xref: /freebsd/sys/conf/NOTES (revision 7d2ba89bbf9fc27ba62f00b3bc03677084069954)
11519d15cSJohn Baldwin# $FreeBSD$
22365e64fSRodney W. Grimes#
319dde963SPeter Wemm# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
4f71c01ccSPeter Wemm#
5f71c01ccSPeter Wemm# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
61519d15cSJohn Baldwin# 'makeoptions', 'hints', etc. go into the kernel configuration that you
7f71c01ccSPeter Wemm# run config(8) with.
8f71c01ccSPeter Wemm#
9b147fcf9SBruce Evans# Lines that begin with 'hint.' are NOT for config(8), they go into your
10f71c01ccSPeter Wemm# hints file.  See /boot/device.hints and/or the 'hints' config(8) directive.
112365e64fSRodney W. Grimes#
125d4850e7SAlexander Langer# Please use ``make LINT'' to create an old-style LINT file if you want to
135d4850e7SAlexander Langer# do kernel test-builds.
145d4850e7SAlexander Langer#
15dd267672SJohn Baldwin# This file contains machine independent kernel configuration notes.  For
16dd267672SJohn Baldwin# machine dependent notes, look in /sys/<arch>/conf/NOTES.
17dd267672SJohn Baldwin#
181519d15cSJohn Baldwin
191519d15cSJohn Baldwin#
201519d15cSJohn Baldwin# NOTES conventions and style guide:
211519d15cSJohn Baldwin#
221519d15cSJohn Baldwin# Large block comments should begin and end with a line containing only a
231519d15cSJohn Baldwin# comment character.
241519d15cSJohn Baldwin#
251519d15cSJohn Baldwin# To describe a particular object, a block comment (if it exists) should
261519d15cSJohn Baldwin# come first.  Next should come device, options, and hints lines in that
271519d15cSJohn Baldwin# order.  All device and option lines must be described by a comment that
281519d15cSJohn Baldwin# doesn't just expand the device or option name.  Use only a concise
291519d15cSJohn Baldwin# comment on the same line if possible.  Very detailed descriptions of
301519d15cSJohn Baldwin# devices and subsystems belong in manpages.
311519d15cSJohn Baldwin#
321519d15cSJohn Baldwin# A space followed by a tab separates 'option' from an option name.  Two
331519d15cSJohn Baldwin# spaces followed by a tab separate 'device' from a device name.  Comments
341519d15cSJohn Baldwin# after an option or device should use one space after the comment character.
351519d15cSJohn Baldwin# To comment out a negative option that disables code and thus should not be
361519d15cSJohn Baldwin# enabled for LINT builds, precede 'option' with "#!".
372365e64fSRodney W. Grimes#
382365e64fSRodney W. Grimes
396a8d6623SGarrett Wollman#
406a8d6623SGarrett Wollman# This is the ``identification'' of the kernel.  Usually this should
416a8d6623SGarrett Wollman# be the same as the name of your kernel.
426a8d6623SGarrett Wollman#
436a8d6623SGarrett Wollmanident		LINT
446a8d6623SGarrett Wollman
456a8d6623SGarrett Wollman#
466a8d6623SGarrett Wollman# The `maxusers' parameter controls the static sizing of a number of
47c8b4c292SMatthew Dillon# internal system tables by a formula defined in subr_param.c.  Setting
48c8b4c292SMatthew Dillon# maxusers to 0 will cause the system to auto-size based on physical
49c8b4c292SMatthew Dillon# memory.
506a8d6623SGarrett Wollman#
516a8d6623SGarrett Wollmanmaxusers	10
526a8d6623SGarrett Wollman
536a8d6623SGarrett Wollman#
547bf01a14SPeter Wemm# The `makeoptions' parameter allows variables to be passed to the
55503e6666SBruce Evans# generated Makefile in the build area.
56503e6666SBruce Evans#
57503e6666SBruce Evans# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
58503e6666SBruce Evans# after most other flags.  Here we use it to inhibit use of non-optimal
59503e6666SBruce Evans# gcc builtin functions (e.g., memcmp).
60503e6666SBruce Evans#
61503e6666SBruce Evans# DEBUG happens to be magic.
627bf01a14SPeter Wemm# The following is equivalent to 'config -g KERNELNAME' and creates
637bf01a14SPeter Wemm# 'kernel.debug' compiled with -g debugging as well as a normal
647bf01a14SPeter Wemm# 'kernel'.  Use 'make install.debug' to install the debug kernel
657bf01a14SPeter Wemm# but that isn't normally necessary as the debug symbols are not loaded
667bf01a14SPeter Wemm# by the kernel and are not useful there anyway.
677bf01a14SPeter Wemm#
682c8635c6SPeter Wemm# KERNEL can be overridden so that you can change the default name of your
692c8635c6SPeter Wemm# kernel.
702c8635c6SPeter Wemm#
710e3d06b1SWarner Losh# MODULES_OVERRIDE can be used to limit modules built to a specific list.
720e3d06b1SWarner Losh#
73503e6666SBruce Evansmakeoptions	CONF_CFLAGS=-fno-builtin  #Don't allow use of memcmp, etc.
745895e3c8SPeter Wemm#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
752c8635c6SPeter Wemm#makeoptions	KERNEL=foo		#Build kernel "foo" and install "/foo"
760e3d06b1SWarner Losh# Only build Linux API modules and plus those parts of the sound system I need.
7706a9ff8eSWarner Losh#makeoptions	MODULES_OVERRIDE="linux sound/snd sound/pcm sound/driver/maestro3"
787bf01a14SPeter Wemm
797bf01a14SPeter Wemm#
8098eb9009SSeigo Tanimura# Certain applications can grow to be larger than the 512M limit
81d43f0f0aSJohn Dyson# that FreeBSD initially imposes.  Below are some options to
8298eb9009SSeigo Tanimura# allow that limit to grow to 1GB, and can be increased further
83d43f0f0aSJohn Dyson# with changing the parameters.  MAXDSIZ is the maximum that the
84d43f0f0aSJohn Dyson# limit can be set to, and the DFLDSIZ is the default value for
855ecfb8f9SJim Pirzyk# the limit.  MAXSSIZ is the maximum that the stack limit can be
865ecfb8f9SJim Pirzyk# set to.  You might want to set the default lower than the max,
875ecfb8f9SJim Pirzyk# and explicitly set the maximum with a shell command for processes
88d43f0f0aSJohn Dyson# that regularly exceed the limit like INND.
89d43f0f0aSJohn Dyson#
9025388b6cSBruce Evansoptions 	MAXDSIZ=(1024UL*1024*1024)
9125388b6cSBruce Evansoptions 	MAXSSIZ=(128UL*1024*1024)
9225388b6cSBruce Evansoptions 	DFLDSIZ=(1024UL*1024*1024)
93d43f0f0aSJohn Dyson
94a59d364aSMatthew Dillon#
95a59d364aSMatthew Dillon# BLKDEV_IOSIZE sets the default block size used in user block
96a59d364aSMatthew Dillon# device I/O.  Note that this value will be overriden by the label
97a59d364aSMatthew Dillon# when specifying a block device from a label with a non-0
988b22cebbSMatthew Dillon# partition blocksize.  The default is PAGE_SIZE.
99a59d364aSMatthew Dillon#
100a59d364aSMatthew Dillonoptions 	BLKDEV_IOSIZE=8192
101a59d364aSMatthew Dillon
10220f71813SJohn-Mark Gurney# Options for the VM subsystem
1039a20f99aSJohn Baldwinoptions 	PQ_CACHESIZE=512	# color for 512k/16k cache
1049a20f99aSJohn Baldwin# Deprecated options supported for backwards compatibility
10520f71813SJohn-Mark Gurney#options 	PQ_NOOPT		# No coloring
1069a20f99aSJohn Baldwin#options 	PQ_LARGECACHE		# color for 512k/16k cache
10720f71813SJohn-Mark Gurney#options 	PQ_HUGECACHE		# color for 1024k/16k cache
1087c43028bSKelly Yancey#options 	PQ_MEDIUMCACHE		# color for 256k/16k cache
1097c43028bSKelly Yancey#options 	PQ_NORMALCACHE		# color for 64k/16k cache
11020f71813SJohn-Mark Gurney
111827d623eSJordan K. Hubbard# This allows you to actually store this configuration file into
112827d623eSJordan K. Hubbard# the kernel binary itself, where it may be later read by saying:
113ffd41c98SDoug Barton#    strings -n 3 /boot/kernel/kernel | sed -n 's/^___//p' > MYKERNEL
114827d623eSJordan K. Hubbard#
115827d623eSJordan K. Hubbardoptions 	INCLUDE_CONFIG_FILE     # Include this file in kernel
116827d623eSJordan K. Hubbard
1173bd65612SPoul-Henning Kampoptions 	GEOM_AES
11819b5c7bcSPoul-Henning Kampoptions 	GEOM_BDE
1193bd65612SPoul-Henning Kampoptions 	GEOM_BSD
1203bd65612SPoul-Henning Kampoptions 	GEOM_GPT
1213bd65612SPoul-Henning Kampoptions 	GEOM_MBR
1223bd65612SPoul-Henning Kampoptions 	GEOM_PC98
1233bd65612SPoul-Henning Kampoptions 	GEOM_SUNLABEL
1247b03a440SPoul-Henning Kamp
1258b140d57SMike Smith#
1268b140d57SMike Smith# The root device and filesystem type can be compiled in;
1278b140d57SMike Smith# this provides a fallback option if the root device cannot
1283b6c640cSCrist J. Clark# be correctly guessed by the bootstrap code, or an override if
1298b140d57SMike Smith# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
1308b140d57SMike Smith#
1318b140d57SMike Smithoptions 	ROOTDEVNAME=\"ufs:da0s2e\"
1328b140d57SMike Smith
1336a8d6623SGarrett Wollman
1346a8d6623SGarrett Wollman#####################################################################
135477a642cSPeter Wemm# SMP OPTIONS:
136477a642cSPeter Wemm#
137477a642cSPeter Wemm# SMP enables building of a Symmetric MultiProcessor Kernel.
138477a642cSPeter Wemm
139477a642cSPeter Wemm# Mandatory:
140477a642cSPeter Wemmoptions 	SMP			# Symmetric MultiProcessor Kernel
141477a642cSPeter Wemm
1422498cf8cSJohn Baldwin# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
1432498cf8cSJohn Baldwin# if the thread that currently owns the mutex is executing on another
1442498cf8cSJohn Baldwin# CPU.
1452498cf8cSJohn Baldwinoptions 	ADAPTIVE_MUTEXES
1462498cf8cSJohn Baldwin
1471fe4c660SJohn Baldwin# SMP Debugging Options:
1481fe4c660SJohn Baldwin#
149ab4f2c18SJohn Baldwin# MUTEX_DEBUG enables various extra assertions in the mutex code.
150aa4019efSRobert Watson# WITNESS enables the witness code which detects deadlocks and cycles
1511fe4c660SJohn Baldwin#         during locking operations.
152660d1e3aSJohn Baldwin# WITNESS_DDB causes the witness code to drop into the kernel debugger if
153660d1e3aSJohn Baldwin#	  a lock heirarchy violation occurs or if locks are held when going to
154660d1e3aSJohn Baldwin#	  sleep.
155660d1e3aSJohn Baldwin# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
156ab4f2c18SJohn Baldwinoptions 	MUTEX_DEBUG
1571fe4c660SJohn Baldwinoptions 	WITNESS
158660d1e3aSJohn Baldwinoptions 	WITNESS_DDB
159660d1e3aSJohn Baldwinoptions 	WITNESS_SKIPSPIN
1601fe4c660SJohn Baldwin
1614db0d7f1SDag-Erling Smørgrav#
1624db0d7f1SDag-Erling Smørgrav# MUTEX_PROFILING - Profiling mutual exclusion locks (mutexes).  This
1634db0d7f1SDag-Erling Smørgrav# records four numbers for each acquisition point (identified by
1644db0d7f1SDag-Erling Smørgrav# source file name and line number): longest time held, total time held,
1654db0d7f1SDag-Erling Smørgrav# number of non-recursive acquisitions, and average time held. Measurements
1664db0d7f1SDag-Erling Smørgrav# are made and stored in nanoseconds (using nanotime(9)), but are presented
1674db0d7f1SDag-Erling Smørgrav# in microseconds, which should be sufficient for the locks which actually
1684db0d7f1SDag-Erling Smørgrav# want this (those that are held long and / or often).  The MUTEX_PROFILING
1694db0d7f1SDag-Erling Smørgrav# option has the following sysctl namespace for controlling and viewing its
1704db0d7f1SDag-Erling Smørgrav# operation:
1714db0d7f1SDag-Erling Smørgrav#
1724db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.enable - enable / disable profiling
1734db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.acquisitions - number of mutex acquisitions held
1744db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.records - number of acquisition points recorded
1754db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.maxrecords - max number of acquisition points
1764db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.rejected - number of rejections (due to full table)
1774db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.hashsize - hash size
1784db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.collisions - number of hash collisions
1794db0d7f1SDag-Erling Smørgrav#  debug.mutex.prof.stats - profiling statistics
1804db0d7f1SDag-Erling Smørgrav#
1814db0d7f1SDag-Erling Smørgravoptions 	MUTEX_PROFILING
1824db0d7f1SDag-Erling Smørgrav
183477a642cSPeter Wemm
184477a642cSPeter Wemm#####################################################################
1856a8d6623SGarrett Wollman# COMPATIBILITY OPTIONS
186690f540cSAndrey A. Chernov
1876a8d6623SGarrett Wollman#
1886a8d6623SGarrett Wollman# Implement system calls compatible with 4.3BSD and older versions of
18956c7a48cSJordan K. Hubbard# FreeBSD.  You probably do NOT want to remove this as much current code
19056c7a48cSJordan K. Hubbard# still relies on the 4.3 emulation.
1916a8d6623SGarrett Wollman#
1925895e3c8SPeter Wemmoptions 	COMPAT_43
1936a8d6623SGarrett Wollman
194f0eb293eSAlfred Perlstein# Enable FreeBSD4 compatibility syscalls
195f0eb293eSAlfred Perlsteinoptions 	COMPAT_FREEBSD4
196f0eb293eSAlfred Perlstein
1976a8d6623SGarrett Wollman#
1986a8d6623SGarrett Wollman# These three options provide support for System V Interface
1996a8d6623SGarrett Wollman# Definition-style interprocess communication, in the form of shared
2006a8d6623SGarrett Wollman# memory, semaphores, and message queues, respectively.
2016a8d6623SGarrett Wollman#
2026a8d6623SGarrett Wollmanoptions 	SYSVSHM
2036a8d6623SGarrett Wollmanoptions 	SYSVSEM
2046a8d6623SGarrett Wollmanoptions 	SYSVMSG
2056a8d6623SGarrett Wollman
2066a8d6623SGarrett Wollman
2076a8d6623SGarrett Wollman#####################################################################
2086a8d6623SGarrett Wollman# DEBUGGING OPTIONS
2096a8d6623SGarrett Wollman
2106a8d6623SGarrett Wollman#
211b5d89ca8SBruce Evans# Enable the kernel debugger.
2126a8d6623SGarrett Wollman#
213b5d89ca8SBruce Evansoptions 	DDB
214b5d89ca8SBruce Evans
215b5d89ca8SBruce Evans#
2167085e708SBruce Evans# Use direct symbol lookup routines for ddb instead of the kernel linker
2177085e708SBruce Evans# ones, so that symbols (mostly) work before the kernel linker has been
2187085e708SBruce Evans# initialized.  This is not the default because it breaks ddb's lookup of
2197085e708SBruce Evans# symbols in loaded modules.
2207085e708SBruce Evans#
2217085e708SBruce Evans#!options 	DDB_NOKLDSYM
2227085e708SBruce Evans
2237085e708SBruce Evans#
2240be15decSJohn Baldwin# Print a stack trace of the current thread out on the console for a panic.
2250be15decSJohn Baldwin#
2260be15decSJohn Baldwinoptions 	DDB_TRACE
2270be15decSJohn Baldwin
2280be15decSJohn Baldwin#
2295ccab2afSGary Palmer# Don't drop into DDB for a panic. Intended for unattended operation
2305ccab2afSGary Palmer# where you may want to drop to DDB from the console, but still want
2315ccab2afSGary Palmer# the machine to recover from a panic
2325ccab2afSGary Palmer#
2335ccab2afSGary Palmeroptions 	DDB_UNATTENDED
2345ccab2afSGary Palmer
2355ccab2afSGary Palmer#
236562d05dfSPaul Traina# If using GDB remote mode to debug the kernel, there's a non-standard
237562d05dfSPaul Traina# extension to the remote protocol that can be used to use the serial
238562d05dfSPaul Traina# port as both the debugging port and the system console.  It's non-
239562d05dfSPaul Traina# standard and you're on your own if you enable it.  See also the
240562d05dfSPaul Traina# "remotechat" variables in the FreeBSD specific version of gdb.
241562d05dfSPaul Traina#
242562d05dfSPaul Trainaoptions 	GDB_REMOTE_CHAT
243562d05dfSPaul Traina
244562d05dfSPaul Traina#
245ea3fc8e4SJohn Baldwin# KTRACE enables the system-call tracing facility ktrace(2).  To be more
246ea3fc8e4SJohn Baldwin# SMP-friendly, KTRACE uses a worker thread to process most trace events
247ea3fc8e4SJohn Baldwin# asynchronously to the thread generating the event.  This requires a
248ea3fc8e4SJohn Baldwin# pre-allocated store of objects representing trace events.  The
249ea3fc8e4SJohn Baldwin# KTRACE_REQUEST_POOL option specifies the initial size of this store.
250ea3fc8e4SJohn Baldwin# The size of the pool can be adjusted both at boottime and runtime via
251ea3fc8e4SJohn Baldwin# the kern.ktrace_request_pool tunable and sysctl.
2526a8d6623SGarrett Wollman#
2532365e64fSRodney W. Grimesoptions 	KTRACE			#kernel tracing
254ea3fc8e4SJohn Baldwinoptions 	KTRACE_REQUEST_POOL=101
25521c64a07SAndrey A. Chernov
2566a8d6623SGarrett Wollman#
257c508c1b6SJohn Baldwin# KTR is a kernel tracing mechanism imported from BSD/OS.  Currently it
258c508c1b6SJohn Baldwin# has no userland interface aside from a few sysctl's.  It is enabled with
2590f8870a2SJohn Baldwin# the KTR option.  KTR_ENTRIES defines the number of entries in the circular
2600f8870a2SJohn Baldwin# trace buffer.  KTR_COMPILE defines the mask of events to compile into the
2610f8870a2SJohn Baldwin# kernel as defined by the KTR_* constants in <sys/ktr.h>.  KTR_MASK defines the
262c508c1b6SJohn Baldwin# initial value of the ktr_mask variable which determines at runtime what
263c508c1b6SJohn Baldwin# events to trace.  KTR_CPUMASK determines which CPU's log events, with
264d902baa4SJohn Baldwin# bit X corresponding to cpu X.  KTR_VERBOSE enables dumping of KTR events
265d902baa4SJohn Baldwin# to the console by default.  This functionality can be toggled via the
266d902baa4SJohn Baldwin# debug.ktr_verbose sysctl and defaults to off if KTR_VERBOSE is not defined.
267c508c1b6SJohn Baldwin#
268c508c1b6SJohn Baldwinoptions 	KTR
269c508c1b6SJohn Baldwinoptions 	KTR_ENTRIES=1024
27025388b6cSBruce Evansoptions 	KTR_COMPILE=(KTR_INTR|KTR_PROC)
271a9672a81SJohn Baldwinoptions 	KTR_MASK=KTR_INTR
272c508c1b6SJohn Baldwinoptions 	KTR_CPUMASK=0x3
273d902baa4SJohn Baldwinoptions 	KTR_VERBOSE
274c508c1b6SJohn Baldwin
275c508c1b6SJohn Baldwin#
2765526d2d9SEivind Eklund# The INVARIANTS option is used in a number of source files to enable
2776a8d6623SGarrett Wollman# extra sanity checking of internal structures.  This support is not
2786a8d6623SGarrett Wollman# enabled by default because of the extra time it would take to check
2796a8d6623SGarrett Wollman# for these conditions, which can only occur as a result of
2806a8d6623SGarrett Wollman# programming errors.
2816a8d6623SGarrett Wollman#
2825526d2d9SEivind Eklundoptions 	INVARIANTS
2835526d2d9SEivind Eklund
2845526d2d9SEivind Eklund#
28534b15f2aSJohn Baldwin# The INVARIANT_SUPPORT option makes us compile in support for
28634b15f2aSJohn Baldwin# verifying some of the internal structures.  It is a prerequisite for
28734b15f2aSJohn Baldwin# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
28834b15f2aSJohn Baldwin# called.  The intent is that you can set 'INVARIANTS' for single
28934b15f2aSJohn Baldwin# source files (by changing the source file or specifying it on the
29034b15f2aSJohn Baldwin# command line) if you have 'INVARIANT_SUPPORT' enabled.  Also, if you
29134b15f2aSJohn Baldwin# wish to build a kernel module with 'INVARIANTS', then adding
29234b15f2aSJohn Baldwin# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
29334b15f2aSJohn Baldwin# infrastructure without the added overhead.
29434b15f2aSJohn Baldwin#
29534b15f2aSJohn Baldwinoptions 	INVARIANT_SUPPORT
29634b15f2aSJohn Baldwin
29734b15f2aSJohn Baldwin#
2985526d2d9SEivind Eklund# The DIAGNOSTIC option is used to enable extra debugging information
2995526d2d9SEivind Eklund# from some parts of the kernel.  As this makes everything more noisy,
3005526d2d9SEivind Eklund# it is disabled by default.
3015526d2d9SEivind Eklund#
3020dc7d907SPoul-Henning Kampoptions 	DIAGNOSTIC
303da59a31cSDavid Greenman
3040dd1eea1SJordan K. Hubbard#
3050b5438c6SRobert Watson# REGRESSION causes optional kernel interfaces necessary only for regression
3060b5438c6SRobert Watson# testing to be enabled.  These interfaces may consitute security risks
3070b5438c6SRobert Watson# when enabled, as they permit processes to easily modify aspects of the
3080b5438c6SRobert Watson# run-time environment to reproduce unlikely or unusual (possibly normally
3090b5438c6SRobert Watson# impossible) scenarios.
3100b5438c6SRobert Watson#
3110b5438c6SRobert Watsonoptions 	REGRESSION
3120b5438c6SRobert Watson
3130b5438c6SRobert Watson#
3141432aa0cSJohn Baldwin# RESTARTABLE_PANICS allows one to continue from a panic as if it were
3151432aa0cSJohn Baldwin# a call to the debugger via the Debugger() function instead.  It is only
3161432aa0cSJohn Baldwin# useful if a kernel debugger is present.  To restart from a panic, reset
3171432aa0cSJohn Baldwin# the panicstr variable to NULL and continue execution.  This option is
3181432aa0cSJohn Baldwin# for development use only and should NOT be used in production systems
3191432aa0cSJohn Baldwin# to "workaround" a panic.
3201432aa0cSJohn Baldwin#
3219d60f0cbSJohn Baldwin#options 	RESTARTABLE_PANICS
3221432aa0cSJohn Baldwin
3231432aa0cSJohn Baldwin#
324346ebe51SEivind Eklund# This option let some drivers co-exist that can't co-exist in a running
325346ebe51SEivind Eklund# system.  This is used to be able to compile all kernel code in one go for
326346ebe51SEivind Eklund# quality assurance purposes (like this file, which the option takes it name
327346ebe51SEivind Eklund# from.)
328346ebe51SEivind Eklund#
329346ebe51SEivind Eklundoptions 	COMPILING_LINT
330346ebe51SEivind Eklund
3316a8d6623SGarrett Wollman
3326a8d6623SGarrett Wollman#####################################################################
3336a8d6623SGarrett Wollman# NETWORKING OPTIONS
33470c0b54cSAndrey A. Chernov
3356a8d6623SGarrett Wollman#
3366a8d6623SGarrett Wollman# Protocol families:
3376a8d6623SGarrett Wollman#  Only the INET (Internet) family is officially supported in FreeBSD.
33811bfa65aSBruce Evans#  Source code for the NS (Xerox Network Service) is provided for amusement
33911bfa65aSBruce Evans#  value.
3406a8d6623SGarrett Wollman#
3416a8d6623SGarrett Wollmanoptions 	INET			#Internet communications protocols
34251f4c152SYoshinobu Inoueoptions 	INET6			#IPv6 communications protocols
3436a800098SYoshinobu Inoueoptions 	IPSEC			#IP security
3446a800098SYoshinobu Inoueoptions 	IPSEC_ESP		#IP security (crypto; define w/ IPSEC)
3456a800098SYoshinobu Inoueoptions 	IPSEC_DEBUG		#debug for IP security
346f73bbaf2SDavid Greenman
347b9234fafSSam Leffler#options 	FAST_IPSEC		#new IPsec (cannot define w/ IPSEC)
348b9234fafSSam Leffler
349cc6a66f2SJulian Elischeroptions 	IPX			#IPX/SPX communications protocols
350cc6a66f2SJulian Elischeroptions 	IPXIP			#IPX in IP encapsulation (not available)
351cc6a66f2SJulian Elischeroptions 	IPTUNNEL		#IP in IPX encapsulation (not available)
352cc6a66f2SJulian Elischer
353b40ce416SJulian Elischer#options 	NCP			#NetWare Core protocol
354e83e2322SBoris Popov
35534b5fca7SJulian Elischeroptions 	NETATALK		#Appletalk communications protocols
3568b6f5e65SJeroen Ruigrok van der Wervenoptions 	NETATALKDEBUG		#Appletalk debugging
35734b5fca7SJulian Elischer
35811bfa65aSBruce Evans# These are currently broken but are shipped due to interest.
35911bfa65aSBruce Evans#options 	NS			#Xerox NS protocols
360dc915e7cSGarrett Wollman#options 	NSIP			#XNS over IP
36163a74862SSteven Wallace
362daaa73b5SRobert Watson#
363daaa73b5SRobert Watson# SMB/CIFS requester
364daaa73b5SRobert Watson# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
365daaa73b5SRobert Watson# options.
366daaa73b5SRobert Watson# NETSMBCRYPTO enables support for encrypted passwords.
367daaa73b5SRobert Watsonoptions 	NETSMB			#SMB/CIFS requester
368daaa73b5SRobert Watsonoptions 	NETSMBCRYPTO		#encrypted password support for SMB
369daaa73b5SRobert Watson
370d8589bd5SBoris Popov# mchain library. It can be either loaded as KLD or compiled into kernel
371d8589bd5SBoris Popovoptions 	LIBMCHAIN
372d8589bd5SBoris Popov
3734cf49a43SJulian Elischer# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
3744cf49a43SJulian Elischer# Individual node types can be enabled with the corresponding option
3754cf49a43SJulian Elischer# listed below; however, this is not strictly necessary as netgraph
3764cf49a43SJulian Elischer# will automatically load the corresponding KLD module if the node type
37792a3e552SArchie Cobbs# is not already compiled into the kernel. Each type below has a
37892a3e552SArchie Cobbs# corresponding man page, e.g., ng_async(8).
3794cf49a43SJulian Elischeroptions 	NETGRAPH		#netgraph(4) system
3804cf49a43SJulian Elischeroptions 	NETGRAPH_ASYNC
38192a3e552SArchie Cobbsoptions 	NETGRAPH_BPF
382901fadf7SArchie Cobbsoptions 	NETGRAPH_BRIDGE
3834cf49a43SJulian Elischeroptions 	NETGRAPH_CISCO
3844cf49a43SJulian Elischeroptions 	NETGRAPH_ECHO
38546aa8b9bSArchie Cobbsoptions 	NETGRAPH_ETHER
3864cf49a43SJulian Elischeroptions 	NETGRAPH_FRAME_RELAY
38737379158SBrooks Davisoptions 	NETGRAPH_GIF
38837379158SBrooks Davisoptions 	NETGRAPH_GIF_DEMUX
3894cf49a43SJulian Elischeroptions 	NETGRAPH_HOLE
3904cf49a43SJulian Elischeroptions 	NETGRAPH_IFACE
39137379158SBrooks Davisoptions 	NETGRAPH_IP_INPUT
39248e94174SArchie Cobbsoptions 	NETGRAPH_KSOCKET
393901fadf7SArchie Cobbsoptions 	NETGRAPH_L2TP
3944cf49a43SJulian Elischeroptions 	NETGRAPH_LMI
395a2b408adSArchie Cobbs# MPPC compression requires proprietary files (not included)
396a2b408adSArchie Cobbs#options 	NETGRAPH_MPPC_COMPRESSION
397a2b408adSArchie Cobbsoptions 	NETGRAPH_MPPC_ENCRYPTION
3987d7a5b89SArchie Cobbsoptions 	NETGRAPH_ONE2MANY
399b0801bacSArchie Cobbsoptions 	NETGRAPH_PPP
400b0801bacSArchie Cobbsoptions 	NETGRAPH_PPPOE
401add85a1dSArchie Cobbsoptions 	NETGRAPH_PPTPGRE
4024cf49a43SJulian Elischeroptions 	NETGRAPH_RFC1490
403b0801bacSArchie Cobbsoptions 	NETGRAPH_SOCKET
4044d60fee2SBrooks Davisoptions 	NETGRAPH_SPLIT
4054cf49a43SJulian Elischeroptions 	NETGRAPH_TEE
4064cf49a43SJulian Elischeroptions 	NETGRAPH_TTY
4074cf49a43SJulian Elischeroptions 	NETGRAPH_UI
408b58a8a3bSJulian Elischeroptions 	NETGRAPH_VJC
4094cf49a43SJulian Elischer
410c9953c3bSPeter Wemmdevice		mn	# Munich32x/Falc54 Nx64kbit/sec cards.
411599fcb02SPoul-Henning Kampdevice		lmc	# tulip based LanMedia WAN cards
41248ecc012SPoul-Henning Kampdevice		musycc	# LMC/SBE LMC1504 quad T1/E1
4133cf4d0bfSPoul-Henning Kamp
4146a8d6623SGarrett Wollman#
4156a8d6623SGarrett Wollman# Network interfaces:
416f71c01ccSPeter Wemm#  The `loop' device is MANDATORY when networking is enabled.
417f71c01ccSPeter Wemm#  The `ether' device provides generic code to handle
41856c7a48cSJordan K. Hubbard#  Ethernets; it is MANDATORY when a Ethernet device driver is
419722012ccSJulian Elischer#  configured or token-ring is enabled.
4201a02faf6SGarrett Wollman#  The `fddi' device provides generic code to support FDDI.
421eda6ecb2SMax Khon#  The `arcnet' device provides generic code to support Arcnet.
422f71c01ccSPeter Wemm#  The `sppp' device serves a similar role for certain types
423e7c234a1SPeter Wemm#  of synchronous PPP links (like `cx', `ar').
424f71c01ccSPeter Wemm#  The `sl' device implements the Serial Line IP (SLIP) service.
425f71c01ccSPeter Wemm#  The `ppp' device implements the Point-to-Point Protocol.
426f71c01ccSPeter Wemm#  The `bpf' device enables the Berkeley Packet Filter.  Be
427d29895dcSGarrett Wollman#  aware of the legal and administrative consequences of enabling this
428d29895dcSGarrett Wollman#  option.  The number of devices determines the maximum number of
429d29895dcSGarrett Wollman#  simultaneous BPF clients programs runnable.
430f71c01ccSPeter Wemm#  The `disc' device implements a minimal network interface,
43159d8d13fSGarrett Wollman#  which throws away all packets sent and never receives any.  It is
4321a02faf6SGarrett Wollman#  included for testing purposes.  This shows up as the `ds' interface.
4334c12b435SNick Sayer#  The `tap' device is a pty-like virtual Ethernet interface
434f71c01ccSPeter Wemm#  The `tun' device implements (user-)ppp and nos-tun
435f71c01ccSPeter Wemm#  The `gif' device implements IPv6 over IP4 tunneling,
436cfa1ca9dSYoshinobu Inoue#  IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
437cfa1ca9dSYoshinobu Inoue#  IPv6 over IPv6 tunneling.
438f367e2f2SMaxim Sobolev#  The `gre' device implements two types of IP4 over IP4 tunneling:
439f367e2f2SMaxim Sobolev#  GRE and MOBILE, as specified in the RFC1701 and RFC2004.
440f57fc21cSJeroen Ruigrok van der Werven#  The XBONEHACK option allows the same pair of addresses to be configured on
441f57fc21cSJeroen Ruigrok van der Werven#  multiple gif interfaces.
442f71c01ccSPeter Wemm#  The `faith' device captures packets sent to it and diverts them
443cfa1ca9dSYoshinobu Inoue#  to the IPv4/IPv6 translation daemon.
444d5015639SMunechika SUMIKAWA#  The `stf' device implements 6to4 encapsulation.
445f71c01ccSPeter Wemm#  The `ef' device provides support for multiple ethernet frame types
4465d94d71cSBoris Popov#  specified via ETHER_* options. See ef(4) for details.
4476a8d6623SGarrett Wollman#
448829b5d55SPeter Wemm# The PPP_BSDCOMP option enables support for compress(1) style entire
449829b5d55SPeter Wemm# packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
450829b5d55SPeter Wemm# PPP_FILTER enables code for filtering the ppp data stream and selecting
4516b5ca0d8SDag-Erling Smørgrav# events for resetting the demand dial activity timer - requires bpf.
452829b5d55SPeter Wemm# See pppd(8) for more details.
45389327d27SPeter Wemm#
454f71c01ccSPeter Wemmdevice		ether			#Generic Ethernet
4550fa2bf54SBrooks Davisdevice		vlan			#VLAN support
456f71c01ccSPeter Wemmdevice		token			#Generic TokenRing
457f71c01ccSPeter Wemmdevice		fddi			#Generic FDDI
458eda6ecb2SMax Khondevice		arcnet			#Generic Arcnet
459f71c01ccSPeter Wemmdevice		sppp			#Generic Synchronous PPP
46009d225d8SBrooks Davisdevice		loop			#Network loopback device
461f71c01ccSPeter Wemmdevice		bpf			#Berkeley packet filter
462f71c01ccSPeter Wemmdevice		disc			#Discard device (ds0, ds1, etc)
4634c12b435SNick Sayerdevice		tap			#Virtual Ethernet driver
464f71c01ccSPeter Wemmdevice		tun			#Tunnel driver (ppp(8), nos-tun(8))
465f71c01ccSPeter Wemmdevice		sl			#Serial Line IP
466f367e2f2SMaxim Sobolevdevice		gre			#IP over IP tunneling
46705c872adSBrooks Davisdevice		ppp			#Point-to-point protocol
46889327d27SPeter Wemmoptions 	PPP_BSDCOMP		#PPP BSD-compress support
46989327d27SPeter Wemmoptions 	PPP_DEFLATE		#PPP zlib/deflate/gzip support
4706b5ca0d8SDag-Erling Smørgravoptions 	PPP_FILTER		#enable bpf filtering (needs bpf)
471d29895dcSGarrett Wollman
472f71c01ccSPeter Wemmdevice		ef			# Multiple ethernet frames support
4735d94d71cSBoris Popovoptions 	ETHER_II		# enable Ethernet_II frame
4745d94d71cSBoris Popovoptions 	ETHER_8023		# enable Ethernet_802.3 (Novell) frame
4755d94d71cSBoris Popovoptions 	ETHER_8022		# enable Ethernet_802.2 frame
4765d94d71cSBoris Popovoptions 	ETHER_SNAP		# enable Ethernet_802.2/SNAP frame
4775d94d71cSBoris Popov
478cfa1ca9dSYoshinobu Inoue# for IPv6
4799753d2f8SBrooks Davisdevice		gif			#IPv6 and IPv4 tunneling
480f57fc21cSJeroen Ruigrok van der Wervenoptions 	XBONEHACK
4812f653328SBrooks Davisdevice		faith			#for IPv6 and IPv4 translation
482d5015639SMunechika SUMIKAWAdevice		stf			#6to4 IPv6 over IPv4 encapsulation
483cfa1ca9dSYoshinobu Inoue
4846a8d6623SGarrett Wollman#
4856a8d6623SGarrett Wollman# Internet family options:
4866a8d6623SGarrett Wollman#
4876a8d6623SGarrett Wollman# MROUTING enables the kernel multicast packet forwarder, which works
4886a8d6623SGarrett Wollman# with mrouted(8).
4896a8d6623SGarrett Wollman#
490d29895dcSGarrett Wollman# IPFIREWALL enables support for IP firewall construction, in
491ff6f025aSAlexander Langer# conjunction with the `ipfw' program.  IPFIREWALL_VERBOSE sends
492ff6f025aSAlexander Langer# logged packets to the system logger.  IPFIREWALL_VERBOSE_LIMIT
493ff6f025aSAlexander Langer# limits the number of times a matching entry can be logged.
494ab6e02daSJordan K. Hubbard#
495ab6e02daSJordan K. Hubbard# WARNING:  IPFIREWALL defaults to a policy of "deny ip from any to any"
496ab6e02daSJordan K. Hubbard# and if you do not add other rules during startup to allow access,
497a236d14cSJordan K. Hubbard# YOU WILL LOCK YOURSELF OUT.  It is suggested that you set firewall_type=open
498ab6e02daSJordan K. Hubbard# in /etc/rc.conf when first enabling this feature, then refining the
499ab6e02daSJordan K. Hubbard# firewall rules in /etc/rc.firewall after you've tested that the new kernel
500ab6e02daSJordan K. Hubbard# feature works properly.
5018dd4744eSJordan K. Hubbard#
502ffdd472dSPeter Wemm# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
503ffdd472dSPeter Wemm# allow everything.  Use with care, if a cracker can crash your
504ffdd472dSPeter Wemm# firewall machine, they can get to your protected machines.  However,
505ffdd472dSPeter Wemm# if you are using it as an as-needed filter for specific problems as
506ffdd472dSPeter Wemm# they arise, then this may be for you.  Changing the default to 'allow'
507ffdd472dSPeter Wemm# means that you won't get stuck if the kernel and /sbin/ipfw binary get
508ffdd472dSPeter Wemm# out of sync.
509d29895dcSGarrett Wollman#
51093e0e116SJulian Elischer# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''
51193e0e116SJulian Elischer#
5121b968362SDag-Erling Smørgrav# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
5131b968362SDag-Erling Smørgrav# packets without touching the ttl).  This can be useful to hide firewalls
5141b968362SDag-Erling Smørgrav# from traceroute and similar tools.
5151b968362SDag-Erling Smørgrav#
51608d38d45SRobert Watson# PFIL_HOOKS enables an abtraction layer which is meant to be used in
51708d38d45SRobert Watson# network code where filtering is required.  See the pfil(9) man page.
51808d38d45SRobert Watson# This option is a subset of the IPFILTER option.
51908d38d45SRobert Watson#
5205e331acdSGarrett Wollman# TCPDEBUG enables code which keeps traces of the TCP state machine
5215e331acdSGarrett Wollman# for sockets with the SO_DEBUG option set, which can then be examined
5225e331acdSGarrett Wollman# using the trpt(8) utility.
52365e8111fSBruce Evans#
524e3178a06SJordan K. Hubbardoptions 	MROUTING		# Multicast routing
525d29895dcSGarrett Wollmanoptions 	IPFIREWALL		#firewall
5264479e72cSCrist J. Clarkoptions 	IPFIREWALL_VERBOSE	#enable logging to syslogd(8)
5271857b6feSDag-Erling Smørgravoptions 	IPFIREWALL_FORWARD	#enable transparent proxy support
5285895e3c8SPeter Wemmoptions 	IPFIREWALL_VERBOSE_LIMIT=100	#limit verbosity
529e43a9900SAlexander Langeroptions 	IPFIREWALL_DEFAULT_TO_ACCEPT	#allow everything by default
530210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL		#firewall for IPv6
531210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_VERBOSE
532210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_VERBOSE_LIMIT=100
533210d0432SYoshinobu Inoueoptions 	IPV6FIREWALL_DEFAULT_TO_ACCEPT
53493e0e116SJulian Elischeroptions 	IPDIVERT		#divert sockets
5359cc86ee9SGuido van Rooijoptions 	IPFILTER		#ipfilter support
5369cc86ee9SGuido van Rooijoptions 	IPFILTER_LOG		#ipfilter logging
5378259bcdfSJeroen Ruigrok van der Wervenoptions 	IPFILTER_DEFAULT_BLOCK	#block all packets by default
5381b968362SDag-Erling Smørgravoptions 	IPSTEALTH		#support for stealth forwarding
53908d38d45SRobert Watsonoptions 	PFIL_HOOKS
54065e8111fSBruce Evansoptions 	TCPDEBUG
5416a8d6623SGarrett Wollman
54264dddc18SKris Kennaway# RANDOM_IP_ID causes the ID field in IP packets to be randomized
54364dddc18SKris Kennaway# instead of incremented by 1 with each packet generated.  This
54464dddc18SKris Kennaway# option closes a minor information leak which allows remote
54564dddc18SKris Kennaway# observers to determine the rate of packet generation on the
54664dddc18SKris Kennaway# machine by watching the counter.
54764dddc18SKris Kennawayoptions 	RANDOM_IP_ID
54864dddc18SKris Kennaway
549a79b7128SAlfred Perlstein# Statically Link in accept filters
550a79b7128SAlfred Perlsteinoptions 	ACCEPT_FILTER_DATA
551a79b7128SAlfred Perlsteinoptions 	ACCEPT_FILTER_HTTP
552a79b7128SAlfred Perlstein
553e46cd3d4SDag-Erling Smørgrav# TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
554e46cd3d4SDag-Erling Smørgrav# prevents nmap et al. from identifying the TCP/IP stack, but breaks support
555e46cd3d4SDag-Erling Smørgrav# for RFC1644 extensions and is not recommended for web servers.
556e46cd3d4SDag-Erling Smørgrav#
557e46cd3d4SDag-Erling Smørgravoptions 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN
558e46cd3d4SDag-Erling Smørgrav
55968e9d934SLuigi Rizzo# DUMMYNET enables the "dummynet" bandwidth limiter. You need
560c578eeb3SLuigi Rizzo# IPFIREWALL as well. See the dummynet(4) and ipfw(8) manpages for more info.
561c578eeb3SLuigi Rizzo# When you run DUMMYNET it is advisable to also have "options HZ=1000"
562c578eeb3SLuigi Rizzo# to achieve a smoother scheduling of the traffic.
563c578eeb3SLuigi Rizzo#
56468e9d934SLuigi Rizzo# BRIDGE enables bridging between ethernet cards -- see bridge(4).
565c578eeb3SLuigi Rizzo# You can use IPFIREWALL and DUMMYNET together with bridging.
566c578eeb3SLuigi Rizzo#
56768ec4eb6SLuigi Rizzooptions 	DUMMYNET
56868ec4eb6SLuigi Rizzooptions 	BRIDGE
56968e9d934SLuigi Rizzo
57098cb733cSKenneth D. Merry# Zero copy sockets support.  This enables "zero copy" for sending and
57198cb733cSKenneth D. Merry# receving data via a socket.  The send side works for any type of NIC,
57298cb733cSKenneth D. Merry# the receive side only works for NICs that support MTUs greater than the
57398cb733cSKenneth D. Merry# page size of your architecture and that support header splitting.  See
57498cb733cSKenneth D. Merry# zero_copy(9) for more details.
57598cb733cSKenneth D. Merryoptions 	ZERO_COPY_SOCKETS
57698cb733cSKenneth D. Merry
5773f8c4506SPoul-Henning Kamp#
5783f8c4506SPoul-Henning Kamp# ATM (HARP version) options
5793f8c4506SPoul-Henning Kamp#
5803f8c4506SPoul-Henning Kamp# ATM_CORE includes the base ATM functionality code.  This must be included
5813f8c4506SPoul-Henning Kamp#	for ATM support.
5823f8c4506SPoul-Henning Kamp#
5833f8c4506SPoul-Henning Kamp# ATM_IP includes support for running IP over ATM.
5843f8c4506SPoul-Henning Kamp#
5853f8c4506SPoul-Henning Kamp# At least one (and usually only one) of the following signalling managers
5863f8c4506SPoul-Henning Kamp# must be included (note that all signalling managers include PVC support):
5873f8c4506SPoul-Henning Kamp# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
5883f8c4506SPoul-Henning Kamp# ATM_SPANS includes support for the `spans' signalling manager, which runs
5893f8c4506SPoul-Henning Kamp#	the FORE Systems's proprietary SPANS signalling protocol.
5903f8c4506SPoul-Henning Kamp# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
5913f8c4506SPoul-Henning Kamp#	which run the ATM Forum UNI 3.x signalling protocols.
5923f8c4506SPoul-Henning Kamp#
5933f8c4506SPoul-Henning Kamp# The `hea' driver provides support for the Efficient Networks, Inc.
5943f8c4506SPoul-Henning Kamp# ENI-155p ATM PCI Adapter.
5953f8c4506SPoul-Henning Kamp#
5963f8c4506SPoul-Henning Kamp# The `hfa' driver provides support for the FORE Systems, Inc.
5973f8c4506SPoul-Henning Kamp# PCA-200E ATM PCI Adapter.
5983f8c4506SPoul-Henning Kamp#
5993f8c4506SPoul-Henning Kampoptions 	ATM_CORE		#core ATM protocol family
6003f8c4506SPoul-Henning Kampoptions 	ATM_IP			#IP over ATM support
6013f8c4506SPoul-Henning Kampoptions 	ATM_SIGPVC		#SIGPVC signalling manager
6023f8c4506SPoul-Henning Kampoptions 	ATM_SPANS		#SPANS signalling manager
6033f8c4506SPoul-Henning Kampoptions 	ATM_UNI			#UNI signalling manager
60426837af4SMatthew N. Dodd
60526837af4SMatthew N. Dodddevice		hea			#Efficient ENI-155p ATM PCI
60604961ff8SMike Barcroftdevice		hfa			#FORE PCA-200E ATM PCI
6073f8c4506SPoul-Henning Kamp
6086a8d6623SGarrett Wollman
6096a8d6623SGarrett Wollman#####################################################################
6106a8d6623SGarrett Wollman# FILESYSTEM OPTIONS
611e3178a06SJordan K. Hubbard
6122365e64fSRodney W. Grimes#
6136a8d6623SGarrett Wollman# Only the root, /usr, and /tmp filesystems need be statically
6146a8d6623SGarrett Wollman# compiled; everything else will be automatically loaded at mount
615888a8e35SPoul-Henning Kamp# time.  (Exception: the UFS family--- FFS --- cannot
6166a8d6623SGarrett Wollman# currently be demand-loaded.)  Some people still prefer to statically
6176a8d6623SGarrett Wollman# compile other filesystems as well.
6186a8d6623SGarrett Wollman#
619a5b88b01SKATO Takenori# NB: The NULL, PORTAL, UMAP and UNION filesystems are known to be
620a5b88b01SKATO Takenori# buggy, and WILL panic your system if you attempt to do anything with
621a5b88b01SKATO Takenori# them.  They are included here as an incentive for some enterprising
622a5b88b01SKATO Takenori# soul to sit down and fix them.
6232365e64fSRodney W. Grimes#
624f1a9c715SDavid Greenman
6256a8d6623SGarrett Wollman# One of these is mandatory:
6266a8d6623SGarrett Wollmanoptions 	FFS			#Fast filesystem
627eb25edbdSPeter Wemmoptions 	NFSCLIENT		#Network File System
628eb25edbdSPeter Wemmoptions 	NFSSERVER		#Network File System
6296a8d6623SGarrett Wollman
6306a8d6623SGarrett Wollman# The rest are optional:
6315895e3c8SPeter Wemmoptions 	CD9660			#ISO 9660 filesystem
63299d300a1SRuslan Ermilovoptions 	FDESCFS			#File descriptor filesystem
6330adb9b96SPeter Wemmoptions 	HPFS			#OS/2 File system
634dba11ce5SAlexander Langeroptions 	MSDOSFS			#MS DOS File System (FAT, FAT32)
6353ee9bf69SEivind Eklundoptions 	NTFS			#NT File System
636f1a9c715SDavid Greenmanoptions 	NULLFS			#NULL filesystem
637b40ce416SJulian Elischer#options 	NWFS			#NetWare filesystem
63899d300a1SRuslan Ermilovoptions 	PORTALFS		#Portal filesystem
6394d2647f9SDag-Erling Smørgravoptions 	PROCFS			#Process filesystem (requires PSEUDOFS)
64052ebde4fSDag-Erling Smørgravoptions 	PSEUDOFS		#Pseudo-filesystem framework
641daaa73b5SRobert Watsonoptions 	SMBFS			#SMB/CIFS filesystem
642df263cbdSScott Longoptions 	UDF			#Universal Disk Format
643f1a9c715SDavid Greenmanoptions 	UMAPFS			#UID map filesystem
64499d300a1SRuslan Ermilovoptions 	UNIONFS			#Union filesystem
645ab9f3b29SPoul-Henning Kamp# options 	NODEVFS			#disable devices filesystem
646bcf77694SPeter Wemm# The xFS_ROOT options REQUIRE the associated ``options xFS''
647bcf77694SPeter Wemmoptions 	NFS_ROOT		#NFS usable as root device
648f1a9c715SDavid Greenman
649d0a28bafSAlexander Langer# Soft updates is a technique for improving filesystem speed and
650d61e6649SAlexander Langer# making abrupt shutdown less risky.
651f8f8d7afSEivind Eklund#
6523d5c4fdcSPoul-Henning Kampoptions 	SOFTUPDATES
653b1897c19SJulian Elischer
654a64ed089SRobert Watson# Extended attributes allow additional data to be associated with files,
65551be6918SChris D. Faulhaber# and is used for ACLs, Capabilities, and MAC labels.
65651be6918SChris D. Faulhaber# See src/sys/ufs/ufs/README.extattr for more information.
65749993db0SRobert Watsonoptions 	UFS_EXTATTR
65849993db0SRobert Watsonoptions 	UFS_EXTATTR_AUTOSTART
659a64ed089SRobert Watson
66051be6918SChris D. Faulhaber# Access Control List support for UFS filesystems.  The current ACL
66151be6918SChris D. Faulhaber# implementation requires extended attribute support, UFS_EXTATTR,
66251be6918SChris D. Faulhaber# for the underlying filesystem.
66351be6918SChris D. Faulhaber# See src/sys/ufs/ufs/README.acls for more information.
66451be6918SChris D. Faulhaberoptions 	UFS_ACL
66551be6918SChris D. Faulhaber
6669b5ad47fSIan Dowse# Directory hashing improves the speed of operations on very large
6679b5ad47fSIan Dowse# directories at the expense of some memory.
6689b5ad47fSIan Dowseoptions 	UFS_DIRHASH
6699b5ad47fSIan Dowse
67071e4fff8SPoul-Henning Kamp# Make space in the kernel for a root filesystem on a md device.
67171e4fff8SPoul-Henning Kamp# Define to the number of kilobytes to reserve for the filesystem.
67271e4fff8SPoul-Henning Kampoptions 	MD_ROOT_SIZE=10
67371e4fff8SPoul-Henning Kamp
67471e4fff8SPoul-Henning Kamp# Make the md device a potential root device, either with preloaded
67571e4fff8SPoul-Henning Kamp# images of type mfs_root or md_root.
67671e4fff8SPoul-Henning Kampoptions 	MD_ROOT
677d52d7365SPoul-Henning Kamp
678a401ebbeSDavid Greenman# Allow this many swap-devices.
6798f7939aeSMatthew Dillon#
6808f7939aeSMatthew Dillon# In order to manage swap, the system must reserve bitmap space that
6818f7939aeSMatthew Dillon# scales with the largest mounted swap device multiplied by NSWAPDEV,
6828f7939aeSMatthew Dillon# irregardless of whether other swap devices exist or not.  So it
6838f7939aeSMatthew Dillon# is not a good idea to make this value too large.
6842727da4cSDag-Erling Smørgravoptions 	NSWAPDEV=5
685a401ebbeSDavid Greenman
686495967e4SEivind Eklund# Disk quotas are supported when this option is enabled.
6872365e64fSRodney W. Grimesoptions 	QUOTA			#enable disk quotas
6886a8d6623SGarrett Wollman
689276756a4SDag-Erling Smørgrav# If you are running a machine just as a fileserver for PC and MAC
690276756a4SDag-Erling Smørgrav# users, using SAMBA or Netatalk, you may consider setting this option
691276756a4SDag-Erling Smørgrav# and keeping all those users' directories on a filesystem that is
692276756a4SDag-Erling Smørgrav# mounted with the suiddir option. This gives new files the same
693ec4e5afbSRobert Nordier# ownership as the directory (similar to group). It's a security hole
6946110161fSDag-Erling Smørgrav# if you let these users run programs, so confine it to file-servers
695276756a4SDag-Erling Smørgrav# (but it'll save you lots of headaches in those cases). Root owned
696276756a4SDag-Erling Smørgrav# directories are exempt and X bits are cleared. The suid bit must be
697276756a4SDag-Erling Smørgrav# set on the directory as well; see chmod(1) PC owners can't see/set
698276756a4SDag-Erling Smørgrav# ownerships so they keep getting their toes trodden on. This saves
699276756a4SDag-Erling Smørgrav# you all the support calls as the filesystem it's used on will act as
700276756a4SDag-Erling Smørgrav# they expect: "It's my dir so it must be my file".
701cb800e34SJulian Elischer#
702cb800e34SJulian Elischeroptions 	SUIDDIR
703cb800e34SJulian Elischer
704df394affSJohn-Mark Gurney# NFS options:
7055895e3c8SPeter Wemmoptions 	NFS_MINATTRTIMO=3	# VREG attrib cache timeout in sec
7065895e3c8SPeter Wemmoptions 	NFS_MAXATTRTIMO=60
7075895e3c8SPeter Wemmoptions 	NFS_MINDIRATTRTIMO=30	# VDIR attrib cache timeout in sec
7085895e3c8SPeter Wemmoptions 	NFS_MAXDIRATTRTIMO=60
7095895e3c8SPeter Wemmoptions 	NFS_GATHERDELAY=10	# Default write gather delay (msec)
7105895e3c8SPeter Wemmoptions 	NFS_WDELAYHASHSIZ=16	# and with this
711df394affSJohn-Mark Gurneyoptions 	NFS_DEBUG		# Enable NFS Debugging
712df394affSJohn-Mark Gurney
7139afcea2fSRobert V. Baron# Coda stuff:
7149afcea2fSRobert V. Baronoptions 	CODA			#CODA filesystem.
715f71c01ccSPeter Wemmdevice		vcoda	4		#coda minicache <-> venus comm.
716a1d55890SJordan K. Hubbard
717053a2b61SEivind Eklund#
718053a2b61SEivind Eklund# Add support for the EXT2FS filesystem of Linux fame.  Be a bit
719053a2b61SEivind Eklund# careful with this - the ext2fs code has a tendency to lag behind
720053a2b61SEivind Eklund# changes and not be exercised very much, so mounting read/write could
721053a2b61SEivind Eklund# be dangerous (and even mounting read only could result in panics.)
722053a2b61SEivind Eklund#
7235895e3c8SPeter Wemmoptions 	EXT2FS
724053a2b61SEivind Eklund
725dd85920aSJason Evans# Use real implementations of the aio_* system calls.  There are numerous
7260cbe2ad6SRobert Watson# stability and security issues in the current aio code that make it
7270cbe2ad6SRobert Watson# unsuitable for inclusion on machines with untrusted local users.
728dd85920aSJason Evansoptions 	VFS_AIO
729053a2b61SEivind Eklund
730c16dc61bSEivind Eklund# Enable the code UFS IO optimization through the VM system.  This allows
731c16dc61bSEivind Eklund# use VM operations instead of copying operations when possible.
732c16dc61bSEivind Eklund#
733c16dc61bSEivind Eklund# Even with this enabled, actual use of the code is still controlled by the
734c16dc61bSEivind Eklund# sysctl vfs.ioopt.  0 gives no optimization, 1 gives normal (use VM
735c16dc61bSEivind Eklund# operations if a request happens to fit), 2 gives agressive optimization
736c16dc61bSEivind Eklund# (the operations are split to do as much as possible through the VM system.)
737c16dc61bSEivind Eklund#
738c16dc61bSEivind Eklund# Enabling this will probably not give an overall speedup except for
739c16dc61bSEivind Eklund# special workloads.
740c16dc61bSEivind Eklundoptions 	ENABLE_VFS_IOOPT
741c16dc61bSEivind Eklund
74215bbdecfSMark Murray# Cryptographically secure random number generator; /dev/[u]random
743ac519db0SMark Murraydevice		random
74415bbdecfSMark Murray
7456a8d6623SGarrett Wollman
7466a8d6623SGarrett Wollman#####################################################################
747abc97a06SBruce Evans# POSIX P1003.1B
748abc97a06SBruce Evans
749ec4e5afbSRobert Nordier# Real time extensions added in the 1993 Posix
750abc97a06SBruce Evans# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
751abc97a06SBruce Evans
7525895e3c8SPeter Wemmoptions 	_KPOSIX_PRIORITY_SCHEDULING
7538cbf4973SAlfred Perlstein# p1003_1b_semaphores are very experimental,
7548cbf4973SAlfred Perlstein# user should be ready to assist in debugging if problems arise.
7553ffb9fadSAlfred Perlsteinoptions		P1003_1B_SEMAPHORES
756abc97a06SBruce Evans
757abc97a06SBruce Evans
758abc97a06SBruce Evans#####################################################################
75912e9f256SRobert Watson# SECURITY POLICY PARAMETERS
76012e9f256SRobert Watson
761cd6d1d76SBruce Evans# Support for Mandatory Access Control (MAC):
762cd6d1d76SBruce Evansoptions 	MAC
763eae2f20cSRobert Watsonoptions 	MAC_BIBA
764eae2f20cSRobert Watsonoptions 	MAC_BSDEXTENDED
765cd6d1d76SBruce Evansoptions 	MAC_DEBUG
766eae2f20cSRobert Watsonoptions 	MAC_IFOFF
767eae2f20cSRobert Watsonoptions 	MAC_MLS
768eae2f20cSRobert Watsonoptions 	MAC_NONE
769eae2f20cSRobert Watsonoptions 	MAC_PARTITION
770eae2f20cSRobert Watsonoptions 	MAC_SEEOTHERUIDS
771eae2f20cSRobert Watsonoptions 	MAC_TEST
77212e9f256SRobert Watson
77312e9f256SRobert Watson
77412e9f256SRobert Watson#####################################################################
775000033d0SJeroen Ruigrok van der Werven# CLOCK OPTIONS
776000033d0SJeroen Ruigrok van der Werven
777000033d0SJeroen Ruigrok van der Werven# The granularity of operation is controlled by the kernel option HZ whose
778c578eeb3SLuigi Rizzo# default value (100) means a granularity of 10ms (1s/HZ).
779c578eeb3SLuigi Rizzo# Some subsystems, such as DUMMYNET, might benefit from a smaller
780c578eeb3SLuigi Rizzo# granularity such as 1ms or less, for a smoother scheduling of packets.
781c578eeb3SLuigi Rizzo# Consider, however, that reducing the granularity too much might
782c578eeb3SLuigi Rizzo# cause excessive overhead in clock interrupt processing,
783c578eeb3SLuigi Rizzo# potentially causing ticks to be missed and thus actually reducing
784000033d0SJeroen Ruigrok van der Werven# the accuracy of operation.
785000033d0SJeroen Ruigrok van der Werven
786000033d0SJeroen Ruigrok van der Wervenoptions 	HZ=100
787000033d0SJeroen Ruigrok van der Werven
788f309f881SJohn Baldwin# If you see the "calcru: negative time of %ld usec for pid %d (%s)\n"
789f309f881SJohn Baldwin# message you probably have some broken sw/hw which disables interrupts
790f309f881SJohn Baldwin# for too long.  You can make the system more resistant to this by
791f309f881SJohn Baldwin# choosing a high value for NTIMECOUNTER.  The default is 5, there
792f309f881SJohn Baldwin# is no upper limit but more than a couple of hundred are not productive.
793f309f881SJohn Baldwin
794f309f881SJohn Baldwinoptions 	NTIMECOUNTER=20
795f309f881SJohn Baldwin
796f309f881SJohn Baldwin# Enable support for the kernel PLL to use an external PPS signal,
797f309f881SJohn Baldwin# under supervision of [x]ntpd(8)
798f309f881SJohn Baldwin# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
799f309f881SJohn Baldwin
800f309f881SJohn Baldwinoptions 	PPS_SYNC
801f309f881SJohn Baldwin
802000033d0SJeroen Ruigrok van der Werven
803000033d0SJeroen Ruigrok van der Werven#####################################################################
804de6a307eSPeter Dufault# SCSI DEVICES
805de6a307eSPeter Dufault
8066a8d6623SGarrett Wollman# SCSI DEVICE CONFIGURATION
8076a8d6623SGarrett Wollman
8086a8d6623SGarrett Wollman# The SCSI subsystem consists of the `base' SCSI code, a number of
809ebc1a0e2SPeter Dufault# high-level SCSI device `type' drivers, and the low-level host-adapter
8106a8d6623SGarrett Wollman# device drivers.  The host adapters are listed in the ISA and PCI
8116a8d6623SGarrett Wollman# device configuration sections below.
8126a8d6623SGarrett Wollman#
813265368d4SRodney W. Grimes# Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so
814ebc1a0e2SPeter Dufault# that a given bus, target, and LUN always come on line as the same
815ebc1a0e2SPeter Dufault# device unit.  In earlier versions the unit numbers were assigned
816ebc1a0e2SPeter Dufault# in the order that the devices were probed on the SCSI bus.  This
817ebc1a0e2SPeter Dufault# means that if you removed a disk drive, you may have had to rewrite
818ebc1a0e2SPeter Dufault# your /etc/fstab file, and also that you had to be careful when adding
819ebc1a0e2SPeter Dufault# a new disk as it may have been probed earlier and moved your device
820ebc1a0e2SPeter Dufault# configuration around.
821ebc1a0e2SPeter Dufault
822ebc1a0e2SPeter Dufault# This old behavior is maintained as the default behavior.  The unit
823ebc1a0e2SPeter Dufault# assignment begins with the first non-wired down unit for a device
824700daf5eSJustin T. Gibbs# type.  For example, if you wire a disk as "da3" then the first
825700daf5eSJustin T. Gibbs# non-wired disk will be assigned da4.
826ebc1a0e2SPeter Dufault
827ebc1a0e2SPeter Dufault# The syntax for wiring down devices is:
828ebc1a0e2SPeter Dufault
829f71c01ccSPeter Wemmhint.scbus.0.at="ahc0"
830f71c01ccSPeter Wemmhint.scbus.1.at="ahc1"
831f71c01ccSPeter Wemmhint.scbus.1.bus="0"
832f71c01ccSPeter Wemmhint.scbus.3.at="ahc2"
833f71c01ccSPeter Wemmhint.scbus.3.bus="0"
834f71c01ccSPeter Wemmhint.scbus.2.at="ahc2"
835f71c01ccSPeter Wemmhint.scbus.2.bus="1"
836f71c01ccSPeter Wemmhint.da.0.at="scbus0"
837f71c01ccSPeter Wemmhint.da.0.target="0"
838f71c01ccSPeter Wemmhint.da.0.unit="0"
839f71c01ccSPeter Wemmhint.da.1.at="scbus3"
840f71c01ccSPeter Wemmhint.da.1.target="1"
841f71c01ccSPeter Wemmhint.da.2.at="scbus2"
842f71c01ccSPeter Wemmhint.da.2.target="3"
843f71c01ccSPeter Wemmhint.sa.1.at="scbus1"
844f71c01ccSPeter Wemmhint.sa.1.target="6"
845ebc1a0e2SPeter Dufault
846ebc1a0e2SPeter Dufault# "units" (SCSI logical unit number) that are not specified are
847ebc1a0e2SPeter Dufault# treated as if specified as LUN 0.
848ebc1a0e2SPeter Dufault
849ebc1a0e2SPeter Dufault# All SCSI devices allocate as many units as are required.
850ebc1a0e2SPeter Dufault
851cf2458c9SMatt Jacob# The ch driver drives SCSI Media Changer ("jukebox") devices.
852cf2458c9SMatt Jacob#
853cf2458c9SMatt Jacob# The da driver drives SCSI Direct Access ("disk") and Optical Media
854cf2458c9SMatt Jacob# ("WORM") devices.
855cf2458c9SMatt Jacob#
856cf2458c9SMatt Jacob# The sa driver drives SCSI Sequential Access ("tape") devices.
857cf2458c9SMatt Jacob#
858cf2458c9SMatt Jacob# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
859cf2458c9SMatt Jacob#
860cf2458c9SMatt Jacob# The ses driver drives SCSI Envinronment Services ("ses") and
861cf2458c9SMatt Jacob# SAF-TE ("SCSI Accessable Fault-Tolerant Enclosure") devices.
862cf2458c9SMatt Jacob#
863cf2458c9SMatt Jacob# The pt driver drives SCSI Processor devices.
864cf2458c9SMatt Jacob#
865cf2458c9SMatt Jacob#
866cf2458c9SMatt Jacob# Target Mode support is provided here but also requires that a SIM
867cf2458c9SMatt Jacob# (SCSI Host Adapter Driver) provide support as well.
868cf2458c9SMatt Jacob#
869cf2458c9SMatt Jacob# The targ driver provides target mode support as a Processor type device.
870cf2458c9SMatt Jacob# It exists to give the minimal context necessary to respond to Inquiry
871cf2458c9SMatt Jacob# commands. There is a sample user application that shows how the rest
872cf2458c9SMatt Jacob# of the command support might be done in /usr/share/examples/scsi_target.
873cf2458c9SMatt Jacob#
874cf2458c9SMatt Jacob# The targbh driver provides target mode support and exists to respond
875cf2458c9SMatt Jacob# to incoming commands that do not otherwise have a logical unit assigned
876cf2458c9SMatt Jacob# to them.
877cf2458c9SMatt Jacob#
878265368d4SRodney W. Grimes# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
879cf2458c9SMatt Jacob# configuration as the "pass" driver.
880ebc1a0e2SPeter Dufault
881c9953c3bSPeter Wemmdevice		scbus		#base SCSI code
882c9953c3bSPeter Wemmdevice		ch		#SCSI media changers
883c9953c3bSPeter Wemmdevice		da		#SCSI direct access devices (aka disks)
884c9953c3bSPeter Wemmdevice		sa		#SCSI tapes
885c9953c3bSPeter Wemmdevice		cd		#SCSI CD-ROMs
88664ed91d5SMatt Jacobdevice		ses		#SCSI Environmental Services (and SAF-TE)
887cf2458c9SMatt Jacobdevice		pt		#SCSI processor
88864ed91d5SMatt Jacobdevice		targ		#SCSI Target Mode Code
88964ed91d5SMatt Jacobdevice		targbh		#SCSI Target Mode Blackhole Device
890cf2458c9SMatt Jacobdevice		pass		#CAM passthrough driver
8918909a72bSPeter Dufault
892700daf5eSJustin T. Gibbs# CAM OPTIONS:
893700daf5eSJustin T. Gibbs# debugging options:
894700daf5eSJustin T. Gibbs# -- NOTE --  If you specify one of the bus/target/lun options, you must
895700daf5eSJustin T. Gibbs#             specify them all!
896700daf5eSJustin T. Gibbs# CAMDEBUG: When defined enables debugging macros
897700daf5eSJustin T. Gibbs# CAM_DEBUG_BUS:  Debug the given bus.  Use -1 to debug all busses.
898700daf5eSJustin T. Gibbs# CAM_DEBUG_TARGET:  Debug the given target.  Use -1 to debug all targets.
899700daf5eSJustin T. Gibbs# CAM_DEBUG_LUN:  Debug the given lun.  Use -1 to debug all luns.
900d05caa00SKenneth D. Merry# CAM_DEBUG_FLAGS:  OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
901d05caa00SKenneth D. Merry#                   CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
902700daf5eSJustin T. Gibbs#
903700daf5eSJustin T. Gibbs# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
904b29f9e40SMatt Jacob# CAM_NEW_TRAN_CODE: this is the new transport layer code that will be switched
905b29f9e40SMatt Jacob#			to soon
906700daf5eSJustin T. Gibbs# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
907700daf5eSJustin T. Gibbs# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
90856234437SKenneth D. Merry# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
90956234437SKenneth D. Merry#             queue after a bus reset, and the number of milliseconds to
9103a937198SBrooks Davis#             freeze the device queue after a bus device reset.  This
9113a937198SBrooks Davis#             can be changed at boot and runtime with the
9123a937198SBrooks Davis#             kern.cam.scsi_delay tunable/sysctl.
913700daf5eSJustin T. Gibbsoptions 	CAMDEBUG
9145895e3c8SPeter Wemmoptions 	CAM_DEBUG_BUS=-1
9155895e3c8SPeter Wemmoptions 	CAM_DEBUG_TARGET=-1
9165895e3c8SPeter Wemmoptions 	CAM_DEBUG_LUN=-1
91725388b6cSBruce Evansoptions 	CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
9185895e3c8SPeter Wemmoptions 	CAM_MAX_HIGHPOWER=4
919700daf5eSJustin T. Gibbsoptions 	SCSI_NO_SENSE_STRINGS
920700daf5eSJustin T. Gibbsoptions 	SCSI_NO_OP_STRINGS
92156234437SKenneth D. Merryoptions 	SCSI_DELAY=8000	# Be pessimistic about Joe SCSI device
9221a7c583cSGarrett Wollman
923700daf5eSJustin T. Gibbs# Options for the CAM CDROM driver:
924700daf5eSJustin T. Gibbs# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
925700daf5eSJustin T. Gibbs# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
926700daf5eSJustin T. Gibbs#                           enforced if there is I/O waiting for another LUN
927700daf5eSJustin T. Gibbs# The compiled in defaults for these variables are 2 and 10 seconds,
928700daf5eSJustin T. Gibbs# respectively.
92993063432SJoerg Wunsch#
930700daf5eSJustin T. Gibbs# These can also be changed on the fly with the following sysctl variables:
931700daf5eSJustin T. Gibbs# kern.cam.cd.changer.min_busy_seconds
932700daf5eSJustin T. Gibbs# kern.cam.cd.changer.max_busy_seconds
93393063432SJoerg Wunsch#
9345895e3c8SPeter Wemmoptions 	CHANGER_MIN_BUSY_SECONDS=2
9355895e3c8SPeter Wemmoptions 	CHANGER_MAX_BUSY_SECONDS=10
93693063432SJoerg Wunsch
9379dfb4471SKenneth D. Merry# Options for the CAM sequential access driver:
938b29f9e40SMatt Jacob# SA_IO_TIMEOUT: Timeout for read/write/wfm  operations, in minutes
9399dfb4471SKenneth D. Merry# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
9409dfb4471SKenneth D. Merry# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
9419dfb4471SKenneth D. Merry# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
9429f050ed5SMatt Jacob# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
94325388b6cSBruce Evansoptions 	SA_IO_TIMEOUT=4
94425388b6cSBruce Evansoptions 	SA_SPACE_TIMEOUT=60
94525388b6cSBruce Evansoptions 	SA_REWIND_TIMEOUT=(2*60)
94625388b6cSBruce Evansoptions 	SA_ERASE_TIMEOUT=(4*60)
9479f050ed5SMatt Jacoboptions 	SA_1FM_AT_EOD
9489dfb4471SKenneth D. Merry
9493ece1bd2SKenneth D. Merry# Optional timeout for the CAM processor target (pt) device
9503ece1bd2SKenneth D. Merry# This is specified in seconds.  The default is 60 seconds.
95125388b6cSBruce Evansoptions 	SCSI_PT_DEFAULT_TIMEOUT=60
9523ece1bd2SKenneth D. Merry
9538904e70bSMatt Jacob# Optional enable of doing SES passthrough on other devices (e.g., disks)
9548904e70bSMatt Jacob#
9558904e70bSMatt Jacob# Normally disabled because a lot of newer SCSI disks report themselves
9568904e70bSMatt Jacob# as having SES capabilities, but this can then clot up attempts to build
9578904e70bSMatt Jacob# build a topology with the SES device that's on the box these drives
9588904e70bSMatt Jacob# are in....
9598904e70bSMatt Jacoboptions 	SES_ENABLE_PASSTHROUGH
9608904e70bSMatt Jacob
9616a8d6623SGarrett Wollman
9626a8d6623SGarrett Wollman#####################################################################
9636a8d6623SGarrett Wollman# MISCELLANEOUS DEVICES AND OPTIONS
9646a8d6623SGarrett Wollman
9651160da92SJoerg Wunsch# The `pty' device usually turns out to be ``effectively mandatory'',
9661160da92SJoerg Wunsch# as it is required for `telnetd', `rlogind', `screen', `emacs', and
9671160da92SJoerg Wunsch# `xterm', among others.
9681160da92SJoerg Wunsch
969f71c01ccSPeter Wemmdevice		pty		#Pseudo ttys
9706d823e81SJulian Elischerdevice		nmdm		#back-to-back tty devices
971f71c01ccSPeter Wemmdevice		md		#Memory/malloc disk
972f71c01ccSPeter Wemmdevice		snp		#Snoop device - to look at pty/vty/etc..
973efacde1bSBrooks Davisdevice		ccd		#Concatenated disk driver
974be174c7eSGreg Lehey
975be174c7eSGreg Lehey# Configuring Vinum into the kernel is not necessary, since the kld
976be174c7eSGreg Lehey# module gets started automatically when vinum(8) starts.  This
977be174c7eSGreg Lehey# device is also untested.  Use at your own risk.
9784cc4752cSGreg Lehey#
9794cc4752cSGreg Lehey# The option VINUMDEBUG must match the value set in CFLAGS
98098a44096SSheldon Hearn# in src/sbin/vinum/Makefile.  Failure to do so will result in
9814cc4752cSGreg Lehey# the following message from vinum(8):
9824cc4752cSGreg Lehey#
9834cc4752cSGreg Lehey# Can't get vinum config: Invalid argument
9844cc4752cSGreg Lehey#
9854cc4752cSGreg Lehey# see vinum(4) for more reasons not to use these options.
986f71c01ccSPeter Wemmdevice		vinum		#Vinum concat/mirror/raid driver
9873ea799d5SPeter Wemmoptions 	VINUMDEBUG	#enable Vinum debugging hooks
9889ba0e7c3SBruce Evans
989f9d186edSScott Long# RAIDframe device.  RAID_AUTOCONFIG allows RAIDframe to search all of the
990f9d186edSScott Long# disk devices in the system looking for components that it recognizes (already
991f9d186edSScott Long# configured once before) and auto-configured them into arrays.
992f9d186edSScott Longdevice		raidframe
993f9d186edSScott Longoptions		RAID_AUTOCONFIG
994f9d186edSScott Long
9956f2d8adbSBoris Popov# Kernel side iconv library
9966f2d8adbSBoris Popovoptions 	LIBICONV
9976f2d8adbSBoris Popov
99858067a99SPoul-Henning Kamp# Size of the kernel message buffer.  Should be N * pagesize.
9995895e3c8SPeter Wemmoptions 	MSGBUF_SIZE=40960
100058067a99SPoul-Henning Kamp
10016a8d6623SGarrett Wollman
10026a8d6623SGarrett Wollman#####################################################################
1003d61e6649SAlexander Langer# HARDWARE DEVICE CONFIGURATION
1004d61e6649SAlexander Langer
1005d61e6649SAlexander Langer# For ISA the required hints are listed.
1006d61e6649SAlexander Langer# EISA, MCA, PCI and pccard are self identifying buses, so no hints
1007d61e6649SAlexander Langer# are needed.
1008d61e6649SAlexander Langer
1009d61e6649SAlexander Langer#
1010d61e6649SAlexander Langer# Mandatory devices:
1011d61e6649SAlexander Langer#
1012d61e6649SAlexander Langer
10137f5092f3SJohn Baldwin# The keyboard controller; it controls the keyboard and the PS/2 mouse.
1014f453022cSPeter Wemmdevice		atkbdc
10157f5092f3SJohn Baldwinhint.atkbdc.0.at="isa"
10167f5092f3SJohn Baldwinhint.atkbdc.0.port="0x060"
10177f5092f3SJohn Baldwin
10187f5092f3SJohn Baldwin# The AT keyboard
10197f5092f3SJohn Baldwindevice		atkbd
10207f5092f3SJohn Baldwinhint.atkbd.0.at="atkbdc"
10217f5092f3SJohn Baldwinhint.atkbd.0.irq="1"
10227f5092f3SJohn Baldwin
10237f5092f3SJohn Baldwin# Options for atkbd:
10247f5092f3SJohn Baldwinoptions 	ATKBD_DFLT_KEYMAP	# specify the built-in keymap
102525388b6cSBruce Evansmakeoptions	ATKBD_DFLT_KEYMAP=jp.106
10267f5092f3SJohn Baldwin
10277f5092f3SJohn Baldwin# These options are valid for other keyboard drivers as well.
10287f5092f3SJohn Baldwinoptions 	KBD_DISABLE_KEYMAP_LOAD	# refuse to load a keymap
10297f5092f3SJohn Baldwinoptions 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
10307f5092f3SJohn Baldwin
10317f5092f3SJohn Baldwin# `flags' for atkbd:
10327f5092f3SJohn Baldwin#       0x01    Force detection of keyboard, else we always assume a keyboard
10337f5092f3SJohn Baldwin#       0x02    Don't reset keyboard, useful for some newer ThinkPads
10347f5092f3SJohn Baldwin#	0x03	Force detection and avoid reset, might help with certain
10357f5092f3SJohn Baldwin#		dockingstations
10367f5092f3SJohn Baldwin#       0x04    Old-style (XT) keyboard support, useful for older ThinkPads
10377f5092f3SJohn Baldwin
10387f5092f3SJohn Baldwin# PS/2 mouse
10397f5092f3SJohn Baldwindevice		psm
10407f5092f3SJohn Baldwinhint.psm.0.at="atkbdc"
10417f5092f3SJohn Baldwinhint.psm.0.irq="12"
10427f5092f3SJohn Baldwin
10437f5092f3SJohn Baldwin# Options for psm:
10447f5092f3SJohn Baldwinoptions 	PSM_HOOKRESUME		#hook the system resume event, useful
10457f5092f3SJohn Baldwin					#for some laptops
10467f5092f3SJohn Baldwinoptions 	PSM_RESETAFTERSUSPEND	#reset the device at the resume event
10477f5092f3SJohn Baldwin
1048722e9593SJohn Baldwin# Video card driver for VGA adapters.
10497f5092f3SJohn Baldwindevice		vga
10507f5092f3SJohn Baldwinhint.vga.0.at="isa"
10517f5092f3SJohn Baldwin
10527f5092f3SJohn Baldwin# Options for vga:
10537f5092f3SJohn Baldwin# Try the following option if the mouse pointer is not drawn correctly
10547f5092f3SJohn Baldwin# or font does not seem to be loaded properly.  May cause flicker on
10557f5092f3SJohn Baldwin# some systems.
10567f5092f3SJohn Baldwinoptions 	VGA_ALT_SEQACCESS
10577f5092f3SJohn Baldwin
10587f5092f3SJohn Baldwin# If you can dispense with some vga driver features, you may want to
10597f5092f3SJohn Baldwin# use the following options to save some memory.
10607f5092f3SJohn Baldwin#options 	VGA_NO_FONT_LOADING	# don't save/load font
10617f5092f3SJohn Baldwin#options 	VGA_NO_MODE_CHANGE	# don't change video modes
10627f5092f3SJohn Baldwin
10637f5092f3SJohn Baldwin# Older video cards may require this option for proper operation.
10647f5092f3SJohn Baldwinoptions 	VGA_SLOW_IOACCESS	# do byte-wide i/o's to TS and GDC regs
10657f5092f3SJohn Baldwin
10667f5092f3SJohn Baldwin# The following option probably won't work with the LCD displays.
10677f5092f3SJohn Baldwinoptions 	VGA_WIDTH90		# support 90 column modes
10687f5092f3SJohn Baldwin
10697f5092f3SJohn Baldwinoptions 	FB_DEBUG		# Frame buffer debugging
10707f5092f3SJohn Baldwinoptions 	FB_INSTALL_CDEV		# install a CDEV entry in /dev
10717f5092f3SJohn Baldwin
1072dde04295SJohn Baldwindevice		splash			# Splash screen and screen saver support
10737f5092f3SJohn Baldwin
10747f5092f3SJohn Baldwin# Various screen savers.
10757f5092f3SJohn Baldwindevice		blank_saver
10767f5092f3SJohn Baldwindevice		daemon_saver
10777f5092f3SJohn Baldwindevice		fade_saver
10787f5092f3SJohn Baldwindevice		fire_saver
10797f5092f3SJohn Baldwindevice		green_saver
10807f5092f3SJohn Baldwindevice		logo_saver
10817f5092f3SJohn Baldwindevice		rain_saver
10827f5092f3SJohn Baldwindevice		star_saver
10837f5092f3SJohn Baldwindevice		warp_saver
10847f5092f3SJohn Baldwin
1085ee16b430SBruce Evans# The syscons console driver (sco color console compatible).
1086f453022cSPeter Wemmdevice		sc
1087f71c01ccSPeter Wemmhint.sc.0.at="isa"
1088683cbdf4SBruce Evansoptions 	MAXCONS=16		# number of virtual consoles
10896e8394b8SKazutaka YOKOTAoptions 	SC_ALT_MOUSE_IMAGE	# simplified mouse cursor in text mode
10906e8394b8SKazutaka YOKOTAoptions 	SC_DFLT_FONT		# compile font in
1091cc6c2ad0SPeter Wemmmakeoptions	SC_DFLT_FONT=cp850
10926e8394b8SKazutaka YOKOTAoptions 	SC_DISABLE_DDBKEY	# disable `debug' key
1093c4118fc0SKazutaka YOKOTAoptions 	SC_DISABLE_REBOOT	# disable reboot key sequence
10946e8394b8SKazutaka YOKOTAoptions 	SC_HISTORY_SIZE=200	# number of history buffer lines
10956e8394b8SKazutaka YOKOTAoptions 	SC_MOUSE_CHAR=0x3	# char code for text mode mouse cursor
10966e8394b8SKazutaka YOKOTAoptions 	SC_PIXEL_MODE		# add support for the raster text mode
109785e36760SJordan K. Hubbard
10987a88382dSKazutaka YOKOTA# The following options will let you change the default colors of syscons.
109925388b6cSBruce Evansoptions 	SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
110025388b6cSBruce Evansoptions 	SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
110125388b6cSBruce Evansoptions 	SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
110225388b6cSBruce Evansoptions 	SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
11037a88382dSKazutaka YOKOTA
110478f45204SMaxim Sobolev# The following options will let you change the default behaviour of
110578f45204SMaxim Sobolev# cut-n-paste feature
110678f45204SMaxim Sobolevoptions 	SC_CUT_SPACES2TABS	# convert leading spaces into tabs
110725388b6cSBruce Evansoptions 	SC_CUT_SEPCHARS=\"x09\"	# set of characters that delimit words
110825388b6cSBruce Evans					# (default is single space - \"x20\")
110978f45204SMaxim Sobolev
11107a88382dSKazutaka YOKOTA# If you have a two button mouse, you may want to add the following option
11117a88382dSKazutaka YOKOTA# to use the right button of the mouse to paste text.
11127a88382dSKazutaka YOKOTAoptions 	SC_TWOBUTTON_MOUSE
11137a88382dSKazutaka YOKOTA
11146e8394b8SKazutaka YOKOTA# You can selectively disable features in syscons.
11156e8394b8SKazutaka YOKOTAoptions 	SC_NO_CUTPASTE
11166e8394b8SKazutaka YOKOTAoptions 	SC_NO_FONT_LOADING
11176e8394b8SKazutaka YOKOTAoptions 	SC_NO_HISTORY
11186e8394b8SKazutaka YOKOTAoptions 	SC_NO_SYSMOUSE
1119c42946c4SMitsuru IWASAKIoptions 	SC_NO_SUSPEND_VTYSWITCH
11202ac8be82SAndreas Schulz
11218a28ce0eSJohn Baldwin# `flags' for sc
11228a28ce0eSJohn Baldwin#	0x80	Put the video card in the VESA 800x600 dots, 16 color mode
11238a28ce0eSJohn Baldwin#	0x100	Probe for a keyboard device periodically if one is not present
11248a28ce0eSJohn Baldwin
11251fe04850SBruce Evans#
1126d61e6649SAlexander Langer# Optional devices:
11276a8d6623SGarrett Wollman#
11286a8d6623SGarrett Wollman
11297f5092f3SJohn Baldwin# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create
11307f5092f3SJohn Baldwin# the /dev/3dfx0 device to work with glide implementations. This should get
11317f5092f3SJohn Baldwin# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as
11327f5092f3SJohn Baldwin# the tdfx DRI module from XFree86 and is completely unrelated.
11337f5092f3SJohn Baldwin#
11347f5092f3SJohn Baldwin# To enable Linuxulator support, one must also include COMPAT_LINUX in the
11357f5092f3SJohn Baldwin# config as well, or you will not have the dependencies. The other option
11367f5092f3SJohn Baldwin# is to load both as modules.
11377f5092f3SJohn Baldwin
11387f5092f3SJohn Baldwindevice 		tdfx			# Enable 3Dfx Voodoo support
11397f5092f3SJohn Baldwinoptions 	TDFX_LINUX		# Enable Linuxulator support
11407f5092f3SJohn Baldwin
11416a8d6623SGarrett Wollman#
1142d61e6649SAlexander Langer# SCSI host adapters:
11436a8d6623SGarrett Wollman#
11447f5092f3SJohn Baldwin# adv: All Narrow SCSI bus AdvanSys controllers.
1145859244a6SJustin T. Gibbs# adw: Second Generation AdvanSys controllers including the ADV940UW.
11467f5092f3SJohn Baldwin# aha: Adaptec 154x/1535/1640
11477f5092f3SJohn Baldwin# ahb: Adaptec 174x EISA controllers
1148d61e6649SAlexander Langer# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1149d61e6649SAlexander Langer#      19160x/29160x, aic7770/aic78xx
1150cdd49e97SJustin T. Gibbs# ahd: Adaptec 29320/39320 Controllers.
11517f5092f3SJohn Baldwin# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1152d61e6649SAlexander Langer# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1153d61e6649SAlexander Langer#      such as the Tekram DC-390(T).
11547f5092f3SJohn Baldwin# bt:  Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
11557f5092f3SJohn Baldwin#      BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1156d61e6649SAlexander Langer# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1157d61e6649SAlexander Langer#      ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1158d61e6649SAlexander Langer#      ISP 12160 Ultra3 SCSI,
1159e8a0f829SMatt Jacob#      Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1160e8a0f829SMatt Jacob#      Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1161ac918c84SMatt Jacob# ispfw: Firmware module for Qlogic host adapters
116264fa5108SMatt Jacob# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
116364fa5108SMatt Jacob#      or FC9x9 Fibre Channel host adapters.
1164d61e6649SAlexander Langer# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1165fb91fd69SGerard Roudier# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1166fb91fd69SGerard Roudier#      53C810, 53C810A, 53C815, 53C825,  53C825A, 53C860, 53C875,
1167fb91fd69SGerard Roudier#      53C876, 53C885,  53C895, 53C895A, 53C896,  53C897, 53C1510D,
1168fb91fd69SGerard Roudier#      53C1010-33, 53C1010-66.
1169f3d92b26SOlivier Houchard# trm: Tekram DC395U/UW/F DC315U adapters.
11707f5092f3SJohn Baldwin# wds: WD7000
1171d61e6649SAlexander Langer
11727f5092f3SJohn Baldwin#
11737f5092f3SJohn Baldwin# Note that the order is important in order for Buslogic ISA/EISA cards to be
11747f5092f3SJohn Baldwin# probed correctly.
11757f5092f3SJohn Baldwin#
11767f5092f3SJohn Baldwindevice		bt
11777f5092f3SJohn Baldwinhint.bt.0.at="isa"
11787f5092f3SJohn Baldwinhint.bt.0.port="0x330"
11797f5092f3SJohn Baldwindevice		adv
11807f5092f3SJohn Baldwinhint.adv.0.at="isa"
1181c9953c3bSPeter Wemmdevice		adw
11827f5092f3SJohn Baldwindevice		aha
11837f5092f3SJohn Baldwinhint.aha.0.at="isa"
11847f5092f3SJohn Baldwindevice		aic
11857f5092f3SJohn Baldwinhint.aic.0.at="isa"
11867f5092f3SJohn Baldwindevice		ahb
1187d61e6649SAlexander Langerdevice		ahc
1188cdd49e97SJustin T. Gibbsdevice		ahd
1189d61e6649SAlexander Langerdevice		amd
1190d61e6649SAlexander Langerdevice		isp
11910787f2b8SMatt Jacobhint.isp.0.disable="1"
11920787f2b8SMatt Jacobhint.isp.0.role="3"
11930787f2b8SMatt Jacobhint.isp.0.prefer_iomap="1"
11940787f2b8SMatt Jacobhint.isp.0.prefer_memmap="1"
11950787f2b8SMatt Jacobhint.isp.0.fwload_disable="1"
11960787f2b8SMatt Jacobhint.isp.0.ignore_nvram="1"
11970787f2b8SMatt Jacobhint.isp.0.fullduplex="1"
11980787f2b8SMatt Jacobhint.isp.0.topology="lport"
11990787f2b8SMatt Jacobhint.isp.0.topology="nport"
12000787f2b8SMatt Jacobhint.isp.0.topology="lport-only"
12010787f2b8SMatt Jacobhint.isp.0.topology="nport-only"
12020787f2b8SMatt Jacob# we can't get u_int64_t types, nor can we get strings if it's got
12030787f2b8SMatt Jacob# a leading 0x, hence this silly dodge.
12040787f2b8SMatt Jacobhint.isp.0.portwnn="w50000000aaaa0000"
12050787f2b8SMatt Jacobhint.isp.0.nodewnn="w50000000aaaa0001"
1206d61e6649SAlexander Langerdevice		ispfw
120764fa5108SMatt Jacobdevice		mpt
1208d61e6649SAlexander Langerdevice		ncr
1209d61e6649SAlexander Langerdevice		sym
1210f3d92b26SOlivier Houcharddevice		trm
12117f5092f3SJohn Baldwindevice		wds
12127f5092f3SJohn Baldwinhint.wds.0.at="isa"
12137f5092f3SJohn Baldwinhint.wds.0.port="0x350"
12147f5092f3SJohn Baldwinhint.wds.0.irq="11"
12157f5092f3SJohn Baldwinhint.wds.0.drq="6"
1216d61e6649SAlexander Langer
1217d61e6649SAlexander Langer# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1218d61e6649SAlexander Langer# controllers that have it configured only if this option is set. Unfortunately,
1219d61e6649SAlexander Langer# this doesn't work on some motherboards, which prevents it from being the
1220d61e6649SAlexander Langer# default.
1221d61e6649SAlexander Langeroptions 	AHC_ALLOW_MEMIO
1222d61e6649SAlexander Langer
1223fac70739SJeroen Ruigrok van der Werven# Dump the contents of the ahc controller configuration PROM.
1224fac70739SJeroen Ruigrok van der Wervenoptions 	AHC_DUMP_EEPROM
1225fac70739SJeroen Ruigrok van der Werven
1226fac70739SJeroen Ruigrok van der Werven# Bitmap of units to enable targetmode operations.
1227fac70739SJeroen Ruigrok van der Wervenoptions 	AHC_TMODE_ENABLE
1228fac70739SJeroen Ruigrok van der Werven
1229cdd49e97SJustin T. Gibbs# Compile in aic79xx debugging code.
1230cdd49e97SJustin T. Gibbsoptions 	AHD_DEBUG
1231cdd49e97SJustin T. Gibbs
1232cdd49e97SJustin T. Gibbs# Aic79xx driver debugging options.
123343e9d8a3SScott Long# See the ahd(4) manpage
1234cdd49e97SJustin T. Gibbsoptions 	AHD_DEBUG_OPTS=0xFFFFFFFF
1235cdd49e97SJustin T. Gibbs
123643e9d8a3SScott Long# Print human-readable register definitions when debugging
123743e9d8a3SScott Longoptions 	AHD_REG_PRETTY_PRINT
123843e9d8a3SScott Long
1239d61e6649SAlexander Langer# The adw driver will attempt to use memory mapped I/O for all PCI
1240d61e6649SAlexander Langer# controllers that have it configured only if this option is set.
1241d61e6649SAlexander Langeroptions 	ADW_ALLOW_MEMIO
1242d61e6649SAlexander Langer
1243d61e6649SAlexander Langer# Options used in dev/isp/ (Qlogic SCSI/FC driver).
1244d61e6649SAlexander Langer#
1245d61e6649SAlexander Langer#	ISP_TARGET_MODE		-	enable target mode operation
1246d61e6649SAlexander Langer#
124764fa5108SMatt Jacoboptions 	ISP_TARGET_MODE=1
1248d61e6649SAlexander Langer
1249d61e6649SAlexander Langer# Options used in dev/sym/ (Symbios SCSI driver).
1250d61e6649SAlexander Langer#options 	SYM_SETUP_LP_PROBE_MAP	#-Low Priority Probe Map (bits)
1251d61e6649SAlexander Langer					# Allows the ncr to take precedence
1252d61e6649SAlexander Langer					# 1 (1<<0) -> 810a, 860
1253d61e6649SAlexander Langer					# 2 (1<<1) -> 825a, 875, 885, 895
1254d61e6649SAlexander Langer					# 4 (1<<2) -> 895a, 896, 1510d
1255d61e6649SAlexander Langer#options 	SYM_SETUP_SCSI_DIFF	#-HVD support for 825a, 875, 885
1256d61e6649SAlexander Langer					# disabled:0 (default), enabled:1
1257d61e6649SAlexander Langer#options 	SYM_SETUP_PCI_PARITY	#-PCI parity checking
1258d61e6649SAlexander Langer					# disabled:0, enabled:1 (default)
1259d61e6649SAlexander Langer#options 	SYM_SETUP_MAX_LUN	#-Number of LUNs supported
1260d61e6649SAlexander Langer					# default:8, range:[1..64]
12616a8d6623SGarrett Wollman
1262ef137fd3SMike Smith# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
1263ef137fd3SMike Smith# controllers (SmartRAID V and VI and later).
1264ef137fd3SMike Smith# These controllers require the CAM infrastructure.
1265ef137fd3SMike Smith#
1266ef137fd3SMike Smithdevice		asr
1267ef137fd3SMike Smith
1268153cbcc3SMike Smith# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1269153cbcc3SMike Smith# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1270153cbcc3SMike Smith# The DPT controllers are commonly re-licensed under other brand-names -
1271153cbcc3SMike Smith# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1272153cbcc3SMike Smith# Compaq are actually DPT controllers.
1273153cbcc3SMike Smith#
1274153cbcc3SMike Smith# See src/sys/dev/dpt for debugging and other subtle options.
1275153cbcc3SMike Smith#   DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1276153cbcc3SMike Smith#                           instruments are enabled.  The tools in
1277153cbcc3SMike Smith#                           /usr/sbin/dpt_* assume these to be enabled.
1278153cbcc3SMike Smith#   DPT_HANDLE_TIMEOUTS     Normally device timeouts are handled by the DPT.
1279153cbcc3SMike Smith#                           If you ant the driver to handle timeouts, enable
1280153cbcc3SMike Smith#                           this option.  If your system is very busy, this
1281153cbcc3SMike Smith#                           option will create more trouble than solve.
1282153cbcc3SMike Smith#   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
1283153cbcc3SMike Smith#                           wait when timing out with the above option.
1284153cbcc3SMike Smith#  DPT_DEBUG_xxxx           These are controllable from sys/dev/dpt/dpt.h
1285153cbcc3SMike Smith#  DPT_LOST_IRQ             When enabled, will try, once per second, to catch
1286153cbcc3SMike Smith#                           any interrupt that got lost.  Seems to help in some
1287153cbcc3SMike Smith#                           DPT-firmware/Motherboard combinations.  Minimal
1288153cbcc3SMike Smith#                           cost, great benefit.
1289153cbcc3SMike Smith#  DPT_RESET_HBA            Make "reset" actually reset the controller
1290153cbcc3SMike Smith#                           instead of fudging it.  Only enable this if you
1291153cbcc3SMike Smith#			    are 100% certain you need it.
1292153cbcc3SMike Smith
1293153cbcc3SMike Smithdevice		dpt
1294153cbcc3SMike Smith
1295153cbcc3SMike Smith# DPT options
1296153cbcc3SMike Smith#!CAM# options 	DPT_MEASURE_PERFORMANCE
1297153cbcc3SMike Smith#!CAM# options 	DPT_HANDLE_TIMEOUTS
1298153cbcc3SMike Smithoptions 	DPT_TIMEOUT_FACTOR=4
1299153cbcc3SMike Smithoptions 	DPT_LOST_IRQ
1300153cbcc3SMike Smithoptions 	DPT_RESET_HBA
1301153cbcc3SMike Smithoptions 	DPT_ALLOW_MEMIO
1302153cbcc3SMike Smith
1303153cbcc3SMike Smith#
13043a31b7ebSMike Smith# Compaq "CISS" RAID controllers (SmartRAID 5* series)
13053a31b7ebSMike Smith# These controllers have a SCSI-like interface, and require the
13063a31b7ebSMike Smith# CAM infrastructure.
13073a31b7ebSMike Smith#
13083a31b7ebSMike Smithdevice		ciss
13093a31b7ebSMike Smith
13103a31b7ebSMike Smith#
1311a245737cSMike Smith# Intel Integrated RAID controllers.
1312a245737cSMike Smith# This driver was developed and is maintained by Intel.  Contacts
1313a245737cSMike Smith# at Intel for this driver are
1314a245737cSMike Smith# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1315a245737cSMike Smith# "Leubner, Achim" <achim.leubner@intel.com>.
1316a245737cSMike Smith#
1317a245737cSMike Smithdevice		iir
1318a245737cSMike Smith
1319a245737cSMike Smith#
1320153cbcc3SMike Smith# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1321153cbcc3SMike Smith# firmware.  These controllers have a SCSI-like interface, and require
1322153cbcc3SMike Smith# the CAM infrastructure.
1323153cbcc3SMike Smith#
1324153cbcc3SMike Smithdevice		mly
1325153cbcc3SMike Smith
13268b89ef0aSSøren Schmidt#
13275e3488e3SJonathan Lemon# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers.  Only
13285e3488e3SJonathan Lemon# one entry is needed; the code will find and configure all supported
13295e3488e3SJonathan Lemon# controllers.
133013066c5fSJonathan Lemon#
13315e3488e3SJonathan Lemondevice		ida		# Compaq Smart RAID
1332c9953c3bSPeter Wemmdevice		mlx		# Mylex DAC960
1333c9953c3bSPeter Wemmdevice		amr		# AMI MegaRAID
13346ac4727aSMike Smith
13356ac4727aSMike Smith#
133690d3341eSPeter Wemm# 3ware ATA RAID
133790d3341eSPeter Wemm#
133890d3341eSPeter Wemmdevice		twe		# 3ware ATA RAID
133990d3341eSPeter Wemm
134090d3341eSPeter Wemm#
13416d04301dSAlexander Langer# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
13426d04301dSAlexander Langer# devices. You only need one "device ata" for it to find all
13436d04301dSAlexander Langer# PCI and PC Card ATA/ATAPI devices on modern machines.
1344c9953c3bSPeter Wemmdevice		ata
1345c9953c3bSPeter Wemmdevice		atadisk		# ATA disk drives
1346c9953c3bSPeter Wemmdevice		atapicd		# ATAPI CDROM drives
1347c9953c3bSPeter Wemmdevice		atapifd		# ATAPI floppy drives
1348c9953c3bSPeter Wemmdevice		atapist		# ATAPI tape drives
1349fd4b4eccSSøren Schmidtdevice		atapicam	# emulate ATAPI devices as SCSI ditto via CAM
1350fd4b4eccSSøren Schmidt				# needs CAM to be present (scbus & pass)
13518b89ef0aSSøren Schmidt#
13526d04301dSAlexander Langer# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
13536d04301dSAlexander Langerhint.ata.0.at="isa"
13546d04301dSAlexander Langerhint.ata.0.port="0x1f0"
13556d04301dSAlexander Langerhint.ata.0.irq="14"
13566d04301dSAlexander Langerhint.ata.1.at="isa"
13576d04301dSAlexander Langerhint.ata.1.port="0x170"
13586d04301dSAlexander Langerhint.ata.1.irq="15"
13596d04301dSAlexander Langer
13606d04301dSAlexander Langer#
1361000da71aSSøren Schmidt# The following options are valid on the ATA driver:
1362000da71aSSøren Schmidt#
1363000da71aSSøren Schmidt# ATA_STATIC_ID:	controller numbering is static ie depends on location
136474d8e840SSøren Schmidt#			else the device numbers are dynamically allocated.
136574d8e840SSøren Schmidt
136674d8e840SSøren Schmidtoptions 	ATA_STATIC_ID
136774d8e840SSøren Schmidt
13688b89ef0aSSøren Schmidt#
13696d04301dSAlexander Langer# Standard floppy disk controllers and floppy tapes, supports
13706d04301dSAlexander Langer# the Y-E DATA External FDD (PC Card)
13716a8d6623SGarrett Wollman#
1372f71c01ccSPeter Wemmdevice		fdc
1373f71c01ccSPeter Wemmhint.fdc.0.at="isa"
1374f71c01ccSPeter Wemmhint.fdc.0.port="0x3F0"
1375f71c01ccSPeter Wemmhint.fdc.0.irq="6"
1376f71c01ccSPeter Wemmhint.fdc.0.drq="2"
137785827d9cSJoerg Wunsch#
1378d2fb4892SJoerg Wunsch# FDC_DEBUG enables floppy debugging.  Since the debug output is huge, you
1379d2fb4892SJoerg Wunsch# gotta turn it actually on by setting the variable fd_debug with DDB,
1380d2fb4892SJoerg Wunsch# however.
1381d2fb4892SJoerg Wunschoptions 	FDC_DEBUG
1382d2fb4892SJoerg Wunsch#
1383f71c01ccSPeter Wemm# Activate this line if you happen to have an Insight floppy tape.
1384f71c01ccSPeter Wemm# Probing them proved to be dangerous for people with floppy disks only,
1385f71c01ccSPeter Wemm# so it's "hidden" behind a flag:
1386f71c01ccSPeter Wemm#hint.fdc.0.flags="1"
138785827d9cSJoerg Wunsch
1388f71c01ccSPeter Wemm# Specify floppy devices
1389f71c01ccSPeter Wemmhint.fd.0.at="fdc0"
1390f71c01ccSPeter Wemmhint.fd.0.drive="0"
1391f71c01ccSPeter Wemmhint.fd.1.at="fdc0"
1392f71c01ccSPeter Wemmhint.fd.1.drive="1"
139385827d9cSJoerg Wunsch
13946a8d6623SGarrett Wollman#
13956d04301dSAlexander Langer# sio: serial ports (see sio(4)), including support for various
13966d04301dSAlexander Langer#      PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf)
13976a8d6623SGarrett Wollman
1398f71c01ccSPeter Wemmdevice		sio
1399f71c01ccSPeter Wemmhint.sio.0.at="isa"
1400f71c01ccSPeter Wemmhint.sio.0.port="0x3F8"
1401f71c01ccSPeter Wemmhint.sio.0.flags="0x10"
1402f71c01ccSPeter Wemmhint.sio.0.irq="4"
14039546766aSBruce Evans
14049546766aSBruce Evans#
14059546766aSBruce Evans# `flags' for serial drivers that support consoles (only for sio now):
14069546766aSBruce Evans#	0x10	enable console support for this unit.  The other console flags
14079546766aSBruce Evans#		are ignored unless this is set.  Enabling console support does
14089546766aSBruce Evans#		not make the unit the preferred console - boot with -h or set
14099546766aSBruce Evans#		the 0x20 flag for that.  Currently, at most one unit can have
14109546766aSBruce Evans#		console support; the first one (in config file order) with
14119546766aSBruce Evans#		this flag set is preferred.  Setting this flag for sio0 gives
14129546766aSBruce Evans#		the old behaviour.
14139546766aSBruce Evans#	0x20	force this unit to be the console (unless there is another
14149546766aSBruce Evans#		higher priority console).  This replaces the COMCONSOLE option.
14159546766aSBruce Evans#	0x40	reserve this unit for low level console operations.  Do not
141604fb8e53SAlexander Langer#		access the device in any normal way.
1417a7674320SMartin Cracauer#	0x80	use this port for serial line gdb support in ddb.
14189546766aSBruce Evans#
14192ce7d7a0SPoul-Henning Kamp# PnP `flags'
14206a796ce0SJohn-Mark Gurney#	0x1	disable probing of this device.  Used to prevent your modem
14216a796ce0SJohn-Mark Gurney#		from being attached as a PnP modem.
14226a796ce0SJohn-Mark Gurney#
14239546766aSBruce Evans
14249546766aSBruce Evans# Options for serial drivers that support consoles (only for sio now):
14259546766aSBruce Evansoptions 	BREAK_TO_DEBUGGER	#a BREAK on a comconsole goes to
14269546766aSBruce Evans					#DDB, if available.
1427ba23229eSDima Dorfmanoptions 	CONSPEED=115200		# speed for serial console
1428ba23229eSDima Dorfman					# (default 9600)
14296a8d6623SGarrett Wollman
143026b6ea69SPaul Saab# Solaris implements a new BREAK which is initiated by a character
143126b6ea69SPaul Saab# sequence CR ~ ^b which is similar to a familiar pattern used on
143226b6ea69SPaul Saab# Sun servers by the Remote Console.
143326b6ea69SPaul Saaboptions 	ALT_BREAK_TO_DEBUGGER
143426b6ea69SPaul Saab
14356a8d6623SGarrett Wollman# Options for sio:
1436768fd661SBruce Evansoptions 	COM_ESP			#code for Hayes ESP
14379ba0e7c3SBruce Evansoptions 	COM_MULTIPORT		#code for some cards with shared IRQs
14386a8d6623SGarrett Wollman
143996b89afcSBruce Evans# Other flags for sio that aren't documented in the man page.
144096b89afcSBruce Evans#	0x20000	enable hardware RTS/CTS and larger FIFOs.  Only works for
144196b89afcSBruce Evans#		ST16650A-compatible UARTs.
144296b89afcSBruce Evans
14439c564b6cSJohn Hay# PCI Universal Communications driver
14449c564b6cSJohn Hay# Supports various single and multi port PCI serial cards. Maybe later
14459c564b6cSJohn Hay# also the parallel ports on combination serial/parallel cards. New cards
1446093d7296SChris D. Faulhaber# can be added in src/sys/dev/puc/pucdata.c.
14479c564b6cSJohn Hay#
14489c564b6cSJohn Hay# If the PUC_FASTINTR option is used the driver will try to use fast
14499c564b6cSJohn Hay# interrupts. The card must then be the only user of that interrupt.
14509c564b6cSJohn Hay# Interrupts cannot be shared when using PUC_FASTINTR.
14519c564b6cSJohn Haydevice		puc
14529c564b6cSJohn Hayoptions 	PUC_FASTINTR
14539c564b6cSJohn Hay
14546a8d6623SGarrett Wollman#
1455d61e6649SAlexander Langer# Network interfaces:
14566a8d6623SGarrett Wollman#
1457d61e6649SAlexander Langer# MII bus support is required for some PCI 10/100 ethernet NICs,
1458d61e6649SAlexander Langer# namely those which use MII-compliant transceivers or implement
1459d61e6649SAlexander Langer# tranceiver control interfaces that operate like an MII. Adding
1460d61e6649SAlexander Langer# "device miibus0" to the kernel config pulls in support for
1461d61e6649SAlexander Langer# the generic miibus API and all of the PHY drivers, including a
1462d61e6649SAlexander Langer# generic one for PHYs that aren't specifically handled by an
1463d61e6649SAlexander Langer# individual driver.
1464d61e6649SAlexander Langerdevice		miibus
1465d61e6649SAlexander Langer
14667f5092f3SJohn Baldwin# an:   Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
14677f5092f3SJohn Baldwin#       PCI and ISA varieties.
14687f5092f3SJohn Baldwin# awi:  Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and
14697f5092f3SJohn Baldwin#       Harris (Intersil) Chipset with PCnetMobile firmware by AMD.
147095d67482SBill Paul# bge:	Support for gigabit ethernet adapters based on the Broadcom
1471586d7c2eSJohn Polstra#	BCM570x family of controllers, including the 3Com 3c996-T,
1472586d7c2eSJohn Polstra#	the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1473586d7c2eSJohn Polstra#	the embedded gigE NICs on Dell PowerEdge 2550 servers.
14747f5092f3SJohn Baldwin# cm:	Arcnet SMC COM90c26 / SMC COM90c56
14757f5092f3SJohn Baldwin#	(and SMC COM90c66 in '56 compatibility mode) adapters.
14767f5092f3SJohn Baldwin# cnw:  Xircom CNW/Netware Airsurfer PC Card adapter
14777f5092f3SJohn Baldwin# cs:   IBM Etherjet and other Crystal Semi CS89x0-based adapters
1478d61e6649SAlexander Langer# dc:   Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1479d61e6649SAlexander Langer#       and various workalikes including:
1480d61e6649SAlexander Langer#       the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1481d61e6649SAlexander Langer#       AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1482d61e6649SAlexander Langer#       82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1483d61e6649SAlexander Langer#       and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1484d61e6649SAlexander Langer#       replaces the old al, ax, dm, pn and mx drivers.  List of brands:
1485d61e6649SAlexander Langer#       Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1486d61e6649SAlexander Langer#       SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1487d61e6649SAlexander Langer#       LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1488d61e6649SAlexander Langer#       KNE110TX.
1489d61e6649SAlexander Langer# de:   Digital Equipment DC21040
1490a59716d2SPrafulla Deuskar# em:   Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
14917f5092f3SJohn Baldwin# ep:   3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
14927f5092f3SJohn Baldwin#       and PC Card devices using these chipsets.
14937f5092f3SJohn Baldwin# ex:   Intel EtherExpress Pro/10 and other i82595-based adapters,
14947f5092f3SJohn Baldwin#       Olicom Ethernet PC Card devices.
14957f5092f3SJohn Baldwin# fe:   Fujitsu MB86960A/MB86965A Ethernet
14967f5092f3SJohn Baldwin# fea:  DEC DEFEA EISA FDDI adapter
1497d61e6649SAlexander Langer# fpa:  Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1498d61e6649SAlexander Langer# fxp:  Intel EtherExpress Pro/100B
1499cf87044eSMatt Jacob#	(hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1500e903bd58SJonathan Lemon# gx:   Intel Pro/1000 Gigabit Ethernet (82542, 82543-F, 82543-T)
1501c678bc4fSBill Paul# lge:	Support for PCI gigabit ethernet adapters based on the Level 1
1502c678bc4fSBill Paul#	LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1503c678bc4fSBill Paul#	SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1504d3d67116SMaxim Sobolev# my:	Myson Fast Ethernet (MTD80X, MTD89X)
1505ce4946daSBill Paul# nge:	Support for PCI gigabit ethernet adapters based on the National
1506ce4946daSBill Paul#	Semiconductor DP83820 and DP83821 chipset. This includes the
1507ce4946daSBill Paul#	SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
150801019292SBill Paul#	GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the LinkSys
1509660e0297SBill Paul#	EG1032 and EG1064, the Surecom EP-320G-TX and the Netgear GA622T.
151041f7d2d5SBill Paul# pcn:	Support for PCI fast ethernet adapters based on the AMD Am79c97x
151141f7d2d5SBill Paul#	chipsets, including the PCnet/FAST, PCnet/FAST+, PCnet/PRO and
151241f7d2d5SBill Paul#	PCnet/Home. These were previously handled by the lnc driver (and
151341f7d2d5SBill Paul#	still will be if you leave this driver out of the kernel).
1514d61e6649SAlexander Langer# rl:   Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1515d61e6649SAlexander Langer#       chipset.  Note that the RealTek driver defaults to using programmed
1516d61e6649SAlexander Langer#       I/O to do register accesses because memory mapped mode seems to cause
1517d61e6649SAlexander Langer#       severe lockups on SMP hardware.  This driver also supports the
1518d61e6649SAlexander Langer#       Accton EN1207D `Cheetah' adapter, which uses a chip called
1519d61e6649SAlexander Langer#       the MPX 5030/5038, which is either a RealTek in disguise or a
1520d61e6649SAlexander Langer#       RealTek workalike.  Note that the D-Link DFE-530TX+ uses the RealTek
1521d61e6649SAlexander Langer#       chipset and is supported by this driver, not the 'vr' driver.
1522d61e6649SAlexander Langer# sf:   Support for Adaptec Duralink PCI fast ethernet adapters based on the
1523d61e6649SAlexander Langer#       Adaptec AIC-6915 "starfire" controller.
1524d61e6649SAlexander Langer#       This includes dual and quad port cards, as well as one 100baseFX card.
1525d61e6649SAlexander Langer#       Most of these are 64-bit PCI devices, except for one single port
1526d61e6649SAlexander Langer#       card which is 32-bit.
1527b2ca5572SAlexander Langer# sis:  Support for NICs based on the Silicon Integrated Systems SiS 900,
1528b2ca5572SAlexander Langer#       SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1529d61e6649SAlexander Langer# sk:   Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1530d61e6649SAlexander Langer#       This includes the SK-9841 and SK-9842 single port cards (single mode
1531d61e6649SAlexander Langer#       and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1532d61e6649SAlexander Langer#       (also single mode and multimode).
1533d61e6649SAlexander Langer#       The driver will autodetect the number of ports on the card and
1534d61e6649SAlexander Langer#       attach each one as a separate network interface.
15357f5092f3SJohn Baldwin# sn:   Support for ISA and PC Card Ethernet devices using the
15367f5092f3SJohn Baldwin#       SMC91C90/92/94/95 chips.
15377f5092f3SJohn Baldwin# sr:   RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
1538d61e6649SAlexander Langer# ste:  Sundance Technologies ST201 PCI fast ethernet controller, includes
1539d61e6649SAlexander Langer#       the D-Link DFE-550TX.
1540d61e6649SAlexander Langer# ti:   Support for PCI gigabit ethernet NICs based on the Alteon Networks
1541d61e6649SAlexander Langer#       Tigon 1 and Tigon 2 chipsets.  This includes the Alteon AceNIC, the
1542d61e6649SAlexander Langer#       3Com 3c985, the Netgear GA620 and various others.  Note that you will
1543d61e6649SAlexander Langer#       probably want to bump up NMBCLUSTERS a lot to use this driver.
1544d61e6649SAlexander Langer# tl:   Support for the Texas Instruments TNETE100 series 'ThunderLAN'
1545d61e6649SAlexander Langer#       cards and integrated ethernet controllers.  This includes several
1546d61e6649SAlexander Langer#       Compaq Netelligent 10/100 cards and the built-in ethernet controllers
1547d61e6649SAlexander Langer#       in several Compaq Prosignia, Proliant and Deskpro systems.  It also
1548d61e6649SAlexander Langer#       supports several Olicom 10Mbps and 10/100 boards.
15490cc2be21SSemen Ustimenko# tx:   SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II serie)
1550362c5c1eSBill Paul# txp:	Support for 3Com 3cR990 cards with the "Typhoon" chipset
1551d61e6649SAlexander Langer# vr:   Support for various fast ethernet adapters based on the VIA
1552d61e6649SAlexander Langer#       Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
1553d61e6649SAlexander Langer#       including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1554d61e6649SAlexander Langer#       Technologies PN102TX, and the AOpen/Acer ALN-320.
1555d61e6649SAlexander Langer# vx:   3Com 3C590 and 3C595
1556d61e6649SAlexander Langer# wb:   Support for fast ethernet adapters based on the Winbond W89C840F chip.
1557d61e6649SAlexander Langer#       Note: this is not the same as the Winbond W89C940F, which is a
1558d61e6649SAlexander Langer#       NE2000 clone.
15597f5092f3SJohn Baldwin# wi:   Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
15607f5092f3SJohn Baldwin#       the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
15617f5092f3SJohn Baldwin#       bridge with a PCMCIA adapter plugged into it.
15627f5092f3SJohn Baldwin# xe:   Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
15637f5092f3SJohn Baldwin#       Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
15647f5092f3SJohn Baldwin#       Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
1565d61e6649SAlexander Langer# xl:   Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
1566d61e6649SAlexander Langer#       Etherlink XL cards and integrated controllers.  This includes the
1567d61e6649SAlexander Langer#       integrated 3c905B-TX chips in certain Dell Optiplex and Dell
1568d61e6649SAlexander Langer#       Precision desktop machines and the integrated 3c905-TX chips
1569d61e6649SAlexander Langer#       in Dell Latitude laptop docking stations.
1570d61e6649SAlexander Langer#       Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
1571d61e6649SAlexander Langer
15727f5092f3SJohn Baldwin# Order for ISA/EISA devices is important here
15737f5092f3SJohn Baldwin
15747f5092f3SJohn Baldwindevice		cm
15757f5092f3SJohn Baldwinhint.cm.0.at="isa"
15767f5092f3SJohn Baldwinhint.cm.0.port="0x2e0"
15777f5092f3SJohn Baldwinhint.cm.0.irq="9"
15787f5092f3SJohn Baldwinhint.cm.0.maddr="0xdc000"
15797f5092f3SJohn Baldwindevice		cs
15807f5092f3SJohn Baldwinhint.cs.0.at="isa"
15817f5092f3SJohn Baldwinhint.cs.0.port="0x300"
15827f5092f3SJohn Baldwindevice		ep
15837f5092f3SJohn Baldwindevice		ex
1584c06a3350SPeter Wemmdevice		fe
15857f5092f3SJohn Baldwinhint.fe.0.at="isa"
15867f5092f3SJohn Baldwinhint.fe.0.port="0x300"
15877f5092f3SJohn Baldwindevice		fea
1588c06a3350SPeter Wemmdevice		sr
15897f5092f3SJohn Baldwinhint.sr.0.at="isa"
15907f5092f3SJohn Baldwinhint.sr.0.port="0x300"
15917f5092f3SJohn Baldwinhint.sr.0.irq="5"
15927f5092f3SJohn Baldwinhint.sr.0.maddr="0xd0000"
15937f5092f3SJohn Baldwindevice		sn
15947f5092f3SJohn Baldwinhint.sn.0.at="isa"
15957f5092f3SJohn Baldwinhint.sn.0.port="0x300"
15967f5092f3SJohn Baldwinhint.sn.0.irq="10"
15977f5092f3SJohn Baldwindevice		an
15987f5092f3SJohn Baldwindevice		awi
15997f5092f3SJohn Baldwindevice		cnw
16007f5092f3SJohn Baldwindevice		wi
16017f5092f3SJohn Baldwindevice		xe
16027f5092f3SJohn Baldwin
1603d61e6649SAlexander Langer# PCI Ethernet NICs that use the common MII bus controller code.
1604d61e6649SAlexander Langerdevice		dc		# DEC/Intel 21143 and various workalikes
16054664a8d5SJonathan Lemondevice		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
16064664a8d5SJonathan Lemonhint.fxp.0.prefer_iomap="0"
1607d3d67116SMaxim Sobolevdevice		my		# Myson Fast Ethernet (MTD80X, MTD89X)
1608d61e6649SAlexander Langerdevice		rl		# RealTek 8129/8139
16092e1b1231SDima Dorfmandevice		pcn		# AMD Am79C97x PCI 10/100 NICs
1610d61e6649SAlexander Langerdevice		sf		# Adaptec AIC-6915 (``Starfire'')
1611d61e6649SAlexander Langerdevice		sis		# Silicon Integrated Systems SiS 900/SiS 7016
1612d61e6649SAlexander Langerdevice		ste		# Sundance ST201 (D-Link DFE-550TX)
1613d61e6649SAlexander Langerdevice		tl		# Texas Instruments ThunderLAN
1614eed59f52SSemen Ustimenkodevice		tx		# SMC EtherPower II (83c170 ``EPIC'')
1615d61e6649SAlexander Langerdevice		vr		# VIA Rhine, Rhine II
1616d61e6649SAlexander Langerdevice		wb		# Winbond W89C840F
1617d61e6649SAlexander Langerdevice		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
1618d61e6649SAlexander Langer
1619d61e6649SAlexander Langer# PCI Ethernet NICs.
1620d61e6649SAlexander Langerdevice		de		# DEC/Intel DC21x4x (``Tulip'')
162195d67482SBill Pauldevice		txp		# 3Com 3cR990 (``Typhoon'')
1622c7ba4194SWarner Loshdevice		vx		# 3Com 3c590, 3c595 (``Vortex'')
1623d61e6649SAlexander Langer
1624d61e6649SAlexander Langer# PCI Gigabit & FDDI NICs.
162595d67482SBill Pauldevice		bge
1626e903bd58SJonathan Lemondevice		gx
1627c678bc4fSBill Pauldevice		lge
1628ce4946daSBill Pauldevice		nge
1629d61e6649SAlexander Langerdevice		sk
1630d61e6649SAlexander Langerdevice		ti
1631c06a3350SPeter Wemmdevice		fpa
1632d61e6649SAlexander Langer
163398cb733cSKenneth D. Merry# Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
163498cb733cSKenneth D. Merry# This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
163598cb733cSKenneth D. Merry#options 	TI_PRIVATE_JUMBOS
163698cb733cSKenneth D. Merry# Turn on the header splitting option for the ti(4) driver firmware.  This
163798cb733cSKenneth D. Merry# only works for Tigon II chips, and has no effect for Tigon I chips.
163898cb733cSKenneth D. Merryoptions 	TI_JUMBO_HDRSPLIT
163998cb733cSKenneth D. Merry
16402c8f5a28SKenneth D. Merry# These two options allow manipulating the mbuf cluster size and mbuf size,
16412c8f5a28SKenneth D. Merry# respectively.  Be very careful with NIC driver modules when changing
16422c8f5a28SKenneth D. Merry# these from their default values, because that can potentially cause a
16432c8f5a28SKenneth D. Merry# mismatch between the mbuf size assumed by the kernel and the mbuf size
16442c8f5a28SKenneth D. Merry# assumed by a module.  The only driver that currently has the ability to
16452c8f5a28SKenneth D. Merry# detect a mismatch is ti(4).
16462c8f5a28SKenneth D. Merryoptions 	MCLSHIFT=12	# mbuf cluster shift in bits, 12 == 4KB
16472c8f5a28SKenneth D. Merryoptions 	MSIZE=512	# mbuf size in bytes
16482c8f5a28SKenneth D. Merry
164968713f97SKenjiro Cho#
165044b5247dSKenjiro Cho# ATM related options (Cranor version)
165144b5247dSKenjiro Cho# (note: this driver cannot be used with the HARP ATM stack)
165268713f97SKenjiro Cho#
165368713f97SKenjiro Cho# The `en' device provides support for Efficient Networks (ENI)
165468713f97SKenjiro Cho# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
165568713f97SKenjiro Cho#
1656f71c01ccSPeter Wemm# atm device provides generic atm functions and is required for
165768713f97SKenjiro Cho# atm devices.
16583cbceb82SKenjiro Cho# NATM enables the netnatm protocol family that can be used to
165968713f97SKenjiro Cho# bypass TCP/IP.
166068713f97SKenjiro Cho#
166168713f97SKenjiro Cho# the current driver supports only PVC operations (no atm-arp, no multicast).
166268713f97SKenjiro Cho# for more details, please read the original documents at
166398a44096SSheldon Hearn# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
166468713f97SKenjiro Cho#
1665f71c01ccSPeter Wemmdevice		atm
166644b5247dSKenjiro Chodevice		en
16673cbceb82SKenjiro Chooptions 	NATM			#native ATM
1668f4567b9cSJulian Elischer
1669c19da41eSPeter Wemm#
16707f5092f3SJohn Baldwin# Audio drivers: `pcm', `sbc', `gusc'
1671c19da41eSPeter Wemm#
1672c7406082SJohn-Mark Gurney# pcm: PCM audio through various sound cards.
1673c7406082SJohn-Mark Gurney#
167468ec4eb6SLuigi Rizzo# This has support for a large number of new audio cards, based on
167568ec4eb6SLuigi Rizzo# CS423x, OPTi931, Yamaha OPL-SAx, and also for SB16, GusPnP.
167668ec4eb6SLuigi Rizzo# For more information about this driver and supported cards,
167798a44096SSheldon Hearn# see the pcm.4 man page.
1678c7406082SJohn-Mark Gurney#
16797f5092f3SJohn Baldwin# The flags of the device tells the device a bit more info about the
16807f5092f3SJohn Baldwin# device that normally is obtained through the PnP interface.
16817f5092f3SJohn Baldwin#	bit  2..0   secondary DMA channel;
16827f5092f3SJohn Baldwin#	bit  4      set if the board uses two dma channels;
16837f5092f3SJohn Baldwin#	bit 15..8   board type, overrides autodetection; leave it
16847f5092f3SJohn Baldwin#		    zero if don't know what to put in (and you don't,
16857f5092f3SJohn Baldwin#		    since this is unsupported at the moment...).
16867f5092f3SJohn Baldwin#
168781bb901eSPeter Wemm# Supported cards include:
16887f5092f3SJohn Baldwin# Creative SoundBlaster ISA PnP/non-PnP
16897f5092f3SJohn Baldwin# Supports ESS and Avance ISA chips as well.
16907f5092f3SJohn Baldwin# Gravis UltraSound ISA PnP/non-PnP
169181bb901eSPeter Wemm# Crystal Semiconductor CS461x/428x PCI
169281bb901eSPeter Wemm# Neomagic 256AV (ac97)
16937f5092f3SJohn Baldwin# Most of the more common ISA/PnP sb/mss/ess compatable cards.
169481bb901eSPeter Wemm
169567245194SPeter Wemmdevice		pcm
1696c19da41eSPeter Wemm
16977f5092f3SJohn Baldwin# For non-pnp sound cards with no bridge drivers only:
16987f5092f3SJohn Baldwinhint.pcm.0.at="isa"
16997f5092f3SJohn Baldwinhint.pcm.0.irq="10"
17007f5092f3SJohn Baldwinhint.pcm.0.drq="1"
17017f5092f3SJohn Baldwinhint.pcm.0.flags="0x0"
17027f5092f3SJohn Baldwin
1703fb0ef528SSeigo Tanimura#
1704fb0ef528SSeigo Tanimura# midi: MIDI interfaces and synthesizers
1705fb0ef528SSeigo Tanimura#
1706fb0ef528SSeigo Tanimura
1707fb0ef528SSeigo Tanimuradevice		midi
1708fb0ef528SSeigo Tanimura
17097f5092f3SJohn Baldwin# For non-pnp sound cards with no bridge drivers:
17107f5092f3SJohn Baldwinhint.midi.0.at="isa"
17117f5092f3SJohn Baldwinhint.midi.0.irq="5"
17127f5092f3SJohn Baldwinhint.midi.0.flags="0x0"
17137f5092f3SJohn Baldwin
17147f5092f3SJohn Baldwin# For serial ports (this example configures port 2):
17157f5092f3SJohn Baldwin# TODO: implement generic tty-midi interface so that we can use
17167f5092f3SJohn Baldwin#	other uarts.
17177f5092f3SJohn Baldwinhint.midi.0.at="isa"
17187f5092f3SJohn Baldwinhint.midi.0.port="0x2F8"
17197f5092f3SJohn Baldwinhint.midi.0.irq="3"
17207f5092f3SJohn Baldwin
1721fb0ef528SSeigo Tanimura#
1722fb0ef528SSeigo Tanimura# seq: MIDI sequencer
1723fb0ef528SSeigo Tanimura#
1724fb0ef528SSeigo Tanimura
1725fb0ef528SSeigo Tanimuradevice		seq
1726fb0ef528SSeigo Tanimura
17277f5092f3SJohn Baldwin# The bridge drivers for sound cards.  These can be separately configured
17287f5092f3SJohn Baldwin# for providing services to the likes of new-midi.
17297f5092f3SJohn Baldwin# When used with 'device pcm' they also provide pcm sound services.
17307f5092f3SJohn Baldwin#
17317f5092f3SJohn Baldwin# sbc:  Creative SoundBlaster ISA PnP/non-PnP
17327f5092f3SJohn Baldwin#	Supports ESS and Avance ISA chips as well.
17337f5092f3SJohn Baldwin# gusc: Gravis UltraSound ISA PnP/non-PnP
17347f5092f3SJohn Baldwin# csa:  Crystal Semiconductor CS461x/428x PCI
17357f5092f3SJohn Baldwin
17367f5092f3SJohn Baldwin# For non-PnP cards:
17377f5092f3SJohn Baldwindevice		sbc
17387f5092f3SJohn Baldwinhint.sbc.0.at="isa"
17397f5092f3SJohn Baldwinhint.sbc.0.port="0x220"
17407f5092f3SJohn Baldwinhint.sbc.0.irq="5"
17417f5092f3SJohn Baldwinhint.sbc.0.drq="1"
17427f5092f3SJohn Baldwinhint.sbc.0.flags="0x15"
17437f5092f3SJohn Baldwindevice		gusc
17447f5092f3SJohn Baldwinhint.gusc.0.at="isa"
17457f5092f3SJohn Baldwinhint.gusc.0.port="0x220"
17467f5092f3SJohn Baldwinhint.gusc.0.irq="5"
17477f5092f3SJohn Baldwinhint.gusc.0.drq="1"
17487f5092f3SJohn Baldwinhint.gusc.0.flags="0x13"
17497f5092f3SJohn Baldwin
17506a8d6623SGarrett Wollman#
1751567e21c2SBruce Evans# Miscellaneous hardware:
17526a8d6623SGarrett Wollman#
17536fe8789dSMatthew N. Dodd# scd: Sony CD-ROM using proprietary (non-ATAPI) interface
17543ae5b532SMatthew N. Dodd# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
17551d86961eSJordan K. Hubbard# meteor: Matrox Meteor video capture board
17561c2b5939SRoger Hardiman# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
17572849b131SBruce Evans# cy: Cyclades serial driver
17587f5092f3SJohn Baldwin# joy: joystick (including IO DATA PCJOY PC Card joystick)
1759dd267672SJohn Baldwin# rp: Comtrol Rocketport(ISA/PCI) - single card
17607f5092f3SJohn Baldwin# si: Specialix SI/XIO 4-32 port terminal multiplexor
1761ec84f103SMark Peek# nmdm: nullmodem terminal driver (see nmdm(4))
1762657e73c4SPeter Dufault
17633b577e1fSJordan K. Hubbard# Notes on the Comtrol Rocketport driver:
17643b577e1fSJordan K. Hubbard#
17653b577e1fSJordan K. Hubbard# The exact values used for rp0 depend on how many boards you have
17663b577e1fSJordan K. Hubbard# in the system.  The manufacturer's sample configs are listed as:
17673b577e1fSJordan K. Hubbard#
1768f71c01ccSPeter Wemm#               device  rp	# core driver support
1769f71c01ccSPeter Wemm#
17703b577e1fSJordan K. Hubbard#   Comtrol Rocketport ISA single card
1771b147fcf9SBruce Evans#		hint.rp.0.at="isa"
1772b147fcf9SBruce Evans#		hint.rp.0.port="0x280"
17733b577e1fSJordan K. Hubbard#
17743b577e1fSJordan K. Hubbard#   If instead you have two ISA cards, one installed at 0x100 and the
17753b577e1fSJordan K. Hubbard#   second installed at 0x180, then you should add the following to
1776f71c01ccSPeter Wemm#   your kernel probe hints:
1777b147fcf9SBruce Evans#		hint.rp.0.at="isa"
1778b147fcf9SBruce Evans#		hint.rp.0.port="0x100"
1779b147fcf9SBruce Evans#		hint.rp.1.at="isa"
1780b147fcf9SBruce Evans#		hint.rp.1.port="0x180"
17813b577e1fSJordan K. Hubbard#
17823b577e1fSJordan K. Hubbard#   For 4 ISA cards, it might be something like this:
1783b147fcf9SBruce Evans#		hint.rp.0.at="isa"
1784b147fcf9SBruce Evans#		hint.rp.0.port="0x180"
1785b147fcf9SBruce Evans#		hint.rp.1.at="isa"
1786b147fcf9SBruce Evans#		hint.rp.1.port="0x100"
1787b147fcf9SBruce Evans#		hint.rp.2.at="isa"
1788b147fcf9SBruce Evans#		hint.rp.2.port="0x340"
1789b147fcf9SBruce Evans#		hint.rp.3.at="isa"
1790b147fcf9SBruce Evans#		hint.rp.3.port="0x240"
17913b577e1fSJordan K. Hubbard#
1792dd267672SJohn Baldwin#   For PCI cards, you need no hints.
17933b577e1fSJordan K. Hubbard
17943ae5b532SMatthew N. Dodd# Mitsumi CD-ROM
17953ae5b532SMatthew N. Dodddevice		mcd
17963ae5b532SMatthew N. Doddhint.mcd.0.at="isa"
17973ae5b532SMatthew N. Doddhint.mcd.0.port="0x300"
17986fe8789dSMatthew N. Dodd# for the Sony CDU31/33A CDROM
17996fe8789dSMatthew N. Dodddevice		scd
18006fe8789dSMatthew N. Doddhint.scd.0.at="isa"
18016fe8789dSMatthew N. Doddhint.scd.0.port="0x230"
18027f5092f3SJohn Baldwindevice		joy			# PnP aware, hints for nonpnp only
18037f5092f3SJohn Baldwinhint.joy.0.at="isa"
18047f5092f3SJohn Baldwinhint.joy.0.port="0x201"
1805f71c01ccSPeter Wemmdevice		rp
18067f5092f3SJohn Baldwinhint.rp.0.at="isa"
18077f5092f3SJohn Baldwinhint.rp.0.port="0x280"
18087f5092f3SJohn Baldwindevice		si
18097f5092f3SJohn Baldwinoptions 	SI_DEBUG
18107f5092f3SJohn Baldwinhint.si.0.at="isa"
18117f5092f3SJohn Baldwinhint.si.0.maddr="0xd0000"
18127f5092f3SJohn Baldwinhint.si.0.irq="12"
1813ec84f103SMark Peekdevice		nmdm
18147f5092f3SJohn Baldwin# HOT1 Xilinx 6200 card (http://www.vcc.com/)
18157f5092f3SJohn Baldwindevice		xrpu
1816a800f455SJulian Elischer
1817eeb706c0SJustin T. Gibbs#
1818bba9a7a0SGarrett Wollman# The `meteor' device is a PCI video capture board. It can also have the
18191d86961eSJordan K. Hubbard# following options:
1820b1529bdaSPeter Wemm#   options METEOR_ALLOC_PAGES=xxx	preallocate kernel pages for data entry
18211d86961eSJordan K. Hubbard#	figure (ROWS*COLUMN*BYTES_PER_PIXEL*FRAME+PAGE_SIZE-1)/PAGE_SIZE
18221d86961eSJordan K. Hubbard#   options METEOR_DEALLOC_PAGES	remove all allocated pages on close(2)
1823b1529bdaSPeter Wemm#   options METEOR_DEALLOC_ABOVE=xxx	remove all allocated pages above the
18241d86961eSJordan K. Hubbard#	specified amount. If this value is below the allocated amount no action
18251d86961eSJordan K. Hubbard#	taken
18264f5f3f07SBrian Somers#   options METEOR_SYSTEM_DEFAULT={METEOR_PAL|METEOR_NTSC|METEOR_SECAM}, used
1827734d08a2SJordan K. Hubbard#	for initialization of fps routine when a signal is not present.
18281d86961eSJordan K. Hubbard#
1829a9c5b8d0SSøren Schmidt# The 'bktr' device is a PCI video capture device using the Brooktree
18301c2b5939SRoger Hardiman# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
1831a9c5b8d0SSøren Schmidt# TV card, eg Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
18321c2b5939SRoger Hardiman# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
18331c2b5939SRoger Hardiman#
1834a9c5b8d0SSøren Schmidt# options 	OVERRIDE_CARD=xxx
1835a9c5b8d0SSøren Schmidt# options 	OVERRIDE_TUNER=xxx
1836a9c5b8d0SSøren Schmidt# options 	OVERRIDE_MSP=1
1837a9c5b8d0SSøren Schmidt# options 	OVERRIDE_DBX=1
18381c2b5939SRoger Hardiman# These options can be used to override the auto detection
183998a44096SSheldon Hearn# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
18401c2b5939SRoger Hardiman# Using sysctl(8) run-time overrides on a per-card basis can be made
18419ff07e32SAmancio Hasty#
18424f5f3f07SBrian Somers# options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
18431c2b5939SRoger Hardiman# or
18441c2b5939SRoger Hardiman# options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
18451c2b5939SRoger Hardiman# Specifes the default video capture mode.
1846a9c5b8d0SSøren Schmidt# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
1847a9c5b8d0SSøren Schmidt# to prevent hangs during initialisation.  eg VideoLogic Captivator PCI.
1848a9c5b8d0SSøren Schmidt#
18494f5f3f07SBrian Somers# options 	BKTR_USE_PLL
18501c2b5939SRoger Hardiman# PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal)
18511c2b5939SRoger Hardiman# must enable PLL mode with this option. eg some new Bt878 cards.
1852a9c5b8d0SSøren Schmidt#
18531c2b5939SRoger Hardiman# options 	BKTR_GPIO_ACCESS
18541c2b5939SRoger Hardiman# This enable IOCTLs which give user level access to the GPIO port.
18551c2b5939SRoger Hardiman#
18561c2b5939SRoger Hardiman# options 	BKTR_NO_MSP_RESET
18571c2b5939SRoger Hardiman# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
18581c2b5939SRoger Hardiman#
18591c2b5939SRoger Hardiman# options 	BKTR_430_FX_MODE
18601c2b5939SRoger Hardiman# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
18611c2b5939SRoger Hardiman#
18621c2b5939SRoger Hardiman# options 	BKTR_SIS_VIA_MODE
18631c2b5939SRoger Hardiman# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
18641c2b5939SRoger Hardiman# needed for some old SiS and VIA chipset motherboards.
18651c2b5939SRoger Hardiman# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
18661c2b5939SRoger Hardiman# motherboards and motherboards with bad or incomplete PCI 2.1 support.
18671c2b5939SRoger Hardiman# As a rough guess, old = before 1998
18681c2b5939SRoger Hardiman#
1869017b0edcSMatt Jacob
1870f71c01ccSPeter Wemmdevice		meteor	1
18710f3563b6SRoger Hardiman
1872c17d4340SNicolas Souchu#
1873c17d4340SNicolas Souchu# options	BKTR_USE_FREEBSD_SMBUS
1874c17d4340SNicolas Souchu# Compile with FreeBSD SMBus implementation
1875c17d4340SNicolas Souchu#
187628ebb692SNicolas Souchu# Brooktree driver has been ported to the new I2C framework. Thus,
18770f3563b6SRoger Hardiman# you'll need to have the following 3 lines in the kernel config.
187837973e86SPeter Wemm#     device smbus
187937973e86SPeter Wemm#     device iicbus
188037973e86SPeter Wemm#     device iicbb
1881c17d4340SNicolas Souchu#     device iicsmb
18820f3563b6SRoger Hardiman# The iic and smb devices are only needed if you want to control other
18830f3563b6SRoger Hardiman# I2C slaves connected to the external connector of some cards.
188428ebb692SNicolas Souchu#
1885c06a3350SPeter Wemmdevice		bktr
1886446cee6eSJoerg Wunsch
1887dc9deb29SPoul-Henning Kamp#
18887f5092f3SJohn Baldwin# PC Card/PCMCIA
18897f5092f3SJohn Baldwin# (OLDCARD)
18907f5092f3SJohn Baldwin#
18917f5092f3SJohn Baldwin# card: pccard slots
18927f5092f3SJohn Baldwin# pcic: isa/pccard bridge
1893679aabeeSWarner Losh#device		pcic
1894679aabeeSWarner Losh#hint.pcic.0.at="isa"
1895679aabeeSWarner Losh#hint.pcic.1.at="isa"
1896679aabeeSWarner Losh#device		card	1
18977f5092f3SJohn Baldwin
18987f5092f3SJohn Baldwin#
18997f5092f3SJohn Baldwin# PC Card/PCMCIA and Cardbus
19007f5092f3SJohn Baldwin# (NEWCARD)
19017f5092f3SJohn Baldwin#
19027f5092f3SJohn Baldwin# Note that NEWCARD and OLDCARD are incompatible.  Do not use both at the same
19037f5092f3SJohn Baldwin# time.
19047f5092f3SJohn Baldwin#
1905679aabeeSWarner Losh# pccbb: pci/cardbus bridge implementing YENTA interface
19067f5092f3SJohn Baldwin# pccard: pccard slots
19077f5092f3SJohn Baldwin# cardbus: cardbus slots
1908679aabeeSWarner Loshdevice		cbb
1909679aabeeSWarner Loshdevice		pccard
1910679aabeeSWarner Loshdevice		cardbus
1911679aabeeSWarner Losh#device		pcic		ISA attachment currently busted
1912679aabeeSWarner Losh#hint.pcic.0.at="isa"
1913679aabeeSWarner Losh#hint.pcic.1.at="isa"
19147f5092f3SJohn Baldwin
19157f5092f3SJohn Baldwin#
19168afa373cSNicolas Souchu# SMB bus
19178afa373cSNicolas Souchu#
19183c5656bfSArchie Cobbs# System Management Bus support is provided by the 'smbus' device.
19193c5656bfSArchie Cobbs# Access to the SMBus device is via the 'smb' device (/dev/smb*),
19203c5656bfSArchie Cobbs# which is a child of the 'smbus' device.
19218afa373cSNicolas Souchu#
19228afa373cSNicolas Souchu# Supported devices:
19233c5656bfSArchie Cobbs# smb		standard io through /dev/smb*
19248afa373cSNicolas Souchu#
19253c5656bfSArchie Cobbs# Supported SMB interfaces:
192628ebb692SNicolas Souchu# iicsmb	I2C to SMB bridge with any iicbus interface
192728ebb692SNicolas Souchu# bktr		brooktree848 I2C hardware interface
19287f5092f3SJohn Baldwin# intpm		Intel PIIX4 (82371AB, 82443MX) Power Management Unit
19297f5092f3SJohn Baldwin# alpm		Acer Aladdin-IV/V/Pro2 Power Management Unit
19307f5092f3SJohn Baldwin# ichsmb	Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
19317f5092f3SJohn Baldwin# viapm		VIA VT82C586B/596B/686A and VT8233 Power Management Unit
1932b1acc4a2SMurray Stokely# amdpm		AMD 756 Power Management Unit
193344e6ce01SNicolas Souchu# nfpm		NVIDIA nForce Power Management Unit
19348afa373cSNicolas Souchu#
1935c9953c3bSPeter Wemmdevice		smbus		# Bus support, required for smb below.
19363c5656bfSArchie Cobbs
19377f5092f3SJohn Baldwindevice		intpm
19387f5092f3SJohn Baldwindevice		alpm
19397f5092f3SJohn Baldwindevice		ichsmb
19407f5092f3SJohn Baldwindevice		viapm
194144e6ce01SNicolas Souchudevice		amdpm
194244e6ce01SNicolas Souchudevice		nfpm
19437f5092f3SJohn Baldwin
1944c9953c3bSPeter Wemmdevice		smb
19458afa373cSNicolas Souchu
19468afa373cSNicolas Souchu#
19478afa373cSNicolas Souchu# I2C Bus
19488afa373cSNicolas Souchu#
19498afa373cSNicolas Souchu# Philips i2c bus support is provided by the `iicbus' device.
19508afa373cSNicolas Souchu#
19518afa373cSNicolas Souchu# Supported devices:
19528afa373cSNicolas Souchu# ic	i2c network interface
19538afa373cSNicolas Souchu# iic	i2c standard io
1954f7d09fbaSNicolas Souchu# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
19558afa373cSNicolas Souchu#
19568afa373cSNicolas Souchu# Supported interfaces:
195728ebb692SNicolas Souchu# bktr	brooktree848 I2C software interface
195828ebb692SNicolas Souchu#
195928ebb692SNicolas Souchu# Other:
196028ebb692SNicolas Souchu# iicbb	generic I2C bit-banging code (needed by lpbb, bktr)
19618afa373cSNicolas Souchu#
1962c9953c3bSPeter Wemmdevice		iicbus		# Bus support, required for ic/iic/iicsmb below.
1963c9953c3bSPeter Wemmdevice		iicbb
19648afa373cSNicolas Souchu
1965c9953c3bSPeter Wemmdevice		ic
1966c9953c3bSPeter Wemmdevice		iic
1967c9953c3bSPeter Wemmdevice		iicsmb		# smb over i2c bridge
19688afa373cSNicolas Souchu
1969ab4c624bSMike Smith# Parallel-Port Bus
1970ab4c624bSMike Smith#
1971ab4c624bSMike Smith# Parallel port bus support is provided by the `ppbus' device.
1972ab4c624bSMike Smith# Multiple devices may be attached to the parallel port, devices
1973ab4c624bSMike Smith# are automatically probed and attached when found.
1974ab4c624bSMike Smith#
1975ab4c624bSMike Smith# Supported devices:
1976ab4c624bSMike Smith# vpo	Iomega Zip Drive
1977f7d09fbaSNicolas Souchu#	Requires SCSI disk support ('scbus' and 'da'), best
1978f88c1346SMike Smith#	performance is achieved with ports in EPP 1.9 mode.
1979fdf94d1aSNicolas Souchu# lpt	Parallel Printer
198046f3ff79SMike Smith# plip	Parallel network interface
1981fdf94d1aSNicolas Souchu# ppi	General-purpose I/O ("Geek Port") + IEEE1284 I/O
1982f7d09fbaSNicolas Souchu# pps	Pulse per second Timing Interface
198328ebb692SNicolas Souchu# lpbb	Philips official parallel port I2C bit-banging interface
1984ab4c624bSMike Smith#
1985ab4c624bSMike Smith# Supported interfaces:
1986ab4c624bSMike Smith# ppc	ISA-bus parallel port interfaces.
1987ab4c624bSMike Smith#
1988ef8f7626SNicolas Souchu
19890f210c92SNicolas Souchuoptions 	PPC_PROBE_CHIPSET # Enable chipset specific detection
19900f210c92SNicolas Souchu				  # (see flags in ppc(4))
19915895e3c8SPeter Wemmoptions 	DEBUG_1284	# IEEE1284 signaling protocol debug
19925895e3c8SPeter Wemmoptions 	PERIPH_1284	# Makes your computer act as a IEEE1284
1993ef8f7626SNicolas Souchu				# compliant peripheral
19945895e3c8SPeter Wemmoptions 	DONTPROBE_1284	# Avoid boot detection of PnP parallel devices
19955895e3c8SPeter Wemmoptions 	VP0_DEBUG	# ZIP/ZIP+ debug
19965895e3c8SPeter Wemmoptions 	LPT_DEBUG	# Printer driver debug
19975895e3c8SPeter Wemmoptions 	PPC_DEBUG	# Parallel chipset level debug
19985895e3c8SPeter Wemmoptions 	PLIP_DEBUG	# Parallel network IP interface debug
19993b2d592cSJordan K. Hubbardoptions 	PCFCLOCK_VERBOSE         # Verbose pcfclock driver
20003b2d592cSJordan K. Hubbardoptions 	PCFCLOCK_MAX_RETRIES=5   # Maximum read tries (default 10)
2001ef8f7626SNicolas Souchu
2002f71c01ccSPeter Wemmdevice		ppc
2003f71c01ccSPeter Wemmhint.ppc.0.at="isa"
2004f71c01ccSPeter Wemmhint.ppc.0.irq="7"
20050d31b179SPeter Wemmdevice		ppbus
20060d31b179SPeter Wemmdevice		vpo
20070d31b179SPeter Wemmdevice		lpt
20080d31b179SPeter Wemmdevice		plip
20090d31b179SPeter Wemmdevice		ppi
20100d31b179SPeter Wemmdevice		pps
20110d31b179SPeter Wemmdevice		lpbb
20120d31b179SPeter Wemmdevice		pcfclock
2013ab4c624bSMike Smith
2014432aad0eSTor Egge# Kernel BOOTP support
2015432aad0eSTor Egge
2016432aad0eSTor Eggeoptions 	BOOTP		# Use BOOTP to obtain IP address/hostname
201736fea630SBrian Somers				# Requires NFSCLIENT and NFS_ROOT
2018432aad0eSTor Eggeoptions 	BOOTP_NFSROOT	# NFS mount root filesystem using BOOTP info
20195895e3c8SPeter Wemmoptions 	BOOTP_NFSV3	# Use NFS v3 to NFS mount root
2020432aad0eSTor Eggeoptions 	BOOTP_COMPAT	# Workaround for broken bootp daemons.
20215895e3c8SPeter Wemmoptions 	BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2022432aad0eSTor Egge
2023d94f38acSEivind Eklund#
2024d94f38acSEivind Eklund# Add tie-ins for a hardware watchdog.  This only enable the hooks;
2025d94f38acSEivind Eklund# the user must still supply the actual driver.
2026d94f38acSEivind Eklund#
2027d94f38acSEivind Eklundoptions 	HW_WDOG
2028d94f38acSEivind Eklund
2029005092bbSEivind Eklund#
2030c796cfa1SAndrzej Bialecki# Disable swapping. This option removes all code which actually performs
2031c796cfa1SAndrzej Bialecki# swapping, so it's not possible to turn it back on at run-time.
2032c796cfa1SAndrzej Bialecki#
2033c796cfa1SAndrzej Bialecki# This is sometimes usable for systems which don't have any swap space
2034c796cfa1SAndrzej Bialecki# (see also sysctls "vm.defer_swapspace_pageouts" and
2035c796cfa1SAndrzej Bialecki# "vm.disable_swapspace_pageouts")
2036c796cfa1SAndrzej Bialecki#
203719dde963SPeter Wemm#options 	NO_SWAPPING
2038c796cfa1SAndrzej Bialecki
20399dab0776SDavid Greenman# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
20409dab0776SDavid Greenman# for sendfile(2) that are used to map file VM pages, and normally
20419dab0776SDavid Greenman# default to a quantity that is roughly 16*MAXUSERS+512. You would
20429dab0776SDavid Greenman# typically want about 4 of these for each simultaneous file send.
20439dab0776SDavid Greenman#
20445895e3c8SPeter Wemmoptions 	NSFBUFS=1024
20459dab0776SDavid Greenman
204615a1057cSEivind Eklund#
2047053a2b61SEivind Eklund# Enable extra debugging code for locks.  This stores the filename and
2048ec4e5afbSRobert Nordier# line of whatever acquired the lock in the lock itself, and change a
2049053a2b61SEivind Eklund# number of function calls to pass around the relevant data.  This is
2050053a2b61SEivind Eklund# not at all useful unless you are debugging lock code.  Also note
2051053a2b61SEivind Eklund# that it is likely to break e.g. fstat(1) unless you recompile your
2052053a2b61SEivind Eklund# userland with -DDEBUG_LOCKS as well.
205315a1057cSEivind Eklund#
205415a1057cSEivind Eklundoptions 	DEBUG_LOCKS
205515a1057cSEivind Eklund
205626086a03SPeter Wemm
205726086a03SPeter Wemm#####################################################################
20581d33cf3dSNick Hibma# USB support
20591d33cf3dSNick Hibma# UHCI controller
2060c9953c3bSPeter Wemmdevice		uhci
20611d33cf3dSNick Hibma# OHCI controller
2062c9953c3bSPeter Wemmdevice		ohci
20631d33cf3dSNick Hibma# General USB code (mandatory for USB)
2064c9953c3bSPeter Wemmdevice		usb
20651d33cf3dSNick Hibma#
2066b5ea1f0cSNick Hibma# USB Double Bulk Pipe devices
2067b5ea1f0cSNick Hibmadevice		udbp
2068f26c33d2SNick Hibma# Generic USB device driver
2069c9953c3bSPeter Wemmdevice		ugen
2070f26c33d2SNick Hibma# Human Interface Device (anything with buttons and dials)
2071c9953c3bSPeter Wemmdevice		uhid
20721d33cf3dSNick Hibma# USB keyboard
2073c9953c3bSPeter Wemmdevice		ukbd
20741d33cf3dSNick Hibma# USB printer
2075c9953c3bSPeter Wemmdevice		ulpt
20766521db35SKris Kennaway# USB Iomega Zip 100 Drive (Requires scbus and da)
2077c9953c3bSPeter Wemmdevice		umass
2078e9fb12d3SNick Hibma# USB modem support
2079e9fb12d3SNick Hibmadevice		umodem
2080f26c33d2SNick Hibma# USB mouse
2081c9953c3bSPeter Wemmdevice		ums
2082e2dbd15fSNick Hibma# Diamond Rio 500 Mp3 player
2083e2dbd15fSNick Hibmadevice		urio
20842fd84f56SNick Hibma# USB scanners
20852fd84f56SNick Hibmadevice		uscanner
2086916e6e02SJosef Karthauser# USB serial support
2087916e6e02SJosef Karthauserdevice		ucom
208848b68edfSJosef Karthauser# USB support for serial adapters based on the FT8U100AX and FT8U232AM
208948b68edfSJosef Karthauserdevice		uftdi
209048b68edfSJosef Karthauser# USB support for Prolific PL-2303 serial adapters
2091916e6e02SJosef Karthauserdevice		uplcom
20927d59efa9SAlexander Kabaev# USB support for Belkin F5U103 and compatible serial adapters
20937d59efa9SAlexander Kabaevdevice		ubsa
2094916e6e02SJosef Karthauser# USB serial support for DDI pocket's PHS
2095916e6e02SJosef Karthauserdevice		uvscom
209648b68edfSJosef Karthauser# USB Visor and Palm devices
209748b68edfSJosef Karthauserdevice		uvisor
209848b68edfSJosef Karthauser
209963c6b757SAlfred Perlstein# USB Fm Radio
210063c6b757SAlfred Perlsteindevice		ufm
2101f26c33d2SNick Hibma#
2102ed63a7aaSBill Paul# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2103d04bb221SBill Paul# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2104d04bb221SBill Paul# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2105d04bb221SBill Paul# eval board.
2106c9953c3bSPeter Wemmdevice		aue
2107dfd1e98eSBill Paul#
210801779872SBill Paul# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
210901779872SBill Paul# and Netmate II, and the Belkin F5U111.
2110c9953c3bSPeter Wemmdevice		cue
211101779872SBill Paul#
2112dfd1e98eSBill Paul# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2113d04bb221SBill Paul# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2114d04bb221SBill Paul# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
211501779872SBill Paul# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
211601779872SBill Paul# and 2104USB, and the Corega USB-T.
2117c9953c3bSPeter Wemmdevice		kue
2118f26c33d2SNick Hibma
2119f26c33d2SNick Hibma# debugging options for the USB subsystem
21201d33cf3dSNick Hibma#
21211d33cf3dSNick Hibmaoptions 	USB_DEBUG
2122f26c33d2SNick Hibma
21236e8394b8SKazutaka YOKOTA# options for ukbd:
21246e8394b8SKazutaka YOKOTAoptions 	UKBD_DFLT_KEYMAP	# specify the built-in keymap
2125cc6c2ad0SPeter Wemmmakeoptions	UKBD_DFLT_KEYMAP=it.iso
21266e8394b8SKazutaka YOKOTA
21278b7ce2ffSSam Leffler#####################################################################
21287d2ba89bSJohn Baldwin# Firewire support
21297d2ba89bSJohn Baldwin
21307d2ba89bSJohn Baldwindevice		firewire	# Firewire bus code
21317d2ba89bSJohn Baldwindevice		sbp		# SCSI over Firewire (Requires scbus and da)
21327d2ba89bSJohn Baldwindevice		fwe		# Ethernet over Firewire (non-standard!)
21337d2ba89bSJohn Baldwin
21347d2ba89bSJohn Baldwin#####################################################################
21358b7ce2ffSSam Leffler# crypto subsystem
21368b7ce2ffSSam Leffler#
21378b7ce2ffSSam Leffler# This is a port of the openbsd crypto framework.  Include this when
21388b7ce2ffSSam Leffler# configuring FAST_IPSEC and when you have a h/w crypto device to accelerate
21398b7ce2ffSSam Leffler# user applications that link to openssl.
21408b7ce2ffSSam Leffler#
21418b7ce2ffSSam Leffler# Drivers are ports from openbsd with some simple enhancements that have
21428b7ce2ffSSam Leffler# been fed back to openbsd.
21438b7ce2ffSSam Leffler
21448b7ce2ffSSam Lefflerdevice		crypto		# core crypto support
21458b7ce2ffSSam Lefflerdevice		cryptodev	# /dev/crypto for access to h/w
21468b7ce2ffSSam Leffler
21478b7ce2ffSSam Lefflerdevice		hifn		# Hifn 7951, 7781, etc.
21488b7ce2ffSSam Lefflerdevice		ubsec		# Broadcom 5501, 5601, 58xx
21498b7ce2ffSSam Leffler
21508b7ce2ffSSam Leffler#####################################################################
21518b7ce2ffSSam Leffler
21528b7ce2ffSSam Leffler
2153785d2100SJohn Birrell#
2154785d2100SJohn Birrell# Embedded system options:
2155785d2100SJohn Birrell#
2156785d2100SJohn Birrell# An embedded system might want to run something other than init.
215725388b6cSBruce Evansoptions 	INIT_PATH=/sbin/init:/stand/sysinstall
2158bc0e3a03SJeroen Ruigrok van der Werven
2159bc0e3a03SJeroen Ruigrok van der Werven# Debug options
2160bc0e3a03SJeroen Ruigrok van der Wervenoptions 	BUS_DEBUG	# enable newbus debugging
2161bc0e3a03SJeroen Ruigrok van der Wervenoptions 	DEBUG_VFS_LOCKS	# enable vfs lock debugging
2162bc0e3a03SJeroen Ruigrok van der Wervenoptions 	NPX_DEBUG	# enable npx debugging (FPU/math emu)
2163bc0e3a03SJeroen Ruigrok van der Werven
2164446af86dSJohn Baldwin#####################################################################
2165446af86dSJohn Baldwin# SYSV IPC KERNEL PARAMETERS
2166446af86dSJohn Baldwin#
2167446af86dSJohn Baldwin# Maximum number of entries in a semaphore map.
2168446af86dSJohn Baldwinoptions 	SEMMAP=31
2169446af86dSJohn Baldwin
2170446af86dSJohn Baldwin# Maximum number of System V semaphores that can be used on the system at
2171446af86dSJohn Baldwin# one time.
2172446af86dSJohn Baldwinoptions 	SEMMNI=11
2173446af86dSJohn Baldwin
2174446af86dSJohn Baldwin# Total number of semaphores system wide
2175446af86dSJohn Baldwinoptions 	SEMMNS=61
2176446af86dSJohn Baldwin
2177446af86dSJohn Baldwin# Total number of undo structures in system
2178446af86dSJohn Baldwinoptions 	SEMMNU=31
2179446af86dSJohn Baldwin
2180446af86dSJohn Baldwin# Maximum number of System V semaphores that can be used by a single process
2181446af86dSJohn Baldwin# at one time.
2182446af86dSJohn Baldwinoptions 	SEMMSL=61
2183446af86dSJohn Baldwin
2184446af86dSJohn Baldwin# Maximum number of operations that can be outstanding on a single System V
2185446af86dSJohn Baldwin# semaphore at one time.
2186446af86dSJohn Baldwinoptions 	SEMOPM=101
2187446af86dSJohn Baldwin
2188446af86dSJohn Baldwin# Maximum number of undo operations that can be outstanding on a single
2189446af86dSJohn Baldwin# System V semaphore at one time.
2190446af86dSJohn Baldwinoptions 	SEMUME=11
2191446af86dSJohn Baldwin
2192446af86dSJohn Baldwin# Maximum number of shared memory pages system wide.
2193446af86dSJohn Baldwinoptions 	SHMALL=1025
2194446af86dSJohn Baldwin
2195446af86dSJohn Baldwin# Maximum size, in bytes, of a single System V shared memory region.
219625388b6cSBruce Evansoptions 	SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2197446af86dSJohn Baldwinoptions 	SHMMAXPGS=1025
2198446af86dSJohn Baldwin
2199446af86dSJohn Baldwin# Minimum size, in bytes, of a single System V shared memory region.
2200446af86dSJohn Baldwinoptions 	SHMMIN=2
2201446af86dSJohn Baldwin
2202446af86dSJohn Baldwin# Maximum number of shared memory regions that can be used on the system
2203446af86dSJohn Baldwin# at one time.
2204446af86dSJohn Baldwinoptions 	SHMMNI=33
2205446af86dSJohn Baldwin
2206446af86dSJohn Baldwin# Maximum number of System V shared memory regions that can be attached to
2207446af86dSJohn Baldwin# a single process at one time.
2208446af86dSJohn Baldwinoptions 	SHMSEG=9
2209446af86dSJohn Baldwin
2210d9282887SDima Dorfman# Set the amount of time (in seconds) the system will wait before
2211d9282887SDima Dorfman# rebooting automatically when a kernel panic occurs.  If set to (-1),
2212d9282887SDima Dorfman# the system will wait indefinitely until a key is pressed on the
2213d9282887SDima Dorfman# console.
2214d9282887SDima Dorfmanoptions 	PANIC_REBOOT_WAIT_TIME=16
2215d9282887SDima Dorfman
2216446af86dSJohn Baldwin#####################################################################
2217446af86dSJohn Baldwin
2218bc0e3a03SJeroen Ruigrok van der Werven# More undocumented options for linting.
2219bc0e3a03SJeroen Ruigrok van der Werven# Note that documenting these are not considered an affront.
2220bc0e3a03SJeroen Ruigrok van der Werven
2221bc0e3a03SJeroen Ruigrok van der Wervenoptions 	CAM_DEBUG_DELAY
222228d7984fSJeroen Ruigrok van der Werven
222328d7984fSJeroen Ruigrok van der Werven# VFS cluster debugging.
2224bc0e3a03SJeroen Ruigrok van der Wervenoptions 	CLUSTERDEBUG
222528d7984fSJeroen Ruigrok van der Werven
2226bc0e3a03SJeroen Ruigrok van der Wervenoptions 	DEBUG
22278b6f5e65SJeroen Ruigrok van der Werven
222828d7984fSJeroen Ruigrok van der Werven# Kernel filelock debugging.
2229bc0e3a03SJeroen Ruigrok van der Wervenoptions 	LOCKF_DEBUG
223028d7984fSJeroen Ruigrok van der Werven
22318b6f5e65SJeroen Ruigrok van der Werven# System V compatible message queues
22328b6f5e65SJeroen Ruigrok van der Werven# Please note that the values provided here are used to test kernel
22338b6f5e65SJeroen Ruigrok van der Werven# building.  The defaults in the sources provide almost the same numbers.
22348b6f5e65SJeroen Ruigrok van der Werven# MSGSSZ must be a power of 2 between 8 and 1024.
22358b6f5e65SJeroen Ruigrok van der Wervenoptions 	MSGMNB=2049	# Max number of chars in queue
22368b6f5e65SJeroen Ruigrok van der Wervenoptions 	MSGMNI=41	# Max number of message queue identifiers
22378b6f5e65SJeroen Ruigrok van der Wervenoptions 	MSGSEG=2049	# Max number of message segments
22388b6f5e65SJeroen Ruigrok van der Wervenoptions 	MSGSSZ=16	# Size of a message segment
22398b6f5e65SJeroen Ruigrok van der Wervenoptions 	MSGTQL=41	# Max number of messages in system
22408b6f5e65SJeroen Ruigrok van der Werven
22418b6f5e65SJeroen Ruigrok van der Wervenoptions 	NBUF=512	# Number of buffer headers
22428b6f5e65SJeroen Ruigrok van der Werven
22438b6f5e65SJeroen Ruigrok van der Wervenoptions 	NMBCLUSTERS=1024	# Number of mbuf clusters
22448b6f5e65SJeroen Ruigrok van der Werven
2245bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_DEBUG
2246bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MAX_SYNC=10000
2247bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MAX_WIDE=1
2248bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SCSI_NCR_MYADDR=7
22498b6f5e65SJeroen Ruigrok van der Werven
22508b6f5e65SJeroen Ruigrok van der Wervenoptions 	SC_DEBUG_LEVEL=5	# Syscons debug level
22518b6f5e65SJeroen Ruigrok van der Wervenoptions 	SC_RENDER_DEBUG	# syscons rendering debugging
22528b6f5e65SJeroen Ruigrok van der Werven
2253bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SHOW_BUSYBUFS	# List buffers that prevent root unmount
2254bc0e3a03SJeroen Ruigrok van der Wervenoptions 	SLIP_IFF_OPTS
22558b6f5e65SJeroen Ruigrok van der Wervenoptions 	VFS_BIO_DEBUG	# VFS buffer I/O debugging
22568b6f5e65SJeroen Ruigrok van der Werven
2257316ec49aSScott Longoptions		KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2258316ec49aSScott Long
22591e9ea774SBruce Evans# Yet more undocumented options for linting.
22601e9ea774SBruce Evansoptions 	AAC_DEBUG
22611e9ea774SBruce Evansoptions 	ACD_DEBUG
22621e9ea774SBruce Evansoptions 	ACPI_MAX_THREADS=1
22631e9ea774SBruce Evans#!options 	ACPI_NO_SEMAPHORES
22641e9ea774SBruce Evans# Broken:
22651e9ea774SBruce Evans##options 	ASR_MEASURE_PERFORMANCE
22661e9ea774SBruce Evansoptions 	AST_DEBUG
22671e9ea774SBruce Evansoptions 	ATAPI_DEBUG
22681e9ea774SBruce Evansoptions 	ATA_DEBUG
22691e9ea774SBruce Evans# BKTR_ALLOC_PAGES has no effect except to cause warnings, and
22701e9ea774SBruce Evans# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
22711e9ea774SBruce Evans# driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
227225388b6cSBruce Evans##options 	BKTR_ALLOC_PAGES=(217*4+1)
227325388b6cSBruce Evansoptions 	BROOKTREE_ALLOC_PAGES=(217*4+1)
22741e9ea774SBruce Evansoptions 	MAXFILES=999
22751e9ea774SBruce Evans# METEOR_TEST_VIDEO has no effect since meteor is broken.
22761e9ea774SBruce Evansoptions 	METEOR_TEST_VIDEO
22771e9ea774SBruce Evansoptions 	NDEVFSINO=1025
22781e9ea774SBruce Evansoptions 	NDEVFSOVERFLOW=32769
22797f5092f3SJohn Baldwin
22807f5092f3SJohn Baldwin# Yet more undocumented options for linting.
22817f5092f3SJohn Baldwinoptions 	VGA_DEBUG
2282