	ast_tx_getbusybuf;
159 	u_int32_t	ast_tx_intr;
160 	u_int32_t	ast_rx_intr;
161 	u_int32_t	ast_tx_aggr_ok;		/* aggregate TX ok */
162 	u_int32_t	ast_tx_aggr_fail;	/* aggregate TX failed */
163 	u_int32_t	ast_tx_mcastq_overflow;	/* multicast queue overflow */
164 	u_int32_t	ast_rx_keymiss;
165 	u_int32_t	ast_tx_swfiltered;
166 	u_int32_t	ast_tx_node_psq_overflow;
167 	u_int32_t	ast_rx_stbc;		/* RX STBC frame */
168 	u_int32_t	ast_tx_nodeq_overflow;	/* node sw queue overflow */
169 	u_int32_t	ast_tx_ldpc;		/* TX LDPC frame */
170 	u_int32_t	ast_tx_stbc;		/* TX STBC frame */
171 	u_int32_t	ast_pad[10];
172 };
173 
174 #define	SIOCGATHSTATS	_IOWR('i', 137, struct ifreq)
175 #define	SIOCZATHSTATS	_IOWR('i', 139, struct ifreq)
176 #define	SIOCGATHAGSTATS	_IOWR('i', 141, struct ifreq)
177 
178 struct ath_diag {
179 	char	ad_name[IFNAMSIZ];	/* if name, e.g. "ath0" */
180 	u_int16_t ad_id;
181 #define	ATH_DIAG_DYN	0x8000		/* allocate buffer in caller */
182 #define	ATH_DIAG_IN	0x4000		/* copy in parameters */
183 #define	ATH_DIAG_OUT	0x0000		/* copy out results (always) */
184 #define	ATH_DIAG_ID	0x0fff
185 	u_int16_t ad_in_size;		/* pack to fit, yech */
186 	caddr_t	ad_in_data;
187 	caddr_t	ad_out_data;
188 	u_int	ad_out_size;
189 
190 };
191 #define	SIOCGATHDIAG	_IOWR('i', 138, struct ath_diag)
192 #define	SIOCGATHPHYERR	_IOWR('i', 140, struct ath_diag)
193 
194 
195 /*
196  * The rate control ioctl has to support multiple potential rate
197  * control classes.  For now, instead of trying to support an
198  * abstraction for this in the API, let's just use a TLV
199  * representation for the payload and let userspace sort it out.
200  */
201 struct ath_rateioctl_tlv {
202 	uint16_t	tlv_id;
203 	uint16_t	tlv_len;	/* length excluding TLV header */
204 };
205 
206 /*
207  * This is purely the six byte MAC address.
208  */
209 #define	ATH_RATE_TLV_MACADDR		0xaab0
210 
211 /*
212  * The rate control modules may decide to push a mapping table
213  * of rix -> net80211 ratecode as part of the update.
214  */
215 #define	ATH_RATE_TLV_RATETABLE_NENTRIES	64
216 struct ath_rateioctl_rt {
217 	uint16_t	nentries;
218 	uint16_t	pad[1];
219 	uint8_t		ratecode[ATH_RATE_TLV_RATETABLE_NENTRIES];
220 };
221 #define	ATH_RATE_TLV_RATETABLE		0xaab1
222 
223 /*
224  * This is the sample node statistics structure.
225  * More in ath_rate/sample/sample.h.
226  */
227 #define	ATH_RATE_TLV_SAMPLENODE		0xaab2
228 
229 struct ath_rateioctl {
230 	char	if_name[IFNAMSIZ];	/* if name */
231 	union {
232 		uint8_t		macaddr[IEEE80211_ADDR_LEN];
233 		uint64_t	pad;
234 	} is_u;
235 	uint32_t		len;
236 	caddr_t			buf;
237 };
238 #define	SIOCGATHNODERATESTATS	_IOWR('i', 149, struct ath_rateioctl)
239 #define	SIOCGATHRATESTATS	_IOWR('i', 150, struct ath_rateioctl)
240 
241 /*
242  * Radio capture format.
243  */
244 #define ATH_RX_RADIOTAP_PRESENT_BASE (		\
245 	(1 << IEEE80211_RADIOTAP_TSFT)		| \
246 	(1 << IEEE80211_RADIOTAP_FLAGS)		| \
247 	(1 << IEEE80211_RADIOTAP_RATE)		| \
248 	(1 << IEEE80211_RADIOTAP_ANTENNA)	| \
249 	(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL)	| \
250 	(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE)	| \
251 	(1 << IEEE80211_RADIOTAP_XCHANNEL)	| \
252 	0)
253 
254 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
255 #define	ATH_RX_RADIOTAP_PRESENT \
256 	(ATH_RX_RADIOTAP_PRESENT_BASE		| \
257 	(1 << IEEE80211_RADIOTAP_VENDOREXT)	| \
258 	(1 << IEEE80211_RADIOTAP_EXT)		| \
259 	0)
260 #else
261 #define	ATH_RX_RADIOTAP_PRESENT	ATH_RX_RADIOTAP_PRESENT_BASE
262 #endif	/* ATH_ENABLE_RADIOTAP_PRESENT */
263 
264 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
265 /*
266  * This is higher than the vendor bitmap used inside
267  * the Atheros reference codebase.
268  */
269 
270 /* Bit 8 */
271 #define	ATH_RADIOTAP_VENDOR_HEADER	8
272 
273 /*
274  * Using four chains makes all the fields in the
275  * per-chain info header be 4-byte aligned.
276  */
277 #define	ATH_RADIOTAP_MAX_CHAINS		4
278 
279 /*
280  * AR9380 and later chips are 3x3, which requires
281  * 5 EVM DWORDs in HT40 mode.
282  */
283 #define	ATH_RADIOTAP_MAX_EVM		5
284 
285 /*
286  * The vendor radiotap header data needs to be:
287  *
288  * + Aligned to a 4 byte address
289  * + .. so all internal fields are 4 bytes aligned;
290  * + .. and no 64 bit fields are allowed.
291  *
292  * So padding is required to ensure this is the case.
293  *
294  * Note that because of the lack of alignment with the
295  * vendor header (6 bytes), the first field must be
296  * two bytes so it can be accessed by alignment-strict
297  * platform (eg MIPS.)
298  */
299 struct ath_radiotap_vendor_hdr {		/* 30 bytes */
300 	uint8_t		vh_version;		/* 1 */
301 	uint8_t		vh_rx_chainmask;	/* 1 */
302 
303 	/* At this point it should be 4 byte aligned */
304 	uint32_t	evm[ATH_RADIOTAP_MAX_EVM];	/* 5 * 4 = 20 */
305 
306 	uint8_t		rssi_ctl[ATH_RADIOTAP_MAX_CHAINS];	/* 4 * 4 = 16 */
307 	uint8_t		rssi_ext[ATH_RADIOTAP_MAX_CHAINS];	/* 4 * 4 = 16 */
308 
309 	uint8_t		vh_phyerr_code;	/* Phy error code, or 0xff */
310 	uint8_t		vh_rs_status;	/* RX status */
311 	uint8_t		vh_rssi;	/* Raw RSSI */
312 	uint8_t		vh_flags;	/* General flags */
313 #define	ATH_VENDOR_PKT_RX	0x01
314 #define	ATH_VENDOR_PKT_TX	0x02
315 #define	ATH_VENDOR_PKT_RXPHYERR	0x04
316 #define	ATH_VENDOR_PKT_ISAGGR	0x08
317 #define	ATH_VENDOR_PKT_MOREAGGR	0x10
318 
319 	uint8_t		vh_rx_hwrate;	/* hardware RX ratecode */
320 	uint8_t		vh_rs_flags;	/* RX HAL flags */
321 	uint8_t		vh_pad[2];	/* pad to DWORD boundary */
322 } __packed;
323 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
324 
325 struct ath_rx_radiotap_header {
326 	struct ieee80211_radiotap_header wr_ihdr;
327 
328 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
329 	/* Vendor extension header bitmap */
330 	uint32_t	wr_ext_bitmap;          /* 4 */
331 
332 	/*
333 	 * This padding is needed because:
334 	 * + the radiotap header is 8 bytes;
335 	 * + the extension bitmap is 4 bytes;
336 	 * + the tsf is 8 bytes, so it must start on an 8 byte
337 	 *   boundary.
338 	 */
339 	uint32_t	wr_pad1;
340 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
341 
342 	/* Normal radiotap fields */
343 	u_int64_t	wr_tsf;
344 	u_int8_t	wr_flags;
345 	u_int8_t	wr_rate;
346 	int8_t		wr_antsignal;
347 	int8_t		wr_antnoise;
348 	u_int8_t	wr_antenna;
349 	u_int8_t	wr_pad[3];
350 	u_int32_t	wr_chan_flags;
351 	u_int16_t	wr_chan_freq;
352 	u_int8_t	wr_chan_ieee;
353 	int8_t		wr_chan_maxpow;
354 
355 #ifdef	ATH_ENABLE_RADIOTAP_VENDOR_EXT
356 	/*
357 	 * Vendor header section, as required by the
358 	 * presence of the vendor extension bit and bitmap
359 	 * entry.
360 	 *
361 	 * XXX This must be aligned to a 4 byte address?
362 	 * XXX or 8 byte address?
363 	 */
364 	struct ieee80211_radiotap_vendor_header wr_vh;  /* 6 bytes */
365 
366 	/*
367 	 * Because of the lack of alignment enforced by the above
368 	 * header, this vendor section won't be aligned in any
369 	 * useful way.  So, this will include a two-byte version
370 	 * value which will force the structure to be 4-byte aligned.
371 	 */
372 	struct ath_radiotap_vendor_hdr wr_v;
373 #endif	/* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
374 } __packed;
375 
376 #define ATH_TX_RADIOTAP_PRESENT (		\
377 	(1 << IEEE80211_RADIOTAP_FLAGS)		| \
378 	(1 << IEEE80211_RADIOTAP_RATE)		| \
379 	(1 << IEEE80211_RADIOTAP_DBM_TX_POWER)	| \
380 	(1 << IEEE80211_RADIOTAP_ANTENNA)	| \
381 	(1 << IEEE80211_RADIOTAP_XCHANNEL)	| \
382 	0)
383 
384 struct ath_tx_radiotap_header {
385 	struct ieee80211_radiotap_header wt_ihdr;
386 	u_int8_t	wt_flags;
387 	u_int8_t	wt_rate;
388 	u_int8_t	wt_txpower;
389 	u_int8_t	wt_antenna;
390 	u_int32_t	wt_chan_flags;
391 	u_int16_t	wt_chan_freq;
392 	u_int8_t	wt_chan_ieee;
393 	int8_t		wt_chan_maxpow;
394 } __packed;
395 
396 /*
397  * DFS ioctl commands
398  */
399 
400 #define	DFS_SET_THRESH		2
401 #define	DFS_GET_THRESH		3
402 #define	DFS_RADARDETECTS	6
403 
404 /*
405  * DFS ioctl parameter types
406  */
407 #define DFS_PARAM_FIRPWR	1
408 #define DFS_PARAM_RRSSI		2
409 #define DFS_PARAM_HEIGHT	3
410 #define DFS_PARAM_PRSSI		4
411 #define DFS_PARAM_INBAND	5
412 #define DFS_PARAM_NOL		6	/* XXX not used in FreeBSD */
413 #define DFS_PARAM_RELSTEP_EN	7
414 #define DFS_PARAM_RELSTEP	8
415 #define DFS_PARAM_RELPWR_EN	9
416 #define DFS_PARAM_RELPWR	10
417 #define DFS_PARAM_MAXLEN	11
418 #define DFS_PARAM_USEFIR128	12
419 #define DFS_PARAM_BLOCKRADAR	13
420 #define DFS_PARAM_MAXRSSI_EN	14
421 
422 /* FreeBSD-specific start at 32 */
423 #define	DFS_PARAM_ENABLE	32
424 #define	DFS_PARAM_EN_EXTCH	33
425 
426 /*
427  * Spectral ioctl parameter types
428  */
429 #define	SPECTRAL_PARAM_FFT_PERIOD	1
430 #define	SPECTRAL_PARAM_SS_PERIOD	2
431 #define	SPECTRAL_PARAM_SS_COUNT		3
432 #define	SPECTRAL_PARAM_SS_SHORT_RPT	4
433 #define	SPECTRAL_PARAM_ENABLED		5
434 #define	SPECTRAL_PARAM_ACTIVE		6
435 
436 /*
437  * Spectral control parameters
438  */
439 #define	SIOCGATHSPECTRAL	_IOWR('i', 151, struct ath_diag)
440 
441 #define	SPECTRAL_CONTROL_ENABLE		2
442 #define	SPECTRAL_CONTROL_DISABLE	3
443 #define	SPECTRAL_CONTROL_START		4
444 #define	SPECTRAL_CONTROL_STOP		5
445 #define	SPECTRAL_CONTROL_GET_PARAMS	6
446 #define	SPECTRAL_CONTROL_SET_PARAMS	7
447 #define	SPECTRAL_CONTROL_ENABLE_AT_RESET	8
448 #define	SPECTRAL_CONTROL_DISABLE_AT_RESET	9
449 
450 /*
451  * Bluetooth coexistence control parameters
452  */
453 #define	SIOCGATHBTCOEX		_IOWR('i', 152, struct ath_diag)
454 
455 #endif /* _DEV_ATH_ATHIOCTL_H */
456