1#! /bin/sh 2# 3# SPDX-License-Identifier: BSD-2-Clause 4# 5# Copyright (c) 2018-2021 Gavin D. Howard and contributors. 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions are met: 9# 10# * Redistributions of source code must retain the above copyright notice, this 11# list of conditions and the following disclaimer. 12# 13# * Redistributions in binary form must reproduce the above copyright notice, 14# this list of conditions and the following disclaimer in the documentation 15# and/or other materials provided with the distribution. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 18# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 21# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 22# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 25# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 27# POSSIBILITY OF SUCH DAMAGE. 28# 29 30script="$0" 31scriptdir=$(dirname "$script") 32script=$(basename "$script") 33 34. "$scriptdir/functions.sh" 35 36cd "$scriptdir" 37 38usage() { 39 40 if [ $# -gt 0 ]; then 41 42 _usage_val=1 43 44 printf "%s\n\n" "$1" 45 46 else 47 _usage_val=0 48 fi 49 50 printf 'usage:\n' 51 printf ' %s -h\n' "$script" 52 printf ' %s --help\n' "$script" 53 printf ' %s [-a|-bD|-dB|-c] [-CEfgGHlmMNPtTvz] [-O OPT_LEVEL] [-k KARATSUBA_LEN]\n' "$script" 54 printf ' %s \\\n' "$script" 55 printf ' [--library|--bc-only --disable-dc|--dc-only --disable-bc|--coverage]\\\n' 56 printf ' [--force --debug --disable-extra-math --disable-generated-tests] \\\n' 57 printf ' [--disable-history --disable-man-pages --disable-nls] \\\n' 58 printf ' [--disable-prompt --disable-strip] [--install-all-locales] \\\n' 59 printf ' [--opt=OPT_LEVEL] [--karatsuba-len=KARATSUBA_LEN] \\\n' 60 printf ' [--prefix=PREFIX] [--bindir=BINDIR] [--datarootdir=DATAROOTDIR] \\\n' 61 printf ' [--datadir=DATADIR] [--mandir=MANDIR] [--man1dir=MAN1DIR] \\\n' 62 printf '\n' 63 printf ' -a, --library\n' 64 printf ' Build the libbc instead of the programs. This is meant to be used with\n' 65 printf ' Other software like programming languages that want to make use of the\n' 66 printf ' parsing and math capabilities. This option will install headers using\n' 67 printf ' `make install`.\n' 68 printf ' -b, --bc-only\n' 69 printf ' Build bc only. It is an error if "-d", "--dc-only", "-B", or\n' 70 printf ' "--disable-bc" are specified too.\n' 71 printf ' -B, --disable-bc\n' 72 printf ' Disable bc. It is an error if "-b", "--bc-only", "-D", or "--disable-dc"\n' 73 printf ' are specified too.\n' 74 printf ' -c, --coverage\n' 75 printf ' Generate test coverage code. Requires gcov and regcovr.\n' 76 printf ' It is an error if either "-b" ("-D") or "-d" ("-B") is specified.\n' 77 printf ' Requires a compiler that use gcc-compatible coverage options\n' 78 printf ' -C, --disable-clean\n' 79 printf ' Disable the clean that configure.sh does before configure.\n' 80 printf ' -d, --dc-only\n' 81 printf ' Build dc only. It is an error if "-b", "--bc-only", "-D", or\n' 82 printf ' "--disable-dc" are specified too.\n' 83 printf ' -D, --disable-dc\n' 84 printf ' Disable dc. It is an error if "-d", "--dc-only", "-B", or "--disable-bc"\n' 85 printf ' are specified too.\n' 86 printf ' -E, --disable-extra-math\n' 87 printf ' Disable extra math. This includes: "$" operator (truncate to integer),\n' 88 printf ' "@" operator (set number of decimal places), and r(x, p) (rounding\n' 89 printf ' function). Additionally, this option disables the extra printing\n' 90 printf ' functions in the math library.\n' 91 printf ' -f, --force\n' 92 printf ' Force use of all enabled options, even if they do not work. This\n' 93 printf ' option is to allow the maintainer a way to test that certain options\n' 94 printf ' are not failing invisibly. (Development only.)' 95 printf ' -g, --debug\n' 96 printf ' Build in debug mode. Adds the "-g" flag, and if there are no\n' 97 printf ' other CFLAGS, and "-O" was not given, this also adds the "-O0"\n' 98 printf ' flag. If this flag is *not* given, "-DNDEBUG" is added to CPPFLAGS\n' 99 printf ' and a strip flag is added to the link stage.\n' 100 printf ' -G, --disable-generated-tests\n' 101 printf ' Disable generating tests. This is for platforms that do not have a\n' 102 printf ' GNU bc-compatible bc to generate tests.\n' 103 printf ' -h, --help\n' 104 printf ' Print this help message and exit.\n' 105 printf ' -H, --disable-history\n' 106 printf ' Disable history.\n' 107 printf ' -k KARATSUBA_LEN, --karatsuba-len KARATSUBA_LEN\n' 108 printf ' Set the karatsuba length to KARATSUBA_LEN (default is 64).\n' 109 printf ' It is an error if KARATSUBA_LEN is not a number or is less than 16.\n' 110 printf ' -l, --install-all-locales\n' 111 printf ' Installs all locales, regardless of how many are on the system. This\n' 112 printf ' option is useful for package maintainers who want to make sure that\n' 113 printf ' a package contains all of the locales that end users might need.\n' 114 printf ' -m, --enable-memcheck\n' 115 printf ' Enable memcheck mode, to ensure no memory leaks. For development only.\n' 116 printf ' -M, --disable-man-pages\n' 117 printf ' Disable installing manpages.\n' 118 printf ' -N, --disable-nls\n' 119 printf ' Disable POSIX locale (NLS) support.\n' 120 printf ' -O OPT_LEVEL, --opt OPT_LEVEL\n' 121 printf ' Set the optimization level. This can also be included in the CFLAGS,\n' 122 printf ' but it is provided, so maintainers can build optimized debug builds.\n' 123 printf ' This is passed through to the compiler, so it must be supported.\n' 124 printf ' -P, --disable-prompt\n' 125 printf ' Disables the prompt in the built bc. The prompt will never show up,\n' 126 printf ' or in other words, it will be permanently disabled and cannot be\n' 127 printf ' enabled.\n' 128 printf ' -t, --enable-test-timing\n' 129 printf ' Enable the timing of tests. This is for development only.\n' 130 printf ' -T, --disable-strip\n' 131 printf ' Disable stripping symbols from the compiled binary or binaries.\n' 132 printf ' Stripping symbols only happens when debug mode is off.\n' 133 printf ' -v, --enable-valgrind\n' 134 printf ' Enable a build appropriate for valgrind. For development only.\n' 135 printf ' -z, --enable-fuzz-mode\n' 136 printf ' Enable fuzzing mode. THIS IS FOR DEVELOPMENT ONLY.\n' 137 printf ' --prefix PREFIX\n' 138 printf ' The prefix to install to. Overrides "$PREFIX" if it exists.\n' 139 printf ' If PREFIX is "/usr", install path will be "/usr/bin".\n' 140 printf ' Default is "/usr/local".\n' 141 printf ' --bindir BINDIR\n' 142 printf ' The directory to install binaries in. Overrides "$BINDIR" if it exists.\n' 143 printf ' Default is "$PREFIX/bin".\n' 144 printf ' --includedir INCLUDEDIR\n' 145 printf ' The directory to install headers in. Overrides "$INCLUDEDIR" if it\n' 146 printf ' exists. Default is "$PREFIX/include".\n' 147 printf ' --libdir LIBDIR\n' 148 printf ' The directory to install libraries in. Overrides "$LIBDIR" if it exists.\n' 149 printf ' Default is "$PREFIX/lib".\n' 150 printf ' --datarootdir DATAROOTDIR\n' 151 printf ' The root location for data files. Overrides "$DATAROOTDIR" if it exists.\n' 152 printf ' Default is "$PREFIX/share".\n' 153 printf ' --datadir DATADIR\n' 154 printf ' The location for data files. Overrides "$DATADIR" if it exists.\n' 155 printf ' Default is "$DATAROOTDIR".\n' 156 printf ' --mandir MANDIR\n' 157 printf ' The location to install manpages to. Overrides "$MANDIR" if it exists.\n' 158 printf ' Default is "$DATADIR/man".\n' 159 printf ' --man1dir MAN1DIR\n' 160 printf ' The location to install Section 1 manpages to. Overrides "$MAN1DIR" if\n' 161 printf ' it exists. Default is "$MANDIR/man1".\n' 162 printf ' --man3dir MAN3DIR\n' 163 printf ' The location to install Section 3 manpages to. Overrides "$MAN3DIR" if\n' 164 printf ' it exists. Default is "$MANDIR/man3".\n' 165 printf '\n' 166 printf 'In addition, the following environment variables are used:\n' 167 printf '\n' 168 printf ' CC C compiler. Must be compatible with POSIX c99. If there is a\n' 169 printf ' space in the basename of the compiler, the items after the\n' 170 printf ' first space are assumed to be compiler flags, and in that case,\n' 171 printf ' the flags are automatically moved into CFLAGS. Default is\n' 172 printf ' "c99".\n' 173 printf ' HOSTCC Host C compiler. Must be compatible with POSIX c99. If there is\n' 174 printf ' a space in the basename of the compiler, the items after the\n' 175 printf ' first space are assumed to be compiler flags, and in the case,\n' 176 printf ' the flags are automatically moved into HOSTCFLAGS. Default is\n' 177 printf ' "$CC".\n' 178 printf ' HOST_CC Same as HOSTCC. If HOSTCC also exists, it is used.\n' 179 printf ' CFLAGS C compiler flags.\n' 180 printf ' HOSTCFLAGS CFLAGS for HOSTCC. Default is "$CFLAGS".\n' 181 printf ' HOST_CFLAGS Same as HOST_CFLAGS. If HOST_CFLAGS also exists, it is used.\n' 182 printf ' CPPFLAGS C preprocessor flags. Default is "".\n' 183 printf ' LDFLAGS Linker flags. Default is "".\n' 184 printf ' PREFIX The prefix to install to. Default is "/usr/local".\n' 185 printf ' If PREFIX is "/usr", install path will be "/usr/bin".\n' 186 printf ' BINDIR The directory to install binaries in. Default is "$PREFIX/bin".\n' 187 printf ' INCLUDEDIR The directory to install header files in. Default is\n' 188 printf ' "$PREFIX/include".\n' 189 printf ' LIBDIR The directory to install libraries in. Default is\n' 190 printf ' "$PREFIX/lib".\n' 191 printf ' DATAROOTDIR The root location for data files. Default is "$PREFIX/share".\n' 192 printf ' DATADIR The location for data files. Default is "$DATAROOTDIR".\n' 193 printf ' MANDIR The location to install manpages to. Default is "$DATADIR/man".\n' 194 printf ' MAN1DIR The location to install Section 1 manpages to. Default is\n' 195 printf ' "$MANDIR/man1".\n' 196 printf ' MAN3DIR The location to install Section 3 manpages to. Default is\n' 197 printf ' "$MANDIR/man3".\n' 198 printf ' NLSPATH The location to install locale catalogs to. Must be an absolute\n' 199 printf ' path (or contain one). This is treated the same as the POSIX\n' 200 printf ' definition of $NLSPATH (see POSIX environment variables for\n' 201 printf ' more information). Default is "/usr/share/locale/%%L/%%N".\n' 202 printf ' EXECSUFFIX The suffix to append to the executable names, used to not\n' 203 printf ' interfere with other installed bc executables. Default is "".\n' 204 printf ' EXECPREFIX The prefix to append to the executable names, used to not\n' 205 printf ' interfere with other installed bc executables. Default is "".\n' 206 printf ' DESTDIR For package creation. Default is "". If it is empty when\n' 207 printf ' `%s` is run, it can also be passed to `make install`\n' "$script" 208 printf ' later as an environment variable. If both are specified,\n' 209 printf ' the one given to `%s` takes precedence.\n' "$script" 210 printf ' LONG_BIT The number of bits in a C `long` type. This is mostly for the\n' 211 printf ' embedded space since this `bc` uses `long`s internally for\n' 212 printf ' overflow checking. In C99, a `long` is required to be 32 bits.\n' 213 printf ' For most normal desktop systems, setting this is unnecessary,\n' 214 printf ' except that 32-bit platforms with 64-bit longs may want to set\n' 215 printf ' it to `32`. Default is the default of `LONG_BIT` for the target\n' 216 printf ' platform. Minimum allowed is `32`. It is a build time error if\n' 217 printf ' the specified value of `LONG_BIT` is greater than the default\n' 218 printf ' value of `LONG_BIT` for the target platform.\n' 219 printf ' GEN_HOST Whether to use `gen/strgen.c`, instead of `gen/strgen.sh`, to\n' 220 printf ' produce the C files that contain the help texts as well as the\n' 221 printf ' math libraries. By default, `gen/strgen.c` is used, compiled by\n' 222 printf ' "$HOSTCC" and run on the host machine. Using `gen/strgen.sh`\n' 223 printf ' removes the need to compile and run an executable on the host\n' 224 printf ' machine since `gen/strgen.sh` is a POSIX shell script. However,\n' 225 printf ' `gen/lib2.bc` is perilously close to 4095 characters, the max\n' 226 printf ' supported length of a string literal in C99 (and it could be\n' 227 printf ' added to in the future), and `gen/strgen.sh` generates a string\n' 228 printf ' literal instead of an array, as `gen/strgen.c` does. For most\n' 229 printf ' production-ready compilers, this limit probably is not\n' 230 printf ' enforced, but it could be. Both options are still available for\n' 231 printf ' this reason. If you are sure your compiler does not have the\n' 232 printf ' limit and do not want to compile and run a binary on the host\n' 233 printf ' machine, set this variable to "0". Any other value, or a\n' 234 printf ' non-existent value, will cause the build system to compile and\n' 235 printf ' run `gen/strgen.c`. Default is "".\n' 236 printf ' GEN_EMU Emulator to run string generator code under (leave empty if not\n' 237 printf ' necessary). This is not necessary when using `gen/strgen.sh`.\n' 238 printf ' Default is "".\n' 239 printf '\n' 240 printf 'WARNING: even though `configure.sh` supports both option types, short and\n' 241 printf 'long, it does not support handling both at the same time. Use only one type.\n' 242 243 exit "$_usage_val" 244} 245 246replace_ext() { 247 248 if [ "$#" -ne 3 ]; then 249 err_exit "Invalid number of args to $0" 250 fi 251 252 _replace_ext_file="$1" 253 _replace_ext_ext1="$2" 254 _replace_ext_ext2="$3" 255 256 _replace_ext_result="${_replace_ext_file%.$_replace_ext_ext1}.$_replace_ext_ext2" 257 258 printf '%s\n' "$_replace_ext_result" 259} 260 261replace_exts() { 262 263 if [ "$#" -ne 3 ]; then 264 err_exit "Invalid number of args to $0" 265 fi 266 267 _replace_exts_files="$1" 268 _replace_exts_ext1="$2" 269 _replace_exts_ext2="$3" 270 271 for _replace_exts_file in $_replace_exts_files; do 272 _replace_exts_new_name=$(replace_ext "$_replace_exts_file" "$_replace_exts_ext1" "$_replace_exts_ext2") 273 _replace_exts_result="$_replace_exts_result $_replace_exts_new_name" 274 done 275 276 printf '%s\n' "$_replace_exts_result" 277} 278 279replace() { 280 281 if [ "$#" -ne 3 ]; then 282 err_exit "Invalid number of args to $0" 283 fi 284 285 _replace_str="$1" 286 _replace_needle="$2" 287 _replace_replacement="$3" 288 289 substring_replace "$_replace_str" "%%$_replace_needle%%" "$_replace_replacement" 290} 291 292find_src_files() { 293 294 if [ "$#" -ge 1 ] && [ "$1" != "" ]; then 295 296 while [ "$#" -ge 1 ]; do 297 _find_src_files_a="${1## }" 298 shift 299 _find_src_files_args="$_find_src_files_args ! -path src/${_find_src_files_a}" 300 done 301 302 else 303 _find_src_files_args="-print" 304 fi 305 306 printf '%s\n' $(find src/ -depth -name "*.c" $_find_src_files_args) 307} 308 309gen_file_list() { 310 311 if [ "$#" -lt 1 ]; then 312 err_exit "Invalid number of args to $0" 313 fi 314 315 _gen_file_list_contents="$1" 316 shift 317 318 p=$(pwd) 319 320 cd "$scriptdir" 321 322 if [ "$#" -ge 1 ]; then 323 _gen_file_list_unneeded="$@" 324 else 325 _gen_file_list_unneeded="" 326 fi 327 328 _gen_file_list_needle_src="SRC" 329 _gen_file_list_needle_obj="OBJ" 330 _gen_file_list_needle_gcda="GCDA" 331 _gen_file_list_needle_gcno="GCNO" 332 333 _gen_file_list_replacement=$(find_src_files $_gen_file_list_unneeded | tr '\n' ' ') 334 _gen_file_list_contents=$(replace "$_gen_file_list_contents" \ 335 "$_gen_file_list_needle_src" "$_gen_file_list_replacement") 336 337 _gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "c" "o") 338 _gen_file_list_contents=$(replace "$_gen_file_list_contents" \ 339 "$_gen_file_list_needle_obj" "$_gen_file_list_replacement") 340 341 _gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "o" "gcda") 342 _gen_file_list_contents=$(replace "$_gen_file_list_contents" \ 343 "$_gen_file_list_needle_gcda" "$_gen_file_list_replacement") 344 345 _gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "gcda" "gcno") 346 _gen_file_list_contents=$(replace "$_gen_file_list_contents" \ 347 "$_gen_file_list_needle_gcno" "$_gen_file_list_replacement") 348 349 cd "$p" 350 351 printf '%s\n' "$_gen_file_list_contents" 352} 353 354gen_tests() { 355 356 _gen_tests_name="$1" 357 shift 358 359 _gen_tests_uname="$1" 360 shift 361 362 _gen_tests_extra_math="$1" 363 shift 364 365 _gen_tests_time_tests="$1" 366 shift 367 368 _gen_tests_extra_required=$(cat tests/extra_required.txt) 369 370 for _gen_tests_t in $(cat "$scriptdir/tests/$_gen_tests_name/all.txt"); do 371 372 if [ "$_gen_tests_extra_math" -eq 0 ]; then 373 374 if [ -z "${_gen_tests_extra_required##*$_gen_tests_t*}" ]; then 375 printf 'test_%s_%s:\n\t@printf "Skipping %s %s\\n"\n\n' \ 376 "$_gen_tests_name" "$_gen_tests_t" "$_gen_tests_name" \ 377 "$_gen_tests_t" >> "$scriptdir/Makefile" 378 continue 379 fi 380 381 fi 382 383 printf 'test_%s_%s:\n\t@sh tests/test.sh %s %s %s %s %s\n\n' \ 384 "$_gen_tests_name" "$_gen_tests_t" "$_gen_tests_name" \ 385 "$_gen_tests_t" "$generate_tests" "$time_tests" \ 386 "$*" >> "$scriptdir/Makefile" 387 388 done 389} 390 391gen_test_targets() { 392 393 _gen_test_targets_name="$1" 394 shift 395 396 _gen_test_targets_tests=$(cat "$scriptdir/tests/${_gen_test_targets_name}/all.txt") 397 398 for _gen_test_targets_t in $_gen_test_targets_tests; do 399 printf ' test_%s_%s' "$_gen_test_targets_name" "$_gen_test_targets_t" 400 done 401 402 printf '\n' 403} 404 405gen_script_tests() { 406 407 _gen_script_tests_name="$1" 408 shift 409 410 _gen_script_tests_extra_math="$1" 411 shift 412 413 _gen_script_tests_generate="$1" 414 shift 415 416 _gen_script_tests_time="$1" 417 shift 418 419 _gen_script_tests_tests=$(cat "$scriptdir/tests/$_gen_script_tests_name/scripts/all.txt") 420 421 for _gen_script_tests_f in $_gen_script_tests_tests; do 422 423 _gen_script_tests_b=$(basename "$_gen_script_tests_f" ".${_gen_script_tests_name}") 424 425 printf 'test_%s_script_%s:\n\t@sh tests/script.sh %s %s %s 1 %s %s %s\n\n' \ 426 "$_gen_script_tests_name" "$_gen_script_tests_b" "$_gen_script_tests_name" \ 427 "$_gen_script_tests_f" "$_gen_script_tests_extra_math" "$_gen_script_tests_generate" \ 428 "$_gen_script_tests_time" "$*" >> "$scriptdir/Makefile" 429 done 430} 431 432gen_script_test_targets() { 433 434 _gen_script_test_targets_name="$1" 435 shift 436 437 _gen_script_test_targets_tests=$(cat "$scriptdir/tests/$_gen_script_test_targets_name/scripts/all.txt") 438 439 for _gen_script_test_targets_f in $_gen_script_test_targets_tests; do 440 _gen_script_test_targets_b=$(basename "$_gen_script_test_targets_f" \ 441 ".$_gen_script_test_targets_name") 442 printf ' test_%s_script_%s' "$_gen_script_test_targets_name" \ 443 "$_gen_script_test_targets_b" 444 done 445 446 printf '\n' 447} 448 449bc_only=0 450dc_only=0 451coverage=0 452karatsuba_len=32 453debug=0 454hist=1 455extra_math=1 456optimization="" 457generate_tests=1 458install_manpages=1 459nls=1 460prompt=1 461force=0 462strip_bin=1 463all_locales=0 464library=0 465fuzz=0 466time_tests=0 467vg=0 468memcheck=0 469clean=1 470 471while getopts "abBcdDEfgGhHk:lMmNO:PStTvz-" opt; do 472 473 case "$opt" in 474 a) library=1 ;; 475 b) bc_only=1 ;; 476 B) dc_only=1 ;; 477 c) coverage=1 ;; 478 C) clean=0 ;; 479 d) dc_only=1 ;; 480 D) bc_only=1 ;; 481 E) extra_math=0 ;; 482 f) force=1 ;; 483 g) debug=1 ;; 484 G) generate_tests=0 ;; 485 h) usage ;; 486 H) hist=0 ;; 487 k) karatsuba_len="$OPTARG" ;; 488 l) all_locales=1 ;; 489 m) memcheck=1 ;; 490 M) install_manpages=0 ;; 491 N) nls=0 ;; 492 O) optimization="$OPTARG" ;; 493 P) prompt=0 ;; 494 t) time_tests=1 ;; 495 T) strip_bin=0 ;; 496 v) vg=1 ;; 497 z) fuzz=1 ;; 498 -) 499 arg="$1" 500 arg="${arg#--}" 501 LONG_OPTARG="${arg#*=}" 502 case $arg in 503 help) usage ;; 504 library) library=1 ;; 505 bc-only) bc_only=1 ;; 506 dc-only) dc_only=1 ;; 507 coverage) coverage=1 ;; 508 debug) debug=1 ;; 509 force) force=1 ;; 510 prefix=?*) PREFIX="$LONG_OPTARG" ;; 511 prefix) 512 if [ "$#" -lt 2 ]; then 513 usage "No argument given for '--$arg' option" 514 fi 515 PREFIX="$2" 516 shift ;; 517 bindir=?*) BINDIR="$LONG_OPTARG" ;; 518 bindir) 519 if [ "$#" -lt 2 ]; then 520 usage "No argument given for '--$arg' option" 521 fi 522 BINDIR="$2" 523 shift ;; 524 includedir=?*) INCLUDEDIR="$LONG_OPTARG" ;; 525 includedir) 526 if [ "$#" -lt 2 ]; then 527 usage "No argument given for '--$arg' option" 528 fi 529 INCLUDEDIR="$2" 530 shift ;; 531 libdir=?*) LIBDIR="$LONG_OPTARG" ;; 532 libdir) 533 if [ "$#" -lt 2 ]; then 534 usage "No argument given for '--$arg' option" 535 fi 536 LIBDIR="$2" 537 shift ;; 538 datarootdir=?*) DATAROOTDIR="$LONG_OPTARG" ;; 539 datarootdir) 540 if [ "$#" -lt 2 ]; then 541 usage "No argument given for '--$arg' option" 542 fi 543 DATAROOTDIR="$2" 544 shift ;; 545 datadir=?*) DATADIR="$LONG_OPTARG" ;; 546 datadir) 547 if [ "$#" -lt 2 ]; then 548 usage "No argument given for '--$arg' option" 549 fi 550 DATADIR="$2" 551 shift ;; 552 mandir=?*) MANDIR="$LONG_OPTARG" ;; 553 mandir) 554 if [ "$#" -lt 2 ]; then 555 usage "No argument given for '--$arg' option" 556 fi 557 MANDIR="$2" 558 shift ;; 559 man1dir=?*) MAN1DIR="$LONG_OPTARG" ;; 560 man1dir) 561 if [ "$#" -lt 2 ]; then 562 usage "No argument given for '--$arg' option" 563 fi 564 MAN1DIR="$2" 565 shift ;; 566 man3dir=?*) MAN3DIR="$LONG_OPTARG" ;; 567 man3dir) 568 if [ "$#" -lt 2 ]; then 569 usage "No argument given for '--$arg' option" 570 fi 571 MAN3DIR="$2" 572 shift ;; 573 localedir=?*) LOCALEDIR="$LONG_OPTARG" ;; 574 localedir) 575 if [ "$#" -lt 2 ]; then 576 usage "No argument given for '--$arg' option" 577 fi 578 LOCALEDIR="$2" 579 shift ;; 580 karatsuba-len=?*) karatsuba_len="$LONG_OPTARG" ;; 581 karatsuba-len) 582 if [ "$#" -lt 2 ]; then 583 usage "No argument given for '--$arg' option" 584 fi 585 karatsuba_len="$1" 586 shift ;; 587 opt=?*) optimization="$LONG_OPTARG" ;; 588 opt) 589 if [ "$#" -lt 2 ]; then 590 usage "No argument given for '--$arg' option" 591 fi 592 optimization="$1" 593 shift ;; 594 disable-bc) dc_only=1 ;; 595 disable-dc) bc_only=1 ;; 596 disable-clean) clean=0 ;; 597 disable-extra-math) extra_math=0 ;; 598 disable-generated-tests) generate_tests=0 ;; 599 disable-history) hist=0 ;; 600 disable-man-pages) install_manpages=0 ;; 601 disable-nls) nls=0 ;; 602 disable-prompt) prompt=0 ;; 603 disable-strip) strip_bin=0 ;; 604 enable-test-timing) time_tests=1 ;; 605 enable-valgrind) vg=1 ;; 606 enable-fuzz-mode) fuzz=1 ;; 607 enable-memcheck) memcheck=1 ;; 608 install-all-locales) all_locales=1 ;; 609 help* | bc-only* | dc-only* | coverage* | debug*) 610 usage "No arg allowed for --$arg option" ;; 611 disable-bc* | disable-dc* | disable-clean*) 612 usage "No arg allowed for --$arg option" ;; 613 disable-extra-math*) 614 usage "No arg allowed for --$arg option" ;; 615 disable-generated-tests* | disable-history*) 616 usage "No arg allowed for --$arg option" ;; 617 disable-man-pages* | disable-nls* | disable-strip*) 618 usage "No arg allowed for --$arg option" ;; 619 enable-fuzz-mode* | enable-test-timing* | enable-valgrind*) 620 usage "No arg allowed for --$arg option" ;; 621 enable-memcheck* | install-all-locales*) 622 usage "No arg allowed for --$arg option" ;; 623 '') break ;; # "--" terminates argument processing 624 * ) usage "Invalid option $LONG_OPTARG" ;; 625 esac 626 shift 627 OPTIND=1 ;; 628 ?) usage "Invalid option $opt" ;; 629 esac 630 631done 632 633if [ "$clean" -ne 0 ]; then 634 if [ -f ./Makefile ]; then 635 make clean_config > /dev/null 636 fi 637fi 638 639if [ "$bc_only" -eq 1 ] && [ "$dc_only" -eq 1 ]; then 640 usage "Can only specify one of -b(-D) or -d(-B)" 641fi 642 643if [ "$library" -ne 0 ]; then 644 if [ "$bc_only" -eq 1 ] || [ "$dc_only" -eq 1 ]; then 645 usage "Must not specify -b(-D) or -d(-B) when building the library" 646 fi 647fi 648 649case $karatsuba_len in 650 (*[!0-9]*|'') usage "KARATSUBA_LEN is not a number" ;; 651 (*) ;; 652esac 653 654if [ "$karatsuba_len" -lt 16 ]; then 655 usage "KARATSUBA_LEN is less than 16" 656fi 657 658set -e 659 660if [ -z "${LONG_BIT+set}" ]; then 661 LONG_BIT_DEFINE="" 662elif [ "$LONG_BIT" -lt 32 ]; then 663 usage "LONG_BIT is less than 32" 664else 665 LONG_BIT_DEFINE="-DBC_LONG_BIT=\$(BC_LONG_BIT)" 666fi 667 668if [ -z "$CC" ]; then 669 CC="c99" 670else 671 ccbase=$(basename "$CC") 672 suffix=" *" 673 prefix="* " 674 675 if [ "${ccbase%%$suffix}" != "$ccbase" ]; then 676 ccflags="${ccbase#$prefix}" 677 cc="${ccbase%%$suffix}" 678 ccdir=$(dirname "$CC") 679 if [ "$ccdir" = "." ] && [ "${CC#.}" = "$CC" ]; then 680 ccdir="" 681 else 682 ccdir="$ccdir/" 683 fi 684 CC="${ccdir}${cc}" 685 CFLAGS="$CFLAGS $ccflags" 686 fi 687fi 688 689if [ -z "$HOSTCC" ] && [ -z "$HOST_CC" ]; then 690 HOSTCC="$CC" 691elif [ -z "$HOSTCC" ]; then 692 HOSTCC="$HOST_CC" 693fi 694 695if [ "$HOSTCC" != "$CC" ]; then 696 ccbase=$(basename "$HOSTCC") 697 suffix=" *" 698 prefix="* " 699 700 if [ "${ccbase%%$suffix}" != "$ccbase" ]; then 701 ccflags="${ccbase#$prefix}" 702 cc="${ccbase%%$suffix}" 703 ccdir=$(dirname "$HOSTCC") 704 if [ "$ccdir" = "." ] && [ "${HOSTCC#.}" = "$HOSTCC" ]; then 705 ccdir="" 706 else 707 ccdir="$ccdir/" 708 fi 709 HOSTCC="${ccdir}${cc}" 710 HOSTCFLAGS="$HOSTCFLAGS $ccflags" 711 fi 712fi 713 714if [ -z "${HOSTCFLAGS+set}" ] && [ -z "${HOST_CFLAGS+set}" ]; then 715 HOSTCFLAGS="$CFLAGS" 716elif [ -z "${HOSTCFLAGS+set}" ]; then 717 HOSTCFLAGS="$HOST_CFLAGS" 718fi 719 720link="@printf 'No link necessary\\\\n'" 721main_exec="BC" 722executable="BC_EXEC" 723 724tests="test_bc timeconst test_dc" 725 726bc_test="@tests/all.sh bc $extra_math 1 $generate_tests 0 \$(BC_EXEC)" 727dc_test="@tests/all.sh dc $extra_math 1 $generate_tests 0 \$(DC_EXEC)" 728 729timeconst="@tests/bc/timeconst.sh tests/bc/scripts/timeconst.bc \$(BC_EXEC)" 730 731# In order to have cleanup at exit, we need to be in 732# debug mode, so don't run valgrind without that. 733if [ "$vg" -ne 0 ]; then 734 debug=1 735 bc_test_exec='valgrind $(VALGRIND_ARGS) $(BC_EXEC)' 736 dc_test_exec='valgrind $(VALGRIND_ARGS) $(DC_EXEC)' 737else 738 bc_test_exec='$(BC_EXEC)' 739 dc_test_exec='$(DC_EXEC)' 740fi 741 742karatsuba="@printf 'karatsuba cannot be run because one of bc or dc is not built\\\\n'" 743karatsuba_test="@printf 'karatsuba cannot be run because one of bc or dc is not built\\\\n'" 744 745bc_lib="\$(GEN_DIR)/lib.o" 746bc_help="\$(GEN_DIR)/bc_help.o" 747dc_help="\$(GEN_DIR)/dc_help.o" 748 749default_target_prereqs="\$(BIN) \$(OBJS)" 750default_target_cmd="\$(CC) \$(CFLAGS) \$(OBJS) \$(LDFLAGS) -o \$(EXEC)" 751default_target="\$(DC_EXEC)" 752 753second_target_prereqs="" 754second_target_cmd="$default_target_cmd" 755second_target="\$(BC_EXEC)" 756 757if [ "$library" -ne 0 ]; then 758 759 extra_math=1 760 nls=0 761 hist=0 762 prompt=0 763 bc=1 764 dc=1 765 766 default_target_prereqs="\$(BIN) \$(OBJ)" 767 default_target_cmd="ar -r -cu \$(LIBBC) \$(OBJ)" 768 default_target="\$(LIBBC)" 769 tests="test_library" 770 771elif [ "$bc_only" -eq 1 ]; then 772 773 bc=1 774 dc=0 775 776 dc_help="" 777 778 executables="bc" 779 780 dc_test="@printf 'No dc tests to run\\\\n'" 781 782 install_prereqs=" install_execs" 783 install_man_prereqs=" install_bc_manpage" 784 uninstall_prereqs=" uninstall_bc" 785 uninstall_man_prereqs=" uninstall_bc_manpage" 786 787 default_target="\$(BC_EXEC)" 788 second_target="\$(DC_EXEC)" 789 tests="test_bc timeconst" 790 791elif [ "$dc_only" -eq 1 ]; then 792 793 bc=0 794 dc=1 795 796 bc_lib="" 797 bc_help="" 798 799 executables="dc" 800 801 main_exec="DC" 802 executable="DC_EXEC" 803 804 bc_test="@printf 'No bc tests to run\\\\n'" 805 806 timeconst="@printf 'timeconst cannot be run because bc is not built\\\\n'" 807 808 install_prereqs=" install_execs" 809 install_man_prereqs=" install_dc_manpage" 810 uninstall_prereqs=" uninstall_dc" 811 uninstall_man_prereqs=" uninstall_dc_manpage" 812 813 tests="test_dc" 814 815else 816 817 bc=1 818 dc=1 819 820 executables="bc and dc" 821 822 karatsuba="@\$(KARATSUBA) 30 0 \$(BC_EXEC)" 823 karatsuba_test="@\$(KARATSUBA) 1 100 \$(BC_EXEC)" 824 825 if [ "$library" -eq 0 ]; then 826 install_prereqs=" install_execs" 827 install_man_prereqs=" install_bc_manpage install_dc_manpage" 828 uninstall_prereqs=" uninstall_bc uninstall_dc" 829 uninstall_man_prereqs=" uninstall_bc_manpage uninstall_dc_manpage" 830 else 831 install_prereqs=" install_library install_bcl_header" 832 install_man_prereqs=" install_bcl_manpage" 833 uninstall_prereqs=" uninstall_library uninstall_bcl_header" 834 uninstall_man_prereqs=" uninstall_bcl_manpage" 835 tests="test_library" 836 fi 837 838 second_target_prereqs="$default_target_prereqs" 839 default_target_prereqs="$second_target" 840 default_target_cmd="\$(LINK) \$(BIN) \$(EXEC_PREFIX)\$(DC)" 841 842fi 843 844if [ "$fuzz" -ne 0 ]; then 845 debug=1 846 hist=0 847 prompt=0 848 nls=0 849 optimization="3" 850fi 851 852if [ "$debug" -eq 1 ]; then 853 854 if [ -z "$CFLAGS" ] && [ -z "$optimization" ]; then 855 CFLAGS="-O0" 856 fi 857 858 CFLAGS="-g $CFLAGS" 859 860else 861 CPPFLAGS="-DNDEBUG $CPPFLAGS" 862 if [ "$strip_bin" -ne 0 ]; then 863 LDFLAGS="-s $LDFLAGS" 864 fi 865fi 866 867if [ -n "$optimization" ]; then 868 CFLAGS="-O$optimization $CFLAGS" 869fi 870 871if [ "$coverage" -eq 1 ]; then 872 873 if [ "$bc_only" -eq 1 ] || [ "$dc_only" -eq 1 ]; then 874 usage "Can only specify -c without -b or -d" 875 fi 876 877 CFLAGS="-fprofile-arcs -ftest-coverage -g -O0 $CFLAGS" 878 CPPFLAGS="-DNDEBUG $CPPFLAGS" 879 880 COVERAGE_OUTPUT="@gcov -pabcdf \$(GCDA) \$(BC_GCDA) \$(DC_GCDA) \$(HISTORY_GCDA) \$(RAND_GCDA)" 881 COVERAGE_OUTPUT="$COVERAGE_OUTPUT;\$(RM) -f \$(GEN)*.gc*" 882 COVERAGE_OUTPUT="$COVERAGE_OUTPUT;gcovr --html-details --output index.html" 883 COVERAGE_PREREQS=" test coverage_output" 884 885else 886 COVERAGE_OUTPUT="@printf 'Coverage not generated\\\\n'" 887 COVERAGE_PREREQS="" 888fi 889 890if [ -z "${DESTDIR+set}" ]; then 891 destdir="" 892else 893 destdir="DESTDIR = $DESTDIR" 894fi 895 896if [ -z "${PREFIX+set}" ]; then 897 PREFIX="/usr/local" 898fi 899 900if [ -z "${BINDIR+set}" ]; then 901 BINDIR="$PREFIX/bin" 902fi 903 904if [ -z "${INCLUDEDIR+set}" ]; then 905 INCLUDEDIR="$PREFIX/include" 906fi 907 908if [ -z "${LIBDIR+set}" ]; then 909 LIBDIR="$PREFIX/lib" 910fi 911 912if [ "$install_manpages" -ne 0 ] || [ "$nls" -ne 0 ]; then 913 if [ -z "${DATAROOTDIR+set}" ]; then 914 DATAROOTDIR="$PREFIX/share" 915 fi 916fi 917 918if [ "$install_manpages" -ne 0 ]; then 919 920 if [ -z "${DATADIR+set}" ]; then 921 DATADIR="$DATAROOTDIR" 922 fi 923 924 if [ -z "${MANDIR+set}" ]; then 925 MANDIR="$DATADIR/man" 926 fi 927 928 if [ -z "${MAN1DIR+set}" ]; then 929 MAN1DIR="$MANDIR/man1" 930 fi 931 932 if [ -z "${MAN3DIR+set}" ]; then 933 MAN3DIR="$MANDIR/man3" 934 fi 935 936else 937 install_man_prereqs="" 938 uninstall_man_prereqs="" 939fi 940 941if [ "$nls" -ne 0 ]; then 942 943 set +e 944 945 printf 'Testing NLS...\n' 946 947 flags="-DBC_ENABLE_NLS=1 -DBC_ENABLED=$bc -DDC_ENABLED=$dc" 948 flags="$flags -DBC_ENABLE_HISTORY=$hist" 949 flags="$flags -DBC_ENABLE_EXTRA_MATH=$extra_math -I./include/" 950 flags="$flags -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700" 951 952 "$CC" $CPPFLAGS $CFLAGS $flags -c "src/vm.c" -o "$scriptdir/vm.o" > /dev/null 2>&1 953 954 err="$?" 955 956 rm -rf "$scriptdir/vm.o" 957 958 # If this errors, it is probably because of building on Windows, 959 # and NLS is not supported on Windows, so disable it. 960 if [ "$err" -ne 0 ]; then 961 printf 'NLS does not work.\n' 962 if [ $force -eq 0 ]; then 963 printf 'Disabling NLS...\n\n' 964 nls=0 965 else 966 printf 'Forcing NLS...\n\n' 967 fi 968 else 969 printf 'NLS works.\n\n' 970 971 printf 'Testing gencat...\n' 972 gencat "$scriptdir/en_US.cat" "$scriptdir/locales/en_US.msg" > /dev/null 2>&1 973 974 err="$?" 975 976 rm -rf "$scriptdir/en_US.cat" 977 978 if [ "$err" -ne 0 ]; then 979 printf 'gencat does not work.\n' 980 if [ $force -eq 0 ]; then 981 printf 'Disabling NLS...\n\n' 982 nls=0 983 else 984 printf 'Forcing NLS...\n\n' 985 fi 986 else 987 988 printf 'gencat works.\n\n' 989 990 if [ "$HOSTCC" != "$CC" ]; then 991 printf 'Cross-compile detected.\n\n' 992 printf 'WARNING: Catalog files generated with gencat may not be portable\n' 993 printf ' across different architectures.\n\n' 994 fi 995 996 if [ -z "$NLSPATH" ]; then 997 NLSPATH="/usr/share/locale/%L/%N" 998 fi 999 1000 install_locales_prereqs=" install_locales" 1001 uninstall_locales_prereqs=" uninstall_locales" 1002 1003 fi 1004 1005 fi 1006 1007 set -e 1008 1009else 1010 install_locales_prereqs="" 1011 uninstall_locales_prereqs="" 1012 all_locales=0 1013fi 1014 1015if [ "$nls" -ne 0 ] && [ "$all_locales" -ne 0 ]; then 1016 install_locales="\$(LOCALE_INSTALL) -l \$(NLSPATH) \$(MAIN_EXEC) \$(DESTDIR)" 1017else 1018 install_locales="\$(LOCALE_INSTALL) \$(NLSPATH) \$(MAIN_EXEC) \$(DESTDIR)" 1019fi 1020 1021if [ "$hist" -eq 1 ]; then 1022 1023 set +e 1024 1025 printf 'Testing history...\n' 1026 1027 flags="-DBC_ENABLE_HISTORY=1 -DBC_ENABLED=$bc -DDC_ENABLED=$dc" 1028 flags="$flags -DBC_ENABLE_NLS=$nls -DBC_ENABLE_LIBRARY=0" 1029 flags="$flags -DBC_ENABLE_EXTRA_MATH=$extra_math -I./include/" 1030 flags="$flags -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700" 1031 1032 "$CC" $CPPFLAGS $CFLAGS $flags -c "src/history.c" -o "$scriptdir/history.o" > /dev/null 2>&1 1033 1034 err="$?" 1035 1036 rm -rf "$scriptdir/history.o" 1037 1038 # If this errors, it is probably because of building on Windows, 1039 # and history is not supported on Windows, so disable it. 1040 if [ "$err" -ne 0 ]; then 1041 printf 'History does not work.\n' 1042 if [ $force -eq 0 ]; then 1043 printf 'Disabling history...\n\n' 1044 hist=0 1045 else 1046 printf 'Forcing history...\n\n' 1047 fi 1048 else 1049 printf 'History works.\n\n' 1050 fi 1051 1052 set -e 1053 1054fi 1055 1056if [ "$library" -eq 1 ]; then 1057 bc_lib="" 1058fi 1059 1060if [ "$extra_math" -eq 1 ] && [ "$bc" -ne 0 ] && [ "$library" -eq 0 ]; then 1061 BC_LIB2_O="\$(GEN_DIR)/lib2.o" 1062else 1063 BC_LIB2_O="" 1064fi 1065 1066GEN="strgen" 1067GEN_EXEC_TARGET="\$(HOSTCC) \$(HOSTCFLAGS) -o \$(GEN_EXEC) \$(GEN_C)" 1068CLEAN_PREREQS=" clean_gen" 1069 1070if [ -z "${GEN_HOST+set}" ]; then 1071 GEN_HOST=1 1072else 1073 if [ "$GEN_HOST" -eq 0 ]; then 1074 GEN="strgen.sh" 1075 GEN_EXEC_TARGET="@printf 'Do not need to build gen/strgen.c\\\\n'" 1076 CLEAN_PREREQS="" 1077 fi 1078fi 1079 1080manpage_args="" 1081unneeded="" 1082headers="\$(HEADERS)" 1083 1084if [ "$extra_math" -eq 0 ]; then 1085 manpage_args="E" 1086 unneeded="$unneeded rand.c" 1087else 1088 headers="$headers \$(EXTRA_MATH_HEADERS)" 1089fi 1090 1091if [ "$hist" -eq 0 ]; then 1092 manpage_args="${manpage_args}H" 1093 unneeded="$unneeded history.c" 1094else 1095 headers="$headers \$(HISTORY_HEADERS)" 1096fi 1097 1098if [ "$nls" -eq 0 ]; then 1099 manpage_args="${manpage_args}N" 1100fi 1101 1102if [ "$prompt" -eq 0 ]; then 1103 manpage_args="${manpage_args}P" 1104fi 1105 1106if [ "$bc" -eq 0 ]; then 1107 unneeded="$unneeded bc.c bc_lex.c bc_parse.c" 1108else 1109 headers="$headers \$(BC_HEADERS)" 1110fi 1111 1112if [ "$dc" -eq 0 ]; then 1113 unneeded="$unneeded dc.c dc_lex.c dc_parse.c" 1114else 1115 headers="$headers \$(DC_HEADERS)" 1116fi 1117 1118if [ "$library" -ne 0 ]; then 1119 unneeded="$unneeded args.c opt.c read.c file.c main.c" 1120 unneeded="$unneeded lang.c lex.c parse.c program.c" 1121 unneeded="$unneeded bc.c bc_lex.c bc_parse.c" 1122 unneeded="$unneeded dc.c dc_lex.c dc_parse.c" 1123 headers="$headers \$(LIBRARY_HEADERS)" 1124else 1125 unneeded="$unneeded library.c" 1126fi 1127 1128if [ "$manpage_args" = "" ]; then 1129 manpage_args="A" 1130fi 1131 1132if [ "$vg" -ne 0 ]; then 1133 memcheck=1 1134fi 1135 1136bc_tests=$(gen_test_targets bc) 1137bc_script_tests=$(gen_script_test_targets bc) 1138dc_tests=$(gen_test_targets dc) 1139dc_script_tests=$(gen_script_test_targets dc) 1140 1141# Print out the values; this is for debugging. 1142if [ "$bc" -ne 0 ]; then 1143 printf 'Building bc\n' 1144else 1145 printf 'Not building bc\n' 1146fi 1147if [ "$dc" -ne 0 ]; then 1148 printf 'Building dc\n' 1149else 1150 printf 'Not building dc\n' 1151fi 1152printf '\n' 1153printf 'BC_ENABLE_LIBRARY=%s\n\n' "$library" 1154printf 'BC_ENABLE_HISTORY=%s\n' "$hist" 1155printf 'BC_ENABLE_EXTRA_MATH=%s\n' "$extra_math" 1156printf 'BC_ENABLE_NLS=%s\n' "$nls" 1157printf 'BC_ENABLE_PROMPT=%s\n' "$prompt" 1158printf 'BC_ENABLE_AFL=%s\n' "$fuzz" 1159printf '\n' 1160printf 'BC_NUM_KARATSUBA_LEN=%s\n' "$karatsuba_len" 1161printf '\n' 1162printf 'CC=%s\n' "$CC" 1163printf 'CFLAGS=%s\n' "$CFLAGS" 1164printf 'HOSTCC=%s\n' "$HOSTCC" 1165printf 'HOSTCFLAGS=%s\n' "$HOSTCFLAGS" 1166printf 'CPPFLAGS=%s\n' "$CPPFLAGS" 1167printf 'LDFLAGS=%s\n' "$LDFLAGS" 1168printf 'PREFIX=%s\n' "$PREFIX" 1169printf 'BINDIR=%s\n' "$BINDIR" 1170printf 'INCLUDEDIR=%s\n' "$INCLUDEDIR" 1171printf 'LIBDIR=%s\n' "$LIBDIR" 1172printf 'DATAROOTDIR=%s\n' "$DATAROOTDIR" 1173printf 'DATADIR=%s\n' "$DATADIR" 1174printf 'MANDIR=%s\n' "$MANDIR" 1175printf 'MAN1DIR=%s\n' "$MAN1DIR" 1176printf 'MAN3DIR=%s\n' "$MAN3DIR" 1177printf 'NLSPATH=%s\n' "$NLSPATH" 1178printf 'EXECSUFFIX=%s\n' "$EXECSUFFIX" 1179printf 'EXECPREFIX=%s\n' "$EXECPREFIX" 1180printf 'DESTDIR=%s\n' "$DESTDIR" 1181printf 'LONG_BIT=%s\n' "$LONG_BIT" 1182printf 'GEN_HOST=%s\n' "$GEN_HOST" 1183printf 'GEN_EMU=%s\n' "$GEN_EMU" 1184 1185contents=$(cat "$scriptdir/Makefile.in") 1186 1187needle="WARNING" 1188replacement='*** WARNING: Autogenerated from Makefile.in. DO NOT MODIFY ***' 1189 1190contents=$(replace "$contents" "$needle" "$replacement") 1191 1192if [ "$unneeded" = "" ]; then 1193 unneeded="library.c" 1194fi 1195 1196contents=$(gen_file_list "$contents" $unneeded) 1197 1198SRC_TARGETS="" 1199 1200src_files=$(find_src_files $unneeded) 1201 1202for f in $src_files; do 1203 o=$(replace_ext "$f" "c" "o") 1204 SRC_TARGETS=$(printf '%s\n\n%s: %s %s\n\t$(CC) $(CFLAGS) -o %s -c %s\n' \ 1205 "$SRC_TARGETS" "$o" "$headers" "$f" "$o" "$f") 1206done 1207 1208contents=$(replace "$contents" "HEADERS" "$headers") 1209 1210contents=$(replace "$contents" "BC_ENABLED" "$bc") 1211contents=$(replace "$contents" "DC_ENABLED" "$dc") 1212 1213contents=$(replace "$contents" "BC_ALL_TESTS" "$bc_test") 1214contents=$(replace "$contents" "BC_TESTS" "$bc_tests") 1215contents=$(replace "$contents" "BC_SCRIPT_TESTS" "$bc_script_tests") 1216contents=$(replace "$contents" "BC_TEST_EXEC" "$bc_test_exec") 1217contents=$(replace "$contents" "TIMECONST_ALL_TESTS" "$timeconst") 1218 1219contents=$(replace "$contents" "DC_ALL_TESTS" "$dc_test") 1220contents=$(replace "$contents" "DC_TESTS" "$dc_tests") 1221contents=$(replace "$contents" "DC_SCRIPT_TESTS" "$dc_script_tests") 1222contents=$(replace "$contents" "DC_TEST_EXEC" "$dc_test_exec") 1223 1224contents=$(replace "$contents" "LIBRARY" "$library") 1225contents=$(replace "$contents" "HISTORY" "$hist") 1226contents=$(replace "$contents" "EXTRA_MATH" "$extra_math") 1227contents=$(replace "$contents" "NLS" "$nls") 1228contents=$(replace "$contents" "PROMPT" "$prompt") 1229contents=$(replace "$contents" "FUZZ" "$fuzz") 1230contents=$(replace "$contents" "MEMCHECK" "$memcheck") 1231 1232contents=$(replace "$contents" "BC_LIB_O" "$bc_lib") 1233contents=$(replace "$contents" "BC_HELP_O" "$bc_help") 1234contents=$(replace "$contents" "DC_HELP_O" "$dc_help") 1235contents=$(replace "$contents" "BC_LIB2_O" "$BC_LIB2_O") 1236contents=$(replace "$contents" "KARATSUBA_LEN" "$karatsuba_len") 1237 1238contents=$(replace "$contents" "NLSPATH" "$NLSPATH") 1239contents=$(replace "$contents" "DESTDIR" "$destdir") 1240contents=$(replace "$contents" "EXECSUFFIX" "$EXECSUFFIX") 1241contents=$(replace "$contents" "EXECPREFIX" "$EXECPREFIX") 1242contents=$(replace "$contents" "BINDIR" "$BINDIR") 1243contents=$(replace "$contents" "INCLUDEDIR" "$INCLUDEDIR") 1244contents=$(replace "$contents" "LIBDIR" "$LIBDIR") 1245contents=$(replace "$contents" "MAN1DIR" "$MAN1DIR") 1246contents=$(replace "$contents" "MAN3DIR" "$MAN3DIR") 1247contents=$(replace "$contents" "CFLAGS" "$CFLAGS") 1248contents=$(replace "$contents" "HOSTCFLAGS" "$HOSTCFLAGS") 1249contents=$(replace "$contents" "CPPFLAGS" "$CPPFLAGS") 1250contents=$(replace "$contents" "LDFLAGS" "$LDFLAGS") 1251contents=$(replace "$contents" "CC" "$CC") 1252contents=$(replace "$contents" "HOSTCC" "$HOSTCC") 1253contents=$(replace "$contents" "COVERAGE_OUTPUT" "$COVERAGE_OUTPUT") 1254contents=$(replace "$contents" "COVERAGE_PREREQS" "$COVERAGE_PREREQS") 1255contents=$(replace "$contents" "INSTALL_PREREQS" "$install_prereqs") 1256contents=$(replace "$contents" "INSTALL_MAN_PREREQS" "$install_man_prereqs") 1257contents=$(replace "$contents" "INSTALL_LOCALES" "$install_locales") 1258contents=$(replace "$contents" "INSTALL_LOCALES_PREREQS" "$install_locales_prereqs") 1259contents=$(replace "$contents" "UNINSTALL_MAN_PREREQS" "$uninstall_man_prereqs") 1260contents=$(replace "$contents" "UNINSTALL_PREREQS" "$uninstall_prereqs") 1261contents=$(replace "$contents" "UNINSTALL_LOCALES_PREREQS" "$uninstall_locales_prereqs") 1262 1263contents=$(replace "$contents" "DEFAULT_TARGET" "$default_target") 1264contents=$(replace "$contents" "DEFAULT_TARGET_PREREQS" "$default_target_prereqs") 1265contents=$(replace "$contents" "DEFAULT_TARGET_CMD" "$default_target_cmd") 1266contents=$(replace "$contents" "SECOND_TARGET" "$second_target") 1267contents=$(replace "$contents" "SECOND_TARGET_PREREQS" "$second_target_prereqs") 1268contents=$(replace "$contents" "SECOND_TARGET_CMD" "$second_target_cmd") 1269 1270contents=$(replace "$contents" "ALL_PREREQ" "$ALL_PREREQ") 1271contents=$(replace "$contents" "BC_EXEC_PREREQ" "$bc_exec_prereq") 1272contents=$(replace "$contents" "BC_EXEC_CMD" "$bc_exec_cmd") 1273contents=$(replace "$contents" "DC_EXEC_PREREQ" "$dc_exec_prereq") 1274contents=$(replace "$contents" "DC_EXEC_CMD" "$dc_exec_cmd") 1275 1276contents=$(replace "$contents" "EXECUTABLES" "$executables") 1277contents=$(replace "$contents" "MAIN_EXEC" "$main_exec") 1278contents=$(replace "$contents" "EXEC" "$executable") 1279contents=$(replace "$contents" "TESTS" "$tests") 1280 1281contents=$(replace "$contents" "BC_TEST" "$bc_test") 1282contents=$(replace "$contents" "DC_TEST" "$dc_test") 1283 1284contents=$(replace "$contents" "VG_BC_TEST" "$vg_bc_test") 1285contents=$(replace "$contents" "VG_DC_TEST" "$vg_dc_test") 1286 1287contents=$(replace "$contents" "TIMECONST" "$timeconst") 1288 1289contents=$(replace "$contents" "KARATSUBA" "$karatsuba") 1290contents=$(replace "$contents" "KARATSUBA_TEST" "$karatsuba_test") 1291 1292contents=$(replace "$contents" "LONG_BIT" "$LONG_BIT") 1293contents=$(replace "$contents" "LONG_BIT_DEFINE" "$LONG_BIT_DEFINE") 1294 1295contents=$(replace "$contents" "GEN" "$GEN") 1296contents=$(replace "$contents" "GEN_EXEC_TARGET" "$GEN_EXEC_TARGET") 1297contents=$(replace "$contents" "CLEAN_PREREQS" "$CLEAN_PREREQS") 1298contents=$(replace "$contents" "GEN_EMU" "$GEN_EMU") 1299 1300printf '%s\n%s\n\n' "$contents" "$SRC_TARGETS" > "$scriptdir/Makefile" 1301 1302if [ "$bc" -ne 0 ]; then 1303 gen_tests bc BC "$extra_math" "$time_tests" $bc_test_exec 1304 gen_script_tests bc "$extra_math" "$generate_tests" "$time_tests" $bc_test_exec 1305fi 1306 1307if [ "$dc" -ne 0 ]; then 1308 gen_tests dc DC "$extra_math" "$time_tests" $dc_test_exec 1309 gen_script_tests dc "$extra_math" "$generate_tests" "$time_tests" $dc_test_exec 1310fi 1311 1312cd "$scriptdir" 1313 1314cp -f manuals/bc/$manpage_args.1.md manuals/bc.1.md 1315cp -f manuals/bc/$manpage_args.1 manuals/bc.1 1316cp -f manuals/dc/$manpage_args.1.md manuals/dc.1.md 1317cp -f manuals/dc/$manpage_args.1 manuals/dc.1 1318 1319make clean > /dev/null 1320