1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2000 Matthew Jacob 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 34 #include <sys/conf.h> 35 #include <sys/errno.h> 36 #include <sys/fcntl.h> 37 #include <sys/kernel.h> 38 #include <sys/kthread.h> 39 #include <sys/lock.h> 40 #include <sys/malloc.h> 41 #include <sys/mutex.h> 42 #include <sys/proc.h> 43 #include <sys/queue.h> 44 #include <sys/sbuf.h> 45 #include <sys/sx.h> 46 #include <sys/sysent.h> 47 #include <sys/systm.h> 48 #include <sys/sysctl.h> 49 #include <sys/types.h> 50 51 #include <machine/stdarg.h> 52 53 #include <cam/cam.h> 54 #include <cam/cam_ccb.h> 55 #include <cam/cam_debug.h> 56 #include <cam/cam_periph.h> 57 #include <cam/cam_xpt_periph.h> 58 59 #include <cam/scsi/scsi_all.h> 60 #include <cam/scsi/scsi_message.h> 61 #include <cam/scsi/scsi_enc.h> 62 #include <cam/scsi/scsi_enc_internal.h> 63 64 #include "opt_ses.h" 65 66 MALLOC_DEFINE(M_SCSIENC, "SCSI ENC", "SCSI ENC buffers"); 67 68 /* Enclosure type independent driver */ 69 70 static d_open_t enc_open; 71 static d_close_t enc_close; 72 static d_ioctl_t enc_ioctl; 73 static periph_init_t enc_init; 74 static periph_ctor_t enc_ctor; 75 static periph_oninv_t enc_oninvalidate; 76 static periph_dtor_t enc_dtor; 77 78 static void enc_async(void *, uint32_t, struct cam_path *, void *); 79 static enctyp enc_type(struct ccb_getdev *); 80 81 SYSCTL_NODE(_kern_cam, OID_AUTO, enc, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, 82 "CAM Enclosure Services driver"); 83 84 #if defined(DEBUG) || defined(ENC_DEBUG) 85 int enc_verbose = 1; 86 #else 87 int enc_verbose = 0; 88 #endif 89 SYSCTL_INT(_kern_cam_enc, OID_AUTO, verbose, CTLFLAG_RWTUN, 90 &enc_verbose, 0, "Enable verbose logging"); 91 92 const char *elm_type_names[] = ELM_TYPE_NAMES; 93 CTASSERT(nitems(elm_type_names) - 1 == ELMTYP_LAST); 94 95 static struct periph_driver encdriver = { 96 enc_init, "ses", 97 TAILQ_HEAD_INITIALIZER(encdriver.units), /* generation */ 0 98 }; 99 100 PERIPHDRIVER_DECLARE(enc, encdriver); 101 102 static struct cdevsw enc_cdevsw = { 103 .d_version = D_VERSION, 104 .d_open = enc_open, 105 .d_close = enc_close, 106 .d_ioctl = enc_ioctl, 107 .d_name = "ses", 108 .d_flags = D_TRACKCLOSE, 109 }; 110 111 static void 112 enc_init(void) 113 { 114 cam_status status; 115 116 /* 117 * Install a global async callback. This callback will 118 * receive async callbacks like "new device found". 119 */ 120 status = xpt_register_async(AC_FOUND_DEVICE, enc_async, NULL, NULL); 121 122 if (status != CAM_REQ_CMP) { 123 printf("enc: Failed to attach master async callback " 124 "due to status 0x%x!\n", status); 125 } 126 } 127 128 static void 129 enc_devgonecb(void *arg) 130 { 131 struct cam_periph *periph; 132 struct enc_softc *enc; 133 struct mtx *mtx; 134 int i; 135 136 periph = (struct cam_periph *)arg; 137 mtx = cam_periph_mtx(periph); 138 mtx_lock(mtx); 139 enc = (struct enc_softc *)periph->softc; 140 141 /* 142 * When we get this callback, we will get no more close calls from 143 * devfs. So if we have any dangling opens, we need to release the 144 * reference held for that particular context. 145 */ 146 for (i = 0; i < enc->open_count; i++) 147 cam_periph_release_locked(periph); 148 149 enc->open_count = 0; 150 151 /* 152 * Release the reference held for the device node, it is gone now. 153 */ 154 cam_periph_release_locked(periph); 155 156 /* 157 * We reference the lock directly here, instead of using 158 * cam_periph_unlock(). The reason is that the final call to 159 * cam_periph_release_locked() above could result in the periph 160 * getting freed. If that is the case, dereferencing the periph 161 * with a cam_periph_unlock() call would cause a page fault. 162 */ 163 mtx_unlock(mtx); 164 } 165 166 static void 167 enc_oninvalidate(struct cam_periph *periph) 168 { 169 struct enc_softc *enc; 170 171 enc = periph->softc; 172 173 enc->enc_flags |= ENC_FLAG_INVALID; 174 175 /* If the sub-driver has an invalidate routine, call it */ 176 if (enc->enc_vec.softc_invalidate != NULL) 177 enc->enc_vec.softc_invalidate(enc); 178 179 /* 180 * Unregister any async callbacks. 181 */ 182 xpt_register_async(0, enc_async, periph, periph->path); 183 184 /* 185 * Shutdown our daemon. 186 */ 187 enc->enc_flags |= ENC_FLAG_SHUTDOWN; 188 if (enc->enc_daemon != NULL) { 189 /* Signal the ses daemon to terminate. */ 190 wakeup(enc->enc_daemon); 191 } 192 callout_drain(&enc->status_updater); 193 194 destroy_dev_sched_cb(enc->enc_dev, enc_devgonecb, periph); 195 } 196 197 static void 198 enc_dtor(struct cam_periph *periph) 199 { 200 struct enc_softc *enc; 201 202 enc = periph->softc; 203 204 /* If the sub-driver has a cleanup routine, call it */ 205 if (enc->enc_vec.softc_cleanup != NULL) 206 enc->enc_vec.softc_cleanup(enc); 207 208 root_mount_rel(&enc->enc_rootmount); 209 210 ENC_FREE(enc); 211 } 212 213 static void 214 enc_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) 215 { 216 struct cam_periph *periph; 217 218 periph = (struct cam_periph *)callback_arg; 219 220 switch(code) { 221 case AC_FOUND_DEVICE: 222 { 223 struct ccb_getdev *cgd; 224 cam_status status; 225 path_id_t path_id; 226 227 cgd = (struct ccb_getdev *)arg; 228 if (arg == NULL) { 229 break; 230 } 231 232 if (enc_type(cgd) == ENC_NONE) { 233 /* 234 * Schedule announcement of the ENC bindings for 235 * this device if it is managed by a SEP. 236 */ 237 path_id = xpt_path_path_id(path); 238 xpt_lock_buses(); 239 TAILQ_FOREACH(periph, &encdriver.units, unit_links) { 240 struct enc_softc *softc; 241 242 softc = (struct enc_softc *)periph->softc; 243 244 /* Check this SEP is ready. */ 245 if (softc == NULL || (softc->enc_flags & 246 ENC_FLAG_INITIALIZED) == 0 || 247 softc->enc_vec.device_found == NULL) 248 continue; 249 250 /* Check this SEP may manage this device. */ 251 if (xpt_path_path_id(periph->path) != path_id && 252 (softc->enc_type != ENC_SEMB_SES || 253 cgd->protocol != PROTO_ATA)) 254 continue; 255 256 softc->enc_vec.device_found(softc); 257 } 258 xpt_unlock_buses(); 259 return; 260 } 261 262 status = cam_periph_alloc(enc_ctor, enc_oninvalidate, 263 enc_dtor, NULL, "ses", CAM_PERIPH_BIO, 264 path, enc_async, AC_FOUND_DEVICE, cgd); 265 266 if (status != CAM_REQ_CMP && status != CAM_REQ_INPROG) { 267 printf("enc_async: Unable to probe new device due to " 268 "status 0x%x\n", status); 269 } 270 break; 271 } 272 default: 273 cam_periph_async(periph, code, path, arg); 274 break; 275 } 276 } 277 278 static int 279 enc_open(struct cdev *dev, int flags, int fmt, struct thread *td) 280 { 281 struct cam_periph *periph; 282 struct enc_softc *softc; 283 int error = 0; 284 285 periph = (struct cam_periph *)dev->si_drv1; 286 if (cam_periph_acquire(periph) != 0) 287 return (ENXIO); 288 289 cam_periph_lock(periph); 290 291 softc = (struct enc_softc *)periph->softc; 292 293 if ((softc->enc_flags & ENC_FLAG_INITIALIZED) == 0) { 294 error = ENXIO; 295 goto out; 296 } 297 if (softc->enc_flags & ENC_FLAG_INVALID) { 298 error = ENXIO; 299 goto out; 300 } 301 out: 302 if (error != 0) 303 cam_periph_release_locked(periph); 304 else 305 softc->open_count++; 306 307 cam_periph_unlock(periph); 308 309 return (error); 310 } 311 312 static int 313 enc_close(struct cdev *dev, int flag, int fmt, struct thread *td) 314 { 315 struct cam_periph *periph; 316 struct enc_softc *enc; 317 struct mtx *mtx; 318 319 periph = (struct cam_periph *)dev->si_drv1; 320 mtx = cam_periph_mtx(periph); 321 mtx_lock(mtx); 322 323 enc = periph->softc; 324 enc->open_count--; 325 326 cam_periph_release_locked(periph); 327 328 /* 329 * We reference the lock directly here, instead of using 330 * cam_periph_unlock(). The reason is that the call to 331 * cam_periph_release_locked() above could result in the periph 332 * getting freed. If that is the case, dereferencing the periph 333 * with a cam_periph_unlock() call would cause a page fault. 334 * 335 * cam_periph_release() avoids this problem using the same method, 336 * but we're manually acquiring and dropping the lock here to 337 * protect the open count and avoid another lock acquisition and 338 * release. 339 */ 340 mtx_unlock(mtx); 341 342 return (0); 343 } 344 345 int 346 enc_error(union ccb *ccb, uint32_t cflags, uint32_t sflags) 347 { 348 349 return (cam_periph_error(ccb, cflags, sflags)); 350 } 351 352 static int 353 enc_ioctl(struct cdev *dev, u_long cmd, caddr_t arg_addr, int flag, 354 struct thread *td) 355 { 356 struct cam_periph *periph; 357 encioc_enc_status_t tmp; 358 encioc_string_t sstr; 359 encioc_elm_status_t elms; 360 encioc_elm_desc_t elmd; 361 encioc_elm_devnames_t elmdn; 362 encioc_element_t *uelm; 363 enc_softc_t *enc; 364 enc_cache_t *cache; 365 void *addr; 366 int error, i; 367 368 #ifdef COMPAT_FREEBSD32 369 if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) 370 return (ENOTTY); 371 #endif 372 373 if (arg_addr) 374 addr = *((caddr_t *) arg_addr); 375 else 376 addr = NULL; 377 378 periph = (struct cam_periph *)dev->si_drv1; 379 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering encioctl\n")); 380 381 cam_periph_lock(periph); 382 enc = (struct enc_softc *)periph->softc; 383 cache = &enc->enc_cache; 384 385 /* 386 * Now check to see whether we're initialized or not. 387 * This actually should never fail as we're not supposed 388 * to get past enc_open w/o successfully initializing 389 * things. 390 */ 391 if ((enc->enc_flags & ENC_FLAG_INITIALIZED) == 0) { 392 cam_periph_unlock(periph); 393 return (ENXIO); 394 } 395 cam_periph_unlock(periph); 396 397 error = 0; 398 399 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, 400 ("trying to do ioctl %#lx\n", cmd)); 401 402 /* 403 * If this command can change the device's state, 404 * we must have the device open for writing. 405 * 406 * For commands that get information about the 407 * device- we don't need to lock the peripheral 408 * if we aren't running a command. The periph 409 * also can't go away while a user process has 410 * it open. 411 */ 412 switch (cmd) { 413 case ENCIOC_GETNELM: 414 case ENCIOC_GETELMMAP: 415 case ENCIOC_GETENCSTAT: 416 case ENCIOC_GETELMSTAT: 417 case ENCIOC_GETELMDESC: 418 case ENCIOC_GETELMDEVNAMES: 419 case ENCIOC_GETENCNAME: 420 case ENCIOC_GETENCID: 421 break; 422 default: 423 if ((flag & FWRITE) == 0) { 424 return (EBADF); 425 } 426 } 427 428 /* 429 * XXX The values read here are only valid for the current 430 * configuration generation. We need these ioctls 431 * to also pass in/out a generation number. 432 */ 433 sx_slock(&enc->enc_cache_lock); 434 switch (cmd) { 435 case ENCIOC_GETNELM: 436 error = copyout(&cache->nelms, addr, sizeof (cache->nelms)); 437 break; 438 439 case ENCIOC_GETELMMAP: 440 for (uelm = addr, i = 0; i != cache->nelms; i++) { 441 encioc_element_t kelm; 442 kelm.elm_idx = i; 443 kelm.elm_subenc_id = cache->elm_map[i].subenclosure; 444 kelm.elm_type = cache->elm_map[i].elm_type; 445 error = copyout(&kelm, &uelm[i], sizeof(kelm)); 446 if (error) 447 break; 448 } 449 break; 450 451 case ENCIOC_GETENCSTAT: 452 cam_periph_lock(periph); 453 error = enc->enc_vec.get_enc_status(enc, 1); 454 if (error) { 455 cam_periph_unlock(periph); 456 break; 457 } 458 tmp = cache->enc_status; 459 cam_periph_unlock(periph); 460 error = copyout(&tmp, addr, sizeof(tmp)); 461 cache->enc_status = tmp; 462 break; 463 464 case ENCIOC_SETENCSTAT: 465 error = copyin(addr, &tmp, sizeof(tmp)); 466 if (error) 467 break; 468 cam_periph_lock(periph); 469 error = enc->enc_vec.set_enc_status(enc, tmp, 1); 470 cam_periph_unlock(periph); 471 break; 472 473 case ENCIOC_GETSTRING: 474 case ENCIOC_SETSTRING: 475 case ENCIOC_GETENCNAME: 476 case ENCIOC_GETENCID: 477 if (enc->enc_vec.handle_string == NULL) { 478 error = EINVAL; 479 break; 480 } 481 error = copyin(addr, &sstr, sizeof(sstr)); 482 if (error) 483 break; 484 cam_periph_lock(periph); 485 error = enc->enc_vec.handle_string(enc, &sstr, cmd); 486 cam_periph_unlock(periph); 487 if (error == 0 || error == ENOMEM) 488 (void)copyout(&sstr.bufsiz, 489 &((encioc_string_t *)addr)->bufsiz, 490 sizeof(sstr.bufsiz)); 491 break; 492 493 case ENCIOC_GETELMSTAT: 494 error = copyin(addr, &elms, sizeof(elms)); 495 if (error) 496 break; 497 if (elms.elm_idx >= cache->nelms) { 498 error = EINVAL; 499 break; 500 } 501 cam_periph_lock(periph); 502 error = enc->enc_vec.get_elm_status(enc, &elms, 1); 503 cam_periph_unlock(periph); 504 if (error) 505 break; 506 error = copyout(&elms, addr, sizeof(elms)); 507 break; 508 509 case ENCIOC_GETELMDESC: 510 error = copyin(addr, &elmd, sizeof(elmd)); 511 if (error) 512 break; 513 if (elmd.elm_idx >= cache->nelms) { 514 error = EINVAL; 515 break; 516 } 517 if (enc->enc_vec.get_elm_desc != NULL) { 518 error = enc->enc_vec.get_elm_desc(enc, &elmd); 519 if (error) 520 break; 521 } else 522 elmd.elm_desc_len = 0; 523 error = copyout(&elmd, addr, sizeof(elmd)); 524 break; 525 526 case ENCIOC_GETELMDEVNAMES: 527 if (enc->enc_vec.get_elm_devnames == NULL) { 528 error = EINVAL; 529 break; 530 } 531 error = copyin(addr, &elmdn, sizeof(elmdn)); 532 if (error) 533 break; 534 if (elmdn.elm_idx >= cache->nelms) { 535 error = EINVAL; 536 break; 537 } 538 cam_periph_lock(periph); 539 error = (*enc->enc_vec.get_elm_devnames)(enc, &elmdn); 540 cam_periph_unlock(periph); 541 if (error) 542 break; 543 error = copyout(&elmdn, addr, sizeof(elmdn)); 544 break; 545 546 case ENCIOC_SETELMSTAT: 547 error = copyin(addr, &elms, sizeof(elms)); 548 if (error) 549 break; 550 551 if (elms.elm_idx >= cache->nelms) { 552 error = EINVAL; 553 break; 554 } 555 cam_periph_lock(periph); 556 error = enc->enc_vec.set_elm_status(enc, &elms, 1); 557 cam_periph_unlock(periph); 558 559 break; 560 561 case ENCIOC_INIT: 562 563 cam_periph_lock(periph); 564 error = enc->enc_vec.init_enc(enc); 565 cam_periph_unlock(periph); 566 break; 567 568 default: 569 cam_periph_lock(periph); 570 error = cam_periph_ioctl(periph, cmd, arg_addr, enc_error); 571 cam_periph_unlock(periph); 572 break; 573 } 574 sx_sunlock(&enc->enc_cache_lock); 575 return (error); 576 } 577 578 int 579 enc_runcmd(struct enc_softc *enc, char *cdb, int cdbl, char *dptr, int *dlenp) 580 { 581 int error, dlen, tdlen; 582 ccb_flags ddf; 583 union ccb *ccb; 584 585 CAM_DEBUG(enc->periph->path, CAM_DEBUG_TRACE, 586 ("entering enc_runcmd\n")); 587 if (dptr) { 588 if ((dlen = *dlenp) < 0) { 589 dlen = -dlen; 590 ddf = CAM_DIR_OUT; 591 } else { 592 ddf = CAM_DIR_IN; 593 } 594 } else { 595 dlen = 0; 596 ddf = CAM_DIR_NONE; 597 } 598 599 if (cdbl > IOCDBLEN) { 600 cdbl = IOCDBLEN; 601 } 602 603 ccb = cam_periph_getccb(enc->periph, CAM_PRIORITY_NORMAL); 604 if (enc->enc_type == ENC_SEMB_SES || enc->enc_type == ENC_SEMB_SAFT) { 605 tdlen = min(dlen, 1020); 606 tdlen = (tdlen + 3) & ~3; 607 cam_fill_ataio(&ccb->ataio, 0, NULL, ddf, 0, dptr, tdlen, 608 30 * 1000); 609 if (cdb[0] == RECEIVE_DIAGNOSTIC) 610 ata_28bit_cmd(&ccb->ataio, 611 ATA_SEP_ATTN, cdb[2], 0x02, tdlen / 4); 612 else if (cdb[0] == SEND_DIAGNOSTIC) 613 ata_28bit_cmd(&ccb->ataio, 614 ATA_SEP_ATTN, dlen > 0 ? dptr[0] : 0, 615 0x82, tdlen / 4); 616 else if (cdb[0] == READ_BUFFER) 617 ata_28bit_cmd(&ccb->ataio, 618 ATA_SEP_ATTN, cdb[2], 0x00, tdlen / 4); 619 else 620 ata_28bit_cmd(&ccb->ataio, 621 ATA_SEP_ATTN, dlen > 0 ? dptr[0] : 0, 622 0x80, tdlen / 4); 623 } else { 624 tdlen = dlen; 625 cam_fill_csio(&ccb->csio, 0, NULL, ddf, MSG_SIMPLE_Q_TAG, 626 dptr, dlen, sizeof (struct scsi_sense_data), cdbl, 627 60 * 1000); 628 bcopy(cdb, ccb->csio.cdb_io.cdb_bytes, cdbl); 629 } 630 631 error = cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL); 632 if (error) { 633 if (dptr) { 634 *dlenp = dlen; 635 } 636 } else { 637 if (dptr) { 638 if (ccb->ccb_h.func_code == XPT_ATA_IO) 639 *dlenp = ccb->ataio.resid; 640 else 641 *dlenp = ccb->csio.resid; 642 *dlenp += tdlen - dlen; 643 } 644 } 645 xpt_release_ccb(ccb); 646 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 647 ("exiting enc_runcmd: *dlenp = %d\n", *dlenp)); 648 return (error); 649 } 650 651 void 652 enc_log(struct enc_softc *enc, const char *fmt, ...) 653 { 654 va_list ap; 655 656 printf("%s%d: ", enc->periph->periph_name, enc->periph->unit_number); 657 va_start(ap, fmt); 658 vprintf(fmt, ap); 659 va_end(ap); 660 } 661 662 /* 663 * The code after this point runs on many platforms, 664 * so forgive the slightly awkward and nonconforming 665 * appearance. 666 */ 667 668 /* 669 * Is this a device that supports enclosure services? 670 * 671 * It's a pretty simple ruleset- if it is device type 672 * 0x0D (13), it's an ENCLOSURE device. 673 */ 674 675 #define SAFTE_START 44 676 #define SAFTE_END 50 677 #define SAFTE_LEN SAFTE_END-SAFTE_START 678 679 static enctyp 680 enc_type(struct ccb_getdev *cgd) 681 { 682 int buflen; 683 unsigned char *iqd; 684 685 if (cgd->protocol == PROTO_SEMB) { 686 iqd = (unsigned char *)&cgd->ident_data; 687 if (STRNCMP(iqd + 43, "S-E-S", 5) == 0) 688 return (ENC_SEMB_SES); 689 else if (STRNCMP(iqd + 43, "SAF-TE", 6) == 0) 690 return (ENC_SEMB_SAFT); 691 return (ENC_NONE); 692 693 } else if (cgd->protocol != PROTO_SCSI) 694 return (ENC_NONE); 695 696 iqd = (unsigned char *)&cgd->inq_data; 697 buflen = min(sizeof(cgd->inq_data), 698 SID_ADDITIONAL_LENGTH(&cgd->inq_data)); 699 700 if ((iqd[0] & 0x1f) == T_ENCLOSURE) 701 return (ENC_SES); 702 703 #ifdef SES_ENABLE_PASSTHROUGH 704 if ((iqd[6] & 0x40) && (iqd[2] & 0x7) >= 2) { 705 /* 706 * PassThrough Device. 707 */ 708 return (ENC_SES_PASSTHROUGH); 709 } 710 #endif 711 712 /* 713 * The comparison is short for a reason- 714 * some vendors were chopping it short. 715 */ 716 717 if (buflen < SAFTE_END - 2) { 718 return (ENC_NONE); 719 } 720 721 if (STRNCMP((char *)&iqd[SAFTE_START], "SAF-TE", SAFTE_LEN - 2) == 0) { 722 return (ENC_SAFT); 723 } 724 return (ENC_NONE); 725 } 726 727 /*================== Enclosure Monitoring/Processing Daemon ==================*/ 728 /** 729 * \brief Queue an update request for a given action, if needed. 730 * 731 * \param enc SES softc to queue the request for. 732 * \param action Action requested. 733 */ 734 void 735 enc_update_request(enc_softc_t *enc, uint32_t action) 736 { 737 if ((enc->pending_actions & (0x1 << action)) == 0) { 738 enc->pending_actions |= (0x1 << action); 739 ENC_DLOG(enc, "%s: queing requested action %d\n", 740 __func__, action); 741 if (enc->current_action == ENC_UPDATE_NONE) 742 wakeup(enc->enc_daemon); 743 } else { 744 ENC_DLOG(enc, "%s: ignoring requested action %d - " 745 "Already queued\n", __func__, action); 746 } 747 } 748 749 /** 750 * \brief Invoke the handler of the highest priority pending 751 * state in the SES state machine. 752 * 753 * \param enc The SES instance invoking the state machine. 754 */ 755 static void 756 enc_fsm_step(enc_softc_t *enc) 757 { 758 union ccb *ccb; 759 uint8_t *buf; 760 struct enc_fsm_state *cur_state; 761 int error; 762 uint32_t xfer_len; 763 764 ENC_DLOG(enc, "%s enter %p\n", __func__, enc); 765 766 enc->current_action = ffs(enc->pending_actions) - 1; 767 enc->pending_actions &= ~(0x1 << enc->current_action); 768 769 cur_state = &enc->enc_fsm_states[enc->current_action]; 770 771 buf = NULL; 772 if (cur_state->buf_size != 0) { 773 cam_periph_unlock(enc->periph); 774 buf = malloc(cur_state->buf_size, M_SCSIENC, M_WAITOK|M_ZERO); 775 cam_periph_lock(enc->periph); 776 } 777 778 error = 0; 779 ccb = NULL; 780 if (cur_state->fill != NULL) { 781 ccb = cam_periph_getccb(enc->periph, CAM_PRIORITY_NORMAL); 782 783 error = cur_state->fill(enc, cur_state, ccb, buf); 784 if (error != 0) 785 goto done; 786 787 error = cam_periph_runccb(ccb, cur_state->error, 788 ENC_CFLAGS, 789 ENC_FLAGS|SF_QUIET_IR, NULL); 790 } 791 792 if (ccb != NULL) { 793 if (ccb->ccb_h.func_code == XPT_ATA_IO) 794 xfer_len = ccb->ataio.dxfer_len - ccb->ataio.resid; 795 else 796 xfer_len = ccb->csio.dxfer_len - ccb->csio.resid; 797 } else 798 xfer_len = 0; 799 800 cam_periph_unlock(enc->periph); 801 cur_state->done(enc, cur_state, ccb, &buf, error, xfer_len); 802 cam_periph_lock(enc->periph); 803 804 done: 805 ENC_DLOG(enc, "%s exit - result %d\n", __func__, error); 806 ENC_FREE_AND_NULL(buf); 807 if (ccb != NULL) 808 xpt_release_ccb(ccb); 809 } 810 811 /** 812 * \invariant Called with cam_periph mutex held. 813 */ 814 static void 815 enc_status_updater(void *arg) 816 { 817 enc_softc_t *enc; 818 819 enc = arg; 820 if (enc->enc_vec.poll_status != NULL) 821 enc->enc_vec.poll_status(enc); 822 } 823 824 static void 825 enc_daemon(void *arg) 826 { 827 enc_softc_t *enc; 828 829 enc = arg; 830 831 cam_periph_lock(enc->periph); 832 while ((enc->enc_flags & ENC_FLAG_SHUTDOWN) == 0) { 833 if (enc->pending_actions == 0) { 834 /* 835 * Reset callout and msleep, or 836 * issue timed task completion 837 * status command. 838 */ 839 enc->current_action = ENC_UPDATE_NONE; 840 841 /* 842 * We've been through our state machine at least 843 * once. Allow the transition to userland. 844 */ 845 root_mount_rel(&enc->enc_rootmount); 846 847 callout_reset(&enc->status_updater, 60*hz, 848 enc_status_updater, enc); 849 850 cam_periph_sleep(enc->periph, enc->enc_daemon, 851 PUSER, "idle", 0); 852 } else { 853 enc_fsm_step(enc); 854 } 855 } 856 enc->enc_daemon = NULL; 857 cam_periph_unlock(enc->periph); 858 cam_periph_release(enc->periph); 859 kproc_exit(0); 860 } 861 862 static int 863 enc_kproc_init(enc_softc_t *enc) 864 { 865 int result; 866 867 callout_init_mtx(&enc->status_updater, cam_periph_mtx(enc->periph), 0); 868 869 if (cam_periph_acquire(enc->periph) != 0) 870 return (ENXIO); 871 872 result = kproc_create(enc_daemon, enc, &enc->enc_daemon, /*flags*/0, 873 /*stackpgs*/0, "enc_daemon%d", 874 enc->periph->unit_number); 875 if (result == 0) { 876 /* Do an initial load of all page data. */ 877 cam_periph_lock(enc->periph); 878 enc->enc_vec.poll_status(enc); 879 cam_periph_unlock(enc->periph); 880 } else 881 cam_periph_release(enc->periph); 882 return (result); 883 } 884 885 static cam_status 886 enc_ctor(struct cam_periph *periph, void *arg) 887 { 888 cam_status status = CAM_REQ_CMP_ERR; 889 int err; 890 enc_softc_t *enc; 891 struct ccb_getdev *cgd; 892 char *tname; 893 struct make_dev_args args; 894 struct sbuf sb; 895 896 cgd = (struct ccb_getdev *)arg; 897 if (cgd == NULL) { 898 printf("enc_ctor: no getdev CCB, can't register device\n"); 899 goto out; 900 } 901 902 enc = ENC_MALLOCZ(sizeof(*enc)); 903 if (enc == NULL) { 904 printf("enc_ctor: Unable to probe new device. " 905 "Unable to allocate enc\n"); 906 goto out; 907 } 908 enc->periph = periph; 909 enc->current_action = ENC_UPDATE_INVALID; 910 911 enc->enc_type = enc_type(cgd); 912 sx_init(&enc->enc_cache_lock, "enccache"); 913 914 switch (enc->enc_type) { 915 case ENC_SES: 916 case ENC_SES_PASSTHROUGH: 917 case ENC_SEMB_SES: 918 err = ses_softc_init(enc); 919 break; 920 case ENC_SAFT: 921 case ENC_SEMB_SAFT: 922 err = safte_softc_init(enc); 923 break; 924 case ENC_NONE: 925 default: 926 ENC_FREE(enc); 927 return (CAM_REQ_CMP_ERR); 928 } 929 930 if (err) { 931 xpt_print(periph->path, "error %d initializing\n", err); 932 goto out; 933 } 934 935 /* 936 * Hold off userland until we have made at least one pass 937 * through our state machine so that physical path data is 938 * present. 939 */ 940 if (enc->enc_vec.poll_status != NULL) { 941 root_mount_hold_token(periph->periph_name, &enc->enc_rootmount); 942 } 943 944 /* 945 * The softc field is set only once the enc is fully initialized 946 * so that we can rely on this field to detect partially 947 * initialized periph objects in the AC_FOUND_DEVICE handler. 948 */ 949 periph->softc = enc; 950 951 cam_periph_unlock(periph); 952 if (enc->enc_vec.poll_status != NULL) { 953 err = enc_kproc_init(enc); 954 if (err) { 955 xpt_print(periph->path, 956 "error %d starting enc_daemon\n", err); 957 goto out; 958 } 959 } 960 961 /* 962 * Acquire a reference to the periph before we create the devfs 963 * instance for it. We'll release this reference once the devfs 964 * instance has been freed. 965 */ 966 if (cam_periph_acquire(periph) != 0) { 967 xpt_print(periph->path, "%s: lost periph during " 968 "registration!\n", __func__); 969 cam_periph_lock(periph); 970 971 return (CAM_REQ_CMP_ERR); 972 } 973 974 make_dev_args_init(&args); 975 args.mda_devsw = &enc_cdevsw; 976 args.mda_unit = periph->unit_number; 977 args.mda_uid = UID_ROOT; 978 args.mda_gid = GID_OPERATOR; 979 args.mda_mode = 0600; 980 args.mda_si_drv1 = periph; 981 err = make_dev_s(&args, &enc->enc_dev, "%s%d", periph->periph_name, 982 periph->unit_number); 983 cam_periph_lock(periph); 984 if (err != 0) { 985 cam_periph_release_locked(periph); 986 return (CAM_REQ_CMP_ERR); 987 } 988 989 enc->enc_flags |= ENC_FLAG_INITIALIZED; 990 991 /* 992 * Add an async callback so that we get notified if this 993 * device goes away. 994 */ 995 xpt_register_async(AC_LOST_DEVICE, enc_async, periph, periph->path); 996 997 switch (enc->enc_type) { 998 default: 999 case ENC_NONE: 1000 tname = "No ENC device"; 1001 break; 1002 case ENC_SES: 1003 tname = "SES Device"; 1004 break; 1005 case ENC_SES_PASSTHROUGH: 1006 tname = "SES Passthrough Device"; 1007 break; 1008 case ENC_SAFT: 1009 tname = "SAF-TE Device"; 1010 break; 1011 case ENC_SEMB_SES: 1012 tname = "SEMB SES Device"; 1013 break; 1014 case ENC_SEMB_SAFT: 1015 tname = "SEMB SAF-TE Device"; 1016 break; 1017 } 1018 1019 sbuf_new(&sb, enc->announce_buf, ENC_ANNOUNCE_SZ, SBUF_FIXEDLEN); 1020 xpt_announce_periph_sbuf(periph, &sb, tname); 1021 sbuf_finish(&sb); 1022 sbuf_putbuf(&sb); 1023 1024 status = CAM_REQ_CMP; 1025 1026 out: 1027 if (status != CAM_REQ_CMP) 1028 enc_dtor(periph); 1029 return (status); 1030 } 1031