1Compilation: 2 Usual thing: rm -f Config.local ; make for vanilla 3 make refconf for reference clock (e. g. DCF77) 4 5Directory contents: 6 7 hints/PARSE - this file 8 9 xntpd/refclock_parse.c 10 - reference clock support for DCF77/GPS in xntp 11 parse/parse.c 12 - Reference clock data parser framework 13 parse/parse_conf.c 14 - parser configuration (clock types) 15 parse/clk_meinberg.c 16 - Meinberg clock formats (DCF U/A 31, PZF 535, GPS166) 17 parse/clk_schmid.c 18 - Schmid receiver (DCF77) 19 parse/clk_rawdcf.c 20 - 100/200ms pulses via 50 Baud line (DCF77) 21 parse/clk_dcf7000.c 22 - ELV DCF7000 (DCF77) 23 parse/clk_trimble.c 24 - Trimble SV6 GPS receiver 25 26 If you want to add new clock types please check 27 with kardel@informatik.uni-erlangen.de. These files 28 implement the conversion of RS232 data streams into 29 timing information used by refclock_parse.c which is 30 mostly generic except for NTP configuration constants. 31 32 parse/Makefile.kernel 33 - *SIMPLE* makefile to build a loadable STREAMS 34 module for SunOS 4.x / SunOS 5.x systems 35 36 parse/parsestreams.c 37 - SUN Streams module (loadable) for radio clocks 38 This streams module is designed for SunOS 4.1.X. 39 40 parse/parsesolaris.c 41 - SUN Streams module (loadable) for radio clocks. 42 This streams module is designed for SunOS 5.x 43 Beware this is still new - so it might crash 44 your machine (we have seen it working, though). 45 46 parse/parsetest.c 47 - simple test program for STREAMS module. Its so simple, 48 that it doesn't even set TTY-modes, thus they got to 49 be correct on startup - works for Meinberg receivers 50 51 parse/testdcf.c 52 - test program for raw DCF77 (100/200ms pulses) 53 receivers 54 55 include/parse.h - interface to "parse" module and more 56 include/parse_conf.h 57 - interface to "parse" configuration 58 59 include/sys/parsestreams.h 60 - STREAMS specific definitions 61 62 scripts/support 63 - scripts (perl & sh) for statistics and rc startup 64 the startup scripts are used in Erlangen for 65 starting the daemon on a variety of Suns and HPs 66 and for Reference Clock startup on Suns 67 These scripts may or may not be helpful to you. 68 69Supported clocks: 70 Meinberg DCF U/A 31 71 Meinberg PZF535/TCXO (Software revision PZFUERL 4.6) 72 Meinberg PZF535/OCXO (Software revision PZFUERL 4.6) 73 Meinberg GPS166 (Software version for Uni-Erlangen) 74 ELV DCF7000 (not recommended - casual/emergency use only) 75 Conrad DCF77 receiver (email: time@informatik.uni-erlangen.de) 76 + level converter 77 TimeBrick (email: time@informatik.uni-erlangen.de) 78 Schmid Receiver Kit 79 Trimble SV6 GPS receiver 80 81Addresses: 82 Meinberg Funkuhren 83 Auf der Landwehr 22 84 31812 Bad Pyrmont 85 Germany 86 Tel.: 05281/20 18 87 FAX: 05281/60 81 80 88 89 ELV Kundenservice 90 Postfach 1000 91 26787 Leer 92 Germany 93 Tel.: 0491/60 08 88 94 95 Walter Schmidt 96 Eichwisrain 14 97 8634 Hombrechtikon 98 Switzerland 99 100If you have problems mail to: 101 102 time@informatik.uni-erlangen.de 103 104We'll help (conditions permitting) 105 106