1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 6#include "sm8250.dtsi" 7#include "pm8150.dtsi" 8 9/ { 10 chosen { 11 #address-cells = <2>; 12 #size-cells = <2>; 13 ranges; 14 15 framebuffer: framebuffer@9c000000 { 16 compatible = "simple-framebuffer"; 17 reg = <0x0 0x9c000000 0x0 0x2300000>; 18 width = <1080>; 19 height = <2400>; 20 stride = <(1080 * 4)>; 21 format = "a8r8g8b8"; 22 }; 23 }; 24 25 gpio_keys: gpio-keys { 26 compatible = "gpio-keys"; 27 28 pinctrl-names = "default"; 29 pinctrl-0 = <&vol_up_n>; 30 31 key-vol-up { 32 label = "Volume Up"; 33 gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>; 34 linux,code = <KEY_VOLUMEUP>; 35 debounce-interval = <15>; 36 linux,can-disable; 37 wakeup-source; 38 }; 39 }; 40 41 reserved-memory { 42 cont_splash_mem: memory@9c000000 { 43 reg = <0x0 0x9c000000 0x0 0x2300000>; 44 no-map; 45 }; 46 47 ramoops@9fa00000 { 48 compatible = "ramoops"; 49 reg = <0x0 0x9fa00000 0x0 0x100000>; 50 record-size = <0x4000>; 51 console-size = <0x40000>; 52 ftrace-size = <0x40000>; 53 pmsg-size = <0x40000>; 54 no-map; 55 }; 56 }; 57 58 vph_pwr: vph-pwr-regulator { 59 compatible = "regulator-fixed"; 60 regulator-name = "vph_pwr"; 61 regulator-min-microvolt = <3700000>; 62 regulator-max-microvolt = <3700000>; 63 }; 64}; 65 66&apps_rsc { 67 regulators-0 { 68 compatible = "qcom,pm8150-rpmh-regulators"; 69 qcom,pmic-id = "a"; 70 71 vdd-s1-supply = <&vph_pwr>; 72 vdd-s2-supply = <&vph_pwr>; 73 vdd-s3-supply = <&vph_pwr>; 74 vdd-s4-supply = <&vph_pwr>; 75 vdd-s5-supply = <&vph_pwr>; 76 vdd-s6-supply = <&vph_pwr>; 77 vdd-s7-supply = <&vph_pwr>; 78 vdd-s8-supply = <&vph_pwr>; 79 vdd-s9-supply = <&vph_pwr>; 80 vdd-s10-supply = <&vph_pwr>; 81 82 vreg_s4a_1p8: smps4 { 83 regulator-name = "vreg_s4a_1p8"; 84 regulator-min-microvolt = <1800000>; 85 regulator-max-microvolt = <1920000>; 86 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 87 regulator-allow-set-load; 88 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 89 RPMH_REGULATOR_MODE_HPM>; 90 }; 91 92 vreg_l2a_3p1: ldo2 { 93 regulator-name = "vreg_l2a_3p1"; 94 regulator-min-microvolt = <3072000>; 95 regulator-max-microvolt = <3072000>; 96 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 97 }; 98 99 vreg_l5a_0p88: ldo5 { 100 regulator-name = "vreg_l5a_0p88"; 101 regulator-min-microvolt = <880000>; 102 regulator-max-microvolt = <880000>; 103 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 104 }; 105 106 vreg_l6a_1p2: ldo6 { 107 regulator-name = "vreg_l6a_1p2"; 108 regulator-min-microvolt = <1200000>; 109 regulator-max-microvolt = <1200000>; 110 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 111 regulator-allow-set-load; 112 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 113 RPMH_REGULATOR_MODE_HPM>; 114 }; 115 116 vreg_l9a_1p2: ldo9 { 117 regulator-name = "vreg_l9a_1p2"; 118 regulator-min-microvolt = <1200000>; 119 regulator-max-microvolt = <1200000>; 120 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 121 }; 122 123 vreg_l12a_1p8: ldo12 { 124 regulator-name = "vreg_l12a_1p8"; 125 regulator-min-microvolt = <1800000>; 126 regulator-max-microvolt = <1800000>; 127 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 128 }; 129 130 vreg_l17a_3p0: ldo17 { 131 regulator-name = "vreg_l17a_3p0"; 132 regulator-min-microvolt = <2496000>; 133 regulator-max-microvolt = <3008000>; 134 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 135 regulator-allow-set-load; 136 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 137 RPMH_REGULATOR_MODE_HPM>; 138 }; 139 }; 140}; 141 142&pm8150_gpios { 143 vol_up_n: vol-up-n-state { 144 pins = "gpio3"; 145 function = "normal"; 146 power-source = <0>; 147 input-enable; 148 bias-pull-up; 149 }; 150}; 151 152&pon_pwrkey { 153 status = "okay"; 154}; 155 156&pon_resin { 157 linux,code = <KEY_VOLUMEDOWN>; 158 status = "okay"; 159}; 160 161&tlmm { 162 gpio-reserved-ranges = <20 4>, /* SPI (fingerprint scanner) */ 163 <40 4>; /* Unused */ 164}; 165 166&usb_1 { 167 /* Limit to USB 2.0 for now */ 168 qcom,select-utmi-as-pipe-clk; 169 170 status = "okay"; 171}; 172 173&usb_1_dwc3 { 174 dr_mode = "peripheral"; 175 maximum-speed = "high-speed"; 176 /* Remove USB3 phy */ 177 phys = <&usb_1_hsphy>; 178 phy-names = "usb2-phy"; 179}; 180 181&usb_1_hsphy { 182 vdda-pll-supply = <&vreg_l5a_0p88>; 183 vdda18-supply = <&vreg_l12a_1p8>; 184 vdda33-supply = <&vreg_l2a_3p1>; 185 186 status = "okay"; 187}; 188 189&ufs_mem_hc { 190 vcc-supply = <&vreg_l17a_3p0>; 191 vcc-max-microamp = <800000>; 192 vccq-supply = <&vreg_l6a_1p2>; 193 vccq-max-microamp = <800000>; 194 vccq2-supply = <&vreg_s4a_1p8>; 195 vccq2-max-microamp = <800000>; 196 197 status = "okay"; 198}; 199 200&ufs_mem_phy { 201 vdda-phy-supply = <&vreg_l5a_0p88>; 202 vdda-pll-supply = <&vreg_l9a_1p2>; 203 204 status = "okay"; 205}; 206