xref: /freebsd/sys/conf/NOTES (revision ac918c84608b6272c1502e9e3e0bff25fbebeae8)
12365e64fSRodney W. Grimes#
219dde963SPeter Wemm# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
3f71c01ccSPeter Wemm#
4f71c01ccSPeter Wemm# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
5f71c01ccSPeter Wemm# 'makeoptions', 'hints' etc go into the kernel configuration that you
6f71c01ccSPeter Wemm# run config(8) with.
7f71c01ccSPeter Wemm#
8f71c01ccSPeter Wemm# Lines that begin with 'hints.' are NOT for config(8), they go into your
9f71c01ccSPeter Wemm# hints file.  See /boot/device.hints and/or the 'hints' config(8) directive.
102365e64fSRodney W. Grimes#
115d4850e7SAlexander Langer# Please use ``make LINT'' to create an old-style LINT file if you want to
125d4850e7SAlexander Langer# do kernel test-builds.
135d4850e7SAlexander Langer#
14c3aac50fSPeter Wemm# $FreeBSD$
152365e64fSRodney W. Grimes#
162365e64fSRodney W. Grimes
176a8d6623SGarrett Wollman#
186a8d6623SGarrett Wollman# This directive is mandatory; it defines the architecture to be
1956be1833SKATO Takenori# configured for; in this case, the 386 family based IBM-PC and
2056be1833SKATO Takenori# compatibles.
216a8d6623SGarrett Wollman#
225895e3c8SPeter Wemmmachine		i386
232365e64fSRodney W. Grimes
246a8d6623SGarrett Wollman#
256a8d6623SGarrett Wollman# This is the ``identification'' of the kernel.  Usually this should
266a8d6623SGarrett Wollman# be the same as the name of your kernel.
276a8d6623SGarrett Wollman#
286a8d6623SGarrett Wollmanident		LINT
296a8d6623SGarrett Wollman
306a8d6623SGarrett Wollman#
316a8d6623SGarrett Wollman# The `maxusers' parameter controls the static sizing of a number of
326a8d6623SGarrett Wollman# internal system tables by a complicated formula defined in param.c.
336a8d6623SGarrett Wollman#
346a8d6623SGarrett Wollmanmaxusers	10
356a8d6623SGarrett Wollman
366a8d6623SGarrett Wollman#
371b3c07c8SPoul-Henning Kamp# We want LINT to cover profiling as well
381b3c07c8SPoul-Henning Kampprofile 	1
391b3c07c8SPoul-Henning Kamp
401b3c07c8SPoul-Henning Kamp#
417bf01a14SPeter Wemm# The `makeoptions' parameter allows variables to be passed to the
42503e6666SBruce Evans# generated Makefile in the build area.
43503e6666SBruce Evans#
44503e6666SBruce Evans# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
45503e6666SBruce Evans# after most other flags.  Here we use it to inhibit use of non-optimal
46503e6666SBruce Evans# gcc builtin functions (e.g., memcmp).
47503e6666SBruce Evans#
48503e6666SBruce Evans# DEBUG happens to be magic.
497bf01a14SPeter Wemm# The following is equivalent to 'config -g KERNELNAME' and creates
507bf01a14SPeter Wemm# 'kernel.debug' compiled with -g debugging as well as a normal
517bf01a14SPeter Wemm# 'kernel'.  Use 'make install.debug' to install the debug kernel
527bf01a14SPeter Wemm# but that isn't normally necessary as the debug symbols are not loaded
537bf01a14SPeter Wemm# by the kernel and are not useful there anyway.
547bf01a14SPeter Wemm#
552c8635c6SPeter Wemm# KERNEL can be overridden so that you can change the default name of your
562c8635c6SPeter Wemm# kernel.
572c8635c6SPeter Wemm#
58503e6666SBruce Evansmakeoptions	CONF_CFLAGS=-fno-builtin  #Don't allow use of memcmp, etc.
595895e3c8SPeter Wemm#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
602c8635c6SPeter Wemm#makeoptions	KERNEL=foo		#Build kernel "foo" and install "/foo"
617bf01a14SPeter Wemm
627bf01a14SPeter Wemm#
63d43f0f0aSJohn Dyson# Certain applications can grow to be larger than the 128M limit
64d43f0f0aSJohn Dyson# that FreeBSD initially imposes.  Below are some options to
65d43f0f0aSJohn Dyson# allow that limit to grow to 256MB, and can be increased further
66d43f0f0aSJohn Dyson# with changing the parameters.  MAXDSIZ is the maximum that the
67d43f0f0aSJohn Dyson# limit can be set to, and the DFLDSIZ is the default value for
68d43f0f0aSJohn Dyson# the limit.  You might want to set the default lower than the
69d43f0f0aSJohn Dyson# max, and explicitly set the maximum with a shell command for processes
70d43f0f0aSJohn Dyson# that regularly exceed the limit like INND.
71d43f0f0aSJohn Dyson#
725895e3c8SPeter Wemmoptions 	MAXDSIZ="(256*1024*1024)"
735895e3c8SPeter Wemmoptions 	DFLDSIZ="(256*1024*1024)"
74d43f0f0aSJohn Dyson
75a59d364aSMatthew Dillon#
76a59d364aSMatthew Dillon# BLKDEV_IOSIZE sets the default block size used in user block
77a59d364aSMatthew Dillon# device I/O.  Note that this value will be overriden by the label
78a59d364aSMatthew Dillon# when specifying a block device from a label with a non-0
798b22cebbSMatthew Dillon# partition blocksize.  The default is PAGE_SIZE.
80a59d364aSMatthew Dillon#
81a59d364aSMatthew Dillonoptions 	BLKDEV_IOSIZE=8192
82a59d364aSMatthew Dillon
8320f71813SJohn-Mark Gurney# Options for the VM subsystem
849a20f99aSJohn Baldwinoptions 	PQ_CACHESIZE=512	# color for 512k/16k cache
859a20f99aSJohn Baldwin# Deprecated options supported for backwards compatibility
8620f71813SJohn-Mark Gurney#options 	PQ_NOOPT		# No coloring
879a20f99aSJohn Baldwin#options 	PQ_LARGECACHE		# color for 512k/16k cache
8820f71813SJohn-Mark Gurney#options 	PQ_HUGECACHE		# color for 1024k/16k cache
897c43028bSKelly Yancey#options 	PQ_MEDIUMCACHE		# color for 256k/16k cache
907c43028bSKelly Yancey#options 	PQ_NORMALCACHE		# color for 64k/16k cache
9120f71813SJohn-Mark Gurney
92827d623eSJordan K. Hubbard# This allows you to actually store this configuration file into
93827d623eSJordan K. Hubbard# the kernel binary itself, where it may be later read by saying:
94b44dfc0dSBrian Somers#    strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL
95827d623eSJordan K. Hubbard#
96827d623eSJordan K. Hubbardoptions 	INCLUDE_CONFIG_FILE     # Include this file in kernel
97827d623eSJordan K. Hubbard
988b140d57SMike Smith#
998b140d57SMike Smith# The root device and filesystem type can be compiled in;
1008b140d57SMike Smith# this provides a fallback option if the root device cannot
1018b140d57SMike Smith# be correctly guesst by the bootstrap code, or an override if
1028b140d57SMike Smith# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
1038b140d57SMike Smith#
1048b140d57SMike Smithoptions 	ROOTDEVNAME=\"ufs:da0s2e\"
1058b140d57SMike Smith
1066a8d6623SGarrett Wollman
1076a8d6623SGarrett Wollman#####################################################################
108477a642cSPeter Wemm# SMP OPTIONS:
109477a642cSPeter Wemm#
110477a642cSPeter Wemm# SMP enables building of a Symmetric MultiProcessor Kernel.
111477a642cSPeter Wemm# APIC_IO enables the use of the IO APIC for Symmetric I/O.
112477a642cSPeter Wemm#
113477a642cSPeter Wemm# Notes:
114477a642cSPeter Wemm#
115477a642cSPeter Wemm#  An SMP kernel will ONLY run on an Intel MP spec. qualified motherboard.
116477a642cSPeter Wemm#
1175895e3c8SPeter Wemm#  Be sure to disable 'cpu I386_CPU' && 'cpu I486_CPU' for SMP kernels.
118477a642cSPeter Wemm#
119477a642cSPeter Wemm#  Check the 'Rogue SMP hardware' section to see if additional options
120477a642cSPeter Wemm#   are required by your hardware.
121477a642cSPeter Wemm#
122477a642cSPeter Wemm
123477a642cSPeter Wemm# Mandatory:
124477a642cSPeter Wemmoptions 	SMP			# Symmetric MultiProcessor Kernel
125477a642cSPeter Wemmoptions 	APIC_IO			# Symmetric (APIC) I/O
126477a642cSPeter Wemm
127477a642cSPeter Wemm#
128477a642cSPeter Wemm# Rogue SMP hardware:
129477a642cSPeter Wemm#
130477a642cSPeter Wemm
131477a642cSPeter Wemm# Bridged PCI cards:
132477a642cSPeter Wemm#
133477a642cSPeter Wemm# The MP tables of most of the current generation MP motherboards
134477a642cSPeter Wemm#  do NOT properly support bridged PCI cards.  To use one of these
135477a642cSPeter Wemm#  cards you should refer to ???
136477a642cSPeter Wemm
1371fe4c660SJohn Baldwin# SMP Debugging Options:
1381fe4c660SJohn Baldwin#
139ab4f2c18SJohn Baldwin# MUTEX_DEBUG enables various extra assertions in the mutex code.
1401fe4c660SJohn Baldwin# WITNESS enables the mutex witness code which detects deadlocks and cycles
1411fe4c660SJohn Baldwin#         during locking operations.
142660d1e3aSJohn Baldwin# WITNESS_DDB causes the witness code to drop into the kernel debugger if
143660d1e3aSJohn Baldwin#	  a lock heirarchy violation occurs or if locks are held when going to
144660d1e3aSJohn Baldwin#	  sleep.
145660d1e3aSJohn Baldwin# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
146ab4f2c18SJohn Baldwinoptions 	MUTEX_DEBUG
1471fe4c660SJohn Baldwinoptions 	WITNESS
148660d1e3aSJohn Baldwinoptions 	WITNESS_DDB
149660d1e3aSJohn Baldwinoptions 	WITNESS_SKIPSPIN
1501fe4c660SJohn Baldwin
151477a642cSPeter Wemm
152477a642cSPeter Wemm#####################################################################
15356be1833SKATO Takenori# CPU OPTIONS
15456be1833SKATO Takenori
15556be1833SKATO Takenori#
15656be1833SKATO Takenori# You must specify at least one CPU (the one you intend to run on);
15756be1833SKATO Takenori# deleting the specification for CPUs you don't need to use may make
15856be1833SKATO Takenori# parts of the system run faster.  This is especially true removing
15956be1833SKATO Takenori# I386_CPU.
16056be1833SKATO Takenori#
1615895e3c8SPeter Wemmcpu		I386_CPU
1625895e3c8SPeter Wemmcpu		I486_CPU
1635895e3c8SPeter Wemmcpu		I586_CPU		# aka Pentium(tm)
1645895e3c8SPeter Wemmcpu		I686_CPU		# aka Pentium Pro(tm)
16556be1833SKATO Takenori
16656be1833SKATO Takenori#
16756be1833SKATO Takenori# Options for CPU features.
16856be1833SKATO Takenori#
16956be1833SKATO Takenori# CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM
17056be1833SKATO Takenori# BlueLightning CPU.  It works only with Cyrix FPU, and this option
17156be1833SKATO Takenori# should not be used with Intel FPU.
17256be1833SKATO Takenori#
17356be1833SKATO Takenori# CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning
17456be1833SKATO Takenori# CPU if CPU supports it. The default is double-clock mode on
17556be1833SKATO Takenori# BlueLightning CPU box.
17656be1833SKATO Takenori#
17756be1833SKATO Takenori# CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1).
17856be1833SKATO Takenori#
1794962d938SKATO Takenori# CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct
1804962d938SKATO Takenori# mapped mode.  Default is 2-way set associative mode.
1814962d938SKATO Takenori#
1826593be60SKATO Takenori# CPU_CYRIX_NO_LOCK enables weak locking for the entire address space
1839b953cf6SDag-Erling Smørgrav# of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1.
1849b953cf6SDag-Erling Smørgrav# Otherwise, the NO_LOCK bit of CCR1 is cleared.  (NOTE 3)
1856593be60SKATO Takenori#
18656be1833SKATO Takenori# CPU_DISABLE_5X86_LSSER disables load store serialize (i.e. enables
18756be1833SKATO Takenori# reorder).  This option should not be used if you use memory mapped
18856be1833SKATO Takenori# I/O device(s).
18956be1833SKATO Takenori#
19056be1833SKATO Takenori# CPU_FASTER_5X86_FPU enables faster FPU exception handler.
19156be1833SKATO Takenori#
19256be1833SKATO Takenori# CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products
19356be1833SKATO Takenori# for i386 machines.
1944962d938SKATO Takenori#
195ec4e5afbSRobert Nordier# CPU_IORT defines I/O clock delay time (NOTE 1).  Default values of
19656be1833SKATO Takenori# I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively
19756be1833SKATO Takenori# (no clock delay).
19856be1833SKATO Takenori#
19965cbb03cSKATO Takenori# CPU_L2_LATENCY specifed the L2 cache latency value.  This option is used
20065cbb03cSKATO Takenori# only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected.
20165cbb03cSKATO Takenori# The default value is 5.
20265cbb03cSKATO Takenori#
20356be1833SKATO Takenori# CPU_LOOP_EN prevents flushing the prefetch buffer if the destination
20456be1833SKATO Takenori# of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE
20556be1833SKATO Takenori# 1).
20656be1833SKATO Takenori#
20765cbb03cSKATO Takenori# CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs.  This option
20865cbb03cSKATO Takenori# is useful when you use Socket 8 to Socket 370 converter, because most Pentium
20965cbb03cSKATO Takenori# Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs.
21065cbb03cSKATO Takenori#
21156be1833SKATO Takenori# CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1).
21256be1833SKATO Takenori#
21356be1833SKATO Takenori# CPU_SUSP_HLT enables suspend on HALT.  If this option is set, CPU
21456be1833SKATO Takenori# enters suspend mode following execution of HALT instruction.
21556be1833SKATO Takenori#
2164536af6aSKATO Takenori# CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD
2174536af6aSKATO Takenori# K5/K6/K6-2 cpus.
2186593be60SKATO Takenori#
21956be1833SKATO Takenori# CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache
22056be1833SKATO Takenori# flush at hold state.
22156be1833SKATO Takenori#
22256be1833SKATO Takenori# CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs
22356be1833SKATO Takenori# without cache flush at hold state, and (2) write-back CPU cache on
22456be1833SKATO Takenori# Cyrix 6x86 whose revision < 2.7 (NOTE 2).
22556be1833SKATO Takenori#
226b0050656SJohn-Mark Gurney# NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY
227b0050656SJohn-Mark Gurney# Pentiums) from locking up when a LOCK CMPXCHG8B instruction is
228c9e6ddc6SDoug Barton# executed.  This option is only needed if I586_CPU is also defined,
229c9e6ddc6SDoug Barton# and should be included for any non-Pentium CPU that defines it.
230b0050656SJohn-Mark Gurney#
231925f3681SMike Smith# NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors
232925f3681SMike Smith# which indicates that the 15-16MB range is *definitely* not being
233925f3681SMike Smith# occupied by an ISA memory hole.
234925f3681SMike Smith#
23556be1833SKATO Takenori# NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT,
236ec4e5afbSRobert Nordier# CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs.
23756be1833SKATO Takenori# These options may crash your system.
23856be1833SKATO Takenori#
23956be1833SKATO Takenori# NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled
24056be1833SKATO Takenori# in write-through mode when revision < 2.7.  If revision of Cyrix
24156be1833SKATO Takenori# 6x86 >= 2.7, CPU cache is always enabled in write-back mode.
24256be1833SKATO Takenori#
2436593be60SKATO Takenori# NOTE 3: This option may cause failures for software that requires
2446593be60SKATO Takenori# locked cycles in order to operate correctly.
2456593be60SKATO Takenori#
2465895e3c8SPeter Wemmoptions 	CPU_BLUELIGHTNING_FPU_OP_CACHE
2475895e3c8SPeter Wemmoptions 	CPU_BLUELIGHTNING_3X
2485895e3c8SPeter Wemmoptions 	CPU_BTB_EN
2495895e3c8SPeter Wemmoptions 	CPU_DIRECT_MAPPED_CACHE
2505895e3c8SPeter Wemmoptions 	CPU_DISABLE_5X86_LSSER
2515895e3c8SPeter Wemmoptions 	CPU_FASTER_5X86_FPU
2525895e3c8SPeter Wemmoptions 	CPU_I486_ON_386
2535895e3c8SPeter Wemmoptions 	CPU_IORT
25465cbb03cSKATO Takenorioptions 	CPU_L2_LATENCY=5
2555895e3c8SPeter Wemmoptions 	CPU_LOOP_EN
25665cbb03cSKATO Takenorioptions 	CPU_PPRO2CELERON
2575895e3c8SPeter Wemmoptions 	CPU_RSTK_EN
2585895e3c8SPeter Wemmoptions 	CPU_SUSP_HLT
2595895e3c8SPeter Wemmoptions 	CPU_WT_ALLOC
2605895e3c8SPeter Wemmoptions 	CYRIX_CACHE_WORKS
2615895e3c8SPeter Wemmoptions 	CYRIX_CACHE_REALLY_WORKS
2625895e3c8SPeter Wemm#options 	NO_F00F_HACK
26356be1833SKATO Takenori
26456be1833SKATO Takenori#
26556be1833SKATO Takenori# A math emulator is mandatory if you wish to run on hardware which
26656be1833SKATO Takenori# does not have a floating-point processor.  Pick either the original,
26756be1833SKATO Takenori# bogus (but freely-distributable) math emulator, or a much more
26856be1833SKATO Takenori# fully-featured but GPL-licensed emulator taken from Linux.
26956be1833SKATO Takenori#
27056be1833SKATO Takenorioptions 	MATH_EMULATE		#Support for x87 emulation
27156be1833SKATO Takenori# Don't enable both of these in a real config.
27256be1833SKATO Takenorioptions 	GPL_MATH_EMULATE	#Support for x87 emulation via
27356be1833SKATO Takenori					#new math emulator
27456be1833SKATO Takenori
27556be1833SKATO Takenori
27656be1833SKATO Takenori#####################################################################
2776a8d6623SGarrett Wollman# COMPATIBILITY OPTIONS
278690f540cSAndrey A. Chernov
2796a8d6623SGarrett Wollman#
2806a8d6623SGarrett Wollman# Implement system calls compatible with 4.3BSD and older versions of
28156c7a48cSJordan K. Hubbard# FreeBSD.  You probably do NOT want to remove this as much current code
28256c7a48cSJordan K. Hubbard# still relies on the 4.3 emulation.
2836a8d6623SGarrett Wollman#
2845895e3c8SPeter Wemmoptions 	COMPAT_43
2856a8d6623SGarrett Wollman
2866a8d6623SGarrett Wollman#
2876c5e9bbdSMike Pritchard# Allow user-mode programs to manipulate their local descriptor tables.
2886a8d6623SGarrett Wollman# This option is required for the WINE Windows(tm) emulator, and is
2896a8d6623SGarrett Wollman# not used by anything else (that we know of).
2906a8d6623SGarrett Wollman#
2916a8d6623SGarrett Wollmanoptions 	USER_LDT		#allow user-level control of i386 ldt
2926a8d6623SGarrett Wollman
2936a8d6623SGarrett Wollman#
2946a8d6623SGarrett Wollman# These three options provide support for System V Interface
2956a8d6623SGarrett Wollman# Definition-style interprocess communication, in the form of shared
2966a8d6623SGarrett Wollman# memory, semaphores, and message queues, respectively.
2976a8d6623SGarrett Wollman#
2986a8d6623SGarrett Wollmanoptions 	SYSVSHM
2996a8d6623SGarrett Wollmanoptions 	SYSVSEM
3006a8d6623SGarrett Wollmanoptions 	SYSVMSG
3016a8d6623SGarrett Wollman
3026a8d6623SGarrett Wollman
3036a8d6623SGarrett Wollman#####################################################################
3046a8d6623SGarrett Wollman# DEBUGGING OPTIONS
3056a8d6623SGarrett Wollman
3066a8d6623SGarrett Wollman#
307b5d89ca8SBruce Evans# Enable the kernel debugger.
3086a8d6623SGarrett Wollman#
309b5d89ca8SBruce Evansoptions 	DDB
310b5d89ca8SBruce Evans
311b5d89ca8SBruce Evans#
3125ccab2afSGary Palmer# Don't drop into DDB for a panic. Intended for unattended operation
3135ccab2afSGary Palmer# where you may want to drop to DDB from the console, but still want
3145ccab2afSGary Palmer# the machine to recover from a panic
3155ccab2afSGary Palmer#
3165ccab2afSGary Palmeroptions 	DDB_UNATTENDED
3175ccab2afSGary Palmer
3185ccab2afSGary Palmer#
319562d05dfSPaul Traina# If using GDB remote mode to debug the kernel, there's a non-standard
320562d05dfSPaul Traina# extension to the remote protocol that can be used to use the serial
321562d05dfSPaul Traina# port as both the debugging port and the system console.  It's non-
322562d05dfSPaul Traina# standard and you're on your own if you enable it.  See also the
323562d05dfSPaul Traina# "remotechat" variables in the FreeBSD specific version of gdb.
324562d05dfSPaul Traina#
325562d05dfSPaul Trainaoptions 	GDB_REMOTE_CHAT
326562d05dfSPaul Traina
327562d05dfSPaul Traina#
3286a8d6623SGarrett Wollman# KTRACE enables the system-call tracing facility ktrace(2).
3296a8d6623SGarrett Wollman#
3302365e64fSRodney W. Grimesoptions 	KTRACE			#kernel tracing
33121c64a07SAndrey A. Chernov
3326a8d6623SGarrett Wollman#
333c508c1b6SJohn Baldwin# KTR is a kernel tracing mechanism imported from BSD/OS.  Currently it
334c508c1b6SJohn Baldwin# has no userland interface aside from a few sysctl's.  It is enabled with
335c508c1b6SJohn Baldwin# the KTR option.  The KTR_EXTEND option causes trace events to be generated
336c508c1b6SJohn Baldwin# as a string from snprintf rather than as a string and up to 5 argument
337c508c1b6SJohn Baldwin# pointers.  KTR_ENTRIES defines the number of entries in the circular trace
338c508c1b6SJohn Baldwin# buffer.  KTR_COMPILE defines the mask of events to compile into the kernel
339c508c1b6SJohn Baldwin# as defined by the KTR_* constants in <sys/ktr.h>.  KTR_MASK defines the
340c508c1b6SJohn Baldwin# initial value of the ktr_mask variable which determines at runtime what
341c508c1b6SJohn Baldwin# events to trace.  KTR_CPUMASK determines which CPU's log events, with
342d902baa4SJohn Baldwin# bit X corresponding to cpu X.  KTR_VERBOSE enables dumping of KTR events
343d902baa4SJohn Baldwin# to the console by default.  This functionality can be toggled via the
344d902baa4SJohn Baldwin# debug.ktr_verbose sysctl and defaults to off if KTR_VERBOSE is not defined.
345c508c1b6SJohn Baldwin#
346c508c1b6SJohn Baldwinoptions 	KTR
347c508c1b6SJohn Baldwinoptions 	KTR_EXTEND
348c508c1b6SJohn Baldwinoptions 	KTR_ENTRIES=1024
349c508c1b6SJohn Baldwinoptions 	KTR_COMPILE=0x3fffff
350c508c1b6SJohn Baldwinoptions 	KTR_MASK=0x201208
351c508c1b6SJohn Baldwinoptions 	KTR_CPUMASK=0x3
352d902baa4SJohn Baldwinoptions 	KTR_VERBOSE
353c508c1b6SJohn Baldwin
354c508c1b6SJohn Baldwin#
3555526d2d9SEivind Eklund# The INVARIANTS option is used in a number of source files to enable
3566a8d6623SGarrett Wollman# extra sanity checking of internal structures.  This support is not
3576a8d6623SGarrett Wollman# enabled by default because of the extra time it would take to check
3586a8d6623SGarrett Wollman# for these conditions, which can only occur as a result of
3596a8d6623SGarrett Wollman# programming errors.
3606a8d6623SGarrett Wollman#
3615526d2d9SEivind Eklundoptions 	INVARIANTS
3625526d2d9SEivind Eklund
3635526d2d9SEivind Eklund#
3645526d2d9SEivind Eklund# The INVARIANT_SUPPORT option makes us compile in support for
3655526d2d9SEivind Eklund# verifying some of the internal structures.  It is a prerequisite for
3665526d2d9SEivind Eklund# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
3675526d2d9SEivind Eklund# called.  The intent is that you can set 'INVARIANTS' for single
3685526d2d9SEivind Eklund# source files (by changing the source file or specifying it on the
3695526d2d9SEivind Eklund# command line) if you have 'INVARIANT_SUPPORT' enabled.
3705526d2d9SEivind Eklund#
3715526d2d9SEivind Eklundoptions 	INVARIANT_SUPPORT
3725526d2d9SEivind Eklund
3735526d2d9SEivind Eklund#
3745526d2d9SEivind Eklund# The DIAGNOSTIC option is used to enable extra debugging information
3755526d2d9SEivind Eklund# from some parts of the kernel.  As this makes everything more noisy,
3765526d2d9SEivind Eklund# it is disabled by default.
3775526d2d9SEivind Eklund#
3780dc7d907SPoul-Henning Kampoptions 	DIAGNOSTIC
379da59a31cSDavid Greenman
3800dd1eea1SJordan K. Hubbard#
381348acd94SGarrett Wollman# PERFMON causes the driver for Pentium/Pentium Pro performance counters
382348acd94SGarrett Wollman# to be compiled.  See perfmon(4) for more information.
383348acd94SGarrett Wollman#
384348acd94SGarrett Wollmanoptions 	PERFMON
385348acd94SGarrett Wollman
386346ebe51SEivind Eklund
387346ebe51SEivind Eklund#
388346ebe51SEivind Eklund# This option let some drivers co-exist that can't co-exist in a running
389346ebe51SEivind Eklund# system.  This is used to be able to compile all kernel code in one go for
390346ebe51SEivind Eklund# quality assurance purposes (like this file, which the option takes it name
391346ebe51SEivind Eklund# from.)
392346ebe51SEivind Eklund#
393346ebe51SEivind Eklundoptions 	COMPILING_LINT
394346ebe51SEivind Eklund
395346ebe51SEivind Eklund
396348acd94SGarrett Wollman# XXX - this doesn't belong here.
3970dd1eea1SJordan K. Hubbard# Allow ordinary users to take the console - this is useful for X.
3980dd1eea1SJordan K. Hubbardoptions 	UCONSOLE
3990dd1eea1SJordan K. Hubbard
40096fc6efbSPoul-Henning Kamp# XXX - this doesn't belong here either
40196fc6efbSPoul-Henning Kampoptions 	USERCONFIG		#boot -c editor
402ed91f3baSMike Smithoptions 	INTRO_USERCONFIG	#imply -c and show intro screen
40396fc6efbSPoul-Henning Kampoptions 	VISUAL_USERCONFIG	#visual boot -c editor
4046a8d6623SGarrett Wollman
4056a8d6623SGarrett Wollman#####################################################################
4066a8d6623SGarrett Wollman# NETWORKING OPTIONS
40770c0b54cSAndrey A. Chernov
4086a8d6623SGarrett Wollman#
4096a8d6623SGarrett Wollman# Protocol families:
4106a8d6623SGarrett Wollman#  Only the INET (Internet) family is officially supported in FreeBSD.
41111bfa65aSBruce Evans#  Source code for the NS (Xerox Network Service) is provided for amusement
41211bfa65aSBruce Evans#  value.
4136a8d6623SGarrett Wollman#
4146a8d6623SGarrett Wollmanoptions 	INET			#Internet communications protocols
41551f4c152SYoshinobu Inoueoptions 	INET6			#IPv6 communications protocols
4166a800098SYoshinobu Inoueoptions 	IPSEC			#IP security
4176a800098SYoshinobu Inoueoptions 	IPSEC_ESP		#IP security (crypto; define w/ IPSEC)
4186a800098SYoshinobu Inoueoptions 	IPSEC_DEBUG		#debug for IP security
419f73bbaf2SDavid Greenman
420cc6a66f2SJulian Elischeroptions 	IPX			#IPX/SPX communications protocols
421cc6a66f2SJulian Elischeroptions 	IPXIP			#IPX in IP encapsulation (not available)
422cc6a66f2SJulian Elischeroptions 	IPTUNNEL		#IP in IPX encapsulation (not available)
423cc6a66f2SJulian Elischer
424e83e2322SBoris Popovoptions 	NCP			#NetWare Core protocol
425e83e2322SBoris Popov
42634b5fca7SJulian Elischeroptions 	NETATALK		#Appletalk communications protocols
42734b5fca7SJulian Elischer
42811bfa65aSBruce Evans# These are currently broken but are shipped due to interest.
42911bfa65aSBruce Evans#options 	NS			#Xerox NS protocols
430dc915e7cSGarrett Wollman#options 	NSIP			#XNS over IP
43163a74862SSteven Wallace
4324cf49a43SJulian Elischer# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
4334cf49a43SJulian Elischer# Individual node types can be enabled with the corresponding option
4344cf49a43SJulian Elischer# listed below; however, this is not strictly necessary as netgraph
4354cf49a43SJulian Elischer# will automatically load the corresponding KLD module if the node type
43692a3e552SArchie Cobbs# is not already compiled into the kernel. Each type below has a
43792a3e552SArchie Cobbs# corresponding man page, e.g., ng_async(8).
4384cf49a43SJulian Elischeroptions 	NETGRAPH		#netgraph(4) system
4394cf49a43SJulian Elischeroptions 	NETGRAPH_ASYNC
44092a3e552SArchie Cobbsoptions 	NETGRAPH_BPF
4414cf49a43SJulian Elischeroptions 	NETGRAPH_CISCO
4424cf49a43SJulian Elischeroptions 	NETGRAPH_ECHO
44346aa8b9bSArchie Cobbsoptions 	NETGRAPH_ETHER
4444cf49a43SJulian Elischeroptions 	NETGRAPH_FRAME_RELAY
4454cf49a43SJulian Elischeroptions 	NETGRAPH_HOLE
4464cf49a43SJulian Elischeroptions 	NETGRAPH_IFACE
44748e94174SArchie Cobbsoptions 	NETGRAPH_KSOCKET
4484cf49a43SJulian Elischeroptions 	NETGRAPH_LMI
449a2b408adSArchie Cobbs# MPPC compression requires proprietary files (not included)
450a2b408adSArchie Cobbs#options 	NETGRAPH_MPPC_COMPRESSION
451a2b408adSArchie Cobbsoptions 	NETGRAPH_MPPC_ENCRYPTION
4527d7a5b89SArchie Cobbsoptions 	NETGRAPH_ONE2MANY
453b0801bacSArchie Cobbsoptions 	NETGRAPH_PPP
454b0801bacSArchie Cobbsoptions 	NETGRAPH_PPPOE
455add85a1dSArchie Cobbsoptions 	NETGRAPH_PPTPGRE
4564cf49a43SJulian Elischeroptions 	NETGRAPH_RFC1490
457b0801bacSArchie Cobbsoptions 	NETGRAPH_SOCKET
4584cf49a43SJulian Elischeroptions 	NETGRAPH_TEE
4594cf49a43SJulian Elischeroptions 	NETGRAPH_TTY
4604cf49a43SJulian Elischeroptions 	NETGRAPH_UI
461b58a8a3bSJulian Elischeroptions 	NETGRAPH_VJC
4624cf49a43SJulian Elischer
463c9953c3bSPeter Wemmdevice		mn	# Munich32x/Falc54 Nx64kbit/sec cards.
464599fcb02SPoul-Henning Kampdevice		lmc	# tulip based LanMedia WAN cards
4653cf4d0bfSPoul-Henning Kamp
4666a8d6623SGarrett Wollman#
4676a8d6623SGarrett Wollman# Network interfaces:
468f71c01ccSPeter Wemm#  The `loop' device is MANDATORY when networking is enabled.
469f71c01ccSPeter Wemm#  The `ether' device provides generic code to handle
47056c7a48cSJordan K. Hubbard#  Ethernets; it is MANDATORY when a Ethernet device driver is
471722012ccSJulian Elischer#  configured or token-ring is enabled.
472f71c01ccSPeter Wemm#  The 'fddi' device provides generic code to support FDDI.
473f71c01ccSPeter Wemm#  The `sppp' device serves a similar role for certain types
474e7c234a1SPeter Wemm#  of synchronous PPP links (like `cx', `ar').
475f71c01ccSPeter Wemm#  The `sl' device implements the Serial Line IP (SLIP) service.
476f71c01ccSPeter Wemm#  The `ppp' device implements the Point-to-Point Protocol.
477f71c01ccSPeter Wemm#  The `bpf' device enables the Berkeley Packet Filter.  Be
478d29895dcSGarrett Wollman#  aware of the legal and administrative consequences of enabling this
479d29895dcSGarrett Wollman#  option.  The number of devices determines the maximum number of
480d29895dcSGarrett Wollman#  simultaneous BPF clients programs runnable.
481f71c01ccSPeter Wemm#  The `disc' device implements a minimal network interface,
48259d8d13fSGarrett Wollman#  which throws away all packets sent and never receives any.  It is
4839e54a8ceSNik Clayton#  included for testing purposes.  This shows up as the 'ds' interface.
4844c12b435SNick Sayer#  The `tap' device is a pty-like virtual Ethernet interface
485f71c01ccSPeter Wemm#  The `tun' device implements (user-)ppp and nos-tun
486f71c01ccSPeter Wemm#  The `gif' device implements IPv6 over IP4 tunneling,
487cfa1ca9dSYoshinobu Inoue#  IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
488cfa1ca9dSYoshinobu Inoue#  IPv6 over IPv6 tunneling.
489f57fc21cSJeroen Ruigrok van der Werven#  The XBONEHACK option allows the same pair of addresses to be configured on
490f57fc21cSJeroen Ruigrok van der Werven#  multiple gif interfaces.
491f71c01ccSPeter Wemm#  The `faith' device captures packets sent to it and diverts them
492cfa1ca9dSYoshinobu Inoue#  to the IPv4/IPv6 translation daemon.
493d5015639SMunechika SUMIKAWA#  The `stf' device implements 6to4 encapsulation.
494f71c01ccSPeter Wemm#  The `ef' device provides support for multiple ethernet frame types
4955d94d71cSBoris Popov#  specified via ETHER_* options. See ef(4) for details.
4966a8d6623SGarrett Wollman#
497829b5d55SPeter Wemm# The PPP_BSDCOMP option enables support for compress(1) style entire
498829b5d55SPeter Wemm# packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
499829b5d55SPeter Wemm# PPP_FILTER enables code for filtering the ppp data stream and selecting
5006b5ca0d8SDag-Erling Smørgrav# events for resetting the demand dial activity timer - requires bpf.
501829b5d55SPeter Wemm# See pppd(8) for more details.
50289327d27SPeter Wemm#
503f71c01ccSPeter Wemmdevice		ether			#Generic Ethernet
504f71c01ccSPeter Wemmdevice		vlan	1		#VLAN support
505f71c01ccSPeter Wemmdevice		token			#Generic TokenRing
506f71c01ccSPeter Wemmdevice		fddi			#Generic FDDI
507f71c01ccSPeter Wemmdevice		sppp			#Generic Synchronous PPP
508f71c01ccSPeter Wemmdevice		loop	1		#Network loopback device
509f71c01ccSPeter Wemmdevice		bpf			#Berkeley packet filter
510f71c01ccSPeter Wemmdevice		disc			#Discard device (ds0, ds1, etc)
5114c12b435SNick Sayerdevice		tap			#Virtual Ethernet driver
512f71c01ccSPeter Wemmdevice		tun			#Tunnel driver (ppp(8), nos-tun(8))
513f71c01ccSPeter Wemmdevice		sl			#Serial Line IP
514f71c01ccSPeter Wemmdevice		ppp	2		#Point-to-point protocol
51589327d27SPeter Wemmoptions 	PPP_BSDCOMP		#PPP BSD-compress support
51689327d27SPeter Wemmoptions 	PPP_DEFLATE		#PPP zlib/deflate/gzip support
5176b5ca0d8SDag-Erling Smørgravoptions 	PPP_FILTER		#enable bpf filtering (needs bpf)
518d29895dcSGarrett Wollman
519f71c01ccSPeter Wemmdevice		ef			# Multiple ethernet frames support
5205d94d71cSBoris Popovoptions 	ETHER_II		# enable Ethernet_II frame
5215d94d71cSBoris Popovoptions 	ETHER_8023		# enable Ethernet_802.3 (Novell) frame
5225d94d71cSBoris Popovoptions 	ETHER_8022		# enable Ethernet_802.2 frame
5235d94d71cSBoris Popovoptions 	ETHER_SNAP		# enable Ethernet_802.2/SNAP frame
5245d94d71cSBoris Popov
525cfa1ca9dSYoshinobu Inoue# for IPv6
526f71c01ccSPeter Wemmdevice		gif	4		#IPv6 and IPv4 tunneling
527f57fc21cSJeroen Ruigrok van der Wervenoptions 	XBONEHACK
528f71c01ccSPeter Wemmdevice		faith	1		#for IPv6 and IPv4 translation
529d5015639SMunechika SUMIKAWAdevice		stf			#6to4 IPv6 over IPv4 encapsulation
530cfa1ca9dSYoshinobu Inoue
5316a8d6623SGarrett Wollman#
5326a8d6623SGarrett Wollman# Internet family options:
5336a8d6623SGarrett Wollman#
5346a8d6623SGarrett Wollman# TCP_COMPAT_42 causes the TCP code to emulate certain bugs present in
5356a8d6623SGarrett Wollman# 4.2BSD.  This option should not be used unless you have a 4.2BSD
5366a8d6623SGarrett Wollman# machine and TCP connections fail.
5376a8d6623SGarrett Wollman#
5386a8d6623SGarrett Wollman# MROUTING enables the kernel multicast packet forwarder, which works
5396a8d6623SGarrett Wollman# with mrouted(8).
5406a8d6623SGarrett Wollman#
541d29895dcSGarrett Wollman# IPFIREWALL enables support for IP firewall construction, in
542ff6f025aSAlexander Langer# conjunction with the `ipfw' program.  IPFIREWALL_VERBOSE sends
543ff6f025aSAlexander Langer# logged packets to the system logger.  IPFIREWALL_VERBOSE_LIMIT
544ff6f025aSAlexander Langer# limits the number of times a matching entry can be logged.
545ab6e02daSJordan K. Hubbard#
546ab6e02daSJordan K. Hubbard# WARNING:  IPFIREWALL defaults to a policy of "deny ip from any to any"
547ab6e02daSJordan K. Hubbard# and if you do not add other rules during startup to allow access,
548a236d14cSJordan K. Hubbard# YOU WILL LOCK YOURSELF OUT.  It is suggested that you set firewall_type=open
549ab6e02daSJordan K. Hubbard# in /etc/rc.conf when first enabling this feature, then refining the
550ab6e02daSJordan K. Hubbard# firewall rules in /etc/rc.firewall after you've tested that the new kernel
551ab6e02daSJordan K. Hubbard# feature works properly.
5528dd4744eSJordan K. Hubbard#
553ffdd472dSPeter Wemm# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
554ffdd472dSPeter Wemm# allow everything.  Use with care, if a cracker can crash your
555ffdd472dSPeter Wemm# firewall machine, they can get to your protected machines.  However,
556ffdd472dSPeter Wemm# if you are using it as an as-needed filter for specific problems as
557ffdd472dSPeter Wemm# they arise, then this may be for you.  Changing the default to 'allow'
558ffdd472dSPeter Wemm# means that you won't get stuck if the kernel and /sbin/ipfw binary get
559ffdd472dSPeter Wemm# out of sync.
560d29895dcSGarrett Wollman#
56193e0e116SJulian Elischer# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''
56293e0e116SJulian Elischer#
5631b968362SDag-Erling Smørgrav# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
5641b968362SDag-Erling Smørgrav# packets without touching the ttl).  This can be useful to hide firewalls
5651b968362SDag-Erling Smørgrav# from traceroute and similar tools.
5661b968362SDag-Erling Smørgrav#
56765e8111fSBruce Evans# TCPDEBUG is undocumented.
56865e8111fSBruce Evans#
5695895e3c8SPeter Wemmoptions 	TCP_COMPAT_42		#emulate 4.2BSD TCP bugs
570e3178a06SJordan K. Hubbardoptions 	MROUTING		# Multicast routing
571d29895dcSGarrett Wollmanoptions 	IPFIREWALL		#firewall
572d29895dcSGarrett Wollmanoptions 	IPFIREWALL_VERBOSE	#print information about
573d29895dcSGarrett Wollman					# dropped packets
5741857b6feSDag-Erling Smørgravoptions 	IPFIREWALL_FORWARD	#enable transparent proxy support
5755895e3c8SPeter Wemmoptions 	IPFIREWALL_VERBOSE_LIMIT=100	#limit verbosity
576e43a9900SAlexander Langeroptions 	IPFIREWALL_DEFAULT_TO_ACCEPT	#allow everything by default
577210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL		#firewall for IPv6
578210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_VERBOSE
579210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_VERBOSE_LIMIT=100
580210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_DEFAULT_TO_ACCEPT
58193e0e116SJulian Elischeroptions 	IPDIVERT		#divert sockets
5829cc86ee9SGuido van Rooijoptions 	IPFILTER		#ipfilter support
5839cc86ee9SGuido van Rooijoptions 	IPFILTER_LOG		#ipfilter logging
5848259bcdfSJeroen Ruigrok van der Wervenoptions 	IPFILTER_DEFAULT_BLOCK	#block all packets by default
5851b968362SDag-Erling Smørgravoptions 	IPSTEALTH		#support for stealth forwarding
58665e8111fSBruce Evansoptions 	TCPDEBUG
5876a8d6623SGarrett Wollman
588a79b7128SAlfred Perlstein# Statically Link in accept filters
589a79b7128SAlfred Perlsteinoptions		ACCEPT_FILTER_DATA
590a79b7128SAlfred Perlsteinoptions		ACCEPT_FILTER_HTTP
591a79b7128SAlfred Perlstein
592e46cd3d4SDag-Erling Smørgrav# The following options add sysctl variables for controlling how certain
593e46cd3d4SDag-Erling Smørgrav# TCP packets are handled.
594e46cd3d4SDag-Erling Smørgrav#
595e46cd3d4SDag-Erling Smørgrav# TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
596e46cd3d4SDag-Erling Smørgrav# prevents nmap et al. from identifying the TCP/IP stack, but breaks support
597e46cd3d4SDag-Erling Smørgrav# for RFC1644 extensions and is not recommended for web servers.
598e46cd3d4SDag-Erling Smørgrav#
5998dc47ef6SDag-Erling Smørgrav# TCP_RESTRICT_RST adds support for blocking the emission of TCP RST packets.
6008dc47ef6SDag-Erling Smørgrav# This is useful on systems which are exposed to SYN floods (e.g. IRC servers)
6018dc47ef6SDag-Erling Smørgrav# or any system which one does not want to be easily portscannable.
6028dc47ef6SDag-Erling Smørgrav#
603e46cd3d4SDag-Erling Smørgravoptions 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN
6048dc47ef6SDag-Erling Smørgravoptions 	TCP_RESTRICT_RST	#restrict emission of TCP RST
605e46cd3d4SDag-Erling Smørgrav
60668e9d934SLuigi Rizzo# DUMMYNET enables the "dummynet" bandwidth limiter. You need
60768e9d934SLuigi Rizzo# IPFIREWALL as well. See the dummynet(4) manpage for more info.
60868e9d934SLuigi Rizzo# BRIDGE enables bridging between ethernet cards -- see bridge(4).
60968e9d934SLuigi Rizzo# You can use IPFIREWALL and dummynet together with bridging.
61068ec4eb6SLuigi Rizzooptions 	DUMMYNET
61168ec4eb6SLuigi Rizzooptions 	BRIDGE
61268e9d934SLuigi Rizzo
6133f8c4506SPoul-Henning Kamp#
6143f8c4506SPoul-Henning Kamp# ATM (HARP version) options
6153f8c4506SPoul-Henning Kamp#
6163f8c4506SPoul-Henning Kamp# ATM_CORE includes the base ATM functionality code.  This must be included
6173f8c4506SPoul-Henning Kamp#	for ATM support.
6183f8c4506SPoul-Henning Kamp#
6193f8c4506SPoul-Henning Kamp# ATM_IP includes support for running IP over ATM.
6203f8c4506SPoul-Henning Kamp#
6213f8c4506SPoul-Henning Kamp# At least one (and usually only one) of the following signalling managers
6223f8c4506SPoul-Henning Kamp# must be included (note that all signalling managers include PVC support):
6233f8c4506SPoul-Henning Kamp# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
6243f8c4506SPoul-Henning Kamp# ATM_SPANS includes support for the `spans' signalling manager, which runs
6253f8c4506SPoul-Henning Kamp#	the FORE Systems's proprietary SPANS signalling protocol.
6263f8c4506SPoul-Henning Kamp# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
6273f8c4506SPoul-Henning Kamp#	which run the ATM Forum UNI 3.x signalling protocols.
6283f8c4506SPoul-Henning Kamp#
6293f8c4506SPoul-Henning Kamp# The `hea' driver provides support for the Efficient Networks, Inc.
6303f8c4506SPoul-Henning Kamp# ENI-155p ATM PCI Adapter.
6313f8c4506SPoul-Henning Kamp#
6323f8c4506SPoul-Henning Kamp# The `hfa' driver provides support for the FORE Systems, Inc.
6333f8c4506SPoul-Henning Kamp# PCA-200E ATM PCI Adapter.
6343f8c4506SPoul-Henning Kamp#
6353f8c4506SPoul-Henning Kampoptions 	ATM_CORE		#core ATM protocol family
6363f8c4506SPoul-Henning Kampoptions 	ATM_IP			#IP over ATM support
6373f8c4506SPoul-Henning Kampoptions 	ATM_SIGPVC		#SIGPVC signalling manager
6383f8c4506SPoul-Henning Kampoptions 	ATM_SPANS		#SPANS signalling manager
6393f8c4506SPoul-Henning Kampoptions 	ATM_UNI			#UNI signalling manager
640c9953c3bSPeter Wemmdevice		hea			#Efficient ENI-155p ATM PCI
641c9953c3bSPeter Wemmdevice		hfa			#FORE PCA-200E ATM PCI
6423f8c4506SPoul-Henning Kamp
6436a8d6623SGarrett Wollman
6446a8d6623SGarrett Wollman#####################################################################
6456a8d6623SGarrett Wollman# FILESYSTEM OPTIONS
646e3178a06SJordan K. Hubbard
6472365e64fSRodney W. Grimes#
6486a8d6623SGarrett Wollman# Only the root, /usr, and /tmp filesystems need be statically
6496a8d6623SGarrett Wollman# compiled; everything else will be automatically loaded at mount
650c5b193bfSPoul-Henning Kamp# time.  (Exception: the UFS family---FFS, and MFS --- cannot
6516a8d6623SGarrett Wollman# currently be demand-loaded.)  Some people still prefer to statically
6526a8d6623SGarrett Wollman# compile other filesystems as well.
6536a8d6623SGarrett Wollman#
654a5b88b01SKATO Takenori# NB: The NULL, PORTAL, UMAP and UNION filesystems are known to be
655a5b88b01SKATO Takenori# buggy, and WILL panic your system if you attempt to do anything with
656a5b88b01SKATO Takenori# them.  They are included here as an incentive for some enterprising
657a5b88b01SKATO Takenori# soul to sit down and fix them.
6582365e64fSRodney W. Grimes#
659f1a9c715SDavid Greenman
6606a8d6623SGarrett Wollman# One of these is mandatory:
6616a8d6623SGarrett Wollmanoptions 	FFS			#Fast filesystem
66232a023dcSDavid E. O'Brienoptions 	MFS			#Memory File System
6636a8d6623SGarrett Wollmanoptions 	NFS			#Network File System
6646a8d6623SGarrett Wollman
6656a8d6623SGarrett Wollman# The rest are optional:
6667c115697SPoul-Henning Kamp#options 	NFS_NOSERVER		#Disable the NFS-server code.
6675895e3c8SPeter Wemmoptions 	CD9660			#ISO 9660 filesystem
668f1a9c715SDavid Greenmanoptions 	FDESC			#File descriptor filesystem
669f1a9c715SDavid Greenmanoptions 	KERNFS			#Kernel filesystem
670dba11ce5SAlexander Langeroptions 	MSDOSFS			#MS DOS File System (FAT, FAT32)
6713ee9bf69SEivind Eklundoptions 	NTFS			#NT File System
672f1a9c715SDavid Greenmanoptions 	NULLFS			#NULL filesystem
673e83e2322SBoris Popovoptions 	NWFS			#NetWare filesystem
674f1a9c715SDavid Greenmanoptions 	PORTAL			#Portal filesystem
675f1a9c715SDavid Greenmanoptions 	PROCFS			#Process filesystem
676f1a9c715SDavid Greenmanoptions 	UMAPFS			#UID map filesystem
677f1a9c715SDavid Greenmanoptions 	UNION			#Union filesystem
678a788bdc4SDavid E. O'Brien# The xFS_ROOT options REQUIRE the associated ``options xFS''
6795895e3c8SPeter Wemmoptions 	CD9660_ROOT		#CD-ROM usable as root device
6807b778b5eSEivind Eklundoptions 	FFS_ROOT		#FFS usable as root device
6817b778b5eSEivind Eklundoptions 	NFS_ROOT		#NFS usable as root device
682c796cfa1SAndrzej Bialecki# This code is still experimental (e.g. doesn't handle disk slices well).
683c796cfa1SAndrzej Bialecki# Also, 'options MFS' is currently incompatible with DEVFS.
684b2ca5572SAlexander Langer# You can configure the DEVFS (e.g. setting device permissions) in the
685b2ca5572SAlexander Langer# /etc/rc.devfs file.
68646746c3bSJulian Elischeroptions 	DEVFS			#devices filesystem
6870b0c10b4SAdrian Chadd# This code enables IFS, an FFS which exports inodes as the namespace.
6880b0c10b4SAdrian Chadd# You can find details in src/sys/ufs/ifs/README .
6890b0c10b4SAdrian Chaddoptions		IFS
690f1a9c715SDavid Greenman
691d0a28bafSAlexander Langer# Soft updates is a technique for improving file system speed and
692d61e6649SAlexander Langer# making abrupt shutdown less risky.
693f8f8d7afSEivind Eklund#
6943d5c4fdcSPoul-Henning Kampoptions 	SOFTUPDATES
695b1897c19SJulian Elischer
696a64ed089SRobert Watson# Extended attributes allow additional data to be associated with files,
697a64ed089SRobert Watson# and is used for ACLs, Capabilities, and MAC labels
698a64ed089SRobert Watson#
699a64ed089SRobert Watsonoptions	FFS_EXTATTR
700a64ed089SRobert Watson
70171e4fff8SPoul-Henning Kamp# Make space in the kernel for a root filesystem on a md device.
70271e4fff8SPoul-Henning Kamp# Define to the number of kilobytes to reserve for the filesystem.
70371e4fff8SPoul-Henning Kampoptions 	MD_ROOT_SIZE=10
70471e4fff8SPoul-Henning Kamp
70571e4fff8SPoul-Henning Kamp# Make the md device a potential root device, either with preloaded
70671e4fff8SPoul-Henning Kamp# images of type mfs_root or md_root.
70771e4fff8SPoul-Henning Kampoptions 	MD_ROOT
708d52d7365SPoul-Henning Kamp
709f2744793SSheldon Hearn# Specify double the default maximum size for malloc(9)-backed md devices.
710f2744793SSheldon Hearnoptions 	MD_NSECT=40000
711866c1fb1SSheldon Hearn
712a401ebbeSDavid Greenman# Allow this many swap-devices.
713b1529bdaSPeter Wemmoptions 	NSWAPDEV=20
714a401ebbeSDavid Greenman
715495967e4SEivind Eklund# Disk quotas are supported when this option is enabled.
7162365e64fSRodney W. Grimesoptions 	QUOTA			#enable disk quotas
7176a8d6623SGarrett Wollman
718276756a4SDag-Erling Smørgrav# If you are running a machine just as a fileserver for PC and MAC
719276756a4SDag-Erling Smørgrav# users, using SAMBA or Netatalk, you may consider setting this option
720276756a4SDag-Erling Smørgrav# and keeping all those users' directories on a filesystem that is
721276756a4SDag-Erling Smørgrav# mounted with the suiddir option. This gives new files the same
722ec4e5afbSRobert Nordier# ownership as the directory (similar to group). It's a security hole
7236110161fSDag-Erling Smørgrav# if you let these users run programs, so confine it to file-servers
724276756a4SDag-Erling Smørgrav# (but it'll save you lots of headaches in those cases). Root owned
725276756a4SDag-Erling Smørgrav# directories are exempt and X bits are cleared. The suid bit must be
726276756a4SDag-Erling Smørgrav# set on the directory as well; see chmod(1) PC owners can't see/set
727276756a4SDag-Erling Smørgrav# ownerships so they keep getting their toes trodden on. This saves
728276756a4SDag-Erling Smørgrav# you all the support calls as the filesystem it's used on will act as
729276756a4SDag-Erling Smørgrav# they expect: "It's my dir so it must be my file".
730cb800e34SJulian Elischer#
731cb800e34SJulian Elischeroptions 	SUIDDIR
732cb800e34SJulian Elischer
733df394affSJohn-Mark Gurney# NFS options:
7345895e3c8SPeter Wemmoptions 	NFS_MINATTRTIMO=3	# VREG attrib cache timeout in sec
7355895e3c8SPeter Wemmoptions 	NFS_MAXATTRTIMO=60
7365895e3c8SPeter Wemmoptions 	NFS_MINDIRATTRTIMO=30	# VDIR attrib cache timeout in sec
7375895e3c8SPeter Wemmoptions 	NFS_MAXDIRATTRTIMO=60
7385895e3c8SPeter Wemmoptions 	NFS_GATHERDELAY=10	# Default write gather delay (msec)
7395895e3c8SPeter Wemmoptions 	NFS_UIDHASHSIZ=29	# Tune the size of nfssvc_sock with this
7405895e3c8SPeter Wemmoptions 	NFS_WDELAYHASHSIZ=16	# and with this
7415895e3c8SPeter Wemmoptions 	NFS_MUIDHASHSIZ=63	# Tune the size of nfsmount with this
742df394affSJohn-Mark Gurneyoptions 	NFS_DEBUG		# Enable NFS Debugging
743df394affSJohn-Mark Gurney
7449afcea2fSRobert V. Baron# Coda stuff:
7459afcea2fSRobert V. Baronoptions 	CODA			#CODA filesystem.
746f71c01ccSPeter Wemmdevice		vcoda	4		#coda minicache <-> venus comm.
747a1d55890SJordan K. Hubbard
748053a2b61SEivind Eklund#
749053a2b61SEivind Eklund# Add support for the EXT2FS filesystem of Linux fame.  Be a bit
750053a2b61SEivind Eklund# careful with this - the ext2fs code has a tendency to lag behind
751053a2b61SEivind Eklund# changes and not be exercised very much, so mounting read/write could
752053a2b61SEivind Eklund# be dangerous (and even mounting read only could result in panics.)
753053a2b61SEivind Eklund#
7545895e3c8SPeter Wemmoptions 	EXT2FS
755053a2b61SEivind Eklund
756dd85920aSJason Evans# Use real implementations of the aio_* system calls.  There are numerous
757dd85920aSJason Evans# stability issues in the current aio code that make it unsuitable for
758dd85920aSJason Evans# inclusion on shell boxes.
759dd85920aSJason Evansoptions 	VFS_AIO
760053a2b61SEivind Eklund
761c16dc61bSEivind Eklund# Enable the code UFS IO optimization through the VM system.  This allows
762c16dc61bSEivind Eklund# use VM operations instead of copying operations when possible.
763c16dc61bSEivind Eklund#
764c16dc61bSEivind Eklund# Even with this enabled, actual use of the code is still controlled by the
765c16dc61bSEivind Eklund# sysctl vfs.ioopt.  0 gives no optimization, 1 gives normal (use VM
766c16dc61bSEivind Eklund# operations if a request happens to fit), 2 gives agressive optimization
767c16dc61bSEivind Eklund# (the operations are split to do as much as possible through the VM system.)
768c16dc61bSEivind Eklund#
769c16dc61bSEivind Eklund# Enabling this will probably not give an overall speedup except for
770c16dc61bSEivind Eklund# special workloads.
771c16dc61bSEivind Eklundoptions 	ENABLE_VFS_IOOPT
772c16dc61bSEivind Eklund
77315bbdecfSMark Murray# Cryptographically secure random number generator; /dev/[u]random
774ac519db0SMark Murraydevice		random
77515bbdecfSMark Murray
7765f3431b5SMark Murray# Avoid blocking the random device
7775f3431b5SMark Murrayoptions		NOBLOCKRANDOM
7785f3431b5SMark Murray
7796a8d6623SGarrett Wollman
7806a8d6623SGarrett Wollman#####################################################################
781abc97a06SBruce Evans# POSIX P1003.1B
782abc97a06SBruce Evans
783ec4e5afbSRobert Nordier# Real time extensions added in the 1993 Posix
784abc97a06SBruce Evans# P1003_1B: Infrastructure
785abc97a06SBruce Evans# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
786abc97a06SBruce Evans# _KPOSIX_VERSION:             Version kernel is built for
787abc97a06SBruce Evans
7885895e3c8SPeter Wemmoptions 	P1003_1B
7895895e3c8SPeter Wemmoptions 	_KPOSIX_PRIORITY_SCHEDULING
7905895e3c8SPeter Wemmoptions 	_KPOSIX_VERSION=199309L
791abc97a06SBruce Evans
792abc97a06SBruce Evans
793abc97a06SBruce Evans#####################################################################
794000033d0SJeroen Ruigrok van der Werven# CLOCK OPTIONS
795000033d0SJeroen Ruigrok van der Werven
796000033d0SJeroen Ruigrok van der Werven# The granularity of operation is controlled by the kernel option HZ whose
797000033d0SJeroen Ruigrok van der Werven# default value (100) means a granularity of 10ms.  For an accurate simulation
798000033d0SJeroen Ruigrok van der Werven# of high data rates it might be necessary to reduce the timer granularity to
799000033d0SJeroen Ruigrok van der Werven# 1ms or less.  Consider, however, that some interfaces using programmed I/O
800000033d0SJeroen Ruigrok van der Werven# may require a considerable time to output packets.  So, reducing the
801000033d0SJeroen Ruigrok van der Werven# granularity too much might actually cause ticks to be missed thus reducing
802000033d0SJeroen Ruigrok van der Werven# the accuracy of operation.
803000033d0SJeroen Ruigrok van der Werven
804000033d0SJeroen Ruigrok van der Wervenoptions 	HZ=100
805000033d0SJeroen Ruigrok van der Werven
806000033d0SJeroen Ruigrok van der Werven# Other clock options
807000033d0SJeroen Ruigrok van der Werven
808000033d0SJeroen Ruigrok van der Wervenoptions 	CLK_CALIBRATION_LOOP
809000033d0SJeroen Ruigrok van der Wervenoptions 	CLK_USE_I8254_CALIBRATION
810000033d0SJeroen Ruigrok van der Wervenoptions 	CLK_USE_TSC_CALIBRATION
811000033d0SJeroen Ruigrok van der Werven
812000033d0SJeroen Ruigrok van der Werven
813000033d0SJeroen Ruigrok van der Werven#####################################################################
814de6a307eSPeter Dufault# SCSI DEVICES
815de6a307eSPeter Dufault
8166a8d6623SGarrett Wollman# SCSI DEVICE CONFIGURATION
8176a8d6623SGarrett Wollman
8186a8d6623SGarrett Wollman# The SCSI subsystem consists of the `base' SCSI code, a number of
819ebc1a0e2SPeter Dufault# high-level SCSI device `type' drivers, and the low-level host-adapter
8206a8d6623SGarrett Wollman# device drivers.  The host adapters are listed in the ISA and PCI
8216a8d6623SGarrett Wollman# device configuration sections below.
8226a8d6623SGarrett Wollman#
823265368d4SRodney W. Grimes# Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so
824ebc1a0e2SPeter Dufault# that a given bus, target, and LUN always come on line as the same
825ebc1a0e2SPeter Dufault# device unit.  In earlier versions the unit numbers were assigned
826ebc1a0e2SPeter Dufault# in the order that the devices were probed on the SCSI bus.  This
827ebc1a0e2SPeter Dufault# means that if you removed a disk drive, you may have had to rewrite
828ebc1a0e2SPeter Dufault# your /etc/fstab file, and also that you had to be careful when adding
829ebc1a0e2SPeter Dufault# a new disk as it may have been probed earlier and moved your device
830ebc1a0e2SPeter Dufault# configuration around.
831ebc1a0e2SPeter Dufault
832ebc1a0e2SPeter Dufault# This old behavior is maintained as the default behavior.  The unit
833ebc1a0e2SPeter Dufault# assignment begins with the first non-wired down unit for a device
834700daf5eSJustin T. Gibbs# type.  For example, if you wire a disk as "da3" then the first
835700daf5eSJustin T. Gibbs# non-wired disk will be assigned da4.
836ebc1a0e2SPeter Dufault
837ebc1a0e2SPeter Dufault# The syntax for wiring down devices is:
838ebc1a0e2SPeter Dufault
839f71c01ccSPeter Wemmhint.scbus.0.at="ahc0"
840f71c01ccSPeter Wemmhint.scbus.1.at="ahc1"
841f71c01ccSPeter Wemmhint.scbus.1.bus="0"
842f71c01ccSPeter Wemmhint.scbus.3.at="ahc2"
843f71c01ccSPeter Wemmhint.scbus.3.bus="0"
844f71c01ccSPeter Wemmhint.scbus.2.at="ahc2"
845f71c01ccSPeter Wemmhint.scbus.2.bus="1"
846f71c01ccSPeter Wemmhint.da.0.at="scbus0"
847f71c01ccSPeter Wemmhint.da.0.target="0"
848f71c01ccSPeter Wemmhint.da.0.unit="0"
849f71c01ccSPeter Wemmhint.da.1.at="scbus3"
850f71c01ccSPeter Wemmhint.da.1.target="1"
851f71c01ccSPeter Wemmhint.da.2.at="scbus2"
852f71c01ccSPeter Wemmhint.da.2.target="3"
853f71c01ccSPeter Wemmhint.sa.1.at="scbus1"
854f71c01ccSPeter Wemmhint.sa.1.target="6"
855ebc1a0e2SPeter Dufault
856ebc1a0e2SPeter Dufault# "units" (SCSI logical unit number) that are not specified are
857ebc1a0e2SPeter Dufault# treated as if specified as LUN 0.
858ebc1a0e2SPeter Dufault
859ebc1a0e2SPeter Dufault# All SCSI devices allocate as many units as are required.
860ebc1a0e2SPeter Dufault
861cf2458c9SMatt Jacob# The ch driver drives SCSI Media Changer ("jukebox") devices.
862cf2458c9SMatt Jacob#
863cf2458c9SMatt Jacob# The da driver drives SCSI Direct Access ("disk") and Optical Media
864cf2458c9SMatt Jacob# ("WORM") devices.
865cf2458c9SMatt Jacob#
866cf2458c9SMatt Jacob# The sa driver drives SCSI Sequential Access ("tape") devices.
867cf2458c9SMatt Jacob#
868cf2458c9SMatt Jacob# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
869cf2458c9SMatt Jacob#
870cf2458c9SMatt Jacob# The ses driver drives SCSI Envinronment Services ("ses") and
871cf2458c9SMatt Jacob# SAF-TE ("SCSI Accessable Fault-Tolerant Enclosure") devices.
872cf2458c9SMatt Jacob#
873cf2458c9SMatt Jacob# The pt driver drives SCSI Processor devices.
874cf2458c9SMatt Jacob#
875cf2458c9SMatt Jacob#
876cf2458c9SMatt Jacob# Target Mode support is provided here but also requires that a SIM
877cf2458c9SMatt Jacob# (SCSI Host Adapter Driver) provide support as well.
878cf2458c9SMatt Jacob#
879cf2458c9SMatt Jacob# The targ driver provides target mode support as a Processor type device.
880cf2458c9SMatt Jacob# It exists to give the minimal context necessary to respond to Inquiry
881cf2458c9SMatt Jacob# commands. There is a sample user application that shows how the rest
882cf2458c9SMatt Jacob# of the command support might be done in /usr/share/examples/scsi_target.
883cf2458c9SMatt Jacob#
884cf2458c9SMatt Jacob# The targbh driver provides target mode support and exists to respond
885cf2458c9SMatt Jacob# to incoming commands that do not otherwise have a logical unit assigned
886cf2458c9SMatt Jacob# to them.
887cf2458c9SMatt Jacob#
888265368d4SRodney W. Grimes# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
889cf2458c9SMatt Jacob# configuration as the "pass" driver.
890ebc1a0e2SPeter Dufault
891c9953c3bSPeter Wemmdevice		scbus		#base SCSI code
892c9953c3bSPeter Wemmdevice		ch		#SCSI media changers
893c9953c3bSPeter Wemmdevice		da		#SCSI direct access devices (aka disks)
894c9953c3bSPeter Wemmdevice		sa		#SCSI tapes
895c9953c3bSPeter Wemmdevice		cd		#SCSI CD-ROMs
89664ed91d5SMatt Jacobdevice		ses		#SCSI Environmental Services (and SAF-TE)
897cf2458c9SMatt Jacobdevice		pt		#SCSI processor
89864ed91d5SMatt Jacobdevice		targ		#SCSI Target Mode Code
89964ed91d5SMatt Jacobdevice		targbh		#SCSI Target Mode Blackhole Device
900cf2458c9SMatt Jacobdevice		pass		#CAM passthrough driver
9018909a72bSPeter Dufault
902700daf5eSJustin T. Gibbs# CAM OPTIONS:
903700daf5eSJustin T. Gibbs# debugging options:
904700daf5eSJustin T. Gibbs# -- NOTE --  If you specify one of the bus/target/lun options, you must
905700daf5eSJustin T. Gibbs#             specify them all!
906700daf5eSJustin T. Gibbs# CAMDEBUG: When defined enables debugging macros
907700daf5eSJustin T. Gibbs# CAM_DEBUG_BUS:  Debug the given bus.  Use -1 to debug all busses.
908700daf5eSJustin T. Gibbs# CAM_DEBUG_TARGET:  Debug the given target.  Use -1 to debug all targets.
909700daf5eSJustin T. Gibbs# CAM_DEBUG_LUN:  Debug the given lun.  Use -1 to debug all luns.
910d05caa00SKenneth D. Merry# CAM_DEBUG_FLAGS:  OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
911d05caa00SKenneth D. Merry#                   CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
912700daf5eSJustin T. Gibbs#
913700daf5eSJustin T. Gibbs# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
914700daf5eSJustin T. Gibbs# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
915700daf5eSJustin T. Gibbs# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
91656234437SKenneth D. Merry# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
91756234437SKenneth D. Merry#             queue after a bus reset, and the number of milliseconds to
91856234437SKenneth D. Merry#             freeze the device queue after a bus device reset.
919700daf5eSJustin T. Gibbsoptions 	CAMDEBUG
9205895e3c8SPeter Wemmoptions 	CAM_DEBUG_BUS=-1
9215895e3c8SPeter Wemmoptions 	CAM_DEBUG_TARGET=-1
9225895e3c8SPeter Wemmoptions 	CAM_DEBUG_LUN=-1
9235895e3c8SPeter Wemmoptions 	CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
9245895e3c8SPeter Wemmoptions 	CAM_MAX_HIGHPOWER=4
925700daf5eSJustin T. Gibbsoptions 	SCSI_NO_SENSE_STRINGS
926700daf5eSJustin T. Gibbsoptions 	SCSI_NO_OP_STRINGS
92756234437SKenneth D. Merryoptions 	SCSI_DELAY=8000	# Be pessimistic about Joe SCSI device
9281a7c583cSGarrett Wollman
929700daf5eSJustin T. Gibbs# Options for the CAM CDROM driver:
930700daf5eSJustin T. Gibbs# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
931700daf5eSJustin T. Gibbs# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
932700daf5eSJustin T. Gibbs#                           enforced if there is I/O waiting for another LUN
933700daf5eSJustin T. Gibbs# The compiled in defaults for these variables are 2 and 10 seconds,
934700daf5eSJustin T. Gibbs# respectively.
93593063432SJoerg Wunsch#
936700daf5eSJustin T. Gibbs# These can also be changed on the fly with the following sysctl variables:
937700daf5eSJustin T. Gibbs# kern.cam.cd.changer.min_busy_seconds
938700daf5eSJustin T. Gibbs# kern.cam.cd.changer.max_busy_seconds
93993063432SJoerg Wunsch#
9405895e3c8SPeter Wemmoptions 	CHANGER_MIN_BUSY_SECONDS=2
9415895e3c8SPeter Wemmoptions 	CHANGER_MAX_BUSY_SECONDS=10
94293063432SJoerg Wunsch
9439dfb4471SKenneth D. Merry# Options for the CAM sequential access driver:
9449dfb4471SKenneth D. Merry# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
9459dfb4471SKenneth D. Merry# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
9469dfb4471SKenneth D. Merry# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
9479f050ed5SMatt Jacob# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
9485895e3c8SPeter Wemmoptions 	SA_SPACE_TIMEOUT="(60)"
9495895e3c8SPeter Wemmoptions 	SA_REWIND_TIMEOUT="(2*60)"
9505895e3c8SPeter Wemmoptions 	SA_ERASE_TIMEOUT="(4*60)"
9519f050ed5SMatt Jacoboptions 	SA_1FM_AT_EOD
9529dfb4471SKenneth D. Merry
9533ece1bd2SKenneth D. Merry# Optional timeout for the CAM processor target (pt) device
9543ece1bd2SKenneth D. Merry# This is specified in seconds.  The default is 60 seconds.
9553ece1bd2SKenneth D. Merryoptions 	SCSI_PT_DEFAULT_TIMEOUT="60"
9563ece1bd2SKenneth D. Merry
9578904e70bSMatt Jacob# Optional enable of doing SES passthrough on other devices (e.g., disks)
9588904e70bSMatt Jacob#
9598904e70bSMatt Jacob# Normally disabled because a lot of newer SCSI disks report themselves
9608904e70bSMatt Jacob# as having SES capabilities, but this can then clot up attempts to build
9618904e70bSMatt Jacob# build a topology with the SES device that's on the box these drives
9628904e70bSMatt Jacob# are in....
9638904e70bSMatt Jacoboptions		SES_ENABLE_PASSTHROUGH
9648904e70bSMatt Jacob
9656a8d6623SGarrett Wollman
9666a8d6623SGarrett Wollman#####################################################################
9676a8d6623SGarrett Wollman# MISCELLANEOUS DEVICES AND OPTIONS
9686a8d6623SGarrett Wollman
9691160da92SJoerg Wunsch# The `pty' device usually turns out to be ``effectively mandatory'',
9701160da92SJoerg Wunsch# as it is required for `telnetd', `rlogind', `screen', `emacs', and
9711160da92SJoerg Wunsch# `xterm', among others.
9721160da92SJoerg Wunsch
973f71c01ccSPeter Wemmdevice		pty		#Pseudo ttys
974f71c01ccSPeter Wemmdevice		speaker		#Play IBM BASIC-style noises out your speaker
975f71c01ccSPeter Wemmdevice		gzip		#Exec gzipped a.out's
976f71c01ccSPeter Wemmdevice		vn		#Vnode driver (turns a file into a device)
977f71c01ccSPeter Wemmdevice		md		#Memory/malloc disk
978f71c01ccSPeter Wemmdevice		snp		#Snoop device - to look at pty/vty/etc..
979f71c01ccSPeter Wemmdevice		ccd	4	#Concatenated disk driver
980be174c7eSGreg Lehey
981be174c7eSGreg Lehey# Configuring Vinum into the kernel is not necessary, since the kld
982be174c7eSGreg Lehey# module gets started automatically when vinum(8) starts.  This
983be174c7eSGreg Lehey# device is also untested.  Use at your own risk.
9844cc4752cSGreg Lehey#
9854cc4752cSGreg Lehey# The option VINUMDEBUG must match the value set in CFLAGS
98698a44096SSheldon Hearn# in src/sbin/vinum/Makefile.  Failure to do so will result in
9874cc4752cSGreg Lehey# the following message from vinum(8):
9884cc4752cSGreg Lehey#
9894cc4752cSGreg Lehey# Can't get vinum config: Invalid argument
9904cc4752cSGreg Lehey#
9914cc4752cSGreg Lehey# see vinum(4) for more reasons not to use these options.
992f71c01ccSPeter Wemmdevice		vinum		#Vinum concat/mirror/raid driver
9933ea799d5SPeter Wemmoptions 	VINUMDEBUG	#enable Vinum debugging hooks
9949ba0e7c3SBruce Evans
99558067a99SPoul-Henning Kamp# Size of the kernel message buffer.  Should be N * pagesize.
9965895e3c8SPeter Wemmoptions 	MSGBUF_SIZE=40960
99758067a99SPoul-Henning Kamp
9986a8d6623SGarrett Wollman
9996a8d6623SGarrett Wollman#####################################################################
1000d61e6649SAlexander Langer# HARDWARE BUS CONFIGURATION
10016a8d6623SGarrett Wollman
1002d61e6649SAlexander Langer# ISA, EISA, MCA and PCI bus:
10036a8d6623SGarrett Wollman
10046a8d6623SGarrett Wollman#
100516e164e3SBruce Evans# Mandatory ISA devices: isa, npx
10066a8d6623SGarrett Wollman#
1007c9953c3bSPeter Wemmdevice		isa
10082365e64fSRodney W. Grimes
10096a8d6623SGarrett Wollman#
10106a8d6623SGarrett Wollman# Options for `isa':
10116a8d6623SGarrett Wollman#
1012d72ee36fSBruce Evans# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
1013d72ee36fSBruce Evans# interrupt controller.  This saves about 0.7-1.25 usec for each interrupt.
1014d72ee36fSBruce Evans# This option breaks suspend/resume on some portables.
1015d72ee36fSBruce Evans#
10169ba0e7c3SBruce Evans# AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
1017d72ee36fSBruce Evans# interrupt controller.  This saves about 0.7-1.25 usec for each interrupt.
10189ba0e7c3SBruce Evans# Automatic EOI is documented not to work for for the slave with the
10199ba0e7c3SBruce Evans# original i8259A, but it works for some clones and some integrated
10209ba0e7c3SBruce Evans# versions.
10219ba0e7c3SBruce Evans#
1022b2796687SNate Williams# MAXMEM specifies the amount of RAM on the machine; if this is not
10239bc192deSDavid E. O'Brien# specified, FreeBSD will first read the amount of memory from the CMOS
10249bc192deSDavid E. O'Brien# RAM, so the amount of memory will initially be limited to 64MB or 16MB
10259bc192deSDavid E. O'Brien# depending on the BIOS.  If the BIOS reports 64MB, a memory probe will
10269bc192deSDavid E. O'Brien# then attempt to detect the installed amount of RAM.  If this probe
10279bc192deSDavid E. O'Brien# fails to detect >64MB RAM you will have to use the MAXMEM option.
10289bc192deSDavid E. O'Brien# The amount is in kilobytes, so for a machine with 128MB of RAM, it would
10299bc192deSDavid E. O'Brien# be 131072 (128 * 1024).
1030b2796687SNate Williams#
10315eb46edfSDavid Greenman# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
10325eb46edfSDavid Greenman# reset the CPU for reboot.  This is needed on some systems with broken
10335eb46edfSDavid Greenman# keyboard controllers.
103477959e8eSMarc G. Fournier
10359ac61e92SPeter Wemmoptions 	COMPAT_OLDISA	#Use ISA shims and glue for old drivers
1036f71c01ccSPeter Wemmoptions 	AUTO_EOI_1
103719dde963SPeter Wemm#options 	AUTO_EOI_2
1038f71c01ccSPeter Wemm
1039f71c01ccSPeter Wemmoptions 	MAXMEM="(128*1024)"
104019dde963SPeter Wemm#options 	BROKEN_KEYBOARD_RESET
10413af6b652SDavid Greenman
1042595f6341SPoul-Henning Kamp# Enable support for the kernel PLL to use an external PPS signal,
1043595f6341SPoul-Henning Kamp# under supervision of [x]ntpd(8)
1044a2210fe1SPoul-Henning Kamp# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1045595f6341SPoul-Henning Kamp
1046595f6341SPoul-Henning Kampoptions 	PPS_SYNC
1047595f6341SPoul-Henning Kamp
1048c2906d55SPoul-Henning Kamp# If you see the "calcru: negative time of %ld usec for pid %d (%s)\n"
1049c2906d55SPoul-Henning Kamp# message you probably have some broken sw/hw which disables interrupts
1050c2906d55SPoul-Henning Kamp# for too long.  You can make the system more resistant to this by
1051c2906d55SPoul-Henning Kamp# choosing a high value for NTIMECOUNTER.  The default is 5, there
1052c2906d55SPoul-Henning Kamp# is no upper limit but more than a couple of hundred are not productive.
1053a2210fe1SPoul-Henning Kamp# A better strategy may be to sysctl -w kern.timecounter.method=1
1054c2906d55SPoul-Henning Kamp
10555895e3c8SPeter Wemmoptions 	NTIMECOUNTER=20
1056c2906d55SPoul-Henning Kamp
1057d61e6649SAlexander Langer#
1058d61e6649SAlexander Langer# EISA bus
1059d61e6649SAlexander Langer#
1060d61e6649SAlexander Langer# The EISA bus device is `eisa'.  It provides auto-detection and
1061d61e6649SAlexander Langer# configuration support for all devices on the EISA bus.
1062d61e6649SAlexander Langer
1063d61e6649SAlexander Langerdevice		eisa
1064d61e6649SAlexander Langer
1065d61e6649SAlexander Langer# By default, only 10 EISA slots are probed, since the slot numbers
1066d61e6649SAlexander Langer# above clash with the configuration address space of the PCI subsystem,
1067d61e6649SAlexander Langer# and the EISA probe is not very smart about this.  This is sufficient
1068d61e6649SAlexander Langer# for most machines, but in particular the HP NetServer LC series comes
1069d61e6649SAlexander Langer# with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11,
1070d61e6649SAlexander Langer# thus you need to bump this figure to 12 for them.
1071d61e6649SAlexander Langeroptions 	EISA_SLOTS=12
1072d61e6649SAlexander Langer
1073d61e6649SAlexander Langer#
1074d61e6649SAlexander Langer# MCA bus:
1075d61e6649SAlexander Langer#
1076d61e6649SAlexander Langer# The MCA bus device is `mca'.  It provides auto-detection and
1077d61e6649SAlexander Langer# configuration support for all devices on the MCA bus.
1078d61e6649SAlexander Langer# No hints are required for MCA.
1079d61e6649SAlexander Langer
1080d61e6649SAlexander Langerdevice		mca
1081d61e6649SAlexander Langer
1082d61e6649SAlexander Langer#
1083d61e6649SAlexander Langer# PCI bus & PCI options:
1084d61e6649SAlexander Langer#
1085d61e6649SAlexander Langer# The main PCI bus device is `pci'.  It provides auto-detection and
1086d61e6649SAlexander Langer# configuration support for all devices on the PCI bus, using either
1087d61e6649SAlexander Langer# configuration mode defined in the PCI specification.
1088d61e6649SAlexander Langer
1089d61e6649SAlexander Langerdevice		pci
1090d61e6649SAlexander Langer
1091d61e6649SAlexander Langer# PCI options
1092d61e6649SAlexander Langer#
1093d61e6649SAlexander Langer#options 	PCI_QUIET	#quiets PCI code on chipset settings
1094d61e6649SAlexander Langeroptions 	COMPAT_OLDPCI	#Use PCI shims and glue for old drivers
1095d61e6649SAlexander Langer
1096d61e6649SAlexander Langer
1097d61e6649SAlexander Langer#####################################################################
1098d61e6649SAlexander Langer# HARDWARE DEVICE CONFIGURATION
1099d61e6649SAlexander Langer
1100d61e6649SAlexander Langer# EISA support is available for some device, so they can be auto-probed.
1101d61e6649SAlexander Langer# MicroChannel (MCA) support is available for some devices.
1102d61e6649SAlexander Langer# For ISA the required hints are listed.
1103d61e6649SAlexander Langer# EISA, MCA, PCI and pccard are self identifying buses, so no hints
1104d61e6649SAlexander Langer# are needed.
1105d61e6649SAlexander Langer
1106d61e6649SAlexander Langer#
1107d61e6649SAlexander Langer# Mandatory devices:
1108d61e6649SAlexander Langer#
1109d61e6649SAlexander Langer
111023f7bd17SBrian Somers# The keyboard controller; it controls the keyboard and the PS/2 mouse.
1111f71c01ccSPeter Wemmdevice		atkbdc	1
1112f71c01ccSPeter Wemmhint.atkbdc.0.at="isa"
1113f71c01ccSPeter Wemmhint.atkbdc.0.port="0x060"
11142ad872c5SKazutaka YOKOTA
11152ad872c5SKazutaka YOKOTA# The AT keyboard
1116f71c01ccSPeter Wemmdevice		atkbd
1117f71c01ccSPeter Wemmhint.atkbd.0.at="atkbdc"
1118f71c01ccSPeter Wemmhint.atkbd.0.irq="1"
11192ad872c5SKazutaka YOKOTA
11200a0319c2SKazutaka YOKOTA# Options for atkbd:
11210a0319c2SKazutaka YOKOTAoptions 	ATKBD_DFLT_KEYMAP	# specify the built-in keymap
11220a0319c2SKazutaka YOKOTAmakeoptions	ATKBD_DFLT_KEYMAP="jp.106"
11230a0319c2SKazutaka YOKOTA
11240a0319c2SKazutaka YOKOTA# These options are valid for other keyboard drivers as well.
11250a0319c2SKazutaka YOKOTAoptions 	KBD_DISABLE_KEYMAP_LOAD	# refuse to load a keymap
11260a0319c2SKazutaka YOKOTAoptions 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
11270a0319c2SKazutaka YOKOTA
1128e1b5fc4cSKazutaka YOKOTA# `flags' for atkbd:
1129e1b5fc4cSKazutaka YOKOTA#       0x01    Force detection of keyboard, else we always assume a keyboard
1130e1b5fc4cSKazutaka YOKOTA#       0x02    Don't reset keyboard, useful for some newer ThinkPads
1131e1b5fc4cSKazutaka YOKOTA#       0x04    Old-style (XT) keyboard support, useful for older ThinkPads
1132e1b5fc4cSKazutaka YOKOTA
11332ad872c5SKazutaka YOKOTA# PS/2 mouse
1134f71c01ccSPeter Wemmdevice		psm
1135f71c01ccSPeter Wemmhint.psm.0.at="atkbdc"
1136f71c01ccSPeter Wemmhint.psm.0.irq="12"
11372ad872c5SKazutaka YOKOTA
11382ad872c5SKazutaka YOKOTA# Options for psm:
1139273157daSKazutaka YOKOTAoptions 	PSM_HOOKRESUME		#hook the system resume event, useful
11402ad872c5SKazutaka YOKOTA					#for some laptops
11412ad872c5SKazutaka YOKOTAoptions 	PSM_RESETAFTERSUSPEND	#reset the device at the resume event
11422ad872c5SKazutaka YOKOTA
11432ad872c5SKazutaka YOKOTA# The video card driver.
1144f71c01ccSPeter Wemmdevice		vga
1145f71c01ccSPeter Wemmhint.vga.0.at="isa"
11462ad872c5SKazutaka YOKOTA
1147c619f2acSKazutaka YOKOTA# Options for vga:
1148c619f2acSKazutaka YOKOTA# Try the following option if the mouse pointer is not drawn correctly
1149c619f2acSKazutaka YOKOTA# or font does not seem to be loaded properly.  May cause flicker on
1150c619f2acSKazutaka YOKOTA# some systems.
1151c619f2acSKazutaka YOKOTAoptions 	VGA_ALT_SEQACCESS
1152c619f2acSKazutaka YOKOTA
1153c619f2acSKazutaka YOKOTA# If you can dispense with some vga driver features, you may want to
1154c619f2acSKazutaka YOKOTA# use the following options to save some memory.
11551b1728adSPoul-Henning Kamp#options 	VGA_NO_FONT_LOADING	# don't save/load font
11561b1728adSPoul-Henning Kamp#options 	VGA_NO_MODE_CHANGE	# don't change video modes
1157c619f2acSKazutaka YOKOTA
1158c619f2acSKazutaka YOKOTA# Older video cards may require this option for proper operation.
1159c619f2acSKazutaka YOKOTAoptions 	VGA_SLOW_IOACCESS	# do byte-wide i/o's to TS and GDC regs
1160c619f2acSKazutaka YOKOTA
11616e8394b8SKazutaka YOKOTA# The following option probably won't work with the LCD displays.
11626e8394b8SKazutaka YOKOTAoptions 	VGA_WIDTH90		# support 90 column modes
11636e8394b8SKazutaka YOKOTA
11640a0319c2SKazutaka YOKOTA# To include support for VESA video modes
116577835954SJonathan Lemonoptions 	VESA
11660a0319c2SKazutaka YOKOTA
1167edd5302dSJeroen Ruigrok van der Wervenoptions 	FB_DEBUG		# Frame buffer debugging
1168edd5302dSJeroen Ruigrok van der Wervenoptions 	FB_INSTALL_CDEV		# install a CDEV entry in /dev
1169edd5302dSJeroen Ruigrok van der Werven
11702ad872c5SKazutaka YOKOTA# Splash screen at start up!  Screen savers require this too.
1171f71c01ccSPeter Wemmdevice		splash
11722ad872c5SKazutaka YOKOTA
1173c19da41eSPeter Wemm# The pcvt console driver (vt220 compatible).
1174f71c01ccSPeter Wemmdevice		vt
1175f71c01ccSPeter Wemmhint.vt.0.at="isa"
1176528b8853SKazutaka YOKOTAoptions 	XSERVER			# support for running an X server on vt
1177c19da41eSPeter Wemmoptions 	FAT_CURSOR		# start with block cursor
1178c19da41eSPeter Wemm# This PCVT option is for keyboards such as those used on IBM ThinkPad laptops
1179c19da41eSPeter Wemmoptions 	PCVT_SCANSET=2 		# IBM keyboards are non-std
1180a467384bSJoerg Wunsch# Other PCVT options are documented in pcvt(4).
11815895e3c8SPeter Wemmoptions 	PCVT_24LINESDEF
1182a467384bSJoerg Wunschoptions 	PCVT_CTRL_ALT_DEL
1183a467384bSJoerg Wunschoptions 	PCVT_META_ESC
1184a467384bSJoerg Wunschoptions 	PCVT_NSCREENS=9
1185a467384bSJoerg Wunschoptions 	PCVT_PRETTYSCRNS
1186a467384bSJoerg Wunschoptions 	PCVT_SCREENSAVER
1187a467384bSJoerg Wunschoptions 	PCVT_USEKBDSEC
11885895e3c8SPeter Wemmoptions 	PCVT_VT220KEYB
1189a06da083SHellmuth Michaelisoptions 	PCVT_GREENSAVER
1190c19da41eSPeter Wemm
1191ee16b430SBruce Evans# The syscons console driver (sco color console compatible).
1192f71c01ccSPeter Wemmdevice		sc	1
1193f71c01ccSPeter Wemmhint.sc.0.at="isa"
1194683cbdf4SBruce Evansoptions 	MAXCONS=16		# number of virtual consoles
11956e8394b8SKazutaka YOKOTAoptions 	SC_ALT_MOUSE_IMAGE	# simplified mouse cursor in text mode
11966e8394b8SKazutaka YOKOTAoptions 	SC_DFLT_FONT		# compile font in
1197cc6c2ad0SPeter Wemmmakeoptions	SC_DFLT_FONT=cp850
11986e8394b8SKazutaka YOKOTAoptions 	SC_DISABLE_DDBKEY	# disable `debug' key
1199c4118fc0SKazutaka YOKOTAoptions 	SC_DISABLE_REBOOT	# disable reboot key sequence
12006e8394b8SKazutaka YOKOTAoptions 	SC_HISTORY_SIZE=200	# number of history buffer lines
12016e8394b8SKazutaka YOKOTAoptions 	SC_MOUSE_CHAR=0x3	# char code for text mode mouse cursor
12026e8394b8SKazutaka YOKOTAoptions 	SC_PIXEL_MODE		# add support for the raster text mode
120385e36760SJordan K. Hubbard
12047a88382dSKazutaka YOKOTA# The following options will let you change the default colors of syscons.
12057a88382dSKazutaka YOKOTAoptions 	SC_NORM_ATTR="(FG_GREEN|BG_BLACK)"
12067a88382dSKazutaka YOKOTAoptions 	SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)"
12077a88382dSKazutaka YOKOTAoptions 	SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)"
12087a88382dSKazutaka YOKOTAoptions 	SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)"
12097a88382dSKazutaka YOKOTA
12107a88382dSKazutaka YOKOTA# If you have a two button mouse, you may want to add the following option
12117a88382dSKazutaka YOKOTA# to use the right button of the mouse to paste text.
12127a88382dSKazutaka YOKOTAoptions 	SC_TWOBUTTON_MOUSE
12137a88382dSKazutaka YOKOTA
12146e8394b8SKazutaka YOKOTA# You can selectively disable features in syscons.
12156e8394b8SKazutaka YOKOTAoptions 	SC_NO_CUTPASTE
12166e8394b8SKazutaka YOKOTAoptions 	SC_NO_FONT_LOADING
12176e8394b8SKazutaka YOKOTAoptions 	SC_NO_HISTORY
12186e8394b8SKazutaka YOKOTAoptions 	SC_NO_SYSMOUSE
12192ac8be82SAndreas Schulz
12208a28ce0eSJohn Baldwin# `flags' for sc
12218a28ce0eSJohn Baldwin#	0x80	Put the video card in the VESA 800x600 dots, 16 color mode
12228a28ce0eSJohn Baldwin#	0x100	Probe for a keyboard device periodically if one is not present
12238a28ce0eSJohn Baldwin
1224899266e3SJeroen Ruigrok van der Wervendevice 		tdfx			# Enable 3Dfx Voodoo support
1225899266e3SJeroen Ruigrok van der Wervenoptions 	TDFX_LINUX		# Enable Linuxulator support
1226899266e3SJeroen Ruigrok van der Werven
12276a8d6623SGarrett Wollman#
1228a7674320SMartin Cracauer# The Numeric Processing eXtension driver.  In addition to this, you
1229a7674320SMartin Cracauer# may configure a math emulator (see above).  If your machine has a
1230a7674320SMartin Cracauer# hardware FPU and the kernel configuration includes the npx device
1231a7674320SMartin Cracauer# *and* a math emulator compiled into the kernel, the hardware FPU
1232a7674320SMartin Cracauer# will be used, unless it is found to be broken or unless "flags" to
1233a7674320SMartin Cracauer# npx0 includes "0x08", which requests preference for the emulator.
1234f71c01ccSPeter Wemmdevice		npx
1235f71c01ccSPeter Wemmhint.npx.0.at="nexus"
1236f71c01ccSPeter Wemmhint.npx.0.port="0x0F0"
1237f71c01ccSPeter Wemmhint.npx.0.flags="0x0"
1238f71c01ccSPeter Wemmhint.npx.0.irq="13"
12391fe04850SBruce Evans
124098e9e66cSNate Williams#
12411fe04850SBruce Evans# `flags' for npx0:
1242a7674320SMartin Cracauer#	0x01	don't use the npx registers to optimize bcopy.
1243a7674320SMartin Cracauer#	0x02	don't use the npx registers to optimize bzero.
12441fe04850SBruce Evans#	0x04	don't use the npx registers to optimize copyin or copyout.
1245a7674320SMartin Cracauer#	0x08	use emulator even if hardware FPU is available.
12461fe04850SBruce Evans# The npx registers are normally used to optimize copying and zeroing when
12471fe04850SBruce Evans# all of the following conditions are satisfied:
12485895e3c8SPeter Wemm#	I586_CPU is an option
12491fe04850SBruce Evans#	the cpu is an i586 (perhaps not a Pentium)
12501fe04850SBruce Evans#	the probe for npx0 succeeds
12511fe04850SBruce Evans#	INT 16 exception handling works.
12521fe04850SBruce Evans# Then copying and zeroing using the npx registers is normally 30-100% faster.
12531fe04850SBruce Evans# The flags can be used to control cases where it doesn't work or is slower.
12541fe04850SBruce Evans# Setting them at boot time using userconfig works right (the optimizations
12551fe04850SBruce Evans# are not used until later in the bootstrap when npx0 is attached).
1256784648c6SMartin Cracauer# Flag 0x08 automatically disables the i586 optimized routines.
12571fe04850SBruce Evans#
12581fe04850SBruce Evans
12590da9b781SMike Smith#
12600da9b781SMike Smith# ACPI support using the Intel ACPI Component Architecture reference
12610da9b781SMike Smith# implementation.
12620da9b781SMike Smith#
12630da9b781SMike Smith# ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer
12640da9b781SMike Smith# kernel environment variables to select initial debugging levels for the
12650da9b781SMike Smith# Intel ACPICA code.  (Note that the Intel code must also have USE_DEBUGGER
12660da9b781SMike Smith# defined when it is built).
12670da9b781SMike Smith#
12680da9b781SMike Smithdevice		acpica
12690da9b781SMike Smithoptions		ACPI_DEBUG
12700da9b781SMike Smith
1271b1f12b61STakanori Watanabe# ACPI Experimental Driver
127254dfbb14SPoul-Henning Kamp#device		acpi
127354dfbb14SPoul-Henning Kamp#options 	ACPI_DEBUG
12741653e9c3SMitsuru IWASAKI#!options	ACPI_NO_ENABLE_ON_BOOT
127554dfbb14SPoul-Henning Kamp#options 	AML_DEBUG
1276b1f12b61STakanori Watanabe
12771fe04850SBruce Evans#
1278d61e6649SAlexander Langer# Optional devices:
12796a8d6623SGarrett Wollman#
12806a8d6623SGarrett Wollman
12816a8d6623SGarrett Wollman#
1282d61e6649SAlexander Langer# SCSI host adapters:
12836a8d6623SGarrett Wollman#
1284859244a6SJustin T. Gibbs# adv: All Narrow SCSI bus AdvanSys controllers.
1285859244a6SJustin T. Gibbs# adw: Second Generation AdvanSys controllers including the ADV940UW.
1286d61e6649SAlexander Langer# aha: Adaptec 154x/1535/1640
1287d61e6649SAlexander Langer# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1288d61e6649SAlexander Langer#      19160x/29160x, aic7770/aic78xx
12896d04301dSAlexander Langer# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1290d61e6649SAlexander Langer# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1291d61e6649SAlexander Langer#      such as the Tekram DC-390(T).
1292d61e6649SAlexander Langer# bt:  Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1293d61e6649SAlexander Langer#      BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1294d61e6649SAlexander Langer# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1295d61e6649SAlexander Langer#      ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1296d61e6649SAlexander Langer#      ISP 12160 Ultra3 SCSI,
1297d61e6649SAlexander Langer#      Qlogic ISP 2100 and ISP 2200 Fibre Channel host adapters.
1298ac918c84SMatt Jacob# ispfw: Firmware module for Qlogic host adapters
1299d61e6649SAlexander Langer# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1300ae94720dSNoriaki Mitsunaga# ncv: NCR 53C500 based SCSI host adapters.
1301ae94720dSNoriaki Mitsunaga# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
1302fb91fd69SGerard Roudier# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1303fb91fd69SGerard Roudier#      53C810, 53C810A, 53C815, 53C825,  53C825A, 53C860, 53C875,
1304fb91fd69SGerard Roudier#      53C876, 53C885,  53C895, 53C895A, 53C896,  53C897, 53C1510D,
1305fb91fd69SGerard Roudier#      53C1010-33, 53C1010-66.
1306ae94720dSNoriaki Mitsunaga# stg: TMC 18C30, 18C50 based SCSI host adapters.
1307821c54a1SSergey Babkin# wds: WD7000
1308d61e6649SAlexander Langer
13096a8d6623SGarrett Wollman#
1310d61e6649SAlexander Langer# Note that the order is important in order for Buslogic ISA/EISA cards to be
13116a8d6623SGarrett Wollman# probed correctly.
13126a8d6623SGarrett Wollman#
1313f71c01ccSPeter Wemmdevice		bt
1314f71c01ccSPeter Wemmhint.bt.0.at="isa"
1315f71c01ccSPeter Wemmhint.bt.0.port="0x330"
1316f71c01ccSPeter Wemmdevice		adv
1317f71c01ccSPeter Wemmhint.adv.0.at="isa"
1318c9953c3bSPeter Wemmdevice		adw
1319f71c01ccSPeter Wemmdevice		aha	1
1320f71c01ccSPeter Wemmhint.aha.0.at="isa"
1321f71c01ccSPeter Wemmdevice		aic
1322f71c01ccSPeter Wemmhint.aic.0.at="isa"
1323d61e6649SAlexander Langerdevice		ahc
1324d61e6649SAlexander Langerdevice		amd
1325d61e6649SAlexander Langerdevice		isp
1326d61e6649SAlexander Langerdevice		ispfw
1327d61e6649SAlexander Langerdevice		ncr
1328ae94720dSNoriaki Mitsunagadevice		ncv
1329ae94720dSNoriaki Mitsunagadevice		nsp
1330d61e6649SAlexander Langerdevice		sym
1331ae94720dSNoriaki Mitsunagadevice		stg
1332918dbed3SNoriaki Mitsunagahint.stg.0.at="isa"
1333918dbed3SNoriaki Mitsunagahint.stg.0.port="0x140"
1334918dbed3SNoriaki Mitsunagahint.stg.0.port="11"
1335821c54a1SSergey Babkindevice		wds
1336821c54a1SSergey Babkinhint.wds.0.at="isa"
1337821c54a1SSergey Babkinhint.wds.0.port="0x350"
1338821c54a1SSergey Babkinhint.wds.0.irq="11"
1339821c54a1SSergey Babkinhint.wds.0.drq="6"
1340d61e6649SAlexander Langer
1341d61e6649SAlexander Langer# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1342d61e6649SAlexander Langer# controllers that have it configured only if this option is set. Unfortunately,
1343d61e6649SAlexander Langer# this doesn't work on some motherboards, which prevents it from being the
1344d61e6649SAlexander Langer# default.
1345d61e6649SAlexander Langeroptions 	AHC_ALLOW_MEMIO
1346d61e6649SAlexander Langer
1347fac70739SJeroen Ruigrok van der Werven# Enable diagnostic sequencer code.
1348fac70739SJeroen Ruigrok van der Wervenoptions 	AHC_DEBUG_SEQUENCER
1349fac70739SJeroen Ruigrok van der Werven
1350fac70739SJeroen Ruigrok van der Werven# Dump the contents of the ahc controller configuration PROM.
1351fac70739SJeroen Ruigrok van der Wervenoptions 	AHC_DUMP_EEPROM
1352fac70739SJeroen Ruigrok van der Werven
1353fac70739SJeroen Ruigrok van der Werven# Bitmap of units to enable targetmode operations.
1354fac70739SJeroen Ruigrok van der Wervenoptions 	AHC_TMODE_ENABLE
1355fac70739SJeroen Ruigrok van der Werven
1356d61e6649SAlexander Langer# The adw driver will attempt to use memory mapped I/O for all PCI
1357d61e6649SAlexander Langer# controllers that have it configured only if this option is set.
1358d61e6649SAlexander Langeroptions 	ADW_ALLOW_MEMIO
1359d61e6649SAlexander Langer
1360d61e6649SAlexander Langer# Options used in dev/isp/ (Qlogic SCSI/FC driver).
1361d61e6649SAlexander Langer#
1362d61e6649SAlexander Langer#	ISP_TARGET_MODE		-	enable target mode operation
1363d61e6649SAlexander Langer#
1364d61e6649SAlexander Langer#options 	ISP_TARGET_MODE=1
1365d61e6649SAlexander Langer
1366d61e6649SAlexander Langer# Options used in dev/sym/ (Symbios SCSI driver).
1367d61e6649SAlexander Langer#options 	SYM_SETUP_LP_PROBE_MAP	#-Low Priority Probe Map (bits)
1368d61e6649SAlexander Langer					# Allows the ncr to take precedence
1369d61e6649SAlexander Langer					# 1 (1<<0) -> 810a, 860
1370d61e6649SAlexander Langer					# 2 (1<<1) -> 825a, 875, 885, 895
1371d61e6649SAlexander Langer					# 4 (1<<2) -> 895a, 896, 1510d
1372d61e6649SAlexander Langer#options 	SYM_SETUP_SCSI_DIFF	#-HVD support for 825a, 875, 885
1373d61e6649SAlexander Langer					# disabled:0 (default), enabled:1
1374d61e6649SAlexander Langer#options 	SYM_SETUP_PCI_PARITY	#-PCI parity checking
1375d61e6649SAlexander Langer					# disabled:0, enabled:1 (default)
1376d61e6649SAlexander Langer#options 	SYM_SETUP_MAX_LUN	#-Number of LUNs supported
1377d61e6649SAlexander Langer					# default:8, range:[1..64]
13786a8d6623SGarrett Wollman
1379ef137fd3SMike Smith# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
1380ef137fd3SMike Smith# controllers (SmartRAID V and VI and later).
1381ef137fd3SMike Smith# These controllers require the CAM infrastructure.
1382ef137fd3SMike Smith#
1383ef137fd3SMike Smithdevice		asr
1384ef137fd3SMike Smith
1385153cbcc3SMike Smith# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1386153cbcc3SMike Smith# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1387153cbcc3SMike Smith# The DPT controllers are commonly re-licensed under other brand-names -
1388153cbcc3SMike Smith# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1389153cbcc3SMike Smith# Compaq are actually DPT controllers.
1390153cbcc3SMike Smith#
1391153cbcc3SMike Smith# See src/sys/dev/dpt for debugging and other subtle options.
1392153cbcc3SMike Smith#   DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1393153cbcc3SMike Smith#                           instruments are enabled.  The tools in
1394153cbcc3SMike Smith#                           /usr/sbin/dpt_* assume these to be enabled.
1395153cbcc3SMike Smith#   DPT_HANDLE_TIMEOUTS     Normally device timeouts are handled by the DPT.
1396153cbcc3SMike Smith#                           If you ant the driver to handle timeouts, enable
1397153cbcc3SMike Smith#                           this option.  If your system is very busy, this
1398153cbcc3SMike Smith#                           option will create more trouble than solve.
1399153cbcc3SMike Smith#   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
1400153cbcc3SMike Smith#                           wait when timing out with the above option.
1401153cbcc3SMike Smith#  DPT_DEBUG_xxxx           These are controllable from sys/dev/dpt/dpt.h
1402153cbcc3SMike Smith#  DPT_LOST_IRQ             When enabled, will try, once per second, to catch
1403153cbcc3SMike Smith#                           any interrupt that got lost.  Seems to help in some
1404153cbcc3SMike Smith#                           DPT-firmware/Motherboard combinations.  Minimal
1405153cbcc3SMike Smith#                           cost, great benefit.
1406153cbcc3SMike Smith#  DPT_RESET_HBA            Make "reset" actually reset the controller
1407153cbcc3SMike Smith#                           instead of fudging it.  Only enable this if you
1408153cbcc3SMike Smith#			    are 100% certain you need it.
1409153cbcc3SMike Smith
1410153cbcc3SMike Smithdevice		dpt
1411153cbcc3SMike Smith
1412153cbcc3SMike Smith# DPT options
1413153cbcc3SMike Smith#!CAM# options 	DPT_MEASURE_PERFORMANCE
1414153cbcc3SMike Smith#!CAM# options 	DPT_HANDLE_TIMEOUTS
1415153cbcc3SMike Smithoptions 	DPT_TIMEOUT_FACTOR=4
1416153cbcc3SMike Smithoptions 	DPT_LOST_IRQ
1417153cbcc3SMike Smithoptions 	DPT_RESET_HBA
1418153cbcc3SMike Smithoptions 	DPT_ALLOW_MEMIO
1419153cbcc3SMike Smith
1420153cbcc3SMike Smith#
1421153cbcc3SMike Smith# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1422153cbcc3SMike Smith# firmware.  These controllers have a SCSI-like interface, and require
1423153cbcc3SMike Smith# the CAM infrastructure.
1424153cbcc3SMike Smith#
1425153cbcc3SMike Smithdevice		mly
1426153cbcc3SMike Smith
14278b89ef0aSSøren Schmidt#
142835863739SMike Smith# Adaptec FSA RAID controllers, including integrated DELL controllers,
142935863739SMike Smith# the Dell PERC 2/QC and the HP NetRAID-4M
1430ead270f1SMike Smith#
1431ead270f1SMike Smith# AAC_COMPAT_LINUX	Include code to support Linux-binary management
1432ead270f1SMike Smith#			utilities (requires Linux compatibility
1433ead270f1SMike Smith#			support).
1434ead270f1SMike Smith#
143535863739SMike Smithdevice		aac
143635863739SMike Smith
143735863739SMike Smith#
14385e3488e3SJonathan Lemon# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers.  Only
14395e3488e3SJonathan Lemon# one entry is needed; the code will find and configure all supported
14405e3488e3SJonathan Lemon# controllers.
144113066c5fSJonathan Lemon#
14425e3488e3SJonathan Lemondevice		ida		# Compaq Smart RAID
1443c9953c3bSPeter Wemmdevice		mlx		# Mylex DAC960
1444c9953c3bSPeter Wemmdevice		amr		# AMI MegaRAID
14456ac4727aSMike Smith
14466ac4727aSMike Smith#
14476d04301dSAlexander Langer# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
14486d04301dSAlexander Langer# devices. You only need one "device ata" for it to find all
14496d04301dSAlexander Langer# PCI and PC Card ATA/ATAPI devices on modern machines.
1450c9953c3bSPeter Wemmdevice		ata
1451c9953c3bSPeter Wemmdevice		atadisk		# ATA disk drives
1452c9953c3bSPeter Wemmdevice		atapicd		# ATAPI CDROM drives
1453c9953c3bSPeter Wemmdevice		atapifd		# ATAPI floppy drives
1454c9953c3bSPeter Wemmdevice		atapist		# ATAPI tape drives
145574d8e840SSøren Schmidt
14568b89ef0aSSøren Schmidt#
14576d04301dSAlexander Langer# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
14586d04301dSAlexander Langerhint.ata.0.at="isa"
14596d04301dSAlexander Langerhint.ata.0.port="0x1f0"
14606d04301dSAlexander Langerhint.ata.0.irq="14"
14616d04301dSAlexander Langerhint.ata.1.at="isa"
14626d04301dSAlexander Langerhint.ata.1.port="0x170"
14636d04301dSAlexander Langerhint.ata.1.irq="15"
14646d04301dSAlexander Langer
14656d04301dSAlexander Langer#
1466000da71aSSøren Schmidt# The following options are valid on the ATA driver:
1467000da71aSSøren Schmidt#
1468000da71aSSøren Schmidt# ATA_STATIC_ID:	controller numbering is static ie depends on location
146974d8e840SSøren Schmidt#			else the device numbers are dynamically allocated.
147074d8e840SSøren Schmidt# ATA_ENABLE_ATAPI_DMA:	enable DMA on ATAPI device, since many ATAPI devices
147174d8e840SSøren Schmidt#			claim to support DMA but doesn't actually work, this
147274d8e840SSøren Schmidt#			is not enabled as default.
1473a9763f0aSSøren Schmidt# ATA_ENABLE_TAGS	enable tagged queuing on ATA disks that supports it.
147474d8e840SSøren Schmidt
147574d8e840SSøren Schmidtoptions 	ATA_STATIC_ID
147674d8e840SSøren Schmidtoptions 	ATA_ENABLE_ATAPI_DMA
1477a9763f0aSSøren Schmidtoptions 	ATA_ENABLE_TAGS
147874d8e840SSøren Schmidt
14798b89ef0aSSøren Schmidt#
14806d04301dSAlexander Langer# Standard floppy disk controllers and floppy tapes, supports
14816d04301dSAlexander Langer# the Y-E DATA External FDD (PC Card)
14826a8d6623SGarrett Wollman#
1483f71c01ccSPeter Wemmdevice		fdc
1484f71c01ccSPeter Wemmhint.fdc.0.at="isa"
1485f71c01ccSPeter Wemmhint.fdc.0.port="0x3F0"
1486f71c01ccSPeter Wemmhint.fdc.0.irq="6"
1487f71c01ccSPeter Wemmhint.fdc.0.drq="2"
148885827d9cSJoerg Wunsch#
1489d2fb4892SJoerg Wunsch# FDC_DEBUG enables floppy debugging.  Since the debug output is huge, you
1490d2fb4892SJoerg Wunsch# gotta turn it actually on by setting the variable fd_debug with DDB,
1491d2fb4892SJoerg Wunsch# however.
1492d2fb4892SJoerg Wunschoptions 	FDC_DEBUG
1493d2fb4892SJoerg Wunsch#
1494f71c01ccSPeter Wemm# Activate this line if you happen to have an Insight floppy tape.
1495f71c01ccSPeter Wemm# Probing them proved to be dangerous for people with floppy disks only,
1496f71c01ccSPeter Wemm# so it's "hidden" behind a flag:
1497f71c01ccSPeter Wemm#hint.fdc.0.flags="1"
149885827d9cSJoerg Wunsch
1499f71c01ccSPeter Wemm# Specify floppy devices
1500f71c01ccSPeter Wemmhint.fd.0.at="fdc0"
1501f71c01ccSPeter Wemmhint.fd.0.drive="0"
1502f71c01ccSPeter Wemmhint.fd.1.at="fdc0"
1503f71c01ccSPeter Wemmhint.fd.1.drive="1"
150485827d9cSJoerg Wunsch
1505d4ebee28SPoul-Henning Kamp# M-systems DiskOnchip products see src/sys/contrib/dev/fla/README
1506f71c01ccSPeter Wemmdevice		fla
1507f71c01ccSPeter Wemmhint.fla.0.at="isa"
1508d4ebee28SPoul-Henning Kamp
15096a8d6623SGarrett Wollman#
1510d61e6649SAlexander Langer# Other standard PC hardware:
15116a8d6623SGarrett Wollman#
15126a8d6623SGarrett Wollman# mse: Logitech and ATI InPort bus mouse ports
15136d04301dSAlexander Langer# sio: serial ports (see sio(4)), including support for various
15146d04301dSAlexander Langer#      PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf)
15156a8d6623SGarrett Wollman
1516f71c01ccSPeter Wemmdevice		mse
1517f71c01ccSPeter Wemmhint.mse.0.at="isa"
1518f71c01ccSPeter Wemmhint.mse.0.port="0x23c"
1519f71c01ccSPeter Wemmhint.mse.0.irq="5"
1520975c53c7SDoug Rabson
1521f71c01ccSPeter Wemmdevice		sio
1522f71c01ccSPeter Wemmhint.sio.0.at="isa"
1523f71c01ccSPeter Wemmhint.sio.0.port="0x3F8"
1524f71c01ccSPeter Wemmhint.sio.0.flags="0x10"
1525f71c01ccSPeter Wemmhint.sio.0.irq="4"
15269546766aSBruce Evans
15279546766aSBruce Evans#
15289546766aSBruce Evans# `flags' for serial drivers that support consoles (only for sio now):
15299546766aSBruce Evans#	0x10	enable console support for this unit.  The other console flags
15309546766aSBruce Evans#		are ignored unless this is set.  Enabling console support does
15319546766aSBruce Evans#		not make the unit the preferred console - boot with -h or set
15329546766aSBruce Evans#		the 0x20 flag for that.  Currently, at most one unit can have
15339546766aSBruce Evans#		console support; the first one (in config file order) with
15349546766aSBruce Evans#		this flag set is preferred.  Setting this flag for sio0 gives
15359546766aSBruce Evans#		the old behaviour.
15369546766aSBruce Evans#	0x20	force this unit to be the console (unless there is another
15379546766aSBruce Evans#		higher priority console).  This replaces the COMCONSOLE option.
15389546766aSBruce Evans#	0x40	reserve this unit for low level console operations.  Do not
153904fb8e53SAlexander Langer#		access the device in any normal way.
1540a7674320SMartin Cracauer#	0x80	use this port for serial line gdb support in ddb.
15419546766aSBruce Evans#
15426a796ce0SJohn-Mark Gurney# PnP `flags' (set via userconfig using pnp x flags y)
15436a796ce0SJohn-Mark Gurney#	0x1	disable probing of this device.  Used to prevent your modem
15446a796ce0SJohn-Mark Gurney#		from being attached as a PnP modem.
15456a796ce0SJohn-Mark Gurney#
15469546766aSBruce Evans
15479546766aSBruce Evans# Options for serial drivers that support consoles (only for sio now):
15489546766aSBruce Evansoptions 	BREAK_TO_DEBUGGER	#a BREAK on a comconsole goes to
15499546766aSBruce Evans					#DDB, if available.
15505ea6cb03SPaul Trainaoptions 	CONSPEED=9600		#default speed for serial console (default 9600)
15516a8d6623SGarrett Wollman
155226b6ea69SPaul Saab# Solaris implements a new BREAK which is initiated by a character
155326b6ea69SPaul Saab# sequence CR ~ ^b which is similar to a familiar pattern used on
155426b6ea69SPaul Saab# Sun servers by the Remote Console.
155526b6ea69SPaul Saaboptions 	ALT_BREAK_TO_DEBUGGER
155626b6ea69SPaul Saab
15576a8d6623SGarrett Wollman# Options for sio:
1558768fd661SBruce Evansoptions 	COM_ESP			#code for Hayes ESP
15599ba0e7c3SBruce Evansoptions 	COM_MULTIPORT		#code for some cards with shared IRQs
15606a8d6623SGarrett Wollman
156196b89afcSBruce Evans# Other flags for sio that aren't documented in the man page.
156296b89afcSBruce Evans#	0x20000	enable hardware RTS/CTS and larger FIFOs.  Only works for
156396b89afcSBruce Evans#		ST16650A-compatible UARTs.
156496b89afcSBruce Evans
15656a8d6623SGarrett Wollman#
1566d61e6649SAlexander Langer# Network interfaces:
15676a8d6623SGarrett Wollman#
1568d61e6649SAlexander Langer# MII bus support is required for some PCI 10/100 ethernet NICs,
1569d61e6649SAlexander Langer# namely those which use MII-compliant transceivers or implement
1570d61e6649SAlexander Langer# tranceiver control interfaces that operate like an MII. Adding
1571d61e6649SAlexander Langer# "device miibus0" to the kernel config pulls in support for
1572d61e6649SAlexander Langer# the generic miibus API and all of the PHY drivers, including a
1573d61e6649SAlexander Langer# generic one for PHYs that aren't specifically handled by an
1574d61e6649SAlexander Langer# individual driver.
1575d61e6649SAlexander Langerdevice		miibus
1576d61e6649SAlexander Langer
1577d61e6649SAlexander Langer# an:   Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1578d61e6649SAlexander Langer#       PCI and ISA varieties.
1579d61e6649SAlexander Langer# ar:   Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver
1580d61e6649SAlexander Langer#       (requires sppp)
15816d04301dSAlexander Langer# awi:  Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and
15826d04301dSAlexander Langer#       Harris (Intersil) Chipset with PCnetMobile firmware by AMD.
1583b16d163dSMike Smith# cs:   IBM Etherjet and other Crystal Semi CS89x0-based adapters
158483401efaSGarrett Wollman# cx:   Cronyx/Sigma multiport sync/async (with Cisco or PPP framing)
1585d61e6649SAlexander Langer# dc:   Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1586d61e6649SAlexander Langer#       and various workalikes including:
1587d61e6649SAlexander Langer#       the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1588d61e6649SAlexander Langer#       AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1589d61e6649SAlexander Langer#       82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1590d61e6649SAlexander Langer#       and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1591d61e6649SAlexander Langer#       replaces the old al, ax, dm, pn and mx drivers.  List of brands:
1592d61e6649SAlexander Langer#       Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1593d61e6649SAlexander Langer#       SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1594d61e6649SAlexander Langer#       LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1595d61e6649SAlexander Langer#       KNE110TX.
1596d61e6649SAlexander Langer# de:   Digital Equipment DC21040
15976a8d6623SGarrett Wollman# ed:   Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
15986d04301dSAlexander Langer#       HP PC Lan+, various PC Card devices (refer to etc/defauls/pccard.conf)
15996a8d6623SGarrett Wollman# el:   3Com 3C501 (slow!)
1600855e2f19SAlexander Langer# ep:   3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
16016d04301dSAlexander Langer#       and PC Card devices using these chipsets.
16026d04301dSAlexander Langer# ex:   Intel EtherExpress Pro/10 and other i82595-based adapters,
16036d04301dSAlexander Langer#       Olicom Ethernet PC Card devices.
16041a7c583cSGarrett Wollman# fe:   Fujitsu MB86960A/MB86965A Ethernet
1605d61e6649SAlexander Langer# fea:  DEC DEFEA EISA FDDI adapter
1606d61e6649SAlexander Langer# fpa:  Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1607d61e6649SAlexander Langer# fxp:  Intel EtherExpress Pro/100B
1608d61e6649SAlexander Langer# ie:   AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210;
1609d61e6649SAlexander Langer#       Intel EtherExpress
16106a8d6623SGarrett Wollman# le:   Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
16116a8d6623SGarrett Wollman#       DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
1612d61e6649SAlexander Langer# lnc:  Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 and
1613d61e6649SAlexander Langer#       Am79C960)
1614d61e6649SAlexander Langer# oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133
1615d61e6649SAlexander Langer#       (no hints needed).
1616d61e6649SAlexander Langer#       Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140,
1617d61e6649SAlexander Langer#       OC-3141, OC-3540, OC-3250
161830cfb5b6SJoerg Wunsch# rdp:  RealTek RTL 8002-based pocket ethernet adapters
161941f7d2d5SBill Paul# pcn:	Support for PCI fast ethernet adapters based on the AMD Am79c97x
162041f7d2d5SBill Paul#	chipsets, including the PCnet/FAST, PCnet/FAST+, PCnet/PRO and
162141f7d2d5SBill Paul#	PCnet/Home. These were previously handled by the lnc driver (and
162241f7d2d5SBill Paul#	still will be if you leave this driver out of the kernel).
1623d61e6649SAlexander Langer# rl:   Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1624d61e6649SAlexander Langer#       chipset.  Note that the RealTek driver defaults to using programmed
1625d61e6649SAlexander Langer#       I/O to do register accesses because memory mapped mode seems to cause
1626d61e6649SAlexander Langer#       severe lockups on SMP hardware.  This driver also supports the
1627d61e6649SAlexander Langer#       Accton EN1207D `Cheetah' adapter, which uses a chip called
1628d61e6649SAlexander Langer#       the MPX 5030/5038, which is either a RealTek in disguise or a
1629d61e6649SAlexander Langer#       RealTek workalike.  Note that the D-Link DFE-530TX+ uses the RealTek
1630d61e6649SAlexander Langer#       chipset and is supported by this driver, not the 'vr' driver.
1631d61e6649SAlexander Langer# sf:   Support for Adaptec Duralink PCI fast ethernet adapters based on the
1632d61e6649SAlexander Langer#       Adaptec AIC-6915 "starfire" controller.
1633d61e6649SAlexander Langer#       This includes dual and quad port cards, as well as one 100baseFX card.
1634d61e6649SAlexander Langer#       Most of these are 64-bit PCI devices, except for one single port
1635d61e6649SAlexander Langer#       card which is 32-bit.
1636b2ca5572SAlexander Langer# sis:  Support for NICs based on the Silicon Integrated Systems SiS 900,
1637b2ca5572SAlexander Langer#       SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1638d61e6649SAlexander Langer# sk:   Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1639d61e6649SAlexander Langer#       This includes the SK-9841 and SK-9842 single port cards (single mode
1640d61e6649SAlexander Langer#       and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1641d61e6649SAlexander Langer#       (also single mode and multimode).
1642d61e6649SAlexander Langer#       The driver will autodetect the number of ports on the card and
1643d61e6649SAlexander Langer#       attach each one as a separate network interface.
16446d04301dSAlexander Langer# sn:   Support for ISA and PC Card Ethernet devices using the
16456d04301dSAlexander Langer#       SMC91C90/92/94/95 chips.
1646d805b866SJohn Hay# sr:   RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
1647d61e6649SAlexander Langer# ste:  Sundance Technologies ST201 PCI fast ethernet controller, includes
1648d61e6649SAlexander Langer#       the D-Link DFE-550TX.
1649d61e6649SAlexander Langer# ti:   Support for PCI gigabit ethernet NICs based on the Alteon Networks
1650d61e6649SAlexander Langer#       Tigon 1 and Tigon 2 chipsets.  This includes the Alteon AceNIC, the
1651d61e6649SAlexander Langer#       3Com 3c985, the Netgear GA620 and various others.  Note that you will
1652d61e6649SAlexander Langer#       probably want to bump up NMBCLUSTERS a lot to use this driver.
1653d61e6649SAlexander Langer# tl:   Support for the Texas Instruments TNETE100 series 'ThunderLAN'
1654d61e6649SAlexander Langer#       cards and integrated ethernet controllers.  This includes several
1655d61e6649SAlexander Langer#       Compaq Netelligent 10/100 cards and the built-in ethernet controllers
1656d61e6649SAlexander Langer#       in several Compaq Prosignia, Proliant and Deskpro systems.  It also
1657d61e6649SAlexander Langer#       supports several Olicom 10Mbps and 10/100 boards.
1658eed59f52SSemen Ustimenko# tx:   SMC 9432 TX, BTX and TX_2 cards. (SMC EtherPower II serie)
1659d61e6649SAlexander Langer# vr:   Support for various fast ethernet adapters based on the VIA
1660d61e6649SAlexander Langer#       Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
1661d61e6649SAlexander Langer#       including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1662d61e6649SAlexander Langer#       Technologies PN102TX, and the AOpen/Acer ALN-320.
1663d61e6649SAlexander Langer# vx:   3Com 3C590 and 3C595
1664d61e6649SAlexander Langer# wb:   Support for fast ethernet adapters based on the Winbond W89C840F chip.
1665d61e6649SAlexander Langer#       Note: this is not the same as the Winbond W89C940F, which is a
1666d61e6649SAlexander Langer#       NE2000 clone.
166798d46ad0SMike Smith# wl:   Lucent Wavelan (ISA card only).
166831a08ab0SBill Paul# wi:   Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
16695f0d0590SPeter Wemm#       the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
16705f0d0590SPeter Wemm#       bridge with a PCMCIA adapter plugged into it.
1671d61e6649SAlexander Langer# wx:   Intel Gigabit Ethernet PCI card (`Wiseman')
16726d04301dSAlexander Langer# xe:   Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
16736d04301dSAlexander Langer#       Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
16746d04301dSAlexander Langer#       Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
1675d61e6649SAlexander Langer# xl:   Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
1676d61e6649SAlexander Langer#       Etherlink XL cards and integrated controllers.  This includes the
1677d61e6649SAlexander Langer#       integrated 3c905B-TX chips in certain Dell Optiplex and Dell
1678d61e6649SAlexander Langer#       Precision desktop machines and the integrated 3c905-TX chips
1679d61e6649SAlexander Langer#       in Dell Latitude laptop docking stations.
1680d61e6649SAlexander Langer#       Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
1681d61e6649SAlexander Langer
1682d61e6649SAlexander Langer# Order for ISA/EISA devices is important here
1683d61e6649SAlexander Langer
1684f71c01ccSPeter Wemmdevice		ar	1
1685f71c01ccSPeter Wemmhint.ar.0.at="isa"
1686f71c01ccSPeter Wemmhint.ar.0.port="0x300"
1687f71c01ccSPeter Wemmhint.ar.0.irq="10"
168842b04349SPeter Wemmhint.ar.0.maddr="0xd0000"
1689f71c01ccSPeter Wemmdevice		cs
1690f71c01ccSPeter Wemmhint.cs.0.at="isa"
1691f71c01ccSPeter Wemmhint.cs.0.port="0x300"
1692f71c01ccSPeter Wemmdevice		cx	1
1693f71c01ccSPeter Wemmhint.cx.0.at="isa"
1694f71c01ccSPeter Wemmhint.cx.0.port="0x240"
1695f71c01ccSPeter Wemmhint.cx.0.irq="15"
1696f71c01ccSPeter Wemmhint.cx.0.drq="7"
1697f71c01ccSPeter Wemmdevice		ed
1698f71c01ccSPeter Wemmhint.ed.0.at="isa"
1699f71c01ccSPeter Wemmhint.ed.0.port="0x280"
1700f71c01ccSPeter Wemmhint.ed.0.irq="5"
170142b04349SPeter Wemmhint.ed.0.maddr="0xd8000"
1702f71c01ccSPeter Wemmdevice		el	1
1703f71c01ccSPeter Wemmhint.el.0.at="isa"
1704f71c01ccSPeter Wemmhint.el.0.port="0x300"
1705f71c01ccSPeter Wemmhint.el.0.irq="9"
1706c9953c3bSPeter Wemmdevice		ep
1707c9953c3bSPeter Wemmdevice		ex
1708f71c01ccSPeter Wemmdevice		fe	1
1709edd5302dSJeroen Ruigrok van der Wervenoptions 	FE_8BIT_SUPPORT		# LAC-98 support
1710f71c01ccSPeter Wemmhint.fe.0.at="isa"
1711f71c01ccSPeter Wemmhint.fe.0.port="0x300"
1712d61e6649SAlexander Langerdevice		fea
1713f71c01ccSPeter Wemmdevice		ie	2
1714f71c01ccSPeter Wemmhint.ie.0.at="isa"
1715f71c01ccSPeter Wemmhint.ie.0.port="0x300"
1716f71c01ccSPeter Wemmhint.ie.0.irq="5"
171742b04349SPeter Wemmhint.ie.0.maddr="0xd0000"
1718f71c01ccSPeter Wemmhint.ie.1.at="isa"
1719f71c01ccSPeter Wemmhint.ie.1.port="0x360"
1720f71c01ccSPeter Wemmhint.ie.1.irq="7"
172142b04349SPeter Wemmhint.ie.1.maddr="0xd0000"
1722f71c01ccSPeter Wemmdevice		le	1
1723f71c01ccSPeter Wemmhint.le.0.at="isa"
1724f71c01ccSPeter Wemmhint.le.0.port="0x300"
1725f71c01ccSPeter Wemmhint.le.0.irq="5"
172642b04349SPeter Wemmhint.le.0.maddr="0xd0000"
1727f71c01ccSPeter Wemmdevice		lnc	1
1728f71c01ccSPeter Wemmhint.lnc.0.at="isa"
1729f71c01ccSPeter Wemmhint.lnc.0.port="0x280"
1730f71c01ccSPeter Wemmhint.lnc.0.irq="10"
1731f71c01ccSPeter Wemmhint.lnc.0.drq="0"
1732f71c01ccSPeter Wemmdevice		rdp	1
1733f71c01ccSPeter Wemmhint.rdp.0.at="isa"
1734f71c01ccSPeter Wemmhint.rdp.0.port="0x378"
1735f71c01ccSPeter Wemmhint.rdp.0.irq="7"
1736f71c01ccSPeter Wemmhint.rdp.0.flags="2"
1737f71c01ccSPeter Wemmdevice		sr	1
1738f71c01ccSPeter Wemmhint.sr.0.at="isa"
1739f71c01ccSPeter Wemmhint.sr.0.port="0x300"
1740f71c01ccSPeter Wemmhint.sr.0.irq="5"
174142b04349SPeter Wemmhint.sr.0.maddr="0xd0000"
1742f71c01ccSPeter Wemmdevice		sn
1743f71c01ccSPeter Wemmhint.sn.0.at="isa"
1744f71c01ccSPeter Wemmhint.sn.0.port="0x300"
1745f71c01ccSPeter Wemmhint.sn.0.irq="10"
1746c9953c3bSPeter Wemmdevice		an
17470d5c223dSWarner Loshdevice		awi
17480d5c223dSWarner Loshdevice		wi
17493476cdb9SMike Smithoptions 	WLCACHE		# enables the signal-strength cache
17503476cdb9SMike Smithoptions 	WLDEBUG		# enables verbose debugging output
1751f71c01ccSPeter Wemmdevice		wl	1
1752f71c01ccSPeter Wemmhint.wl.0.at="isa"
1753f71c01ccSPeter Wemmhint.wl.0.port="0x300"
17540d5c223dSWarner Loshdevice		xe
1755648c711bSPoul-Henning Kamp
1756f71c01ccSPeter Wemmdevice		oltr
1757f71c01ccSPeter Wemmoptions 	OLTR_NO_BULLSEYE_MAC
1758f71c01ccSPeter Wemmoptions 	OLTR_NO_HAWKEYE_MAC
1759f71c01ccSPeter Wemmoptions 	OLTR_NO_TMS_MAC
1760f71c01ccSPeter Wemmhint.oltr.0.at="isa"
1761722012ccSJulian Elischer
1762d61e6649SAlexander Langer# PCI Ethernet NICs that use the common MII bus controller code.
1763d61e6649SAlexander Langerdevice		dc		# DEC/Intel 21143 and various workalikes
1764d61e6649SAlexander Langerdevice		rl		# RealTek 8129/8139
176541f7d2d5SBill Pauldevice		pcn		# AMD Am79C79x PCI 10/100 NICs
1766d61e6649SAlexander Langerdevice		sf		# Adaptec AIC-6915 (``Starfire'')
1767d61e6649SAlexander Langerdevice		sis		# Silicon Integrated Systems SiS 900/SiS 7016
1768d61e6649SAlexander Langerdevice		ste		# Sundance ST201 (D-Link DFE-550TX)
1769d61e6649SAlexander Langerdevice		tl		# Texas Instruments ThunderLAN
1770eed59f52SSemen Ustimenkodevice		tx		# SMC EtherPower II (83c170 ``EPIC'')
1771d61e6649SAlexander Langerdevice		vr		# VIA Rhine, Rhine II
1772d61e6649SAlexander Langerdevice		wb		# Winbond W89C840F
1773d61e6649SAlexander Langerdevice		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
1774d61e6649SAlexander Langer
1775d61e6649SAlexander Langer# PCI Ethernet NICs.
1776d61e6649SAlexander Langerdevice		de		# DEC/Intel DC21x4x (``Tulip'')
1777d61e6649SAlexander Langerdevice		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
1778c7ba4194SWarner Loshdevice		vx		# 3Com 3c590, 3c595 (``Vortex'')
1779d61e6649SAlexander Langer
1780d61e6649SAlexander Langer# PCI Gigabit & FDDI NICs.
1781d61e6649SAlexander Langerdevice		sk
1782d61e6649SAlexander Langerdevice		ti
1783d61e6649SAlexander Langerdevice		wx
1784d61e6649SAlexander Langerdevice		fpa	1
1785d61e6649SAlexander Langer
178668713f97SKenjiro Cho#
178744b5247dSKenjiro Cho# ATM related options (Cranor version)
178844b5247dSKenjiro Cho# (note: this driver cannot be used with the HARP ATM stack)
178968713f97SKenjiro Cho#
179068713f97SKenjiro Cho# The `en' device provides support for Efficient Networks (ENI)
179168713f97SKenjiro Cho# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
179268713f97SKenjiro Cho#
1793f71c01ccSPeter Wemm# atm device provides generic atm functions and is required for
179468713f97SKenjiro Cho# atm devices.
17953cbceb82SKenjiro Cho# NATM enables the netnatm protocol family that can be used to
179668713f97SKenjiro Cho# bypass TCP/IP.
179768713f97SKenjiro Cho#
179868713f97SKenjiro Cho# the current driver supports only PVC operations (no atm-arp, no multicast).
179968713f97SKenjiro Cho# for more details, please read the original documents at
180098a44096SSheldon Hearn# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
180168713f97SKenjiro Cho#
1802f71c01ccSPeter Wemmdevice		atm
180344b5247dSKenjiro Chodevice		en
18043cbceb82SKenjiro Chooptions 	NATM			#native ATM
1805f4567b9cSJulian Elischer
1806c19da41eSPeter Wemm#
1807f71c01ccSPeter Wemm# Audio drivers: `pcm', `sbc', `gusc', `pca'
1808c19da41eSPeter Wemm#
1809c7406082SJohn-Mark Gurney# pcm: PCM audio through various sound cards.
1810c7406082SJohn-Mark Gurney#
181168ec4eb6SLuigi Rizzo# This has support for a large number of new audio cards, based on
181268ec4eb6SLuigi Rizzo# CS423x, OPTi931, Yamaha OPL-SAx, and also for SB16, GusPnP.
181368ec4eb6SLuigi Rizzo# For more information about this driver and supported cards,
181498a44096SSheldon Hearn# see the pcm.4 man page.
1815c7406082SJohn-Mark Gurney#
1816c7406082SJohn-Mark Gurney# The flags of the device tells the device a bit more info about the
1817c7406082SJohn-Mark Gurney# device that normally is obtained through the PnP interface.
1818c7406082SJohn-Mark Gurney#	bit  2..0   secondary DMA channel;
1819c7406082SJohn-Mark Gurney#	bit  4      set if the board uses two dma channels;
1820c7406082SJohn-Mark Gurney#	bit 15..8   board type, overrides autodetection; leave it
1821c7406082SJohn-Mark Gurney#		    zero if don't know what to put in (and you don't,
1822c7406082SJohn-Mark Gurney#		    since this is unsupported at the moment...).
1823c7406082SJohn-Mark Gurney#
1824c19da41eSPeter Wemm# This driver will use the new PnP code if it's available.
1825c19da41eSPeter Wemm#
18266a8d6623SGarrett Wollman# pca: PCM audio through your PC speaker
18278b8cd792SJordan K. Hubbard#
182881bb901eSPeter Wemm# Supported cards include:
182981bb901eSPeter Wemm# Creative SoundBlaster ISA PnP/non-PnP
183081bb901eSPeter Wemm# Supports ESS and Avance ISA chips as well.
183181bb901eSPeter Wemm# Gravis UltraSound ISA PnP/non-PnP
183281bb901eSPeter Wemm# Crystal Semiconductor CS461x/428x PCI
183381bb901eSPeter Wemm# Neomagic 256AV (ac97)
183481bb901eSPeter Wemm# Most of the more common ISA/PnP sb/mss/ess compatable cards.
183581bb901eSPeter Wemm
183667245194SPeter Wemmdevice		pcm
1837c19da41eSPeter Wemm
1838f71c01ccSPeter Wemm# For non-pnp sound cards with no bridge drivers only:
1839f71c01ccSPeter Wemmhint.pcm.0.at="isa"
1840f71c01ccSPeter Wemmhint.pcm.0.irq="10"
1841f71c01ccSPeter Wemmhint.pcm.0.drq="1"
1842f71c01ccSPeter Wemmhint.pcm.0.flags="0x0"
1843f71c01ccSPeter Wemm
1844f71c01ccSPeter Wemm# For PnP/PCI sound cards, no hints are required.
1845f71c01ccSPeter Wemm
1846fb0ef528SSeigo Tanimura#
1847fb0ef528SSeigo Tanimura# midi: MIDI interfaces and synthesizers
1848fb0ef528SSeigo Tanimura#
1849fb0ef528SSeigo Tanimura
1850fb0ef528SSeigo Tanimuradevice		midi
1851fb0ef528SSeigo Tanimura
1852fb0ef528SSeigo Tanimura# For non-pnp sound cards with no bridge drivers:
1853fb0ef528SSeigo Tanimurahint.midi.0.at="isa"
1854fb0ef528SSeigo Tanimurahint.midi.0.irq="5"
1855fb0ef528SSeigo Tanimurahint.midi.0.flags="0x0"
1856fb0ef528SSeigo Tanimura
1857fb0ef528SSeigo Tanimura# For serial ports (this example configures port 2):
1858fb0ef528SSeigo Tanimura# TODO: implement generic tty-midi interface so that we can use
1859fb0ef528SSeigo Tanimura#	other uarts.
1860fb0ef528SSeigo Tanimurahint.midi.0.at="isa"
1861fb0ef528SSeigo Tanimurahint.midi.0.port="0x2F8"
1862fb0ef528SSeigo Tanimurahint.midi.0.irq="3"
1863fb0ef528SSeigo Tanimura
1864fb0ef528SSeigo Tanimura#
1865fb0ef528SSeigo Tanimura# seq: MIDI sequencer
1866fb0ef528SSeigo Tanimura#
1867fb0ef528SSeigo Tanimura
1868fb0ef528SSeigo Tanimuradevice		seq
1869fb0ef528SSeigo Tanimura
187081bb901eSPeter Wemm# The bridge drivers for sound cards.  These can be seperately configured
1871fb0ef528SSeigo Tanimura# for providing services to the likes of new-midi.
187281bb901eSPeter Wemm# When used with 'device pcm' they also provide pcm sound services.
187346d6fe72SSeigo Tanimura#
1874e3c43911SSeigo Tanimura# sbc:  Creative SoundBlaster ISA PnP/non-PnP
1875c2f8aaa8SSeigo Tanimura#	Supports ESS and Avance ISA chips as well.
187646d6fe72SSeigo Tanimura# gusc: Gravis UltraSound ISA PnP/non-PnP
187781bb901eSPeter Wemm# csa:  Crystal Semiconductor CS461x/428x PCI
187846d6fe72SSeigo Tanimura
1879869f459cSSeigo Tanimura# For non-PnP cards:
1880f71c01ccSPeter Wemmdevice		sbc
1881f71c01ccSPeter Wemmhint.sbc.0.at="isa"
1882f71c01ccSPeter Wemmhint.sbc.0.port="0x220"
1883f71c01ccSPeter Wemmhint.sbc.0.irq="5"
1884f71c01ccSPeter Wemmhint.sbc.0.drq="1"
1885f71c01ccSPeter Wemmhint.sbc.0.flags="0x15"
1886f71c01ccSPeter Wemmdevice		gusc
1887f71c01ccSPeter Wemmhint.gusc.0.at="isa"
1888f71c01ccSPeter Wemmhint.gusc.0.port="0x220"
1889f71c01ccSPeter Wemmhint.gusc.0.irq="5"
1890f71c01ccSPeter Wemmhint.gusc.0.drq="1"
1891f71c01ccSPeter Wemmhint.gusc.0.flags="0x13"
1892869f459cSSeigo Tanimura
1893f71c01ccSPeter Wemmdevice		pca
1894f71c01ccSPeter Wemmhint.pca.0.at="isa"
1895f71c01ccSPeter Wemmhint.pca.0.port="0x040"
18969ad380abSGarrett Wollman
18976a8d6623SGarrett Wollman#
1898567e21c2SBruce Evans# Miscellaneous hardware:
18996a8d6623SGarrett Wollman#
19006a8d6623SGarrett Wollman# mcd: Mitsumi CD-ROM
19012d859864SAndreas Schulz# scd: Sony CD-ROM
190205e1d9d4SJordan K. Hubbard# matcd: Matsushita/Panasonic CD-ROM
19036a8d6623SGarrett Wollman# wt: Wangtek and Archive QIC-02/QIC-36 tape drives
19046a8d6623SGarrett Wollman# ctx: Cortex-I frame grabber
19056a8d6623SGarrett Wollman# apm: Laptop Advanced Power Management (experimental)
1906ff3f2f5cSMitsuru IWASAKI# pmtimer: Timer device driver for power management events (APM or ACPI)
19076c5e9bbdSMike Pritchard# spigot: The Creative Labs Video Spigot video-acquisition board
19081d86961eSJordan K. Hubbard# meteor: Matrox Meteor video capture board
19091c2b5939SRoger Hardiman# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
191065e8111fSBruce Evans# cy: Cyclades serial driver
1911a50cd483SJordan K. Hubbard# dgb: Digiboard PC/Xi and PC/Xe series driver (ALPHA QUALITY!)
1912c35bda94SBrian Somers# dgm: Digiboard PC/Xem driver
19136d04301dSAlexander Langer# gp:  National Instruments AT-GPIB and AT-GPIB/TNT board, PCMCIA-GPIB
1914a800f455SJulian Elischer# asc: GI1904-based hand scanners, e.g. the Trust Amiscan Grey
19151a7c583cSGarrett Wollman# gsc: Genius GS-4500 hand scanner.
19166d04301dSAlexander Langer# joy: joystick (including IO DATA PCJOY PC Card joystick)
1917657e73c4SPeter Dufault# labpc: National Instrument's Lab-PC and Lab-PC+
1918edd5302dSJeroen Ruigrok van der Werven# The LOUTB option specifies a slower outb() for debugging purposes.
1919d0930614SAndrey A. Chernov# rc: RISCom/8 multiport card
19203b577e1fSJordan K. Hubbard# rp: Comtrol Rocketport(ISA) - single card
1921567e21c2SBruce Evans# tw: TW-523 power line interface for use with X-10 home control products
19220d04cf6aSPeter Wemm# si: Specialix SI/XIO 4-32 port terminal multiplexor
19234323578dSNick Sayer# spic: Sony Programmable I/O controller (VAIO notebooks)
1924c9da1b81SPeter Wemm# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based)
1925c9da1b81SPeter Wemm# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent)
1926657e73c4SPeter Dufault
1927e597b497SNate Williams# Notes on APM
19283d4d8fe9SPoul-Henning Kamp#  The flags takes the following meaning for apm0:
19293d4d8fe9SPoul-Henning Kamp#    0x0020  Statclock is broken.
1930c9c350b7SBill Fumerola#  If apm is omitted, some systems require sysctl -w kern.timecounter.method=1
193138ebe562SAdam David#  for correct timekeeping.
193238ebe562SAdam David
19332cd01159SJordan K. Hubbard# Notes on the spigot:
19342cd01159SJordan K. Hubbard#  The video spigot is at 0xad6.  This port address can not be changed.
19352cd01159SJordan K. Hubbard#  The irq values may only be 10, 11, or 15
19362cd01159SJordan K. Hubbard#  I/O memory is an 8kb region.  Possible values are:
19372cd01159SJordan K. Hubbard#    0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff
1938d01b6680SJordan K. Hubbard#    The start address must be on an even boundary.
1939d01b6680SJordan K. Hubbard#  Add the following option if you want to allow non-root users to be able
1940d01b6680SJordan K. Hubbard#  to access the spigot.  This option is not secure because it allows users
1941d01b6680SJordan K. Hubbard#  direct access to the I/O page.
1942d01b6680SJordan K. Hubbard#  	options SPIGOT_UNSECURE
19438819d6ecSPoul-Henning Kamp
19443b577e1fSJordan K. Hubbard# Notes on the Comtrol Rocketport driver:
19453b577e1fSJordan K. Hubbard#
19463b577e1fSJordan K. Hubbard# The exact values used for rp0 depend on how many boards you have
19473b577e1fSJordan K. Hubbard# in the system.  The manufacturer's sample configs are listed as:
19483b577e1fSJordan K. Hubbard#
1949f71c01ccSPeter Wemm#               device  rp	# core driver support
1950f71c01ccSPeter Wemm#
19513b577e1fSJordan K. Hubbard#   Comtrol Rocketport ISA single card
1952f71c01ccSPeter Wemm#		hints.rp.0.at="isa"
1953f71c01ccSPeter Wemm#		hints.rp.0.port="0x280"
19543b577e1fSJordan K. Hubbard#
19553b577e1fSJordan K. Hubbard#   If instead you have two ISA cards, one installed at 0x100 and the
19563b577e1fSJordan K. Hubbard#   second installed at 0x180, then you should add the following to
1957f71c01ccSPeter Wemm#   your kernel probe hints:
1958f71c01ccSPeter Wemm#		hints.rp.0.at="isa"
1959f71c01ccSPeter Wemm#		hints.rp.0.port="0x100"
1960f71c01ccSPeter Wemm#		hints.rp.1.at="isa"
1961f71c01ccSPeter Wemm#		hints.rp.1.port="0x180"
19623b577e1fSJordan K. Hubbard#
19633b577e1fSJordan K. Hubbard#   For 4 ISA cards, it might be something like this:
1964f71c01ccSPeter Wemm#		hints.rp.0.at="isa"
1965f71c01ccSPeter Wemm#		hints.rp.0.port="0x180"
1966f71c01ccSPeter Wemm#		hints.rp.1.at="isa"
1967f71c01ccSPeter Wemm#		hints.rp.1.port="0x100"
1968f71c01ccSPeter Wemm#		hints.rp.2.at="isa"
1969f71c01ccSPeter Wemm#		hints.rp.2.port="0x340"
1970f71c01ccSPeter Wemm#		hints.rp.3.at="isa"
1971f71c01ccSPeter Wemm#		hints.rp.3.port="0x240"
19723b577e1fSJordan K. Hubbard#
1973f71c01ccSPeter Wemm#   And for PCI cards, you need no hints.
19743b577e1fSJordan K. Hubbard
1975a50cd483SJordan K. Hubbard# Notes on the Digiboard driver:
1976a50cd483SJordan K. Hubbard#
1977a50cd483SJordan K. Hubbard# The following flag values have special meanings:
1978c35bda94SBrian Somers#	0x01 - alternate layout of pins (dgb & dgm)
1979c35bda94SBrian Somers#	0x02 - use the windowed PC/Xe in 64K mode (dgb only)
19800d04cf6aSPeter Wemm
19810d04cf6aSPeter Wemm# Notes on the Specialix SI/XIO driver:
1982c4823710SPeter Wemm#  The host card is memory, not IO mapped.
1983c4823710SPeter Wemm#  The Rev 1 host cards use a 64K chunk, on a 32K boundary.
1984c4823710SPeter Wemm#  The Rev 2 host cards use a 32K chunk, on a 32K boundary.
1985c4823710SPeter Wemm#  The cards can use an IRQ of 11, 12 or 15.
1986c4823710SPeter Wemm
19874323578dSNick Sayer# Notes on the Sony Programmable I/O controller
19884323578dSNick Sayer#  This is a temporary driver that should someday be replaced by something
19894323578dSNick Sayer#  that hooks into the ACPI layer. The device is hooked to the PIIX4's
19904323578dSNick Sayer#  General Device 10 decoder, which means you have to fiddle with PCI
19914323578dSNick Sayer#  registers to map it in, even though it is otherwise treated here as
19924323578dSNick Sayer#  an ISA device. At the moment, the driver polls, although the device
19934323578dSNick Sayer#  is capable of generating interrupts. It largely undocumented.
19944323578dSNick Sayer#  The port location in the hint is where you WANT the device to be
19954323578dSNick Sayer#  mapped. 0x10a0 seems to be traditional. At the moment the jogdial
19964323578dSNick Sayer#  is the only thing truly supported, but aparently a fair percentage
19974323578dSNick Sayer#  of the Vaio extra features are controlled by this device.
19984323578dSNick Sayer
1999c9da1b81SPeter Wemm# Notes on the Stallion stl and stli drivers:
2000c9da1b81SPeter Wemm#  See src/i386/isa/README.stl for complete instructions.
2001c9da1b81SPeter Wemm#  This is version 0.0.5alpha, unsupported by Stallion.
2002c9da1b81SPeter Wemm#  The stl driver has a secondary IO port hard coded at 0x280.  You need
2003c9da1b81SPeter Wemm#     to change src/i386/isa/stallion.c if you reconfigure this on the boards.
200442b04349SPeter Wemm#  The "flags" and "msize" settings on the stli driver depend on the board:
200542b04349SPeter Wemm#	EasyConnection 8/64 ISA:     flags 23         msize 0x1000
200642b04349SPeter Wemm#	EasyConnection 8/64 EISA:    flags 24         msize 0x10000
200742b04349SPeter Wemm#	EasyConnection 8/64 MCA:     flags 25         msize 0x1000
200842b04349SPeter Wemm#	ONboard ISA:                 flags 4          msize 0x10000
200942b04349SPeter Wemm#	ONboard EISA:                flags 7          msize 0x10000
201042b04349SPeter Wemm#	ONboard MCA:                 flags 3          msize 0x10000
201142b04349SPeter Wemm#	Brumby:                      flags 2          msize 0x4000
201242b04349SPeter Wemm#	Stallion:                    flags 1          msize 0x10000
2013c9da1b81SPeter Wemm
2014f71c01ccSPeter Wemmdevice		mcd	1
2015f71c01ccSPeter Wemmhint.mcd.0.at="isa"
2016f71c01ccSPeter Wemmhint.mcd.0.port="0x300"
2017f71c01ccSPeter Wemmhint.mcd.0.irq="10"
201805e1d9d4SJordan K. Hubbard# for the Sony CDU31/33A CDROM
2019f71c01ccSPeter Wemmdevice		scd	1
2020f71c01ccSPeter Wemmhint.scd.0.at="isa"
2021f71c01ccSPeter Wemmhint.scd.0.port="0x230"
20226c5e9bbdSMike Pritchard# for the SoundBlaster 16 multicd - up to 4 devices
2023f71c01ccSPeter Wemmdevice		matcd	1
2024f71c01ccSPeter Wemmhint.matcd.0.at="isa"
2025f71c01ccSPeter Wemmhint.matcd.0.port="0x230"
2026f71c01ccSPeter Wemmdevice		wt	1
2027f71c01ccSPeter Wemmhint.wt.0.at="isa"
2028f71c01ccSPeter Wemmhint.wt.0.port="0x300"
2029f71c01ccSPeter Wemmhint.wt.0.irq="5"
2030f71c01ccSPeter Wemmhint.wt.0.drq="1"
2031f71c01ccSPeter Wemmdevice		ctx	1
2032f71c01ccSPeter Wemmhint.ctx.0.at="isa"
2033f71c01ccSPeter Wemmhint.ctx.0.port="0x230"
203442b04349SPeter Wemmhint.ctx.0.maddr="0xd0000"
2035f71c01ccSPeter Wemmdevice		spigot	1
2036f71c01ccSPeter Wemmhint.spigot.0.at="isa"
2037f71c01ccSPeter Wemmhint.spigot.0.port="0xad6"
2038f71c01ccSPeter Wemmhint.spigot.0.irq="15"
203942b04349SPeter Wemmhint.spigot.0.maddr="0xee000"
2040f71c01ccSPeter Wemmdevice		apm
2041f71c01ccSPeter Wemmhint.apm.0.flags="0x20"
2042ff3f2f5cSMitsuru IWASAKIdevice		pmtimer			# Adjust system timer at wakeup time
2043215e338bSMitsuru IWASAKIhint.pmtimer.0.at="isa"
2044f71c01ccSPeter Wemmdevice		gp
2045f71c01ccSPeter Wemmhint.gp.0.at="isa"
2046f71c01ccSPeter Wemmhint.gp.0.port="0x2c0"
2047f71c01ccSPeter Wemmdevice		gsc	1
2048f71c01ccSPeter Wemmhint.gsc.0.at="isa"
2049f71c01ccSPeter Wemmhint.gsc.0.port="0x270"
2050f71c01ccSPeter Wemmhint.gsc.0.drq="3"
2051f71c01ccSPeter Wemmdevice		joy			# PnP aware, hints for nonpnp only
2052f71c01ccSPeter Wemmhint.joy.0.at="isa"
2053f71c01ccSPeter Wemmhint.joy.0.port="0x201"
2054376cb06dSBruce Evansdevice		cy	1
2055376cb06dSBruce Evansoptions 	CY_PCI_FASTINTR		# Use with cy_pci unless irq is shared
2056376cb06dSBruce Evanshint.cy.0.at="isa"
2057376cb06dSBruce Evanshint.cy.0.irq="10"
2058376cb06dSBruce Evanshint.cy.0.maddr="0xd4000"
2059376cb06dSBruce Evanshint.cy.0.msize="0x2000"
2060f71c01ccSPeter Wemmdevice		dgb	1
20615895e3c8SPeter Wemmoptions 	NDGBPORTS=16		# Defaults to 16*NDGB
2062f71c01ccSPeter Wemmhint.dgb.0.at="isa"
2063f71c01ccSPeter Wemmhint.dgb.0.port="0x220"
206442b04349SPeter Wemmhint.dgb.0.maddr="0xfc000"
2065f71c01ccSPeter Wemmdevice		dgm	1
2066f71c01ccSPeter Wemmhint.dgm.0.at="isa"
2067f71c01ccSPeter Wemmhint.dgm.0.port="0x104"
206842b04349SPeter Wemmhint.dgm.0.maddr="0xd0000"
2069f71c01ccSPeter Wemmdevice		labpc	1
2070edd5302dSJeroen Ruigrok van der Wervenoptions 	LOUTB
2071f71c01ccSPeter Wemmhint.labpc.0.at="isa"
2072f71c01ccSPeter Wemmhint.labpc.0.port="0x260"
2073f71c01ccSPeter Wemmhint.labpc.0.irq="5"
2074f71c01ccSPeter Wemmdevice		rc	1
2075f71c01ccSPeter Wemmhint.rc.0.at="isa"
2076f71c01ccSPeter Wemmhint.rc.0.port="0x220"
2077f71c01ccSPeter Wemmhint.rc.0.irq="12"
2078f71c01ccSPeter Wemmdevice		rp
2079f71c01ccSPeter Wemmhint.rp.0.at="isa"
2080f71c01ccSPeter Wemmhint.rp.0.port="0x280"
2081567e21c2SBruce Evans# the port and irq for tw0 are fictitious
2082f71c01ccSPeter Wemmdevice		tw	1
2083f71c01ccSPeter Wemmhint.tw.0.at="isa"
2084f71c01ccSPeter Wemmhint.tw.0.port="0x380"
2085f71c01ccSPeter Wemmhint.tw.0.irq="11"
2086f71c01ccSPeter Wemmdevice		si
2087f71c01ccSPeter Wemmoptions 	SI_DEBUG
2088f71c01ccSPeter Wemmhint.si.0.at="isa"
208942b04349SPeter Wemmhint.si.0.maddr="0xd0000"
2090f71c01ccSPeter Wemmhint.si.0.irq="12"
2091f71c01ccSPeter Wemmdevice		asc	1
2092f71c01ccSPeter Wemmhint.asc.0.at="isa"
2093f71c01ccSPeter Wemmhint.asc.0.port="0x3EB"
2094f71c01ccSPeter Wemmhint.asc.0.drq="3"
2095f71c01ccSPeter Wemmhint.asc.0.irq="10"
20964323578dSNick Sayerdevice		spic
20974323578dSNick Sayerhint.spic.0.at="isa"
20984323578dSNick Sayerhint.spic.0.port="0x10a0"
2099f71c01ccSPeter Wemmdevice		stl
2100f71c01ccSPeter Wemmhint.stl.0.at="isa"
2101f71c01ccSPeter Wemmhint.stl.0.port="0x2a0"
2102f71c01ccSPeter Wemmhint.stl.0.irq="10"
2103f71c01ccSPeter Wemmdevice		stli
2104f71c01ccSPeter Wemmhint.stli.0.at="isa"
2105f71c01ccSPeter Wemmhint.stli.0.port="0x2a0"
210642b04349SPeter Wemmhint.stli.0.maddr="0xcc000"
2107f71c01ccSPeter Wemmhint.stli.0.flags="23"
210842b04349SPeter Wemmhint.stli.0.msize="0x1000"
2109f71c01ccSPeter Wemm# You are unlikely to have the hardware for loran <phk@FreeBSD.org>
2110f71c01ccSPeter Wemmdevice		loran
2111f71c01ccSPeter Wemmhint.loran.0.at="isa"
2112f71c01ccSPeter Wemmhint.loran.0.irq="5"
211398a44096SSheldon Hearn# HOT1 Xilinx 6200 card (http://www.vcc.com/)
2114c9953c3bSPeter Wemmdevice		xrpu
2115a800f455SJulian Elischer
2116eeb706c0SJustin T. Gibbs#
2117bba9a7a0SGarrett Wollman# The `meteor' device is a PCI video capture board. It can also have the
21181d86961eSJordan K. Hubbard# following options:
2119b1529bdaSPeter Wemm#   options METEOR_ALLOC_PAGES=xxx	preallocate kernel pages for data entry
21201d86961eSJordan K. Hubbard#	figure (ROWS*COLUMN*BYTES_PER_PIXEL*FRAME+PAGE_SIZE-1)/PAGE_SIZE
21211d86961eSJordan K. Hubbard#   options METEOR_DEALLOC_PAGES	remove all allocated pages on close(2)
2122b1529bdaSPeter Wemm#   options METEOR_DEALLOC_ABOVE=xxx	remove all allocated pages above the
21231d86961eSJordan K. Hubbard#	specified amount. If this value is below the allocated amount no action
21241d86961eSJordan K. Hubbard#	taken
21254f5f3f07SBrian Somers#   options METEOR_SYSTEM_DEFAULT={METEOR_PAL|METEOR_NTSC|METEOR_SECAM}, used
2126734d08a2SJordan K. Hubbard#	for initialization of fps routine when a signal is not present.
21271d86961eSJordan K. Hubbard#
2128a9c5b8d0SSøren Schmidt# The 'bktr' device is a PCI video capture device using the Brooktree
21291c2b5939SRoger Hardiman# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2130a9c5b8d0SSøren Schmidt# TV card, eg Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
21311c2b5939SRoger Hardiman# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
21321c2b5939SRoger Hardiman#
2133a9c5b8d0SSøren Schmidt# options 	OVERRIDE_CARD=xxx
2134a9c5b8d0SSøren Schmidt# options 	OVERRIDE_TUNER=xxx
2135a9c5b8d0SSøren Schmidt# options 	OVERRIDE_MSP=1
2136a9c5b8d0SSøren Schmidt# options 	OVERRIDE_DBX=1
21371c2b5939SRoger Hardiman# These options can be used to override the auto detection
213898a44096SSheldon Hearn# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
21391c2b5939SRoger Hardiman# Using sysctl(8) run-time overrides on a per-card basis can be made
21409ff07e32SAmancio Hasty#
21414f5f3f07SBrian Somers# options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
21421c2b5939SRoger Hardiman# or
21431c2b5939SRoger Hardiman# options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
21441c2b5939SRoger Hardiman# Specifes the default video capture mode.
2145a9c5b8d0SSøren Schmidt# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
2146a9c5b8d0SSøren Schmidt# to prevent hangs during initialisation.  eg VideoLogic Captivator PCI.
2147a9c5b8d0SSøren Schmidt#
21484f5f3f07SBrian Somers# options 	BKTR_USE_PLL
21491c2b5939SRoger Hardiman# PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal)
21501c2b5939SRoger Hardiman# must enable PLL mode with this option. eg some new Bt878 cards.
2151a9c5b8d0SSøren Schmidt#
21521c2b5939SRoger Hardiman# options 	BKTR_GPIO_ACCESS
21531c2b5939SRoger Hardiman# This enable IOCTLs which give user level access to the GPIO port.
21541c2b5939SRoger Hardiman#
21551c2b5939SRoger Hardiman# options 	BKTR_NO_MSP_RESET
21561c2b5939SRoger Hardiman# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
21571c2b5939SRoger Hardiman#
21581c2b5939SRoger Hardiman# options 	BKTR_430_FX_MODE
21591c2b5939SRoger Hardiman# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
21601c2b5939SRoger Hardiman#
21611c2b5939SRoger Hardiman# options 	BKTR_SIS_VIA_MODE
21621c2b5939SRoger Hardiman# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
21631c2b5939SRoger Hardiman# needed for some old SiS and VIA chipset motherboards.
21641c2b5939SRoger Hardiman# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
21651c2b5939SRoger Hardiman# motherboards and motherboards with bad or incomplete PCI 2.1 support.
21661c2b5939SRoger Hardiman# As a rough guess, old = before 1998
21671c2b5939SRoger Hardiman#
2168017b0edcSMatt Jacob
2169f71c01ccSPeter Wemmdevice		meteor	1
21700f3563b6SRoger Hardiman
217128ebb692SNicolas Souchu# Brooktree driver has been ported to the new I2C framework. Thus,
21720f3563b6SRoger Hardiman# you'll need to have the following 3 lines in the kernel config.
217337973e86SPeter Wemm#     device smbus
217437973e86SPeter Wemm#     device iicbus
217537973e86SPeter Wemm#     device iicbb
21760f3563b6SRoger Hardiman# The iic and smb devices are only needed if you want to control other
21770f3563b6SRoger Hardiman# I2C slaves connected to the external connector of some cards.
217828ebb692SNicolas Souchu#
2179f71c01ccSPeter Wemmdevice		bktr	1
2180446cee6eSJoerg Wunsch
2181dc9deb29SPoul-Henning Kamp#
21826d04301dSAlexander Langer# PC Card/PCMCIA
2183dc9deb29SPoul-Henning Kamp#
2184b5137699SWarner Losh# card: pccard slots
2185b5137699SWarner Losh# pcic: isa/pccard bridge
2186f71c01ccSPeter Wemmdevice		pcic
2187f71c01ccSPeter Wemmhint.pcic.0.at="isa"
2188f71c01ccSPeter Wemmhint.pcic.1.at="isa"
2189c9953c3bSPeter Wemmdevice		card
2190dc9deb29SPoul-Henning Kamp
21918aa25588SBrian Somers# You may need to reset all pccards after resuming
21928aa25588SBrian Somersoptions 	PCIC_RESUME_RESET	# reset after resume
21938aa25588SBrian Somers
2194446cee6eSJoerg Wunsch#
2195446cee6eSJoerg Wunsch# Laptop/Notebook options:
2196446cee6eSJoerg Wunsch#
2197446cee6eSJoerg Wunsch# See also:
21986c5e9bbdSMike Pritchard#  apm under `Miscellaneous hardware'
2199446cee6eSJoerg Wunsch# above.
2200446cee6eSJoerg Wunsch
2201446cee6eSJoerg Wunsch# For older notebooks that signal a powerfail condition (external
2202446cee6eSJoerg Wunsch# power supply dropped, or battery state low) by issuing an NMI:
2203446cee6eSJoerg Wunsch
2204446cee6eSJoerg Wunschoptions 	POWERFAIL_NMI	# make it beep instead of panicing
220565e8111fSBruce Evans
2206ab4c624bSMike Smith#
22078afa373cSNicolas Souchu# SMB bus
22088afa373cSNicolas Souchu#
22093c5656bfSArchie Cobbs# System Management Bus support is provided by the 'smbus' device.
22103c5656bfSArchie Cobbs# Access to the SMBus device is via the 'smb' device (/dev/smb*),
22113c5656bfSArchie Cobbs# which is a child of the 'smbus' device.
22128afa373cSNicolas Souchu#
22138afa373cSNicolas Souchu# Supported devices:
22143c5656bfSArchie Cobbs# smb		standard io through /dev/smb*
22158afa373cSNicolas Souchu#
22163c5656bfSArchie Cobbs# Supported SMB interfaces:
221728ebb692SNicolas Souchu# iicsmb	I2C to SMB bridge with any iicbus interface
221828ebb692SNicolas Souchu# bktr		brooktree848 I2C hardware interface
221904fb1490SNicolas Souchu# intpm		Intel PIIX4 Power Management Unit
2220c5ea635cSNicolas Souchu# alpm		Acer Aladdin-IV/V/Pro2 Power Management Unit
22213c5656bfSArchie Cobbs# ichsmb	Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
22228afa373cSNicolas Souchu#
2223c9953c3bSPeter Wemmdevice		smbus		# Bus support, required for smb below.
22243c5656bfSArchie Cobbs
2225c9953c3bSPeter Wemmdevice		intpm
2226f71c01ccSPeter Wemmdevice		alpm	1
22273c5656bfSArchie Cobbsdevice		ichsmb
22288afa373cSNicolas Souchu
2229c9953c3bSPeter Wemmdevice		smb
22308afa373cSNicolas Souchu
22318afa373cSNicolas Souchu#
22328afa373cSNicolas Souchu# I2C Bus
22338afa373cSNicolas Souchu#
22348afa373cSNicolas Souchu# Philips i2c bus support is provided by the `iicbus' device.
22358afa373cSNicolas Souchu#
22368afa373cSNicolas Souchu# Supported devices:
22378afa373cSNicolas Souchu# ic	i2c network interface
22388afa373cSNicolas Souchu# iic	i2c standard io
2239f7d09fbaSNicolas Souchu# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
22408afa373cSNicolas Souchu#
22418afa373cSNicolas Souchu# Supported interfaces:
22428afa373cSNicolas Souchu# pcf	Philips PCF8584 ISA-bus controller
224328ebb692SNicolas Souchu# bktr	brooktree848 I2C software interface
224428ebb692SNicolas Souchu#
224528ebb692SNicolas Souchu# Other:
224628ebb692SNicolas Souchu# iicbb	generic I2C bit-banging code (needed by lpbb, bktr)
22478afa373cSNicolas Souchu#
2248c9953c3bSPeter Wemmdevice		iicbus		# Bus support, required for ic/iic/iicsmb below.
2249c9953c3bSPeter Wemmdevice		iicbb
22508afa373cSNicolas Souchu
2251c9953c3bSPeter Wemmdevice		ic
2252c9953c3bSPeter Wemmdevice		iic
2253c9953c3bSPeter Wemmdevice		iicsmb		# smb over i2c bridge
22548afa373cSNicolas Souchu
2255f71c01ccSPeter Wemmdevice		pcf
2256f71c01ccSPeter Wemmhint.pcf.0.at="isa"
2257f71c01ccSPeter Wemmhint.pcf.0.port="0x320"
2258f71c01ccSPeter Wemmhint.pcf.0.irq="5"
22598afa373cSNicolas Souchu
226031a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
226131a539a5SHellmuth Michaelis# ISDN4BSD
226280037d6eSHellmuth Michaelis#
2263e5981bd1SHellmuth Michaelis# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
226480037d6eSHellmuth Michaelis#
226531a539a5SHellmuth Michaelis# i4b passive ISDN cards support contains the following hardware drivers:
22668afa373cSNicolas Souchu#
22678ccc600fSHellmuth Michaelis#	isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver
22688ccc600fSHellmuth Michaelis#	iwic - Winbond W6692 PCI bus ISDN S/T interface controller
22698ccc600fSHellmuth Michaelis#	ifpi - AVM Fritz!Card PCI driver
22708ccc600fSHellmuth Michaelis#	ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver
22718ccc600fSHellmuth Michaelis#	ifpnp - AVM Fritz!Card PnP driver
2272e5981bd1SHellmuth Michaelis#
227331a539a5SHellmuth Michaelis# Note that the ``options'' (if given) and ``device'' lines must BOTH
227431a539a5SHellmuth Michaelis# be uncommented to enable support for a given card !
227531a539a5SHellmuth Michaelis#
227631a539a5SHellmuth Michaelis# In addition to a hardware driver (and probably an option) the mandatory
227731a539a5SHellmuth Michaelis# ISDN protocol stack devices and the mandatory support device must be
227831a539a5SHellmuth Michaelis# enabled as well as one or more devices from the optional devices section.
227931a539a5SHellmuth Michaelis#
228031a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
228131a539a5SHellmuth Michaelis#	isic driver (Siemens/Infineon chipsets)
228231a539a5SHellmuth Michaelis#
228331a539a5SHellmuth Michaelisdevice	isic
228431a539a5SHellmuth Michaelis#
2285e5981bd1SHellmuth Michaelis# ISA bus non-PnP Cards:
2286e5981bd1SHellmuth Michaelis# ----------------------
228719c74962SPoul-Henning Kamp#
228819c74962SPoul-Henning Kamp# Teles S0/8 or Niccy 1008
22895895e3c8SPeter Wemmoptions 	TEL_S0_8
2290f71c01ccSPeter Wemmhint.isic.0.at="isa"
229142b04349SPeter Wemmhint.isic.0.maddr="0xd0000"
2292f71c01ccSPeter Wemmhint.isic.0.irq="5"
2293f71c01ccSPeter Wemmhint.isic.0.flags="1"
229419c74962SPoul-Henning Kamp#
229519c74962SPoul-Henning Kamp# Teles S0/16 or Creatix ISDN-S0 or Niccy 1016
22965895e3c8SPeter Wemmoptions 	TEL_S0_16
2297f71c01ccSPeter Wemmhint.isic.0.at="isa"
2298f71c01ccSPeter Wemmhint.isic.0.port="0xd80"
229942b04349SPeter Wemmhint.isic.0.maddr="0xd0000"
2300f71c01ccSPeter Wemmhint.isic.0.irq="5"
2301f71c01ccSPeter Wemmhint.isic.0.flags="2"
230219c74962SPoul-Henning Kamp#
230319c74962SPoul-Henning Kamp# Teles S0/16.3
23045895e3c8SPeter Wemmoptions 	TEL_S0_16_3
2305f71c01ccSPeter Wemmhint.isic.0.at="isa"
230619dde963SPeter Wemmhint.isic.0.port="0xd80"
2307f71c01ccSPeter Wemmhint.isic.0.irq="5"
2308f71c01ccSPeter Wemmhint.isic.0.flags="3"
230919c74962SPoul-Henning Kamp#
231019c74962SPoul-Henning Kamp# AVM A1 or AVM Fritz!Card
23115895e3c8SPeter Wemmoptions 	AVM_A1
2312f71c01ccSPeter Wemmhint.isic.0.at="isa"
231319dde963SPeter Wemmhint.isic.0.port="0x340"
2314f71c01ccSPeter Wemmhint.isic.0.irq="5"
2315f71c01ccSPeter Wemmhint.isic.0.flags="4"
231619c74962SPoul-Henning Kamp#
231731a539a5SHellmuth Michaelis# USRobotics Sportster ISDN TA intern
231831a539a5SHellmuth Michaelisoptions 	USR_STI
231931a539a5SHellmuth Michaelishint.isic.0.at="isa"
232031a539a5SHellmuth Michaelishint.isic.0.port="0x268"
232131a539a5SHellmuth Michaelishint.isic.0.irq="5"
232231a539a5SHellmuth Michaelishint.isic.0.flags="7"
232319c74962SPoul-Henning Kamp#
232431a539a5SHellmuth Michaelis# ITK ix1 Micro ( < V.3, non-PnP version )
232531a539a5SHellmuth Michaelisoptions 	ITKIX1
232631a539a5SHellmuth Michaelishint.isic.0.at="isa"
232731a539a5SHellmuth Michaelishint.isic.0.port="0x398"
232831a539a5SHellmuth Michaelishint.isic.0.irq="10"
232931a539a5SHellmuth Michaelishint.isic.0.flags="18"
233019c74962SPoul-Henning Kamp#
233180037d6eSHellmuth Michaelis# ELSA PCC-16
2332cb211653SJeroen Ruigrok van der Wervenoptions 	ELSA_PCC16
2333f71c01ccSPeter Wemmhint.isic.0.at="isa"
233419dde963SPeter Wemmhint.isic.0.port="0x360"
2335f71c01ccSPeter Wemmhint.isic.0.irq="10"
2336f71c01ccSPeter Wemmhint.isic.0.flags="20"
233780037d6eSHellmuth Michaelis#
2338e5981bd1SHellmuth Michaelis# ISA bus PnP Cards:
2339e5981bd1SHellmuth Michaelis# ------------------
234019c74962SPoul-Henning Kamp#
234119c74962SPoul-Henning Kamp# Teles S0/16.3 PnP
23425895e3c8SPeter Wemmoptions 	TEL_S0_16_3_P
234319c74962SPoul-Henning Kamp#
234419c74962SPoul-Henning Kamp# Creatix ISDN-S0 P&P
23455895e3c8SPeter Wemmoptions 	CRTX_S0_P
234619c74962SPoul-Henning Kamp#
234719c74962SPoul-Henning Kamp# Dr. Neuhaus Niccy Go@
23485895e3c8SPeter Wemmoptions 	DRN_NGO
234919c74962SPoul-Henning Kamp#
235019c74962SPoul-Henning Kamp# Sedlbauer Win Speed
23515895e3c8SPeter Wemmoptions 	SEDLBAUER
235219c74962SPoul-Henning Kamp#
235331a539a5SHellmuth Michaelis# Dynalink IS64PH
235431a539a5SHellmuth Michaelisoptions 	DYNALINK
235519c74962SPoul-Henning Kamp#
235619c74962SPoul-Henning Kamp# ELSA QuickStep 1000pro ISA
23575895e3c8SPeter Wemmoptions 	ELSA_QS1ISA
235819c74962SPoul-Henning Kamp#
23590df6adecSHellmuth Michaelis# Siemens I-Surf 2.0
2360cb211653SJeroen Ruigrok van der Wervenoptions 	SIEMENS_ISURF2
23610df6adecSHellmuth Michaelis#
23629d45f435SJeroen Ruigrok van der Werven# Asuscom ISDNlink 128K ISA
236331a539a5SHellmuth Michaelisoptions 	ASUSCOM_IPAC
23641eeb917cSJeroen Ruigrok van der Werven#
2365e5981bd1SHellmuth Michaelis# PCI bus Cards:
2366e5981bd1SHellmuth Michaelis# --------------
236719c74962SPoul-Henning Kamp#
2368e5981bd1SHellmuth Michaelis# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
23695895e3c8SPeter Wemmoptions 	ELSA_QS1PCI
237019c74962SPoul-Henning Kamp#
237131a539a5SHellmuth Michaelis#
237231a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
237331a539a5SHellmuth Michaelis#	ifpnp driver for AVM Fritz!Card PnP
237431a539a5SHellmuth Michaelis#
237531a539a5SHellmuth Michaelis# AVM Fritz!Card PnP
237631a539a5SHellmuth Michaelisdevice ifpnp
237731a539a5SHellmuth Michaelis#
237831a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
237931a539a5SHellmuth Michaelis#	ihfc driver for Cologne Chip ISA chipsets (experimental!)
238031a539a5SHellmuth Michaelis#
238131a539a5SHellmuth Michaelis# Teles 16.3c ISA PnP
238231a539a5SHellmuth Michaelis# AcerISDN P10 ISA PnP
238331a539a5SHellmuth Michaelis# TELEINT ISDN SPEED No.1
238431a539a5SHellmuth Michaelisdevice ihfc
238531a539a5SHellmuth Michaelis#
238631a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
238731a539a5SHellmuth Michaelis#	ifpi driver for AVM Fritz!Card PCI
238831a539a5SHellmuth Michaelis#
238980037d6eSHellmuth Michaelis# AVM Fritz!Card PCI
239031a539a5SHellmuth Michaelisdevice  ifpi
239180037d6eSHellmuth Michaelis#
239231a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
239331a539a5SHellmuth Michaelis#	iwic driver for Winbond W6692 chipset
239419c74962SPoul-Henning Kamp#
239531a539a5SHellmuth Michaelis# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards)
23963374f8ccSHellmuth Michaelisdevice  iwic
239719c74962SPoul-Henning Kamp#
239831a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
239931a539a5SHellmuth Michaelis#	ISDN Protocol Stack - mandatory for all hardware drivers
240019c74962SPoul-Henning Kamp#
240119c74962SPoul-Henning Kamp# Q.921 / layer 2 - i4b passive cards D channel handling
2402f71c01ccSPeter Wemmdevice		"i4bq921"
240319c74962SPoul-Henning Kamp#
240419c74962SPoul-Henning Kamp# Q.931 / layer 3 - i4b passive cards D channel handling
2405f71c01ccSPeter Wemmdevice		"i4bq931"
240619c74962SPoul-Henning Kamp#
240719c74962SPoul-Henning Kamp# layer 4 - i4b common passive and active card handling
2408f71c01ccSPeter Wemmdevice		"i4b"
240919c74962SPoul-Henning Kamp#
241031a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
241131a539a5SHellmuth Michaelis#	ISDN devices - mandatory for all hardware drivers
241219c74962SPoul-Henning Kamp#
241319c74962SPoul-Henning Kamp# userland driver to do ISDN tracing (for passive cards only)
2414f71c01ccSPeter Wemmdevice		"i4btrc"	4
241519c74962SPoul-Henning Kamp#
241619c74962SPoul-Henning Kamp# userland driver to control the whole thing
2417f71c01ccSPeter Wemmdevice		"i4bctl"
241819c74962SPoul-Henning Kamp#
241931a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
242031a539a5SHellmuth Michaelis#	ISDN devices - optional
242131a539a5SHellmuth Michaelis#
242219c74962SPoul-Henning Kamp# userland driver for access to raw B channel
2423f71c01ccSPeter Wemmdevice		"i4brbch"	4
242419c74962SPoul-Henning Kamp#
242519c74962SPoul-Henning Kamp# userland driver for telephony
2426f71c01ccSPeter Wemmdevice		"i4btel"	2
242719c74962SPoul-Henning Kamp#
242819c74962SPoul-Henning Kamp# network driver for IP over raw HDLC ISDN
2429f71c01ccSPeter Wemmdevice		"i4bipr"	4
243019c74962SPoul-Henning Kamp# enable VJ header compression detection for ipr i/f
243119c74962SPoul-Henning Kampoptions 	IPR_VJ
2432e5981bd1SHellmuth Michaelis# enable logging of the first n IP packets to isdnd (n=32 here)
2433f71c01ccSPeter Wemmoptions 	IPR_LOG=32
243419c74962SPoul-Henning Kamp#
2435aaf8e082SJoerg Wunsch# network driver for sync PPP over ISDN; requires an equivalent
2436f71c01ccSPeter Wemm# number of sppp device to be configured
2437f71c01ccSPeter Wemmdevice		"i4bisppp"	4
243831a539a5SHellmuth Michaelis#
243931a539a5SHellmuth Michaelis# B-channel inteface to the netgraph subsystem
244031a539a5SHellmuth Michaelisdevice		"i4bing"	2
244131a539a5SHellmuth Michaelis#
244231a539a5SHellmuth Michaelis#---------------------------------------------------------------------------
244319c74962SPoul-Henning Kamp
2444ab4c624bSMike Smith# Parallel-Port Bus
2445ab4c624bSMike Smith#
2446ab4c624bSMike Smith# Parallel port bus support is provided by the `ppbus' device.
2447ab4c624bSMike Smith# Multiple devices may be attached to the parallel port, devices
2448ab4c624bSMike Smith# are automatically probed and attached when found.
2449ab4c624bSMike Smith#
2450ab4c624bSMike Smith# Supported devices:
2451ab4c624bSMike Smith# vpo	Iomega Zip Drive
2452f7d09fbaSNicolas Souchu#	Requires SCSI disk support ('scbus' and 'da'), best
2453f88c1346SMike Smith#	performance is achieved with ports in EPP 1.9 mode.
2454fdf94d1aSNicolas Souchu# lpt	Parallel Printer
245546f3ff79SMike Smith# plip	Parallel network interface
2456fdf94d1aSNicolas Souchu# ppi	General-purpose I/O ("Geek Port") + IEEE1284 I/O
2457f7d09fbaSNicolas Souchu# pps	Pulse per second Timing Interface
245828ebb692SNicolas Souchu# lpbb	Philips official parallel port I2C bit-banging interface
2459ab4c624bSMike Smith#
2460ab4c624bSMike Smith# Supported interfaces:
2461ab4c624bSMike Smith# ppc	ISA-bus parallel port interfaces.
2462ab4c624bSMike Smith#
2463ef8f7626SNicolas Souchu
24640f210c92SNicolas Souchuoptions		PPC_PROBE_CHIPSET # Enable chipset specific detection
24650f210c92SNicolas Souchu				  # (see flags in ppc(4))
24665895e3c8SPeter Wemmoptions 	DEBUG_1284	# IEEE1284 signaling protocol debug
24675895e3c8SPeter Wemmoptions 	PERIPH_1284	# Makes your computer act as a IEEE1284
2468ef8f7626SNicolas Souchu				# compliant peripheral
24695895e3c8SPeter Wemmoptions 	DONTPROBE_1284	# Avoid boot detection of PnP parallel devices
24705895e3c8SPeter Wemmoptions 	VP0_DEBUG	# ZIP/ZIP+ debug
24715895e3c8SPeter Wemmoptions 	LPT_DEBUG	# Printer driver debug
24725895e3c8SPeter Wemmoptions 	PPC_DEBUG	# Parallel chipset level debug
24735895e3c8SPeter Wemmoptions 	PLIP_DEBUG	# Parallel network IP interface debug
24743b2d592cSJordan K. Hubbardoptions		PCFCLOCK_VERBOSE         # Verbose pcfclock driver
24753b2d592cSJordan K. Hubbardoptions		PCFCLOCK_MAX_RETRIES=5   # Maximum read tries (default 10)
2476ef8f7626SNicolas Souchu
2477f71c01ccSPeter Wemmdevice		ppc
2478f71c01ccSPeter Wemmhint.ppc.0.at="isa"
2479f71c01ccSPeter Wemmhint.ppc.0.irq="7"
24800d31b179SPeter Wemmdevice		ppbus
24810d31b179SPeter Wemmdevice		vpo
24820d31b179SPeter Wemmdevice		lpt
24830d31b179SPeter Wemmdevice		plip
24840d31b179SPeter Wemmdevice		ppi
24850d31b179SPeter Wemmdevice		pps
24860d31b179SPeter Wemmdevice		lpbb
24870d31b179SPeter Wemmdevice		pcfclock
2488ab4c624bSMike Smith
2489432aad0eSTor Egge# Kernel BOOTP support
2490432aad0eSTor Egge
2491432aad0eSTor Eggeoptions 	BOOTP		# Use BOOTP to obtain IP address/hostname
2492432aad0eSTor Eggeoptions 	BOOTP_NFSROOT	# NFS mount root filesystem using BOOTP info
24935895e3c8SPeter Wemmoptions 	BOOTP_NFSV3	# Use NFS v3 to NFS mount root
2494432aad0eSTor Eggeoptions 	BOOTP_COMPAT	# Workaround for broken bootp daemons.
24955895e3c8SPeter Wemmoptions 	BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2496432aad0eSTor Egge
2497d94f38acSEivind Eklund#
2498d94f38acSEivind Eklund# Add tie-ins for a hardware watchdog.  This only enable the hooks;
2499d94f38acSEivind Eklund# the user must still supply the actual driver.
2500d94f38acSEivind Eklund#
2501d94f38acSEivind Eklundoptions 	HW_WDOG
2502d94f38acSEivind Eklund
2503005092bbSEivind Eklund#
2504005092bbSEivind Eklund# Set the number of PV entries per process.  Increasing this can
2505005092bbSEivind Eklund# stop panics related to heavy use of shared memory. However, that can
2506005092bbSEivind Eklund# (combined with large amounts of physical memory) cause panics at
2507005092bbSEivind Eklund# boot time due the kernel running out of VM space.
2508005092bbSEivind Eklund#
2509005092bbSEivind Eklund# If you're tweaking this, you might also want to increase the sysctls
2510005092bbSEivind Eklund# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
2511005092bbSEivind Eklund#
251204fa1e6cSEivind Eklund# The value below is the one more than the default.
2513005092bbSEivind Eklund#
25145895e3c8SPeter Wemmoptions 	PMAP_SHPGPERPROC=201
2515005092bbSEivind Eklund
2516c796cfa1SAndrzej Bialecki#
2517c796cfa1SAndrzej Bialecki# Disable swapping. This option removes all code which actually performs
2518c796cfa1SAndrzej Bialecki# swapping, so it's not possible to turn it back on at run-time.
2519c796cfa1SAndrzej Bialecki#
2520c796cfa1SAndrzej Bialecki# This is sometimes usable for systems which don't have any swap space
2521c796cfa1SAndrzej Bialecki# (see also sysctls "vm.defer_swapspace_pageouts" and
2522c796cfa1SAndrzej Bialecki# "vm.disable_swapspace_pageouts")
2523c796cfa1SAndrzej Bialecki#
252419dde963SPeter Wemm#options 	NO_SWAPPING
2525c796cfa1SAndrzej Bialecki
25269dab0776SDavid Greenman# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
25279dab0776SDavid Greenman# for sendfile(2) that are used to map file VM pages, and normally
25289dab0776SDavid Greenman# default to a quantity that is roughly 16*MAXUSERS+512. You would
25299dab0776SDavid Greenman# typically want about 4 of these for each simultaneous file send.
25309dab0776SDavid Greenman#
25315895e3c8SPeter Wemmoptions 	NSFBUFS=1024
25329dab0776SDavid Greenman
253315a1057cSEivind Eklund#
2534053a2b61SEivind Eklund# Enable extra debugging code for locks.  This stores the filename and
2535ec4e5afbSRobert Nordier# line of whatever acquired the lock in the lock itself, and change a
2536053a2b61SEivind Eklund# number of function calls to pass around the relevant data.  This is
2537053a2b61SEivind Eklund# not at all useful unless you are debugging lock code.  Also note
2538053a2b61SEivind Eklund# that it is likely to break e.g. fstat(1) unless you recompile your
2539053a2b61SEivind Eklund# userland with -DDEBUG_LOCKS as well.
254015a1057cSEivind Eklund#
254115a1057cSEivind Eklundoptions 	DEBUG_LOCKS
254215a1057cSEivind Eklund
25436e2972b8SMark Newton#
25446e2972b8SMark Newton# SysVR4 ABI emulation
25456e2972b8SMark Newton#
25466e2972b8SMark Newton# The svr4 ABI emulator can be statically compiled into the kernel or loaded as
25476e2972b8SMark Newton# a KLD module.
25486e2972b8SMark Newton# The STREAMS network emulation code can also be compiled statically or as a
25496e2972b8SMark Newton# module.  If loaded as a module, it must be loaded before the svr4 module
25506e2972b8SMark Newton# (the /usr/sbin/svr4 script does this for you).  If compiling statically,
2551f71c01ccSPeter Wemm# the `streams' device must be configured into any kernel which also
25526e2972b8SMark Newton# specifies COMPAT_SVR4.  It is possible to have a statically-configured
25536e2972b8SMark Newton# STREAMS device and a dynamically loadable svr4 emulator;  the /usr/sbin/svr4
25546e2972b8SMark Newton# script understands that it doesn't need to load the `streams' module under
25556e2972b8SMark Newton# those circumstances.
25566e2972b8SMark Newton# Caveat:  At this time, `options KTRACE' is required for the svr4 emulator
25576e2972b8SMark Newton# (whether static or dynamic).
25586e2972b8SMark Newton#
25596e2972b8SMark Newtonoptions		COMPAT_SVR4	# build emulator statically
25606e2972b8SMark Newtonoptions		DEBUG_SVR4	# enable verbose debugging
2561f71c01ccSPeter Wemmdevice		streams		# STREAMS network driver (required for svr4).
25626e2972b8SMark Newton
2563edd5302dSJeroen Ruigrok van der Werven# Enable iBCS2 runtime support for SCO and ISC binaries
2564edd5302dSJeroen Ruigrok van der Wervenoptions 	IBCS2
2565edd5302dSJeroen Ruigrok van der Werven# Emulate spx device for client side of SVR3 local X interface
2566edd5302dSJeroen Ruigrok van der Wervenoptions 	SPX_HACK
2567edd5302dSJeroen Ruigrok van der Werven
25681d33cf3dSNick Hibma# USB support
25691d33cf3dSNick Hibma# UHCI controller
2570c9953c3bSPeter Wemmdevice		uhci
25711d33cf3dSNick Hibma# OHCI controller
2572c9953c3bSPeter Wemmdevice		ohci
25731d33cf3dSNick Hibma# General USB code (mandatory for USB)
2574c9953c3bSPeter Wemmdevice		usb
25751d33cf3dSNick Hibma#
2576b5ea1f0cSNick Hibma# USB Double Bulk Pipe devices
2577b5ea1f0cSNick Hibmadevice		udbp
2578f26c33d2SNick Hibma# Generic USB device driver
2579c9953c3bSPeter Wemmdevice		ugen
2580f26c33d2SNick Hibma# Human Interface Device (anything with buttons and dials)
2581c9953c3bSPeter Wemmdevice		uhid
25821d33cf3dSNick Hibma# USB keyboard
2583c9953c3bSPeter Wemmdevice		ukbd
25841d33cf3dSNick Hibma# USB printer
2585c9953c3bSPeter Wemmdevice		ulpt
2586f26c33d2SNick Hibma# USB Iomega Zip 100 Drive
2587c9953c3bSPeter Wemmdevice		umass
2588e9fb12d3SNick Hibma# USB modem support
2589e9fb12d3SNick Hibmadevice		umodem
2590f26c33d2SNick Hibma# USB mouse
2591c9953c3bSPeter Wemmdevice		ums
2592e2dbd15fSNick Hibma# Diamond Rio 500 Mp3 player
2593e2dbd15fSNick Hibmadevice		urio
25942fd84f56SNick Hibma# USB scanners
25952fd84f56SNick Hibmadevice		uscanner
2596f26c33d2SNick Hibma#
2597ed63a7aaSBill Paul# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2598d04bb221SBill Paul# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2599d04bb221SBill Paul# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2600d04bb221SBill Paul# eval board.
2601c9953c3bSPeter Wemmdevice		aue
2602dfd1e98eSBill Paul#
260301779872SBill Paul# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
260401779872SBill Paul# and Netmate II, and the Belkin F5U111.
2605c9953c3bSPeter Wemmdevice		cue
260601779872SBill Paul#
2607dfd1e98eSBill Paul# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2608d04bb221SBill Paul# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2609d04bb221SBill Paul# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
261001779872SBill Paul# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
261101779872SBill Paul# and 2104USB, and the Corega USB-T.
2612c9953c3bSPeter Wemmdevice		kue
2613f26c33d2SNick Hibma
2614f26c33d2SNick Hibma# debugging options for the USB subsystem
26151d33cf3dSNick Hibma#
26167dc1a5bdSNick Hibmaoptions 	UHCI_DEBUG
26177dc1a5bdSNick Hibmaoptions 	OHCI_DEBUG
26181d33cf3dSNick Hibmaoptions 	USB_DEBUG
2619f26c33d2SNick Hibma
26207dc1a5bdSNick Hibmaoptions 	UGEN_DEBUG
2621f26c33d2SNick Hibmaoptions 	UHID_DEBUG
2622f26c33d2SNick Hibmaoptions 	UHUB_DEBUG
2623f26c33d2SNick Hibmaoptions 	UKBD_DEBUG
26247dc1a5bdSNick Hibmaoptions 	ULPT_DEBUG
2625f26c33d2SNick Hibmaoptions 	UMASS_DEBUG
2626f26c33d2SNick Hibmaoptions 	UMS_DEBUG
2627e2dbd15fSNick Hibmaoptions 	URIO_DEBUG
2628f26c33d2SNick Hibma
26296e8394b8SKazutaka YOKOTA# options for ukbd:
26306e8394b8SKazutaka YOKOTAoptions 	UKBD_DFLT_KEYMAP	# specify the built-in keymap
2631cc6c2ad0SPeter Wemmmakeoptions	UKBD_DFLT_KEYMAP=it.iso
26326e8394b8SKazutaka YOKOTA
2633785d2100SJohn Birrell#
2634785d2100SJohn Birrell# Embedded system options:
2635785d2100SJohn Birrell#
2636785d2100SJohn Birrell# An embedded system might want to run something other than init.
26378a13a924SJohn Birrelloptions 	INIT_PATH="/sbin/init:/stand/sysinstall"
2638bc0e3a03SJeroen Ruigrok van der Werven
2639bc0e3a03SJeroen Ruigrok van der Werven# Debug options
2640bc0e3a03SJeroen Ruigrok van der Wervenoptions 	BUS_DEBUG	# enable newbus debugging
2641bc0e3a03SJeroen Ruigrok van der Wervenoptions 	DEBUG_VFS_LOCKS	# enable vfs lock debugging
2642bc0e3a03SJeroen Ruigrok van der Wervenoptions 	NPX_DEBUG	# enable npx debugging (FPU/math emu)
2643bc0e3a03SJeroen Ruigrok van der Werven
2644446af86dSJohn Baldwin#####################################################################
2645446af86dSJohn Baldwin# SYSV IPC KERNEL PARAMETERS
2646446af86dSJohn Baldwin#
2647446af86dSJohn Baldwin# Maximum number of entries in a semaphore map.
2648446af86dSJohn Baldwinoptions 	SEMMAP=31
2649446af86dSJohn Baldwin
2650446af86dSJohn Baldwin# Maximum number of System V semaphores that can be used on the system at
2651446af86dSJohn Baldwin# one time.
2652446af86dSJohn Baldwinoptions 	SEMMNI=11
2653446af86dSJohn Baldwin
2654446af86dSJohn Baldwin# Total number of semaphores system wide
2655446af86dSJohn Baldwinoptions 	SEMMNS=61
2656446af86dSJohn Baldwin
2657446af86dSJohn Baldwin# Total number of undo structures in system
2658446af86dSJohn Baldwinoptions 	SEMMNU=31
2659446af86dSJohn Baldwin
2660446af86dSJohn Baldwin# Maximum number of System V semaphores that can be used by a single process
2661446af86dSJohn Baldwin# at one time.
2662446af86dSJohn Baldwinoptions 	SEMMSL=61
2663446af86dSJohn Baldwin
2664446af86dSJohn Baldwin# Maximum number of operations that can be outstanding on a single System V
2665446af86dSJohn Baldwin# semaphore at one time.
2666446af86dSJohn Baldwinoptions 	SEMOPM=101
2667446af86dSJohn Baldwin
2668446af86dSJohn Baldwin# Maximum number of undo operations that can be outstanding on a single
2669446af86dSJohn Baldwin# System V semaphore at one time.
2670446af86dSJohn Baldwinoptions 	SEMUME=11
2671446af86dSJohn Baldwin
2672446af86dSJohn Baldwin# Maximum number of shared memory pages system wide.
2673446af86dSJohn Baldwinoptions 	SHMALL=1025
2674446af86dSJohn Baldwin
2675446af86dSJohn Baldwin# Maximum size, in bytes, of a single System V shared memory region.
2676446af86dSJohn Baldwinoptions 	SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
2677446af86dSJohn Baldwinoptions 	SHMMAXPGS=1025
2678446af86dSJohn Baldwin
2679446af86dSJohn Baldwin# Minimum size, in bytes, of a single System V shared memory region.
2680446af86dSJohn Baldwinoptions 	SHMMIN=2
2681446af86dSJohn Baldwin
2682446af86dSJohn Baldwin# Maximum number of shared memory regions that can be used on the system
2683446af86dSJohn Baldwin# at one time.
2684446af86dSJohn Baldwinoptions 	SHMMNI=33
2685446af86dSJohn Baldwin
2686446af86dSJohn Baldwin# Maximum number of System V shared memory regions that can be attached to
2687446af86dSJohn Baldwin# a single process at one time.
2688446af86dSJohn Baldwinoptions 	SHMSEG=9
2689446af86dSJohn Baldwin
2690446af86dSJohn Baldwin#####################################################################
2691446af86dSJohn Baldwin
2692bc0e3a03SJeroen Ruigrok van der Werven# More undocumented options for linting.
2693bc0e3a03SJeroen Ruigrok van der Werven# Note that documenting these are not considered an affront.
2694bc0e3a03SJeroen Ruigrok van der Werven
2695bc0e3a03SJeroen Ruigrok van der Wervenoptions 	CAM_DEBUG_DELAY
269628d7984fSJeroen Ruigrok van der Werven
269728d7984fSJeroen Ruigrok van der Werven# VFS cluster debugging.
2698bc0e3a03SJeroen Ruigrok van der Wervenoptions 	CLUSTERDEBUG
2699bc0e3a03SJeroen Ruigrok van der Wervenoptions 	COMPAT_LINUX
270028d7984fSJeroen Ruigrok van der Werven
270128d7984fSJeroen Ruigrok van der Werven# Eliminate unneeded cache flush instruction(s).
2702bc0e3a03SJeroen Ruigrok van der Wervenoptions 	CPU_UPGRADE_HW_CACHE
270328d7984fSJeroen Ruigrok van der Werven
2704bc0e3a03SJeroen Ruigrok van der Wervenoptions 	DEBUG
2705bc0e3a03SJeroen Ruigrok van der Wervenoptions 	DEBUG_LINUX
2706a88d714cSJeroen Ruigrok van der Werven
2707a88d714cSJeroen Ruigrok van der Werven# Disable the 4 MByte PSE CPU feature.
2708bc0e3a03SJeroen Ruigrok van der Werven#options 	DISABLE_PSE
2709bc0e3a03SJeroen Ruigrok van der Wervenoptions 	ENABLE_ALART
2710bc0e3a03SJeroen Ruigrok van der Wervenoptions 	I4B_SMP_WORKAROUND
2711bc0e3a03SJeroen Ruigrok van der Wervenoptions 	I586_PMC_GUPROF=0x70000
2712bc0e3a03SJeroen Ruigrok van der Wervenoptions 	KBDIO_DEBUG=2
2713bc0e3a03SJeroen Ruigrok van der Wervenoptions 	KBD_MAXRETRY=4
2714bc0e3a03SJeroen Ruigrok van der Wervenoptions 	KBD_MAXWAIT=6
2715bc0e3a03SJeroen Ruigrok van der Wervenoptions 	KBD_RESETDELAY=201
2716edd5302dSJeroen Ruigrok van der Werven
2717edd5302dSJeroen Ruigrok van der Werven# Enable the PF_KEY Key Management API.
2718bc0e3a03SJeroen Ruigrok van der Wervenoptions 	KEY
271928d7984fSJeroen Ruigrok van der Werven
272028d7984fSJeroen Ruigrok van der Werven# Kernel filelock debugging.
2721bc0e3a03SJeroen Ruigrok van der Wervenoptions 	LOCKF_DEBUG
272228d7984fSJeroen Ruigrok van der Werven
2723bc0e3a03SJeroen Ruigrok van der Wervenoptions 	MSGMNB=2049
2724bc0e3a03SJeroen Ruigrok van der Wervenoptions 	MSGMNI=41
2725bc0e3a03SJeroen Ruigrok van der Wervenoptions 	MSGSEG=2049
2726bc0e3a03SJeroen Ruigrok van der Wervenoptions 	MSGSSZ=16
2727bc0e3a03SJeroen Ruigrok van der Wervenoptions 	MSGTQL=41
2728bc0e3a03SJeroen Ruigrok van der Wervenoptions 	NBUF=512
2729bc0e3a03SJeroen Ruigrok van der Wervenoptions 	NETATALKDEBUG
2730bc0e3a03SJeroen Ruigrok van der Wervenoptions 	NMBCLUSTERS=1024
2731bc0e3a03SJeroen Ruigrok van der Wervenoptions 	PANIC_REBOOT_WAIT_TIME=16
2732bc0e3a03SJeroen Ruigrok van der Wervenoptions 	PSM_DEBUG=1
2733bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_DEBUG
2734bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MAX_SYNC=10000
2735bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MAX_WIDE=1
2736bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MYADDR=7
2737bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SC_DEBUG_LEVEL
2738bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SC_RENDER_DEBUG
2739bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SHOW_BUSYBUFS	# List buffers that prevent root unmount
2740bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SIMPLELOCK_DEBUG
2741bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SLIP_IFF_OPTS
2742bc0e3a03SJeroen Ruigrok van der Wervenoptions 	TIMER_FREQ="((14318182+6)/12)"
2743bc0e3a03SJeroen Ruigrok van der Wervenoptions 	VFS_BIO_DEBUG
2744bc0e3a03SJeroen Ruigrok van der Wervenoptions 	VM_KMEM_SIZE
2745bc0e3a03SJeroen Ruigrok van der Wervenoptions 	VM_KMEM_SIZE_MAX
2746bc0e3a03SJeroen Ruigrok van der Wervenoptions 	VM_KMEM_SIZE_SCALE
2747