1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm PMIC GLINK firmware interface for battery management, USB 8 Type-C and other things. 9 10maintainers: 11 - Bjorn Andersson <andersson@kernel.org> 12 13description: 14 The PMIC GLINK service, running on a coprocessor on some modern Qualcomm 15 platforms and implement USB Type-C handling and battery management. This 16 binding describes the component in the OS used to communicate with the 17 firmware and connect it's resources to those described in the Devicetree, 18 particularly the USB Type-C controllers relationship with USB and DisplayPort 19 components. 20 21properties: 22 compatible: 23 oneOf: 24 - items: 25 - enum: 26 - qcom,sc8180x-pmic-glink 27 - qcom,sc8280xp-pmic-glink 28 - qcom,sm8350-pmic-glink 29 - qcom,sm8450-pmic-glink 30 - qcom,sm8550-pmic-glink 31 - const: qcom,pmic-glink 32 - items: 33 - enum: 34 - qcom,sm8650-pmic-glink 35 - const: qcom,sm8550-pmic-glink 36 - const: qcom,pmic-glink 37 38 '#address-cells': 39 const: 1 40 41 '#size-cells': 42 const: 0 43 44 orientation-gpios: 45 description: Array of input gpios for the Type-C connector orientation indication. 46 The GPIO indication is used to detect the orientation of the Type-C connector. 47 The array should contain a gpio entry for each PMIC Glink connector, in reg order. 48 It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation. 49 50patternProperties: 51 '^connector@\d$': 52 $ref: /schemas/connector/usb-connector.yaml# 53 required: 54 - reg 55 56required: 57 - compatible 58 59allOf: 60 - if: 61 not: 62 properties: 63 compatible: 64 contains: 65 enum: 66 - qcom,sm8450-pmic-glink 67 - qcom,sm8550-pmic-glink 68 then: 69 properties: 70 orientation-gpios: false 71 72additionalProperties: false 73 74examples: 75 - |+ 76 pmic-glink { 77 compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; 78 79 #address-cells = <1>; 80 #size-cells = <0>; 81 82 connector@0 { 83 compatible = "usb-c-connector"; 84 reg = <0>; 85 power-role = "dual"; 86 data-role = "dual"; 87 88 ports { 89 #address-cells = <1>; 90 #size-cells = <0>; 91 92 port@0 { 93 reg = <0>; 94 endpoint { 95 remote-endpoint = <&usb_role>; 96 }; 97 }; 98 99 port@1 { 100 reg = <1>; 101 endpoint { 102 remote-endpoint = <&ss_phy_out>; 103 }; 104 }; 105 106 port@2 { 107 reg = <2>; 108 endpoint { 109 remote-endpoint = <&sbu_mux>; 110 }; 111 }; 112 }; 113 }; 114 }; 115... 116 117