xref: /freebsd/sys/contrib/device-tree/Bindings/display/msm/dpu-msm8998.yaml (revision c9ccf3a32da427475985b85d7df023ccfb138c27)

# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Display DPU dt properties for MSM8998 target

maintainers:
  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

description: |
  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
  bindings of MDSS and DPU are mentioned for MSM8998 target.

properties:
  compatible:
    items:
      - const: qcom,msm8998-mdss

  reg:
    maxItems: 1

  reg-names:
    const: mdss

  power-domains:
    maxItems: 1

  clocks:
    items:
      - description: Display AHB clock
      - description: Display AXI clock
      - description: Display core clock

  clock-names:
    items:
      - const: iface
      - const: bus
      - const: core

  interrupts:
    maxItems: 1

  interrupt-controller: true

  "#address-cells": true

  "#size-cells": true

  "#interrupt-cells":
    const: 1

  iommus:
    items:
      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0

  ranges: true

patternProperties:
  "^display-controller@[0-9a-f]+$":
    type: object
    description: Node containing the properties of DPU.

    properties:
      compatible:
        items:
          - const: qcom,msm8998-dpu

      reg:
        items:
          - description: Address offset and size for mdp register set
          - description: Address offset and size for regdma register set
          - description: Address offset and size for vbif register set
          - description: Address offset and size for non-realtime vbif register set

      reg-names:
        items:
          - const: mdp
          - const: regdma
          - const: vbif
          - const: vbif_nrt

      clocks:
        items:
          - description: Display ahb clock
          - description: Display axi clock
          - description: Display mem-noc clock
          - description: Display core clock
          - description: Display vsync clock

      clock-names:
        items:
          - const: iface
          - const: bus
          - const: mnoc
          - const: core
          - const: vsync

      interrupts:
        maxItems: 1

      power-domains:
        maxItems: 1

      operating-points-v2: true
      ports:
        $ref: /schemas/graph.yaml#/properties/ports
        description: |
          Contains the list of output ports from DPU device. These ports
          connect to interfaces that are external to the DPU hardware,
          such as DSI, DP etc. Each output port contains an endpoint that
          describes how it is connected to an external interface.

        properties:
          port@0:
            $ref: /schemas/graph.yaml#/properties/port
            description: DPU_INTF1 (DSI1)

          port@1:
            $ref: /schemas/graph.yaml#/properties/port
            description: DPU_INTF2 (DSI2)

        required:
          - port@0
          - port@1

    required:
      - compatible
      - reg
      - reg-names
      - clocks
      - interrupts
      - power-domains
      - operating-points-v2
      - ports

required:
  - compatible
  - reg
  - reg-names
  - power-domains
  - clocks
  - interrupts
  - interrupt-controller
  - iommus
  - ranges

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/qcom-rpmpd.h>

    mdss: display-subsystem@c900000 {
        compatible = "qcom,msm8998-mdss";
        reg = <0x0c900000 0x1000>;
        reg-names = "mdss";

        clocks = <&mmcc MDSS_AHB_CLK>,
                 <&mmcc MDSS_AXI_CLK>,
                 <&mmcc MDSS_MDP_CLK>;
        clock-names = "iface", "bus", "core";

        #address-cells = <1>;
        #interrupt-cells = <1>;
        #size-cells = <1>;

        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        iommus = <&mmss_smmu 0>;

        power-domains = <&mmcc MDSS_GDSC>;
        ranges;

        display-controller@c901000 {
            compatible = "qcom,msm8998-dpu";
            reg = <0x0c901000 0x8f000>,
                  <0x0c9a8e00 0xf0>,
                  <0x0c9b0000 0x2008>,
                  <0x0c9b8000 0x1040>;
            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";

            clocks = <&mmcc MDSS_AHB_CLK>,
                     <&mmcc MDSS_AXI_CLK>,
                     <&mmcc MNOC_AHB_CLK>,
                     <&mmcc MDSS_MDP_CLK>,
                     <&mmcc MDSS_VSYNC_CLK>;
            clock-names = "iface", "bus", "mnoc", "core", "vsync";

            interrupt-parent = <&mdss>;
            interrupts = <0>;
            operating-points-v2 = <&mdp_opp_table>;
            power-domains = <&rpmpd MSM8998_VDDMX>;

            ports {
                #address-cells = <1>;
                #size-cells = <0>;

                port@0 {
                    reg = <0>;
                    dpu_intf1_out: endpoint {
                        remote-endpoint = <&dsi0_in>;
                    };
                };

                port@1 {
                    reg = <1>;
                    dpu_intf2_out: endpoint {
                        remote-endpoint = <&dsi1_in>;
                    };
                };
            };
        };
    };
...