1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> 4 */ 5 6#include "imx27-eukrea-cpuimx27.dtsi" 7 8/ { 9 model = "Eukrea MBIMXSD27"; 10 compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27"; 11 12 display0: CMO-QVGA { 13 model = "CMO-QVGA"; 14 bits-per-pixel = <16>; 15 fsl,pcr = <0xfad08b80>; 16 17 display-timings { 18 native-mode = <&timing0>; 19 timing0: timing0 { 20 clock-frequency = <6500000>; 21 hactive = <320>; 22 vactive = <240>; 23 hback-porch = <20>; 24 hsync-len = <30>; 25 hfront-porch = <38>; 26 vback-porch = <4>; 27 vsync-len = <3>; 28 vfront-porch = <15>; 29 }; 30 }; 31 }; 32 33 backlight { 34 compatible = "gpio-backlight"; 35 pinctrl-names = "default"; 36 pinctrl-0 = <&pinctrl_backlight>; 37 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; 38 }; 39 40 leds { 41 compatible = "gpio-leds"; 42 pinctrl-names = "default"; 43 pinctrl-0 = <&pinctrl_gpioleds>; 44 45 led1 { 46 label = "system::live"; 47 gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; 48 linux,default-trigger = "heartbeat"; 49 }; 50 51 led2 { 52 label = "system::user"; 53 gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; 54 }; 55 }; 56 57 reg_lcd: regulator-0 { 58 compatible = "regulator-fixed"; 59 pinctrl-names = "default"; 60 pinctrl-0 = <&pinctrl_lcdreg>; 61 regulator-name = "LCD"; 62 regulator-min-microvolt = <5000000>; 63 regulator-max-microvolt = <5000000>; 64 gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; 65 enable-active-high; 66 }; 67}; 68 69&cspi1 { 70 pinctrl-0 = <&pinctrl_cspi1>; 71 cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; 72 status = "okay"; 73 74 ads7846@0 { 75 compatible = "ti,ads7846"; 76 pinctrl-names = "default"; 77 pinctrl-0 = <&pinctrl_touch>; 78 reg = <0>; 79 interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; 80 spi-cpol; 81 spi-max-frequency = <1500000>; 82 ti,keep-vref-on; 83 }; 84}; 85 86&fb { 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_imxfb>; 89 display = <&display0>; 90 lcd-supply = <®_lcd>; 91 fsl,dmacr = <0x00040060>; 92 fsl,lscr1 = <0x00120300>; 93 fsl,lpccr = <0x00a903ff>; 94 status = "okay"; 95}; 96 97&i2c1 { 98 codec: codec@1a { 99 compatible = "ti,tlv320aic23"; 100 reg = <0x1a>; 101 }; 102}; 103 104&kpp { 105 linux,keymap = < 106 MATRIX_KEY(0, 0, KEY_UP) 107 MATRIX_KEY(0, 1, KEY_DOWN) 108 MATRIX_KEY(1, 0, KEY_RIGHT) 109 MATRIX_KEY(1, 1, KEY_LEFT) 110 >; 111 status = "okay"; 112}; 113 114&sdhci1 { 115 pinctrl-names = "default"; 116 pinctrl-0 = <&pinctrl_sdhc1>; 117 bus-width = <4>; 118 status = "okay"; 119}; 120 121&ssi1 { 122 pinctrl-names = "default"; 123 pinctrl-0 = <&pinctrl_ssi1>; 124 codec-handle = <&codec>; 125 status = "okay"; 126}; 127 128&uart1 { 129 uart-has-rtscts; 130 pinctrl-names = "default"; 131 pinctrl-0 = <&pinctrl_uart1>; 132 status = "okay"; 133}; 134 135&uart2 { 136 uart-has-rtscts; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_uart2>; 139 status = "okay"; 140}; 141 142&uart3 { 143 uart-has-rtscts; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&pinctrl_uart3>; 146 status = "okay"; 147}; 148 149&iomuxc { 150 imx27-eukrea-cpuimx27-baseboard { 151 pinctrl_cspi1: cspi1grp { 152 fsl,pins = < 153 MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 154 MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 155 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 156 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ 157 >; 158 }; 159 160 pinctrl_backlight: backlightgrp { 161 fsl,pins = < 162 MX27_PAD_PWMO__GPIO5_5 0x0 163 >; 164 }; 165 166 pinctrl_gpioleds: gpioledsgrp { 167 fsl,pins = < 168 MX27_PAD_PC_PWRON__GPIO6_16 0x0 169 MX27_PAD_PC_CD2_B__GPIO6_19 0x0 170 >; 171 }; 172 173 pinctrl_imxfb: imxfbgrp { 174 fsl,pins = < 175 MX27_PAD_LD0__LD0 0x0 176 MX27_PAD_LD1__LD1 0x0 177 MX27_PAD_LD2__LD2 0x0 178 MX27_PAD_LD3__LD3 0x0 179 MX27_PAD_LD4__LD4 0x0 180 MX27_PAD_LD5__LD5 0x0 181 MX27_PAD_LD6__LD6 0x0 182 MX27_PAD_LD7__LD7 0x0 183 MX27_PAD_LD8__LD8 0x0 184 MX27_PAD_LD9__LD9 0x0 185 MX27_PAD_LD10__LD10 0x0 186 MX27_PAD_LD11__LD11 0x0 187 MX27_PAD_LD12__LD12 0x0 188 MX27_PAD_LD13__LD13 0x0 189 MX27_PAD_LD14__LD14 0x0 190 MX27_PAD_LD15__LD15 0x0 191 MX27_PAD_LD16__LD16 0x0 192 MX27_PAD_LD17__LD17 0x0 193 MX27_PAD_CONTRAST__CONTRAST 0x0 194 MX27_PAD_OE_ACD__OE_ACD 0x0 195 MX27_PAD_HSYNC__HSYNC 0x0 196 MX27_PAD_VSYNC__VSYNC 0x0 197 >; 198 }; 199 200 pinctrl_lcdreg: lcdreggrp { 201 fsl,pins = < 202 MX27_PAD_CLS__GPIO1_25 0x0 203 >; 204 }; 205 206 pinctrl_sdhc1: sdhc1grp { 207 fsl,pins = < 208 MX27_PAD_SD1_CLK__SD1_CLK 0x0 209 MX27_PAD_SD1_CMD__SD1_CMD 0x0 210 MX27_PAD_SD1_D0__SD1_D0 0x0 211 MX27_PAD_SD1_D1__SD1_D1 0x0 212 MX27_PAD_SD1_D2__SD1_D2 0x0 213 MX27_PAD_SD1_D3__SD1_D3 0x0 214 >; 215 }; 216 217 pinctrl_ssi1: ssi1grp { 218 fsl,pins = < 219 MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 220 MX27_PAD_SSI4_FS__SSI4_FS 0x0 221 MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 222 MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 223 >; 224 }; 225 226 pinctrl_touch: touchgrp { 227 fsl,pins = < 228 MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ 229 >; 230 }; 231 232 pinctrl_uart1: uart1grp { 233 fsl,pins = < 234 MX27_PAD_UART1_TXD__UART1_TXD 0x0 235 MX27_PAD_UART1_RXD__UART1_RXD 0x0 236 MX27_PAD_UART1_CTS__UART1_CTS 0x0 237 MX27_PAD_UART1_RTS__UART1_RTS 0x0 238 >; 239 }; 240 241 pinctrl_uart2: uart2grp { 242 fsl,pins = < 243 MX27_PAD_UART2_TXD__UART2_TXD 0x0 244 MX27_PAD_UART2_RXD__UART2_RXD 0x0 245 MX27_PAD_UART2_CTS__UART2_CTS 0x0 246 MX27_PAD_UART2_RTS__UART2_RTS 0x0 247 >; 248 }; 249 250 pinctrl_uart3: uart3grp { 251 fsl,pins = < 252 MX27_PAD_UART3_TXD__UART3_TXD 0x0 253 MX27_PAD_UART3_RXD__UART3_RXD 0x0 254 MX27_PAD_UART3_CTS__UART3_CTS 0x0 255 MX27_PAD_UART3_RTS__UART3_RTS 0x0 256 >; 257 }; 258 }; 259}; 260