1// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) 2/* 3 *Copyright(c) 2018 Broadcom 4 */ 5 usb { 6 compatible = "simple-bus"; 7 #address-cells = <2>; 8 #size-cells = <2>; 9 ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>; 10 11 /* 12 * Internally, USB bus to the interconnect can only address up 13 * to 40-bit 14 */ 15 dma-ranges = <0 0 0 0 0x100 0x0>; 16 17 usbphy0: usb-phy@0 { 18 compatible = "brcm,sr-usb-combo-phy"; 19 reg = <0x0 0x00000000 0x0 0x100>; 20 #phy-cells = <1>; 21 status = "disabled"; 22 }; 23 24 xhci0: usb@1000 { 25 compatible = "generic-xhci"; 26 reg = <0x0 0x00001000 0x0 0x1000>; 27 interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; 28 phys = <&usbphy0 1>, <&usbphy0 0>; 29 phy-names = "phy0", "phy1"; 30 dma-coherent; 31 status = "disabled"; 32 }; 33 34 bdc0: usb@2000 { 35 compatible = "brcm,bdc-v0.16"; 36 reg = <0x0 0x00002000 0x0 0x1000>; 37 interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; 38 phys = <&usbphy0 0>, <&usbphy0 1>; 39 phy-names = "phy0", "phy1"; 40 dma-coherent; 41 status = "disabled"; 42 }; 43 44 usbphy1: usb-phy@10000 { 45 compatible = "brcm,sr-usb-combo-phy"; 46 reg = <0x0 0x00010000 0x0 0x100>; 47 #phy-cells = <1>; 48 status = "disabled"; 49 }; 50 51 usbphy2: usb-phy@20000 { 52 compatible = "brcm,sr-usb-hs-phy"; 53 reg = <0x0 0x00020000 0x0 0x100>; 54 #phy-cells = <0>; 55 status = "disabled"; 56 }; 57 58 xhci1: usb@11000 { 59 compatible = "generic-xhci"; 60 reg = <0x0 0x00011000 0x0 0x1000>; 61 interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; 62 phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; 63 phy-names = "phy0", "phy1", "phy2"; 64 dma-coherent; 65 status = "disabled"; 66 }; 67 68 bdc1: usb@21000 { 69 compatible = "brcm,bdc-v0.16"; 70 reg = <0x0 0x00021000 0x0 0x1000>; 71 interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; 72 phys = <&usbphy2>; 73 phy-names = "phy0"; 74 dma-coherent; 75 status = "disabled"; 76 }; 77 }; 78