1/* 2 * P1025 RDB Device Tree Source (32-bit address map) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35/include/ "p1021si-pre.dtsi" 36/ { 37 model = "fsl,P1025RDB"; 38 compatible = "fsl,P1025RDB"; 39 40 memory { 41 device_type = "memory"; 42 }; 43 44 lbc: localbus@ffe05000 { 45 reg = <0 0xffe05000 0 0x1000>; 46 47 /* NOR, NAND Flashes */ 48 ranges = <0x0 0x0 0x0 0xef000000 0x01000000 49 0x1 0x0 0x0 0xff800000 0x00040000>; 50 }; 51 52 soc: soc@ffe00000 { 53 ranges = <0x0 0x0 0xffe00000 0x100000>; 54 }; 55 56 pci0: pcie@ffe09000 { 57 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 58 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; 59 reg = <0 0xffe09000 0 0x1000>; 60 pcie@0 { 61 ranges = <0x2000000 0x0 0xe0000000 62 0x2000000 0x0 0xe0000000 63 0x0 0x20000000 64 65 0x1000000 0x0 0x0 66 0x1000000 0x0 0x0 67 0x0 0x100000>; 68 }; 69 }; 70 71 pci1: pcie@ffe0a000 { 72 reg = <0 0xffe0a000 0 0x1000>; 73 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 74 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; 75 pcie@0 { 76 ranges = <0x2000000 0x0 0xe0000000 77 0x2000000 0x0 0xe0000000 78 0x0 0x20000000 79 80 0x1000000 0x0 0x0 81 0x1000000 0x0 0x0 82 0x0 0x100000>; 83 }; 84 }; 85 86 qe: qe@ffe80000 { 87 ranges = <0x0 0x0 0xffe80000 0x40000>; 88 reg = <0 0xffe80000 0 0x480>; 89 brg-frequency = <0>; 90 bus-frequency = <0>; 91 status = "disabled"; /* no firmware loaded */ 92 93 enet3: ucc@2000 { 94 device_type = "network"; 95 compatible = "ucc_geth"; 96 rx-clock-name = "clk12"; 97 tx-clock-name = "clk9"; 98 pio-handle = <&pio1>; 99 phy-handle = <&qe_phy0>; 100 phy-connection-type = "mii"; 101 }; 102 103 mdio@2120 { 104 qe_phy0: ethernet-phy@0 { 105 interrupt-parent = <&mpic>; 106 interrupts = <4 1 0 0>; 107 reg = <0x6>; 108 }; 109 qe_phy1: ethernet-phy@3 { 110 interrupt-parent = <&mpic>; 111 interrupts = <5 1 0 0>; 112 reg = <0x3>; 113 }; 114 tbi-phy@11 { 115 reg = <0x11>; 116 device_type = "tbi-phy"; 117 }; 118 }; 119 120 enet4: ucc@2400 { 121 device_type = "network"; 122 compatible = "ucc_geth"; 123 rx-clock-name = "none"; 124 tx-clock-name = "clk13"; 125 pio-handle = <&pio2>; 126 phy-handle = <&qe_phy1>; 127 phy-connection-type = "rmii"; 128 }; 129 }; 130}; 131 132/include/ "p1025rdb.dtsi" 133/include/ "p1021si-post.dtsi" 134