1// SPDX-License-Identifier: GPL-2.0 OR MIT 2// 3// Copyright (C) 2023 chargebyte GmbH 4 5#include "imx6ull-tarragon-common.dtsi" 6 7/ { 8 model = "chargebyte Tarragon Master"; 9 compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull"; 10 11 fan0: pwm-fan { 12 compatible = "pwm-fan"; 13 pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&pinctrl_fan_sense_snvs>; 16 fan-supply = <®_fan>; 17 interrupt-parent = <&gpio5>; 18 interrupts = <1 IRQ_TYPE_EDGE_FALLING>; 19 }; 20 21 reg_fan: regulator { 22 compatible = "regulator-fixed"; 23 regulator-name = "fan-supply"; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&pinctrl_fan_enable>; 26 regulator-min-microvolt = <12000000>; 27 regulator-max-microvolt = <12000000>; 28 gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; 29 enable-active-high; 30 regulator-boot-on; 31 }; 32}; 33 34&ecspi2 { 35 status = "okay"; 36 37 qca700x_cp: ethernet@0 { 38 reg = <0x0>; 39 compatible = "qca,qca7000"; 40 pinctrl-names = "default"; 41 pinctrl-0 = <&pinctrl_qca700x_cp_int 42 &pinctrl_qca700x_cp_rst 43 &pinctrl_qca700x_cp_btld>; 44 interrupt-parent = <&gpio2>; 45 interrupts = <19 IRQ_TYPE_EDGE_RISING>; 46 spi-cpha; 47 spi-cpol; 48 spi-max-frequency = <16000000>; 49 }; 50}; 51 52&ecspi4 { 53 status = "okay"; 54 55 qca700x_mains: ethernet@0 { 56 reg = <0x0>; 57 compatible = "qca,qca7000"; 58 pinctrl-names = "default"; 59 pinctrl-0 = <&pinctrl_qca700x_mains_int 60 &pinctrl_qca700x_mains_rst 61 &pinctrl_qca700x_mains_btld>; 62 interrupt-parent = <&gpio5>; 63 interrupts = <9 IRQ_TYPE_EDGE_RISING>; 64 spi-cpha; 65 spi-cpol; 66 spi-max-frequency = <16000000>; 67 }; 68}; 69 70&fec1 { 71 status = "okay"; 72}; 73 74&pwm7 { 75 pinctrl-names = "default"; 76 pinctrl-0 = <&pinctrl_pwm_fan>; 77 status = "okay"; 78}; 79 80&uart5 { 81 status = "okay"; 82}; 83