1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2023, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8650.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#define PMK8550VE_SID 8 15#include "pm8550ve.dtsi" 16#include "pm8550vs.dtsi" 17#include "pmk8550.dtsi" 18#include "pmr735d_a.dtsi" 19 20/ { 21 model = "Qualcomm Technologies, Inc. SM8650 QRD"; 22 compatible = "qcom,sm8650-qrd", "qcom,sm8650"; 23 24 aliases { 25 serial0 = &uart15; 26 serial1 = &uart14; 27 }; 28 29 chosen { 30 stdout-path = "serial0:115200n8"; 31 }; 32 33 gpio-keys { 34 compatible = "gpio-keys"; 35 36 pinctrl-0 = <&volume_up_n>; 37 pinctrl-names = "default"; 38 39 key-volume-up { 40 label = "Volume Up"; 41 linux,code = <KEY_VOLUMEUP>; 42 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 43 debounce-interval = <15>; 44 linux,can-disable; 45 wakeup-source; 46 }; 47 }; 48 49 pmic-glink { 50 compatible = "qcom,sm8650-pmic-glink", 51 "qcom,sm8550-pmic-glink", 52 "qcom,pmic-glink"; 53 #address-cells = <1>; 54 #size-cells = <0>; 55 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; 56 57 connector@0 { 58 compatible = "usb-c-connector"; 59 reg = <0>; 60 61 power-role = "dual"; 62 data-role = "dual"; 63 64 ports { 65 #address-cells = <1>; 66 #size-cells = <0>; 67 68 port@0 { 69 reg = <0>; 70 71 pmic_glink_hs_in: endpoint { 72 remote-endpoint = <&usb_1_dwc3_hs>; 73 }; 74 }; 75 76 port@1 { 77 reg = <1>; 78 79 pmic_glink_ss_in: endpoint { 80 remote-endpoint = <&usb_1_dwc3_ss>; 81 }; 82 }; 83 }; 84 }; 85 }; 86 87 vph_pwr: vph-pwr-regulator { 88 compatible = "regulator-fixed"; 89 90 regulator-name = "vph_pwr"; 91 regulator-min-microvolt = <3700000>; 92 regulator-max-microvolt = <3700000>; 93 94 regulator-always-on; 95 regulator-boot-on; 96 }; 97}; 98 99&apps_rsc { 100 regulators-0 { 101 compatible = "qcom,pm8550-rpmh-regulators"; 102 103 vdd-bob1-supply = <&vph_pwr>; 104 vdd-bob2-supply = <&vph_pwr>; 105 vdd-l2-l13-l14-supply = <&vreg_bob1>; 106 vdd-l3-supply = <&vreg_s1c_1p2>; 107 vdd-l5-l16-supply = <&vreg_bob1>; 108 vdd-l6-l7-supply = <&vreg_bob1>; 109 vdd-l8-l9-supply = <&vreg_bob1>; 110 vdd-l11-supply = <&vreg_s1c_1p2>; 111 vdd-l12-supply = <&vreg_s6c_1p8>; 112 vdd-l15-supply = <&vreg_s6c_1p8>; 113 vdd-l17-supply = <&vreg_bob2>; 114 115 qcom,pmic-id = "b"; 116 117 vreg_bob1: bob1 { 118 regulator-name = "vreg_bob1"; 119 regulator-min-microvolt = <3296000>; 120 regulator-max-microvolt = <3960000>; 121 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 122 }; 123 124 vreg_bob2: bob2 { 125 regulator-name = "vreg_bob2"; 126 regulator-min-microvolt = <2720000>; 127 regulator-max-microvolt = <3008000>; 128 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 129 }; 130 131 vreg_l2b_3p0: ldo2 { 132 regulator-name = "vreg_l2b_3p0"; 133 regulator-min-microvolt = <3008000>; 134 regulator-max-microvolt = <3008000>; 135 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 136 regulator-allow-set-load; 137 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 138 RPMH_REGULATOR_MODE_HPM>; 139 }; 140 141 vreg_l5b_3p1: ldo5 { 142 regulator-name = "vreg_l5b_3p1"; 143 regulator-min-microvolt = <3104000>; 144 regulator-max-microvolt = <3104000>; 145 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 146 regulator-allow-set-load; 147 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 148 RPMH_REGULATOR_MODE_HPM>; 149 }; 150 151 vreg_l6b_1p8: ldo6 { 152 regulator-name = "vreg_l6b_1p8"; 153 regulator-min-microvolt = <1800000>; 154 regulator-max-microvolt = <3008000>; 155 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 156 regulator-allow-set-load; 157 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 158 RPMH_REGULATOR_MODE_HPM>; 159 }; 160 161 vreg_l7b_1p8: ldo7 { 162 regulator-name = "vreg_l7b_1p8"; 163 regulator-min-microvolt = <1800000>; 164 regulator-max-microvolt = <3008000>; 165 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 166 }; 167 168 vreg_l8b_1p8: ldo8 { 169 regulator-name = "vreg_l8b_1p8"; 170 regulator-min-microvolt = <1800000>; 171 regulator-max-microvolt = <3008000>; 172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 173 regulator-allow-set-load; 174 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 175 RPMH_REGULATOR_MODE_HPM>; 176 }; 177 178 vreg_l11b_1p2: ldo11 { 179 regulator-name = "vreg_l11b_1p2"; 180 regulator-min-microvolt = <1200000>; 181 regulator-max-microvolt = <1504000>; 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 183 regulator-allow-set-load; 184 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 185 RPMH_REGULATOR_MODE_HPM>; 186 }; 187 188 vreg_l12b_1p8: ldo12 { 189 regulator-name = "vreg_l12b_1p8"; 190 regulator-min-microvolt = <1800000>; 191 regulator-max-microvolt = <1800000>; 192 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 193 regulator-allow-set-load; 194 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 195 RPMH_REGULATOR_MODE_HPM>; 196 }; 197 198 vreg_l13b_3p0: ldo13 { 199 regulator-name = "vreg_l13b_3p0"; 200 regulator-min-microvolt = <3000000>; 201 regulator-max-microvolt = <3000000>; 202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 203 regulator-allow-set-load; 204 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 205 RPMH_REGULATOR_MODE_HPM>; 206 }; 207 208 vreg_l14b_3p2: ldo14 { 209 regulator-name = "vreg_l14b_3p2"; 210 regulator-min-microvolt = <3200000>; 211 regulator-max-microvolt = <3200000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 regulator-allow-set-load; 214 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 215 RPMH_REGULATOR_MODE_HPM>; 216 }; 217 218 vreg_l15b_1p8: ldo15 { 219 regulator-name = "vreg_l15b_1p8"; 220 regulator-min-microvolt = <1800000>; 221 regulator-max-microvolt = <1800000>; 222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 223 regulator-allow-set-load; 224 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 225 RPMH_REGULATOR_MODE_HPM>; 226 }; 227 228 vreg_l16b_2p8: ldo16 { 229 regulator-name = "vreg_l16b_2p8"; 230 regulator-min-microvolt = <2800000>; 231 regulator-max-microvolt = <2800000>; 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 233 regulator-allow-set-load; 234 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 235 RPMH_REGULATOR_MODE_HPM>; 236 }; 237 238 vreg_l17b_2p5: ldo17 { 239 regulator-name = "vreg_l17b_2p5"; 240 regulator-min-microvolt = <2504000>; 241 regulator-max-microvolt = <2504000>; 242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 243 regulator-allow-set-load; 244 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 245 RPMH_REGULATOR_MODE_HPM>; 246 }; 247 }; 248 249 regulators-1 { 250 compatible = "qcom,pm8550vs-rpmh-regulators"; 251 252 vdd-l1-supply = <&vreg_s1c_1p2>; 253 vdd-l2-supply = <&vreg_s1c_1p2>; 254 vdd-l3-supply = <&vreg_s1c_1p2>; 255 vdd-s1-supply = <&vph_pwr>; 256 vdd-s2-supply = <&vph_pwr>; 257 vdd-s3-supply = <&vph_pwr>; 258 vdd-s4-supply = <&vph_pwr>; 259 vdd-s5-supply = <&vph_pwr>; 260 vdd-s6-supply = <&vph_pwr>; 261 262 qcom,pmic-id = "c"; 263 264 vreg_s1c_1p2: smps1 { 265 regulator-name = "vreg_s1c_1p2"; 266 regulator-min-microvolt = <1256000>; 267 regulator-max-microvolt = <1348000>; 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 269 }; 270 271 vreg_s2c_0p8: smps2 { 272 regulator-name = "vreg_s2c_0p8"; 273 regulator-min-microvolt = <852000>; 274 regulator-max-microvolt = <1036000>; 275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 276 }; 277 278 vreg_s3c_0p9: smps3 { 279 regulator-name = "vreg_s3c_0p9"; 280 regulator-min-microvolt = <976000>; 281 regulator-max-microvolt = <1064000>; 282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 283 }; 284 285 vreg_s4c_1p2: smps4 { 286 regulator-name = "vreg_s4c_1p2"; 287 regulator-min-microvolt = <1224000>; 288 regulator-max-microvolt = <1280000>; 289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 290 }; 291 292 vreg_s5c_0p7: smps5 { 293 regulator-name = "vreg_s5c_0p7"; 294 regulator-min-microvolt = <752000>; 295 regulator-max-microvolt = <900000>; 296 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 297 }; 298 299 vreg_s6c_1p8: smps6 { 300 regulator-name = "vreg_s6c_1p8"; 301 regulator-min-microvolt = <1856000>; 302 regulator-max-microvolt = <2000000>; 303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 304 }; 305 306 vreg_l1c_1p2: ldo1 { 307 regulator-name = "vreg_l1c_1p2"; 308 regulator-min-microvolt = <1200000>; 309 regulator-max-microvolt = <1200000>; 310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 311 regulator-allow-set-load; 312 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 313 RPMH_REGULATOR_MODE_HPM>; 314 }; 315 316 vreg_l3c_1p2: ldo3 { 317 regulator-name = "vreg_l3c_1p2"; 318 regulator-min-microvolt = <1200000>; 319 regulator-max-microvolt = <1200000>; 320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 321 regulator-allow-set-load; 322 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 323 RPMH_REGULATOR_MODE_HPM>; 324 }; 325 }; 326 327 regulators-2 { 328 compatible = "qcom,pm8550vs-rpmh-regulators"; 329 330 vdd-l1-supply = <&vreg_s3c_0p9>; 331 332 qcom,pmic-id = "d"; 333 334 vreg_l1d_0p88: ldo1 { 335 regulator-name = "vreg_l1d_0p88"; 336 regulator-min-microvolt = <912000>; 337 regulator-max-microvolt = <920000>; 338 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 339 regulator-allow-set-load; 340 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 341 RPMH_REGULATOR_MODE_HPM>; 342 }; 343 }; 344 345 regulators-3 { 346 compatible = "qcom,pm8550vs-rpmh-regulators"; 347 348 vdd-l3-supply = <&vreg_s3c_0p9>; 349 350 qcom,pmic-id = "e"; 351 352 vreg_l3e_0p9: ldo3 { 353 regulator-name = "vreg_l3e_0p9"; 354 regulator-min-microvolt = <880000>; 355 regulator-max-microvolt = <920000>; 356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 357 regulator-allow-set-load; 358 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 359 RPMH_REGULATOR_MODE_HPM>; 360 }; 361 }; 362 363 regulators-4 { 364 compatible = "qcom,pm8550vs-rpmh-regulators"; 365 366 vdd-l1-supply = <&vreg_s3c_0p9>; 367 vdd-l3-supply = <&vreg_s3c_0p9>; 368 369 qcom,pmic-id = "g"; 370 371 vreg_l1g_0p91: ldo1 { 372 regulator-name = "vreg_l1g_0p91"; 373 regulator-min-microvolt = <912000>; 374 regulator-max-microvolt = <920000>; 375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 376 regulator-allow-set-load; 377 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 378 RPMH_REGULATOR_MODE_HPM>; 379 }; 380 381 vreg_l3g_0p91: ldo3 { 382 regulator-name = "vreg_l3g_0p91"; 383 regulator-min-microvolt = <880000>; 384 regulator-max-microvolt = <912000>; 385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 386 regulator-allow-set-load; 387 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 388 RPMH_REGULATOR_MODE_HPM>; 389 }; 390 }; 391 392 regulators-5 { 393 compatible = "qcom,pm8550ve-rpmh-regulators"; 394 395 vdd-l1-supply = <&vreg_s3c_0p9>; 396 vdd-l2-supply = <&vreg_s3c_0p9>; 397 vdd-l3-supply = <&vreg_s1c_1p2>; 398 vdd-s4-supply = <&vph_pwr>; 399 400 qcom,pmic-id = "i"; 401 402 vreg_s4i_0p85: smps4 { 403 regulator-name = "vreg_s4i_0p85"; 404 regulator-min-microvolt = <852000>; 405 regulator-max-microvolt = <1004000>; 406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 407 }; 408 409 vreg_l1i_0p88: ldo1 { 410 regulator-name = "vreg_l1i_0p88"; 411 regulator-min-microvolt = <880000>; 412 regulator-max-microvolt = <912000>; 413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 414 regulator-allow-set-load; 415 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 416 RPMH_REGULATOR_MODE_HPM>; 417 }; 418 419 vreg_l2i_0p88: ldo2 { 420 regulator-name = "vreg_l2i_0p88"; 421 regulator-min-microvolt = <880000>; 422 regulator-max-microvolt = <912000>; 423 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 424 regulator-allow-set-load; 425 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 426 RPMH_REGULATOR_MODE_HPM>; 427 }; 428 429 vreg_l3i_1p2: ldo3 { 430 regulator-name = "vreg_l3i_0p91"; 431 regulator-min-microvolt = <1200000>; 432 regulator-max-microvolt = <1200000>; 433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 434 regulator-allow-set-load; 435 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 436 RPMH_REGULATOR_MODE_HPM>; 437 }; 438 }; 439}; 440 441&dispcc { 442 status = "okay"; 443}; 444 445&gpi_dma1 { 446 status = "okay"; 447}; 448 449&ipa { 450 qcom,gsi-loader = "self"; 451 memory-region = <&ipa_fw_mem>; 452 firmware-name = "qcom/sm8650/ipa_fws.mbn"; 453 status = "okay"; 454}; 455 456&mdss { 457 status = "okay"; 458}; 459 460&mdss_dsi0 { 461 vdda-supply = <&vreg_l3i_1p2>; 462 463 status = "okay"; 464 465 panel@0 { 466 compatible = "visionox,vtdr6130"; 467 reg = <0>; 468 469 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 470 471 vddio-supply = <&vreg_l12b_1p8>; 472 vci-supply = <&vreg_l13b_3p0>; 473 vdd-supply = <&vreg_l11b_1p2>; 474 475 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; 476 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; 477 pinctrl-names = "default", "sleep"; 478 479 port { 480 panel0_in: endpoint { 481 remote-endpoint = <&mdss_dsi0_out>; 482 }; 483 }; 484 }; 485}; 486 487&mdss_dsi0_out { 488 remote-endpoint = <&panel0_in>; 489 data-lanes = <0 1 2 3>; 490}; 491 492&mdss_dsi0_phy { 493 vdds-supply = <&vreg_l1i_0p88>; 494 495 status = "okay"; 496}; 497 498&mdss_mdp { 499 status = "okay"; 500}; 501 502&pcie_1_phy_aux_clk { 503 clock-frequency = <1000>; 504}; 505 506&pcie0 { 507 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 508 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 509 510 pinctrl-0 = <&pcie0_default_state>; 511 pinctrl-names = "default"; 512 513 status = "okay"; 514}; 515 516&pcie0_phy { 517 vdda-phy-supply = <&vreg_l1i_0p88>; 518 vdda-pll-supply = <&vreg_l3i_1p2>; 519 520 status = "okay"; 521}; 522 523&pon_pwrkey { 524 status = "okay"; 525}; 526 527&pon_resin { 528 linux,code = <KEY_VOLUMEDOWN>; 529 530 status = "okay"; 531}; 532 533&pm8550_flash { 534 status = "okay"; 535 536 led-0 { 537 function = LED_FUNCTION_FLASH; 538 color = <LED_COLOR_ID_YELLOW>; 539 led-sources = <1>, <4>; 540 led-max-microamp = <500000>; 541 flash-max-microamp = <2000000>; 542 flash-max-timeout-us = <1280000>; 543 function-enumerator = <0>; 544 }; 545 546 led-1 { 547 function = LED_FUNCTION_FLASH; 548 color = <LED_COLOR_ID_WHITE>; 549 led-sources = <2>, <3>; 550 led-max-microamp = <500000>; 551 flash-max-microamp = <2000000>; 552 flash-max-timeout-us = <1280000>; 553 function-enumerator = <1>; 554 }; 555}; 556 557&pm8550_gpios { 558 volume_up_n: volume-up-n-state { 559 pins = "gpio6"; 560 function = "normal"; 561 bias-pull-up; 562 input-enable; 563 power-source = <1>; 564 }; 565}; 566 567&pm8550_pwm { 568 status = "okay"; 569 570 multi-led { 571 color = <LED_COLOR_ID_RGB>; 572 function = LED_FUNCTION_STATUS; 573 574 #address-cells = <1>; 575 #size-cells = <0>; 576 577 led@1 { 578 reg = <1>; 579 color = <LED_COLOR_ID_RED>; 580 }; 581 582 led@2 { 583 reg = <2>; 584 color = <LED_COLOR_ID_GREEN>; 585 }; 586 587 led@3 { 588 reg = <3>; 589 color = <LED_COLOR_ID_BLUE>; 590 }; 591 }; 592}; 593 594&pm8550b_eusb2_repeater { 595 vdd18-supply = <&vreg_l15b_1p8>; 596 vdd3-supply = <&vreg_l5b_3p1>; 597}; 598 599&pmk8550_rtc { 600 status = "okay"; 601}; 602 603&qupv3_id_0 { 604 status = "okay"; 605}; 606 607&qupv3_id_1 { 608 status = "okay"; 609}; 610 611&remoteproc_adsp { 612 firmware-name = "qcom/sm8650/adsp.mbn", 613 "qcom/sm8650/adsp_dtb.mbn"; 614 615 status = "okay"; 616}; 617 618&remoteproc_cdsp { 619 firmware-name = "qcom/sm8650/cdsp.mbn", 620 "qcom/sm8650/cdsp_dtb.mbn"; 621 622 status = "okay"; 623}; 624 625&remoteproc_mpss { 626 firmware-name = "qcom/sm8650/modem.mbn", 627 "qcom/sm8650/modem_dtb.mbn"; 628 629 status = "okay"; 630}; 631 632&sleep_clk { 633 clock-frequency = <32000>; 634}; 635 636&spi4 { 637 status = "okay"; 638 639 touchscreen@0 { 640 compatible = "goodix,gt9916"; 641 reg = <0>; 642 643 interrupt-parent = <&tlmm>; 644 interrupts = <162 IRQ_TYPE_LEVEL_LOW>; 645 646 reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; 647 648 avdd-supply = <&vreg_l14b_3p2>; 649 650 spi-max-frequency = <1000000>; 651 652 touchscreen-size-x = <1080>; 653 touchscreen-size-y = <2400>; 654 655 pinctrl-0 = <&ts_irq>, <&ts_reset>; 656 pinctrl-names = "default"; 657 }; 658}; 659 660&tlmm { 661 /* Reserved I/Os for NFC */ 662 gpio-reserved-ranges = <32 8>, <74 1>; 663 664 bt_default: bt-default-state { 665 bt-en-pins { 666 pins = "gpio17"; 667 function = "gpio"; 668 drive-strength = <16>; 669 bias-disable; 670 }; 671 672 sw-ctrl-pins { 673 pins = "gpio18"; 674 function = "gpio"; 675 bias-pull-down; 676 }; 677 }; 678 679 disp0_reset_n_active: disp0-reset-n-active-state { 680 pins = "gpio133"; 681 function = "gpio"; 682 drive-strength = <8>; 683 bias-disable; 684 }; 685 686 disp0_reset_n_suspend: disp0-reset-n-suspend-state { 687 pins = "gpio133"; 688 function = "gpio"; 689 drive-strength = <2>; 690 bias-pull-down; 691 }; 692 693 mdp_vsync_active: mdp-vsync-active-state { 694 pins = "gpio86"; 695 function = "mdp_vsync"; 696 drive-strength = <2>; 697 bias-pull-down; 698 }; 699 700 mdp_vsync_suspend: mdp-vsync-suspend-state { 701 pins = "gpio86"; 702 function = "mdp_vsync"; 703 drive-strength = <2>; 704 bias-pull-down; 705 }; 706 707 ts_irq: ts-irq-state { 708 pins = "gpio161"; 709 function = "gpio"; 710 drive-strength = <8>; 711 bias-pull-up; 712 output-disable; 713 }; 714 715 ts_reset: ts-reset-state { 716 pins = "gpio162"; 717 function = "gpio"; 718 drive-strength = <8>; 719 bias-pull-up; 720 }; 721}; 722 723&uart14 { 724 status = "okay"; 725 726 bluetooth { 727 compatible = "qcom,wcn7850-bt"; 728 729 clocks = <&rpmhcc RPMH_RF_CLK1>; 730 731 vddio-supply = <&vreg_l3c_1p2>; 732 vddaon-supply = <&vreg_l15b_1p8>; 733 vdddig-supply = <&vreg_s3c_0p9>; 734 vddrfa0p8-supply = <&vreg_s3c_0p9>; 735 vddrfa1p2-supply = <&vreg_s1c_1p2>; 736 vddrfa1p9-supply = <&vreg_s6c_1p8>; 737 738 max-speed = <3200000>; 739 740 enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; 741 swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; 742 743 pinctrl-0 = <&bt_default>; 744 pinctrl-names = "default"; 745 }; 746}; 747 748&uart15 { 749 status = "okay"; 750}; 751 752&ufs_mem_hc { 753 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 754 755 vcc-supply = <&vreg_l17b_2p5>; 756 vcc-max-microamp = <1300000>; 757 vccq-supply = <&vreg_l1c_1p2>; 758 vccq-max-microamp = <1200000>; 759 760 status = "okay"; 761}; 762 763&ufs_mem_phy { 764 vdda-phy-supply = <&vreg_l1d_0p88>; 765 vdda-pll-supply = <&vreg_l3i_1p2>; 766 767 status = "okay"; 768}; 769 770/* 771 * DPAUX -> WCD9395 -> USB_SBU -> USB-C 772 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C 773 * USB SS -> NB7VPQ904MMUTWG -> USB-C 774 */ 775 776&usb_1 { 777 status = "okay"; 778}; 779 780&usb_1_dwc3 { 781 dr_mode = "otg"; 782 usb-role-switch; 783}; 784 785&usb_1_dwc3_hs { 786 remote-endpoint = <&pmic_glink_hs_in>; 787}; 788 789&usb_1_dwc3_ss { 790 remote-endpoint = <&pmic_glink_ss_in>; 791}; 792 793&usb_1_hsphy { 794 vdd-supply = <&vreg_l1i_0p88>; 795 vdda12-supply = <&vreg_l3i_1p2>; 796 797 phys = <&pm8550b_eusb2_repeater>; 798 799 status = "okay"; 800}; 801 802&usb_dp_qmpphy { 803 vdda-phy-supply = <&vreg_l3i_1p2>; 804 vdda-pll-supply = <&vreg_l3g_0p91>; 805 806 status = "okay"; 807}; 808 809&xo_board { 810 clock-frequency = <76800000>; 811}; 812