1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright 2019~2020, 2022 NXP 4 */ 5 6/delete-node/ &enet1_lpcg; 7/delete-node/ &fec2; 8 9/ { 10 conn_enet0_root_clk: clock-conn-enet0-root { 11 compatible = "fixed-clock"; 12 #clock-cells = <0>; 13 clock-frequency = <250000000>; 14 clock-output-names = "conn_enet0_root_clk"; 15 }; 16 17 clk_dummy: clock-dummy { 18 compatible = "fixed-clock"; 19 #clock-cells = <0>; 20 clock-frequency = <0>; 21 clock-output-names = "clk_dummy"; 22 }; 23}; 24 25&conn_subsys { 26 eqos: ethernet@5b050000 { 27 compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; 28 reg = <0x5b050000 0x10000>; 29 interrupt-parent = <&gic>; 30 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, 31 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; 32 interrupt-names = "macirq", "eth_wake_irq"; 33 clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, 34 <&eqos_lpcg IMX_LPCG_CLK_6>, 35 <&eqos_lpcg IMX_LPCG_CLK_0>, 36 <&eqos_lpcg IMX_LPCG_CLK_5>, 37 <&eqos_lpcg IMX_LPCG_CLK_2>; 38 clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; 39 assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>; 40 assigned-clock-rates = <125000000>; 41 power-domains = <&pd IMX_SC_R_ENET_1>; 42 status = "disabled"; 43 }; 44 45 usbotg2: usb@5b0e0000 { 46 compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; 47 reg = <0x5b0e0000 0x200>; 48 interrupt-parent = <&gic>; 49 interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; 50 fsl,usbphy = <&usbphy2>; 51 fsl,usbmisc = <&usbmisc2 0>; 52 /* 53 * usbotg1 and usbotg2 share one clcok. 54 * scu firmware disables the access to the clock and keeps 55 * it always on in case other core (M4) uses one of these. 56 */ 57 clocks = <&clk_dummy>; 58 ahb-burst-config = <0x0>; 59 tx-burst-size-dword = <0x10>; 60 rx-burst-size-dword = <0x10>; 61 power-domains = <&pd IMX_SC_R_USB_1>; 62 status = "disabled"; 63 }; 64 65 usbmisc2: usbmisc@5b0e0200 { 66 #index-cells = <1>; 67 compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; 68 reg = <0x5b0e0200 0x200>; 69 }; 70 71 usbphy2: usbphy@5b110000 { 72 compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy"; 73 reg = <0x5b110000 0x1000>; 74 clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>; 75 power-domains = <&pd IMX_SC_R_USB_1_PHY>; 76 status = "disabled"; 77 }; 78 79 eqos_lpcg: clock-controller@5b240000 { 80 compatible = "fsl,imx8qxp-lpcg"; 81 reg = <0x5b240000 0x10000>; 82 #clock-cells = <1>; 83 clocks = <&conn_enet0_root_clk>, 84 <&conn_axi_clk>, 85 <&conn_axi_clk>, 86 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, 87 <&conn_ipg_clk>; 88 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>, 89 <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, 90 <IMX_LPCG_CLK_6>; 91 clock-output-names = "eqos_ptp", 92 "eqos_mem_clk", 93 "eqos_aclk", 94 "eqos_clk", 95 "eqos_csr_clk"; 96 power-domains = <&pd IMX_SC_R_ENET_1>; 97 }; 98 99 usb2_2_lpcg: clock-controller@5b280000 { 100 compatible = "fsl,imx8qxp-lpcg"; 101 reg = <0x5b280000 0x10000>; 102 #clock-cells = <1>; 103 clock-indices = <IMX_LPCG_CLK_7>; 104 clocks = <&conn_ipg_clk>; 105 clock-output-names = "usboh3_2_phy_ipg_clk"; 106 power-domains = <&pd IMX_SC_R_USB_1_PHY>; 107 }; 108 109}; 110 111&enet0_lpcg { 112 clocks = <&conn_enet0_root_clk>, 113 <&conn_enet0_root_clk>, 114 <&conn_axi_clk>, 115 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, 116 <&conn_ipg_clk>, 117 <&conn_ipg_clk>; 118}; 119 120&fec1 { 121 compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec"; 122 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, 123 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 124 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 125 <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; 126 assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; 127 assigned-clock-rates = <125000000>; 128}; 129 130&usdhc1 { 131 compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; 132 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 133}; 134 135&usdhc2 { 136 compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; 137 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 138}; 139 140&usdhc3 { 141 compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; 142 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 143}; 144 145&usbotg1 { 146 interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; 147 /* 148 * usbotg1 and usbotg2 share one clock 149 * scfw disable clock access and keep it always on 150 * in case other core (M4) use one of these. 151 */ 152 clocks = <&clk_dummy>; 153}; 154